Mounting & Suspension Categories

Loading ...

Loading ...

Search in: Mounting & Suspension Category

Color: zinc plate CR. 6-free, Weight: 319.2 g, Packaging: 10 Pieces, Dimension (H x W x D): 0.295" x 39.37" x 1.387" WAGO
P1916.jpg 1" "S" Hook
Locke Part #: P1916 MFG Part #: SH12
ENGINEERED PRODUCTS
26.jpg 1" BEAM CLAMP 1/4" - 20
Locke Part #: P3448 MFG Part #: 26
MADISON ELECTRIC PRODUCTS INC 784297140266
0-WBA.jpg 1" HANGER W/BOLT
Locke Part #: P0497 MFG Part #: 2-WBA
MADISON ELECTRIC PRODUCTS INC 784297150623
J-hook, for CAT6a and higher cabling, Culus Listed and complies with NEC and TIA(SM) requirements for structured cabling systems, Cost-effective alternative to expensive cable tray, Pre-galvanized J-hooks provide smoother cable pull and greater corrosion resistance, Provides proper support of cabling CADDY
One fastener fits flanges 1/16" to 1/4", Installation: Hammer-on or install from the floor with the VAFT tool, Used to support 1/4 and 3/8 threaded rod from purlin beam flanges 1/16 thru 1/4 thick CADDY
Finish: Electro-Galvanized, Material: Mild Steel, Length: 10’, Diameter: 1/2", Thread: 13, Weight/100 Feet: 54 HAYDON CORP
Size: 1/2", Finish: Electro-Galvanized, Material: Mild Steel, Thread: 13, Thickness: 3/8", Channel: H-132, H-134, H-144, Weight/100 Pcs: 10 HAYDON CORP
Size: 1/2", Finish: Electro-Galvanized, Material: Mild Steel, Thread: 13, Thickness: 3/8", Channel: All H-Strut, Weight/100 Pcs: 9 HAYDON CORP
P1885.jpg 1/2" EMT Nail Straps
Locke Part #: P1885 MFG Part #: 1600
MADISON ELECTRIC PRODUCTS INC
M3331.jpg 1/2" Malleable Iron Ceiling Flange
Locke Part #: M3332 MFG Part #: 78101112258
COOPER B-LINE
P3226.jpg 1/2" Steel Coupler Nut
Locke Part #: P3228 MFG Part #: 74456
HAYDON CORP
Fig: 1 CADDY
Fig: 1 CADDY
Fig: 2 CADDY
P3221.jpg 1/2" x 15/16” Hex Head Cap Screw
Locke Part #: P3223 MFG Part #: MB121
DOTTIE, L.H.
Weight: .17 lbs, Finish: Electro-galvanized, Material: 1/4 x 1-5/8, Rod Size: 1/2, Standard Package: 100 HAYDON CORP
P4168.jpg 1/4" - 20 Thread Impression
Locke Part #: P4168 MFG Part #: 812M
Hole: 1/4" - 20, Conduit: 1/2" - 3/4" 812M Conduit Clip now has new finger close capability. 100 per box. CADDY
Finish: Electro-Galvanized, Material: Mild Steel, Length: 10’, Diameter: 1/4", Thread: 20, Weight/100 Feet: 12 HAYDON CORP
Size: 1/4", Finish: Electro-Galvanized, Material: Mild Steel, Thread: 20, Thickness: 1/4", Channel: H-132, H-134, H-142, Weight/100 Pcs: 7 HAYDON CORP
Size: 1/4", Finish: Electro-Galvanized, Material: Mild Steel, Thread: 20, Thickness: 1/4", Channel: All H-Strut, Weight/100 Pcs: 6 HAYDON CORP
P3218.jpg 1/4" Retainer Strut Nut
Locke Part #: P3218 MFG Part #: 72165
Top Retainer HAYDON CORP
P4121.jpg 1/4" Slick Strut Nut
Locke Part #: P4121 MFG Part #: SLICK250
CADDY
P3226.jpg 1/4" Steel Coupler Nut
Locke Part #: P3226 MFG Part #: 74457
HAYDON CORP
P3221.jpg 1/4" x 1" Hex Head Cap Screw
Locke Part #: P3221 MFG Part #: MB141
DOTTIE, L.H.
Weight: .18 lbs, Finish: Electro-galvanized, Material: 1/4 x 1-5/8, Rod Size: 1/4, Standard Package: 100 HAYDON CORP
Eliminates offset bending conduit, No installation tools required, Provides a method of securing conduit and outlet boxes above acoustical tee bar CADDY
Eliminates offset bending conduit, No installation tools required, Provides a method of securing conduit and outlet boxes above acoustical tee bar CADDY
P0415.jpg 1 Pr. Box Supports-Grip-Lok
Locke Part #: P0415 MFG Part #: 896
APPLETON GROUP
P495.jpg 1-1/2" H-TW Con. Hang.
Locke Part #: P0503 MFG Part #: 4-WBA
MADISON ELECTRIC PRODUCTS INC
0-WBA.jpg 1-1/4" HW HANGER W/BOLT
Locke Part #: P0499 MFG Part #: 3-WBA
MADISON ELECTRIC PRODUCTS INC 784297150647
0-WBA.jpg 1-1/4" TW HANGER W/BOLT
Locke Part #: P0498 MFG Part #: 2-1/2-WBA
MADISON ELECTRIC PRODUCTS INC 784297150630
P3229.jpg 1-1/4" x 3-1/2" 90° Angle
Locke Part #: P3229 MFG Part #: 73225
HAYDON CORP
Weight: 3.40 lbs/ ft, Length: 10’, Bundle Quantity: 200 HAYDON CORP
Size: 1-5/8" x 1-5/8" x 12 Gauge, Material: Pre-Galvanized Steel, Plain Steel, Length: 10’, Wt/Ft: 1.89 Lbs., Area of Section (Sq in): .552 HAYDON CORP
Size: 1-5/8" x 1-5/8" x 12 Gauge, Material: Pre-Galvanized Steel, Plain Steel, Length: 20’, Wt/Ft: 1.89 Lbs., Area of Section (Sq in): .552 HAYDON CORP
Size: 13/16" x 1-5/8" x 14 Gauge, Material: Pre-Galvanized Steel, Plain Steel, Length: 10’, Wt/Ft: 1.03 Lbs., Area of Section (Sq in): .294 HAYDON CORP
Size: 13/16" x 1-5/8" x 14 Gauge, Material: Pre-Galvanized Steel, Plain Steel, Length: 20’, Wt/Ft: 1.03 Lbs., Area of Section (Sq in): .294 HAYDON CORP
P3236.jpg 1-5/8" x 2-1/4" 90° Angle
Locke Part #: P3236 MFG Part #: 73205
HAYDON CORP
Wire Gauge: 18 MA-LINE
Wire Gauge: 18 MA-LINE
MA-HWA02.jpg 18 Gauge Galvanized Hanging Wire, 2 Lb.
Locke Part #: M0336 MFG Part #: MA-HWG02
Wire Gauge: 18 MA-LINE
MA-HWA02.jpg 18 Gauge Galvanized Hanging Wire, 5 Lb.
Locke Part #: M0337 MFG Part #: MA-HWG05
Wire Gauge: 18 MA-LINE
26.jpg 2" BEAM CLAMP 3/8-16 MALEABLE
Locke Part #: P5338 MFG Part #: 27
MADISON ELECTRIC PRODUCTS INC 784297140273
0-WBA.jpg 2" HANGER W/BOLT
Locke Part #: P0500 MFG Part #: 5-WBA
MADISON ELECTRIC PRODUCTS INC 784297150661
J-hook, for CAT6a and higher cabling, Culus Listed and complies with NEC and TIA(SM) requirements for structured cabling systems, Cost-effective alternative to expensive cable tray, Pre-galvanized J-hooks provide smoother cable pull and greater corrosion resistance, Provides proper support of cabling CADDY
STRAIGHT_LENGTH.jpg_.jpg 2' LENGTH
Locke Part #: P4337 MFG Part #: 16M24
CADDY 622417000000
0-WBA.jpg 2-1/2" HANGER W/BOLT
Locke Part #: P0501 MFG Part #: 6-WBA
MADISON ELECTRIC PRODUCTS INC 784297150678
P5970.jpg 21" W x 5-5/8" H
Locke Part #: P5979 MFG Part #: 01899710493
100% Recycled Plastic, Load Rating: 1,000lbs (2,000 lbs for 21" wide) Raise conduit off roof surface to comply with 2011 NEC requirements. Arlington Ind
P5970.jpg 21" W x 12" H
Locke Part #: P5980 MFG Part #: 01899710491
100% Recycled Plastic, Load Rating: 1,000lbs (2,000 lbs for 21" wide) Raise conduit off roof surface to comply with 2011 NEC requirements. Arlington Ind
P4190.jpg 2102EG STRUT CLIP 1/2"
Locke Part #: P4190 MFG Part #: 72411
Per Box: 100, Fig.: 1, EMT: 1/2", Rigid: 1/2", Load lb.: 400 One piece construction. 1/4"- 3/4 thick., One size fits EMT and Rigid., Use screwdriver, wrench or nut driver., 1st - break in half. 2nd - install., Works with most struts. Has bright zinc finish., Bolt is retained to eliminate dropping of loose parts. HAYDON CORP
P4190.jpg 2103EG STRUT CLIP 3/4"
Locke Part #: P4191 MFG Part #: 72417
Per Box: 100, Fig.: 1, EMT: 3/4", Rigid: 3/4", Load lb.: 550 HAYDON CORP
P4190.jpg 2104EG STRUT CLIP 1"
Locke Part #: P4192 MFG Part #: 72421
Per Box: 100, Fig.: 1, EMT: 1", Rigid: 1", Load lb.: 550 HAYDON CORP
P4190.jpg 2107EG STRUT CLIP 2"
Locke Part #: P4195 MFG Part #: 72436
Per Box: 50, Fig.: 1, EMT: 2", Rigid: 2", Load lb.: 800 HAYDON CORP
P495.jpg 3" HW-TW Con. Hang.
Locke Part #: P0502 MFG Part #: 7-WBA
MADISON ELECTRIC PRODUCTS INC
P1885.jpg 3/4" EMT Nail Straps
Locke Part #: P1886 MFG Part #: 1605
MADISON ELECTRIC PRODUCTS INC
0-WBA.jpg 3/4" HANGER W/BOLT
Locke Part #: P0496 MFG Part #: 1-WBA
MADISON ELECTRIC PRODUCTS INC 784297150616
M822.jpg 3/8" C Type Beam Clamp
Locke Part #: M0822 MFG Part #: 78101107100
Ductile iron clamp, hardened steel cup point set screw and locknut. COOPER B-LINE
Finish: Electro-Galvanized, Material: Mild Steel, Length: 10’, Diameter: 3/8", Thread: 16, Weight/100 Feet: 30 HAYDON CORP
M3331.jpg 3/8" Malleable Iron Ceiling Flange
Locke Part #: M3331 MFG Part #: 78101112254
COOPER B-LINE
Cushion_Clamp.jpg 3/8" O.D. Cushion Clamp For Tubing
Locke Part #: P8090 MFG Part #: 74605
Finish: Zinc Trivalent Chromium, Material: Cold Rolled Steel, Weight/100 Pcs: 12, Tube OD Size: 3/8", Steel Ga: 14, Std Pkg: Bags HAYDON CORP
P3218.jpg 3/8" Retainer Strut Nut
Locke Part #: P3219 MFG Part #: 72170
Top Retainer HAYDON CORP
P4121.jpg 3/8" Slick Strut Nut
Locke Part #: P4122 MFG Part #: SLICK375
CADDY
P3226.jpg 3/8" Steel Coupler Nut
Locke Part #: P3227 MFG Part #: 74455
HAYDON CORP
P3221.jpg 3/8" x 1" Hex Head Cap Screw
Locke Part #: P3222 MFG Part #: MB381
DOTTIE, L.H.
P1992.jpg 3/8" x 6’ All Thread Rod
Locke Part #: M0539 MFG Part #: ROD386
DOTTIE, L.H.
0-WBA.jpg 3/8"-1/2" HANGER W/BOLT
Locke Part #: P0495 MFG Part #: 0-WBA
MADISON ELECTRIC PRODUCTS INC 784297150609
M3360.jpg 3/8"Steel Side Beam Bracket
Locke Part #: M3360 MFG Part #: 78101103025
Clip can be fastened to side of joist or wall to support hanger rod. COOPER B-LINE
Weight: .17 lbs, Finish: Electro-galvanized, Material: 1/4 x 1-5/8, Rod Size: 3/8, Standard Package: 100 HAYDON CORP
One fastener fits flanges 1/16" to 1/4", Installation: Hammer-on or install from the floor with the VAFT tool, Used to support 1/4 and 3/8 threaded rod from purlin beam flanges 1/16 thru 1/4 thick CADDY
Material: Galvanized Steel, Unit Qty: 25, Wt Lbs Per 100: 93, Trade Size: 3-1/2" Used to support or secure rigid/IMC conduit to mounting surface, UL File No. E-184283 MADISON ELECTRIC PRODUCTS INC
0-WBA.jpg 4" HANGER W/BOLT
Locke Part #: P2358 MFG Part #: 9-WBA
MADISON ELECTRIC PRODUCTS INC 784297150708
Weight: .78 lbs, Finish: Electro-galvanized, Material: 1/4 x 1-5/8, Hole Dimension - Diameter: 9/16 (14.29), Hole Dimension - From End: 13/16 (20.64), Hole Dimension - On Centers: 1-7/8 (47.63), Standard Package: 25 HAYDON CORP
Weight: .78 lbs, Finish: Electro-galvanized, Material: 1/4 x 1-5/8, Hole Dimension - Diameter: 9/16 (14.29), Hole Dimension - From End: 13/16 (20.64), Hole Dimension - On Centers: 1-7/8 (47.63), Standard Package: 25, Angle B°: 45 HAYDON CORP
Weight: .75 lbs, Finish: Electro-galvanized, Material: 1/4 x 1-5/8, Hole Dimension - Diameter: 9/16 (14.29), Hole Dimension - From End: 13/16 (20.64), Hole Dimension - On Centers: 1-7/8 (47.63) HAYDON CORP
P5970.jpg 5" W x 5-5/8" H
Locke Part #: P5970 MFG Part #: 01899700913
100% Recycled Plastic, Load Rating: 1,000lbs (2,000 lbs for 21" wide) Raise conduit off roof surface to comply with 2011 NEC requirements. Arlington Ind
P7126.jpg 500’ Roll of .080" Galvanized Braided Wire
Locke Part #: P7128 MFG Part #: 01899721250
Easy length adjustment with a screwdriver, without kinking or bending the wire no special tool required Arlington Ind
HAYDON CORP
Cushion_Clamp.jpg 7/8" O.D. Cushion Clamp For Tubing
Locke Part #: P8094 MFG Part #: 74625
Finish: Zinc Trivalent Chromium, Material: Cold Rolled Steel, Weight/100 Pcs: 21, Tube OD Size: 7/8", Steel Ga: 14, Std Pkg: Bags HAYDON CORP
P4190.jpg 702 2 1/2 STRUT CLIP 2-1/2"
Locke Part #: P4196 MFG Part #: 72374
Per Box: 50, Fig.: 2, EMT: 2-1/2", Rigid: 2-1/2", Load lb.: 1000 HAYDON CORP
P4190.jpg 702 3 STRUT CLIP 3"
Locke Part #: P4197 MFG Part #: 72379
Per Box: 25, Fig.: 2, EMT: 3", Rigid: 3", Load lb.: 1650 HAYDON CORP
P4190.jpg 703 11/2 STRUT CLIP 1-1/2"
Locke Part #: P4194 MFG Part #: 72431
Per Box: 50, Fig.: 1, EMT: 1-1/2", Rigid: 1-1/2", Load lb.: 800 HAYDON CORP
P4190.jpg 703 11/4 STRUT CLIP 1-1/4"
Locke Part #: P4193 MFG Part #: 72426
Per Box: 50, Fig.: 1, EMT: 1-1/4", Rigid: 1-1/4", Load lb.: 800 HAYDON CORP
P5970.jpg 9" W x 5-5/8" H
Locke Part #: P5977 MFG Part #: PSF10D
100% Recycled Plastic, Load Rating: 1,000lbs (2,000 lbs for 21" wide) Raise conduit off roof surface to comply with 2011 NEC requirements. CADDY
P5970.jpg 9" W x 12" H
Locke Part #: P5978 MFG Part #: 01899710490
100% Recycled Plastic, Load Rating: 1,000lbs (2,000 lbs for 21" wide) Raise conduit off roof surface to comply with 2011 NEC requirements. Arlington Ind
P4169.jpg AT Clip w/ Top Mounted Conduit Clip For 1/2" To 3/4"
Locke Part #: P4521 MFG Part #: SSF-TCH-C1/2 3/4
Fig: 3 Thomas & Betts
Finish: Plain, Material: Steel, Rod Size A In(mm): 1/2 (13), Rod Size B In(mm): 2-5/16 (58.7), Rod Size C In(mm): 2-3/16 (55.6), Rod Size D In(mm): 1-1/4 (31.7), Design Load with Setscrew Up Lbs(kN): 750 (3.33), Design Load with Setscrew Down Lbs(kN): 1130 (5.02), Maximum Iron Pipe Size Per UL In(mm): 8"(200), Approx Wt/100 Lbs(Kg): 51(23.1) For attachment to structural shapes requiring wider throat especially under roof with bar joist construction., This clamp may be used with the set screw in the up or down position., Cast Malleable Steel with hardened cup point set screw and jam nut., Approvals COOPER B-LINE
Weight: .80 lbs, Finish: Electro-galvanized, Material: 1/4, Standard Package: 25, Max Rec Load: 1000 lbs, Max Flange Thickness: 3/4" HAYDON CORP
P4173.jpg Beam Clamps
Locke Part #: P4173 MFG Part #: SSF-BBC
Thomas & Betts
DOTTIE, L.H.
M3160.jpg Bottom mount 1/4" Rod Hanger For Steel
Locke Part #: M3160 MFG Part #: SSM14B
DOTTIE, L.H.
M3162.jpg Bottom Mount 1/4" Rod Hanger For Wood
Locke Part #: M3162 MFG Part #: SSW14B
DOTTIE, L.H.
Finish: CADDY ARMOUR, Material: Spring Steel, Box Depth: 2-1/8", EMT Conduit Size: 1/2", 3/4" CADDY
Finish: Electrogalvanized, Material: Cast Iron, Pipe Size: 4" Max, Dimension (H x L x W): 1-3/16" x 2.06" x 1", Rod Size: 3/8", Flange Thickness: 1/8" - 3/8", Jaw Width: 0.98", Static Load 1: 250 lb, Static Load 2: 500 lb CADDY
Finish: Electrogalvanized, Material: Cast Iron, Rod Size: 3/8", Static Load 1: 750 lb CADDY
P4186.jpg Clip
Locke Part #: P4186 MFG Part #: SSF-CS1/2-H1/4
For 1/2" & 3/4" EMT conduit & MC/AC cable. Thomas & Betts
P4186.jpg Clip
Locke Part #: P4187 MFG Part #: 8P24SM
CADDY
MFG#: PS-1 Conduit bracket supports ends of conduit to flat surfaces., All holes pre drilled for mounting., 18 gauge galvanized metal. HB BRACKETS
P4336.jpg Conduit Clips
Locke Part #: P4336 MFG Part #: 16M
EMT Conduit Size: 1", Static Load (F): 25 lb CADDY
P4176.jpg Conduit Support
Locke Part #: P4176 MFG Part #: SSF-SP1
Thomas & Betts
P4329.jpg Conduit to Flange Clip, Side Mount, 1"
Locke Part #: P4338 MFG Part #: 16M24SM
Static Load (F): 25 lb CADDY
Static Load (F): 25 lb CADDY
Easy length adjustment with a screwdriver, without kinking or bending the wire no special tool required Arlington Ind
P3233.jpg Flate Plate "T" Fitting
Locke Part #: P3233 MFG Part #: 73915
HAYDON CORP
P4174.jpg For 1/2" Rigid or EMT
Locke Part #: P4174 MFG Part #: 01899722000
Arlington Ind
P4174.jpg For 3/4" Rigid or EMT
Locke Part #: P4175 MFG Part #: 01899722100
Arlington Ind
P3146.jpg For MC/AC 14-2 to 12-3
Locke Part #: P3146 MFG Part #: SSF-CB706
Thomas & Betts
P4333.jpg Hammer-on purlin clip
Locke Part #: P4333 MFG Part #: 122
CADDY
MFG#: LB-1, Weight Each (Lbs): 35 HB BRACKETS
MFG#: LB-7, Weight Each (Lbs): 35 HB BRACKETS
MFG#: LB-6, Weight Each (Lbs): 25 HB BRACKETS
MFG#: LB-2, Weight Each (Lbs): 35 HB BRACKETS
MFG#: LB-1C, Weight Each (Lbs): 35 HB BRACKETS
P4331.jpg Installation tool for AF14
Locke Part #: P4332 MFG Part #: VAFT
CADDY
W-12.jpg JACK CHAIN-PLTD 100FT / SPOOL
Locke Part #: P1915 MFG Part #: W-12
Gauge: 12, Unit: 100’, Wt. per 100’: 9 Lb., Wkg. Load: 29 Lb. PLATED Priced per 100 Ft. MADISON ELECTRIC PRODUCTS INC 784297171307
P4178.jpg Kon Clips For Large Flange
Locke Part #: P4179 MFG Part #: SSF-CK3/4
Support conduit (EMT, Rigid, ENT, and Aluminium) to rods of flanges., Can be used for: flexible metallic tubing, armored cable, portable cables, control tubes, communications cable, ect., No installation tools required., Sizing Chart, Conduit Size, 1/2" & 3/4" EMT, 1/2" & 3/4 Rigid, #8, #9, #10 & #12 Wire, K-8, 3/16" & 1/4" Rod, K-8, 1/8, " to 1/4" Flange, K-8, 3/16, ", 3/8", 7/16" & 1/2" Flange, K-8, #12, #10, #9, #8, 14-2 Cable, KX, 4-3 Cable, KX, 12-2 Cable, KX, 12-3 Cable, KX, K8 Thomas & Betts
P4178.jpg Kon Clips For Large Flange
Locke Part #: P4339 MFG Part #: KX
Support conduit (EMT, Rigid, ENT, and Aluminium) to rods of flanges., Can be used for: flexible metallic tubing, armored cable, portable cables, control tubes, communications cable, ect., No installation tools required., Sizing Chart, Conduit Size, 1/2" & 3/4" EMT, 1/2" & 3/4 Rigid, #8, #9, #10 & #12 Wire, K-8, 3/16" & 1/4" Rod, K-8, 1/8, " to 1/4" Flange, K-8, 3/16, ", 3/8", 7/16" & 1/2" Flange, K-8, #12, #10, #9, #8, 14-2 Cable, KX, 4-3 Cable, KX, 12-2 Cable, KX, 12-3 Cable, KX, K8 CADDY
Support conduit (EMT, Rigid, ENT, and Aluminium) to rods of flanges., Can be used for: flexible metallic tubing, armored cable, portable cables, control tubes, communications cable, ect., No installation tools required., Sizing Chart, Conduit Size, 1/2" & 3/4" EMT, 1/2" & 3/4 Rigid, #8, #9, #10 & #12 Wire, K-8, 3/16" & 1/4" Rod, K-8, 1/8, " to 1/4" Flange, K-8, 3/16, ", 3/8", 7/16" & 1/2" Flange, K-8, #12, #10, #9, #8, 14-2 Cable, KX, 4-3 Cable, KX, 12-2 Cable, KX, 12-3 Cable, KX, K8 CADDY
P4203.jpg M24 UNIVERSAL CLAMP 1/8"TO 1/4
Locke Part #: P4203 MFG Part #: SSF-BH1/4
Per Box: 100, Flange: 8"-1/4" 1. To suspend a box to the underside or to the front of beam flanges, 1/4" 3/4" thick., 2. Provided with a 1/4"- 20 thread impression. Thomas & Betts
P4203.jpg M24S UNIVER CLAMP 1/8" TO 1/4
Locke Part #: P4204 MFG Part #: M24S
Per Box: 100, Flange: 8"-1/4" 1. To suspend a box to the underside or to the front of beam flanges, 1/4" 3/4" thick., 2. Provided with a 1/4"- 20 thread impression. CADDY
P4334.jpg MC Support For Metal Stud
Locke Part #: P4334 MFG Part #: 449
CADDY
P4165.jpg Multifunction Clips
Locke Part #: P4165 MFG Part #: SSF-CUC
Attaches to #12 wire thru 3/8" rod, fits 1/8" to 3/8" Flanges. Thomas & Betts
P4170.jpg Multifunction Clips
Locke Part #: P4170 MFG Part #: 812MF
1/2" To 3/4" Conduit to metal stud. CADDY
P4335.jpg NM/MC Support for Wood/Metal stud
Locke Part #: P4335 MFG Part #: FXC20
CADDY
Weight: 4.00 lbs, Finish: Electro-galvanized, Material: 1/4, Hole Dimension - Diameter: 9/16 (14.29), Hole Dimension - From End: 13/16 (20.64), Standard Package: 10 HAYDON CORP
T1760.jpg Sammy-Screw Driver
Locke Part #: T1760 MFG Part #: 2440102
WAL-RICH CORP
T1760.jpg Sammy-Screw Side Winder Driver
Locke Part #: T1761 MFG Part #: 2440104 8114910
WAL-RICH CORP
P7126.jpg Screw Type Wire Grabber
Locke Part #: P7127 MFG Part #: 01899701590
Easy length adjustment with a screwdriver, without kinking or bending the wire no special tool required Arlington Ind
M3161.jpg Side Mount 1/4" Rod Hanger For Steel
Locke Part #: M3161 MFG Part #: SSM14S
DOTTIE, L.H.
Finish: Electrogalvanized, Material: Steel, Rod Size: 3/8" CADDY
P4190.jpg SK645I STRUT CLIP 4"
Locke Part #: P4199 MFG Part #: 72389
Per Box: 25, Fig.: 2, EMT: 4", Rigid: 4", Load lb.: 1650 HAYDON CORP
Eliminates offset bending conduit, No installation tools required, Provides a method of securing conduit and outlet boxes above acoustical tee bar CADDY
Will pivot 360, Requires only a hammer and pliers to install., Available for 3/8" EMT, rigid, and aluminium Conduit CADDY
Will pivot 360, Requires only a hammer and pliers to install., Available for 3/8" EMT, rigid, and aluminium Conduit CADDY
P4206.jpg Support
Locke Part #: P4206 MFG Part #: CS812
For 1/2" & 3/4" EMT conduit & MC/AC cable. CADDY
P4164.jpg T-Bar Twist Clips
Locke Part #: P4164 MFG Part #: 4G16
Supports electrical fixtures from acoustical tee bar 9/16" or ,15/16 wide. CADDY
Weight: 56/C, Finish: Electro-Galvanized, Material: Hot Rolled Steel , Cold Rolled Steel, Width: 1-5/8", Thickness: 1/4", Holes Dia: 9/16", Holes Spacing: 1-7/8" On Center and 13/16" From End HAYDON CORP
Weight: 37/C, Finish: Electro-Galvanized, Material: Hot Rolled Steel, Cold Rolled Steel, Width: 1-5/8", Thickness: 1/4", Holes Dia: 9/16", Holes Spacing: 1-7/8" On Center and 13/16" From End HAYDON CORP
Easy length adjustment with a screwdriver, without kinking or bending the wire no special tool required Arlington Ind
P4331.jpg Z Purlin clip
Locke Part #: P4331 MFG Part #: AF14
CADDY
P5512.jpg Z Spurlin Clip
Locke Part #: P5512 MFG Part #: SSF-BZ2-C1/2 3/4
Thomas & Betts
Slide Hanger mounts to "T" Bar; gives minimum of, 1-1/2" spacing off ceiling Hubbell Lighting