Equipment Categories

Loading ...

Loading ...

Search in: Equipment Category

Range Inches of Water: 0 - 1.0, Minor Divisions: 0.02 Magnehelic gage, for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit the needs precisely, Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential., The design resists shock, vibration and over-pressures., No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too., It checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment. DWYER INSTRUMENTS
L5570.jpg1" IPS Coupling
Locke Part #: L5571MFG Part #: 10005381 Compare
GEORG FISCHER CENTRAL PLASTICS
L5565.jpg1" IPS Elbow
Locke Part #: L5566MFG Part #: 10005361 Compare
GEORG FISCHER CENTRAL PLASTICS
L5590.jpg1" IPS End Cap
Locke Part #: L5591MFG Part #: 10005372 Compare
GEORG FISCHER CENTRAL PLASTICS
L5596.jpg1" IPS Outlet Size, 2" IPS Base Size Saddle
Locke Part #: L5596MFG Part #: 10004980 Compare
GEORG FISCHER CENTRAL PLASTICS
Product Image Not Available1" IPS Tee
Locke Part #: L5576MFG Part #: 10005410 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg1" IPS x 3/4" IPS
Locke Part #: L5580MFG Part #: 10005392 Compare
GEORG FISCHER CENTRAL PLASTICS
L5527.jpg1" x 12’ Closed Loop Hose Kit
Locke Part #: L5527MFG Part #: HK-1-12 Compare
For use with Qt Geothermal Flow Centers (L5529) B&D MFG INC
Includes:, motor, housing, & blower wheel ADVANCED DISTRIBUTOR PRODUCTS
Product Image Not Available1/4" FPT Gauge Adapter W/ 1/8" Heavy Duty Probe
Locke Part #: L5523MFG Part #: 8603-027 Compare
BARD MANUFACTURING COMPANY INC
Size: 30", CFM-High: 6000, CFM-Med: 5500, CFM-Low: 4800, Amps High: 2.4, Motor HP: 1/4 Motor:, 1/4 HP, 3 Speed, 120V, 1 Phase, Ball-Bearing, Open Ventilated, Permanently Lubricated, Permanent Split Capacitor., Switch:, Pull Chain, Cord:, SJT Type 3 Conductor, 9 Long, Guard:, Coated Steel with Retaining Clips, Pole:, Adjusts center of fan from 43 to 60, Meets Federal OSHA Requirements / 1 Year LIMITED WARRANTY. TPI Corporation
Voltage: 208/240 V, 60 Hz, Speed: 3 ADVANCED DISTRIBUTOR PRODUCTS
L4970.jpg1/70HP,115V Evaporative Cooler Pump
Locke Part #: L4970MFG Part #: 540005 Compare
Description Ext.: RAABR12L125 RETRO LITTLE GIANT
CPL-coils-black.jpg1 1/4 X 20' CenFuse 160 PSI
Locke Part #: L5562MFG Part #: FUSE16001250020 Compare
Color: BLK, Size: 1 1/4, Diameter: 1-1/4", ID: 1.358", OD: 1.660", Wall: .151", Weight/feet: .306, Straight Lengths: 20’ Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. Centennial Plast
Product Image Not Available1 1/4X1 1/4X1" SOCKET FUSION TEE
Locke Part #: L5588MFG Part #: 10009819 Compare
GEORG FISCHER CENTRAL PLASTICS
4X6 Loop Image.jpg1 X 410' SDR 11 EARTH LOOP
Locke Part #: L5552MFG Part #: LOOP160001000410+FC0100 Compare
Color: BLK, Size: 1, Diameter: 1", Coil Lengths in ft: 410’, Standard Stock SDR 11: 410’ (205’ x 205’) Centennial Bullet U-Bend Fittings accommodate pipe in 1" and 3/4" diameters and are the narrowest U-bend fiitings on the market today. The smaller diameter of these fittings reduce installation costs in two significant ways:, They allow for a narrower bore hole which requires less grout., The narrower bore holes require less annular space resulting in more efficient drilling.In addition, Centennial Bullet U-Bend fittings allow for the easy insertion of Centennial Cenfuse Geothermal pipe into the bore hole:, Fitting vents allow material to be displaced as the bullet fitting is inserted into the bore hole., Knockouts are provided for directional/horizontal boring applications. Centennial Plast
4X6 Loop Image.jpg1 X 510' SDR 11 EARTH LOOP
Locke Part #: L5553MFG Part #: LOOP16001000510+FC0100 Compare
Color: BLK, Size: 1, Diameter: 1", Coil Lengths in ft: 510’, Standard Stock SDR 11: 510’ (255’ x 255’) Centennial Bullet U-Bend Fittings accommodate pipe in 1" and 3/4" diameters and are the narrowest U-bend fiitings on the market today. The smaller diameter of these fittings reduce installation costs in two significant ways:, They allow for a narrower bore hole which requires less grout., The narrower bore holes require less annular space resulting in more efficient drilling.In addition, Centennial Bullet U-Bend fittings allow for the easy insertion of Centennial Cenfuse Geothermal pipe into the bore hole:, Fitting vents allow material to be displaced as the bullet fitting is inserted into the bore hole., Knockouts are provided for directional/horizontal boring applications. Centennial Plast
L5570.jpg1-1/2" IPS Coupling
Locke Part #: L5573MFG Part #: 10005383 Compare
GEORG FISCHER CENTRAL PLASTICS
L5565.jpg1-1/2" IPS Elbow
Locke Part #: L5568MFG Part #: 10005365 Compare
GEORG FISCHER CENTRAL PLASTICS
L5590.jpg1-1/2" IPS End Cap
Locke Part #: L5593MFG Part #: 10005374 Compare
GEORG FISCHER CENTRAL PLASTICS
Product Image Not Available1-1/2" IPS Tee
Locke Part #: L5578MFG Part #: 10005413 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg1-1/2" IPS x 1" IPS
Locke Part #: L5583MFG Part #: 10005396 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg1-1/2" IPS x 1-1/4" IPS
Locke Part #: L5584MFG Part #: 10005397 Compare
GEORG FISCHER CENTRAL PLASTICS
L5530.jpg1-1/4" Inlet x (3) 3/4" Outlets
Locke Part #: L5530MFG Part #: SK644K02 Compare
B&D MFG INC
L5530.jpg1-1/4" Inlet x (4) 3/4" Outlets
Locke Part #: L5531MFG Part #: SK644K03 Compare
B&D MFG INC
L5530.jpg1-1/4" Inlet x (5) 3/4" Outlets
Locke Part #: L5532MFG Part #: SK644K04 Compare
B&D MFG INC
L5530.jpg1-1/4" Inlet x (6) 3/4" Outlets
Locke Part #: L5533MFG Part #: SK644K05 Compare
B&D MFG INC
L5570.jpg1-1/4" IPS Coupling
Locke Part #: L5572MFG Part #: 10005382 Compare
GEORG FISCHER CENTRAL PLASTICS
L5565.jpg1-1/4" IPS Elbow
Locke Part #: L5567MFG Part #: 10005363 Compare
GEORG FISCHER CENTRAL PLASTICS
L5590.jpg1-1/4" IPS End Cap
Locke Part #: L5592MFG Part #: 10005373 Compare
GEORG FISCHER CENTRAL PLASTICS
Product Image Not Available1-1/4" IPS Tee
Locke Part #: L5577MFG Part #: 10005411 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg1-1/4" IPS x 1" IPS
Locke Part #: L5582MFG Part #: 10005395 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg1-1/4" IPS x 3/4" IPS
Locke Part #: L5581MFG Part #: 10005394 Compare
GEORG FISCHER CENTRAL PLASTICS
Fusion Male Adapter.jpg1-1/4" x 1" Fusion Male Adapter
Locke Part #: L5541MFG Part #: SPMA65 Compare
B&D MFG INC
Fusion Male Adapter.jpg1-1/4" x 1-1/4" Fusion Male Adapter
Locke Part #: L5540MFG Part #: SPMA66 Compare
B&D MFG INC
L5575.jpg1-1/4" x 1-1/4" x 3/4" Fusion Tee
Locke Part #: L5546MFG Part #: SPT664 Compare
B&D MFG INC
L5575.jpg1-1/4" x 3/4" x 3/4" FusionTee
Locke Part #: L5545MFG Part #: SPT644 Compare
B&D MFG INC
Product Image Not Available1-7/8" S-Hook - 28 per pkg.
Locke Part #: L5681MFG Part #: JL-0798-SH Compare
SCHWANK USA INC
Product Image Not Available1.5-3 Ton 410A A/C TXV for S Series Air Handler
Locke Part #: L3726MFG Part #: 65026401 Compare
ADVANCED DISTRIBUTOR PRODUCTS
Voltage: 208-240, kw: 10 ARMSTRONG AIR
Voltage: 208-240, kw: 10 ARMSTRONG AIR
Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800, Line voltage data - 60 hz: 208/230V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge. ALLIED AIR COMMERCIAL
Volt: 208/230, Tonnage: 10 ALLIED AIR COMMERCIAL
L4398.jpg10 Ton 3PH 208/230V Electric Packaged Units
Locke Part #: L4400MFG Part #: V9153 Compare
Phase: 3, Volt: 208/230, Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007., All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Optional Factory or Field Installed, Helix wound nichrome elements, Individual element limit controls, Wiring harness, Unit fuse block is furnished as standard, Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity., Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections., Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Base rails have rigging holes., Three sides of the base rail have forklift slots., Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building., Units are shipped in downflow (vertical) configuration, can be field converted to horizontal airflow with optional Horizontal Discharge Kit., All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation., Unit base is fully insulated. The insulation also serves as an air seal to the roof curb, eliminating the need to add a seal during installation. ALLIED AIR COMMERCIAL
L4398.jpg10 Ton 3PH 460V Electric Packaged Units
Locke Part #: L4401MFG Part #: V9151 Compare
Phase: 3, Volt: 460, Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007., All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Optional Factory or Field Installed, Helix wound nichrome elements, Individual element limit controls, Wiring harness, Unit fuse block is furnished as standard, Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge., Copper tube Coil construction, enhanced rippled edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Evaporator Coil Cross row circuiting with rifled copper tubing optimizes both sensible and latent cooling capacity., Single formed Condenser coil., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections., Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount., Outdoor Coil Fans PVC coated fan guard furnished., Cabinet, Heavy-gauge steel panels and full perimeter heavy-gauge galvanized steel base rail provides structural integrity for transportation, handling, and installation., Base rails have rigging holes., Three sides of the base rail have forklift slots., Raised edges around duct and power entry openings in the bottom of the unit provide additional protection against water entering the building., Units are shipped in downflow (vertical) configuration, can be field converted to horizontal airflow with optional Horizontal Discharge Kit., All panels adjacent to conditioned air are fully insulated with nonhygroscopic fiberglass insulation., Unit base is fully insulated. The insulation also serves as an air seal to the roof curb, eliminating the need to add a seal during installation. ALLIED AIR COMMERCIAL
L4390.jpg10 Ton 460V 3PH Gas/Electric Packaged Units
Locke Part #: L4393MFG Part #: V9176 Compare
Tonnage: 10, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 670, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 7800, Line voltage data - 60 hz: 460V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge. ALLIED AIR COMMERCIAL
L4352.jpg10 Ton 460V TSA Split System Air Conditioners
Locke Part #: L4356MFG Part #: 45W09 Compare
Volt: 460, Tonnage: 10 ALLIED AIR COMMERCIAL
L5690.jpg100,000 BTU
Locke Part #: L5693MFG Part #: EC-0100-NG / IL-0100-NG Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented SCHWANK USA INC
L5690.jpg100,000 BTU
Locke Part #: L5694MFG Part #: EC-0100-LP Compare
Safe, reliable, comfortable heat in: Industrial plants, Warehouses, Arenas, Transportation terminals, Loading docks, Aircraft hangars, Automotive service shops & more. Schwank Effect Tile has a unique patented SCHWANK USA INC
SEP100AN.jpg100,000 BTU Commercial Unit Heater
Locke Part #: L6201MFG Part #: SEP100AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 20-3/16 x 31-5/16, Nominal Gas Heat Input: 100,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 4, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 1900 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod. ADVANCED DISTRIBUTOR PRODUCTS
Product Image Not Available10009821 SF RED TEE,1.25 ,IPS,1,IPS,1,IPS
Locke Part #: L5554MFG Part #: 10009821 Compare
GEORG FISCHER CENTRAL PLASTICS
Cabinet Color: Embossed, Slab Number: 30, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 11.0 x Pan 13.0 x Pan 19.5, Nominal MBTUH: 24, Slab: Copper, Cabinet Upper Notch: Uncased Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
RADIANT TUBE HEATERS.jpg110,000 BTU
Locke Part #: L5672MFG Part #: JS-S110-AN Compare
Capacity: 110,000 BTU SCHWANK USA INC
RADIANT TUBE HEATERS.jpg110,000 BTU
Locke Part #: L5687MFG Part #: JS0561-XB Compare
SCHWANK USA INC
SEP100AN.jpg115,000 BTU Commercial Unit Heater
Locke Part #: L6203MFG Part #: SEP115AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 20-3/16 x 31-5/16, Nominal Gas Heat Input: 115,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 4, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 1900 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod. ADVANCED DISTRIBUTOR PRODUCTS
EER: 8.8, Capacity Cooling BTU/h: 11600, Air Flow (High) CFM: 235, Moisture Removal Pts/hr: 6 3-IN -1 SYSTEM: Air conditioner, dehumidifier and fan, Dual hoses for closed loop cooling and exhaust functions for up to 40% faster, more effective cooling, Self evaporative condensate system means no bucket to empty, Condensate overflow protection- if tank should become full, the unit will automatically shut off and unit can be drained through the water outlet drain, 24 hour timer, 3 fan speeds, Plugs into standard 115 volt outlet, Washable, antimicrobial air filter, Auto restart after power outage, Window kit fits both vertical and horizontal window openings, All installation accessories included, Ideal for these applications:, Workshops and garages, Home offices, Dorm rooms, Bedrooms, attics and basements, Sunrooms/ enclosed patios, Supplemental or emergency cooling anywhere, Performance Ratings, Locke Code, L4047, Capacity Cooling BTU/h, 11600, EER, 8.8, Moisture Removal Pts/hr, Air Flow (High) CFM, 235, Electrical Characteristics ( 60 Hertz ), Volts Rated, 115, Cooling Amps, 11.5, Refrigerant Type, R410a Friedrich Air Cond
L7334.jpg12,000 BTU HP Outdoor Unit
Locke Part #: L7343MFG Part #: AOU12RLFC SNGL ZN CC/ARU Compare
Refrigerant: R410A, Cooling: 12,000 BTU/h, SEER: 21, Heating: 16,000 BTU/h, Voltage/ Frequency/Phase: 208-230/60/1 Standard Features:, Seven year compressor warranty, Five year parts warranty, Energy Star Qualified, Auto Restart / Reset, Refrigerant R410A, Quiet Mode, Sleep Timer, Built in Low Ambient, Use with compact ceiling Cassettes or slim ducts FUJITSU GENERAL AMERICA, INC
L7368.jpg12,000 BTU Slim Duct
Locke Part #: L7369MFG Part #: ARU12RLF Compare
Width: 27-9/16", Depth: 24-13/32", Height: 7-25/32", Refrigerant: R410A, Cooling BTU/h: 12,000, Heating BTU/h: 13,500, Volts/Hz/Ph: 208-230/60/1 Adaptable when ceiling cavity is small and there is no slope for drain., Air intake direction can be selected to match the installation site., Ductless Technology for Energy Efficiency, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses, typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption., Standard Features:, Dry Mode, Weekly Timer, Sleep Timer*, 24-Hour Timer*, Minimum Heat Mode*, Auto Mode, Quiet Mode, Auto Restart/ Reset, Auto Changeover, Long Piping Length, Condensate Pump, Fresh Air Intake, *Available only with optional FUJITSU GENERAL AMERICA, INC
L7324.jpg12,000 BTU Wall Mount Indoor Unit
Locke Part #: L7325MFG Part #: ASU12RLF1 Compare
Refrigerant: R410A, SEER: 22, Nominal: 16,000 BTU/h, Min - Max: 3,100- 19,100, Voltage/ Frequency/Phase: 208-230/60/1 Standard Features:, Wireless Remote Control, Sleep Timer, 24-Hour Timer, Dry Modevv, Auto Louver: Up/Down+, Auto Louver: 4-Way^, Auto Mode, Quiet Mode, Auto Restart/Reset, Auto Changeover, Economy Mode, Apple Catechin Filter, Ion Deodorizing Filter, Minimum Heat, These models are single zone 9, 12, 18 and 24,000 BTU ductless heat pumps, meaning they provide cooling in the summer and heat in the winter for year-round comfort., ENERGY STAR Qualified:, These four models meet strict energy efficiency guidelines set forth by the U.S. government, meaning they cut down on utility bills and may qualify for local state and utility company rebates of up to $1,200., Ductless Technology for Energy Efficiency:, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption., Part of the Halcyon Hybrid Flex Inverter (HFI) Line:, As part of the HFI line of components, indoor units ASU9RLF, ASU12RLF. ASU18RLF, and ASU24RLF are compatible with larger multizone outdoor units of the HFI line, meaning less SKUs to stock for distributors FUJITSU GENERAL AMERICA, INC
L7345.jpg12,000 BTU Wall Mount Indoor Unit
Locke Part #: L7347MFG Part #: ASU12RL2 Compare
Refrigerant: R410A, Cooling: 32-115ºf, SEER: 16, Heating: 17-75ºf, Volts/Hz/Ph: 115/60/1 Standard Features:, Wireless Remote Control, Sleep Timer, Coil Dry Mode, Dry Mode, Auto Louver: 4-Way, Auto Mode, Quiet Mode, Economy Mode, Auto Restart/Reset, Auto Changeover, Low Ambient, Cold Prevention, Minimum Heat, Basic Third Party Interface*, Ductless Technology for Energy Efficiency, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption. FUJITSU GENERAL AMERICA, INC
L7324.jpg12,000 BTU Wall Mount Outdoor Unit
Locke Part #: L7336MFG Part #: AOU12RLFW1 Compare
Refrigerant: R410A, SEER: 22, Nominal: 16,000 BTU/h, Min - Max: 3,100- 19,100, Voltage/ Frequency/Phase: 208-230/60/1 Standard Features:, Wireless Remote Control, Sleep Timer, 24-Hour Timer, Dry Modevv, Auto Louver: Up/Down+, Auto Louver: 4-Way^, Auto Mode, Quiet Mode, Auto Restart/Reset, Auto Changeover, Economy Mode, Apple Catechin Filter, Ion Deodorizing Filter, Minimum Heat, These models are single zone 9, 12, 18 and 24,000 BTU ductless heat pumps, meaning they provide cooling in the summer and heat in the winter for year-round comfort., ENERGY STAR Qualified:, These four models meet strict energy efficiency guidelines set forth by the U.S. government, meaning they cut down on utility bills and may qualify for local state and utility company rebates of up to $1,200., Ductless Technology for Energy Efficiency:, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption., Part of the Halcyon Hybrid Flex Inverter (HFI) Line:, As part of the HFI line of components, indoor units ASU9RLF, ASU12RLF. ASU18RLF, and ASU24RLF are compatible with larger multizone outdoor units of the HFI line, meaning less SKUs to stock for distributors FUJITSU GENERAL AMERICA, INC
L7345.jpg12,000 BTU Wall Mount Outdoor Unit
Locke Part #: L7348MFG Part #: AOU12RL2 Compare
Refrigerant: R410A, Cooling: 32-115ºf, SEER: 16, Heating: 17-75ºf, Volts/Hz/Ph: 115/60/1 Standard Features:, Wireless Remote Control, Sleep Timer, Coil Dry Mode, Dry Mode, Auto Louver: 4-Way, Auto Mode, Quiet Mode, Economy Mode, Auto Restart/Reset, Auto Changeover, Low Ambient, Cold Prevention, Minimum Heat, Basic Third Party Interface*, Ductless Technology for Energy Efficiency, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption. FUJITSU GENERAL AMERICA, INC
Swing louvers (up/down), Auto-restart, Auto-shut flaps, Washable, reusable air filters, Low Ambient operation, Removable front grille, Auto hang over, 115 volts, Indoor Unit 32-1/8W x 11H x 7D, Outdoor Unit 30-3/4W x 20-7/8H x 9-7/8D, Wireless Remote Control:, 24 hour timer, Sleeper timer, Auto/cool/dry/fan modes, 3 fan speeds plus auto-fan, 4 different transmitter codes, Secured remote control holder Friedrich Air Cond
Tonnage: 12.5, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 3, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/2hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 830, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 8800, Line voltage data - 60 hz: 208/230V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge. ALLIED AIR COMMERCIAL
L4390.jpg12.5 Ton 460V 3PH Gas/Electric Packaged Units
Locke Part #: L4480MFG Part #: V9196 Compare
Tonnage: 12.5, Outdoor Coil Net Face Area Sq. Ft.: 28, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 3, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (2) 1/2hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 830, Outdoor Fans Diameter in.- No. of Blades: (2) 24, Outdoor Fans Total Air Volume - CFM: 8800, Line voltage data - 60 hz: 460V 3PH, Indoor Blower & Drive Nominal Motor HP: 2 hp, 3 hp, 5 hp, Indoor Blower & Drive Wheel Nominal Diameter x Width - in.: 15 x 15 Standard Features, Aluminized Steel Heat Exchanger With Inshot Burners - Life cycle tested., R-410A Refrigerant - Environmentally friendly, High Pressure Switches - Protect compressor., Scroll Compressors - Single speed scroll compressors are furnished on all models., Isolated Compressor Compartment - Allows performance check during normal compressor operation without disrupting airflow., Thermostatic Expansion Valves Provide peak cooling performance across the entire application range., MERV 8 or MERV 13 Filters - Available as field installed option, provide an enhanced level of indoor air quality, and can help the building qualify for additional LEED credits., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Freezestats Protect the evaporator coil from damaging ice build-up due to conditions such as low/no airflow, or low refrigerant charge. ALLIED AIR COMMERCIAL
L4025.jpg12200/12000 Cooling BTU/h Room Air Conditioners
Locke Part #: L4025MFG Part #: SS12N30C Compare
EER: 10.0 / 10.2, Capacity Cooling BTU/h: 12200/12000, Moisture Removal Pt/ h: 3.5, Air Flow (High) CFM: 325 Top-of-the-line commercial grade quality featuring easy-to-use manual controls., AHAM certified performance, High efficiency Energy Star qualified models, Money Saver setting saves energy by cycling the fan with the compressor, Four cooling speeds, one fan only setting, Ultra quiet operation, Easy to clean, removable filter with antimicrobial treatment for protection against fungal and bacterial growth, Blackout masonite wings (semi permant side curtains), Eight-way air flow control, Fresh air intake and stale air exhaust vents, Performance Ratings, Locke Code, L4025, L4027, L4028, Capacity Cooling BTU/h, 12200/12000, 17800/17600, 23500/23000, EER, 10.0 / 10.2, 10.0 / 10.0, 9.4 / 9.4, Moisture Removal Pt/ h, 3.5, 4.4, 7.0, Air Flow (High) CFM, 325, 400, 490, Electrical Characteristics ( 60 Hertz ), Volts Rated, 230/208, 230/208, Cooling Amps, 5.4/5.8, 8.1/8.7, 11.2/12.1, Cooling Watts, 1220/1176, 1780/1760, 2479/2421 Friedrich Air Cond
FOAN125.jpg125,000 BTU Separated Combustion Unit Heater
Locke Part #: L6702MFG Part #: FOAN125 NAT Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 21.0 x 36.5 x 32.375, Nominal Gas Heat Input: 125,000, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.7, Motor RPMs: 1075, Air Volume (CFM): 2955 Perfect for light commercial and greenhouse applications, Introduces clean combustible outside air when required., Wiring junction box is located outside of unit, Ideal for hard-to-heat applications where excessive dust, dirt, humidity, or negative pressure is a concern., Heating capacities from 45,000 300,000 BTUH, Up to 82% thermal efficiency., Compact cabinet design on 45,000 75,000 BTUH models., Hinged door allows easy access to components., Sidewall venting eliminates roof penetrations., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., Tubular heat exchangers made of aluminized steel., Power exhaust system allows horizontal venting to 25 ft., Direct drive propeller fans are dynamically balanced for quiet and smooth opera. ADVANCED DISTRIBUTOR PRODUCTS
EER: 8.9/8.9 ., Capacity Cooling BTU/h: 12500/12000, Air Flow (High) CFM: 280, Capacity Heating BTU/h: -, Moisture Removal Pt/h: 3.3 A perfect fit for Fedders A&B sleeves., Programmable cooling or heat/cool models with easy-to-use manual controls. Mounts flush with the exterior wall., AHAM certified performance, Manual control cooling plus heat pump or electric heat models, Chassis and sleeve sold separately to accommodate new construction and old unit replacement, Ultra quiet operation, Three speed fan, Efficient rotary compressor, Easy to clean, removable filter with antimicrobial treatment for protection against fungal and bacterial growth, Residential/Commercial application, The most energy efficient solid-side air conditioners, Exact fit for Fedders sleeves. Measures 27"W x 16-3/4" H, Ultra quiet operation, Three-speed fan, Mounts flush with the exterior wall, Magna 1 copper coils, Efficient rotary compressor, Easy-to-reach, top mount controls, Easy-to-clean filter with antimicrobial treatment for protection against fungal and bacterial growth. Friedrich Air Cond
EER: 8.9/8.7, Capacity Cooling BTU/h: 12500/12300, Air Flow (High) CFM: 290, Capacity Heating BTU/h: 11000/9100, Moisture Removal Pt/h: 2.9 A perfect fit for Fedders A&B sleeves., Programmable cooling or heat/cool models with easy-to-use manual controls. Mounts flush with the exterior wall., AHAM certified performance, Manual control cooling plus heat pump or electric heat models, Chassis and sleeve sold separately to accommodate new construction and old unit replacement, Ultra quiet operation, Three speed fan, Efficient rotary compressor, Easy to clean, removable filter with antimicrobial treatment for protection against fungal and bacterial growth, Residential/Commercial application, The most energy efficient solid-side air conditioners, Exact fit for Fedders sleeves. Measures 27"W x 16-3/4" H, Ultra quiet operation, Three-speed fan, Mounts flush with the exterior wall, Magna 1 copper coils, Efficient rotary compressor, Easy-to-reach, top mount controls, Easy-to-clean filter with antimicrobial treatment for protection against fungal and bacterial growth. Friedrich Air Cond
Cabinet Color: Embossed, Slab Number: 32, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 13.0 x Pan 14.0 x Pan 19.5, Nominal MBTUH: 30, Slab: Copper, Cabinet Upper Notch: Uncased Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
RADIANT TUBE HEATERS.jpg130,000 BTU
Locke Part #: L5673MFG Part #: JS-S130-AN Compare
Capacity: 130,000 BTU SCHWANK USA INC
RADIANT TUBE HEATERS.jpg130,000 BTU
Locke Part #: L5688MFG Part #: JS-0563-XB Compare
SCHWANK USA INC
Product Image Not Available13ACD042 3.5TON R-22 DRY CHARGE SYSTEM COMPONENT
Locke Part #: K8104MFG Part #: 12X77 PD1021 Compare
ARMSTRONG AIR
Product Image Not Available13ACD048 4 TON R-22 DRY CHARGE SYSTEM COMPONENT
Locke Part #: K8105MFG Part #: 12X78 PD1021 Compare
ARMSTRONG AIR
Height: 14" ALLIED AIR COMMERCIAL
ACURB832 Roof Curbe.jpg14" High Roof Curb for LRP/PR/PRP 024-036 Unit
Locke Part #: L5389MFG Part #: 11U78 Compare
Dimension A: 37-1/2, Dimension C: 34-1/2, Dimension D: 33-3/4, Dimension E: 12, Used With: 2 Thru 3 Ton Models, Dimension - B: 37, Dimension F: 14-1/2, Dimension G: 18-3/4, Dimension H: 16-1/4, Dimension I: 15-1/2, Dimension J: 20 ARMSTRONG AIR
ACURB833 Roof Curbe.jpg14" High Roof Curb for LRP/PR/PRP 042-060 Unit
Locke Part #: L5390MFG Part #: 14V69 Compare
Dimension A: 45-1/2, Dimension C: 42-3/8, Dimension D: 33-1/10, Dimension E: 12, Used With: 3.5 Thru 5 Ton Models, Dimension - B: 36-1/4, Dimension F: 20, Dimension G: 21-3/10, Dimension H: 21-8/10, Dimension I: 15-1/2, Dimension J: 20 ARMSTRONG AIR
Color: Black/White/Red, Standard Packaging: 125 Feet, Approximate Net Weight (lbs/1000 ft): 141, Outside Diameter Over Armor (in): 0.435, Allowable Ampacity (Amps) 60°C / 75°C / 90°C: - / 15 / 15, Outside Diameter Over Jacket (in): 0.535, Conductors - Green Ground: 14 AWG, Conductors AWG: 14/3, Conductors Type: Solid, PVC Thickness (in): 0.050 THHN/THWN-2 Copper Conductor, Separator Tape, Interlocked Aluminum Armor, Black PVC Jacket, Applications:, Permitted use for services, feeders, and branch circuits in industrial, commercial, and multi-residential buildings, Acceptable for power, lighting, control, and signal circuits, Utilized for indoor or outdoor applications, and allowable for concealed or exposed systems, Permitted in wet locations per NEC 330.10(A)(11)(a), Permitted for direct burial in the earth or embedded in concrete per NEC 330.12(2)(a), Acceptable for direct burial where identified for such use, Allowable in assembly occupancies (NEC 518.4), Permissible in theaters, audience areas of motion pictures, television studios, and similar locations (NEC 520.5), Permitted as aerial cable on a messenger and allowable installations in approved raceways and cable trays (NEC 392), Suitable for installation under raised floors for IT equipment (NEC 645.5) and permitted in Class I Div. 2, Class II Div. 2, and Class III Div. 1 Hazardous Locations, Listed for use in UL 1, 2, and 3 Hour Through-Penetration Firestop Systems, Construction:, Color Method:, 120/280Y: 2Cdr: Black/White; 3Cdr: Black/Red/White; 4Cdr: Black/Red/Blue/White. 277/480Y: 2Cdr: Brown/Gray; 3Cdr: Brown/Orange/Gray; 4Cdr: Brown/Orange/Yellow/Gray, Standards: Encore Wire Corp
ALLIED AIR COMMERCIAL
Voltage: 208-230/1/60, Weight (Lbs): 506, Refrigerant: R410A, Tonnage: 4, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 27.0, Max Fuse/HACR Breaker: 45, Compressor - RLA: 18.0, Compressor - LRA: 117, Refrigerant Charge (Oz): 163, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 126,00, Gas Heating - Output BTUH: 102,100, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 45-75 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 528, Refrigerant: R410A, Tonnage: 5, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 39.7, Max Fuse/HACR Breaker: 60, Compressor - RLA: 24.3, Compressor - LRA: 144.2, Refrigerant Charge (Oz): 161, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 126,00, Gas Heating - Output BTUH: 102,100, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 45-75 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 366, Refrigerant: R410A, Tonnage: 2, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 17.4, Max Fuse/HACR Breaker: 25, Compressor - RLA: 10.9, Compressor - LRA: 59.3, Refrigerant Charge (Oz): 80, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 72,000, Gas Heating - Output BTUH: 58,400, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 374, Refrigerant: R410A, Tonnage: 2.5, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 20.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 13.5, Compressor - LRA: 72.5, Refrigerant Charge (Oz): 96, Cooling - Rated AHRI Capacity Btuh: 28,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 72,000, Gas Heating - Output BTUH: 58,400, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 389, Refrigerant: R410A, Tonnage: 3, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 35, Compressor - RLA: 15.4, Compressor - LRA: 83.9, Refrigerant Charge (Oz): 81, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 90,000, Gas Heating - Output BTUH: 72,900, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 493, Refrigerant: R410A, Tonnage: 3.5, HSPF: 8.0, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 165, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Sound dBA: 78, Gas Heating - Input BTUH: 90,000, Gas Heating - Output BTUH: 72,900, Gas Heating - Efficiency AFUE: 81, Gas Heating - Temp Rise Range °F: 40-70 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, L models comply with California Energy Commission Low NOx regulations, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multi speed motor for wide airflow range, Slide out blower housing for easy service, Controls, Direct spark ignition, Integrated control boards with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 331, Refrigerant: R410A, Tonnage: 2, Minimum Volts @ 60Hz: 197, MCA: 16.7, Max Fuse/HACR Breaker: 25, Compressor - RLA: 11.2, Compressor - LRA: 60.8, Refrigerant Charge (Oz): 70, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,500, Cooling - CFM: 800, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 343, Refrigerant: R410A, Tonnage: 2.5, Minimum Volts @ 60Hz: 197, MCA: 18.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 12.8, Compressor - LRA: 64, Refrigerant Charge (Oz): 77, Cooling - Rated AHRI Capacity Btuh: 28,400, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 20,700, Cooling - CFM: 1000, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 351, Refrigerant: R410A, Tonnage: 3, Minimum Volts @ 60Hz: 197, MCA: 20.6, Max Fuse/HACR Breaker: 30, Compressor - RLA: 14.1, Compressor - LRA: 72.2, Refrigerant Charge (Oz): 79, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,800, Cooling - CFM: 1200, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 424, Refrigerant: R410A, Tonnage: 3.5, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 108, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 30,000, Cooling - CFM: 1400, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 428, Refrigerant: R410A, Tonnage: 4, Minimum Volts @ 60Hz: 197, MCA: 26.9, Max Fuse/HACR Breaker: 40, Compressor - RLA: 17.9, Compressor - LRA: 96, Refrigerant Charge (Oz): 106, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 35,000, Cooling - CFM: 1600, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 467, Refrigerant: R410A, Tonnage: 5, Minimum Volts @ 60Hz: 197, MCA: 38.9, Max Fuse/HACR Breaker: 60, Compressor - RLA: 23.7, Compressor - LRA: 152.5, Refrigerant Charge (Oz): 125, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 41,600, Cooling - CFM: 1800, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connections, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 470, Refrigerant: R410A, Tonnage: 4, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 26.9, Max Fuse/HACR Breaker: 40, Compressor - RLA: 17.9, Compressor - LRA: 96, Refrigerant Charge (Oz): 82, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 35,000, Cooling - CFM: 1600, Heating – Input BTUH: 108,000, Heating – Output BTUH: 87,500, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 513, Refrigerant: R410A, Tonnage: 5, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 38.9, Max Fuse/HACR Breaker: 60, Compressor - RLA: 23.7, Compressor - LRA: 152.5, Refrigerant Charge (Oz): 125, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 41,600, Cooling - CFM: 1800, Heating – Input BTUH: 126,000, Heating – Output BTUH: 102,100, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 45-75, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 352, Refrigerant: R410A, Tonnage: 2, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 16.7, Max Fuse/HACR Breaker: 25, Compressor - RLA: 11.2, Compressor - LRA: 60.8, Refrigerant Charge (Oz): 70, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,500, Cooling - CFM: 800, Heating – Input BTUH: 54,000, Heating – Output BTUH: 43,800, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 30-60, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 358, Refrigerant: R410A, Tonnage: 2, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 16.7, Max Fuse/HACR Breaker: 25, Compressor - RLA: 11.2, Compressor - LRA: 60.8, Refrigerant Charge (Oz): 70, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,500, Cooling - CFM: 800, Heating – Input BTUH: 72,000, Heating – Output BTUH: 58,400, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 370, Refrigerant: R410A, Tonnage: 2.5, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 18.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 12.8, Compressor - LRA: 64, Refrigerant Charge (Oz): 77, Cooling - Rated AHRI Capacity Btuh: 28,400, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 20,700, Cooling - CFM: 1000, Heating – Input BTUH: 72,000, Heating – Output BTUH: 58,400, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 383, Refrigerant: R410A, Tonnage: 3, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 20.6, Max Fuse/HACR Breaker: 30, Compressor - RLA: 14.1, Compressor - LRA: 72.2, Refrigerant Charge (Oz): 79, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,800, Cooling - CFM: 1200, Heating – Input BTUH: 72,000, Heating – Output BTUH: 58,400, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 35-65, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 389, Refrigerant: R410A, Tonnage: 3, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 20.6, Max Fuse/HACR Breaker: 30, Compressor - RLA: 14.1, Compressor - LRA: 72.2, Refrigerant Charge (Oz): 79, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,800, Cooling - CFM: 1200, Heating – Input BTUH: 90,000, Heating – Output BTUH: 72,900, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 460, Refrigerant: R410A, Tonnage: 3.5, Compressor Type: Single-Stage Scroll, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 84, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 30,000, Cooling - CFM: 1400, Heating – Input BTUH: 90,000, Heating – Output BTUH: 72,900, Heating – Efficiency AFUE: 81%, Heating – Temp Rise Range °F: 40-70, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, Microban Antimicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Heat Exchanger, L models comply with California Energy Commission Low NOx regulations, Aluminized Tri-Dimple tubular heat exchanger for increased efficiency, Pest protected flue outlet, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service Controls, Solid state integrated blower control board with L.E.D. self diagnostics, Direct spark ignition, Color coded wiring for easy service, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty/lifetime heat exchanger warranty available. ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 333, Refrigerant: R410A, Tonnage: 2, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 17.4, Max Fuse/HACR Breaker: 25, Compressor - RLA: 10.9, Compressor - LRA: 59.3, Refrigerant Charge (Oz): 80, Cooling - Rated AHRI Capacity Btuh: 22,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 16,700, Cooling - CFM: 850, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 342, Refrigerant: R410A, Tonnage: 2.5, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 20.7, Max Fuse/HACR Breaker: 30, Compressor - RLA: 13.5, Compressor - LRA: 72.5, Refrigerant Charge (Oz): 96, Cooling - Rated AHRI Capacity Btuh: 28,600, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 21,700, Cooling - CFM: 1050, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 352, Refrigerant: R410A, Tonnage: 3, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 35, Compressor - RLA: 15.4, Compressor - LRA: 83.9, Refrigerant Charge (Oz): 81, Cooling - Rated AHRI Capacity Btuh: 34,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 25,200, Cooling - CFM: 1250, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 455, Refrigerant: R410A, Tonnage: 3.5, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 24.4, Max Fuse/HACR Breaker: 40, Compressor - RLA: 15.9, Compressor - LRA: 85, Refrigerant Charge (Oz): 165, Cooling - Rated AHRI Capacity Btuh: 40,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 30,800, Cooling - CFM: 1400, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 460, Refrigerant: R410A, Tonnage: 4, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 27.0, Max Fuse/HACR Breaker: 45, Compressor - RLA: 18.0, Compressor - LRA: 117, Refrigerant Charge (Oz): 163, Cooling - Rated AHRI Capacity Btuh: 46,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 34,000, Cooling - CFM: 1600, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/1/60, Weight (Lbs): 482, Refrigerant: R410A, Tonnage: 5, HSPF: 8.0, Minimum Volts @ 60Hz: 197, MCA: 39.7, Max Fuse/HACR Breaker: 60, Compressor - RLA: 24.3, Compressor - LRA: 144.2, Refrigerant Charge (Oz): 161, Cooling - Rated AHRI Capacity Btuh: 57,000, Cooling - SEER: 14.0, Cooling - EER: 11.0, Cooling - Rated Sensible Capacity Btuh: 41,600, Cooling - CFM: 1800, Sound dBA: 78 Refrigerant System, Environmentally friendly R410A refrigerant, Copper tubing with enhanced fin coils, Internal service gauge ports, Sleeved distributor tubes, MicroBan AntiMicrobial Drain Pan, High and Low Threaded pressure switched for system protection, Cabinet Construction, Rounded corners for safety and an attractive, clean appearance, One piece base design for strength and stability, Drain ports for condensate management and coil runoff, Low profile, with compact footprint, Insulation to minimize heat loss plus reduce sound, Textured pre-painted steel cabinet finish, Superior service access to components, Louvered coil guard protection, One piece no leak top design, Blower, Insulated compartment to reduce sound, Efficient multispeed motor for wide airflow range, Slide out blower housing for easy service, Controls, Integrated control with L.E.D. self diagostics, Defrost control board with field selectable time intervals, High and low refrigerant pressure switches for system protection, Built in short cycle protection to protect compressor, Built in quiet shift operation during defrost, Installation, Horizontal or down discharge capable, Utility connections on right side, Tabbed duct flanges for simple duct connection, Warranty, 10 year limited parts and compressor warranty ARMSTRONG AIR
Voltage: 208-230/60/1, Refrigerant: 410A, Shipping Weight (Lbs): 210, Voltage Range: 197-253, SEER: 14, Compressor - RLA: 16.7, Compressor - LRA: 79, Refrigerant Charge (Oz): 161, Sound dBA: 76, Configuration: Louvered, Minimum Circuit Amp: 22.6, Max Over Current Device (amps): 35, Dimensions (Width x Depth x Height) In: 28.25 x 28.25 x 37, Nominal Capacity (Btuh): 41,000, Outdoor Fan Motor - Rated Load (amps): 1.7, Outdoor Fan Motor - Rated HP: 1/4, Outdoor Fan Motor - Nominal RPM: 825 CONCORD
Voltage: 208-230/60/1, Refrigerant: 410A, Shipping Weight (Lbs): 251, Voltage Range: 197-253, SEER: 14, Compressor - RLA: 19.9, Compressor - LRA: 109, Refrigerant Charge (Oz): 179, Sound dBA: 80, Configuration: Louvered, Minimum Circuit Amp: 26.7, Max Over Current Device (amps): 45, Dimensions (Width x Depth x Height) In: 28.25 x 28.25 x 37, Nominal Capacity (Btuh): 47,000, Outdoor Fan Motor - Rated Load (amps): 1.8, Outdoor Fan Motor - Rated HP: 1/3, Outdoor Fan Motor - Nominal RPM: 825 CONCORD
Voltage: 208-230/60/1, Refrigerant: 410A, Shipping Weight (Lbs): 235, Voltage Range: 197-253, SEER: 14, Compressor - RLA: 25.0, Compressor - LRA: 134, Refrigerant Charge (Oz): 178, Sound dBA: 78, Configuration: Louvered, Minimum Circuit Amp: 34.1, Max Over Current Device (amps): 50, Dimensions (Width x Depth x Height) In: 32.25 x 32.25 x 37, Nominal Capacity (Btuh): 59,000, Outdoor Fan Motor - Rated Load (amps): 2.8, Outdoor Fan Motor - Rated HP: 1/3, Outdoor Fan Motor - Nominal RPM: 825 CONCORD
Product Image Not Available14.7 Kw 240 Volt Heat Strip for 4 - 5 Ton
Locke Part #: L7508MFG Part #: 8604-082 Compare
BARD MANUFACTURING COMPANY INC
SEP100AN.jpg145,000 BTU Commercial Unit Heater
Locke Part #: L6204MFG Part #: SEP145AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 20-3/16 x 31-5/16, Nominal Gas Heat Input: 145,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 4, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 1900 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod. ADVANCED DISTRIBUTOR PRODUCTS
Product Image Not Available14W33 15KW 1PH HT STRIP
Locke Part #: L4364MFG Part #: 14W33 Compare
ALLIED AIR COMMERCIAL
Model: CDV156C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 18”, Depth: 9-3/4”, Height: 29-3/4”, Weight (Lbs): 65, Vent Size: 9", Gas Type: L.P., Input (Btu/hr): 15,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 22˝, Maximum Wall Thickness: 24”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top. COZY HEATING 673154200406
Model: CDV155C, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: White, Width: 18”, Depth: 9-3/4”, Height: 29-3/4”, Weight (Lbs): 65, Vent Size: 9", Gas Type: Natural, Input (Btu/hr): 15,000, Control: MilliVolt, Wall Stat, Gas Inlet Size: 1/2”, Center of Horizontal Vent to Floor: 22˝, Maximum Wall Thickness: 24”, Minimum Wall Thickness: 5” Cozy Direct Vents feature factory installed controls that include an energy efficient low-BTU, 100% safety pilot, a built-in pressure regulator for either natural or propane gas and a convenient, matchless manual spark igniter, Continuous seam-welded combustion chamber of cold roll steel maximizes heat transfer and bears a 10 year, non prorated warranty., Generates it s own power and, therefore requires no electricity to operate, assuring heat even during a power failure, Offered with convenient wall thermostat or optional built-in bulb stat (BBSK) with control knob on unit top. COZY HEATING 673154200307
Product Image Not Available15 kW Heat Strip for KHA, KCA
Locke Part #: L4310MFG Part #: 14W36 Compare
ALLIED AIR COMMERCIAL
Voltage: 208-240, kw: 15 ARMSTRONG AIR
Voltage: 208-240, kw: 15 ARMSTRONG AIR
Volts: 208/230, Phase: 3, Tonnage: 15, Outdoor Coil Net Face Area Sq. Ft.: 41.4, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (3) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 1100, Outdoor Fans Diameter in.- No. of Blades: (3) 24, Outdoor Fans Total Air Volume - CFM: 12000 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007, All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Copper tube Coil construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections, Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount, Outdoor Coil Fans PVC coated fan guard furnished. ALLIED AIR COMMERCIAL
L4394.jpg15 Ton 3PH 460V Gas/Electric Packaged Units
Locke Part #: L4395MFG Part #: Z3941 Compare
Volts: 460, Phase: 3, Tonnage: 15, Outdoor Coil Net Face Area Sq. Ft.: 41.4, Outdoor Coil Tube Diameter in.: 3/8, Outdoor Coil Number of Rows: 2, Outdoor Coil Fins per inch: 20, Outdoor Fans Motor Horsepower: (3) 1/3hp, Outdoor Fans Motor rpm: 1075, Outdoor Fans Total Motor watts: 1100, Outdoor Fans Diameter in.- No. of Blades: (3) 24, Outdoor Fans Total Air Volume - CFM: 12000 Approvals, ETL and CSA listed, Efficiency rating verified by GAMA, Components bonded for grounding to meet safety standards for servicing required by UL, ULC and National Electrical Codes., All models are certified in accordance with the ULE certification program, which is based on AHRI Standard 340/360- 2007, All models are ASHRAE 90.1-2007 compliant., ISO 9001 Registered Manufacturing Quality System., Heating System, Aluminized steel inshot burners, direct spark ignition, electronic flame sensor, combustion air inducer, redundant automatic dual stage gas valve with manual shutoff., Heat Exchanger Tubular construction, aluminized steel, life cycle tested. Optional Stainless Steel Heat Exchanger is required if mixed air temperature is below 45 F., Watchguard circuit on module automatically resets ignition controls after one hour of continuous thermostat demand after unit lockout, eliminating nuisance service calls., Ignition control is factory installed in the controls section., Factory installed, limit control with fixed temperature setting. Heat limit control protects heat exchanger and other components from overheating., Flame roll-out switch, flame sensor and combustion air inducer proving switch protect system operation., Cooling System, Designed to maximize sensible and latent cooling performance at design conditions., System can operate from 30 F to 125 F without any additional controls., R-410A Refrigerant is Non-chlorine based, ozone friendly., Scroll compressors on all models for high performance, reliability and quiet operation., Resiliently mounted on rubber grommets for quiet operation., Thermal Expansion Valves Assures optimal performance throughout the application range., High Pressure Switch Protects the compressor from overload conditions such as dirty condenser coils, blocked refrigerant flow, or loss of outdoor fan operation., Copper tube Coil construction, enhanced rippled-edge aluminum fins, flared shoulder tubing connections, silver soldered construction for improved heat transfer. Factory leak tested., Plastic Condensate Drain Pan, sloped to meet drainage requirements of ASHRAE 62.1., Side or bottom drain connections, Reversible to allow connection at back of unit., Outdoor Coil Fan Motors Thermal overload protected, totally enclosed, permanently lubricated ball bearings, shaft up, wire basket mount, Outdoor Coil Fans PVC coated fan guard furnished. ALLIED AIR COMMERCIAL
Product Image Not Available15-5/8" H x 26" W x 25-5/8" D
Locke Part #: L4999MFG Part #: RAB46A Compare
Width: 26", Depth: 25-5/8", Height: 15-5/8" GE APPLIANCE
Cabinet Color: Embossed, Slab Number: 32, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 15.0 x Pan 14.0 x Pan 19.5, Nominal MBTUH: 36, Slab: Copper, Cabinet Upper Notch: Uncased Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
Refrigerant: R410A, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 17.0/18.0, Current Rated/Max (A) - Heating: 14.8/18.8, EER: 8.5, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 9.0, Noise Level dB(A) - Clg/Htg (Hi): 50/50, Noise Level dB(A) - Clg/Htg (Low): 37/37, Noise Level dB(A) - Clg/Htg (Med): 42/42, Noise Level dB(A) - Clg/Htg (Quiet): 32/33, Nominal Cooling (BTU/h): 33,000, Nominal Heating (BTU/h): 34,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 15.5, Conn Pipe Diameter (In) - Indoor: Suc.5/8, Dimensions (Height x Width x Depth) - Indoor: 12-5/8" x 39-5/16" x 9", Net Weight - Indoor (Lbs): 31 FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.3/8, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 17.0/18.0, Current Rated/Max (A) - Heating: 14.8/18.8, Dimensions (Height x Width x Depth) - Outdoor: 32-11/16" x 35-7/16" x 13", EER: 8.5, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 9.0, Net Weight - Outdoor (Lbs): 134, Noise Level dB(A) - Clg/Htg (Hi): 50/50, Noise Level dB(A) - Clg/Htg (Low): 37/37, Noise Level dB(A) - Clg/Htg (Med): 42/42, Noise Level dB(A) - Clg/Htg (Quiet): 32/33, Nominal Cooling (BTU/h): 33,000, Nominal Heating (BTU/h): 34,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 15.5 FUJITSU GENERAL AMERICA, INC
L5689.jpg1500w Heater
Locke Part #: L5689MFG Part #: IEP1524 Compare
Short-wave infrared technology provides instant comfort heat., Restaurant/hotel patios, Sports venues, Balcony/terrace, Hobby shops, Garage/workshop, Warehouse facilities Indoor/Outdoor, 120v,1,500w, 5.6"w x 5.7"h x 4.4"d 5lb. SCHWANK USA INC
L4000B.jpg16" x 42" x 13-3/4" Wall Sleeve
Locke Part #: L4009MFG Part #: PDXWSA Compare
Galvanized steel is prepared in a state-ofthe-art, multi-step process for stronger paint adhesion, then powder coated with a polyester finish and cured in an oven for exceptional durability. The wall sleeve is insulated for thermal efficiency. Friedrich Air Cond
Voltage: 230/60/1, Weight (Lbs): 200, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 11.4, Compressor - LRA: 52.0, Refrigerant Charge (Oz): 117, Sound dBA: 74, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/5, Minimum Circuit Amp: 13.9, Max Over Current Device (amps): 20, Fan Motor - Rated Load (amps): 1.1, Fan Motor - Nominal RPM: 1075, Dimensions (Width x Depth x Height) In: 24-3/4 x 26-3/4 x 29-3/4, Nominal Capacity (Btuh): 24,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Voltage: 230/60/1, Weight (Lbs): 230, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 19.0, Compressor - LRA: 82.0, Refrigerant Charge (Oz): 137, Sound dBA: 74, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/6, Minimum Circuit Amp: 21.9, Max Over Current Device (amps): 35, Fan Motor - Rated Load (amps): 1.1, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 29-3/4, Nominal Capacity (Btuh): 36,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Voltage: 230/60/1, Weight (Lbs): 262, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 24.0, Compressor - LRA: 96.0, Refrigerant Charge (Oz): 180, Sound dBA: 76, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/6, Minimum Circuit Amp: 28.1, Max Over Current Device (amps): 45, Fan Motor - Rated Load (amps): 1.1, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 37-3/4, Nominal Capacity (Btuh): 48,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Voltage: 230/60/1, Weight (Lbs): 310, Refrigerant: 410A, Voltage Range: 197 - 253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 26.0, Compressor - LRA: 118.0, Refrigerant Charge (Oz): 214, Sound dBA: 76, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/4, Minimum Circuit Amp: 33.8, Max Over Current Device (amps): 55, Fan Motor - Rated Load (amps): 1.7, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 43-3/4, Nominal Capacity (Btuh): 60,000 Compressor, High-efficiency 2 stage Copeland UltraTech scroll compressor, R410a refrigerant, Grommet-mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Service valves positioned for quick installation and easy service, High and low pressure switches factory installed, Trade available components, Factory installed crank case heater, Charged for 15 ft. of line set, Thermostat Flexibility - Works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat, Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panels remove with just two screws per panel for easy coil cleaning and service, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC-coated wire fan discharge grille, External gauge ports for easy service, Coils, Enhanced aluminum fins and copper tubing for higher efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Voltage: 230/60/1, Weight (Lbs): 207, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 11.4, Compressor - LRA: 52, Refrigerant Charge (Oz): 146, Sound dBA: 73, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/10, Minimum Circuit Amp: 13.5, Max Over Current Device (amps): 20, Fan Motor - Rated Load (amps): 0.7, Fan Motor - Nominal RPM: 1075, Dimensions (Width x Depth x Height) In: 24-3/4 x 26-3/4 x 33-3/4, Nominal Capacity (Btuh): 24,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Voltage: 230/60/1, Weight (Lbs): 253, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 19.0, Compressor - LRA: 82, Refrigerant Charge (Oz): 192, Sound dBA: 75, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/4, Minimum Circuit Amp: 22.5, Max Over Current Device (amps): 35, Fan Motor - Rated Load (amps): 1.7, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 29-3/8 x 31-1/4 x 37-3/4, Nominal Capacity (Btuh): 36,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Voltage: 230/60/1, Weight (Lbs): 288, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 24.0, Compressor - LRA: 96, Refrigerant Charge (Oz): 236, Sound dBA: 75, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/3, Minimum Circuit Amp: 28.2, Max Over Current Device (amps): 45, Fan Motor - Rated Load (amps): 1.8, Fan Motor - Nominal RPM: 825, Dimensions (Width x Depth x Height) In: 35-3/4 x 37-1/4 x 37-3/4, Nominal Capacity (Btuh): 48,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Voltage: 230/60/1, Weight (Lbs): 313, Refrigerant: 410A, Voltage Range: 197-253, SEER: 16, Compressor Type: Two-Stage Scroll Compressor, Compressor - RLA: 26.0, Compressor - LRA: 118, Refrigerant Charge (Oz): 244, Sound dBA: 74, Configuration: Louvered Two-Stage Communicating Enabled, Fan Motor - Rated HP: 1/3, Minimum Circuit Amp: 35.1, Max Over Current Device (amps): 60, Fan Motor - Rated Load (amps): 2.8, Fan Motor - Nominal RPM: ECM, Dimensions (Width x Depth x Height) In: 35-3/4 x 37-1/4 x 43-3/4, Nominal Capacity (Btuh): 60,000 Compressor, High-efficiency 2 stage Copeland Ultra Tech scroll compressor, R410a refrigerant, Grommet mounted compressor for quiet operation, Internally protected against high temperature motor overload conditions, Heavy-duty compressor sound blanket for quiet operation, Components, Full metal louvered panels remove for easy coil cleaning and service, Bi-directional filter drier for long-lasting durability and system protection, Discharge muffler for quiet operation, Factory installed crank case heater, Factory installed high and low pressure switch, Variable speed condenser fan motor with swept wing fan blade, Advanced design defrost system featuring a smart logic for power consumption savings, Service valves positioned for quick installation and easy service, Trade available components, Quiet Shift capable for sound control during defrost, Communicating features, Thermostat flexibility - works with the Comfort Sync T-Stat (when matched with communicating indoor unit) or a conventional 24V T-Stat Self diagnostics saves last 10 fault codes regardless of power interruption, Cabinet, Full metal louvered panel coil guard protection, Controls located in corner post for easy installation and service, Rounded corners for safety and attractive, clean appearance, Baked polyester paint finish over galvanized steel for maximum durability, PVC coated wire fan discharge grill, External gauge ports for easy service, Raised base pan with ports allows for excellent water and debris drainage, Coil, Enhanced aluminum fins and copper tubing for high efficiency and capacity, Raised coil prevents debris from collecting in bottom of coil and causing loss of airflow, Design, Designed for ambient up to 125 F, Warranty, 10 year limited warranty on compressor, 10 year limited warranty on all parts ARMSTRONG AIR
Refrigerant: R410A, EER: 10.00, HSPF: 8.5, Net Weight - Outdoor (Lbs): 115, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 16.0, Net Weight - Indoor (Lbs): 33, Capacity Cooling (Rated) (BTU): 22000, Capacity Heating (Rated) @ 17°F (BTU): 18600, Capacity Heating (Rated) @ 47°F (BTU): 26600, Compressor Type: Inverter, Dimensions - Indoor - (L x W x H): 42-3/8”×15-11/16”×12-15/16”, Dimensions - Outdoor - (L x W x H): 40-9/16”×18-1/16”×29-9/16”, Energy Star: 4.50, Liquid Line OD (In): 1/4”, Sound Rating - Indoor (High/Med/Low/Quiet) (Db-A): 49/43/39/34, Sound Rating - Outdoor (db-A): 53, Suction Line OD (In): 1/2” Friedrich Air Cond
Tonnage: 1.5-2, Cabinet Color: Embossed, Slab Number: 31, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 16.5 x 14.5 x 20.5, Nominal MBTUH: 24, Slab: Copper, Cabinet Upper Notch: 0.75" (standard) Embossed upflow cased coil, Right-hand service, with 410A piston., Anti-microbial drain pan with Microban , ADVANCED DISTRIBUTOR PRODUCTS
Refrigerant: R410A, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 13.8/16.8, Current Rated/Max (A) - Heating: 12.3/18.8, EER: 9.5, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 9.0, Noise Level dB(A) - Clg/Htg (Hi): 47/49, Noise Level dB(A) - Clg/Htg (Low): 37/37, Noise Level dB(A) - Clg/Htg (Med): 42/42, Noise Level dB(A) - Clg/Htg (Quiet): 32/33, Nominal Cooling (BTU/h): 30,000, Nominal Heating (BTU/h): 30,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 16.5, Conn Pipe Diameter (In) - Indoor: Suc.5/8, Dimensions (Height x Width x Depth) - Indoor: 12-5/8" x 39-5/16" x 9", Net Weight - Indoor (Lbs): 31 FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.3/8, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 13.8/16.8, Current Rated/Max (A) - Heating: 12.3/18.8, Dimensions (Height x Width x Depth) - Outdoor: 32-11/16" x 35-7/16" x 13", EER: 9.5, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 9.0, Net Weight - Outdoor (Lbs): 134, Noise Level dB(A) - Clg/Htg (Hi): 47/49, Noise Level dB(A) - Clg/Htg (Low): 37/37, Noise Level dB(A) - Clg/Htg (Med): 42/42, Noise Level dB(A) - Clg/Htg (Quiet): 32/33, Nominal Cooling (BTU/h): 30,000, Nominal Heating (BTU/h): 30,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 16.5 FUJITSU GENERAL AMERICA, INC
Duct Size: 16RD RSI's 510 SERIES concentric diffuser systems are designed to provide a single point air distribution system. The systems may be used with either a T-Bar ceiling or a plaster ceiling., Standard features include:, 1., All Aluminum diffuser with aluminum return air egg crate., 2., Built-in Anti-Sweat gasket., 3., Molded Fiberglass Transition (through five tons)., 4., Built-in hanging supports., 5., Diffuser box constructed of fiberglass duct board (through 7.5 tons) or sheet metal., Standard benefits include:, 1., Even four way airflow., 2., Factory assembled & sealed., 3., Guaranteed not to "sweat"., 4., Guaranteed not to recirculate air flow (short cycle)., 5., Return air egg crate is easily removed., 6., Units are fully insulated (both supply and return). RRS ROOFTOP SYSTEMS
Tonnage: 2.0 - 3.0, Dimensions Height x Width x Lenght (in): 17.5 x 21.5 x 26.5, Cabinet Color: Grey, Slab Number: D12, Metering Device: Piston (R-410A), Duct Flange: 0.75" Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
Tonnage: 2.0 - 3.0, Dimensions Height x Width x Lenght (in): 17.5 x 21.5 x 26.5, Cabinet Color: Grey, Slab Number: D12, Metering Device: Piston (R-410A), Duct Flange: 0.75" Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
Tonnage: 2.5 - 4.0, Dimensions Height x Width x Lenght (in): 17.5 x 21.5 x 26.5, Cabinet Color: Grey, Slab Number: D14, Metering Device: Piston (R-410A), Duct Flange: 0.75" Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
Tonnage: 2.5 - 3.5, Dimensions Height x Width x Lenght (in): 17.5 x 21.5 x 26.5, Cabinet Color: Grey, Slab Number: D13, Metering Device: Piston (R-410A), Duct Flange: 0.75" Armstrong painted horizontal coil, side service connections, bidirectional airflow, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
SEP100AN.jpg175,000 BTU Commercial Unit Heater
Locke Part #: L6205MFG Part #: SEP175AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 23-1/8 x 31-5/16, Nominal Gas Heat Input: 175,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 2200 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod. ADVANCED DISTRIBUTOR PRODUCTS
L4025.jpg17800/17600 Cooling BTU/h Room Air Conditioners
Locke Part #: L4027MFG Part #: SM18N30C Compare
EER: 10.0 / 10.0, Capacity Cooling BTU/h: 17800/17600, Moisture Removal Pt/ h: 4.4, Air Flow (High) CFM: 400 Top-of-the-line commercial grade quality featuring easy-to-use manual controls., AHAM certified performance, High efficiency Energy Star qualified models, Money Saver setting saves energy by cycling the fan with the compressor, Four cooling speeds, one fan only setting, Ultra quiet operation, Easy to clean, removable filter with antimicrobial treatment for protection against fungal and bacterial growth, Blackout masonite wings (semi permant side curtains), Eight-way air flow control, Fresh air intake and stale air exhaust vents, Performance Ratings, Locke Code, L4025, L4027, L4028, Capacity Cooling BTU/h, 12200/12000, 17800/17600, 23500/23000, EER, 10.0 / 10.2, 10.0 / 10.0, 9.4 / 9.4, Moisture Removal Pt/ h, 3.5, 4.4, 7.0, Air Flow (High) CFM, 325, 400, 490, Electrical Characteristics ( 60 Hertz ), Volts Rated, 230/208, 230/208, Cooling Amps, 5.4/5.8, 8.1/8.7, 11.2/12.1, Cooling Watts, 1220/1176, 1780/1760, 2479/2421 Friedrich Air Cond
Product Image Not Available18" Height Downflow Hybrid Roof Curbs
Locke Part #: L9646MFG Part #: 10Z26 Compare
Height: 18" ALLIED AIR COMMERCIAL
Pallet Qty: 8, Weight (lbs): 32, Slab Number: E33, Nominal MBTUH: 36, Coil Height: 17", Installed Piston Sizes: 67, Nominal Tonnage: 1.5 - 3, Pan Depth: 19-1/2", Pan Width: 18", Piston Size: Piston (R-410A) Sloped drain pan for lower water retention., Downflow drip shields are molded into drain pan., Drain pan in 18" and 19 5/8" widths to match all furnace sizes, Piston or TXV models available., Filter-friendly top plate on most models (except 22" & above). Down-turned headers are sized out to easily receive line set, Dedicated upflow/downflow, Sweat connections with available quick-connect stub kit., Leak free product - pressure tested twice (500 psi immersion & 300 psi He), High performance fin design., Factory software for TXV failure testing., Includes die-cut foam sheet for sealing, drain ELL, drain hose & clamp., Protective foam packaging, Dry air holding charge. ADVANCED DISTRIBUTOR PRODUCTS
Pallet Qty: 8, Weight (lbs): 45, Slab Number: E59, Nominal MBTUH: 60, Coil Height: 19", Installed Piston Sizes: 93, Nominal Tonnage: 1.5 - 3.5, Pan Depth: 19-1/2", Pan Width: 18", Piston Size: Piston (R-410A) Sloped drain pan for lower water retention., Downflow drip shields are molded into drain pan., Drain pan in 18" and 19 5/8" widths to match all furnace sizes, Piston or TXV models available., Filter-friendly top plate on most models (except 22" & above). Down-turned headers are sized out to easily receive line set, Dedicated upflow/downflow, Sweat connections with available quick-connect stub kit., Leak free product - pressure tested twice (500 psi immersion & 300 psi He), High performance fin design., Factory software for TXV failure testing., Includes die-cut foam sheet for sealing, drain ELL, drain hose & clamp., Protective foam packaging, Dry air holding charge. ADVANCED DISTRIBUTOR PRODUCTS
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Liq. 1/4 x 2, Suc. 3/8 x 2, Cooling Operating Range (°F): 14 to 115, Dimensions (Height x Width x Depth) - Outdoor: 32-11/16" x 35-7/16" x 13", EER: 13.5, Heating Operating Range (°F): -15 to 75, HSPF: 10.3, Net Weight - Outdoor (Lbs): 134, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 21.5, Connectable Indoor Unit Number: 2, Fan - Type x Quantity: Propeller x 1, Rated Capacity Cooling/Heating (BTU/h): 18,000/22,000, Sound Pressure Level Cooling - dB(A): 48, Sound Pressure Level Heating - dB(A): 50 FUJITSU GENERAL AMERICA, INC
Swing louvers (up/down), Auto-restart, Auto-shut flaps, Washable, reusable air filters, Low Ambient operation, Removable front grille, Auto hang over, 115 volts, Indoor Unit 32-1/8W x 11H x 7D, Outdoor Unit 30-3/4W x 20-7/8H x 9-7/8D, Wireless Remote Control:, 24 hour timer, Sleeper timer, Auto/cool/dry/fan modes, 3 fan speeds plus auto-fan, 4 different transmitter codes, Secured remote control holder Friedrich Air Cond
L7334.jpg18,000 BTU Flex HP Outdoor Unit
Locke Part #: L7378MFG Part #: AOU18RLFC CASSETT/ARU Compare
Refrigerant: R410A, Cooling: 18,000 BTU/h, SEER: 19.2, Heating: 21,600 BTU/h, Voltage/ Frequency/Phase: 208-230/60/1 Standard Features:, Seven year compressor warranty, Five year parts warranty, Energy Star Qualified, Auto Restart / Reset, Refrigerant R410A, Quiet Mode, Sleep Timer, Built in Low Ambient, Use with compact ceiling Cassettes or slim ducts FUJITSU GENERAL AMERICA, INC
L7317.jpg18,000 BTU Multi-Zone Outdoor Unit Heat Pumps
Locke Part #: L7317MFG Part #: AOU18RLXFZ Compare
As part of the Halcyon HFI line of equipment, select indoor units are compatible with other HFI outdoor units, meaning mix and match capabilities with fewer components., Connectable Capacity, This function allows you to connect indoor, units that can exceed outdoor unit capacity (See sizing guide on page 19 for details). However, if you connect indoor units that exceed 100% of the outdoor unit s capacity there are limitations., Standard Features, Connect 2 to 4 indoor units, depending on model, Operate as few as one indoor unit or all indoor units., Connect 14,000 to 39,000 BTU, No branch boxes or separation tubes required, Choose from 3 indoor unit styles - wall mount, slim duct or cassette, Two combinations are ENERGY STAR Qualified and Federal Tax Credit Qualified, Create over 300 combinations based on indoor type and BTU, The compact size of the outdoor units allows for many installation opportunities., A high performance, low noise, large capacity DC twin rotary compressor is used., Locke, L7317, L7318, L7319, Connectable Indoor Unit Number, 2 to 3, 3 to 4, Connectable Unit Capacity Class BTU/h, 14 to 21,000, 14 to 27,000, 27 to 39,0002, Rated Capacity Cooling/Heating BTU/h, 18,000/22,000, 22,000/24,000, 35,200/36,400, Clg. Operating Range F( C), 14 to 115, 32 to 115, Htg. Operating Range F( C), 5 to 75, 14 to 75, Input Power: Clg/Htg Rated kW*, 1.44/1.87, 1.76/1.73, 4.00/3.00, Voltage/Frequency/Phase, 208-230/60/, 208-230/60/1, Current: Total Max. (A), 10.0, 13.7, 20.1, Minimum Circuit Ampacity (A), 13, 17, 25, Recommended Fuse Size (A), 25, 30, Outdoor Fan Airflow CFM (Clg/Htg), 1,795/1,619, 1,942/1,942, 2,119/2,237, Fan: Type x Quantity, Propeller x 1, Propeller x 1, Sound Pressure Level Cooling dB(A), 49, 51, 53, Sound Pressure Level Heating dB(A), 49, 52, 55, Pre-Charge Length Total Ft (m), 98, 164, Max. Length Total Ft (m), 164, 230, Max. Length Each Ft (m), 82, 82, Min. Length Total Ft (m), 49, 66, Min. Length Each Ft (m), 16, 16, Max. Pipe Height Difference Between, Outdoor Unit & Farthest Indoor Ft (m), 49, 49, Max. Pipe Height Difference Between, Indoor Units Ft (m), 33, 33, Connection Method, Flare, Flare, Conn., Pipe Diameter Inch, Liq. 1/4 x 2, Suc. 3/8 x 2, Liq. 1/4 x 3, Suc. 1/2 x 1, 3/8 x 2, Liq. 1/4 x 4, Suc. 1/2 x 1, 3/8 x 3, Net Weight lbs. (kg), 119, 124, 149, Dimensions: Height Inch, 27-9/16, 32-11/16, mm, 700, 830, Width Inch, 35-7/16, 35-7/16, mm, 900, 900, Depth Inch, 13, 13, mm, 330, 330, Refrigerant, R410A, R410A FUJITSU GENERAL AMERICA, INC
L7368.jpg18,000 BTU Slim Duct
Locke Part #: L7370MFG Part #: ARU18RLF Compare
Width: 35-7/16", Depth: 24-13/32", Height: 7-25/32", Refrigerant: R410A, Cooling BTU/h: 18,000, Heating BTU/h: 20,000, Volts/Hz/Ph: 208-230/60/1 Adaptable when ceiling cavity is small and there is no slope for drain., Air intake direction can be selected to match the installation site., Ductless Technology for Energy Efficiency, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses, typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption., Standard Features:, Dry Mode, Weekly Timer, Sleep Timer*, 24-Hour Timer*, Minimum Heat Mode*, Auto Mode, Quiet Mode, Auto Restart/ Reset, Auto Changeover, Long Piping Length, Condensate Pump, Fresh Air Intake, *Available only with optional FUJITSU GENERAL AMERICA, INC
L7324.jpg18,000 BTU Wall Mount Indoor Unit
Locke Part #: L7326MFG Part #: ASU18RLF Compare
Refrigerant: R410A, SEER: 19.2, Nominal: 21,600 BTU/h, Min - Max: 7,000- 29,000, Voltage/ Frequency/Phase: 208-230/60/1 Standard Features:, Wireless Remote Control, Sleep Timer, 24-Hour Timer, Dry Modevv, Auto Louver: Up/Down+, Auto Louver: 4-Way^, Auto Mode, Quiet Mode, Auto Restart/Reset, Auto Changeover, Economy Mode, Apple Catechin Filter, Ion Deodorizing Filter, Minimum Heat, These models are single zone 9, 12, 18 and 24,000 BTU ductless heat pumps, meaning they provide cooling in the summer and heat in the winter for year-round comfort., ENERGY STAR Qualified:, These four models meet strict energy efficiency guidelines set forth by the U.S. government, meaning they cut down on utility bills and may qualify for local state and utility company rebates of up to $1,200., Ductless Technology for Energy Efficiency:, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption., Part of the Halcyon Hybrid Flex Inverter (HFI) Line:, As part of the HFI line of components, indoor units ASU9RLF, ASU12RLF. ASU18RLF, and ASU24RLF are compatible with larger multizone outdoor units of the HFI line, meaning less SKUs to stock for distributors FUJITSU GENERAL AMERICA, INC
L7351.jpg18,000 BTU Wall Mount Indoor Unit
Locke Part #: L7351MFG Part #: ABU18RULX Compare
Refrigerant: R410A, Cooling: 0-115ºf, SEER: 16, Heating: 14-75ºf, Volts/Hz/Ph: 208-230/60/1 Standard Features:, Wireless Remote Control, 24 Hour Timer, Dry Mode, Auto Louver: 4 Way, Auto Mode, Energy Saver, Auto Restart/Reset, Auto Changeover, Low Ambient, Cold Prevention, Pump Down Operation, Fresh Air Intake*, Ductless Technology for Energy Efficiency, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption. FUJITSU GENERAL AMERICA, INC
L7354.jpg18,000 BTU Wall Mount Indoor Unit
Locke Part #: L7354MFG Part #: AUU18RCLX Compare
Refrigerant: R410A, Cooling: 0-115ºf, SEER: 16, Heating: 14-75ºf, Volts/Hz/Ph: 208-230/60/1 Standard Features:, Weekly Timer, Dry Mode, Auto Louver: Up/ Down, Auto Restart/Reset, Auto Changeover, Pump Down Operation, Child Lock Capable, Controls Up To 16 Systems, Full Function Wired Remote, Remote Controller Sensor, Energy Saver, Cold Prevention, Slender Fit, High Ceiling Mode, Branch Duct Capable, Low Ambient, Auto Mode, Ductless Technology for Energy Efficiency, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption. FUJITSU GENERAL AMERICA, INC
L7324.jpg18,000 BTU Wall Mount Outdoor Unit
Locke Part #: L7337MFG Part #: AOU18RLXFW1 Compare
Refrigerant: R410A, SEER: 19.2, Nominal: 21,600 BTU/h, Min - Max: 7,000- 29,000, Voltage/ Frequency/Phase: 208-230/60/1 Standard Features:, Wireless Remote Control, Sleep Timer, 24-Hour Timer, Dry Modevv, Auto Louver: Up/Down+, Auto Louver: 4-Way^, Auto Mode, Quiet Mode, Auto Restart/Reset, Auto Changeover, Economy Mode, Apple Catechin Filter, Ion Deodorizing Filter, Minimum Heat, These models are single zone 9, 12, 18 and 24,000 BTU ductless heat pumps, meaning they provide cooling in the summer and heat in the winter for year-round comfort., ENERGY STAR Qualified:, These four models meet strict energy efficiency guidelines set forth by the U.S. government, meaning they cut down on utility bills and may qualify for local state and utility company rebates of up to $1,200., Ductless Technology for Energy Efficiency:, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption., Part of the Halcyon Hybrid Flex Inverter (HFI) Line:, As part of the HFI line of components, indoor units ASU9RLF, ASU12RLF. ASU18RLF, and ASU24RLF are compatible with larger multizone outdoor units of the HFI line, meaning less SKUs to stock for distributors FUJITSU GENERAL AMERICA, INC
L7351.jpg18,000 BTU Wall Mount Outdoor Unit
Locke Part #: L7357MFG Part #: AOU18RLX Compare
Refrigerant: R410A, Cooling: 0-115ºf, SEER: 16, Heating: 14-75ºf, Volts/Hz/Ph: 208-230/60/1 Standard Features:, Wireless Remote Control, 24 Hour Timer, Dry Mode, Auto Louver: 4 Way, Auto Mode, Energy Saver, Auto Restart/Reset, Auto Changeover, Low Ambient, Cold Prevention, Pump Down Operation, Fresh Air Intake*, Ductless Technology for Energy Efficiency, Fujitsu s wall mounted mini-splits feature no ductwork, therefore they forego energy losses typically associated with central forced-air systems. Duct losses in a central air system can easily account for more than 30% of energy consumption. FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 10.5/11.8, Current Rated/Max (A) - Heating: 8.5/13.8, EER: 10.0, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 10.6, Noise Level dB(A) - Clg/Htg (Hi): 47/47, Noise Level dB(A) - Clg/Htg (Low): 35/36, Noise Level dB(A) - Clg/Htg (Med): 41/42, Noise Level dB(A) - Clg/Htg (Quiet): 31/33, Nominal Cooling (BTU/h): 24,000, Nominal Heating (BTU/h): 24,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 18.0, Conn Pipe Diameter (In) - Indoor: Suc.1/2, Dimensions (Height x Width x Depth) - Indoor: 12-5/8" x 39-5/16" x 9", Net Weight - Indoor (Lbs): 31 FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.1/4, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 10.5/11.8, Current Rated/Max (A) - Heating: 8.5/13.8, Dimensions (Height x Width x Depth) - Outdoor: 24-7/16" x 31-1/8" x 11-7/16", EER: 10.0, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 10.6, Net Weight - Outdoor (Lbs): 86, Noise Level dB(A) - Clg/Htg (Hi): 47/47, Noise Level dB(A) - Clg/Htg (Low): 35/36, Noise Level dB(A) - Clg/Htg (Med): 41/42, Noise Level dB(A) - Clg/Htg (Quiet): 31/33, Nominal Cooling (BTU/h): 24,000, Nominal Heating (BTU/h): 24,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 18.0 FUJITSU GENERAL AMERICA, INC
Tonnage: 2.5-3.0, Cabinet Color: Embossed, Slab Number: 31, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 18.5 x 14.5 x 20.5, Nominal MBTUH: 36, Slab: Copper, Cabinet Upper Notch: 0.75" (standard) Embossed upflow cased coil, Right-hand service, with 410A piston., Anti-microbial drain pan with Microban , ADVANCED DISTRIBUTOR PRODUCTS
Duct Size: 18RD RSI's 510 SERIES concentric diffuser systems are designed to provide a single point air distribution system. The systems may be used with either a T-Bar ceiling or a plaster ceiling., Standard features include:, 1., All Aluminum diffuser with aluminum return air egg crate., 2., Built-in Anti-Sweat gasket., 3., Molded Fiberglass Transition (through five tons)., 4., Built-in hanging supports., 5., Diffuser box constructed of fiberglass duct board (through 7.5 tons) or sheet metal., Standard benefits include:, 1., Even four way airflow., 2., Factory assembled & sealed., 3., Guaranteed not to "sweat"., 4., Guaranteed not to recirculate air flow (short cycle)., 5., Return air egg crate is easily removed., 6., Units are fully insulated (both supply and return). RRS ROOFTOP SYSTEMS
Cabinet Color: Embossed, Slab Number: 34, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 19.0 x Pan 14.0 x Pan 19.5, Nominal MBTUH: 36, Slab: Copper, Cabinet Upper Notch: Uncased Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
Cabinet Color: Embossed, Slab Number: 34, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 19.0 x Pan 15.5 x Pan 19.5, Nominal MBTUH: 42, Slab: Copper, Cabinet Upper Notch: Uncased Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
Refrigerant: R410A, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 1.44/1.89, Current Rated/Max (A) - Heating: 1.29/2.69, EER: 12.5, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 10.6, Noise Level dB(A) - Clg/Htg (Hi): 42/43, Noise Level dB(A) - Clg/Htg (Low): 31/33, Noise Level dB(A) - Clg/Htg (Med): 35/36, Noise Level dB(A) - Clg/Htg (Quiet): 26/28, Nominal Cooling (BTU/h): 18,000, Nominal Heating (BTU/h): 18,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 19.0, Conn Pipe Diameter (In) - Indoor: Suc.1/2, Dimensions (Height x Width x Depth) - Indoor: 12-5/8" x 39-5/16" x 9", Net Weight - Indoor (Lbs): 31 FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.1/4, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 1.44/1.89, Current Rated/Max (A) - Heating: 1.29/2.69, Dimensions (Height x Width x Depth) - Outdoor: 24-7/16" x 31-1/8" x 11-7/16", EER: 12.5, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): 5~75, HSPF: 10.6, Net Weight - Outdoor (Lbs): 86, Noise Level dB(A) - Clg/Htg (Hi): 42/43, Noise Level dB(A) - Clg/Htg (Low): 31/33, Noise Level dB(A) - Clg/Htg (Med): 35/36, Noise Level dB(A) - Clg/Htg (Quiet): 26/28, Nominal Cooling (BTU/h): 18,000, Nominal Heating (BTU/h): 18,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 19.0 FUJITSU GENERAL AMERICA, INC
Product Image Not Available19.2 Kw 240 Volt Heat Strip for 4 - 5 Ton
Locke Part #: L7509MFG Part #: 8604-083 Compare
BARD MANUFACTURING COMPANY INC
SEP100AN.jpg195,000 BTU Commercial Unit Heater
Locke Part #: L6243MFG Part #: SEP200AN Compare
Gas: Natural gas, Power: 115V /1ph / 60Hz, Dimensions Height x Width x Depth (in): 32-3/16 x 23-1/8 x 31-5/16, Nominal Gas Heat Input: 195,000, Heat Exchanger: Aluminized steel, Flue Size Round (in): 5, Gas Piping Size (in, NPT): 1/2, Motor Full Load Amps: 2.1, Motor RPMs: 1075, Air Volume (CFM): 2200 Heating capacities from 100,000 400,000 BTUH., Up to 80.5% thermal efficiency, Stainless steel heat exchanger is available for longer product life., Heat exchangers are laboratory life-cycle tested., Sidewall venting eliminates roof penetrations., Wiring junction box is located outside of unit., Safe direct spark ignition. No standing pilot light., Self-diagnostic board with LED display improves troubleshooting efficiency and accuracy., 3/8 x 16 rivet nuts are located on the top of cabinet for suspending unit using threaded rod. ADVANCED DISTRIBUTOR PRODUCTS
L5570.jpg2" IPS Coupling
Locke Part #: L5574MFG Part #: 10005384 Compare
GEORG FISCHER CENTRAL PLASTICS
L5565.jpg2" IPS Elbow
Locke Part #: L5569MFG Part #: 10005366 Compare
GEORG FISCHER CENTRAL PLASTICS
L5590.jpg2" IPS End Cap
Locke Part #: L5594MFG Part #: 10005375 Compare
GEORG FISCHER CENTRAL PLASTICS
Product Image Not Available2" IPS Tee
Locke Part #: L5579MFG Part #: 10005414 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg2" IPS x 1" IPS
Locke Part #: L5585MFG Part #: 10005398 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg2" IPS x 1-1/2" IPS
Locke Part #: L5587MFG Part #: 10005400 Compare
GEORG FISCHER CENTRAL PLASTICS
L5580.jpg2" IPS x 1-1/4" IPS
Locke Part #: L5586MFG Part #: 10005399 Compare
GEORG FISCHER CENTRAL PLASTICS
ADVANCED DISTRIBUTOR PRODUCTS
Tonnage: SM312410, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 30.0 x 22.0 x 18.75, Nominal MBTUH: 24, Slab: Aluminum, Electric Heat: 10 kW, Available Voltages: 208/240 V, 60 Hz, 1 Phase, Transformer Size and Type: 40VA, Class 2, Wheel (dia" x width"): 10 x 6, Nominal CFM: 800, Air Filter Size (in): 20 x 20 Patent pending flexible copper tubing for easy motor access, Low 30" height all models, all sizes., Cabinets constructed of heavy-gauge, corrosion-resistant galvanized steel, 5/8" foil-faced insulation for excellent sweat resistance and quiet operation., Refrigerant connections located on top left., (4) Screw removal for easy access to all electrical connections, Dual condensate drain connections on left side, right side, and bottom of cabinet., 1" duct flanges on all models simplify attachment to plenums such as 1 1/2" ductboard, Air filter included with every air handler; no tools required for changeout., Decorative wall panel (26 w x 38 h) or closet panel (24 w x 27 h) available as accessory; both panels reduce published sound level., Wall hanging bracket available as accessory for field installation, Approved for installation in manufactured housing and mobile homes., AC or HP applications; R-22 & R-410A compatible., Light weight aluminum evaporator coil with aluminum header plate; copper coil available., Field or factory installed threaded expansion valve., Corrosion proof plastic drain pan, 5-speed high efficiency ECM motor or PSC motor available., Easy to service electric heat section, 5, 7.5, or 10 kW heat kits standard factory installed on all models., Pull disconnect line voltage connection standard on all models, Patented condensate drain pan safety float switch available as accessory., Includes thermostat connections, time delay (1 sec. on, 45 sec. off), & motor speed settings (PSC motor uses control board; functions are built into the 5-speed ECM motor). ADVANCED DISTRIBUTOR PRODUCTS
Tonnage: SM312405, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 30.0 x 22.0 x 18.75, Nominal MBTUH: 24, Slab: Aluminum, Electric Heat: 5 kW, Available Voltages: 208/240 V, 60 Hz, 1 Phase, Transformer Size and Type: 40VA, Class 2, Wheel (dia" x width"): 10 x 6, Nominal CFM: 800, Air Filter Size (in): 20 x 20 Patent pending flexible copper tubing for easy motor access, Low 30" height all models, all sizes., Cabinets constructed of heavy-gauge, corrosion-resistant galvanized steel, 5/8" foil-faced insulation for excellent sweat resistance and quiet operation., Refrigerant connections located on top left., (4) Screw removal for easy access to all electrical connections, Dual condensate drain connections on left side, right side, and bottom of cabinet., 1" duct flanges on all models simplify attachment to plenums such as 1 1/2" ductboard, Air filter included with every air handler; no tools required for changeout., Decorative wall panel (26 w x 38 h) or closet panel (24 w x 27 h) available as accessory; both panels reduce published sound level., Wall hanging bracket available as accessory for field installation, Approved for installation in manufactured housing and mobile homes., AC or HP applications; R-22 & R-410A compatible., Light weight aluminum evaporator coil with aluminum header plate; copper coil available., Field or factory installed threaded expansion valve., Corrosion proof plastic drain pan, 5-speed high efficiency ECM motor or PSC motor available., Easy to service electric heat section, 5, 7.5, or 10 kW heat kits standard factory installed on all models., Pull disconnect line voltage connection standard on all models, Patented condensate drain pan safety float switch available as accessory., Includes thermostat connections, time delay (1 sec. on, 45 sec. off), & motor speed settings (PSC motor uses control board; functions are built into the 5-speed ECM motor). ADVANCED DISTRIBUTOR PRODUCTS
Tonnage: SM312407, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 30.0 x 22.0 x 18.75, Nominal MBTUH: 24, Slab: Aluminum, Electric Heat: 7.5 kW, Available Voltages: 208/240 V, 60 Hz, 1 Phase, Transformer Size and Type: 40VA, Class 2, Wheel (dia" x width"): 10 x 6, Nominal CFM: 800, Air Filter Size (in): 20 x 20 Patent pending flexible copper tubing for easy motor access, Low 30" height all models, all sizes., Cabinets constructed of heavy-gauge, corrosion-resistant galvanized steel, 5/8" foil-faced insulation for excellent sweat resistance and quiet operation., Refrigerant connections located on top left., (4) Screw removal for easy access to all electrical connections, Dual condensate drain connections on left side, right side, and bottom of cabinet., 1" duct flanges on all models simplify attachment to plenums such as 1 1/2" ductboard, Air filter included with every air handler; no tools required for changeout., Decorative wall panel (26 w x 38 h) or closet panel (24 w x 27 h) available as accessory; both panels reduce published sound level., Wall hanging bracket available as accessory for field installation, Approved for installation in manufactured housing and mobile homes., AC or HP applications; R-22 & R-410A compatible., Light weight aluminum evaporator coil with aluminum header plate; copper coil available., Field or factory installed threaded expansion valve., Corrosion proof plastic drain pan, 5-speed high efficiency ECM motor or PSC motor available., Easy to service electric heat section, 5, 7.5, or 10 kW heat kits standard factory installed on all models., Pull disconnect line voltage connection standard on all models, Patented condensate drain pan safety float switch available as accessory., Includes thermostat connections, time delay (1 sec. on, 45 sec. off), & motor speed settings (PSC motor uses control board; functions are built into the 5-speed ECM motor). ADVANCED DISTRIBUTOR PRODUCTS
CPL-coils-black.jpg2 X 20' CenFuse 160 PSI
Locke Part #: L5564MFG Part #: FUSE16002000020 Compare
Color: BLK, Size: 2, Diameter: 2", ID: 1.943", OD: 2.375", Wall: .216", Weight/feet: .627, Straight Lengths: 20’ Footage markings and product identification are clearly and permanently printed on the side of each coil., Centennial Geothermal Cenfuse pipe resists corrosion and abrasions, is flexible, and is thermally conductive., Coils are held securely together with plastic banding, stretch-wrapped and shipped on pallets for easier handling., Cenfuse pipe is available in multiple coil lengths, straight lengths and SDR s, and is designed for all types of fusion. Centennial Plast
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 5 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Input (Btuh): 110,000, Output (Btuh): 87,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 173, Cabinet Width (In): 21.0 Configurations, Downflow, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available ARMSTRONG AIR
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 3 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Input (Btuh): 66,000, Output (Btuh): 52,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 130, Cabinet Width (In): 14.5 Configurations, Downflow, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available ARMSTRONG AIR
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 4 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Downflow, Input (Btuh): 88,000, Output (Btuh): 69,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 153, Cabinet Width (In): 17.5 Configurations, Downflow, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available ARMSTRONG AIR
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 3 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 66,000, Output (Btuh): 52,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 128, Cabinet Width (In): 14.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available ARMSTRONG AIR
Voltage: 120/60/1, CFM: 3 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 3 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 15, Nominal FLA: 7.7, Trans (VA): 40, Approx Shipping Weight (Lbs): 143, Cabinet Width (In): 17.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available ARMSTRONG AIR
Voltage: 120/60/1, CFM: 4 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 4 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 154, Cabinet Width (In): 17.5 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available ARMSTRONG AIR
Voltage: 120/60/1, CFM: 5 Ton add on cooling, Stages: 2 Stage, Nominal Cooling Capacity: 5 tons, Blower: Variable Speed, Configuration: Communicating Enabled, Upflow/Horizontal, Input (Btuh): 88,000, Output (Btuh): 70,000, AFUE (ICS): 80.0%, Gas Inlet (In): 1/2, Max Time Delay Breaker or Fuse: 20, Nominal FLA: 12.8, Trans (VA): 40, Approx Shipping Weight (Lbs): 173, Cabinet Width (In): 21.0 Configurations, Upflow / Horizontal, Heat Exchanger Design, Aluminized crimped no-weld clam shell heat exchanger, Cabinet Design, Compact 33 height, Standardized widths for easy coil fit, Air Delivery System, ECM Variable speed blower motor, Easily removable slide out blower design, Controls, Communicating control enabled, Two stage gas valve, Thermostat flexibility - works with the Comfort Sync T-Stat or a conventional 24V T-Stat, Self diagnostics saves last 5 fault codes regardless of power interruption, Venting, Rotatable draft inducer for venting flexibility, Installation Features, Left and right utility connections, Removable floor base for bottom return air, "L" designated models comply with California's South Coast Air Quality Management district, Low NOx requirements, Zero step horizontal conversion, Warranty, 10 year limited parts warranty / lifetime heat exchanger warranty available ARMSTRONG AIR
Model: VC201B, Warranty: 1 Year Parts, 10 Year Heat Exchanger, No Labor, Color: Black, Type: Closed Front, Width: 24", Depth: 15-1⁄4", Height: 20", Weight (Lbs): 59, Vent Size: 3", Approx Shipping Weight: 59 lbs., Gas Type: Natural, Input (Btu/hr): 20,000, Control: Thermostat Bulb, Gas Inlet/Outlet Size: 1⁄2"- 3⁄8", Center of Vent to Floor: 16-1⁄4" Top Control provides no-stoop access for temperature selection, Unit Leveling Legs facilitate installation and compensate for uneven flooring., Thermostat Sensing Bulb monitors room temperature and maintains heat at desired setting., 100% Safety Pilot/Built-in Pressure Regulator cycles unit off in the event pilot flame is extinguished. Pressure regulator assures constant gas line pressure., Multi-Louvered Top directs warm air toward room. Assures maximum heat distribution., Continuous-Seam Welded, Combustion Chamber is durably constructed and assures maximum, rapid heat transfer. Warranted for 10 years (non pro-rated)., Matchless Spark Ignition eliminates the need for matches or lighting tools, Resettable Vent Spill Safety Device automatically shuts unit off in the event of flue blockage or incorrect vent installation. COZY HEATING 673154140009
L5003B.jpg20 Amp LCDI Power Cord for L5003
Locke Part #: L5008MFG Part #: RAK3203A Compare
GE APPLIANCE
RADIANT TUBE HEATERS.jpg20 Ft. Emissive Coated Tube Kit
Locke Part #: L5676MFG Part #: TS-1420-JZ Compare
SCHWANK USA INC
Voltage: 208-240, kw: 20 ARMSTRONG AIR
Voltage: 208-240, kw: 20 ARMSTRONG AIR
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.1/4, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 5.1, Current Rated/Max (A) - Heating: 7.0, Dimensions (Height x Width x Depth) - Outdoor: 24-7/16" x 31-1/8" x 11-7/16", EER: 12.5/11.3, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): -15~75, HSPF: 11.0, Net Weight - Outdoor (Lbs): 86, Noise Level dB(A) - Clg/Htg (Hi): 44/43, Noise Level dB(A) - Clg/Htg (Low): 31/29, Noise Level dB(A) - Clg/Htg (Med): 38/37, Noise Level dB(A) - Clg/Htg (Quiet): 23/23, Nominal Cooling (BTU/h): 14,200, Nominal Heating (BTU/h): 18,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 20.3 Outdoor Unit, 18,000 BTU/h Heating, 208-230 Volts, 4 Auto Speed, 14,200 BTU/h Cooling FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.1/4, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 5.1, Current Rated/Max (A) - Heating: 7.0, Dimensions (Height x Width x Depth) - Outdoor: 24-7/16" x 31-1/8" x 11-7/16", EER: 12.5/11.3, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): -15~75, HSPF: 11.2, Net Weight - Outdoor (Lbs): 86, Noise Level dB(A) - Clg/Htg (Hi): 44/43, Noise Level dB(A) - Clg/Htg (Low): 31/29, Noise Level dB(A) - Clg/Htg (Med): 38/37, Noise Level dB(A) - Clg/Htg (Quiet): 23/23, Nominal Cooling (BTU/h): 14,200, Nominal Heating (BTU/h): 18,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 20.3 FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 5.1, Current Rated/Max (A) - Heating: 7.0, EER: 12.5/11.3, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): -15~75, HSPF: 11.0, Noise Level dB(A) - Clg/Htg (Hi): 44/43, Noise Level dB(A) - Clg/Htg (Low): 31/29, Noise Level dB(A) - Clg/Htg (Med): 38/37, Noise Level dB(A) - Clg/Htg (Quiet): 23/23, Nominal Cooling (BTU/h): 14,200, Nominal Heating (BTU/h): 18,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 20.3, Conn Pipe Diameter (In) - Indoor: Suc. 1/2, Dimensions (Height x Width x Depth) - Indoor: 23-5/8" x 29-1/8" x 7-7/8", Net Weight - Indoor (Lbs): 31 Indoor Unit, 6 Auto Speed, 14,200 BTU/h Cooling, 18,000 BTU/h Heating, 208-230 Volts FUJITSU GENERAL AMERICA, INC
Duct Size: 20RD RSI's 510 SERIES concentric diffuser systems are designed to provide a single point air distribution system. The systems may be used with either a T-Bar ceiling or a plaster ceiling., Standard features include:, 1., All Aluminum diffuser with aluminum return air egg crate., 2., Built-in Anti-Sweat gasket., 3., Molded Fiberglass Transition (through five tons)., 4., Built-in hanging supports., 5., Diffuser box constructed of fiberglass duct board (through 7.5 tons) or sheet metal., Standard benefits include:, 1., Even four way airflow., 2., Factory assembled & sealed., 3., Guaranteed not to "sweat"., 4., Guaranteed not to recirculate air flow (short cycle)., 5., Return air egg crate is easily removed., 6., Units are fully insulated (both supply and return). RRS ROOFTOP SYSTEMS
Cabinet Color: Armstrong, Slab Number: Copper Slab, Metering Device: Non-Bleed A/C TXV (R-410A), Nominal MBTUH: 60, Cabinet Height: 21", Coil Type: Horizontal A-Coil ADVANCED DISTRIBUTOR PRODUCTS
Cabinet Color: Embossed, Slab Number: 35, Metering Device: Piston (R-410A), Dimensions Height x Width x Depth (in): 21.0 x Pan 17.0 x Pan 19.5, Nominal MBTUH: 48, Slab: Copper, Cabinet Upper Notch: Uncased Uncased coil, Right-hand service, with 410A piston, Anti-microbial drain pan with Microban ADVANCED DISTRIBUTOR PRODUCTS
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Liq. 1/4 x 3, Suc. 1/2 x 1, 3/8 x 2, Cooling Operating Range (°F): 14 to 115, Dimensions (Height x Width x Depth) - Outdoor: 32-11/16" x 35-7/16" x 13", EER: 13.3, Heating Operating Range (°F): -15 to 75, HSPF: 10.3, Net Weight - Outdoor (Lbs): 146, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 20, Connectable Indoor Unit Number: 2 to 3, Fan - Type x Quantity: Propeller x 1, Rated Capacity Cooling/Heating (BTU/h): 22,000/25,000, Sound Pressure Level Cooling - dB(A): 50, Sound Pressure Level Heating - dB(A): 52 FUJITSU GENERAL AMERICA, INC
Product Image Not Available22.5 kW Heat Strip for KHA, KCA
Locke Part #: L4311MFG Part #: 14W37 Compare
ALLIED AIR COMMERCIAL
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.1/4, Cooling Operating Range (°F): 14~115, Current Rated/Max (A) - Cooling: 4.2, Current Rated/Max (A) - Heating: 6.7, Dimensions (Height x Width x Depth) - Outdoor: 24-7/16" x 31-1/8" x 11-7/16", EER: 13.1/11.1, Fan Speeds Stage: 4+Auto, Heating Operating Range (°F): -15~75, HSPF: 11.3, Net Weight - Outdoor (Lbs): 86, Noise Level dB(A) - Clg/Htg (Hi): 40/40, Noise Level dB(A) - Clg/Htg (Low): 29/29, Noise Level dB(A) - Clg/Htg (Med): 35/35, Noise Level dB(A) - Clg/Htg (Quiet): 23/23, Nominal Cooling (BTU/h): 12,000, Nominal Heating (BTU/h): 16,000, Power Source (V/Hz/Phase): 208/230/60/1, SEER: 22.7 Outdoor Unit, 4 Auto Speed, 12,000 BTU/h Cooling, 16,000 BTU/h Heating, 208-230 Volts FUJITSU GENERAL AMERICA, INC
Refrigerant: R410A, Conn Pipe Diameter (In) - Outdoor: Dis.1/4, Cooling Op