Loading ...

Loading ...

Search in: Duct Work Category

Product Image Not Available "8 PVC AIR DUCT COUPLING C800P
Locke Part #: R0611 MFG Part #: C800P
GENERAL PLASTICS
Product Image Not Available #85 6 X 12 X 6 INS. STRAIGHT CLG. BOOT
Locke Part #: L3001 MFG Part #: 856126
SOUTHWARK METAL MFG CO
Product Image Not Available #85 6 X 12 X 8 INS. STRAIGHT CLG. BOOT
Locke Part #: L3002 MFG Part #: 856128
SOUTHWARK METAL MFG CO
L510.jpg .475" For all 1/2", 2lb. Liner Box of 1000
Locke Part #: L0510 MFG Part #: LF CMF050
Description Ext.: 1000 ct PINCHER IMPACT F The premium quality impact fastener Thru insulation impact fasteners. CAIN MFG. CO INC
L510.jpg .63" dia for all 1", 12lb. Liner Box of 1000
Locke Part #: L0529 MFG Part #: LF CMF 100
Description Ext.: PINCHER IMPACT FSTNR 1" The premium quality impact fastener Thru insulation impact fasteners. CAIN MFG. CO INC
Product Image Not Available 036 20" X 25' FOIL FLEX R-6
Locke Part #: L1256 MFG Part #: 036 20"
Atco Rubber Prod
Width (in): 48, Length (ft): 100, Thickness (in): 1-1/2, K-Value (Btu•in / h•ft²•°F): 0.29, K-Value (W / m•°C): 0.042, R-Value (h•ft²•°F / Btu): 5.2, R-Value (m²•°C / W): 0.92, Model Building Codes: ICC, Fire Safety Standards: NFPA 90A, NFPA 90B, Facing: FSK/PSK, Installed R-value (h•ft²•°F / btu): 4.2, Installed R-value (m²•°C / W): 0.74, Installed K-value (Btu•in / h•ft² •°F): 0.27, Installed K-value (W / m•°C): 0.039, Product Type: 75 (0.75lbs./cu. ft.), Water Vapor Sorption: ASTM C1104 < 5% by weight Lower Energy Usage: Duct wrap products provide thermal efficiency that reduces unwanted heat loss or gain from equipment and ductwork. This means a likely savings of energy and improved system performance., Condensation Control: When properly installed in the correct thickness, duct wrap virtually eliminates condensation problems on cold duct surfaces., SoftTouch: Our duct wrap products are now made with SoftTouch for a softer, less itchy product., Applicable Standards:, Material Standards:, ASTM C1290, ASTM C553, Type I; Type 75 Duct Wrap, Type II; Type 100 & 150 Duct Wrap, Type III; Type 150 Duct Wrap, CAN/CGSB-51.11-92, ASTM C1136, FSK and white PSK, Type II, Gray PSK, Type IV, Fire Resistance:, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102-M88, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Non-Combustible: ASTM E136, Meets tests requirements, Physical/Chemical Properties:, Operating Limits:, Temperature: ASTM C411, Faced: Max. 250 F (121 C), Unfaced: Max. 450 F (232 C), Water Vapor Transmission, Facing: ASTM E96, Dessicant Method, FSK and white PSK: Max. 0.02 perms - 1.15 x 10-9 g/, Pa-s-m2, Gray PSK: Max. 0.09 perms - 5.17 x 10-9 g/, Pa-s-m2, Corrosiveness: ASTM C665, Pass test requirements, Fungi Resistance: ASTM C1338, Pass test requirements, Odor Emission: ASTM C1304, Pass test requirements CERTAINTEED INSULATION 740377932619
Width (in): 48, Length (ft): 75, Thickness (in): 2, K-Value (Btu•in / h•ft²•°F): 0.29, K-Value (W / m•°C): 0.042, R-Value (h•ft²•°F / Btu): 6.9, R-Value (m²•°C / W): 1.22, Model Building Codes: ICC, Fire Safety Standards: NFPA 90A, NFPA 90B, Facing: FSK/PSK, Installed R-value (h•ft²•°F / btu): 5.7, Installed R-value (m²•°C / W): 1.00, Installed K-value (Btu•in / h•ft² •°F): 0.26, Installed K-value (W / m•°C): 0.038, Product Type: 75 (0.75lbs./cu. ft.), Water Vapor Sorption: ASTM C1104 < 5% by weight Features:, Lower Energy Usage: Duct wrap products provide thermal efficiency that reduces unwanted heat loss or gain from equipment and ductwork. This means a likely savings of energy and improved system performance., Condensation Control: When properly installed in the correct thickness, duct wrap virtually eliminates condensation problems on cold duct surfaces., SoftTouch: Our duct wrap products are now made with SoftTouch for a softer, less itchy product., Applicable Standards:, Material Standards:, ASTM C1290, ASTM C553, Type I; Type 75 Duct Wrap, Type II; Type 100 & 150 Duct Wrap, Type III; Type 150 Duct Wrap, CAN/CGSB-51.11-92, ASTM C1136, FSK and white PSK, Type II, Gray PSK, Type IV, Fire Resistance:, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102-M88, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Non-Combustible: ASTM E136, Meets tests requirements, Physical/Chemical Properties:, Operating Limits:, Temperature: ASTM C411, Faced: Max. 250 F (121 C), Unfaced: Max. 450 F (232 C), Water Vapor Transmission, Facing: ASTM E96, Dessicant Method, FSK and white PSK: Max. 0.02 perms - 1.15 x 10-9 g/Pa-s-m2, Gray PSK: Max. 0.09 perms - 5.17 x 10-9 g/Pa-s-m2, Corrosiveness: ASTM C665, Passes test requirements, Fungi Resistance: ASTM C1338, Passes test requirements, Odor Emission: ASTM C1304, Pass test requirements CERTAINTEED INSULATION 740377932626
Width (in): 48, Length (ft): 50, Thickness (in): 3, K-Value (Btu•in / h•ft²•°F): 0.31, K-Value (W / m•°C): 0.045, R-Value (h•ft²•°F / Btu): 9.6, R-Value (m²•°C / W): 1.69, Model Building Codes: ICC, Fire Safety Standards: NFPA 90A, NFPA 90B, Facing: FSK/PSK, Installed R-value (h•ft²•°F / btu): 8.3, Installed R-value (m²•°C / W): 1.41, Installed K-value (Btu•in / h•ft² •°F): 0.28, Installed K-value (W / m•°C): 0.041, Product Type: 75 (0.75lbs./cu. ft.), Water Vapor Sorption: ASTM C1104 < 5% by weight Lower Energy Usage: Duct wrap products provide thermal efficiency that reduces unwanted heat loss or gain from equipment and ductwork. This means a likely savings of energy and improved system performance., Condensation Control: When properly installed in the correct thickness, duct wrap virtually eliminates condensation problems on cold duct surfaces., SoftTouch: Our duct wrap products are now made with SoftTouch for a softer, less itchy product., Applicable Standards:, Material Standards:, ASTM C1290, ASTM C553, Type I; Type 75 Duct Wrap, Type II; Type 100 & 150 Duct Wrap, Type III; Type 150 Duct Wrap, CAN/CGSB-51.11-92, ASTM C1136, FSK and white PSK, Type II, Gray PSK, Type IV, Fire Resistance:, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102-M88, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Non-Combustible: ASTM E136, Meets tests requirements, Physical/Chemical Properties:, Operating Limits:, Temperature: ASTM C411, Faced: Max. 250 F (121 C), Unfaced: Max. 450 F (232 C), Water Vapor Transmission, Facing: ASTM E96, Dessicant Method, FSK and white PSK: Max. 0.02 perms - 1.15 x 10-9 g/, Pa-s-m2, Gray PSK: Max. 0.09 perms - 5.17 x 10-9 g/, Pa-s-m2, Corrosiveness: ASTM C665, Pass test requirements, Fungi Resistance: ASTM C1338, Pass test requirements, Odor Emission: ASTM C1304, Pass test requirements CERTAINTEED INSULATION 740377932657
L541.jpg 1" Pin Size 1" H.D. 3 Lb. Liner Box of 1000
Locke Part #: L0543 MFG Part #: LF CWF 150
Description Ext.: POINTER WELD FSTNR 1" Thru Insulation weld fastener. Sharp Rolled Point CAIN MFG. CO INC
L541.jpg 1" Pin Size 1" H.D. 3 Lb. Liner Box of 5000
Locke Part #: L0542 MFG Part #: LF-CWF-150B
Description Ext.: POINTER WELD FASTNER 1" Thru Insulation weld fastener. Sharp Rolled Point CAIN MFG. CO INC
Width (in): 48, Length (ft): 120, Thickness (in): 1, K-Value (Btu•in / h•ft²•°F): 0.23, K-Value (W / m•°C): 0.33, R-Value (h•ft²•°F / Btu): 4.3, R-Value (m²•°C / W): 0.76, Model Building Codes: ICC, WA State IAQ Standard, Water Vapor Sorption: ASTM C1104 < 2% by weight, Corrosiveness: UL 181 and ASTM C665 Pass, C-Value (Btu / h•ft²•°F): 0.23, C-Value (W / m²•°C): 1.31, NRC: 0.75, Air Leakage Class (SMACNA): Class 6 Acoustically Excellent, Keeps air rush and equipment noise in a home to a minimum., Helps reduce noise generated by cross talk, system expansion and air movement., Thermally Efficient, Improves energy efficiency and saves homeowners money by reducing heat loss or gain., Duct board system with properly sealed joints virtually eliminates leakage common with sheet metal ducts., Reduces or eliminates call-backs and results in satisfied homeowners., Moisture Resistant, Provides superior moisture resistance compared to other duct boards., Reduces homeowner concern about problems from condensation, mold and bacterial growth., Cleanable, Easily cleaned thanks to abrasion-resistant airstream surface., Surface is treated with an EPA-registered antimicrobial agent to reduce the potential for microbial growth., Cost Effective, Resists damage during fabrication, installation, and cleaning., Generally costs less than sheet metal ductwork. Costs less than bare sheet metal systems., Makes HVAC equipment downsizing possible. Delivers maximum heating and cooling comfort., Provides exceptional acoustical performance. Improves indoor air quality., Helps eliminate condensation problems. Provides energy savings for homeowner., Applicable Standards:, Material Standards: UL 181, Class 1 Rigid Air Duct, Fire Resistance:, Surface Burning Characteristics: UL 723 and ASTM E84, Max. Flame Spread Index: 25, Max. Smoke Developed Index: 50, Limited Combustible: NFPA 259, < 3,500 BTU/lb., Fire Safety Standards : NFPA 90A, NFPA 90B, Physical/Chemical Properties:, Operating Limits:, Temperature (ASTM C411): Max. 250, F (121, C), Air Velocity (UL 181): Max. 5,000 fpm (25.4 m/s), Static Pressure (UL 181): 2" wc (498 Pa), Ambient Temperature: 150 F (66 C), Bacteria Resistance: ASTM G22, No Growth, Fungi Resistance:, UL 181, ASTM C1338 & ASTM G21, Pass; No Growth, Water Repellency Rating:, > 4 (INDA IST 80.6-92), Water Vapor Transmission (Facing):, ASTM E96, Desicant Method Max. 0.02 perms (1.15 x 10-9 g/Pa-s-m2) CERTAINTEED INSULATION
L541.jpg 1/2" Pin Size 1/2" 2 Lb. Liner Box of 5000
Locke Part #: L0541 MFG Part #: LF-CWF-50B
Description Ext.: POINTER WELD FSTNR Thru Insulation weld fastener. Sharp Rolled Point CAIN MFG. CO INC
L514.jpg 1-1/4" Duct Board Straight Clear Pins
Locke Part #: L0514 MFG Part #: LFWP114
Description Ext.: 1 1/4" DUCT BD STR CLR CAIN MFG. CO INC
L1331.jpg 1-1/4" Self AdhesiveHanger
Locke Part #: L1332 MFG Part #: LF-SP-1250
Description Ext.: 1 1/4" SELF ADHESIVE CAIN MFG. CO INC
Description Ext.: 110660 1 1/2X1/2X60 RET SOUTHWARK METAL MFG CO
Description Ext.: 1 1/4" DUCT BD STR CLR CAIN MFG. CO INC
90 Elbow.jpg 10" 30GA ELBOW
Locke Part #: L1632 MFG Part #: 901030
Type: Metal SOUTHWARK METAL MFG CO 99273524641
Material: G-90 Galvanized, Diameter (in): 10 Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
Material: G-90 Galvanized, Gauge: 28, Diameter (in): 10 Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
L120-L132Cody.jpg 10" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7027 MFG Part #: 1252610
Material: Galvanized Metal, Gauge: 26, Size (in): 10, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
L120-L132Cody.jpg 10" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7015 MFG Part #: 1252810
Material: Galvanized Metal, Gauge: 28, Size (in): 10, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
L120-L132Cody.jpg 10" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0127 MFG Part #: 12510
Material: Galvanized Metal, Gauge: 30, Size (in): 10, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
Description Ext.: 10"26GA AT/SD STR COL AIR-TITE INC
Description Ext.: 10"ATD 26GA STRT COLLAR AIR-TITE INC
Description Ext.: 10"ATT 26GA STRT COLLAR AIR-TITE INC
Gauge: 28, Size (in): 10 Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
L1375.jpg 10" Damper with Hardware, 26 Gauge
Locke Part #: L1375 MFG Part #: 10" DAMPER W/HW
Size: 10", Gauge: 26 plenum, secure with sheet metal screws. This will, assure air tight seal & give the needed support for the, duct work. On the duct board longer screws & back, plates should be used to strengthen duct board., Dampers Only Complete With All Hardware Assembled AIR-TITE INC
Cody661.jpg 10" Ductboard Triangle
Locke Part #: L6101 MFG Part #: 10" DUCT BRD TI
Size (in): 10 CODY CO INC
Cody320.jpg 10" Inline Adjustable Damper
Locke Part #: L7037 MFG Part #: 32010
Material: Galvanized Metal, Diameter (in): 10 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request CODY CO INC
569.jpg 10" Multifit 45° PVC Wye
Locke Part #: R0570 MFG Part #: B1086
Description Ext.: 10" MULTI FIT AIR DUCT 8" Fitting Fits:, 6" x 4" x 4", 6" x 6" x 4", 6" x 6" x 6", 8" x 6" x 4",, 8" x 6" x 6", 8" x 8" x 4", 10" Fitting Fits:, 8" x 6" x 6", 8" x 8" x 6", 8" x 8" x 8", 10" x 6" x 6", 10" x 8" x 6", 10" x 8" x 8", 10" x 10" x 6", 10" x 10" x 8", One Fits Most Popular Sizes. Stock Only One Wye. Cut To Fit GENERAL PLASTICS
r862.jpg 10" PVC Air Duct 45° Elbow
Locke Part #: R0450 MFG Part #: EB145
Description Ext.: 10" PVC AIR DUCT 45 ELL GENERAL PLASTICS
r858.jpg 10" PVC Air Duct 90° Elbow
Locke Part #: R0442 MFG Part #: EB190
Description Ext.: 10" PVC AIR DUCT 90 ELL GENERAL PLASTICS
r565.jpg 10" PVC Air Duct Coupling
Locke Part #: R0612 MFG Part #: C100P
Description Ext.: 10" PVC AIR DUCT COUPLIN GENERAL PLASTICS
r558.jpg 10" PVC Air Duct Start Collar
Locke Part #: R0561 MFG Part #: SC10P
Description Ext.: 10" PVC AIR DUCT START GENERAL PLASTICS
r544.jpg 10" PVC End Cap
Locke Part #: R0546 MFG Part #: EC10P
Description Ext.: 10" PVC AIR DUCT END CAP GENERAL PLASTICS
L1509.jpg 10" Rectangular "S" Lock
Locke Part #: L1509 MFG Part #: 6S10
Description Ext.: 110410 10 RECT S-LOCK SOUTHWARK METAL MFG CO
Description Ext.: 10" CATTR 26GA STRT COLL AIR-TITE INC
Size (in): 10 CODY CO INC
Cody500.jpg 10" Round Sheet Metal Starting Collar
Locke Part #: L0279 MFG Part #: 50010
Material: Galvanized Metal, Diameter (in): 10 Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
l7240Cody.jpg 10" Spiral Pipe Coupling
Locke Part #: L7242 MFG Part #: 11810
Diameter (in): 10 CODY CO INC
L7230Cody.jpg 10" Spiral Pipe End Cap
Locke Part #: L7232 MFG Part #: 119S10
Diameter (in): 10 CODY CO INC
Cody550.jpg 10" Starting Collar For Ductboard
Locke Part #: L0044 MFG Part #: 55010
Diameter (in): 10 CODY CO INC
Size: 10" x 10" - 8", Gauge: 28 GA, Insulation Type: R8 CODY CO INC
Cody825.jpg 10" x 10" x 10" Furnace Tee
Locke Part #: L1207 MFG Part #: 825101010
Material: Galvanized Metal, Size (in): 10x10x10 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C CODY CO INC
L213-L240Cody.jpg 10" x 10" x 10" Wye
Locke Part #: L0236 MFG Part #: 800101010
Material: Galvanized Metal, Size (in): 10 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 10" x 10" x 6" Wye
Locke Part #: L0233 MFG Part #: 80010106
Material: Galvanized Metal, Size (in): 10 x 10 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Cody645.jpg 10" x 10" x 7" Insulated Register Boot
Locke Part #: L0177 MFG Part #: 64510107
Size (in): 10 x 10 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Material: Galvanized Metal, Gauge: 30, Size (in): 10 x 10 x 7 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 10 x 7 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 10 x 7 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Gauge: 28, Size (in): 10 x 10 x 7 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Cody648.jpg 10" x 10" x 8" Hi Side Insulated Boot
Locke Part #: L7048 MFG Part #: 64810108
Size (in): 10 x 10 x 8 CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 10 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Cody645.jpg 10" x 10" x 8" Insulated Register Boot
Locke Part #: L0159 MFG Part #: 64510108
Size (in): 10 x 10 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Material: Galvanized Metal, Gauge: 30, Size (in): 10 x 10 x 8 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 10 x 8 Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Material: Galvanized Steel, Size (in): 10 x 10 x 8 30 GA Galvanized Steel, 1 Flange for Rails CODY CO INC
L213-L240Cody.jpg 10" x 10" x 8" Wye
Locke Part #: L0235 MFG Part #: 80010108
Material: Galvanized Metal, Size (in): 10 x 10 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Gauge: 28, Size (in): 10 x 10 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
r59.jpg 10" x 10’ PVC Air Duct Pipe
Locke Part #: R0062 MFG Part #: 10 X 10 50 PSI
Description Ext.: 10 X 10 PVC AIR DUCT Belled at One End KROY IND INC
Material: G-90 Galvanized, Gauge: 26, Diameter (in): 10, Length (ft): 10, Est Wt/Ft: 2.66 lb. Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
Size (in): 10 x 12 Increase type with flange & damper CODY CO INC
Product Image Not Available 10" X 25' UNINSUL FLEX DUCT 50
Locke Part #: L1286 MFG Part #: 10" 050
Atco Rubber Prod
L1970.jpg 10" x 25’ Foil Flex Duct R-6 225’
Locke Part #: L1976 MFG Part #: 036 10" R6 BAG
Description Ext.: 036 10" X 25’ FOIL FLEX Atco Rubber Prod
L1937.jpg 10" x 25’ Foil Flex R8
Locke Part #: L1943 MFG Part #: 031 10" X 25'
Atco Rubber Prod
Cody251.jpg 10" x 4" x 4" Concrete Box
Locke Part #: L0259 MFG Part #: 2514104
Size (in): 10 x 4 x 4 CODY CO INC
Size (in): 10 x 4 x 5 CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 4 x 5 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Size (in): 10 x 4 x 5 CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 4 x 5, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Size (in): 10 x 4 x 6 CODY CO INC
Cody251.jpg 10" x 4" x 6" Concrete Box
Locke Part #: L0265 MFG Part #: 2514106
Size (in): 10 x 4 x 6 CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 4 x 6 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 4 x 6 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Size (in): 10 x 4 x 6 CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Cody104.jpg 10" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7006 MFG Part #: 1042610
Gauge: 26, Size (in): 10, Length (ft): 4 CODY CO INC
L1961.jpg 10" x 5’ Foil Sleeve R6
Locke Part #: L1260 MFG Part #: 010 R-6 10"
Size: 10"x5’ r6, Description Ext.: 010 10" X 5’ FOIL SLEEVE UPC #010 Reinforced sleeves for insulating standard sheet metal pipes., Thick fiberglass insulation for excellent thermal efficiency, Reinforced metalized vapor barrier jacket. Atco Rubber Prod
L1961.jpg 10" x 5’ Foil Sleeve R8
Locke Part #: L1967 MFG Part #: 010 R8 10" X 5'
Size: 10"x5’ r8, Description Ext.: 010 9" X 5’ R8 SLEEVE UPC #010 Reinforced sleeves for insulating standard sheet metal pipes., Thick fiberglass insulation for excellent thermal efficiency, Reinforced metalized vapor barrier jacket. Atco Rubber Prod
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 6 Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 6 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall CODY CO INC
Size (in): 10 x 6 x 6 CODY CO INC
L213-L240Cody.jpg 10" x 6" x 6" Wye
Locke Part #: L0240 MFG Part #: 8001066
Material: Galvanized Metal, Size (in): 10 x 6 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Size (in): 10 x 6 x 7 CODY CO INC
r467.jpg 10" x 8" PVC Air Duct Reducer
Locke Part #: R0469 MFG Part #: RC10P
Description Ext.: 10 X 8 PVC AIR DUCT GENERAL PLASTICS
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 8 Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
L7222-L7228Cody.jpg 10" x 8" Spiral Pipe Reducer
Locke Part #: L7221 MFG Part #: 120108
Diameter (in): 10 x 8 Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
Cody801.jpg 10" x 8" x 6" Sealed Wye
Locke Part #: L7092 MFG Part #: 8011086
Material: Galvanized Metal, Size (in): 10 x 8 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 10" x 8" x 6" Wye
Locke Part #: L0238 MFG Part #: 8001086
Material: Galvanized Metal, Size (in): 10 x 8 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 8 x 7 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
L213-L240Cody.jpg 10" x 8" x 7" Wye
Locke Part #: L0232 MFG Part #: 8001087
Material: Galvanized Metal, Size (in): 10 x 8 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Material: Galvanized Metal, Size (in): 10 x 8 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Size (in): 10 x 8 x 8 CODY CO INC
Cody801.jpg 10" x 8" x 8" Sealed Wye
Locke Part #: L7090 MFG Part #: 8011088
Material: Galvanized Metal, Size (in): 10 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 10" x 8" x 8" Wye
Locke Part #: L0237 MFG Part #: 8001088
Material: Galvanized Metal, Size (in): 10 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 10 x 9 Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
L213-L240Cody.jpg 10" x 9" x 5" Wye
Locke Part #: L0234 MFG Part #: 8001095
Material: Galvanized Metal, Size (in): 10 x 9 x 5 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 10" x 9" x 6" Wye
Locke Part #: L0241 MFG Part #: 8001096
Material: Galvanized Metal, Size (in): 10 x 9 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 10" x 9" x 7" Wye
Locke Part #: L0239 MFG Part #: 8001097
Material: Galvanized Metal, Size (in): 10 x 9 x 7 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Cody035.jpg 10’ "S" Cleat for Rectangular Duct
Locke Part #: L0073 MFG Part #: 03010
Length (ft): 10 CODY CO INC
Cody035.jpg 10’ Drive Cleat for Rectangular Duct
Locke Part #: L0074 MFG Part #: 0352610
Length (ft): 10 CODY CO INC
Size (in): 10 X10 x 7 CODY CO INC
Size (in): 10 X10 x 8 CODY CO INC
Product Image Not Available 1008361426 14" X 3' PIPE
Locke Part #: L1856 MFG Part #: SL361426
SOUTHWARK METAL MFG CO
Free Flow Tee.jpg 1060 10X10X10 26GA TEE
Locke Part #: L1697 MFG Part #: 10602610
Type: Metal SOUTHWARK METAL MFG CO 99273569871
Free Flow Tee.jpg 1060 12X12X12 26GA TEE
Locke Part #: L1698 MFG Part #: 10602612
Type: Metal SOUTHWARK METAL MFG CO 99273569888
Free Flow Tee.jpg 1060 3X3X3 30GA TEE
Locke Part #: L1675 MFG Part #: 10603
Type: Metal SOUTHWARK METAL MFG CO 99273544489
Free Flow Tee.jpg 1060 4X4X4 30GA TEE
Locke Part #: L1676 MFG Part #: 10604
Type: Metal SOUTHWARK METAL MFG CO 99273544496
Free Flow Tee.jpg 1060 5X5X5 30GA TEE
Locke Part #: L1677 MFG Part #: 10605
Type: Metal SOUTHWARK METAL MFG CO 99273544502
Free Flow Tee.jpg 1060 6X6X6 30GA TEE
Locke Part #: L1678 MFG Part #: 10606
Type: Metal SOUTHWARK METAL MFG CO 99273544519
Free Flow Tee.jpg 1060 7X7X7 30GA TEE
Locke Part #: L1679 MFG Part #: 10607
Type: Metal SOUTHWARK METAL MFG CO 99273544526
Free Flow Tee.jpg 1060 8X8X8 30GA TEE
Locke Part #: L1680 MFG Part #: 10608
Type: Metal SOUTHWARK METAL MFG CO 99273544533
Round Snaplock Joint.jpg 10FT JT 6" 30GA S/L PIPE
Locke Part #: L1623 MFG Part #: SL120630
Type: Metal SOUTHWARK METAL MFG CO 99273557694
90 Elbow.jpg 12" 28GA ELBOW
Locke Part #: L1633 MFG Part #: 901228
Type: Metal SOUTHWARK METAL MFG CO 99273543765
Material: G-90 Galvanized, Diameter (in): 12 Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
Material: G-90 Galvanized, Gauge: 26, Diameter (in): 12 Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
L120-L132Cody.jpg 12" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7028 MFG Part #: 1252612
Material: Galvanized Metal, Gauge: 26, Size (in): 12, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
L120-L132Cody.jpg 12" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0128 MFG Part #: 12512
Material: Galvanized Metal, Gauge: 30, Size (in): 12, Throat Dimension: 4" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
Description Ext.: 12"26GA AT/SD STR COL AIR-TITE INC
Description Ext.: 12"ATD 26GA STRT COLLAR AIR-TITE INC
Description Ext.: 12"ATT 26GA STRT COLLAR AIR-TITE INC
Gauge: 28, Size (in): 12 Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
L1375.jpg 12" Damper with Hardware, 26 Gauge
Locke Part #: L1376 MFG Part #: 12" DAMPER W/HW
Size: 12", Gauge: 26 plenum, secure with sheet metal screws. This will, assure air tight seal & give the needed support for the, duct work. On the duct board longer screws & back, plates should be used to strengthen duct board., Dampers Only Complete With All Hardware Assembled AIR-TITE INC
Cody661.jpg 12" Ductboard Triangle
Locke Part #: L6102 MFG Part #: 12" DUCT BD TRI
Size (in): 12 CODY CO INC
Cody320.jpg 12" Inline Adjustable Damper
Locke Part #: L7038 MFG Part #: 32012
Material: Galvanized Metal, Diameter (in): 12 Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request CODY CO INC
r862.jpg 12" PVC Air Duct 45° Elbow
Locke Part #: R0451 MFG Part #: L125P
Description Ext.: 12" PVC AIR DUCT 45 ELL GENERAL PLASTICS
R443.jpg 12" PVC Air Duct 90° Elbow
Locke Part #: R0443 MFG Part #: L129P
Description Ext.: 12" PVC AIR DUCT 90 ELL GENERAL PLASTICS
r565.jpg 12" PVC Air Duct Coupling
Locke Part #: R0613 MFG Part #: C120P
Description Ext.: 12" PVC AIR DUCT COUPLIN GENERAL PLASTICS
r558.jpg 12" PVC Air Duct Start Collar
Locke Part #: R0562 MFG Part #: SC12P
Description Ext.: 12" PVC AIR DUCT START GENERAL PLASTICS
r544.jpg 12" PVC End Cap
Locke Part #: R0547 MFG Part #: EC12P
Description Ext.: 12" PVC AIR DUCT END CAP GENERAL PLASTICS
L1509.jpg 12" Rectangular "S" Lock
Locke Part #: L1510 MFG Part #: 6S12
Description Ext.: 110412 12 RECT S-LOCK SOUTHWARK METAL MFG CO
Description Ext.: 12" CATTR 26GA STRT COLL AIR-TITE INC
Cody500.jpg 12" Round Sheet Metal Starting Collar
Locke Part #: L0280 MFG Part #: 50012
Material: Galvanized Metal, Diameter (in): 12 Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
l7240Cody.jpg 12" Spiral Pipe Coupling
Locke Part #: L7243 MFG Part #: 11812
Diameter (in): 12 CODY CO INC
L7230Cody.jpg 12" Spiral Pipe End Cap
Locke Part #: L7233 MFG Part #: 119S12
Diameter (in): 12 CODY CO INC
Cody076.jpg 12" Spiral Pipe Hanger
Locke Part #: L7257 MFG Part #: 07612
Diameter (in): 12 CODY CO INC
Cody550.jpg 12" Starting Collar For Ductboard
Locke Part #: L0045 MFG Part #: 55012
Diameter (in): 12 CODY CO INC
r467.jpg 12" x 10" PVC Air Duct Reducer
Locke Part #: R0542 MFG Part #: RC12P
Description Ext.: 12 X 10 PVC AIR DUCT GENERAL PLASTICS
Material: Galvanized Metal, Gauge: 28, Size (in): 12 x 10 Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
L7222-L7228Cody.jpg 12" x 10" Spiral Pipe Reducer
Locke Part #: L7222 MFG Part #: 120108
Diameter (in): 12 x 10 Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
r460.jpg 12" x 10" x 10" PVC Air Duct Wye
Locke Part #: R0539 MFG Part #: Y100P
Description Ext.: 12 X 10 X 10 PVC AIR GENERAL PLASTICS
Cody801.jpg 12" x 10" x 10" Sealed Wye
Locke Part #: L7091 MFG Part #: 801121010
Material: Galvanized Metal, Size (in): 12 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 12" x 10" x 10" Wye
Locke Part #: L0244 MFG Part #: 800121010
Material: Galvanized Metal, Size (in): 12 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 12" x 10" x 6" Wye
Locke Part #: L0247 MFG Part #: 80012106
Material: Galvanized Metal, Size (in): 12 x 10 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
r460.jpg 12" x 10" x 8" PVC Air Duct Wye
Locke Part #: R0540 MFG Part #: Y118P
Description Ext.: 12 X 10 X 8 PVC AIR DUCT GENERAL PLASTICS
Cody801.jpg 12" x 10" x 8" Sealed Wye
Locke Part #: L7094 MFG Part #: 80112108
Material: Galvanized Metal, Size (in): 12 x 10 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 12" x 10" x 8" Wye
Locke Part #: L0246 MFG Part #: 80012108
Material: Galvanized Metal, Size (in): 12 x 10 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
r59.jpg 12" x 10’ PVC Air Duct Pipe
Locke Part #: R0063 MFG Part #: 12 X 10 50 PSI
Description Ext.: 12 X 10 PVC AIR DUCT Belled at One End KROY IND INC
Material: G-90 Galvanized, Gauge: 26, Diameter (in): 12, Length (ft): 10, Est Wt/Ft: 3.19 lb. Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
Size: 12" x 12" - 10", Gauge: 28 GA, Insulation Type: R8 CODY CO INC
Cody645.jpg 12" x 12" x 10" Insulated Register Boot
Locke Part #: L0182 MFG Part #: 645121210
Size (in): 12 x 12 x 10 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 12 x 10 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Gauge: 28, Size (in): 12 x 12 x 10 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Cody825.jpg 12" x 12" x 12" Furnace Tee
Locke Part #: L1208 MFG Part #: 825121212
Material: Galvanized Metal, Size (in): 12x12x12 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C CODY CO INC
L213-L240Cody.jpg 12" x 12" x 12" Wye
Locke Part #: L0243 MFG Part #: 800121212
Material: Galvanized Metal, Size (in): 12 x 12 x 12 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 12" x 12" x 6" Wye
Locke Part #: L0242 MFG Part #: 80012126
Material: Galvanized Metal, Size (in): 12 x 12 x 6 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 12 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
L213-L240Cody.jpg 12" x 12" x 8" Wye
Locke Part #: L0248 MFG Part #: 80012128
Material: Galvanized Metal, Size (in): 12 x 12 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
R0464.jpg 12" x 16" x 48" Elbow
Locke Part #: R0464 MFG Part #: P1268
Description Ext.: 12X16X48 PVC PLENM 8"EXT GENERAL PLASTICS
R0464.jpg 12" x 18" x 120" Elbow
Locke Part #: R0447 MFG Part #: P1281
Description Ext.: 12X18X120 PVC PLENUM GENERAL PLASTICS
R0464.jpg 12" x 18" x 60" Elbow
Locke Part #: R0462 MFG Part #: P1280
Description Ext.: 12X18X60 PVC PLENM 8"EXT GENERAL PLASTICS
R0464.jpg 12" x 18" x 72" Elbow
Locke Part #: R0463 MFG Part #: P1282
Description Ext.: 12X18X72 PVC PLENM 8"EXT GENERAL PLASTICS
R0464.jpg 12" x 18" x 96" Elbow
Locke Part #: R0576 MFG Part #: P1286
Description Ext.: 12X18X96 PVC PLEN 8" EXT GENERAL PLASTICS
Size (in): 12 X 2-1/4 X 6 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 2-1/4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Product Image Not Available 12" X 25' UNINSUL FLEX DUCT 50
Locke Part #: L1288 MFG Part #: 12" 050
Atco Rubber Prod
L1970.jpg 12" x 25’ Foil Flex Duct R-6 150’
Locke Part #: L1977 MFG Part #: 036 12" R6 BAG
Description Ext.: 036 12" X 25’ FOIL FLEX Atco Rubber Prod
L1937.jpg 12" x 25’ Foil Flex R8
Locke Part #: L1944 MFG Part #: 031 12" X 25'
Atco Rubber Prod
Material: Galvanized Metal, Gauge: 28, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Size (in): 12 x 4 x 6 CODY CO INC
Cody251.jpg 12" x 4" x 6" Concrete Box
Locke Part #: L0266 MFG Part #: 2514126
Size (in): 12 x 4 x 6 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 4 x 6 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 4 x 6 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Size (in): 12 x 4 x 6 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Size (in): 12 x 4 x 7 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 4 x 7 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 4 x 7 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Size (in): 12 x 4 x 7 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 4 x 7, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Cody251.jpg 12" x 4" x 8" Concrete Box
Locke Part #: L0267 MFG Part #: 2514146
Size (in): 12 x 4 x 8 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 4 x 8, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Cody104.jpg 12" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7007 MFG Part #: 1042612
Gauge: 26, Size (in): 12, Length (ft): 4 CODY CO INC
L1961.jpg 12" x 5’ Foil Sleeve R6
Locke Part #: L1262 MFG Part #: 010 R-6 12"
Size: 12"x5’ r6, Description Ext.: 010 12" X 5’ FOIL SLEEVE UPC #010 Reinforced sleeves for insulating standard sheet metal pipes., Thick fiberglass insulation for excellent thermal efficiency, Reinforced metalized vapor barrier jacket. Atco Rubber Prod
L1961.jpg 12" x 5’ Foil Sleeve R8
Locke Part #: L1968 MFG Part #: 010 R8 12" X 5'
Size: 12"x5’ r8, Description Ext.: 010 10" X 5’ R8 SLEEVE UPC #010 Reinforced sleeves for insulating standard sheet metal pipes., Thick fiberglass insulation for excellent thermal efficiency, Reinforced metalized vapor barrier jacket. Atco Rubber Prod
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Material: Galvanized Metal, Gauge: 30, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Size (in): 12 x 6 x 6 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 6 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 6 x 7 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 12 x 6 x 7 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 6 x 7 Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall CODY CO INC
Size (in): 12 x 6 x 7 CODY CO INC
Material: Galvanized Metal, Size (in): 12 x 6 x 8, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Size: 12" x 8" - 8", Gauge: 28 GA, Insulation Type: R8 CODY CO INC
L2830.jpg 12" x 8" to 10" x 8" Transition
Locke Part #: L2836 MFG Part #: 17128-108
Description Ext.: 1102128108 2 " RED. FOS SOUTHWARK METAL MFG CO
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Cody645.jpg 12" x 8" x 8" Insulated Register Boot
Locke Part #: L0195 MFG Part #: 6458128
Size (in): 12 x 8 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Cody801.jpg 12" x 8" x 8" Sealed Wye
Locke Part #: L7093 MFG Part #: 8011288
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 12" x 8" x 8" Wye
Locke Part #: L0245 MFG Part #: 8001288
Material: Galvanized Metal, Size (in): 12 x 8 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Gauge: 28, Size (in): 12 x 8 x 8 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
L213-L240Cody.jpg 12" x 9" x 9" Wye
Locke Part #: L0263 MFG Part #: 8001299
Material: Galvanized Metal, Size (in): 12 x 9 x 9 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Size (in): 12 X12 X10 CODY CO INC
Product Image Not Available 12 X 24 X 6 DUCT BOARD BOX
Locke Part #: L6107 MFG Part #: L6107
CODY CO INC
Gauge: 26, Size (in): 12-1/4 x 24-1/4 CODY CO INC
Material: 28 GA Galvanized Metal, Size (in): 12.25 x 24.25 Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Material: 26 GA Galvanized Metal, Size (in): 12.25 x 24.25 Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Gauge: 28, 26-STD, 24, Size (in): 13.5 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Size (in): 13.5 x 19.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Gauge: 28, 26-STD, 24, Size (in): 13.5 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Size (in): 13.5 x 20.25 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
13S Flat 45 Angle.jpg 13S 10X8 FLAT 45 (SQUARE)
Locke Part #: L1473 MFG Part #: 13S108
Type: Metal SOUTHWARK METAL MFG CO 99273502489
13S Flat 45 Angle.jpg 13S 12X8 FLAT 45 (SQUARE)
Locke Part #: L1474 MFG Part #: 13S128
Type: Metal SOUTHWARK METAL MFG CO 99273502519
13S Flat 45 Angle.jpg 13S 14X8 FLAT 45 (SQUARE)
Locke Part #: L1475 MFG Part #: 13S148
Type: Metal SOUTHWARK METAL MFG CO 99273502540
13S Flat 45 Angle.jpg 13S 16X8 FLAT 45 (SQUARE)
Locke Part #: L1476 MFG Part #: 13S168
Type: Metal SOUTHWARK METAL MFG CO 99273502571
13S Flat 45 Angle.jpg 13S 18X8 FLAT 45 (SQUARE)
Locke Part #: L1477 MFG Part #: 13S188
Type: Metal SOUTHWARK METAL MFG CO 99273502601
13S Flat 45 Angle.jpg 13S 20X8 FLAT 45 (SQUARE)
Locke Part #: L1478 MFG Part #: 13S208
Type: Metal SOUTHWARK METAL MFG CO 99273502632
13S Flat 45 Angle.jpg 13S 22X8 FLAT 45 (SQUARE)
Locke Part #: L1479 MFG Part #: 13S228
Type: Metal SOUTHWARK METAL MFG CO 99273502663
13S Flat 45 Angle.jpg 13S 24X8 FLAT 45 (SQUARE)
Locke Part #: L1480 MFG Part #: 13S248
Type: Metal SOUTHWARK METAL MFG CO 99273502694
13S Flat 45 Angle.jpg 13S 8X8 FLAT 45 (SQUARE)
Locke Part #: L1472 MFG Part #: 13S88
Type: Metal SOUTHWARK METAL MFG CO 99273502755
L1675.jpg 14" 26 Gauge 90° Tee
Locke Part #: L1699 MFG Part #: 10602614
Description Ext.: 10602614 14" TEE 26 GA SOUTHWARK METAL MFG CO
L1625.jpg 14" 90° Elbow
Locke Part #: L1634 MFG Part #: 901428
Description Ext.: 10051426 14 90 ELL SOUTHWARK METAL MFG CO
Material: G-90 Galvanized, Gauge: 26, Diameter (in): 14 Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
L120-L132Cody.jpg 14" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7029 MFG Part #: 1252414
Material: Galvanized Metal, Gauge: 24, Size (in): 14, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
L120-L132Cody.jpg 14" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0129 MFG Part #: 12514
Material: Galvanized Metal, Gauge: 30, Size (in): 14, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
Description Ext.: 14"26GA AT/SD STR COL AIR-TITE INC
Description Ext.: 14"ATD 26GA STRT COLLAR AIR-TITE INC
Description Ext.: 14"ATT 26GA STRT COLLAR AIR-TITE INC
Gauge: 28, Size (in): 14 Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
L1371.jpg 14" Damper with Hardware, 26 Gauge
Locke Part #: L1377 MFG Part #: 14" DAMPER W/HW
Description Ext.: 14" 26GA DMPR & HDWRE AIR-TITE INC
Cody661.jpg 14" Ductboard Triangle
Locke Part #: L6103 MFG Part #: 14" DUCT BD TRI
Size (in): 14 CODY CO INC
R443.jpg 14" PVC Air Duct 90° Elbow
Locke Part #: R0444 MFG Part #: L149P
Description Ext.: 14" PVC AIR DUCT 90 ELL GENERAL PLASTICS
r558.jpg 14" PVC Air Duct Start Collar
Locke Part #: R0564 MFG Part #: SC14P
Description Ext.: 14" PVC AIR DUCT START GENERAL PLASTICS
L1509.jpg 14" Rectangular "S" Lock
Locke Part #: L1511 MFG Part #: 6S14
Description Ext.: 110414 14 RECT S-LOCK SOUTHWARK METAL MFG CO
Cody500.jpg 14" Round Sheet Metal Starting Collar
Locke Part #: L0281 MFG Part #: 50014
Material: Galvanized Metal, Diameter (in): 14 Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
l7240Cody.jpg 14" Spiral Pipe Coupling
Locke Part #: L7244 MFG Part #: 11814
Diameter (in): 14 CODY CO INC
L7230Cody.jpg 14" Spiral Pipe End Cap
Locke Part #: L7234 MFG Part #: 119S14
Diameter (in): 14 CODY CO INC
Cody076.jpg 14" Spiral Pipe Hanger
Locke Part #: L7258 MFG Part #: 07614
Diameter (in): 14 CODY CO INC
Cody550.jpg 14" Starting Collar For Ductboard
Locke Part #: L0046 MFG Part #: 55014
Diameter (in): 14 CODY CO INC
L7050.jpg 14" Starting Collar with Damper
Locke Part #: L7054 MFG Part #: 548 14"
Diameter (in): 14 CODY CO INC
CODY CO INC
L213-L240Cody.jpg 14" x 10" x 10" Wye
Locke Part #: L0208 MFG Part #: 800141010
Material: Galvanized Metal, Size (in): 14 x 10 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
r59.jpg 14" x 10’ PVC Air Duct Pipe
Locke Part #: R0068 MFG Part #: 14 X 10 50 PSI
Description Ext.: 14 X 10 PVC AIR DUCT Belled at One End KROY IND INC
Material: G-90 Galvanized, Gauge: 26, Diameter (in): 14, Length (ft): 10, Est Wt/Ft: 3.72 lb. Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
r467.jpg 14" x 12" PVC Air Duct Reducer
Locke Part #: R0543 MFG Part #: RC14P
Description Ext.: 14 X 12 PVC AIR DUCT GENERAL PLASTICS
Material: Galvanized Metal, Gauge: 28, Size (in): 14 x 12 Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
L7222-L7228Cody.jpg 14" x 12" Spiral Pipe Reducer
Locke Part #: L7223 MFG Part #: 1201412
Diameter (in): 14 x 12 Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
L213-L240Cody.jpg 14" x 12" x 10" Wye
Locke Part #: L0253 MFG Part #: 800141210
Material: Galvanized Metal, Size (in): 14 x 12 x 10 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
r460.jpg 14" x 12" x 12" PVC Air Duct Wye
Locke Part #: R0541 MFG Part #: Y422P
Description Ext.: 14 X 12 X 12 PVC AIR GENERAL PLASTICS
L213-L240Cody.jpg 14" x 12" x 12" Wye
Locke Part #: L0252 MFG Part #: 800141212
Material: Galvanized Metal, Size (in): 14 x 12 x 12 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
L213-L240Cody.jpg 14" x 12" x 8" Wye
Locke Part #: L0254 MFG Part #: 80014128
Material: Galvanized Metal, Size (in): 14 x 12 x 8 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 14 x 12 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 14 x 14 x 12 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Cody645.jpg 14" x 14" x 12" Insulated Register Boot
Locke Part #: L0175 MFG Part #: 645141412
Size (in): 14 x 14 x 12 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
L2428.jpg 14" x 14" x 12" Rect. to Rnd Ceiling Box, 30ga.
Locke Part #: L2428 MFG Part #: 14X14X12 BOX
Description Ext.: RECT/RD TRANS BX AIR-TITE INC
L213-L240Cody.jpg 14" x 14" x 12" Wye
Locke Part #: L0251 MFG Part #: 800141412
Material: Galvanized Metal, Size (in): 14 x 14 x 12 Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C CODY CO INC
Gauge: 28, Size (in): 14 x 14 x 12 Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Cody825.jpg 14" x 14" x 14" Furnace Tee
Locke Part #: L1209 MFG Part #: 825141414
Material: Galvanized Metal, Size (in): 14x14x14 Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C CODY CO INC
R0464.jpg 14" x 16" x 48" Elbow
Locke Part #: R0548 MFG Part #: P1468
Description Ext.: 14 X 16 X 48 PVC AIR DUC GENERAL PLASTICS
R0464.jpg 14" x 18" x 60" Elbow
Locke Part #: R0549 MFG Part #: P1480
Description Ext.: 14 X 18 X 60 PVC AIR DUC GENERAL PLASTICS
R0464.jpg 14" x 18" x 72" Elbow
Locke Part #: R0550 MFG Part #: P1482
Description Ext.: 14 X 18 X 72 PVC AIR DUC GENERAL PLASTICS
R0464.jpg 14" x 18" x 96" Elbow
Locke Part #: R0579 MFG Part #: P1486
Description Ext.: 14X18X96 PVC PLEN 8" EXT GENERAL PLASTICS
Material: Galvanized Metal, Size (in): 14 x 2-1/4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Size (in): 14 X 2-1/4 X 6 CODY CO INC
Product Image Not Available 14" X 25' UNINSUL FLEX DUCT 50
Locke Part #: L1289 MFG Part #: 14" 050
Atco Rubber Prod
L1970.jpg 14" x 25’ Foil Flex Duct R-6 100’
Locke Part #: L1978 MFG Part #: 036 14" R6 BAG
Description Ext.: 036 14" X 25’ FOIL FLEX Atco Rubber Prod
L1937.jpg 14" x 25’ Foil Flex R8
Locke Part #: L1945 MFG Part #: 031 14" X 25'
Atco Rubber Prod
Material: Galvanized Metal, Gauge: 28, Length (ft): 3, Packing: 3’ - 30’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Size (in): 14 x 4 x 6 CODY CO INC
Cody251.jpg 14" x 4" x 6" Concrete Box
Locke Part #: L0270 MFG Part #: 2514128
Size (in): 14 x 4 x 6 CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 4 x 6 Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 4 x 6, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 4 x 7, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Size (in): 14 x 4 x 8 CODY CO INC
Cody251.jpg 14" x 4" x 8" Concrete Box
Locke Part #: L0271 MFG Part #: 2514148
Size (in): 14 x 4 x 8 CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 4 x 8 Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings CODY CO INC
Size (in): 14 x 4 x 8 CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 4 x 8, Inlet Sizes: 4” to 10” Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Cody104.jpg 14" x 4’ Furnace Pipe, 26 Gauge
Locke Part #: L7008 MFG Part #: 1042614
Gauge: 26, Size (in): 14, Length (ft): 4 CODY CO INC
L1961.jpg 14" x 5’ Foil Sleeve R6
Locke Part #: L1263 MFG Part #: 010 R-6 14"
Size: 14"x5’ r6, Description Ext.: 010 14" X 5’ FOIL SLEEVE UPC #010 Reinforced sleeves for insulating standard sheet metal pipes., Thick fiberglass insulation for excellent thermal efficiency, Reinforced metalized vapor barrier jacket. Atco Rubber Prod
L1961.jpg 14" x 5’ Foil Sleeve R8
Locke Part #: L1969 MFG Part #: 010 R8 14" X 5'
Size: 14"x5’ r8, Description Ext.: 010 12" X 5’ R8 SLEEVE UPC #010 Reinforced sleeves for insulating standard sheet metal pipes., Thick fiberglass insulation for excellent thermal efficiency, Reinforced metalized vapor barrier jacket. Atco Rubber Prod
L1623.jpg 14" x 5’ Galv. Pipe, 28 Gauge
Locke Part #: L1648 MFG Part #: SL601428
Description Ext.: 1008601426 14 X 5 FURNAC SOUTHWARK METAL MFG CO
Material: Galvanized Metal, Gauge: 28, Length (ft): 5, Packing: 5’ - 50’ per bundle Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 6 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Gauge: 28, Size (in): 14 x 6 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs CODY CO INC
Material: Galvanized Metal, Size (in): 14 x 6 x 8 Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall CODY CO INC
Size (in): 14 x 6 x 8 CODY CO INC
L2830.jpg 14" x 8" to 12" x 8" Transition
Locke Part #: L2837 MFG Part #: 17148-128
Description Ext.: 1102148128 2" RED. FOS. SOUTHWARK METAL MFG CO
Material: Galvanized Steel, Size (in): 14 x 8 x 9 30 GA Galvanized Steel, 1 Flange for Rails CODY CO INC
Product Image Not Available 14 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6150 MFG Part #: L6150
CODY CO INC
CODY CO INC
Material: 28 GA Galvanized Metal, Size (in): 14.25 x 24.25 Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Material: 26 GA Galvanized Metal, Size (in): 14.25 x 24.25 Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Material: 28 GA Galvanized Metal, Size (in): 14.25 x 30.25 Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Material: 26 GA Galvanized Metal, Size (in): 14.25 x 30.25 Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
14S Flat 90 Elbow.jpg 14S 10X8 FLAT 90 (SQUARE)
Locke Part #: L1464 MFG Part #: 14S108
Type: Metal SOUTHWARK METAL MFG CO 99273502830
14S Flat 90 Elbow.jpg 14S 12X8 FLAT 90 (SQUARE)
Locke Part #: L1465 MFG Part #: 14S128
Type: Metal SOUTHWARK METAL MFG CO 99273502861
14S Flat 90 Elbow.jpg 14S 14X8 FLAT 90 (SQUARE)
Locke Part #: L1466 MFG Part #: 14S148
Type: Metal SOUTHWARK METAL MFG CO 99273502915
14S Flat 90 Elbow.jpg 14S 16X10 FLAT 90 (SQUARE)
Locke Part #: L2824 MFG Part #: 14S1610
Type: Metal SOUTHWARK METAL MFG CO 99273502946
14S Flat 90 Elbow.jpg 14S 16X8 FLAT 90 (SQUARE)
Locke Part #: L1467 MFG Part #: 14S168
Type: Metal SOUTHWARK METAL MFG CO 99273502960
14S Flat 90 Elbow.jpg 14S 18X8 FLAT 90 (SQUARE)
Locke Part #: L1468 MFG Part #: 14S188
Type: Metal SOUTHWARK METAL MFG CO 99273503004
14S Flat 90 Elbow.jpg 14S 20X10 FLAT 90 (SQUARE)
Locke Part #: L2825 MFG Part #: 14S2010
Type: Metal SOUTHWARK METAL MFG CO 99273503011
14S Flat 90 Elbow.jpg 14S 20X8 FLAT 90 (SQUARE)
Locke Part #: L1469 MFG Part #: 14S208
Type: Metal SOUTHWARK METAL MFG CO 99273503035
14S Flat 90 Elbow.jpg 14S 22X8 FLAT 90 (SQUARE)
Locke Part #: L1470 MFG Part #: 14S228
Type: Metal SOUTHWARK METAL MFG CO 99273503066
14S Flat 90 Elbow.jpg 14S 24X10 FLAT 90 (SQUARE)
Locke Part #: L2826 MFG Part #: 14S2410
Type: Metal SOUTHWARK METAL MFG CO 99273503097
14S Flat 90 Elbow.jpg 14S 24X8 FLAT 90 (SQUARE)
Locke Part #: L1471 MFG Part #: 14S248
Type: Metal SOUTHWARK METAL MFG CO 99273503110
14S Flat 90 Elbow.jpg 14S 8X8 FLAT 90 (SQUARE)
Locke Part #: L1463 MFG Part #: 14S88
Type: Metal SOUTHWARK METAL MFG CO 99273503219
Gauge: 28, 26-STD, 24, Size (in): 15.75 x 16.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Size (in): 15.75 x 16.75 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Gauge: 28, 26-STD, 24, Size (in): 15.75 x 22 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Size (in): 15.75 x 22 x 48 ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Width (in): 47.5, Length (ft): 100, Thickness (in): 1, K-Value (Btu•in / h•ft²•°F): 0.24, K-Value (W / m•°C): 0.035, R-Value (h•ft²•°F / Btu): 4.2, R-Value (m²•°C / W): 0.73, Product Type: 150, Water Vapor Sorption: ASTM C1104 < 3% by weight, Corrosiveness: ASTM C665 Pass, Bacteria Resistance: ASTM G22 No Growth, Fungi Resistance: ASTM C1338 and ASTM G21 Pass; No Growth, Water Repellency Rating: INDA IST 80.6-92 > 4, Density: 1.5 pcf (24 kg/m2), C-Value (Btu / h•ft²•°F): 0.24, C-Value (W / m²•°C): 1.36, NRC: 0.70 Quiet Operation: ToughGard duct liner helps absorb equipment and air rush noises over a broad spectrum of sound. Noise is trapped and dissipated within the glass fiber matrix., Thermal Protection: All products offer excellent thermal-insulating properties and lower HVAC operating costs by reducing energy consumption. This saves natural resources and reduces emissions into the atmosphere., Water Repellency: The thermal properties of duct liner help control condensation, which helps improve indoor air quality by reducing unwanted moisture, Low Emitting: Certified by the GREENGUARD Environmental Institute., Low Air Resistance: The smooth ToughGard air stream surface offers low air resistance to deliver efficient HVAC system operation., Resists Microbial Growth: The air stream surface contains an EPA registered antimicrobial agent in order to reduce the potential of microbial growth that may affect this product. The antimicrobial properties are intended to only protect this product., Durable: The strength and resiliency of the ToughGard surface provides outstanding resistance against puncturing, tearing and other damage during fabrication, installation, and periodic system maintenance., Long-lasting and Non-corrosive: Inert fiber glass will not deteriorate or provide sustenance for vermin or rodents, and it will not corrode the sheet metal it insulates., Applicable Standards:, Model Building Codes:, Material Standards:, Fire Safety Standards:, Fire Hazard Classification:, Limited Combustible:, Physical/Chemical Properties:, Operating Limits:, Temperature:, Air Velocity:, ICC, California Title 24, ASTM C1071, Type I, CAN/CGSB-S1.11-92, NFPA 90A, NFPA 90B, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, NFPA 259 CERTAINTEED INSULATION 740377968816
CERTAINTEED INSULATION 740377091156
15S Vertical 45 Angle.jpg 15S 10X8 VERT 45 (SQUARE)
Locke Part #: L1482 MFG Part #: 15S108
Type: Metal SOUTHWARK METAL MFG CO 99273503578
15S Vertical 45 Angle.jpg 15S 12X8 VERT 45 (SQUARE)
Locke Part #: L1483 MFG Part #: 15S128
Type: Metal SOUTHWARK METAL MFG CO 99273503608
15S Vertical 45 Angle.jpg 15S 14X8 VERT 45 (SQUARE)
Locke Part #: L1484 MFG Part #: 15S148
Type: Metal SOUTHWARK METAL MFG CO 99273503639
15S Vertical 45 Angle.jpg 15S 16X8 VERT 45 (SQUARE)
Locke Part #: L1485 MFG Part #: 15S168
Type: Metal SOUTHWARK METAL MFG CO 99273503660
15S Vertical 45 Angle.jpg 15S 18X8 VERT 45 (SQUARE)
Locke Part #: L1486 MFG Part #: 15S188
Type: Metal SOUTHWARK METAL MFG CO 99273503691
15S Vertical 45 Angle.jpg 15S 20X8 VERT 45 (SQUARE)
Locke Part #: L1487 MFG Part #: 15S208
Type: Metal SOUTHWARK METAL MFG CO 99273503721
15S Vertical 45 Angle.jpg 15S 22X8 VERT 45 (SQUARE)
Locke Part #: L1488 MFG Part #: 15S228
Type: Metal SOUTHWARK METAL MFG CO 99273503752
15S Vertical 45 Angle.jpg 15S 24X8 VERT 45 (SQUARE)
Locke Part #: L1489 MFG Part #: 15S248
Type: Metal SOUTHWARK METAL MFG CO 99273503783
90 Elbow.jpg 16" 26GA ELBOW
Locke Part #: L1635 MFG Part #: 901626
Type: Metal SOUTHWARK METAL MFG CO 99273524733
Material: G-90 Galvanized, Gauge: 26, Diameter (in): 16 Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
L120-L132Cody.jpg 16" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7030 MFG Part #: 1252416
Material: Galvanized Metal, Gauge: 24, Size (in): 16, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
L120-L132Cody.jpg 16" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L0130 MFG Part #: 12516
Material: Galvanized Metal, Gauge: 30, Size (in): 16, Throat Dimension: 3" Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
Description Ext.: 16"ATT 26GA STRT COLLAR AIR-TITE INC
Gauge: 28, Size (in): 16 Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
Cody661.jpg 16" Ductboard Triangle
Locke Part #: L6104 MFG Part #: 16" DUCT BD TRI
Size (in): 16 CODY CO INC