Loading ...

Loading ...

Search in: Commercial Category

Country of Origin: US, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, ASSE Approved, C.E.C. Listed, CSA International (Formerly AGA/CGA), CSA LLC-LOW Lead Content, Application: Commercial Application, Includes: Thermostatic Mixing Valve, Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank, 1 Year Limited on Component Parts, Heating Capacity: 80000, Gas Connection: 1/2, Tank Capacity: 55, Vent Size: 4, Recovery Rate: 78, Energy Efficiency: 82, Pressure Rating: 150, Type: Light Duty Energy Saver High Performance, Fuel Type: Natural, Vent Type: Atmospheric, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-1/4 in D x 59-5/8 in H High input combustion system - Generates enough hot water for mop sinks, wash tubs and large wash sinks in addition to standard commercial duty, Helical fin flue - Designed to maximize the amount of heat transferred to water decreasing recovery time, Minimizes air movement in the heater during standby periods to retard heat loss up the flue, Factory installed Hydrojet 2 total performance system - Cold water inlet sediment reducing device helps prevent sediment build-up in tank, Vitraglas lining - Bradford White water heater tanks are protected from the corrosive effects of hot water by an exclusive ceramic porcelain-like coating, The Bradford White high silica Vitraglas lining provides a tough interior surface for our hot water tanks, Fully automatic controls - Automatic temperature selection at your fingertips (up to 180 deg F), Built-in energy cut off switch prevents abnormally high water temperature for extra safety, Built-in gas pressure regulation, 3/4 in NPT side connections, Non-CFC foam insulation - 1 in of energy saving insulation covers the sides and top of the tank, reducing the amount of heat loss while increasing jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings, Two protective magnesium anode rods, 4 in snap lock draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White
Mfg Standards/Approvals: ASHRAE, CEC, cETLus Listed, CSA Certified, NSF Approved, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Year Limited Tank and 1 Year Limited on Component Parts, Tank Capacity: 119, Water Connection: 1-1/2, Temperature Rating: 1600, Type: Heavy Duty, Series: ElectriFLEX HD CEHD, Electrical Rating: 208/240/277/380/415/480/600 V, Power Rating: 54 kW, Phase: 1/3, Heating Element: Magnesium Anode Rod, Recovery Rate: 248 gph at 90 deg F, Material: Steel, Finish: Vitraglas, Dimensions: 30-1/4 Inch Dia x 66-3/4 Inch H, Domestic/Import: Domestic ElectriFLEX Series field convertible commercial electric water heaters provide an incredible level of flexibility, Immersion thermostats - immersion type for accurate temperature control from up to 180 deg F (82 deg C) with manual reset high limit control, Conversion kits - design certified by ETL for field conversion, conversion kits are available to convert any one model to a variety of voltages, kW inputs and phase, 3 Inch (76mm) non-CFC foam insulation - covers the sides and top of tank, reducing the amount of heat loss which results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water connections - factory installed true dielectric fittings extend water heater life and eases installation, Elements - screw in style low watt density incoloy sheathed elements standard, these elements resist burnout caused by dry fire or lime buildup, Two magnesium anode rods - provide added protection against corrosion for long trouble free service, Hand hole cleanout - allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - durable tamper proof design, Completely pre-wired - with pressure lug terminal block eliminating need for splicing or taping of wires, Internal fusing - standard on all models Bradford White
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 193.9, Energy Efficiency: 82, Water Connection: 1-1/2, Temperature Rating: 180, Series: D-100L-199-3N, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater Bradford White 671632688098
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), Low NOx Compliance, North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 193.9, Energy Efficiency: 82, Water Connection: 1-1/2, Temperature Rating: 180, Series: D-100L-199-E3N, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater Bradford White 671632688210
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 606, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve Bradford White 671632257553
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, ASME HLW, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 242.4, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater, ASME construction Bradford White 671632257850
Country of Origin: US, Package Length: 35.5, Package Height: 82.0, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 300000, Gas Connection: 3/4, Tank Capacity: 75, Vent Size: 7, Recovery Rate: 727, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 74-3/4 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve Bradford White 671632262724
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 399999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 8, Recovery Rate: 387.9, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 71-1/2 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater Bradford White 671632263325
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, ASME Standard, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 399999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 8, Recovery Rate: 970, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 72-1/2 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve, ASME construction Bradford White 671632262823
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, ASME HLW, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 505000, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 10, Recovery Rate: 489.7, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 69 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater, ASME construction Bradford White 671632265633
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 193.9, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.7 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper gas water heater Bradford White 671632081899
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 485, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve, 485 gph recovery at 40 deg F rise, 194 gph recovery at 100 deg F rise, 139 gph recovery at 140 deg F rise Bradford White 671632081905
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 485, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve, 485 gph recovery at 40 deg F rise, 194 gph recovery at 100 deg F rise, 139 gph recovery at 140 deg F rise Bradford White 671632285969
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 242.4, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.7 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper gas water heater Bradford White 671632262984
Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 597, Energy Efficiency: 98.5, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, Ultra high efficiency Bradford White
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), EnergyStar Certified, NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 293.9, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-100T-250E-3N eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater Bradford White 671632331802
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, ASME Standard, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 735, Energy Efficiency: 97, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, Ultra high efficiency, ASME construction Bradford White 671632332083
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 300000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 334.5, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-100T-300E-3N eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater Bradford White 671632331826
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, ASME HLW, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 300000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 334.5, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-100T-300E-3NA eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater, ASME construction Bradford White 671632529377
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, ASME Standard, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 399999, Gas Connection: 1, Tank Capacity: 100, Recovery Rate: 1127, Energy Efficiency: 94, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, Ultra high efficiency, ASME construction Bradford White 671632631834
Country of Origin: US, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 125000, Gas Connection: 3/4, Tank Capacity: 60, Recovery Rate: 364, Energy Efficiency: 96, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 57 in H Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, 364 gph recovery at 40 deg F rise, 145 gph recovery at 100 deg F rise, 104 gph recovery at 140 deg F rise, Ultra high efficiency Bradford White
Country of Origin: US, Package Length: 35.0, Package Height: 65.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 150000, Gas Connection: 3/4, Tank Capacity: 60, Recovery Rate: 169.1, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-60T-150E-3N eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 57 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater Bradford White 671632318759
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, ASME HLW, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Tank Capacity: 119, Voltage Rating: 208, Power Rating: 24000, Pressure Rating: 150, Temperature Rating: 180, Type: Heavy Duty, Series: CEHD120 (kW)3*CF, Water Connection: 1-1/2 in NPT, Recovery Rate: 248 gph at 40 deg F Rise, ASME Yes/No: Yes, Material: Steel, Dimensions: 30-1/4 in Dia x 66-3/4 in H Immersion thermostat - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Water connection - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Screw-in style low watt density Incoloy sheathed elements standard, Elements resist burnout caused by dry fire or lime buildup, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Internal fusing - Standard on all models, Heavy duty field convertible electric water heater Bradford White
Country of Origin: US, Package Length: 30.125, Package Height: 67.5625, Package Width: 28.875, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 119, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE2120T3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 28 in Dia x 64-1/4 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632813827
Country of Origin: US, Package Length: 22.375, Package Height: 51.5, Package Width: 22.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 50, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE250S3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Short, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 47-1/2 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632819393
Country of Origin: US, Package Length: 22.375, Package Height: 64.125, Package Width: 22.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 65, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE265T3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 60-1/4 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632826698
Country of Origin: US, Package Length: 24.375, Package Height: 64.125, Package Width: 24.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 80, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE280T3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 24 in Dia x 59-1/4 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632817993
Package Length: 22.845, Package Height: 59.25, Package Width: 24.4375, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 80000, Gas Connection: 1/2, Tank Capacity: 55, Vent Size: 4, Recovery Rate: 78, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Ultra Low NOx: No, Material: Steel, Dimensions: 22 in Dia x 59-1/2 in H, Domestic/Import: Domestic Bradford White ICON System (Excluding LG155H803N), Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Factory-installed Hydrojet total performance system, Vitraglas lining, Side connect model, Non-CFC foam insulation, Pedestal base (LG250H653N and LG275H763N), Water connections, Hand hole cleanout, Protective magnesium anode rod, Low restriction brass drain valve, Thermostatic mixing valve (ASSE approved), Atmospheric vent high input light duty gas water heater Bradford White 671632792931
Package Length: 35.5, Package Height: 71.0, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 85000, Gas Connection: 1/2, Tank Capacity: 100, Vent Size: 4, Recovery Rate: 82, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 69 in H, Domestic/Import: Domestic Bradford White ICON System (Excluding LG155H803N), Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Factory-installed Hydrojet total performance system, Vitraglas lining, Side connect model, Non-CFC foam insulation, Pedestal base (LG250H653N and LG275H763N), Water connections, Hand hole cleanout, Protective magnesium anode rod, Low restriction brass drain valve, Thermostatic mixing valve (ASSE approved), Atmospheric vent high input light duty gas water heater Bradford White 671632794874
Package Length: 29.5, Package Height: 60.3125, Package Width: 26.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 76000, Gas Connection: 1/2, Tank Capacity: 75, Vent Size: 4, Recovery Rate: 73.7, Temperature Rating: 180, Fuel Type: Natural, Vent Type: Atmospheric, Pressure Rating: 4 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 24 in Dia x 62-5/8 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Factory installed Hydrojet 2 sediment reduction system, Vitraglas lining, Side connect model, Non-CFC foam insulation, Pedestal base, Water connections, Protective magnesium anode rod, 4 in snap lock draft diverter, Low restriction brass drain valve, Light duty atmospheric vent high input gas water heater Bradford White 671632792924
Package Length: 29.5, Package Height: 60.3125, Package Width: 26.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 76000, Gas Connection: 1/2, Tank Capacity: 75, Vent Size: 4, Recovery Rate: 74, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Ultra Low NOx: No, Material: Steel, Dimensions: 24 in Dia x 62-5/8 in H, Domestic/Import: Domestic Bradford White ICON System (Excluding LG155H803N), Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Factory-installed Hydrojet total performance system, Vitraglas lining, Side connect model, Non-CFC foam insulation, Pedestal base (LG250H653N and LG275H763N), Water connections, Hand hole cleanout, Protective magnesium anode rod, Low restriction brass drain valve, Thermostatic mixing valve (ASSE approved), Atmospheric vent high input light duty gas water heater Bradford White 671632796144
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 119, Voltage Rating: 240, Amperage Rating: 43.4, Power Rating: 18000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-120-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (3) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 186 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 30-1/4 in Dia x 66 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 119, Voltage Rating: 240, Amperage Rating: 86.7, Power Rating: 36000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-120-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (6) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 372 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 30-1/4 in Dia x 66 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 50, Voltage Rating: 240, Amperage Rating: 43.4, Power Rating: 18000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-50-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (3) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 186 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 24 in Dia x 49-1/4 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 50, Voltage Rating: 240, Amperage Rating: 86.7, Power Rating: 36000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-50-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (6) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 372 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 24 in Dia x 49-1/4 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 50, Voltage Rating: 240, Amperage Rating: 130, Power Rating: 54000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-50-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (9) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 558 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 24 in Dia x 49-1/4 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 80, Voltage Rating: 240, Amperage Rating: 43.4, Power Rating: 18000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-80-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (3) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 186 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 26 in Dia x 61-3/4 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 80, Voltage Rating: 240, Amperage Rating: 86.7, Power Rating: 36000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-80-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (6) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 372 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 26 in Dia x 61-3/4 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 80, Voltage Rating: 240, Amperage Rating: 130, Power Rating: 54000, Phase: 3, Pressure Rating: 150, Temperature Rating: 180, Series: M-II-80-kW-3SF, Water Connection: 1-1/2 in NPT, Heating Element: (9) Screw-In Copper, Mounting Type: Surface, Recovery Rate: 558 gph at 40 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 26 in Dia x 61-3/4 in H, Domestic/Import: Domestic Fully automatic control - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, Insulation system - 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Cold water inlet sediment reducing device helps prevent sediment build-up in the tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water Connections - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Elements - Screw-in style, surface mounted thermostat models have elements made of nickel chromium wire embedded in magnesium oxide, sheathed in copper and electroplated to minimize degradation of the anode Bradford White
Mfg Standards/Approvals: AHRI Certified, CSA Certified, ENERGY STAR Qualified, NSF Certified, Type: Premium Condensing, Series: NPE, Heating Capacity: 15000 to 150000 Btu/hr, Fuel Type: Liquid Propane/Natural Gas, Gas Connection: 3/4 in NPT, Ignition Type: Electronic, Vent Type: Direct, Vent Size: 2 in, Flow Rate: 8.4 gpm, Energy Efficiency: 96%, Water Connection: 3/4 in NPT, Pressure Rating: 8 to 13 in WC Gas/15 to 150 psi Water, Material: Stainless Steel, Dimensions: 17.3 in W x 13.2 in D x 27.4 in H Field convertible gas system, Ultra condensing efficiency, Dual stainless steel heat exchanger, Low NOx emissions (<20ppm), Cascading capable, Naveen's Condensing Technology offers the high efficiency, Money and energy savings over tank type water heaters and traditional water heaters, Provides longer life expectancy as they are highly resistant to corrosion and erosion compared to copper heat exchangers, Reduces minerals deposits, New metal fiber burner is designed to deliver a consistent air/gas mixture improving combustion efficiency, Result in less acid rain and less green house effect, Comply with SCAQMD 1146.2 strict NOx emissions standard, 3 in vents can be used up to 150 ft with standard 2 x 3 in adapters, The negative pressure gas valve and fan with dual venturi operation allows for better adaptability to low gas pressure applications, Makes it possible for the NPE tankless water heater to be installed using 1/2 in gas lines up to 24 ft, PE tankless water heater models allow for easy convertibility from NG to LP, Simple modular for water path minimizes water pressure drop, Modular design for water path make maintenance easier and service can be performed easily in the field, Recognizes hot water usage patterns to intelligently provide hot water when needed KD Navien 884954974101
Mfg Standards/Approvals: AHRI Certified, CSA Certified, ENERGY STAR Qualified, NSF Certified, Type: Premium Condensing, Series: NPE, Heating Capacity: 19900 to 199900 Btu/hr, Fuel Type: Liquid Propane/Natural Gas, Gas Connection: 3/4 in NPT, Ignition Type: Electronic, Vent Type: Direct, Vent Size: 2 in, Flow Rate: 11.2 gpm, Energy Efficiency: 96%, Water Connection: 3/4 in NPT, Pressure Rating: 8 to 13 in WC Gas/15 to 150 psi Water, Material: Stainless Steel, Dimensions: 17.3 in W x 13.2 in D x 27.4 in H Field convertible gas system, Ultra condensing efficiency, Dual stainless steel heat exchanger, Low NOx emissions (<20ppm), Cascading capable, Naveen's Condensing Technology offers the high efficiency, Money and energy savings over tank type water heaters and traditional water heaters, Provides longer life expectancy as they are highly resistant to corrosion and erosion compared to copper heat exchangers, Reduces minerals deposits, New metal fiber burner is designed to deliver a consistent air/gas mixture improving combustion efficiency, Result in less acid rain and less green house effect, Comply with SCAQMD 1146.2 strict NOx emissions standard, 3 in vents can be used up to 150 ft with standard 2 x 3 in adapters, The negative pressure gas valve and fan with dual venturi operation allows for better adaptability to low gas pressure applications, Makes it possible for the NPE tankless water heater to be installed using 1/2 in gas lines up to 24 ft, PE tankless water heater models allow for easy convertibility from NG to LP, Simple modular for water path minimizes water pressure drop, Modular design for water path make maintenance easier and service can be performed easily in the field, Recognizes hot water usage patterns to intelligently provide hot water when needed KD Navien 884954974149