Loading ...

Search in: Installation Material Category

Product Image Not Available 046 16X20X4 FILTER BOX
Locke Part #: L6168 MFG Part #: 0461620
CODY CO INC
Product Image Not Available 046 20X20X30 FILTER BX R6
Locke Part #: L6193 MFG Part #: 046R62020
CODY CO INC
052 1/4 FLR LIQUID LINE DRYER
Locke Part #: L1086 MFG Part #: A-18186
Capacities and selection recommendations Mueller Industries
052S 1/4 OD LIQUID LINE DRYER
Locke Part #: L1087 MFG Part #: A-18654
Capacities and selection recommendations Mueller Industries
054G UPFLOW FILTER BASE 14X25 4"HI
Locke Part #: L3988 MFG Part #: 054G14254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty. CODY CO INC
054G UPFLOW FILTER BASE 14X25 6"HI
Locke Part #: L3978 MFG Part #: 054G14256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
054G UPFLOW FILTER BASE 16X25 4"HI
Locke Part #: L3989 MFG Part #: 054G16254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty. CODY CO INC
054G UPFLOW FILTER BASE 16X25 6"HI
Locke Part #: L3979 MFG Part #: 054G16256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
054G UPFLOW FILTER BASE 20X25 4"HI
Locke Part #: L3991 MFG Part #: 054G20254
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty. CODY CO INC
054G UPFLOW FILTER BASE 20X25 6"HI
Locke Part #: L3981 MFG Part #: 054G20256
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
054G UPFLOW FILTER BASE 24X24 4"HI
Locke Part #: L3990 MFG Part #: 054G24244
Gas Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes., Heavy 22 gauge galvanized sheet metal has been die cut for smooth edges compared to competitor s products which have rough, unsafe edges, allowing for a smoother installation without injury., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Tabs have rounded corners as opposed to competitor s sharp corners, which lessens chances of dam-age in transit or installation injury., Mounting holes are provided for faster installation., Individually boxed for convenient shipping and warehousing., Allows for easy access to furnace filters - no panels or door to remove., Limited Lifetime Warranty. CODY CO INC
054G UPFLOW FILTER BASE 24X24 6"HI
Locke Part #: L3980 MFG Part #: 054G24246
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
055E UPFLOW FILTER BASE 14X20 4"HI
Locke Part #: L3992 MFG Part #: 055E14204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty. CODY CO INC
055E UPFLOW FILTER BASE 14X20 6"HI
Locke Part #: L3982 MFG Part #: 055E14206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
055E UPFLOW FILTER BASE 16X20 4"HI
Locke Part #: L3993 MFG Part #: 055E16204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty. CODY CO INC
055E UPFLOW FILTER BASE 16X20 6"HI
Locke Part #: L3983 MFG Part #: 055E16206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
055E UPFLOW FILTER BASE 20X20 4"HI
Locke Part #: L3994 MFG Part #: 055E20204
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty. CODY CO INC
055E UPFLOW FILTER BASE 20X20 6"HI
Locke Part #: L3984 MFG Part #: 055E20206
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
055E UPFLOW FILTER BASE 20X25 4"HI
Locke Part #: L3995 MFG Part #: 055E20254
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty. CODY CO INC
055E UPFLW FB(20X20) 3TR23X22 4"HI
Locke Part #: L3968 MFG Part #: 055E2322-3TR
CODY CO INC
055EN UPFLOW FILTER BASE 20X25 6" HI N
Locke Part #: L3985 MFG Part #: 055E20256N
Heavy 22 GA Construction, Fully hinged door with magnetic latch, Door features an integrated handle, Solid one piece wrap design, Mounting holes for easy installation, Removable rails for easy filter installtion, Made to fit all units through 5 tons, For residential and light commercial, Individually boxed for convenience, Limited Lifetime Warranty CODY CO INC
082 1/4 FLR LIQUID LINE DRYER
Locke Part #: L0901 MFG Part #: A-18188
Capacities and selection recommendations Mueller Industries
082S 1/4 OD LIQUID LINE DRYER
Locke Part #: L0902 MFG Part #: A18656
Capacities and selection recommendations Mueller Industries
083 3/8 FLR LIQUID LINE DRYER
Locke Part #: L1088 MFG Part #: A-18189
Capacities and selection recommendations Mueller Industries
083S 3/8 OD LIQUID LINE DRYER
Locke Part #: L1089 MFG Part #: A-18657
Capacities and selection recommendations Mueller Industries
Product Image Not Available 093PWC 4X5X4X10 DLSC LINESET COVER
Locke Part #: L7491 MFG Part #: 093PWC45410
CODY CO INC
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable CODY CO INC
Mueller Industries
1/2" Sweat Sight Glass
Locke Part #: L1034 MFG Part #: A-18115
Solid copper extended sweat fittings permit solder installation without disassembly., Flare models feature solid brass body and fittings., Compact design, low silhouette, short laying in length., U.L. listed for 2500 psig minimum bursting pressure., Extremely accurate. Mueller Industries
1/2" Sweat Sight Glass
Locke Part #: L1035 MFG Part #: A-18116
Solid copper extended sweat fittings permit solder installation without disassembly., Flare models feature solid brass body and fittings., Compact design, low silhouette, short laying in length., U.L. listed for 2500 psig minimum bursting pressure., Extremely accurate. Mueller Industries
Product Image Not Available 1/2" TO 3/8" REDUCER PZK-R86-HNBR
Locke Part #: L3955 MFG Part #: 770801
PARKER-HANNIFIN
1/2” x 1.5" x 10’ Formed Angle
Locke Part #: L6123 MFG Part #: 06341410
Standard 28 GA Galvanized Metal (26ga avail), All sold in 10 lengths with various widths, 10 pcs per bundle CODY CO INC
1/2 OD X 20 C/D CHARGED
Locke Part #: H0725 MFG Part #: AC03020
Mueller Industries
The ULl Listed and CSA Certified Parker Pre-Filter contains a special filtering media that maximizes removal of the following solid contaminants:, Aluminum and iron particles, Copper and iron oxides, Metal chips, Varnish, Burrs, Flux, Dirt, Filter area, : 4.28 square inches, Filtration, : 15 microns, For Refrigerant Recovery, Recycle, & Reclaim, Note: The Parker Pre-Filter is for temporary use only and should be changed after you service a maximum of 8 12 systems. Change out may be needed sooner depending on actual system conditions PARKER-HANNIFIN
The ULl Listed and CSA Certified Parker Pre-Filter contains a special filtering media that maximizes removal of the following solid contaminants:, Aluminum and iron particles, Copper and iron oxides, Metal chips, Varnish, Burrs, Flux, Dirt, Filter area, : 4.28 square inches, Filtration, : 15 microns, For Refrigerant Recovery, Recycle, & Reclaim, Note: The Parker Pre-Filter is for temporary use only and should be changed after you service a maximum of 8 12 systems. Change out may be needed sooner depending on actual system conditions PARKER-HANNIFIN
Mueller Industries
1/4" Sweat Sight Glass
Locke Part #: L1033 MFG Part #: A-18114
Solid copper extended sweat fittings permit solder installation without disassembly., Flare models feature solid brass body and fittings., Compact design, low silhouette, short laying in length., U.L. listed for 2500 psig minimum bursting pressure., Extremely accurate. Mueller Industries
1/4 CXC 90 ELL
Locke Part #: H0001 MFG Part #: 607-1/4
Mueller Industries
1/4 ID 3/8 OD CXC 90 ELL LR
Locke Part #: H0017 MFG Part #: 607LT 1/4
Mueller Industries
1 1/8OD X20 C/D CHARGED
Locke Part #: H0727 MFG Part #: AC10020
Mueller Industries
1 3/8OD X20 C/D CHARGED
Locke Part #: H0728 MFG Part #: AC12020
Mueller Industries
1 5/8OD X20 C/D CHARGED
Locke Part #: H0729 MFG Part #: AC14020
Mueller Industries
1 ID 1 1/8 OD CXC 90 ELL LR
Locke Part #: H0023 MFG Part #: 607-LT 1"
Mueller Industries
1 ID 1 1/8 OD CXC 90 ST EL LR
Locke Part #: H0041 MFG Part #: 607-2LT 1"
Mueller Industries
Mueller Industries
Product Image Not Available 1-1/8" TO 3/4" REDUCER PZK-R1812-HNBR
Locke Part #: L3960 MFG Part #: 770806
PARKER-HANNIFIN
Product Image Not Available 1-1/8" TO 7/8" REDUCER PZK-R1814-HNBR
Locke Part #: L3961 MFG Part #: 770807
PARKER-HANNIFIN
1-3/4" x 100 yards- Black 24 Rolls
Locke Part #: M0081 MFG Part #: PS134B
Webbed duct strap possessing high tensile and abrasion resistant. Chemical resistant. Use for flex duct - easy to cut and staple to joists. CAMBRIDGE RESOURC
115V Pump
Locke Part #: L0944 MFG Part #: 553455
For intermittent operation, maximum 50% duty cycle, Condensate produced in application must be no more than half the pump's flow rate for any given head, Use with most mini-split air conditioning units up to 25,000 BTU/hr, Self-priming pump, Includes:, safety switch, suction tubing, vent tubing and drain tubing, and tubing adapter LITTLE GIANT
120V 100FT Pre-assembled Heating Cable
Locke Part #: L8167 MFG Part #: 974259-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
120V 12FT Pre-assembled Heating Cable
Locke Part #: L8162 MFG Part #: 717625-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
120V 18FT Pre-assembled Heating Cable
Locke Part #: L8163 MFG Part #: 206323-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
120V 24FT Pre-assembled Heating Cable
Locke Part #: L8164 MFG Part #: 517477-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
120V 4FT Crankcase Heater
Locke Part #: L8172 MFG Part #: 342903-000
Reliable peak heating during critical cold periods and reduced heating once the compressor starts up or the air temperature rises. PENTAIR THERMAL MANAGEMENT LLC
120V 50FT Pre-assembled Heating Cable
Locke Part #: L8165 MFG Part #: 003063-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
120V 6FT Pre-assembled Heating Cable
Locke Part #: L8161 MFG Part #: 902367-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
120V 75FT Pre-assembled Heating Cable
Locke Part #: L8166 MFG Part #: 286609-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
13' Heat Cable
Locke Part #: L8192 MFG Part #: 31013
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310135
Product Image Not Available 15" FLEX DUCT SADDLE
Locke Part #: L6120 MFG Part #: L6120
CODY CO INC
15' Heat Cable
Locke Part #: L8193 MFG Part #: 31015
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310159
1 Flange on All Four Sides for Easy Attachment, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Available Lined or Unlined- Must Specify the R Value of Liner, Standard Height 30 Unless Otherwise Specified CODY CO INC
163 3/8 FLR LIQUID LINE DRYER
Locke Part #: L0903 MFG Part #: A-18192
Capacities and selection recommendations Mueller Industries
Capacities and selection recommendations Mueller Industries
164 1/2 FLR LIQUID LINE DRYER
Locke Part #: L0905 MFG Part #: A-18193
Capacities and selection recommendations Mueller Industries
164S 1/2 OD LIQUID LINE DRYER
Locke Part #: L0906 MFG Part #: A-18700
Capacities and selection recommendations Mueller Industries
165S 5/8 OD LIQUID LINE DRYER
Locke Part #: L1000 MFG Part #: A-18701
Capacities and selection recommendations Mueller Industries
18"ID x 1/2" Self Seal Insulation
Locke Part #: L2503 MFG Part #: SST11812
Designed for insulating liquid cooling and heating lines. 25/50 rated flexible elastomeric thermal insulation, effectively retards the flow of moisture vapor, self seal., UV Resistant Armacell
18' Heat Cable
Locke Part #: L0586 MFG Part #: 31018
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310180
18 X 46 PLASTIC DRAIN PAN
Locke Part #: L2406 MFG Part #: 6-1846S
New rolled edges for durability, New ribbed bottoms for rigidity, New reinforced corners for strength, 3/4" PVC fittings attached to each pan, No seams - no rust - no leakage, Five pans per master carton, Complies with Southern Building Code No.94167, L = Drain Line Outlets in Long Side, S = Drain Line Outlets in Short Side, Southern Building Code #94167, Depth=2 DiversiTech Corp
1Gal. CCWI-181 Duct Sealant
Locke Part #: M6001 MFG Part #: AS22-1GRAY
POLYMER
2" x 55 mm Black Cloth Duct Tape
Locke Part #: L0444 MFG Part #: 200546
General purpose cloth duct tape, available in a wide variety of colors, used for packaging, bundling, sealing, seaming, holding, waterproofing, plumbing, carpet, color coding, splicing, and other home and general repairs SHURTAPE TECHNOLOGIES, INC
2-1/2” Wall Sleeve
Locke Part #: L6691 MFG Part #: 230-WS2 599600054
Wall sleeves and penetration covers are used to transition from the SpeediChannel system to a, through wall penetration. SPEEDY DUCT
20" Duct Strap Saddle
Locke Part #: L6121 MFG Part #: 072620
Standard 28 GA Galvanized Metal, Available in 6 x20 and 6 x30 CODY CO INC
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal CODY CO INC
230V Pump
Locke Part #: L0935 MFG Part #: 553458
For intermittent operation, maximum 50% duty cycle, Condensate produced in application must be no more than half the pump's flow rate for any given head, Use with most mini-split air conditioning units up to 25,000 BTU/hr, Self-priming pump, Includes:, safety switch, suction tubing, vent tubing and drain tubing, and tubing adapter LITTLE GIANT
24' Heat Cable
Locke Part #: L0589 MFG Part #: 31024
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310241
240V 12FT Pre-assembled Heating Cable
Locke Part #: L8169 MFG Part #: 120247-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
240V 18FT Pre-assembled Heating Cable
Locke Part #: L8170 MFG Part #: 119455-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
240V 24FT Pre-assembled Heating Cable
Locke Part #: L8171 MFG Part #: 659435-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
240V 4FT Crankcase Heater
Locke Part #: L8173 MFG Part #: 864811-000
Reliable peak heating during critical cold periods and reduced heating once the compressor starts up or the air temperature rises. PENTAIR THERMAL MANAGEMENT LLC
240V 6FT Pre-assembled Heating Cable
Locke Part #: L8168 MFG Part #: 277731-000
Intended for metal or plastic water pipes for freeze protection in residential and commercial applications. Gardian 120 volt heating cables come complete with a 30-inch power cord and plug. Gardian 240 volt heating cables are hard-wired. PENTAIR THERMAL MANAGEMENT LLC
Electric Air-Tite Housing For 1 or 2 Filters, Fully hinged door with magnetic latch and integrated handle offers a much tighter seal over competitor products, eliminating air and debris from entering the filter box from surrounding area., Removable rails are easy to change to accommodate different filter sizes, Individually boxed for convenient shipping and warehousing., Solid one piece wrap cabinet design is spot welded and riveted for sturdiness and long life, differing from competitor s products which are screwed together., Mounting holes are provided for faster installation., Allows for easy access to furnace filters - no panels or door to remove, Limited Lifetime Warranty. CODY CO INC
26 Gauge, 1-1/2" x 100’ Roll
Locke Part #: M0079 MFG Part #: HS100-26 14311
METAL PRODUCTS CO
Designed for use on Class 1 Flex Duct for connecting, joining, sealing and patching flexible air ductwork. UL 181B-FX listed. Colors: metalized silver with red print and black with white print. SHURTAPE TECHNOLOGIES, INC
3" x 100 Yards Silver
Locke Part #: M0069 MFG Part #: PS3S
Webbed duct strap processing high tensile and abrasion resistance. Chemical resistant. Use for flex duct. Easy to cut and staple to joists. CAMBRIDGE RESOURC
26GA Galvanized or Paint Grip, Available with cap, Easy Mounting Flange CODY CO INC
3' Heat Cable
Locke Part #: L1330 MFG Part #: 31003
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310036
3/16 Urethane x 1/2" Wide x 50’
Locke Part #: L0503 MFG Part #: DRUF3-12
Priced Per Roll CAIN MFG. CO INC
3/4" 54 oz. Cap. Suction Accumulators
Locke Part #: L3073 MFG Part #: 470093
PARKER-HANNIFIN
Mueller Industries
Product Image Not Available 3/4" TO 5/8" REDUCER PZK-R1210-HNBR
Locke Part #: L3957 MFG Part #: 770803
PARKER-HANNIFIN
3/4" x 10’ Perforated, 28 Gauge
Locke Part #: M0090 MFG Part #: PT26 10 FOOT
METAL PRODUCTS CO
3/4" x 100’ Perforated,28 Gauge
Locke Part #: M0091 MFG Part #: PT26 100 FOOT
METAL PRODUCTS CO
3/4 ID 7/8 OD CXC 90 ELL LR
Locke Part #: H0022 MFG Part #: 607-LT 3/4"
Mueller Industries
3/4 ID 7/8 OD CXC 90 ST EL LR
Locke Part #: H0040 MFG Part #: 607-2LT-3/4
Mueller Industries
3/4 OD X 20 C/D CHARGED
Locke Part #: H0726 MFG Part #: AC05020
Mueller Industries
3/8" Dial Damper Blade Hardware
Locke Part #: L0501 MFG Part #: DHDS38
End Bearings, Dials & Quadrants. For dampers up to 20" Diameter. Zinc plated. 100 count. CAIN MFG. CO INC
3/8" M x F Flare Sight Glass
Locke Part #: L3069 MFG Part #: 700093-001
Solid copper extended sweat fittings permit solder installation without disassembly., Flare models feature solid brass body and fittings., Compact design, low silhouette, short laying in length., U.L. listed for 2500 psig minimum bursting pressure., Extremely accurate. PARKER-HANNIFIN
3/8" Male Flare Sight Glass
Locke Part #: L1031 MFG Part #: 700079-001
Solid copper extended sweat fittings permit solder installation without disassembly., Flare models feature solid brass body and fittings., Compact design, low silhouette, short laying in length., U.L. listed for 2500 psig minimum bursting pressure., Extremely accurate. PARKER-HANNIFIN
100 percent copper sweat or nickel plated flare fittings, Desiccant core provides removal of solid contaminants, acid and moisture, Core is cushioned in fiber gaskets for protection and trouble-free performance, Powder paint coating surpasses 500 hour ASTM salt spray test and resists corrosion, U.L. and ULc Listed Guide SMGT-File No.SA-1756A & B Mueller Industries
Mueller Industries
3/8 OD X 20 C/D CHARGED
Locke Part #: H0724 MFG Part #: AC02020
Mueller Industries
Product Image Not Available 3/8 TO 1/4 REDUCER PZK-R64-HNBR
Locke Part #: L3954 MFG Part #: 770800
PARKER-HANNIFIN
30" Duct Strap Saddle
Locke Part #: L6122 MFG Part #: 072630
Standard 28 GA Galvanized Metal, Available in 6 x20 and 6 x30 CODY CO INC
Apollo America 814498020163
Apollo America 814498020156
30" x 30" Bottom Outlet Drain Pan Center
Locke Part #: L6112 MFG Part #: 060B3030
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable CODY CO INC
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable CODY CO INC
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable CODY CO INC
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable CODY CO INC
Galvanized Construction, One Piece Construction (No Sealer Needed), Folded Corners to Achieve a Water Proof Seal, Hemmed Edges for Added Stability, 3/4" PVC Drain Fitting, 060 Drain Location, Center, Short Side, 060L Drain Location, Center, Long Side, 2-1/2" Deep Tappered Pan, Easily Stackable CODY CO INC
30' Heat Cable
Locke Part #: L8194 MFG Part #: 31030
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310302
30 Gauge, 1-1/2" x 100’ Roll
Locke Part #: M0080 MFG Part #: HS100 14310
METAL PRODUCTS CO
30 VAC MAGNETIC TEST LEADS
Locke Part #: T2614 MFG Part #: MAG1YL
SEALED UNIT PARTS CO., INC 855232004001
Product Image Not Available 303 3/8 FLR LIQUID LINE DRYER
Locke Part #: L1090 MFG Part #: 303
PARKER-HANNIFIN
304 1/2 FLR LIQUID LINE DRYER
Locke Part #: L1091 MFG Part #: A-18196
Capacities and selection recommendations Mueller Industries
304S 1/2 OD LIQUID LINE DRYER
Locke Part #: L1092 MFG Part #: A-18742
Capacities and selection recommendations Mueller Industries
305 5/8 FLR LIQUID LINE DRYER
Locke Part #: L1093 MFG Part #: A-18197
Capacities and selection recommendations Mueller Industries
305S 5/8 OD LIQUID LINE DRYER
Locke Part #: L1094 MFG Part #: A-18743
Capacities and selection recommendations Mueller Industries
36" Fits to 10" Flexible Duct Clamps
Locke Part #: L0526 MFG Part #: L36175-9-L - CT36-175K9B
CAMBRIDGE RESOURC 680183103639
36" Fits to 10" Flexible Duct Clamps, Black
Locke Part #: L0527 MFG Part #: L36-175-OL
CAMBRIDGE RESOURC 680183103646
36 x 36 Bottom Outlet Drain Pan
Locke Part #: L6079 MFG Part #: 0603636
CODY CO INC
36 x 72 Bottom Outlet Drain Pan
Locke Part #: L6080 MFG Part #: 060L3672
CODY CO INC
4" x 6.5’ SpeediChannel™
Locke Part #: L6685 MFG Part #: 599600002
The SpeediChannel is rigid natural color PVC, the SpeediChannel system is that can be painted as desired to match any wall color. It is resistant to UV light and is UL rated. SPEEDY DUCT
4” 45º Flat Bend
Locke Part #: L6692 MFG Part #: 599600018 230-FB454
Furnished with stainless steel screws. SPEEDY DUCT
4” 90° Long Radius Bend
Locke Part #: L6687 MFG Part #: 599600015 230-LFB4
Furnished with stainless steel screws. SPEEDY DUCT
4” 90º Inside Elbow for Inside Corners
Locke Part #: L6688 MFG Part #: 599600024 230-EB4
Furnished with stainless steel screws. SPEEDY DUCT
4” 90º Outside Elbow for Outside Corners
Locke Part #: L6689 MFG Part #: 599600021
Furnished with stainless steel screws. SPEEDY DUCT
4” Flex Joint
Locke Part #: L6693 MFG Part #: 599600032 230-FJ4
Does NOT require the use of a union coupling. SPEEDY DUCT
4” Penetration Cover
Locke Part #: L6690 MFG Part #: 59960009 230-WC4
Wall sleeves and penetration covers are used to transition from the SpeediChannel system to a, through wall penetration. SPEEDY DUCT
4” Union Coupling
Locke Part #: L6686 MFG Part #: 599600027 230-CP4
Furnished with stainless steel screws. SPEEDY DUCT
4” Wall Escutcheon
Locke Part #: L6694 MFG Part #: 599600042 230-FR4
Typically used to cover a rough opening in a soffit, wall, or ceiling penetration. SPEEDY DUCT
415 5/8 FLR LIQUID LINE DRYER
Locke Part #: L1096 MFG Part #: A-18200
Capacities and selection recommendations Mueller Industries
48" Fits to 14" Flexible Duct Clamps
Locke Part #: L0525 MFG Part #: L48175-8-L
CAMBRIDGE RESOURC 680183103653
48" x 48" x 3" Ultralight Pad
Locke Part #: L0676 MFG Part #: UC4848-3
Textured surface prevents unit slide and allows water drainage., Amazingly tough fiber-cement composite stops cracks and breaks with excellent flexing qualities., EPS core dampens vibration, conforms to uneven ground, and prevents mold and fungus. DiversiTech Corp
Apollo America 814498020170
Apollo America 814498020187
Mueller Industries
5/8" 35 oz. Cap. Suction Accumulators
Locke Part #: L3072 MFG Part #: PA3060-10-5
PARKER-HANNIFIN
Mueller Industries
Product Image Not Available 5/8" TO 1/2" REDUCER PZK-R108-HNBR
Locke Part #: L3956 MFG Part #: 770802
PARKER-HANNIFIN
5/8 CXC 90 ELL
Locke Part #: H0004 MFG Part #: 607-I 5/8
Mueller Industries
5/8 ID 3/4 OD CXC 90 ELL LR
Locke Part #: H0021 MFG Part #: 607-LT 5/8"
Mueller Industries
5/8 ID 3/4 OD CXC 90 ST EL LR
Locke Part #: H0039 MFG Part #: 607-2LT-5/8"
Mueller Industries
5/8 ID 3/4 OD CXC COUPLING
Locke Part #: H0149 MFG Part #: 600-5/8
Mueller Industries
5/8 OD X 20 C/D CHARGED
Locke Part #: H0722 MFG Part #: AC04020
Mueller Industries
520 Adhesive Pint
Locke Part #: L4960 MFG Part #: AAD520003
Armacell 803014111195
520 Adhesive Quart
Locke Part #: L4961 MFG Part #: AAD520005
Armacell 803014111218
LITTLE GIANT
LITTLE GIANT
6' Heat Cable
Locke Part #: L0585 MFG Part #: 31009
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310098
6' Heat Cable
Locke Part #: L8191 MFG Part #: 31006
Approved for use on PVC, Copper or steel. With thermostat and pilot light for no-freeze water pipe protection. Pilot light glows when the thermostat has turned tape on. Turns on automatically at 38 . WRAP-ON CO INC 37841310067
6’ x 4" Tall Pitch Pan
Locke Part #: L6124 MFG Part #: 0902644
26GA Galvanized Metal, Easy Mounting Flange CODY CO INC
" OD discharge. LITTLE GIANT
7/8" 86 oz. Cap. Suction Accumulators
Locke Part #: L3074 MFG Part #: 470111
PARKER-HANNIFIN
Mueller Industries
Product Image Not Available 7/8" TO 3/4" REDUCER PZK-R1412-HNBR
Locke Part #: L3959 MFG Part #: 770805
PARKER-HANNIFIN
Product Image Not Available 7/8" TO 5/8" REDUCER PZK-R1410-HNBR
Locke Part #: L3958 MFG Part #: 770804
PARKER-HANNIFIN
7/8" x 1" Self Seal Insulation
Locke Part #: L2488 MFG Part #: DGS7810
Armacell
7/8 OD X 20 C/D CHARGED
Locke Part #: H0723 MFG Part #: AC06020
Mueller Industries
A19BBC-2 TEMPERATURE CONTROL
Locke Part #: L4565 MFG Part #: A19BBC-2
Neuco Inc
AC Accoflex Tubing
Locke Part #: L2464 MFG Part #: ACT01412
Commonly used for Ductless Mini Splits Armacell 803014136617
AF 100 SIL-2-1/2IN X 60YD-16 RLS/CS-H/A
Locke Part #: L0494 MFG Part #: 155206
BOCA Code Approved. Joins and seals fiberglass ductboard and Class 1 Flex Duct. Air-tight seal. UL-181A-P/B-FX listed. SHURTAPE TECHNOLOGIES, INC 40074019416
SHURTAPE TECHNOLOGIES, INC 40074024076
AF 975 SIL-48MM X 46M-24 RLS/CS-H/A
Locke Part #: L0492 MFG Part #: 232032
2.0 mil foil, UL 723 listed, cold temperature acrylic adhesive, provides an air tight seal in vast temperature ranges and used for joining and sealing aluminum backed or fibrous insulation and metal duct. SHURTAPE TECHNOLOGIES, INC 40074022232
AF 975 SIL-72MM X 46M-16 RLS/CS-H/A
Locke Part #: L0480 MFG Part #: 232035
2.0 mil foil, UL 723 listed, cold temperature acrylic adhesive, provides an air tight seal in vast temperature ranges and used for joining and sealing aluminum backed or fibrous insulation and metal duct. SHURTAPE TECHNOLOGIES, INC 40074022249
AF 984 SIL-48MM X 46M-24 RLS/CS-H
Locke Part #: L0499 MFG Part #: 232033
FSK foil, UL 723 listed cold temperature acrylic adhesive, provides an air tight seal in vast temperature ranges and used for sealing seams in scrim reinforced duct insulation. Used where maximum strength tape is needed. SHURTAPE TECHNOLOGIES, INC 40074022263
AF 984 SIL-72MM X 46M-16 RLS/CS-S
Locke Part #: L0467 MFG Part #: 232036
FSK foil, UL 723 listed cold temperature acrylic adhesive, provides an air tight seal in vast temperature ranges and used for sealing seams in scrim reinforced duct insulation. Used where maximum strength tape is needed. SHURTAPE TECHNOLOGIES, INC 40074022270
Designed for insulating liquid cooling and heating lines. 25/50 rated flexible elastomeric thermal insulation, effectively retards the flow of moisture vapor, self seal., UV Resistant Armacell 803014143806
Designed for insulating liquid cooling and heating lines. 25/50 rated flexible elastomeric thermal insulation, effectively retards the flow of moisture vapor, self seal., UV Resistant Armacell 803014143844
Designed for insulating liquid cooling and heating lines. 25/50 rated flexible elastomeric thermal insulation, effectively retards the flow of moisture vapor, self seal., UV Resistant Armacell 803014143738
Designed for insulating liquid cooling and heating lines. 25/50 rated flexible elastomeric thermal insulation, effectively retards the flow of moisture vapor, self seal., UV Resistant Armacell 803014143745
Designed for insulating liquid cooling and heating lines. 25/50 rated flexible elastomeric thermal insulation, effectively retards the flow of moisture vapor, self seal., UV Resistant Armacell 803014143752
AP Armaflex Tape 1/8" x 2" x 30'
Locke Part #: M1049 MFG Part #: TAP18230
Provides a fast, easy method of insulating pipes & fittings. It is used to control condensation drip & reduce heat loss Armacell 803014123310
SEALED UNIT PARTS CO., INC
BF083S 3/8 BI-FLOW LIQUID DRYR
Locke Part #: L0309 MFG Part #: A-18657
Mueller Industries
BF084S 1/2 BI-FLOW LIQUID DRYR
Locke Part #: L0310 MFG Part #: A-18658
Mueller Industries
POLYMER
Product Image Not Available CADS-1WHIT 1 GAL FIBER REINFORCED DUCT SEALANT
Locke Part #: M6004 MFG Part #: CADS-1WHITE
POLYMER
Charge-O-Valve, Add-O-Valve
Locke Part #: L4435 MFG Part #: 032133-02
Moisture Magnet, Used With Home Refrigerators, Freezers, Small Commercial Units And Air Conditioners. Mms-200 Is Non-Directional, Can Be Used In Either Direction., Charge-O-Valve, Add-O-Valve, Designed For Evacuating & Charging Refrigeration Systems, These Dryers Are Approved For Systems Not Originally Equipped With High Side Valve Bodies. Gauges Attach To High And Low Sides., Little Giant Molecular Sieve, A Small General Purpose Dryer For Field Service Work. Install On Hermetic And Open Type Units. Up To 1/3 Hp With R-12, 1/2 Hp With R 22., Hercules Heavy Duty, For Air Conditioners, Large Freezers, Food Cases Up To 2 Tons. Eliminates Freeze-Up Hazards Caused By Foreign Materials. Dual Screen Action Construction Over 6 Square Inches Filtering Area. High Water Capacity For Heavy Duty Applications. PARKER-HANNIFIN
Marked to meet code requirements. SHURTAPE TECHNOLOGIES, INC
CONDENSATE DRAIN BLOW OUT VALVE
Locke Part #: L5133 MFG Part #: JV1
SEALED UNIT PARTS CO., INC 793573162670
Condensate Pump
Locke Part #: L0927 MFG Part #: 550521
LITTLE GIANT
Condensate Pump
Locke Part #: L0945 MFG Part #: 554550
Includes 20' of 3/8" ID tubing, Safety switch, UL / CSA listed, Stainless steel shaft, 3 inlet drain holes, 1/30 HP high performance motor, ABS tank, motor cover, and volute, 1/2 gallon tank capacity, Removable 3/8 barbed check valve, Thermal overload protection LITTLE GIANT
Condensate Pump
Locke Part #: L0991 MFG Part #: 554200
1/30 HP motor, 6' power cord LITTLE GIANT
COPPER DRIER
Locke Part #: L4437 MFG Part #: SUD115
SEALED UNIT PARTS CO., INC 687152032747
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, Uses, - Split System Air Conditioning, Chilled Water Systems, Warm Water System, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects., Standard Linesets, Temper:, 050-060 (soft anneal) Annealed to customer specification, Specifications:, Currently there is no ASTM specification for insulated copper tube, End Finishing:, Swaged end 90 degree bend Plain end Mueller Industries
Self Adhesive Is Easy To Apply; For Cold Application, Stops Condensation and Sweating, Insulates Pipe and Copper Tubing, Tees, Valves and Fittings VAPCO PRODUCTS INC
DC 181 MPT-48MM X 110M-24 RLS/CS-S
Locke Part #: L0446 MFG Part #: 1644686
Designed for use on Class 1 Flex Duct for connecting, joining, sealing and patching flexible air ductwork. UL 181B-FX listed. Colors: metalized silver with red print and black with white print. SHURTAPE TECHNOLOGIES, INC 40074021792
DFA-200 DNFLW FILTER BASE F/14.5" FURN
Locke Part #: L2989 MFG Part #: DFA-200
No Furnace panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
No Furnace panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
DFA-400 DNFLW FILTER BASE F/22" FURN
Locke Part #: L2990 MFG Part #: DFA-400
No Furnace panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
DFA-500 DNFLW FILTER BASE F/26.5" FURN
Locke Part #: L2991 MFG Part #: DFA-500
No Furnace panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
White-Rodgers
METAL PRODUCTS CO
Dual Fuel Control
Locke Part #: L2019 MFG Part #: BPC-1
BP PORTER INC
Product Image Not Available DUCT SEALANT UL181 WHITE AIRSEAL 1-GALLON
Locke Part #: M6002 MFG Part #: AS22-1 WHITE
POLYMER
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
Quick, efficient and economical field installation, Increased system efficiency using factory applied insulation, Correct lengths for reducing waste, Quality, consistency and economy, All Cerro Set tubing tested in accordance with ASTM E243 and provided with no detectable defects Mueller Industries
No Furnace panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/14X20 FC
Locke Part #: L2988 MFG Part #: EZ1420-FC
Lift Access Door - Remove Filter, No Unit Panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/14X25X1
Locke Part #: L2996 MFG Part #: EZ-1425
Lift Access Door - Remove Filter, No Furnace Panels or Door To Remove, Use Standard Size Filter, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Accepts 1" or 2" Filter, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/16X20X1 FC
Locke Part #: L2993 MFG Part #: EZ1620-FC
Lift Access Door - Remove Filter, No Unit Panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/16X25X1
Locke Part #: L2997 MFG Part #: EZ-1625
Lift Access Door - Remove Filter, No Furnace Panels or Door To Remove, Use Standard Size Filter, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Accepts 1" or 2" Filter, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/20X20X1 FC
Locke Part #: L2994 MFG Part #: EZ2020-FC
Lift Access Door - Remove Filter, No Unit Panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/20X25 FC
Locke Part #: L2995 MFG Part #: EZ2025FCN
Lift Access Door - Remove Filter, No Unit Panels or Door To Remove, Use Standard Size Filters, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/20X25X1
Locke Part #: L2998 MFG Part #: EZ-2025
Lift Access Door - Remove Filter, No Furnace Panels or Door To Remove, Use Standard Size Filter, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Accepts 1" or 2" Filter, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
EZ FILTER BASE F/24X24X1
Locke Part #: L2999 MFG Part #: EZ-2424
Lift Access Door - Remove Filter, No Furnace Panels or Door To Remove, Use Standard Size Filter, Keeps Evaporator Coils Clean, More Efficient - Heating and Cooling, Customized Professional Installations, Creates Customer Referrals, Accepts 1" or 2" Filter, Filter Not Included., Suitable for use with Disposable or Electrostatic Washable Type Filters. E Z FILTER BASE
COZY HEATING
Fits 1" Copper, 3/4" Iron, 3/4" PVC
Locke Part #: L2480 MFG Part #: 50144
Blocks heat loss/gain to save energy, use on hot or cold pipes. Stops condensation to prevent water damage. Order/ Sell by package, 1 package = 12'.1.75 R value. M-D BUILDING PRODUCTS
Fits 1/2" Copper, 3/8" Iron, 3/8" PVC
Locke Part #: L2482 MFG Part #: 50140
Blocks heat loss/gain to save energy, use on hot or cold pipes. Stops condensation to prevent water damage. Order/ Sell by package, 1 package = 12'.1.75 R value. M-D BUILDING PRODUCTS
Fits 3/4" Copper, 1/2" Iron, 1/2" PVC
Locke Part #: L2479 MFG Part #: 50142
Blocks heat loss/gain to save energy, use on hot or cold pipes. Stops condensation to prevent water damage. Order/ Sell by package, 1 package = 12'.1.75 R value. M-D BUILDING PRODUCTS
FLAME SENSOR CLEANER
Locke Part #: T2615 MFG Part #: FSC10
SEALED UNIT PARTS CO., INC 687152226412
Flexible Duct Elbow, 4"-16"
Locke Part #: L7270 MFG Part #: FLEX RIGHT FLEXIBLE DUCT
M & M MFG
Flow Meter, 1-17 GPM, 1" FPT
Locke Part #: L5524 MFG Part #: 8603-017
BARD MANUFACTURING COMPANY INC
Self Adhesive Is Easy To Apply, Paintable, Won t Shrink, Dry Out or Pull Away, Won t Harden or Crack VAPCO PRODUCTS INC
Designed to help meet local ventilation codes and standards, including ASHRAE 62.2-2010 standard, Ventilation and Acceptable Indoor Air Quality in Low-Rise Residential Buildings., Smart Control optimizes air delivery by syncing ventilation calls with heating/cooling, Easy-to-use input dials allow customized ventilation for each installation, Test mode that includes immediate feedback to installer to confirm that air delivery requirements of selected ventilation standard are being met., Economical supply-only ventilation; works with forced air system, Can be used with other equipment, such as an HRV/ ERV, for balanced ventilation., Y8150 Includes:, W8150A Fresh Air Ventilation Control, EARD6 Fresh Air Damper, AT120B Transformer, Mounting hardware for control, Homeowner information label Honeywell
Frostex Application Tape
Locke Part #: L8155 MFG Part #: 608289-000
PENTAIR THERMAL MANAGEMENT LLC
Frostex Flexfit Plug Kit
Locke Part #: L8154 MFG Part #: 382471-000
PENTAIR THERMAL MANAGEMENT LLC
G-23MM Dual Voltage Coil
Locke Part #: L3095 MFG Part #: 77360
Two-way solenoid valves can be used on either low or, high pressure. The smaller valves are direct acting while the larger valves are pilot operated. Normally closed. Coils are designed for continuous duty. They can remain energized continuously without damage from, overheating or mechanical failure., Pipe Size, 3/4" / 3/4, Orifice, 3/4" / 3/4, CV, 5.00 / 7.40, Minimum PSI, 0 / 1, Max., PSI, Air Inert Gas:, 125 / 150, Water, 125 / 150, Light Oil 300 SSU:, -/150, Maximum Temp., 180, / 225 PARKER-HANNIFIN
COZY HEATING
General Cloth, Nonprint White 3" x 60 yds; 16/case
Locke Part #: L0468 MFG Part #: 200544 WHI 72MM X
Used to seal cartons, bind books, repair seats, bundle wires, color code, splice, repair. Use as a condensation barrier in appliance assemblies. Tested in accordance with UL, 723. SHURTAPE TECHNOLOGIES, INC
Used for use in packaging, bundling, sealing, seaming, holding, waterproofing, plumbing, carpet, color coding, splicing, and other home and general repairs. SHURTAPE TECHNOLOGIES, INC
GP600 Solenoid Valve
Locke Part #: L3094 MFG Part #: 70712
Two-way solenoid valves can be used on either low or, high pressure. The smaller valves are direct acting while the larger valves are pilot operated. Normally closed. Coils are designed for continuous duty. They can remain energized continuously without damage from, overheating or mechanical failure., Pipe Size, 3/4" / 3/4, Orifice, 3/4" / 3/4, CV, 5.00 / 7.40, Minimum PSI, 0 / 1, Max., PSI, Air Inert Gas:, 125 / 150, Water, 125 / 150, Light Oil 300 SSU:, -/150, Maximum Temp., 180, / 225 PARKER-HANNIFIN
Heating Cable 100ft Reel Sold By The Foot
Locke Part #: L8150 MFG Part #: 777445-000
PENTAIR THERMAL MANAGEMENT LLC
Heating Cable 250ft Reel Sold By The Foot
Locke Part #: L8151 MFG Part #: 702549-000
PENTAIR THERMAL MANAGEMENT LLC
Hercules Heavy Duty
Locke Part #: L4436 MFG Part #: 032144-01
Moisture Magnet, Used With Home Refrigerators, Freezers, Small Commercial Units And Air Conditioners. Mms-200 Is Non-Directional, Can Be Used In Either Direction., Charge-O-Valve, Add-O-Valve, Designed For Evacuating & Charging Refrigeration Systems, These Dryers Are Approved For Systems Not Originally Equipped With High Side Valve Bodies. Gauges Attach To High And Low Sides., Little Giant Molecular Sieve, A Small General Purpose Dryer For Field Service Work. Install On Hermetic And Open Type Units. Up To 1/3 Hp With R-12, 1/2 Hp With R 22., Hercules Heavy Duty, For Air Conditioners, Large Freezers, Food Cases Up To 2 Tons. Eliminates Freeze-Up Hazards Caused By Foreign Materials. Dual Screen Action Construction Over 6 Square Inches Filtering Area. High Water Capacity For Heavy Duty Applications. PARKER-HANNIFIN
DiversiTech Corp 0095247101597
Ice Machine Control
Locke Part #: L0364 MFG Part #: A22-1112
ROBERTSHAW CONTROLS COMPANY
Nu-Calgon
Apollo America 814498020026
Apollo America 814498020057
White-Rodgers
Kwik Regulator Set
Locke Part #: L0502 MFG Part #: DHK-69
CAIN Kwiki Regulator Sets - Hammer-On Type., K-69 Consists of:, 1 K708 Bearing, 1 K704 Washer, 1 K706 Wing Nut 12 Sets Poly bagged, 1 K705 Handle 144 Sets Ctn. CAIN MFG. CO INC
Liquid Line Dryer 410A
Locke Part #: L3098 MFG Part #: A-18741
Mueller Industries
Little Giant Molecular Sieve
Locke Part #: L4434 MFG Part #: 032092-01
Moisture Magnet, Used With Home Refrigerators, Freezers, Small Commercial Units And Air Conditioners. Mms-200 Is Non-Directional, Can Be Used In Either Direction., Charge-O-Valve, Add-O-Valve, Designed For Evacuating & Charging Refrigeration Systems, These Dryers Are Approved For Systems Not Originally Equipped With High Side Valve Bodies. Gauges Attach To High And Low Sides., Little Giant Molecular Sieve, A Small General Purpose Dryer For Field Service Work. Install On Hermetic And Open Type Units. Up To 1/3 Hp With R-12, 1/2 Hp With R 22., Hercules Heavy Duty, For Air Conditioners, Large Freezers, Food Cases Up To 2 Tons. Eliminates Freeze-Up Hazards Caused By Foreign Materials. Dual Screen Action Construction Over 6 Square Inches Filtering Area. High Water Capacity For Heavy Duty Applications. PARKER-HANNIFIN
LS 300 BPT-48MM X 55M-24 RLS/CS-H/A
Locke Part #: L0443 MFG Part #: LS300
LS 300 line set tape is designed for use in taping HVAC line sets and other outdoor components., Colors: Black with white print. SHURTAPE TECHNOLOGIES, INC 40074020740
Shurflex Contractor grade metalized cloth duct tape used for air-tight and moisture-free sealing, seaming and joining aluminum backed flex ducts and sealing metal ducts. SHURTAPE TECHNOLOGIES, INC
Moisture Magnet
Locke Part #: L4433 MFG Part #: 032134-01
Moisture Magnet, Used With Home Refrigerators, Freezers, Small Commercial Units And Air Conditioners. Mms-200 Is Non-Directional, Can Be Used In Either Direction., Charge-O-Valve, Add-O-Valve, Designed For Evacuating & Charging Refrigeration Systems, These Dryers Are Approved For Systems Not Originally Equipped With High Side Valve Bodies. Gauges Attach To High And Low Sides., Little Giant Molecular Sieve, A Small General Purpose Dryer For Field Service Work. Install On Hermetic And Open Type Units. Up To 1/3 Hp With R-12, 1/2 Hp With R 22., Hercules Heavy Duty, For Air Conditioners, Large Freezers, Food Cases Up To 2 Tons. Eliminates Freeze-Up Hazards Caused By Foreign Materials. Dual Screen Action Construction Over 6 Square Inches Filtering Area. High Water Capacity For Heavy Duty Applications. PARKER-HANNIFIN
BP PORTER INC
P- 628 BLK-48MM X 55M-24 RLS/CS-H
Locke Part #: L0469 MFG Part #: 162545
To seal Armoflex joints, etc. Waterproof and weatherproof. SHURTAPE TECHNOLOGIES, INC 40074019461
PC 857 SMT-48MM X 55M-24 RLS/CS-H/A
Locke Part #: L0449 MFG Part #: 101015
SHURTAPE TECHNOLOGIES, INC 40074019638
PC 857 SMT-72MM X 55M-16 RLS/CS-H
Locke Part #: L0442 MFG Part #: 101014
SHURTAPE TECHNOLOGIES, INC 40074019577
PCK48HH CHARCOAL BURNOUT CORE
Locke Part #: L3093 MFG Part #: P-37267
Mueller Industries
Nu-Calgon
An alternative plenum rated primary pan probe for the AquaGuard AG-3150E and AG-3175E., It can be substituted for the secondary drain pan probe sensor on AguaGuard AG-3150E and plenum rated AG-3175E Condensate Management Systems that are normally installed in the auxiliary drain port., Included in AquaGuard AG-3575E Complete Condensate Management System., The slim micro probe features an adhesive pad as well as two adjustable mounting clips to attach it to the side of the primary drain pan., Can detect as little as 1/16 inch of condensate water when installed., For quick and easy installation, the plenum rated AG-3176 features a patented waterproof molded shur plug connector. Rectorseal 021449961820
PR24/120V PILOT RE-IGNITER
Locke Part #: L0612 MFG Part #: PR2412036W
Feature:, Prevents Pilot Flames From Extinguishing SEALED UNIT PARTS CO., INC 688392605364
Nu-Calgon
ProFlex Tubing 1/2" ID x 1/2" Wall
Locke Part #: L0981 MFG Part #: PFT01212
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140904
ProFlex Tubing 1-1/8" ID x 1" Wall
Locke Part #: L2472 MFG Part #: PFT11810
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141109
ProFlex Tubing 1-1/8" ID x 1/2" Wall
Locke Part #: L0486 MFG Part #: PFT11812
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140942
ProFlex Tubing 1-1/8" ID x 3/4" Wall
Locke Part #: L2463 MFG Part #: PFT11834
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141031
ProFlex Tubing 1-1/8" ID x 3/8" Wall
Locke Part #: L0483 MFG Part #: PFT11838
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140850
ProFlex Tubing 1-3/8" ID x 1" Wall
Locke Part #: L2473 MFG Part #: PFT13810
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141116
ProFlex Tubing 1-3/8" ID x 1/2" Wall
Locke Part #: L0984 MFG Part #: PFT13812
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140959
ProFlex Tubing 1-3/8" ID x 3/8" Wall
Locke Part #: L0987 MFG Part #: PFT13838
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140867
ProFlex Tubing 1-5/8" ID x 1/2" Wall
Locke Part #: L0985 MFG Part #: PFT15812
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140966
ProFlex Tubing 2-1/8" ID x 1/2" Wall
Locke Part #: L0986 MFG Part #: PFT21812
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140973
ProFlex Tubing 2-1/8" ID x 3/8" Wall
Locke Part #: L0988 MFG Part #: PFT21838
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140881
ProFlex Tubing 3/4" ID x 1" Wall
Locke Part #: L2470 MFG Part #: PFT03410
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141086
ProFlex Tubing 3/4" ID x 1/2" Wall
Locke Part #: L0983 MFG Part #: PFT03412
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140928
ProFlex Tubing 3/4" ID x 3/4" Wall
Locke Part #: L2462 MFG Part #: PFT03434
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141017
ProFlex Tubing 3/4" ID x 3/8" Wall
Locke Part #: L0484 MFG Part #: PFT03438
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140836
ProFlex Tubing 3/8" ID x 1/2" Wall
Locke Part #: L0980 MFG Part #: PFT03812
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140898
ProFlex Tubing 3/8" ID x 3/4" Wall
Locke Part #: L2460 MFG Part #: PFT03834
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140980
ProFlex Tubing 5/8" ID x 1" Wall
Locke Part #: L2469 MFG Part #: PFT05810
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141079
ProFlex Tubing 5/8" ID x 1/2" Wall
Locke Part #: L0982 MFG Part #: PFT05812
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140911
ProFlex Tubing 5/8" ID x 3/4" Wall
Locke Part #: L0477 MFG Part #: PFT05834
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141000
ProFlex Tubing 5/8" ID x 3/8" Wall
Locke Part #: L0481 MFG Part #: PFT05838
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140829
ProFlex Tubing 7/8" ID x 1" Wall
Locke Part #: L2471 MFG Part #: PFT07810
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141093
ProFlex Tubing 7/8" ID x 1/2" Wall
Locke Part #: L0485 MFG Part #: PFT07812
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140935
ProFlex Tubing 7/8" ID x 3/4" Wall
Locke Part #: L0478 MFG Part #: PFT07834
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014141024
ProFlex Tubing 7/8" ID x 3/8" Wall
Locke Part #: L0482 MFG Part #: PFT07838
25/50 rated flexible elastomeric thermal insulation that effectively retards the flow of moisture vapor. Armacell 803014140843
Patented adjustability from 300 to 5000 sq. ft. coverage, UVLampMonitor indicates UV lamp status, High speed electronic power supply, UV lamp safety interlock system, Mounting plate for duct board installation included, Two-year rated lamp life, 10 year warranty, 24 VAC operation, Multi-tap transformer included (PTX-1224F model) ULTRAVATION
Product Image Not Available PZK-90E10-HNBR 5/8 LR EL
Locke Part #: L3950 MFG Part #: 770604
PARKER-HANNIFIN
Product Image Not Available PZK-90E12-HNBR 3/4 LR EL
Locke Part #: L3951 MFG Part #: 770605
PARKER-HANNIFIN
Product Image Not Available PZK-90E14-HNBR 7/8 LR EL
Locke Part #: L3952 MFG Part #: 770606
PARKER-HANNIFIN
Product Image Not Available PZK-90E18-HNBR 1-1/8 LR ELBOW
Locke Part #: L3953 MFG Part #: 770607
PARKER-HANNIFIN
Product Image Not Available PZK-90E4-HNBR 1/4 LR ELB
Locke Part #: L3946 MFG Part #: 770600
PARKER-HANNIFIN
Product Image Not Available PZK-90E6-HNBR 3/8 LR ELB
Locke Part #: L3948 MFG Part #: 770602
PARKER-HANNIFIN
Product Image Not Available PZK-90E8-HNBR 1/2 LR ELB
Locke Part #: L3949 MFG Part #: 770603
PARKER-HANNIFIN
Product Image Not Available PZK-C10-HNBR 5/8" COUPLN
Locke Part #: L3942 MFG Part #: 770504
PARKER-HANNIFIN
Product Image Not Available PZK-C12-HNBR 3/4 COUPLNG
Locke Part #: L3943 MFG Part #: 770505
PARKER-HANNIFIN
Product Image Not Available PZK-C14-HNBR 7/8 COUPLNG
Locke Part #: L3944 MFG Part #: 770506
PARKER-HANNIFIN
Product Image Not Available PZK-C18-HNBR 1-1/8 COUPL
Locke Part #: L3945 MFG Part #: 770507
PARKER-HANNIFIN
Product Image Not Available PZK-C4-HNBR 1/4" COUPLIN
Locke Part #: L3938 MFG Part #: 770500
PARKER-HANNIFIN
Product Image Not Available PZK-C6-HNBR 3/8" COUPLNG
Locke Part #: L3940 MFG Part #: 770502
PARKER-HANNIFIN
Product Image Not Available PZK-C8-HNBR 1/2" COUPLNG
Locke Part #: L3941 MFG Part #: 770503
PARKER-HANNIFIN
White-Rodgers
Apollo America 814498020248
Apollo America 814498020224
Apollo America 814498020330
Odorless and Non-Corrosive, Water and Vapor Proof, For Use on Air Conditioners, Refrigerators and Freezers VAPCO PRODUCTS INC
Will Not Flow Below 350 F, Flexible At - 20 F, Odorless And Non-Corrosive, Water And Vapor Proof, For Use On Air Conditioners, Refrigerators And Freezers VAPCO PRODUCTS INC
Product Image Not Available SF 686 SPT- 2IN X 100FT- 24 RLS/CS-H
Locke Part #: L0448 MFG Part #: 183431
Shurflex indoor/outdoor mastic on a roll used for air-tight and moisture-free sealing of rigid and flexible air duct systems. UL 723 listed. SHURTAPE TECHNOLOGIES, INC 40074020498
Product Image Not Available SF 686 SPT- 3IN X 100FT- 16 RLS/CS-H
Locke Part #: L0413 MFG Part #: 111163
SHURTAPE TECHNOLOGIES, INC 40074020504
SLD13-5SV 5/8 SUCTION LINE DRY
Locke Part #: L0899 MFG Part #: A-17227
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. Mueller Industries
SLD13-6SV 3/4 SUCTION LINE DRY
Locke Part #: L0907 MFG Part #: A-17228
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. Mueller Industries
SLD13-7SV 7/8 SUCTION LINE DRY
Locke Part #: L0908 MFG Part #: A-17229
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. Mueller Industries
SLD13-9SV 1 1/8 SUCTION LINE D
Locke Part #: L1097 MFG Part #: A-17230
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. Mueller Industries
SLD27-7SV 7/8 SUCTION LINE-DRY
Locke Part #: L0881 MFG Part #: A-17302
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. Mueller Industries
SLD27-9SV 1 1/8 SUCTION LINE D
Locke Part #: L0909 MFG Part #: A-17231
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. Mueller Industries
SLD54-11SV 1 3/8 OD SUCTION DR
Locke Part #: L3087 MFG Part #: 450026-001
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. PARKER-HANNIFIN
SLD54-13SV 1 5/8 OD SUCTION DR
Locke Part #: L3088 MFG Part #: 450074-001
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. PARKER-HANNIFIN
SLD8-4SV 1/2 OD SUCTION LINE D
Locke Part #: L3092 MFG Part #: A-17224
The original activated alumina solid core suction line filter dryer., Designed for system cleanup, 500 hour salt spray protection., High capacity acid retention desiccants, Shortest system cutout lengths allow installation in tight areas., Low pressure drop - highest effective filter area, Two access valves simplify pressure drop measurement., Solid copper sweat fittings, UL listed - File No. SA3449. Mueller Industries
Splash Guard Rainshield
Locke Part #: L0739 MFG Part #: 619432-174
External water slinger 6-3/4" diameter. Plastic shield fits 1/2" diameter shaft. Can also be used on opposite shaft end by using plug provided. Regal Beloit
The Model 1000
Locke Part #: L7900 MFG Part #: 1000
NORDIC ELECTRONICS
The Model 5000
Locke Part #: L7902 MFG Part #: 5000
NORDIC ELECTRONICS
The Model 7000
Locke Part #: L7903 MFG Part #: 7000
NORDIC ELECTRONICS
The Model 9000
Locke Part #: L7904 MFG Part #: 9000
Used to add wiring from the indoor to the outdoor unit when converting from an air conditioner to a heat pumps. Single or 2-stage units. Built-in dual fuel controller. 2-wire cable required. NORDIC ELECTRONICS
Thermostat
Locke Part #: L0634 MFG Part #: C12-2001
This control provides accurate temperature adjustment to turn on heat in response to outdoor temperature. ROBERTSHAW CONTROLS COMPANY
Nu-Calgon
Product Image Not Available Truck Pak
Locke Part #: L8153 MFG Part #: 591753-000
Equipped with 50 feet of heating cable, two 9800 FlexFit plug kits, and one roll of 9610 application tape. PENTAIR THERMAL MANAGEMENT LLC
Armacell 803014113809
Armacell 803014113816
Armacell 803014113823
Armacell 803014113854
Armacell 803014113892
Armacell 803014114011
Tubolit Self Seal Tubing 5/8" ID x 1" Wall
Locke Part #: L2486 MFG Part #: DGS05810
Armacell 803014113687
Armacell 803014113694
Armacell 803014113700
Armacell 803014113731
Armacell 803014113748
3 Fan Speeds - Cool, Low Heat & High Heat Speeds (Terminal Connections), Color-Coded (Labeled) Thermostat Connection - For Quick Helpful Selection, System Diagnostics, with Fault Recall (Stored), Cover Label - Displays Diagnostic Table, Red LED Light - Used for Diagnostic Flash Codes, Low Voltage - Fuse Protection - 3A Replaceable Automotive Type, Humidifier & Electronic Air Cleaner Connections (Optional), Kit Includes:, 50M56-843 Ignition Control Module, 21D64-2 Ignitor Kit, Set of Interconnect Harnesses White-Rodgers
Product Image Not Available Vent Safety Switch 330-degree
Locke Part #: L3149 MFG Part #: R1768
EMPIRE COMFORT SYSTEMS, INC
1/2 gallon tank capacity, Vertical centrifugal pump design, Automatic start and stop operation, Some models equipped with float (solid polymer) activated switch for automatic high level water detection (safety overflow switch), For models with safety overflow switch: dual function NO and NC operation (set to NO from factory for equipment shut down connection), Models equipped with safety overflow switch include two 5 switch lead wires, 3/8 O.D. barbed discharge adapter with built-in check valve, Three 1-1/8 diameter inlet openings (two fitted with removable cap plug), Thermally protected, fan cooled motor, Built-in wall mount tabs on tank, Removable pump float locking tab for safety during transportation (remove at time of installation), Maximum water temperature: 140 F, 6 ft, 3-conductor cable with grounded 3-prong plug, Some models include 20 x 3/8 I.D. vinyl discharge tubing, Construction:, Motor- 1/30 hp, Discharge - 3/8" OD barbed, Housing/tank cover - ABS, Volute- ABS, Tank - ABS, Impeller- Glass filled polypropylene, Check valve Acetal LITTLE GIANT