Loading ...

Search in: Duct Work Category

<
Product Image Not Available "8 PVC AIR DUCT COUPLING C800P
Locke Part #: R0611 MFG Part #: C800P
GENERAL PLASTICS
Product Image Not Available #85 6 X 12 X 6 INS. STRAIGHT CLG. BOOT
Locke Part #: L3001 MFG Part #: 856126
SOUTHWARK METAL MFG CO
Product Image Not Available #85 6 X 12 X 8 INS. STRAIGHT CLG. BOOT
Locke Part #: L3002 MFG Part #: 856128
SOUTHWARK METAL MFG CO
.475" For all 1/2", 2lb. Liner Box of 1000
Locke Part #: L0510 MFG Part #: LF CMF050
The premium quality impact fastener Thru insulation impact fasteners. CAIN MFG. CO INC
.63" dia for all 1", 12lb. Liner Box of 1000
Locke Part #: L0529 MFG Part #: LF CMF 100
The premium quality impact fastener Thru insulation impact fasteners. CAIN MFG. CO INC
Product Image Not Available 036 20" X 25' FOIL FLEX R-6
Locke Part #: L1256 MFG Part #: 036 20"
Atco
Lower Energy Usage: Duct wrap products provide thermal efficiency that reduces unwanted heat loss or gain from equipment and ductwork. This means a likely savings of energy and improved system performance., Condensation Control: When properly installed in the correct thickness, duct wrap virtually eliminates condensation problems on cold duct surfaces., SoftTouch: Our duct wrap products are now made with SoftTouch for a softer, less itchy product., Applicable Standards:, Material Standards:, ASTM C1290, ASTM C553, Type I; Type 75 Duct Wrap, Type II; Type 100 &amp; 150 Duct Wrap, Type III; Type 150 Duct Wrap, CAN/CGSB-51.11-92, ASTM C1136, FSK and white PSK, Type II, Gray PSK, Type IV, Fire Resistance:, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102-M88, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Non-Combustible: ASTM E136, Meets tests requirements, Physical/Chemical Properties:, Operating Limits:, Temperature: ASTM C411, Faced: Max. 250 F (121 C), Unfaced: Max. 450 F (232 C), Water Vapor Transmission, Facing: ASTM E96, Dessicant Method, FSK and white PSK: Max. 0.02 perms - 1.15 x 10-9 g/, Pa-s-m2, Gray PSK: Max. 0.09 perms - 5.17 x 10-9 g/, Pa-s-m2, Corrosiveness: ASTM C665, Pass test requirements, Fungi Resistance: ASTM C1338, Pass test requirements, Odor Emission: ASTM C1304, Pass test requirements CERTAINTEED INSULATION 740377932619
Features:, Lower Energy Usage: Duct wrap products provide thermal efficiency that reduces unwanted heat loss or gain from equipment and ductwork. This means a likely savings of energy and improved system performance., Condensation Control: When properly installed in the correct thickness, duct wrap virtually eliminates condensation problems on cold duct surfaces., SoftTouch: Our duct wrap products are now made with SoftTouch for a softer, less itchy product., Applicable Standards:, Material Standards:, ASTM C1290, ASTM C553, Type I; Type 75 Duct Wrap, Type II; Type 100 &amp; 150 Duct Wrap, Type III; Type 150 Duct Wrap, CAN/CGSB-51.11-92, ASTM C1136, FSK and white PSK, Type II, Gray PSK, Type IV, Fire Resistance:, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102-M88, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Non-Combustible: ASTM E136, Meets tests requirements, Physical/Chemical Properties:, Operating Limits:, Temperature: ASTM C411, Faced: Max. 250 F (121 C), Unfaced: Max. 450 F (232 C), Water Vapor Transmission, Facing: ASTM E96, Dessicant Method, FSK and white PSK: Max. 0.02 perms - 1.15 x 10-9 g/Pa-s-m2, Gray PSK: Max. 0.09 perms - 5.17 x 10-9 g/Pa-s-m2, Corrosiveness: ASTM C665, Passes test requirements, Fungi Resistance: ASTM C1338, Passes test requirements, Odor Emission: ASTM C1304, Pass test requirements CERTAINTEED INSULATION 740377932626
Lower Energy Usage: Duct wrap products provide thermal efficiency that reduces unwanted heat loss or gain from equipment and ductwork. This means a likely savings of energy and improved system performance., Condensation Control: When properly installed in the correct thickness, duct wrap virtually eliminates condensation problems on cold duct surfaces., SoftTouch: Our duct wrap products are now made with SoftTouch for a softer, less itchy product., Applicable Standards:, Material Standards:, ASTM C1290, ASTM C553, Type I; Type 75 Duct Wrap, Type II; Type 100 &amp; 150 Duct Wrap, Type III; Type 150 Duct Wrap, CAN/CGSB-51.11-92, ASTM C1136, FSK and white PSK, Type II, Gray PSK, Type IV, Fire Resistance:, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102-M88, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Non-Combustible: ASTM E136, Meets tests requirements, Physical/Chemical Properties:, Operating Limits:, Temperature: ASTM C411, Faced: Max. 250 F (121 C), Unfaced: Max. 450 F (232 C), Water Vapor Transmission, Facing: ASTM E96, Dessicant Method, FSK and white PSK: Max. 0.02 perms - 1.15 x 10-9 g/, Pa-s-m2, Gray PSK: Max. 0.09 perms - 5.17 x 10-9 g/, Pa-s-m2, Corrosiveness: ASTM C665, Pass test requirements, Fungi Resistance: ASTM C1338, Pass test requirements, Odor Emission: ASTM C1304, Pass test requirements CERTAINTEED INSULATION 740377932657
1" Pin Size 1" H.D. 3 Lb. Liner Box of 1000
Locke Part #: L0543 MFG Part #: LF CWF 150
Thru Insulation weld fastener. Sharp Rolled Point CAIN MFG. CO INC
1" Pin Size 1" H.D. 3 Lb. Liner Box of 5000
Locke Part #: L0542 MFG Part #: LF-CWF-150B
Thru Insulation weld fastener. Sharp Rolled Point CAIN MFG. CO INC
Acoustically Excellent, Keeps air rush and equipment noise in a home to a minimum., Helps reduce noise generated by cross talk, system expansion and air movement., Thermally Efficient, Improves energy efficiency and saves homeowners money by reducing heat loss or gain., Duct board system with properly sealed joints virtually eliminates leakage common with sheet metal ducts., Reduces or eliminates call-backs and results in satisfied homeowners., Moisture Resistant, Provides superior moisture resistance compared to other duct boards., Reduces homeowner concern about problems from condensation, mold and bacterial growth., Cleanable, Easily cleaned thanks to abrasion-resistant airstream surface., Surface is treated with an EPA-registered antimicrobial agent to reduce the potential for microbial growth., Cost Effective, Resists damage during fabrication, installation, and cleaning., Generally costs less than sheet metal ductwork. Costs less than bare sheet metal systems., Makes HVAC equipment downsizing possible. Delivers maximum heating and cooling comfort., Provides exceptional acoustical performance. Improves indoor air quality., Helps eliminate condensation problems. Provides energy savings for homeowner., Applicable Standards:, Material Standards: UL 181, Class 1 Rigid Air Duct, Fire Resistance:, Surface Burning Characteristics: UL 723 and ASTM E84, Max. Flame Spread Index: 25, Max. Smoke Developed Index: 50, Limited Combustible: NFPA 259, &lt; 3,500 BTU/lb., Fire Safety Standards : NFPA 90A, NFPA 90B, Physical/Chemical Properties:, Operating Limits:, Temperature (ASTM C411): Max. 250, F (121, C), Air Velocity (UL 181): Max. 5,000 fpm (25.4 m/s), Static Pressure (UL 181): 2" wc (498 Pa), Ambient Temperature: 150 F (66 C), Bacteria Resistance: ASTM G22, No Growth, Fungi Resistance:, UL 181, ASTM C1338 &amp; ASTM G21, Pass; No Growth, Water Repellency Rating:, &gt; 4 (INDA IST 80.6-92), Water Vapor Transmission (Facing):, ASTM E96, Desicant Method Max. 0.02 perms (1.15 x 10-9 g/Pa-s-m2) CERTAINTEED INSULATION
1-1/4" Duct Board Straight Clear Pins
Locke Part #: L0514 MFG Part #: LFWP114
CAIN MFG. CO INC
1-1/4" Self AdhesiveHanger
Locke Part #: L1332 MFG Part #: LF-SP-1250
CAIN MFG. CO INC
CAIN MFG. CO INC
1/2" Pin Size 1/2" 2 Lb. Liner Box of 5000
Locke Part #: L0541 MFG Part #: LF-CWF-50B
Thru Insulation weld fastener. Sharp Rolled Point CAIN MFG. CO INC
CODY CO INC
CODY CO INC
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
10" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7027 MFG Part #: 1252610
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
10" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7015 MFG Part #: 1252810
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
10" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0127 MFG Part #: 12510
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
AIR-TITE INC
AIR-TITE INC
AIR-TITE INC
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
10" Damper with Hardware, 26 Gauge
Locke Part #: L1375 MFG Part #: 10" DAMPER W/HW
plenum, secure with sheet metal screws. This will, assure air tight seal &amp; give the needed support for the, duct work. On the duct board longer screws &amp; back, plates should be used to strengthen duct board., Dampers Only Complete With All Hardware Assembled AIR-TITE INC
10" Ductboard Triangle
Locke Part #: L6101 MFG Part #: 10" DUCT BRD TI
CODY CO INC
10" Inline Adjustable Damper
Locke Part #: L7037 MFG Part #: 32010
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 &amp; B2 Stand Off s by request CODY CO INC
10" Multifit 45° PVC Wye
Locke Part #: R0570 MFG Part #: B1086
8" Fitting Fits:, 6" x 4" x 4", 6" x 6" x 4", 6" x 6" x 6", 8" x 6" x 4",, 8" x 6" x 6", 8" x 8" x 4", 10" Fitting Fits:, 8" x 6" x 6", 8" x 8" x 6", 8" x 8" x 8", 10" x 6" x 6", 10" x 8" x 6", 10" x 8" x 8", 10" x 10" x 6", 10" x 10" x 8", One Fits Most Popular Sizes. Stock Only One Wye. Cut To Fit GENERAL PLASTICS
10" PVC Air Duct 45° Elbow
Locke Part #: R0450 MFG Part #: EB145
GENERAL PLASTICS
10" PVC Air Duct 90° Elbow
Locke Part #: R0442 MFG Part #: EB190
GENERAL PLASTICS
10" PVC Air Duct Coupling
Locke Part #: R0612 MFG Part #: C100P
GENERAL PLASTICS
10" PVC Air Duct Start Collar
Locke Part #: R0561 MFG Part #: SC10P
GENERAL PLASTICS
10" PVC End Cap
Locke Part #: R0546 MFG Part #: EC10P
GENERAL PLASTICS
AIR-TITE INC
CODY CO INC
10" Round Sheet Metal Starting Collar
Locke Part #: L0279 MFG Part #: 50010
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
10" Spiral Pipe Coupling
Locke Part #: L7242 MFG Part #: 11810
CODY CO INC
10" Spiral Pipe End Cap
Locke Part #: L7232 MFG Part #: 119S10
CODY CO INC
10" Starting Collar For Ductboard
Locke Part #: L0044 MFG Part #: 55010
CODY CO INC
CODY CO INC
10" x 10" x 10" Furnace Tee
Locke Part #: L1207 MFG Part #: 825101010
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B &amp; C CODY CO INC
10" x 10" x 10" Wye
Locke Part #: L0236 MFG Part #: 800101010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
10" x 10" x 6" Wye
Locke Part #: L0233 MFG Part #: 80010106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
10" x 10" x 7" Insulated Register Boot
Locke Part #: L0177 MFG Part #: 64510107
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem &amp; bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem &amp; bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
10" x 10" x 8" Hi Side Insulated Boot
Locke Part #: L7048 MFG Part #: 64810108
CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
10" x 10" x 8" Insulated Register Boot
Locke Part #: L0159 MFG Part #: 64510108
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem &amp; bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem &amp; bead, 4 Tall Body, Register and collar size embossed on product CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
30 GA Galvanized Steel, 1 Flange for Rails CODY CO INC
10" x 10" x 8" Wye
Locke Part #: L0235 MFG Part #: 80010108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
10" x 10' PVC Air Duct Pipe
Locke Part #: R0062 MFG Part #: 10 X 10 50 PSI
Belled at One End KROY IND INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
Increase type with flange &amp; damper CODY CO INC
10" x 4" x 4" Concrete Box
Locke Part #: L0259 MFG Part #: 2514104
CODY CO INC
CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
CODY CO INC
10" x 4" x 6" Concrete Box
Locke Part #: L0265 MFG Part #: 2514106
CODY CO INC
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar &amp; Register Openings, Flange for snap on rails CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
10" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7006 MFG Part #: 1042610
CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 &amp; R8 is fabricated without flange for snap on rails, Body is 4 tall CODY CO INC
CODY CO INC
10" x 6" x 6" Wye
Locke Part #: L0240 MFG Part #: 8001066
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
CODY CO INC
10" x 8" PVC Air Duct Reducer
Locke Part #: R0469 MFG Part #: RC10P
GENERAL PLASTICS
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
10" x 8" Spiral Pipe Reducer
Locke Part #: L7221 MFG Part #: 120108
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
10" x 8" x 6" Sealed Wye
Locke Part #: L7092 MFG Part #: 8011086
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B &amp; C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
10" x 8" x 6" Wye
Locke Part #: L0238 MFG Part #: 8001086
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
10" x 8" x 7" Wye
Locke Part #: L0232 MFG Part #: 8001087
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
CODY CO INC
10" x 8" x 8" Sealed Wye
Locke Part #: L7090 MFG Part #: 8011088
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B &amp; C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
10" x 8" x 8" Wye
Locke Part #: L0237 MFG Part #: 8001088
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
10" x 9" x 5" Wye
Locke Part #: L0234 MFG Part #: 8001095
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
10" x 9" x 6" Wye
Locke Part #: L0241 MFG Part #: 8001096
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
10" x 9" x 7" Wye
Locke Part #: L0239 MFG Part #: 8001097
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
10' "S" Cleat for Rectangular Duct
Locke Part #: L0073 MFG Part #: 03010
CODY CO INC
10' Drive Cleat for Rectangular Duct
Locke Part #: L0074 MFG Part #: 0352610
CODY CO INC
CODY CO INC
Product Image Not Available 12 X 24 X 6 DUCT BOARD BOX
Locke Part #: L6107 MFG Part #: L6107
CODY CO INC
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
12" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7028 MFG Part #: 1252612
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
12" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0128 MFG Part #: 12512
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
AIR-TITE INC
AIR-TITE INC
AIR-TITE INC
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
12" Damper with Hardware, 26 Gauge
Locke Part #: L1376 MFG Part #: 12" DAMPER W/HW
plenum, secure with sheet metal screws. This will, assure air tight seal &amp; give the needed support for the, duct work. On the duct board longer screws &amp; back, plates should be used to strengthen duct board., Dampers Only Complete With All Hardware Assembled AIR-TITE INC
12" Ductboard Triangle
Locke Part #: L6102 MFG Part #: 12" DUCT BD TRI
CODY CO INC
12" Inline Adjustable Damper
Locke Part #: L7038 MFG Part #: 32012
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 &amp; B2 Stand Off s by request CODY CO INC
12" PVC Air Duct 45° Elbow
Locke Part #: R0451 MFG Part #: L125P
GENERAL PLASTICS
12" PVC Air Duct 90° Elbow
Locke Part #: R0443 MFG Part #: L129P
GENERAL PLASTICS
12" PVC Air Duct Coupling
Locke Part #: R0613 MFG Part #: C120P
GENERAL PLASTICS
12" PVC Air Duct Start Collar
Locke Part #: R0562 MFG Part #: SC12P
GENERAL PLASTICS
12" PVC End Cap
Locke Part #: R0547 MFG Part #: EC12P
GENERAL PLASTICS
AIR-TITE INC
12" Round Sheet Metal Starting Collar
Locke Part #: L0280 MFG Part #: 50012
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
12" Spiral Pipe Coupling
Locke Part #: L7243 MFG Part #: 11812
CODY CO INC
12" Spiral Pipe End Cap
Locke Part #: L7233 MFG Part #: 119S12
CODY CO INC
12" Spiral Pipe Hanger
Locke Part #: L7257 MFG Part #: 07612
CODY CO INC
12" Starting Collar For Ductboard
Locke Part #: L0045 MFG Part #: 55012
CODY CO INC
12" x 10" PVC Air Duct Reducer
Locke Part #: R0542 MFG Part #: RC12P
GENERAL PLASTICS
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
12" x 10" Spiral Pipe Reducer
Locke Part #: L7222 MFG Part #: 120108
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
12" x 10" x 10" PVC Air Duct Wye
Locke Part #: R0539 MFG Part #: Y100P
GENERAL PLASTICS
12" x 10" x 10" Sealed Wye
Locke Part #: L7091 MFG Part #: 801121010
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B &amp; C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 10" x 10" Wye
Locke Part #: L0244 MFG Part #: 800121010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 10" x 6" Wye
Locke Part #: L0247 MFG Part #: 80012106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 10" x 8" PVC Air Duct Wye
Locke Part #: R0540 MFG Part #: Y118P
GENERAL PLASTICS
12" x 10" x 8" Sealed Wye
Locke Part #: L7094 MFG Part #: 80112108
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B &amp; C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 10" x 8" Wye
Locke Part #: L0246 MFG Part #: 80012108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 10' PVC Air Duct Pipe
Locke Part #: R0063 MFG Part #: 12 X 10 50 PSI
Belled at One End KROY IND INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
CODY CO INC
12" x 12" x 10" Insulated Register Boot
Locke Part #: L0182 MFG Part #: 645121210
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
12" x 12" x 12" Furnace Tee
Locke Part #: L1208 MFG Part #: 825121212
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B &amp; C CODY CO INC
12" x 12" x 12" Wye
Locke Part #: L0243 MFG Part #: 800121212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 12" x 6" Wye
Locke Part #: L0242 MFG Part #: 80012126
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
12" x 12" x 8" Wye
Locke Part #: L0248 MFG Part #: 80012128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 16" x 48" Elbow
Locke Part #: R0464 MFG Part #: P1268
GENERAL PLASTICS
12" x 18" x 120" Elbow
Locke Part #: R0447 MFG Part #: P1281
GENERAL PLASTICS
12" x 18" x 60" Elbow
Locke Part #: R0462 MFG Part #: P1280
GENERAL PLASTICS
12" x 18" x 72" Elbow
Locke Part #: R0463 MFG Part #: P1282
GENERAL PLASTICS
12" x 18" x 96" Elbow
Locke Part #: R0576 MFG Part #: P1286
GENERAL PLASTICS
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
CODY CO INC
12" x 4" x 6" Concrete Box
Locke Part #: L0266 MFG Part #: 2514126
CODY CO INC
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar &amp; Register Openings, Flange for snap on rails CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
CODY CO INC
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar &amp; Register Openings, Flange for snap on rails CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
12" x 4" x 8" Concrete Box
Locke Part #: L0267 MFG Part #: 2514146
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
12" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7007 MFG Part #: 1042612
CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 &amp; R8 is fabricated without flange for snap on rails, Body is 4 tall CODY CO INC
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
CODY CO INC
12" x 8" to 10" x 8" Transition
Locke Part #: L2836 MFG Part #: 17128-108
SOUTHWARK METAL MFG CO
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
Constructed of 30 GA Galvanized Metal w/R6 Insulator made of 100% recyclable material *UL Classified, One piece body NO Sealing, Seamless fold corners Flange mount on boot Holes for grill screws, No additional taping or sealing needed, Optional insulated or non- with R6 or wrapped R8 M & M MFG
12" x 8" x 8" Insulated Register Boot
Locke Part #: L0195 MFG Part #: 6458128
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
12" x 8" x 8" Sealed Wye
Locke Part #: L7093 MFG Part #: 8011288
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B &amp; C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
12" x 8" x 8" Wye
Locke Part #: L0245 MFG Part #: 8001288
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
12" x 9" x 9" Wye
Locke Part #: L0263 MFG Part #: 8001299
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
CODY CO INC
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Product Image Not Available 14 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6150 MFG Part #: L6150
CODY CO INC
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
14" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7029 MFG Part #: 1252414
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
14" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0129 MFG Part #: 12514
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
AIR-TITE INC
AIR-TITE INC
AIR-TITE INC
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
14" Damper with Hardware, 26 Gauge
Locke Part #: L1377 MFG Part #: 14" DAMPER W/HW
AIR-TITE INC
14" Ductboard Triangle
Locke Part #: L6103 MFG Part #: 14" DUCT BD TRI
CODY CO INC
14" PVC Air Duct 90° Elbow
Locke Part #: R0444 MFG Part #: L149P
GENERAL PLASTICS
14" PVC Air Duct Start Collar
Locke Part #: R0564 MFG Part #: SC14P
GENERAL PLASTICS
14" Round Sheet Metal Starting Collar
Locke Part #: L0281 MFG Part #: 50014
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
14" Spiral Pipe Coupling
Locke Part #: L7244 MFG Part #: 11814
CODY CO INC
14" Spiral Pipe End Cap
Locke Part #: L7234 MFG Part #: 119S14
CODY CO INC
14" Spiral Pipe Hanger
Locke Part #: L7258 MFG Part #: 07614
CODY CO INC
14" Starting Collar For Ductboard
Locke Part #: L0046 MFG Part #: 55014
CODY CO INC
14" Starting Collar with Damper
Locke Part #: L7054 MFG Part #: 548 14"
CODY CO INC
CODY CO INC
14" x 10" x 10" Wye
Locke Part #: L0208 MFG Part #: 800141010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
14" x 10' PVC Air Duct Pipe
Locke Part #: R0068 MFG Part #: 14 X 10 50 PSI
Belled at One End KROY IND INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
14" x 12" PVC Air Duct Reducer
Locke Part #: R0543 MFG Part #: RC14P
GENERAL PLASTICS
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
14" x 12" Spiral Pipe Reducer
Locke Part #: L7223 MFG Part #: 1201412
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
14" x 12" x 10" Wye
Locke Part #: L0253 MFG Part #: 800141210
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
14" x 12" x 12" PVC Air Duct Wye
Locke Part #: R0541 MFG Part #: Y422P
GENERAL PLASTICS
14" x 12" x 12" Wye
Locke Part #: L0252 MFG Part #: 800141212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
14" x 12" x 8" Wye
Locke Part #: L0254 MFG Part #: 80014128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
14" x 14" x 12" Insulated Register Boot
Locke Part #: L0175 MFG Part #: 645141412
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
14" x 14" x 12" Rect. to Rnd Ceiling Box, 30ga.
Locke Part #: L2428 MFG Part #: 14X14X12 BOX
AIR-TITE INC
14" x 14" x 12" Wye
Locke Part #: L0251 MFG Part #: 800141412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 CODY CO INC
14" x 14" x 14" Furnace Tee
Locke Part #: L1209 MFG Part #: 825141414
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B &amp; C CODY CO INC
14" x 16" x 48" Elbow
Locke Part #: R0548 MFG Part #: P1468
GENERAL PLASTICS
14" x 18" x 60" Elbow
Locke Part #: R0549 MFG Part #: P1480
GENERAL PLASTICS
14" x 18" x 72" Elbow
Locke Part #: R0550 MFG Part #: P1482
GENERAL PLASTICS
14" x 18" x 96" Elbow
Locke Part #: R0579 MFG Part #: P1486
GENERAL PLASTICS
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
CODY CO INC
14" x 4" x 6" Concrete Box
Locke Part #: L0270 MFG Part #: 2514128
CODY CO INC
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar &amp; Register Openings, Flange for snap on rails CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
CODY CO INC
14" x 4" x 8" Concrete Box
Locke Part #: L0271 MFG Part #: 2514148
CODY CO INC
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar &amp; Register Openings CODY CO INC
CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
14" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7008 MFG Part #: 1042614
CODY CO INC
14" x 5' Foil Sleeve R8
Locke Part #: L1969 MFG Part #: 010 R8 14" X 5'
UPC #010 Reinforced sleeves for insulating standard sheet metal pipes., Thick fiberglass insulation for excellent thermal efficiency, Reinforced metalized vapor barrier jacket. Atco
14" x 5' Galv. Pipe, 28 Gauge
Locke Part #: L1648 MFG Part #: SL601428
SOUTHWARK METAL MFG CO
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 &amp; R8 is fabricated with 4 corner tabs CODY CO INC
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 &amp; R8 is fabricated without flange for snap on rails, Body is 4 tall CODY CO INC
CODY CO INC
14" x 8" to 12" x 8" Transition
Locke Part #: L2837 MFG Part #: 17148-128
SOUTHWARK METAL MFG CO
30 GA Galvanized Steel, 1 Flange for Rails CODY CO INC
CODY CO INC
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Quiet Operation: ToughGard duct liner helps absorb equipment and air rush noises over a broad spectrum of sound. Noise is trapped and dissipated within the glass fiber matrix., Thermal Protection: All products offer excellent thermal-insulating properties and lower HVAC operating costs by reducing energy consumption. This saves natural resources and reduces emissions into the atmosphere., Water Repellency: The thermal properties of duct liner help control condensation, which helps improve indoor air quality by reducing unwanted moisture, Low Emitting: Certified by the GREENGUARD Environmental Institute., Low Air Resistance: The smooth ToughGard air stream surface offers low air resistance to deliver efficient HVAC system operation., Resists Microbial Growth: The air stream surface contains an EPA registered antimicrobial agent in order to reduce the potential of microbial growth that may affect this product. The antimicrobial properties are intended to only protect this product., Durable: The strength and resiliency of the ToughGard surface provides outstanding resistance against puncturing, tearing and other damage during fabrication, installation, and periodic system maintenance., Long-lasting and Non-corrosive: Inert fiber glass will not deteriorate or provide sustenance for vermin or rodents, and it will not corrode the sheet metal it insulates., Applicable Standards:, Model Building Codes:, Material Standards:, Fire Safety Standards:, Fire Hazard Classification:, Limited Combustible:, Physical/Chemical Properties:, Operating Limits:, Temperature:, Air Velocity:, ICC, California Title 24, ASTM C1071, Type I, CAN/CGSB-S1.11-92, NFPA 90A, NFPA 90B, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, NFPA 259 CERTAINTEED INSULATION 740377968816
CERTAINTEED INSULATION 740377091156
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
16" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7030 MFG Part #: 1252416
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
16" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L0130 MFG Part #: 12516
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
AIR-TITE INC
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
16" Ductboard Triangle
Locke Part #: L6104 MFG Part #: 16" DUCT BD TRI
CODY CO INC
16" Round Sheet Metal Starting Collar
Locke Part #: L0282 MFG Part #: 50016
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
16" Spiral Pipe Coupling
Locke Part #: L7245 MFG Part #: 11816
CODY CO INC
16" Spiral Pipe End Cap
Locke Part #: L7235 MFG Part #: 119S16
CODY CO INC
16" Starting Collar For Ductboard
Locke Part #: L0054 MFG Part #: 55016
CODY CO INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
16" x 14" Spiral Pipe Reducer
Locke Part #: L7224 MFG Part #: 1201614
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
16" x 14" x 12" Wye
Locke Part #: L0264 MFG Part #: 800161412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
16" x 14" x 14" Wye
Locke Part #: L0256 MFG Part #: 800161414
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
16" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7009 MFG Part #: 1042416
CODY CO INC
16" x 47.5" Thermo-Pan Return Air Panning
Locke Part #: L3610 MFG Part #: T-ST-16x48 16048
No 'oil canning' or duct noise, Air space provides positive R-value, No shop fabrication, user friendly - no cut hands, Stapling as directed results in plenum air seal tighter, Enviro-friendly, Made from recycled products, Moisture treated against dampness, All popular joist size, Will not sustain combustion, Pre-formed headers (regular joists and I-joists) MITEX BUILDING PRODUCTS LLC
16" x 8" to 12" x 8" Transition
Locke Part #: L2830 MFG Part #: 17168-128
SOUTHWARK METAL MFG CO
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
18" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7031 MFG Part #: 1252418
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
18" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0131 MFG Part #: 12518
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
AIR-TITE INC
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
18" Ductboard Triangle
Locke Part #: L6105 MFG Part #: 18" DUCT BD TRI
CODY CO INC
18" Round Sheet Metal Starting Collar
Locke Part #: L0283 MFG Part #: 50018
Sheet Metal Start Collars, Sizes are Embossed on the Collar, Constructed of Galvanized Sheet Metal, Used between PVC duct pipe and sheet metal fittings,, Knock-Out Holes CODY CO INC
18" Spiral Pipe Coupling
Locke Part #: L7246 MFG Part #: 11818
CODY CO INC
18" Spiral Pipe End Cap
Locke Part #: L7236 MFG Part #: 119S18
CODY CO INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
18" x 14" x 14" Wye
Locke Part #: L0255 MFG Part #: 800181414
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
18" x 16" Spiral Pipe Reducer
Locke Part #: L7225 MFG Part #: 1201816
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
18" x 18" x 16" Wye
Locke Part #: L0249 MFG Part #: 800181816
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
18" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7010 MFG Part #: 1042418
CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
19.5" x 47.5" Thermo-Pan Return Air Panning
Locke Part #: L3611 MFG Part #: T-ST-19.5x48 19048
No 'oil canning' or duct noise, Air space provides positive R-value, No shop fabrication, user friendly - no cut hands, Stapling as directed results in plenum air seal tighter, Enviro-friendly, Made from recycled products, Moisture treated against dampness, All popular joist size, Will not sustain combustion, Pre-formed headers (regular joists and I-joists) MITEX BUILDING PRODUCTS LLC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Includes:, 50 L Shaped Foam Spacers ( 2 x 2 x 1 x 48 ), Roll of Double Coated Tape ( 1 x 180 ) THERMO MANUFACTURING
Includes:, 50 L Shaped Foam Spacers ( 2 x 2 x 1 x 48 ), Roll of Double Coated Tape ( 1 x 180 ) THERMO MANUFACTURING
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) CODY CO INC
Product Image Not Available 20 1/4 X 20 1/4 X 6 DUCT BD BX
Locke Part #: L6106 MFG Part #: 20-1/4X20-1/4X6
CODY CO INC
Product Image Not Available 20 X 10 ROUGH-IN RET AIR FRAME
Locke Part #: L6153 MFG Part #: L6153
CODY CO INC
1 Flange on All Four Sides for Easy Attachment, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Available Lined or Unlined- Must Specify the R Value of Liner, Standard Height 30 Unless Otherwise Specified CODY CO INC
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
20" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L0132 MFG Part #: 12520
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
AIR-TITE INC
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
20" Long, 28 Gauge "W" Brace
Locke Part #: L0031 MFG Part #: 071320
CODY CO INC
20" Spiral Pipe Coupling
Locke Part #: L7247 MFG Part #: 11820
CODY CO INC
20" Spiral Pipe End Cap
Locke Part #: L7237 MFG Part #: 119S20
CODY CO INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
20" x 15" x 18" Plenum
Locke Part #: R0465 MFG Part #: P2058
GENERAL PLASTICS
Constructed of Galvanized Metal, Collars are Hemmed CODY CO INC
20" x 18" Spiral Pipe Reducer
Locke Part #: L7226 MFG Part #: 1202018
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
20" x 18" x 18" Plenum
Locke Part #: R0466 MFG Part #: P2088
GENERAL PLASTICS
20" x 20" x 18" Wye
Locke Part #: L0250 MFG Part #: 800202018
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be &gt; B, Dimension B must be = or &gt; C CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
20" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7011 MFG Part #: 1042420
CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Quiet Operation: ToughGard duct liner helps absorb equipment and air rush noises over a broad spectrum of sound. Noise is trapped and dissipated within the glass fiber matrix., Thermal Protection: All products offer excellent thermal-insulating properties and lower HVAC operating costs by reducing energy consumption. This saves natural resources and reduces emissions into the atmosphere., Water Repellency: The thermal properties of duct liner help control condensation, which helps improve indoor air quality by reducing unwanted moisture., Low Emitting: Certified by the GREENGUARD Environmental Institute., Low Air Resistance: The smooth ToughGard air stream surface offers low air resistance to deliver efficient HVAC system operation., Resists Microbial Growth: The air stream surface contains an EPA registered antimicrobial agent in order to reduce the potential of microbial growth that may affect this product. The antimicrobial properties are intended to only protect this product., Durable: The strength and resiliency of the ToughGard surface provides outstanding resistance against puncturing, tearing and other damage during fabrication, installation, and periodic system maintenance., Long-lasting and Non-corrosive: Inert fiber glass will not deteriorate or provide sustenance for vermin or rodents, and it will not corrode the sheet metal it insulates., Applicable Standards:, Model Building Codes: ICC, California Title 24, Material Standards: ASTM C1071, CAN/CGSB-51.11-92, Fire Safety Standards: NFPA 90A, NFPA 90B, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Limited Combustible: NFPA 259 CERTAINTEED INSULATION 740377091255
Quiet Operation: ToughGard duct liner helps absorb equipment and air rush noises over a broad spectrum of sound. Noise is trapped and dissipated within the glass fiber matrix., Thermal Protection: All products offer excellent thermal-insulating properties and lower HVAC operating costs by reducing energy consumption. This saves natural resources and reduces emissions into the atmosphere., Water Repellency: The thermal properties of duct liner help control condensation, which helps improve indoor air quality by reducing unwanted moisture., Low Emitting: Certified by the GREENGUARD Environmental Institute., Low Air Resistance: The smooth ToughGard air stream surface offers low air resistance to deliver efficient HVAC system operation., Resists Microbial Growth: The air stream surface contains an EPA registered antimicrobial agent in order to reduce the potential of microbial growth that may affect this product. The antimicrobial properties are intended to only protect this product., Durable: The strength and resiliency of the ToughGard surface provides outstanding resistance against puncturing, tearing and other damage during fabrication, installation, and periodic system maintenance., Long-lasting and Non-corrosive: Inert fiber glass will not deteriorate or provide sustenance for vermin or rodents, and it will not corrode the sheet metal it insulates., Applicable Standards:, Model Building Codes: ICC, California Title 24, Material Standards: ASTM C1071, CAN/CGSB-51.11-92, Fire Safety Standards: NFPA 90A, NFPA 90B, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Limited Combustible: NFPA 259 CERTAINTEED INSULATION 740377091293
Quiet Operation: ToughGard duct liner helps absorb equipment and air rush noises over a broad spectrum of sound. Noise is trapped and dissipated within the glass fiber matrix., Thermal Protection: All products offer excellent thermal-insulating properties and lower HVAC operating costs by reducing energy consumption. This saves natural resources and reduces emissions into the atmosphere., Water Repellency: The thermal properties of duct liner help control condensation, which helps improve indoor air quality by reducing unwanted moisture., Low Emitting: Certified by the GREENGUARD Environmental Institute., Low Air Resistance: The smooth ToughGard air stream surface offers low air resistance to deliver efficient HVAC system operation., Resists Microbial Growth: The air stream surface contains an EPA registered antimicrobial agent in order to reduce the potential of microbial growth that may affect this product. The antimicrobial properties are intended to only protect this product., Durable: The strength and resiliency of the ToughGard surface provides outstanding resistance against puncturing, tearing and other damage during fabrication, installation, and periodic system maintenance., Long-lasting and Non-corrosive: Inert fiber glass will not deteriorate or provide sustenance for vermin or rodents, and it will not corrode the sheet metal it insulates., Applicable Standards:, Model Building Codes: ICC, California Title 24, Material Standards: ASTM C1071, CAN/CGSB-51.11-92, Fire Safety Standards: NFPA 90A, NFPA 90B, Fire Hazard Classification:, UL 723, ASTM E84, NFPA 255, CAN/ULC-S102, Max. Flame Spread Index: 25, Max Smoke Developed Index: 50, Limited Combustible: NFPA 259 CERTAINTEED INSULATION 740377091279
Constructed of Galvanized Metal, Stamped Stitch Weld Seam, Non Returnable CODY CO INC
22" Spiral Pipe Coupling
Locke Part #: L7248 MFG Part #: 11822
CODY CO INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
22" x 20" Spiral Pipe Reducer
Locke Part #: L7227 MFG Part #: 1202220
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
22" x 24" Spiral Pipe Reducer
Locke Part #: L7228 MFG Part #: 1202422
Designed to fit the diameter combination needed from 3 to 50 ., Can be concentric or eccentric. CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Product Image Not Available 225 10X6X6 END BOOT W/FLANGE
Locke Part #: L7482 MFG Part #: 2256106
CODY CO INC
Product Image Not Available 225 12X6X7 END BOOT W/FLANGE
Locke Part #: L7483 MFG Part #: 2256127
CODY CO INC
Product Image Not Available 225 14X6X8 END BOOT W/ FLANGE
Locke Part #: L7484 MFG Part #: 2256148
CODY CO INC
Product Image Not Available 225 14X8X9 END BOOT W/FLANGE
Locke Part #: L7485 MFG Part #: 2258149
CODY CO INC
Product Image Not Available 225 8X4X5 END BOOT W/FLANGE
Locke Part #: L7481 MFG Part #: 225485
CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped CODY CO INC
Product Image Not Available 235 10X6X6 90DEG BOOT W/FLANGE
Locke Part #: L7487 MFG Part #: 2356106
CODY CO INC
Product Image Not Available 235 12X6X7 90DEG BOOT W/F;ANGE
Locke Part #: L7488 MFG Part #: 325 12X6X7
CODY CO INC
Product Image Not Available 235 14X6X8 90DEG BOOT W/FLANGE
Locke Part #: L7489 MFG Part #: 235 14X6X8
CODY CO INC
Product Image Not Available 235 14X8X9 90DEG BOOT S/FLANGE
Locke Part #: L7490 MFG Part #: 235 14X8X9
CODY CO INC
Product Image Not Available 235 8X4X5 90 DEG BOO W/FLANGE
Locke Part #: L7486 MFG Part #: 235 8X4X5
CODY CO INC
Product Image Not Available 237 4X10X6 ANGLE BOOT W/BRACE
Locke Part #: L0140 MFG Part #: 2374106
CODY CO INC
Product Image Not Available 237 4X12X7 ANGLE BOOT W/BRACE
Locke Part #: L0141 MFG Part #: 2374127
CODY CO INC
Product Image Not Available 24 X 12 ROUGH-IN RET AIR FRAME
Locke Part #: L6152 MFG Part #: L6152
CODY CO INC
Product Image Not Available 24 X 24 X 6 DUCT BOARD BOX
Locke Part #: L6108 MFG Part #: L6108
CODY CO INC
24" Spiral Pipe Coupling
Locke Part #: L7249 MFG Part #: 11824
CODY CO INC
Available in Bonderized (Paint Grip), 304L and 316L Stainless Steel, Aluminum, PVC Coated, Corrugated for Extra Strength, Standard spiral pipe length is 10', SPIDA and SMACNA standards for Max. 10" W.C. Static Positive Pressure METRO MECHANICAL SUPPLY
No 'oil canning' or duct noise, Air space provides positive R-value, No shop fabrication, user friendly - no cut hands, Stapling as directed results in plenum air seal tighter, Enviro-friendly, Made from recycled products, Moisture treated against dampness, All popular joist size, Will not sustain combustion, Pre-formed headers (regular joists and I-joists) MITEX BUILDING PRODUCTS LLC
Product Image Not Available 25 X 16 ROUGH-IN RET AIR FRAME
Locke Part #: L6154 MFG Part #: L6154
CODY CO INC
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal CODY CO INC
Can be used on Register Boxes, Boots and Insulated boxes., Snaps to all fours sides so box can be Installed to run in either direction CODY CO INC
3" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0120 MFG Part #: 1253
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
3" x 10' RD Conductor Pipe, 28 Gauge
Locke Part #: L0463 MFG Part #: 1103
Plain round galvanized pipe, Constructed of 30 GA or 28 GA Galvanized Metal CODY CO INC
3" x 3" x 3" Furnace Tee
Locke Part #: L1200 MFG Part #: 825333
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B &amp; C CODY CO INC
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 &amp; 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . CODY CO INC
Product Image Not Available 3'x10' Flat Sheet Metal 24ga.
Locke Part #: L2601 MFG Part #: G24-36-120
STEEL MFG &WAREHOUSE CO
Product Image Not Available 3'x10' Flat Sheet Metal 26ga.
Locke Part #: L2605 MFG Part #: G26-36-120
STEEL MFG &WAREHOUSE CO
Product Image Not Available 3'x10' Flat Sheet Metal 28ga.
Locke Part #: L2615 MFG Part #: G28-36-120
STEEL MFG &WAREHOUSE CO
Product Image Not Available 3'x8' Flat Sheet Metal 24ga.
Locke Part #: L2600 MFG Part #: G24-36-96
STEEL MFG &WAREHOUSE CO
Product Image Not Available 3'x8' Flat Sheet Metal 26ga.
Locke Part #: L2604 MFG Part #: G26-36-96
STEEL MFG &WAREHOUSE CO
Product Image Not Available 3'x8' Flat Sheet Metal 28ga.
Locke Part #: L2608 MFG Part #: G28-36-96
STEEL MFG &WAREHOUSE CO
3/4" Self Adhesive Hanger
Locke Part #: L1331 MFG Part #: LF-SP-0750
CAIN MFG. CO INC
Product Image Not Available 30 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6151 MFG Part #: L6151
CODY CO INC
4" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7021 MFG Part #: 125264
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
4" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7012 MFG Part #: 125284
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
4" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0121 MFG Part #: 1254
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 CODY CO INC
AIR-TITE INC
Features a built-in ring (also available with sealant), Collars are embossed with size for easy identification, Constructed with knock-out holes for dampers, Unassembled; Button lock connection for easy assembly, can be used for 1 (R4) or 1-1/2 (R6) ductboard CODY CO INC
AIR-TITE INC
4" Single Wall Cap
Locke Part #: L0015 MFG Part #: 9504
Galvanized Steel Formed Material, Options Available: Screen CODY CO INC
4" Single Wall Roof Cap
Locke Part #: L0023 MFG Part #: 9304
CODY CO INC
4" Start Collar
Locke Part #: R0558 MFG Part #: SC40P
GENERAL PLASTICS
4" x 10" x 4" Box
Locke Part #: R0452 MFG Part #: B4104
GENERAL PLASTICS
4" x 10" x 6" Box
Locke Part #: R0453 MFG Part #: B4106
GENERAL PLASTICS
30 GA Galvanized Steel, 1 Flange for Rails CODY CO INC
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included)