Loading ...

Loading ...

Search in: Bathroom Category

C1807.jpg 0.5 - 1.0 gpf Washout Top Spud Urinal
Locke Part #: C1807 MFG Part #: 6581.001.020 MAYBROOK
3/4" top inlet spud, outlet spud with 1-1/2" tubing tailpiece AMERICAN STANDARD
C1843.jpg 0.5 GPF F/W Urinal
Locke Part #: C1843 MFG Part #: 6042.005.020
3/4-Inch Top Spud Urinal 0.5 Gpf AMERICAN STANDARD
C1842.jpg 0.5-1.0 GPF Urinal
Locke Part #: C1842 MFG Part #: 6550.001.020
3/4" Top Spud White .125gpf - 1.0 Gpf AMERICAN STANDARD
The perfect quiet solution to install a kitchen or sink anywhere you never thought possible., Ideal for heavy-duty residential and commercial applications, Pre-assembled system with low inlets and built-in check valves., Small enough to fit inside a kitchen cabinet with the capability to handle hot water and grease buildup., 1 Discharge, 1-1/2 Vent, Connect to shower, bathtub or sink SFA SANIFLO
Comprises of a pressure switch and circuit board assembly, which starts and stops the unit, and the motor, which drives the pump., Moving parts are kept to an absolute minimum., The unit pumps the effluent upward to 14 feet and/or 140 feet horizontally (with gravity fall)., The waste water from other sanitary fixtures is discharged into the Saniswift via two 1-1/2 inch inlets., A vent connection on the lid., Highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit., A compact unit with attractive rounded contours that fits neatly into tight spaces., Certified to American and Canadian Standards. Electrical standard UL 788, CA: Electrical standard CSA C22.2,, The Saniswift comes with the pump case only. SFA SANIFLO
A newly designed toilet with built-in macerator for green conscious users that want to save water., Standard dual flush version uses 1.28 gallons per flush (4.8 lpf) and 1 gallon per flush (3.8 lpf)., A toilet that s ideal for tight spots where conventional toilets can t fit and for people with physical limitations requiring easy access to a toilet., This toilet was created for situations where there is not enough space., As a toilet that uses a minimum amount of water., As a toilet for use with people that have physical limitations. 4 Litres (1.1 gallon) of water per flush., 1 Discharge, Connect to a sink SFA SANIFLO
C0484.jpg 1"
Locke Part #: C0485 MFG Part #: 3308853
KISSLER & CO
A1098.jpg 1" Diverter for D0289
Locke Part #: A1098 MFG Part #: A0011
LUXURY LINE FAUCETS & PARTS
C0165.jpg 1" Kit
Locke Part #: C0167 MFG Part #: 3308782
Sloan Valve Co
C0494.jpg 1" Royal Stop Chrome Plated
Locke Part #: C0494 MFG Part #: 3308386
Sloan Valve Co
C0491.jpg 1" Royal Stop Nut Cap
Locke Part #: C0491 MFG Part #: 3308840
Sloan Valve Co
C0498.jpg 1" Valve Cap
Locke Part #: C0498 MFG Part #: 3308772
Sloan Valve Co
M1115.jpg 1" x 1429" PTFET Thread Tape
Locke Part #: M1117 MFG Part #: 70887
A new, thicker, professional-grade, Monstrous roll (1429"), Seals threads in more applications, No need for pipe dope., Easier to use - no waste!, All purpose - use on iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. Mill Rose Company
C0165.jpg 1" x 6" Kit
Locke Part #: C0165 MFG Part #: 3308785
Sloan Valve Co
A0443.jpg 1/2" Diverter Spout
Locke Part #: A0443 MFG Part #: A100012CP
1/2 female thread. 5-1/8 from wall. LUXURY LINE FAUCETS & PARTS
S8-12A F_STD.jpg 1/2" FIP X 1/2" FIP 12" FAUCET
Locke Part #: B0212 MFG Part #: S8-12A F
Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008868
S8-16A F_STD.jpg 1/2" FIP X 1/2" FIP 16" FAUCET
Locke Part #: B0213 MFG Part #: S8-16A F
Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008882
S8-20A F_STD.jpg 1/2" FIP X 1/2" FIP 20" FAUCET
Locke Part #: B0214 MFG Part #: S8-20A F
Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008905
A0465.jpg 1/2" Polished chrome spout
Locke Part #: A0465 MFG Part #: 82-0014
KISSLER & CO
A2185.jpg 1/2" x 20
Locke Part #: A2185 MFG Part #: 55-0203
KISSLER & CO
A0332.jpg 1/2" x 24
Locke Part #: A0332 MFG Part #: 755-0253
KISSLER & CO
M760.jpg 1/2" x 260" Teflon Thread Tape
Locke Part #: M0760 MFG Part #: 70190
Mill Rose Company
A2190.jpg 1/2" x 27
Locke Part #: A2190 MFG Part #: AB55-0303
KISSLER & CO
B0340.jpg 1/2" x 3/8" Nut
Locke Part #: B0340 MFG Part #: 300-C
GENE RICH
A0435.jpg 1/2" x 6" Chrome Shower Arm
Locke Part #: A0435 MFG Part #: A020002CP
LUXURY LINE FAUCETS & PARTS
A0435.jpg 1/2" x 8" Chrome Shower Arm
Locke Part #: A0436 MFG Part #: A020004CP
LUXURY LINE FAUCETS & PARTS
B0340.jpg 1/2" x 9/16" Nut
Locke Part #: B0342 MFG Part #: 303-C
GENE RICH
Product Image Not Available 1/2 Flare x 7/8 Ballcock Nut 12 in
Locke Part #: B0322 MFG Part #: BF3-12DL F
Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613966595
BF3-20A F_INL.jpg 1/2 in Flare x 1/2 FIP 20 in
Locke Part #: B0321 MFG Part #: BF3-20A F
Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, No Lead, For use in potable water distribution systems in accessible locations only. BrassCraft Mfg Co 26613966724
Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613966823
These flush valves also have a metal cover to protect from vandalism. Sloan Valve Co
Requires, B0535, 24V transformer to operate. Sloan Valve Co
C0295.jpg 1-1/2", 1.5 Gallon
Locke Part #: C0164 MFG Part #: 3080053
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0295.jpg 1-1/2", 3.5 Gallon
Locke Part #: C0295 MFG Part #: 3080153
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0194.jpg 1-1/2" ADA, 1.5 Gallon
Locke Part #: C0196 MFG Part #: 3010000
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0194.jpg 1-1/2" ADA, 3.5 Gallon
Locke Part #: C0194 MFG Part #: 3010100
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0432.jpg 1-1/2" Vac Breaker Spud Coupling
Locke Part #: C0434 MFG Part #: 0306146
Sloan Valve Co
B0277.jpg 1-1/4" "J" Bend
Locke Part #: B0277 MFG Part #: 130X
Less clean out J B PRODUCTS/ALLEN DIVISION
B0262.jpg 1-1/4" "P" Trap
Locke Part #: B0264 MFG Part #: 100
Chrome plated. J B PRODUCTS/ALLEN DIVISION
B0262.jpg 1-1/4" "P" Trap
Locke Part #: B0270 MFG Part #: 100X
Chrome plated. J B PRODUCTS/ALLEN DIVISION
B0262.jpg 1-1/4" "P" Trap
Locke Part #: B0271 MFG Part #: 101
Chrome plated. J B PRODUCTS/ALLEN DIVISION
C0189.jpg 1-1/4" ADA, 1.5 gpf
Locke Part #: C0189 MFG Part #: 3012426
Flush Connection, Coupling for 1-1/4" Top Spud. With Flanges. Sloan Valve Co
B0357.jpg 1-1/4" Chrome
Locke Part #: B0357 MFG Part #: 448
J B PRODUCTS/ALLEN DIVISION
B0290.jpg 1-1/4" PVC "P" Trap
Locke Part #: B0290 MFG Part #: 813PVCBG
J B PRODUCTS/ALLEN DIVISION
C0295.jpg 1-1/4" Regal Flush Valve, 1.5 Gallon
Locke Part #: C0294 MFG Part #: 3082442
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
B0275.jpg 1-1/4" Repair "P" Trap
Locke Part #: B0275 MFG Part #: 108
J B PRODUCTS/ALLEN DIVISION
B0262.jpg 1-1/4" Semi-Cast
Locke Part #: B0263 MFG Part #: 150CO
Chrome plated. J B PRODUCTS/ALLEN DIVISION
C0432.jpg 1-1/4" Vac Breaker Spud Coupling
Locke Part #: C0433 MFG Part #: 0306140
Sloan Valve Co
B0262.jpg 1-1/4" with Clean Out
Locke Part #: B0262 MFG Part #: 101CO
Chrome plated. J B PRODUCTS/ALLEN DIVISION
B0354.jpg 1-1/4" x 12" Chrome
Locke Part #: B0354 MFG Part #: 813
J B PRODUCTS/ALLEN DIVISION
B0276.jpg 1-1/4" x 20-1/2" "S" Trap
Locke Part #: B0276 MFG Part #: 116X
J B PRODUCTS/ALLEN DIVISION
B0356.jpg 1-1/4" x 45° Chrome
Locke Part #: B0356 MFG Part #: 452
J B PRODUCTS/ALLEN DIVISION
C3604.jpg 1.0 GPF Automatic Flush Valve
Locke Part #: C3604 MFG Part #: 6063.101.002
Self-cleaning piston helps prevent clogging and reduces maintenance, Stadium Flush valve delivers short flush every 2 minutes during periods of high use, Safety Timer helps prevent vandalism by shutting the valve off if sensor is covered for more than 60 seconds, Fully Mechanical Manual Override - allows valve to flush during a power failure, Fail-Safe Operation - valve automatically closes on loss of power or water pressure, Automatically flushes after 24 hours of nonuse to maintain trap seal, ADA, compliant, For use with 3/4" top spud urinals, 11-1/2" Rough-In AMERICAN STANDARD
C3602.jpg 1.28 GPF Auto Flush Valve
Locke Part #: C3602 MFG Part #: 6065121.002
DC Powered (battery included) For use with wall or floor-mounted bowls with 1-1/2" top spud Includes inlet sweat solder kit 11-1/2" Rough-In AMERICAN STANDARD
C1713.jpg 1.28 Gpf Linen Tank
Locke Part #: C1738 MFG Part #: 4188A.104.222
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
Battery, powered closet flush valves have an over ride button to operate valve manually. These flush valves have a metal cover to protect from vandalism. Sloan Valve Co
Requires, B535, 24V transformer to operate. Sloan Valve Co
Exclusive, Self Cleaning Piston-Operated Flush Valves w/ Proximity Operation and Mechanical Manual Override, DC (Battery) Powered (Battery Included), Water, Pressure Range, from 20 to 125 PSI, Recommended Working pressure Range from 25 PSI (Flowing) - 80 PSI (Static), Range Can Be Adjusted Manually, or with Optional Remote Control, All Flush Valves Include Sweat Holder Kit, 11-1/2" Rough-In, Battery, Included, Can be Installed Right or Left Handed, Meets the Americans with Disabilities Act Guidelines and ANSI A117.1 Requirements for Accessible and Usable Building Facilities AMERICAN STANDARD
C1713.jpg 10" R/ 11.28 Tank White
Locke Part #: C1727 MFG Part #: 4188B.104.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg 10" R/i 1.28 Tank RH TR
Locke Part #: C1717 MFG Part #: 4188B.105.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg 10" R/I 1.6 Tank
Locke Part #: C1720 MFG Part #: 4188B.004.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C0672.jpg 12" Braided Stainless Steel Faucet Connector
Locke Part #: C0672 MFG Part #: 0 3996110012 2
3/8" Female Compression Thread x 1/2" I.P. Female Straight Thread Fluidmaster Inc
040711_clip.jpg 12" Braided Stainless Steel Toilet Connector
Locke Part #: C0671 MFG Part #: 0 39961 41186 0
Durable metal nut won t crack when tightening., Metal nut toiler connector provides durable, professional installation., Use with PRO45B brass shank fill valve for maximum durability, Braided stainless steel lengths Fluidmaster Inc
B0279.jpg 12" Plug/One Piece
Locke Part #: B0280 MFG Part #: 1042B
J B PRODUCTS/ALLEN DIVISION
C1713.jpg 12" R/I 1.28 Tank RH TR
Locke Part #: C1716 MFG Part #: 4188A.105.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg 12" R/I Tank 1.28
Locke Part #: C1714 MFG Part #: 4188A.104.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg 12" R/I Tank 1.6
Locke Part #: C1713 MFG Part #: 4188A.004.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
B0347.jpg 12" x 1-1/4" Extension
Locke Part #: B0350 MFG Part #: 442-12
Chrome plated J B PRODUCTS/ALLEN DIVISION
Sloan Valve Co
Sloan Valve Co
Product Image Not Available 15’ Tiling Flange
Locke Part #: A0185 MFG Part #: 15' TILING FLNG
AMERICAN ACRYLIC & INJECTION
Durable metal nut won t crack when tightening., Metal nut toiler connector provides durable, professional installation., Use with PRO45B brass shank fill valve for maximum durability, Braided stainless steel lengths Fluidmaster Inc 0 39961 41187 7
North American oak - honey oak finish, Solid oak frames, Genuine oak veneer sides over plywood, Oak overlay interiors, Surface mount, Single door RSI HOME PRODUCTS SALES INC 8-02062-41914-7
High gloss, snow white finish, Plywood side panels, Laminated interiors, Surface mount, Single door HARDWARE HOUSE 8-02062-41920-8
C1713.jpg 16.5 Height ADA Bowl White
Locke Part #: C1744 MFG Part #: 3517A. 101.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg 16.5 Height Round Front Bowl
Locke Part #: C1740 MFG Part #: 3517B.101.020
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
030_EXTENNTION_PIPE.jpg 18" Extension Pipe Between Toilet and Macerator, White
Locke Part #: C3013 MFG Part #: 030 EXTENNTION PIPE
Designed with the idea to reduce time when installing our macerators, Hide macerating pump behind the wall, Elegant and quiet installation option SFA SANIFLO
C0500.jpg 18" S.S. Grab Bar
Locke Part #: C0500 MFG Part #: RW2015SS
BETTER ENTERPRISE CO LTD
High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 1 door RSI HOME PRODUCTS SALES INC 8-02062-41975-8
North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Self closing hinges, Oak overlay interiors, Cam lock construction - easy assembly, 1 door RSI HOME PRODUCTS SALES INC 8-02062-41960-4
B2806.jpg 19" Bone Rondalyn Countertop Sink 4"
Locke Part #: B2807 MFG Part #: 0491.019.021 RONDALYN 19
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 19-1/8" diameter AMERICAN STANDARD
B5030.jpg 19" Drop-In Round Lav White China
Locke Part #: B5030 MFG Part #: 006-622
COMPASS MANUFACTURING
B2806.jpg 19" Linen Rondalyn Countertop Sink 4"
Locke Part #: B2808 MFG Part #: 0491.019.222 RONDALYN 19
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 19-1/8" diameter AMERICAN STANDARD
19" Round, self-rimming lavatory, Drop-in Lavatory, Complies with ADA requirements for accessibility, Available with single hole, 4" or 8" faucet centers, Faucet and faucet assembly not included, The Mansfield limited lifetime warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Concealed front overflow, Made in USA MANSFIELD PLUMBING PRODUCTS
B2806.jpg 19" White Rondalyn Countertop Sink 4"
Locke Part #: B2806 MFG Part #: 0491.019.020 RONDALYN 19
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 19-1/8" diameter AMERICAN STANDARD
HARDWARE HOUSE 6-04300-04000-3
HARDWARE HOUSE 6-04300-05000-2
HARDWARE HOUSE 6-04300-01002-0
Oval, under counter lavatory, Under counter installation, Complies with ADA requirements for accessibility, Concealed Front Overflow, Mansfield Limited Lifetime Warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards MANSFIELD PLUMBING PRODUCTS
Oval, under counter lavatory, Under counter installation, Complies with ADA requirements for accessibility, Concealed Front Overflow, Mansfield Limited Lifetime Warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards MANSFIELD PLUMBING PRODUCTS
A0482.jpg 2" Caulk type drain
Locke Part #: A0482 MFG Part #: 67040
For Fiberglass shower stall. 4-1/4 stainless steel strainer. 2" connection. IPS Corporation
A0484.jpg 2" Chrome Self Seal Drain
Locke Part #: A0484 MFG Part #: A484
For use on steel, fiberglass & plastic shower bases. Fits 2" schedule 40 pipe. PVC with Stainless Steel grid.a BETTER ENTERPRISE CO LTD
R2985.jpg 2" Drain Gasket
Locke Part #: R2988 MFG Part #: 2WSDG-1
With an extension of over 3-1/2" downward and 4" upward, you will rarely have to disturb the floor or plumbing. It's designed with all of, the classic problems in mind. WILLBURN SPECIALTY PRODUCTS EN
A0459.jpg 2" PVC white shower drain
Locke Part #: A0459 MFG Part #: A459
With above floor tightening gasket. AMERICAN ACRYLIC & INJECTION
With an extension of over 3-1/2" downward and 4" upward, you will rarely have to disturb the floor or plumbing. It's designed with all of, the classic problems in mind. WILLBURN SPECIALTY PRODUCTS EN
A2512.jpg 2 Handle Lever T/S Chrome
Locke Part #: A2512 MFG Part #: 3275.502.002
Diverter tub spout, Exclusive handle alignment system, Great for prolonged contact with water., Durable brass construction, Ceramic disc valving assures drip-free life performance AMERICAN STANDARD
A1255.jpg 2 Piece White 36" Shower
Locke Part #: A1255 MFG Part #: 13632P-WH
2 piece molded sectional shower, BathLock front installation system, Designed to hide seam; Integral soap shelf, Slip resistant, textured bottom; Center drain Aquatic Co
A1258.jpg 2 Piece White 48" Shower
Locke Part #: A1258 MFG Part #: 14832P-WH
2 piece molded sectional shower, BathLock front installation system, 2 comfort molded shower seats, Specifically designed to hide seam; Centerdrain, Slip resistant, textured bottom; Integralsoap shelf Aquatic Co
A0551.jpg 2 Valve Chrome shower only
Locke Part #: A0552 MFG Part #: TQ-F2010507CP
Acrylic handles and water-saver shower head. 1/2" IPS connection. LUXURY LINE FAUCETS & PARTS
C0429.jpg 2-1/16" Tail assembly
Locke Part #: C0429 MFG Part #: 0308801
Sloan Valve Co
Praxis Companies
Praxis Companies
C0672.jpg 20" Braided Stainless Steel Faucet Connector
Locke Part #: C0669 MFG Part #: 0 39961 10020 7
3/8" Female Compression Thread x 1/2" I.P. Female Straight Thread Fluidmaster Inc
Durable metal nut won t crack when tightening., Metal nut toiler connector provides durable, professional installation., Use with PRO45B brass shank fill valve for maximum durability, Braided stainless steel lengths Fluidmaster Inc 0 39961 41188 4
B2800.jpg 20" x 17" Bone Aqualyn Countertop Sink 4"
Locke Part #: B2801 MFG Part #: 0476.028.021 AQUALYN OVA
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
B5030.jpg 20" x 17" Drop-In Oval White China
Locke Part #: B5020 MFG Part #: 006-623
COMPASS MANUFACTURING
B2800.jpg 20" x 17" Linen Aqualyn Countertop Sink 4"
Locke Part #: B2802 MFG Part #: 0476.028.222 AQUALYN OVA
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
Oval, self-rimming lavatory, Drop-In Lavatory, Complies with ADA requirements for accessibility, Concealed front overflow, Available in single hole, 4" or 8" faucet centers, The Mansfield limited lifetime warranty, Faucet and faucet assembly not included, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards MANSFIELD PLUMBING PRODUCTS
B2800.jpg 20" x 17" White Aqualyn Countertop Sink 4"
Locke Part #: B2800 MFG Part #: 0476.028.020 AQUALYN
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
B2800.jpg 20" x 17" White Aqualyn Countertop Sink 8"
Locke Part #: B2803 MFG Part #: 0475.020.020 AQUALYN OVA
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
Concaved front for wheelchair accessibility, Complies with ADA requirements for accessibility, Available in 4" or 8" faucet centers, also available in less overflow version L/O, Concealed front overflow, Complete with template and instructions, faucet and faucet assembly not included, Compatible Carriers Zurn Z-1251-79, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, The Mansfield limited lifetime warranty, Designed for concealed arm carriers, Made in USA MANSFIELD PLUMBING PRODUCTS
Concaved front for wheelchair accessibility, Complies with ADA requirements for accessibility, Available in 4" or 8" faucet centers, also available in less overflow version L/O, Concealed front overflow, Complete with template and instructions, faucet and faucet assembly not included, Compatible Carriers Zurn Z-1251-79, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, The Mansfield limited lifetime warranty, Designed for concealed arm carriers, Made in USA MANSFIELD PLUMBING PRODUCTS
North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Self closing hinges, Oak overlay interiors, Cam lock construction - easy assembly, 2 door/ 1 shelf HARDWARE HOUSE 8-02062-41933-8
Full 4" high backsplash, Concealed front overflow, Drilled for concealed arm carrier, Includes hanger, Designed for concealed arm installation, Available in single hole, 4" or 8" faucet centers, Complies with ADA requirements for accessibility, Compatible Carriers Zurn Z1231, Z1251 & Z1253 Series, The Mansfield limited lifetime warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Made in USA MANSFIELD PLUMBING PRODUCTS
C0500.jpg 24" S.S. Grab Bar
Locke Part #: C0501 MFG Part #: RW2016SS
BETTER ENTERPRISE CO LTD
High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 2 door RSI HOME PRODUCTS SALES INC 8-02062-41976-5
North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Self closing hinges, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Oak overlay interiors, Cam lock construction - easy assembly, 2 door RSI HOME PRODUCTS SALES INC 8-02062-41961-1
High gloss, snow white finish, Plywood side panels, Laminated interiors, Surface mount, Double door HARDWARE HOUSE 8-02062-41921-5
North American oak - honey oak finish, Solid oak frames, Genuine oak veneer sides over plywood, Oak overlay interiors, Surface mount, Double door HARDWARE HOUSE 8-02062-41915-4
25" x 19" pedestal lavatory, 34-1/4" luxury height, Features a luxurious, deep basin for extra water volume, Available in single, 4" or 8" faucet centers, Order 292 sink, 293 pedestal, Concealed front overflow, Complete with hanger and instructions, Faucet and faucet assembly not included, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Mansfield limited lifetime warranty MANSFIELD PLUMBING PRODUCTS
25" x 19" pedestal lavatory, 34-1/4" luxury height, Features a luxurious, deep basin for extra water volume, Available in single, 4" or 8" faucet centers, Order 292 sink, 293 pedestal, Concealed front overflow, Complete with hanger and instructions, Faucet and faucet assembly not included, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Mansfield limited lifetime warranty MANSFIELD PLUMBING PRODUCTS
GENE RICH
R2985.jpg 3" Shower Drain Extension Silver Pearl
Locke Part #: R2987 MFG Part #: 3SDE-1
With an extension of over 3-1/2" downward and 4" upward, you will rarely have to disturb the floor or plumbing. It's designed with all of, the classic problems in mind. WILLBURN SPECIALTY PRODUCTS EN
C0484.jpg 3/4"
Locke Part #: C0484 MFG Part #: 3308856
KISSLER & CO
C0194.jpg 3/4" ADA, 1 Gallon
Locke Part #: C0199 MFG Part #: 3012636
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0194.jpg 3/4" ADA, 1.5 Gallon
Locke Part #: C0193 MFG Part #: 3012600
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0165.jpg 3/4" Kit
Locke Part #: C0168 MFG Part #: 3308788 H636-AA
Sloan Valve Co
C0295.jpg 3/4" Regal Flush Valve, 1.5 Gallon
Locke Part #: C0293 MFG Part #: 3082653
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0494.jpg 3/4" Royal Stop Chrome Plated
Locke Part #: C0495 MFG Part #: 0388025
Sloan Valve Co
C0520.jpg 3/4" Urinal Retro-Fit Kit
Locke Part #: C0522 MFG Part #: 3325402
These flush valves also have a metal cover to protect from vandalism. Sloan Valve Co
C0432.jpg 3/4" Vac Breaker Spud Coupling
Locke Part #: C0432 MFG Part #: 0306125
Sloan Valve Co
M1115.jpg 3/4" x 1429" PTFET Thread Tape
Locke Part #: M1116 MFG Part #: 70886
A new, thicker, professional-grade, Monstrous roll (1429"), Seals threads in more applications, No need for pipe dope., Easier to use - no waste!, All purpose - use on iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. Mill Rose Company
M760.jpg 3/4" x 520" Teflon Thread Tape
Locke Part #: M0743 MFG Part #: 70196
Mill Rose Company
S1-12DLM F_INL.jpg 3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0282 MFG Part #: S1-12DLM F
BrassCraft Mfg Co 26613157023
S1-16DLM F_STD.jpg 3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0283 MFG Part #: S1-16DLM F
BrassCraft Mfg Co 26613160276
S1-12DL F_STD.jpg 3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0298 MFG Part #: S1-12DL F
Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613009049
S1-20DL F_STD.jpg 3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0302 MFG Part #: S1-20DL F
Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613009063
S1-12A F_STD.jpg 3/8" COMP X FIP, 12" FAUCET
Locke Part #: B0294 MFG Part #: S1-12A F
Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008806
S1-16A F_INL.jpg 3/8" COMP X FIP, 16" FAUCET
Locke Part #: B0295 MFG Part #: S1-16A F
Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008820
S1-20A F_STD.jpg 3/8" COMP X FIP, 20" FAUCET
Locke Part #: B0296 MFG Part #: S1-20A F
Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008844
S1-30A F_STD.jpg 3/8 CMP X 1/2 FIP X 30" FAUCET
Locke Part #: B0299 MFG Part #: S1-30A F
Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613158730
Product Image Not Available 3/8 Flare x 7/8 Ballcock Nut 12 in
Locke Part #: B0318 MFG Part #: BF1-12DL F
Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613966427
Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613966687
S1-20KC F_STD.jpg 3/8CMPX3/8CMP 20" FCET KC NOSE
Locke Part #: B0305 MFG Part #: S1-20KC F
Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613158914
S1-12KC F_STD.jpg 3/8CMPX3/8CMPX12" FCET KC NOSE
Locke Part #: B0297 MFG Part #: S1-12KC F
Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613158907
A1270.jpg 3 Piece White 36" Acrylic Shower
Locke Part #: A1270 MFG Part #: 36ACTRIO-WH
MUST ORDER BOTH DOOR & JAM, 3 Piece Acrylic molded sectional, BathLock front installation system, Beautiful simulated ceramic tile; Center drain, Designed to hide seams; Integral toiletry shelves Aquatic Co
A1255.jpg 3 Piece White 36" Shower
Locke Part #: A1256 MFG Part #: 1363TRIO-WH
2 piece molded sectional shower, BathLock front installation system, Designed to hide seam; Integral soap shelf, Slip resistant, textured bottom; Center drain Aquatic Co
A1259.jpg 3 Piece White 48" Shower
Locke Part #: A1259 MFG Part #: 1483NTRI-WH
BathLock front installation system, Specifically designed to hide seam, 3 piece molded sectional shower; center drain, Slip resistant, textured bottom; integral soap shelf Aquatic Co
A1261.jpg 3 Piece White 60" Sectional Shower
Locke Part #: A1261 MFG Part #: 16033P-WH
Smooth wall 3 piece molded sectional, BathLock front installation system, Integral soap shelf; Center drain, Designed to hide seams; Comfort corner seats Aquatic Co
A0551.jpg 3 Valve Chrome tub/shower
Locke Part #: A0551 MFG Part #: F3010505CP
Acrylic handles and water-saver shower head. 1/2" IPS connection. LUXURY LINE FAUCETS & PARTS
C0429.jpg 3-1/16" Tail assembly
Locke Part #: C0534 MFG Part #: 0308803
Sloan Valve Co
Praxis Companies
Battery, powered closet flush valves have an over ride button to operate valve manually. These flush valves have a metal cover to protect from vandalism. Sloan Valve Co
Requires, B535, 24V transformer to operate. Sloan Valve Co
High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 1 door/ 2 drawer HARDWARE HOUSE 8-02062-41979-6
North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Self closing hinges, Oak overlay interiors, Cam lock construction - easy assembly, 1 door/ 2 drawer HARDWARE HOUSE 8-02062-41964-2
High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 2 door HARDWARE HOUSE 8-02062-41978-9
North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Self closing hinges, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Oak overlay interiors, Cam lock construction - easy assembly, 2 door RSI HOME PRODUCTS SALES INC 8-02062-41963-5
High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 1 door/ 2 drawer HARDWARE HOUSE 8-02062-41986-4
HARDWARE HOUSE 8-02062-41922-2
A0037.jpg 30" x 60" x 16" Bathtub Left hand drain White
Locke Part #: A0040 MFG Part #: BT-1 T6030L WHITE
Veritek is SwanStone's affordable, compression-molded material with no, surface coating to chip or crack. This, non-porous material will not mold or, mildew, so it is perfect for your shower, floor., Natural Gloss surface for easy cleaaning., 16 height is deeper than a standard tub. E L MUSTEE & SONS
A0037.jpg 30" x 60" x 16" Bathtub Right hand drain White
Locke Part #: A0037 MFG Part #: BT-1 T6030R WHITE
Veritek is SwanStone's affordable, compression-molded material with no, surface coating to chip or crack. This, non-porous material will not mold or, mildew, so it is perfect for your shower, floor., Natural Gloss surface for easy cleaaning., 16 height is deeper than a standard tub. E L MUSTEE & SONS
OVAL.jpg 32" x 60" x 19" Oval less apron
Locke Part #: A0190 MFG Part #: BR19
3/4 H.P. pump motor, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
A0881.jpg 32" x 60" x 72" Shower Walls Tahiti Desert
Locke Part #: A0889 MFG Part #: SK326072 050
Authentic solid surface., A complete kit with everything you need to design your shower: side & back wall panels, corner molding strips, corner soap dishes, adhesive, caulk, and pressure sensitive tape, Wall panels are designed to fit most shower applications with no trimming required, Kit Includes:, Two Side panels, one back panel, two corner molding strips, two corner soap dishes, installation materials and complete installation instructions. SWANSTONE
Rectangular drop-in whirlpool. Replaces standard bathtubs, Variable speed blower produce powerful air streams for a better massage, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, A powerful heating element warms the air before it enters the bathing well., Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Rectangular drop-in whirlpool. Replaces standard bathtubs, Variable speed blower produce powerful air streams for a better massage, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, A powerful heating element warms the air before it enters the bathing well., Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Sloan Valve Co
Sloan Valve Co
A0881.jpg 34" x 48" x 72" Shower Walls White
Locke Part #: A0884 MFG Part #: SK344872 010
Authentic solid surface., A complete kit with everything you need to design your shower: side & back wall panels, corner molding strips, corner soap dishes, adhesive, caulk, and pressure sensitive tape, Wall panels are designed to fit most shower applications with no trimming required, Kit Includes:, Two Side panels, one back panel, two corner molding strips, two corner soap dishes, installation materials and complete installation instructions. SWANSTONE
Aquatic Co
C0500.jpg 36" S.S. Grab Bar
Locke Part #: C0502 MFG Part #: RW2017SS
BETTER ENTERPRISE CO LTD
HARDWARE HOUSE 8-02062-41917-8
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Praxis Companies
Praxis Companies
A1271.jpg 36" x 36" x 84" White Shower Module
Locke Part #: A1271 MFG Part #: 36AC-WH
Shower Module, Lustrous, durable acrylic, Integral dome, Clear acrylic grab bar, Molded toiletry shelves, Center drain location, Must install the pivot door with expander jam Aquatic Co
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
OVAL1.jpg 36" x 60" x 19" Oval less apron
Locke Part #: A0125 MFG Part #: BR-24 BISCUIT
3/4 H.P. pump motor, 6 Jets (4 Regular & 2 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL1.jpg 36" x 60" x 19" Oval less apron
Locke Part #: A0192 MFG Part #: BR24
3/4 H.P. pump motor, 6 Jets (4 Regular & 2 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL TUB2.jpg 36" x 72" Oval Tub
Locke Part #: A0183 MFG Part #: BR-43 WHITE
68 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
Rectangular Deck with Oval Bowl 36"x72", End Drain, 68 Gallons, Pre-leveled foam base AMERICAN ACRYLIC & INJECTION
Rectangular whirlpool with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Rectangular whirlpool with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
A1110.jpg 38" Shower with LH grab bar RH Phenolic slat seat White
Locke Part #: A1112 MFG Part #: 1363BFS W/RH SEAT & Bars
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Aquatic Co
A1110.jpg 38" Shower with LH grab bar White
Locke Part #: A1111 MFG Part #: HS738W/LH BARS
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Praxis Companies
A1110.jpg 38" Shower with RH grab bar LH Phenolic slat seat White
Locke Part #: A1113 MFG Part #: 1363BFS W/LH SEAT & Bars
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Aquatic Co
A1110.jpg 38" Shower with RH grab bar White
Locke Part #: A1110 MFG Part #: HS738W/RH BARS
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Praxis Companies
A1117.jpg 3pc 60" x 32" Shower RH Drain ADA White
Locke Part #: A1118 MFG Part #: HS766B RH WHITE
Easy care gelcoat/fiberglass construction, Textured slip-resistant bottom, Five year warranty on, manufacturing defects,, Approved and accepted by IAPMO, UPC,FHA/HUD Praxis Companies
A1117.jpg 3pc. 60" x 32" Shower LH Drain ADA White
Locke Part #: A1117 MFG Part #: HS761B LH WHITE
Easy care gelcoat/fiberglass construction, Textured slip-resistant bottom, Five year warranty on, manufacturing defects,, Approved and accepted by IAPMO, UPC,FHA/HUD Praxis Companies
Professional quality washer-less, chrome plated, color coded handles, all brass and copper waterways, NSF approved. LUXURY LINE FAUCETS & PARTS
3-3/4" From Inlet Of Faucet To Outlet, 4" (102mm) Centers, Aerator (B-0199-03), 1-7/16" Clearance Deck To Aerator T&S BRASS & BRONZE WORKS, INC
Literature_HeaderImage-1-2000x550_c.jpg 4" DEEP BRASS CLOSET FLANGE
Locke Part #: C0215 MFG Part #: 152-001
Shallow or Deep B&K LLC
B0362.jpg 4" Faucet, Chrome
Locke Part #: B0362 MFG Part #: F4034201CP
Water saving aerator, brass pop-up, & S.S. ball assembly. Easy install. LUXURY LINE FAUCETS & PARTS
B0501.jpg 4" Faucet, Chrome (shown)
Locke Part #: B0501 MFG Part #: F5038203CP
LUXURY LINE FAUCETS & PARTS
B0362.jpg 4" Faucet, Oil Rubbed Bronze
Locke Part #: B0371 MFG Part #: F4034201RL-TBA1
Water saving aerator, brass pop-up, & S.S. ball assembly. Easy install. LUXURY LINE FAUCETS & PARTS
B0362.jpg 4" Faucet, Satin Nickel
Locke Part #: B0370 MFG Part #: F4034201NP
Water saving aerator, brass pop-up, & S.S. ball assembly. Easy install. LUXURY LINE FAUCETS & PARTS
B0501.jpg 4" Faucet, Satin Nickel
Locke Part #: B0502 MFG Part #: F5038203NP
LUXURY LINE FAUCETS & PARTS
B1234.jpg 4" Lavatory Faucet Less Pop-Up
Locke Part #: B1233 MFG Part #: F4024001CP
Professional quality, washer-less cartridge design, chrome plated, color coded index on handles, all brass and copper waterways. NSF approved. LUXURY LINE FAUCETS & PARTS
B1234.jpg 4" Lavatory Faucet With Pop-Up
Locke Part #: B1234 MFG Part #: F4024201CP
Professional quality, washer-less cartridge design, chrome plated, color coded index on handles, all brass and copper waterways. NSF approved. LUXURY LINE FAUCETS & PARTS
Literature_HeaderImage-1-2000x550_c.jpg 4" SHALLOW BRASS CLOSET FLANGE
Locke Part #: C0214 MFG Part #: 152-000
Shallow or Deep B&K LLC
M1899.jpg 4" x 16" x 16" Tub box
Locke Part #: M1899 MFG Part #: 4X16X16 26 BOX
Easy installation of tub drains. HENDREN PLASTICS
R0933.jpg 4" x 3" Flange
Locke Part #: R0933 MFG Part #: 4851-2A 4X3"
With adjustable metal ring. Mueller Industries
R0980.jpg 4" x 3" Offset Flange
Locke Part #: R0980 MFG Part #: 4848-A 4 X 3"
Mueller Industries
R0933.jpg 4" x 4" Flange
Locke Part #: R0934 MFG Part #: 4851-2A 4X4"
With adjustable metal ring. Mueller Industries
M1899.jpg 4" x 8" x 12" Tub box
Locke Part #: M1900 MFG Part #: 4X8X12 56 PR BX
Easy installation of tub drains. HENDREN PLASTICS
C0429.jpg 4-1/16" Tail assembly
Locke Part #: C0439 MFG Part #: 0308805
Sloan Valve Co
A0484.jpg 4-1/4" Pol. Brass Grid Only
Locke Part #: A0489 MFG Part #: 69163
For use on steel, fiberglass & plastic shower bases. Fits 2" schedule 40 pipe. PVC with Stainless Steel grid.a IPS Corporation
AMERICAN STANDARD
A2450.jpg 4-3/16" Cold Stem with Seat
Locke Part #: A2450 MFG Part #: 23-3162C
KISSLER & CO
A2452.jpg 4-3/16" Diverter Stem with Seat
Locke Part #: A2452 MFG Part #: 23-3314
KISSLER & CO
A2450.jpg 4-3/16" Hot Stem with Seat
Locke Part #: A2451 MFG Part #: 23-3162H
KISSLER & CO
C0281.jpg 4-3/8" x 2-7/8"
Locke Part #: C0288 MFG Part #: G-18 14095
KIRKHILL MFG CO
A0176.jpg 41" x 69" Oval Bowl Drop-In, 82 Gallons, Biscuit Color
Locke Part #: A0177 MFG Part #: BR-40 BISCUIT W/P
Oval Bowl Drop-In (no deck) 41" x 69", End Drain, 82 Gallons, Pre-leveled foam base AMERICAN ACRYLIC & INJECTION
Oval Bowl Drop-In (no deck) 41" x 69", End Drain, 82 Gallons, Pre-leveled foam base AMERICAN ACRYLIC & INJECTION
C0500.jpg 42" S.S. Grab Bar
Locke Part #: C0503 MFG Part #: RW2019SS
BETTER ENTERPRISE CO LTD
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
RECTANGULAR.jpg 42" x 60" x 20" Rectangular less apron
Locke Part #: A0121 MFG Part #: BR-37 BISCUIT
1 H.P. pump motor, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
1 H.P. pump motor, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
ARMREST TUB.jpg 42" x 72" Double
Locke Part #: A0184 MFG Part #: BRA-45 WHITE
82 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL TUB 1.jpg 42" x 72" Oval Tub
Locke Part #: A0122 MFG Part #: BR-32 BISCUIT
79 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL TUB 1.jpg 42" x 72" Oval Tub
Locke Part #: A0182 MFG Part #: BR-32 WHITE
79 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 47 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 47 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 54 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Construction- Self-contained, pre-plumbed whirlpool bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 54 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Construction- Self-contained, pre-plumbed whirlpool bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Aquatic Co
Aquatic Co
C0500.jpg 48" S.S. Grab Bar
Locke Part #: C0504 MFG Part #: RW2018SS
BETTER ENTERPRISE CO LTD
A1125.jpg 48" Shower with LH seat & bars
Locke Part #: A1126 MFG Part #: HS771W/LH SEAT
Molded in seat, Slip-resistant floor, One-piece seamless construction, 1-1/2" diameter safety grab bars, Colors available by special order White Praxis Companies
A1125.jpg 48" Shower with RH seat & bars
Locke Part #: A1125 MFG Part #: HS776W/RH SEAT
Molded in seat, Slip-resistant floor, One-piece seamless construction, 1-1/2" diameter safety grab bars, Colors available by special order White Praxis Companies
HARDWARE HOUSE 8-02062-41924-6
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
A1274.jpg 48" x 36" x 84" LH Seat, White Shower
Locke Part #: A1275 MFG Part #: 48ACSL-WH
Shower Module, Lustrous, durable acrylic, Integral dome, Molded seat, RH or LH, Clear acrylic grab bar, Center drain location Aquatic Co
A1274.jpg 48" x 36" x 84" RH Seat, White Shower
Locke Part #: A1274 MFG Part #: 48ACSR-WH
Shower Module, Lustrous, durable acrylic, Integral dome, Molded seat, RH or LH, Clear acrylic grab bar, Center drain location Aquatic Co
B0279.jpg 5" Plug/One Piece
Locke Part #: B0279 MFG Part #: 1042E
J B PRODUCTS/ALLEN DIVISION
B0279.jpg 5" Plug/Two Piece
Locke Part #: B0285 MFG Part #: 1042G
J B PRODUCTS/ALLEN DIVISION
A2461.jpg 5" Right Hand Stem
Locke Part #: A2461 MFG Part #: 23-0316
KISSLER & CO
A0428.jpg 5’ Shower Rod (60" x 1")
Locke Part #: A0428 MFG Part #: 1274EO
Chrome plated rod only, less flanges. J B PRODUCTS/ALLEN DIVISION
Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Exclusive safety suction return fitting, Hydro-Massage System: 4 premium power-flow adjustable Jets and 1 lumbar ease-flow adjustable jets, Grip Sure textured bottom, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Exclusive safety suction return fitting, Hydro-Massage System: 4 premium power-flow adjustable Jets and 1 lumbar ease-flow adjustable jets, Grip Sure textured bottom, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
AMERICAN STANDARD
C0281.jpg 5-3/8" x 3-1/2
Locke Part #: C0282 MFG Part #: G-16 14090
KIRKHILL MFG CO
C0281.jpg 5-3/8" x 3-1/8"
Locke Part #: C0281 MFG Part #: G-8 21384
KIRKHILL MFG CO
Premium acrylic with fibreglass reinforcement, Outward opening door, Water tight door system, Quick Drain water removal system, Built-in chair height seat for easy wheelchair transfer, Textured tub floor, Free standing metal support frame, 26 air jets full surrounding the bathing well, Automatic purge with timer, Ozone sanitation, Grab bar, 12 hydro massage jets including 6 lumbar jets, Optional Components:, ADA compliant Slide Bar with Hand shower Holder, Chromatherapy Light System, In-Line Heater, Neck Rest, Acrylic Tub Extender, Tile Flange, For use with:, Walk-In Bath Universal Wall Surround, Ciencia solid surface wall set, Compliance Certifications - Meets or Exceeds the Following Specifications:, ANSI Z124.3, IAPMO - USPC, ANSI Z124.1.2 for Plastic Bathtubs, ASME A112.19.7 for Whirlpool Appliances ASME, A112.19.15 for Walk-In Bathtubs, CSA B-45.5 for Canadian Plumbing Fixtures AMERICAN STANDARD
A0100.jpg 54" x 30" x 15-11/16" LH White
Locke Part #: A0101 MFG Part #: 011-2303-00
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg 54" x 30" x 15-11/16" RH White
Locke Part #: A0100 MFG Part #: 011-2302-00
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
Rectangular whirlpool with integral armrests, Simple, reliable air-switch turns the unit on and off, Self-contained, pre-plumbed whirlpool bath mounted on a pre-leveled base, Optional removable apron provides easy access to the motor and plumbing, Six strategically positioned jets deliver a therapeutic massage: Four body jets and two foot jets, Two air controls adjust the volume of air through the jets - creating mild to vigorous whirlpool action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Durable single-speed pump, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Optional inline heater, trim upgrade, lift and turn drain kit, factory installed nail flange, field installed nail flange kit, Made in USA MANSFIELD PLUMBING PRODUCTS
Rectangular whirlpool with integral armrests, Simple, reliable air-switch turns the unit on and off, Self-contained, pre-plumbed whirlpool bath mounted on a pre-leveled base, Optional removable apron provides easy access to the motor and plumbing, Six strategically positioned jets deliver a therapeutic massage: Four body jets and two foot jets, Two air controls adjust the volume of air through the jets - creating mild to vigorous whirlpool action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Durable single-speed pump, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Optional inline heater, trim upgrade, lift and turn drain kit, factory installed nail flange, field installed nail flange kit, Made in USA MANSFIELD PLUMBING PRODUCTS
Slip-resistant floor, soap dishes and towel rack. Ideal for use by the handicapped and the elderly. Less trim. Above floor rough-in. Praxis Companies
B0347.jpg 6" x 1-1/4" Extension
Locke Part #: B0347 MFG Part #: 442-6
Chrome plated J B PRODUCTS/ALLEN DIVISION
B0508.jpg 6"-12" lavatory faucet Oil Rubbed Bronze
Locke Part #: B0508 MFG Part #: FMOA410RW
LUXURY LINE FAUCETS & PARTS
A0428.jpg 6’ Shower Rod (72" x 1")
Locke Part #: A0429 MFG Part #: 974-662303L04
Chrome plated rod only, less flanges. Sioux Chief Mfg
Tub bottoms are reinforced for no-flex strength, Mounted on pre-levelled feet for easy no-mudset installation, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Hydro-Massage System: 4 premium power-flow adjustable Jets and 2 lumbar ease-flow adjustable jets, Grip Sure textured bottom, Exclusive safety suction return fitting, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
AMERICAN STANDARD
B0503.jpg 6-12" Lavatory Faucet Chrome
Locke Part #: B0503 MFG Part #: FW028200CP
LUXURY LINE FAUCETS & PARTS
B0265.jpg 6-12" Lavatory Faucet Satin Nickel
Locke Part #: B0265 MFG Part #: FW025200NP
Washer-less cartridge design all brass & copper waterways. NSF approved. LUXURY LINE FAUCETS & PARTS
B0503.jpg 6-12" Lavatory Faucet Satin Nickel
Locke Part #: B0504 MFG Part #: FW028200NP
LUXURY LINE FAUCETS & PARTS
C0283.jpg 6-3/4" x 3-1/2"
Locke Part #: C0283 MFG Part #: G-16W 14092
KIRKHILL MFG CO
Aquatic Co
Aquatic Co
Aquatic Co
A1100.jpg 60" LH T & S with Grab Bars White
Locke Part #: A1101 MFG Part #: HTS731 W/BARS L
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A1100.jpg 60" LH T & S with RH phenolic seat, White
Locke Part #: A1106 MFG Part #: HTS731W/RH SEAT
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A0960.jpg 60" Natural Garden Tub
Locke Part #: A0961 MFG Part #: 1160410-BO
This Garden Tub model features an exterior step with wainscot. Large deck area for mounting faucets. Sump Depth: 13" Aquatic Co
A1100.jpg 60" RH T & S with Grab Bars White
Locke Part #: A1100 MFG Part #: HTS736 W/BARS R
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A1100.jpg 60" RH T & S with LH phenolic seat White
Locke Part #: A1105 MFG Part #: HTS736W/LH SEAT
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A1120.jpg 60" Shower with fold-down seat on right White
Locke Part #: A1121 MFG Part #: HS760W/RH SEAT
5' Shower with or without seat., Can be recessed for wheelchair roll-in, Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for handicapped people., 1-1/2" diameter stainless steel grab bar., Slip-resistant floor., Drain is located in rear center of unit., Note: seat must be mounted before unit is set in place. It can not be added later. Praxis Companies
A1120.jpg 60" Shower with wraparound grab-bar White
Locke Part #: A1120 MFG Part #: HS760 60" W/ WRAP BAR
5' Shower with or without seat., Can be recessed for wheelchair roll-in, Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for handicapped people., 1-1/2" diameter stainless steel grab bar., Slip-resistant floor., Drain is located in rear center of unit., Note: seat must be mounted before unit is set in place. It can not be added later. Praxis Companies
COMPETITIVE ACRYLIC WHIRLPOOL.jpg 60" White Acrylic Skirt for A0196 (Optional )
Locke Part #: A0197 MFG Part #: SKIRT NO/ACCESS
6 Jets 3/4 H.P. Standard Pump. Acrylic. On/Off Switch, Air control, Skirt sold separately. Sump Depth: 19" AMERICAN ACRYLIC & INJECTION
A0220.jpg 60" White Drop-In Tub
Locke Part #: A0220 MFG Part #: 3760620-WH
Contoured comfort... featuring a sculptured look in a deep model with a contoured back and integral armrests., Sump Depth: 19 -1/2 Aquatic Co
A0966.jpg 60" White Drop-In Tub
Locke Part #: A0966 MFG Part #: 6524 WHITE
Sump Depth: 17". This contemporary and slick design fits well into a 5' space. Designed for pleasure. Drop-In MANSFIELD PLUMBING PRODUCTS
A0960.jpg 60" White Garden Tub
Locke Part #: A0960 MFG Part #: TO-201-01
This Garden Tub model features an exterior step with wainscot. Large deck area for mounting faucets. Sump Depth: 13" Praxis Companies
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
A0100.jpg 60" x 30" x 14-1/4" LH Biscuit
Locke Part #: A0115 MFG Part #: 011-2365-96
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg 60" x 30" x 14-1/4" LH Natural
Locke Part #: A0319 MFG Part #: 011-2365D06
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg 60" x 30" x 14-1/4" LH White
Locke Part #: A0103 MFG Part #: 011-2365D00
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg 60" x 30" x 14-1/4" RH Biscuit
Locke Part #: A0114 MFG Part #: 011-2364-96
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg 60" x 30" x 14-1/4" RH Natural
Locke Part #: A0318 MFG Part #: 011-2364D06
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg 60" x 30" x 14-1/4" RH White
Locke Part #: A0102 MFG Part #: 011-2364D00
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
One piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., Model shall conform to ANSI-Z124.1.2-2005 FLORESTONE PRODUCTS
One piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., Model shall conform to ANSI-Z124.1.2-2005 FLORESTONE PRODUCTS
6 Jets 3/4 H.P. Standard Pump. Acrylic. On/Off Switch, Air control, Skirt sold separately. Sump Depth: 19" AMERICAN ACRYLIC & INJECTION
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
A1288.jpg 60" x 60" x 22" White corner whirlpool tub
Locke Part #: A1288 MFG Part #: 2600CCWP-WH
Standard Features:, 3/4 HP motor, 4 Adjust-a-flow jets, Beautiful white LASCOAT gelcoat finish, Integral 2-T Tiling Flange: Turned up edge on 2 sides, Center front drain location only., Advanced safety suction system, Corrugated Cap & Shrink Wrap, 1 Pneumatic on/off control, Electrical appliance plug, 1 Air control, Deep Bathing Well, Integral seat & armrests Aquatic Co
A1287.jpg 60" x 60" x 23" White corner whirlpool tub
Locke Part #: A1287 MFG Part #: 3860621-WH W/2T FLANGE
Standard Features:, 3/4 HP motor, 6 Adjust-a-flow jets, 2" rolled down edge on 3 front sides, Integral 2-T Tiling Flange: Turned up edge on 2 sides, Center front drain location only., Advanced safety suction system, Comfort-sloped backrest, Pneumatic on/off control, 2 Lumbar Jets, 2 Air controls, Pre-leveled base, Electrical appliance plug, Integral seat & armrests Aquatic Co
Spacious, two-person corner model with integral armrests, Drop-in oval with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 58 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Material- Acrylic, fiberglass reinforced, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
Spacious, two-person corner model with integral armrests, Drop-in oval with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 58 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Material- Acrylic, fiberglass reinforced, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Hydro-massage system: 4 premium power-flow adjustable jets, 1 lumbar ease-flow adjustable jets and 2 foot ease-flow adjustable jet, Grip Sure textured bottom, Exclusive safety suction return fitting, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Hydro-massage system: 4 premium power-flow adjustable jets, 1 lumbar ease-flow adjustable jets and 2 foot ease-flow adjustable jet, Grip Sure textured bottom, Exclusive safety suction return fitting, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire AMERICAN STANDARD
AMERICAN STANDARD
A0968.jpg 72" White Drop-In Tub
Locke Part #: A0968 MFG Part #: 6533 WHITE SOAKER
Sump Depth: 23". Detailed sculptured beauty, built-in assistance bars, and soap dishes. Slip resistant bottoms. End drain, drop-in tub with. This oval tub can also be whirlpool adapted. Easy cleaning and durability. MANSFIELD PLUMBING PRODUCTS
A0971.jpg 72" White Drop-In Tub
Locke Part #: A0971 MFG Part #: 1572420-WH
Sump Depth: 19-1/2 . Contoured comfort featuring a sculptured look in a deep model with a contoured back. Outstanding features are its armrests. Drop-In Aquatic Co
3/4 HP motor, 6 Adjust-a-flow jets, Standard island unit - 2" rolled down edge on 4 sides, Universal drain location (right or left hand):, Pneumatic on/off control, Comfort-sloped backrest, Electrical appliance plug, Pre-leveled base, 2 Air controls, Advanced safety suction system, Acrylic grab bars Aquatic Co
A1289.jpg 72" x 42" x 23-7/8" White whirlpool tub
Locke Part #: A1289 MFG Part #: 5772621-WH
6 jets, 3/4 HP motor, Beautiful white LASCOAT gelcoat finish Aquatic Co
B2910.jpg 7385.000.002 RELIANT 3 LAVA SPEED DRAIN CONNE
Locke Part #: B2910 MFG Part #: 7385.000.002
Cast Brass Waterway, Braided Flexible Supply Hoses with 3/8" Compression Connectors, Metal Lever Handle, Metal Speed Connect Pop-Up Drain, 47mm Ceramic Disc Valve Cartridge with an Adjustable Hot Limit Safety Stop, All Metal Construction, Water Conserving 1.5GPM Pressure-Compensating Aerator, Meets the ADA Guidelines AMERICAN STANDARD
B0279.jpg 8" Plug/Two Piece
Locke Part #: B0286 MFG Part #: 1042A
J B PRODUCTS/ALLEN DIVISION
B0347.jpg 8" x 1-1/4" Extension
Locke Part #: B0348 MFG Part #: 442-8
Chrome plated J B PRODUCTS/ALLEN DIVISION
Durable, easy to clean thermal formed cast acrylic, Tub bottoms are reinforced for no-flex strength, Mounted on pre-leveled feet for easy no-mudset installation, Grip Sure textured bottom, Exclusive safety suction return fitting, Premium Power-Flow Adjustable Jets -Adjustable flow rate and directional jets, Ease-Flow Adjustable Jets - Feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Hydro-Massage System: 4 Premium Power-Flow Adjustable Jets, 3 Lumbar Ease-Flow Adjustable Jets & 1 Foot Ease-Flow Adjustable Jet, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Most economical, Tall standard tub equipped with water tight door that allows you to enter effortlessly, Taller than standard tub with sculpted 17 high seat (ADA), allows the bather to remain in an upright position while being completely submerged in water, Water-tight, inward swinging door with Lifetime Guarantee on the seal gives users with limited mobility a safe and easy entry and exit, Easy door locking system, Rich, high gloss finish and slip resistant floor, Adjustable one-inch steel frame with adjustable feet, Replaces standard size tub with right or left hand drain and fits through a standard 32 bathroom doorway, Available in Soaker, Whirlpool, Air Bath and Combination Bath in both left and right-hand drain options, Cable waste and overflow standard on all configurations, Outstanding Protection 10 Year Warranty on shell, 5-Year labor warranty on all factory installed components, lifetime warranty on the door seal, Marine grade fiberglass., Outer finish is a double hand applied gel coat. Frame is one inch powder-coated steel. all hardware and door mechanisms are stainless steel., Water capacity 40-50 gallons with bather, Floor loading 450 lbs MANSFIELD PLUMBING PRODUCTS
Most economical, Tall standard tub equipped with water tight door that allows you to enter effortlessly, Taller than standard tub with sculpted 17 high seat (ADA), allows the bather to remain in an upright position while being completely submerged in water, Water-tight, inward swinging door with Lifetime Guarantee on the seal gives users with limited mobility a safe and easy entry and exit, Easy door locking system, Rich, high gloss finish and slip resistant floor, Adjustable one-inch steel frame with adjustable feet, Replaces standard size tub with right or left hand drain and fits through a standard 32 bathroom doorway, Available in Soaker, Whirlpool, Air Bath and Combination Bath in both left and right-hand drain options, Cable waste and overflow standard on all configurations, Outstanding Protection 10 Year Warranty on shell, 5-Year labor warranty on all factory installed components, lifetime warranty on the door seal, Marine grade fiberglass., Outer finish is a double hand applied gel coat. Frame is one inch powder-coated steel. all hardware and door mechanisms are stainless steel., Water capacity 40-50 gallons with bather, Floor loading 450 lbs MANSFIELD PLUMBING PRODUCTS
16 strategically placed air jets with check valves, Hygienic manual purge feature clears air lines of residual water, Heating element standard on air baths., Raised air button control easily turns blower on or off and controls the three speeds, Taller than standard tub with sculpted 17 high seat (ADA), allows the bather to remain in an upright, position while being completely submerged in water, Water-tight, inward swinging door with Lifetime Guarantee on the seal gives users with limited mobility, a safe and easy entry and exit., Easy door locking system, Rich, high gloss finish and slip resistant floor, Adjustable one-inch steel frame with adjustable feet, Replaces standard size tub with right or left hand drain and fits through a standard 32 bathroom doorway, Available in Soaker, Whirlpool., Air Bath and Combination Bath in both left and right-hand drain options, Cable waste and overflow standard on all, configurations, Outstanding Protection 10 Year Warranty on shell,, 5-Year labor warranty on all factory installed components, lifetime warranty on the door seal, Marine grade fiberglass., Outer finish is a double hand applied gel coat. Frame is one inch powder-coated steel. All hardware and door mechanisms are stainless steel., Water capacity 40-50 gallons with bather, floor loading 450 lbs, 120V, 8 amp, 3/4 HP blower MANSFIELD PLUMBING PRODUCTS
Completes the patented Innovator bath waste system, :, Quick, one-person installation., Test membranes on overflow and drain, elbows (testable to 5 stories/22psi), eliminate test balls or plugs., All corrosion-resistant components., Change finishes quickly with Watco, Quick Trim or Universal NuFit kits., Easy to snake or clean clogged drains, without fear of leaks (does not require, removing overflow screws or strainer, body)., Available in ABS or PVC; Flex Series in PVC only. ABS includes white ABS drain elbow., Innovator Overflow Features:, Self-cantering, self-aligning, self-sealing., No screws to corrode., Drain Features:, Integrated strainer body and drain., Eliminates one solvent-weld joint., No strainer body to install and corrode., Engineered crossbars improve draining over 15%., Push Pull stoppers., UPC listed., 900NSF-PP1-WH 900NSF-Series Stopper/Faceplate with Brass Pin:, Item, Part, Description, 11307WH, Plastic PP Knob - White, 11515, Plastic Pin (11512) & Friction Ring, (11504), 11290WH, Plastic Stopper - White, 1507, Stopper Seal 1-1/16 Dia., 13, 01004WH, Innovator Faceplate - plastic - White WATCO MFG CO
Completes the patented Innovator bath waste system, Quick, one-person installation., Test membranes on overflow and drain, elbows (testable to 5 stories/22psi), eliminate test balls or plugs., All corrosion-resistant components., Change finishes quickly with Watco, Quick Trim or Universal NuFit kits., Easy to snake or clean clogged drains, without fear of leaks (does not require, removing overflow screws or strainer, body)., Available in ABS or PVC; Flex Series in PVC only. ABS includes white ABS drain elbow., Innovator Overflow Features:, Self-cantering, self-aligning, self-sealing., No screws to corrode., Drain Features:, Integrated strainer body and drain., Eliminates one solvent-weld joint., No strainer body to install and corrode., Engineered crossbars improve draining over 15%., Push Pull stoppers., UPC listed., 901NRI-PVC Rough-In-Half Kit:, Item, Part, Description, 14013, Innovator Drain Crossbar, removable, 14007, Innovator Drain Elbow-Long (PVC), 10691, Innovator Drain Elbow Rubber Seal, 10671, Innovator Drain Elbow Slip Washer, 11480, Innovator Drain Elbow Retainer Nut, 10, 14020, Innovator, Overflow Elbow - Sch 40 PVC, 11, 10675, Overflow Elbow Gasket - Foam, 12, 11121, Retainer Star Nut for Innovator WATCO MFG CO
C0496.jpg A-31 Handle Gasket - 48 per box
Locke Part #: C0496 MFG Part #: 5301139
Sloan Valve Co
C0430.jpg A-41-A 1.6 Gallon Regal Closet Kit
Locke Part #: C0430 MFG Part #: 3301041
Sloan Valve Co
C0430.jpg A-42-A 1 Gallon Regal Urinal Kit
Locke Part #: C0431 MFG Part #: 3301044
Sloan Valve Co
C0499.jpg A-71 #2-Inside Cover
Locke Part #: C0499 MFG Part #: 0301168
KISSLER & CO
Sloan Valve Co
Sloan Valve Co
Sloan Valve Co
Sloan Valve Co
Sloan Valve Co
Sloan Valve Co
Sloan Valve Co
Sloan Valve Co
Large heavy duty noncorrosive drain is required. Adjustable flange. Fits 2" OD / 3" ID plastic pipe. SS Grid. IPS Corporation 767580061387
Large heavy duty noncorrosive drain is required. Adjustable flange. Fits 2" OD / 3" ID plastic pipe. SS Grid. IPS Corporation 767580061394
IPS Corporation 767580029035
IPS Corporation 767580029042
1-1/2 Tubular bath waste, turn overflow plate to operate drain plug. IPS Corporation 767580037801
1-1/2 Tubular bath waste, turn overflow plate to operate drain plug. IPS Corporation 767580037863
1-3/8" 16 Fine Thread or 1-1/2" -11-1/2" Pipe Thread. Kit includes brass bushing, overflow plate, Push-n-lift drain, converter bar, 2" & 2-1/2" brass screws IPS Corporation 767580055096
For fiberglass showers, 4-1/4" stainless steel strainer, with wrench. Jones Plumbing System. IPS Corporation 767580021282
For 2" DWV, PVC pipe. 4-1/2" flange diameter. PVC with PVC grid. IPS Corporation 767580016493
Low profile drain with plastic barrel and heavy abrass square plate. IPS Corporation 767580048739
Low profile drain with plastic barrel and heavy abrass square plate. IPS Corporation 767580017971
Large heavy duty noncorrosive drain is required. Adjustable flange. Fits 2" OD / 3" ID plastic pipe. SS Grid. IPS Corporation 767580017964
Fits most tubs 14" - 16" high. 1-1/2" PVC. Extra deep brass strainer for cast iron or plastic tubs. Theft resistant brass stopper for heavy duty use in hotels, motels & rental property. IPS Corporation 767580007996
For use on steel, fiberglass & plastic shower bases. Fits 2" schedule 40 pipe. PVC with Stainless Steel grid.a IPS Corporation 767580024320
For use on steel, fiberglass & plastic shower bases. Fits 2" schedule 40 pipe. PVC with Stainless Steel grid.a IPS Corporation 767580055591
IPS Corporation 767580024382
Low profile drain with plastic barrel and heavy abrass square plate. IPS Corporation 767580024573
Large heavy duty noncorrosive drain is required. Adjustable flange. Fits 2" OD / 3" ID plastic pipe. SS Grid. IPS Corporation 767580077876
PVC inner parts. New, fit-all design for steel, cast iron and plastic baths. All Plastic, 1-1/2 white PVC bath waste. IPS Corporation 767580042720
With brass strainer. 1-1/2" white PVC bath waste. IPS Corporation 767580007590
48ACTRI.jpg Acrylic Shower, 3-Piece, 48" W x 36" D x 84" H
Locke Part #: A1273 MFG Part #: 48AC-TRI LH WHT
Aquatic Co
Tub bottoms are reinforced for no-flex strength, Mounted on pre-leveled feet for easy no-mudset installation, Grip Sure textured bottom, Durable, easy to clean thermal formed cast acrylic MANSFIELD PLUMBING PRODUCTS
Tub bottoms are reinforced for no-flex strength, Mounted on pre-leveled feet for easy no-mudset installation, Grip Sure textured bottom, Durable, easy to clean thermal formed cast acrylic MANSFIELD PLUMBING PRODUCTS
C1802.jpg ADA Elongated bowl only, top spud
Locke Part #: C1802 MFG Part #: 3043.001.020 MADERA T/S
Elongated floor mount toilet, top and back spud, less seat, Conventional glazed, Fully glazed 2-1/8 trapway, 16-1/2 rim height for accessible applications, Condensation channel, Powerful direct-fed siphon jet action, 10" x 12" water surface area, 1-1/2" inlet spud, 2 bolt caps, Nominal Dimensions: 28-1/4" x 14" x 16-1/2 AMERICAN STANDARD
C0490.jpg ADA Sloan Handle
Locke Part #: C0490 MFG Part #: 0302390
Sloan Valve Co
Two convenient shelves and 18" towel bar, Includes left wall set only, requires right end wall and back wall to complete installation, Made from solid Vikrell material for strength, durability, and lasting beauty, Lightly textured swirl-gloss finish hides scratches from everyday use, Tongue-and-groove interlocking joints form a seamless appearance and simplify installation, Modular design allows it to be moved around corners and through doorways with ease, Wallset must be installed with baths 61030110 or 61030120 STERLING PLUMBING GROUP, INC
Two convenient shelves and 18" towel bar, Includes right end wall only, requires left end wall and back wall to complete installation, Made from solid Vikrell material for strength, durability, and lasting beauty, Lightly textured swirl-gloss finish hides scratches from everyday use, Tongue-and-groove interlocking joints form a seamless appearance and simplify installation, Modular design allows it to be moved around corners and through doorways with ease, Wallset must be installed with baths 61030110 or 61030120 STERLING PLUMBING GROUP, INC
Floor-mounted, back-outlet toilet combination bowl and tank less seat, EverClean Surface, Pressure-assisted siphon jet action, Elongated 16-1/8" high bowl for accessible applications, Fully glazed 2-1/8" trapway, 10" x 12" water surface area, Close-coupled flushometer tank, Chrome metal trip lever, Speed Connect tank/bowl coupling system, 4 bolt caps, Sanitary bar on bowl, Compliance Certifications:, ASME A112.19.2/CSA B45.1 for Vitreous China Fixtures AMERICAN STANDARD
Features, :, Alcove bath, Integral armrests, Ergonomic backrest, Integral tiling flange (3T), Integral skirt, Slip-resistant textured bottom, Left or right hand drain, Gelcoat surface, 5-year limited warranty Aquatic Co
Features, :, Alcove bath, Integral armrests, Ergonomic backrest, Integral tiling flange (3T), Integral skirt, Slip-resistant textured bottom, Left or right hand drain, Gelcoat surface, 5-year limited warranty Aquatic Co
Sloan Valve Co
Slip-resistant floor, Pre-leveled base, Lucite cast acrylic surface, Limited 10- year warranty, UL and IAPMO listed, Whirlpool, 8 whirlpool hydrotherapy jets, including:, o High-flow directional jets, o Low-profile spinning micro-jets, o .75 hp pump, o Pneumatic on/off control, o Advanced safety suction system, o Factory run-tested Aquatic Co
M2567.jpg Auto Metered Dispenser
Locke Part #: M2567 MFG Part #: TM96BX
Pulse II Dispenser Standard LED- Smart chip technology maximizes odor control effectiveness for 30 to 168 days Dispensers have a 10-year warranty MASSCO, INC
C0496.jpg B-39 Closet/Urinal Handle Seal Kit
Locke Part #: C0482 MFG Part #: 5302297
KISSLER & CO
C0496.jpg B50A Closet/Urinal Handle Repair Kit
Locke Part #: C0483 MFG Part #: 5302305
Sloan Valve Co
C0496.jpg B51A Triple Seal Handle Repair Kit
Locke Part #: C0445 MFG Part #: 3302306
Sloan Valve Co
DuraGuard Antimicrobial has properties built in to protect the seat from the growth of micro-organisms. Church Seat Co 73088025258
Vitreous china, Chrome trip lever, High Efficiency, Low Consumption (1.28 gpf), Meets definition of HET (High Efficiency Toilet), 10-1/4" rim height, 10" roughing-in, Round front siphon action bowl, Speed Connect tank / bowl coupling system, Sanitary dam on bowl, Fully glazed trapway, 2 color-matched bolt caps, 100% factory flush tested AMERICAN STANDARD
Vitreous china, Chrome trip lever, High Efficiency, Low Consumption (1.28 gpf), Meets definition of HET (High Efficiency Toilet), 10-1/4" rim height, 10" roughing-in, Round front siphon action bowl, Speed Connect tank / bowl coupling system, Sanitary dam on bowl, Fully glazed trapway, 2 color-matched bolt caps, 100% factory flush tested AMERICAN STANDARD
C1801.jpg Baby Devoro Top Spud Flushometer
Locke Part #: C1801 MFG Part #: 2282.001.020 BABY DEVORO
10-1/4" Rim Height AMERICAN STANDARD
A1423.jpg Batavia 60 x 42 x 20-1/2 whirlpool tub
Locke Part #: A1423 MFG Part #: 6660621-WH W/MAIN HTR
7 Year Limited Warranty, 6 Jets, 3/4 HP Motor, 2 Silent Air Controls, Pneumatic On/Off Control, Advanced Safety Suction System, Color Matched Trim, Integral Armrests, Slip-Resistant Bottom Aquatic Co
Specifications:, ADA, Compliant, Battery Powered, Sensor Activated, Chrome Plated Cast Brass, Pedestal Hand Washing, Faucet with the following features:, Splash-proof Circuit Control Module, Sensor Range Adjustment Screw, Low Battery LED Indicator Light, User friendly Variable Time Out Settings, Filtered Solenoid Valve with serviceable Strainer Filter, Bak-Chek Tee for Hot/Cold Supply, Vandal Resistant Spray Head with Pressure Compensating Flow Control, Metal Jacketed Wire Protection for Sensor Lead, Includes appropriate Mounting Hardware, Mounts on a single-hole lavatory or deck, Optional 6 VDC Plug-in Transformer available (Batteries act as backup when using optional transformer, Indicator Lights: Range Adjustment/Low Battery, Solenoid Valve: Filtered Solenoid Valve with serviceable Strainer Filter, Max. Distance Control Module may be Installed from Spout: With Standard Cable: 15 (381 mm), Warranty: 3 year (limited), Compliant to: ASME A112.18.1M Sloan Valve Co
Slip-resistant floor, Factory run-tested, Pre-leveled base, Universal drain, Lucite cast acrylic surface, Limited 10- year warranty, Pneumatic on/off control., 75 hp pump, Advanced safety suction system, 8 hydrotherapy jets: High-flow directional jets and Low-profile spinning micro-jets Aquatic Co
ARMREST WHIRLPOOL.jpg Biscuit 5’ x 5’ corner tub
Locke Part #: A0120 MFG Part #: BRA-42 BISCUIT
Armrest tub, 77 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
320.jpg Biscuit Color Pedestal
Locke Part #: B1036 MFG Part #: 319 BISCUIT
Designer combination lavatory and pedestal, Essence pedestal features a timeless design inspired in classic form, 25-1/2" x 21-3/4" single hole pedestal lavatory allows ample side space to accommodate toiletries, Full 33-5/8" luxury height fits all statures and ages, Integrated back splash, Integral rear overflow, Optional, removable chrome-finished towel bar, The Mansfield limited lifetime warranty, Meets or exceeds ANSI/ASME A112.19.2, Meets or exceeds Canadian Standards Association CSA B45.0.0 MANSFIELD PLUMBING PRODUCTS
A0657.jpg Blue Cold
Locke Part #: A0658 MFG Part #: 11-7346 COLD
H/C Water Cartridges KISSLER & CO
C0001.jpg Bone Elongated ADA 17-1/4" bowl rim height
Locke Part #: C0008 MFG Part #: B872 BONE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
C0001.jpg Bone Elongated bowl
Locke Part #: C0007 MFG Part #: B832 BONE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
C0001.jpg Bone Round Front Bowl
Locke Part #: C0005 MFG Part #: B822 BONE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
C0001.jpg Bone Tank
Locke Part #: C0006 MFG Part #: T8ULF-HP BONE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
A0378.jpg Brass
Locke Part #: A0378 MFG Part #: 1200B
Magnum single handle faucet cartridge. Moen Incorporated
A2263.jpg Brass 1 Lever Cartridge
Locke Part #: A2263 MFG Part #: AB46-0012
KISSLER & CO
J B PRODUCTS/ALLEN DIVISION 644132904050
A2600.jpg Brush Nickel With Grid Strainer
Locke Part #: A2601 MFG Part #: 48700-PP-BN-G-WBO-C
Eliminate The Need To Remove Old, Strainer Bodies!, Choose from Grid Strainer (top) or standard bottom) strainer bodies., Kits include:, 1-Hole Overflow Plate, Adapter Bar, Overflow Plate Screw, 2.25 , Universal NuFit Stopper Assembly, Universal NuFit Body, Silicone Pouch for NuFit WATCO MFG CO
A2600.jpg Brushed Chrome With Grid Strainer
Locke Part #: A2603 MFG Part #: 48700-PP-CB-G-WBO-C
Eliminate The Need To Remove Old, Strainer Bodies!, Choose from Grid Strainer (top) or standard bottom) strainer bodies., Kits include:, 1-Hole Overflow Plate, Adapter Bar, Overflow Plate Screw, 2.25 , Universal NuFit Stopper Assembly, Universal NuFit Body, Silicone Pouch for NuFit WATCO MFG CO
A2600.jpg Brushed Chrome With standard Strainer
Locke Part #: A2613 MFG Part #: 48700-PP-CB-WBO-C
Eliminate The Need To Remove Old, Strainer Bodies!, Choose from Grid Strainer (top) or standard bottom) strainer bodies., Kits include:, 1-Hole Overflow Plate, Adapter Bar, Overflow Plate Screw, 2.25 , Universal NuFit Stopper Assembly, Universal NuFit Body, Silicone Pouch for NuFit WATCO MFG CO
A0604.jpg Brushed Nickel Lift & Turn Nufit™ Trim Kit
Locke Part #: A0605 MFG Part #: 48400-BN-C
Eliminate the need to remove old strainer bodies! WATCO MFG CO
A2600.jpg Brushed Nickel With standard Strainer
Locke Part #: A2611 MFG Part #: 48700-PP-BN-WBO-C
Eliminate The Need To Remove Old, Strainer Bodies!, Choose from Grid Strainer (top) or standard bottom) strainer bodies., Kits include:, 1-Hole Overflow Plate, Adapter Bar, Overflow Plate Screw, 2.25 , Universal NuFit Stopper Assembly, Universal NuFit Body, Silicone Pouch for NuFit WATCO MFG CO
C1747.jpg Cadet 3 flush valve
Locke Part #: C1747 MFG Part #: 738921-100.0070A
Vitreous china, Permanent Everclean surface, Featuring the Cadet 3 Flushing System, 16-1/2" rim height available for accessible application, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Close-coupled tank with flat tank cover for superior storage, Oversized 3" flush valve with chemical resistant flapper, New sanitary dam on bowl with four point tank stabilization AMERICAN STANDARD
Features the Cadet Flushing System, Vitreous china, Space saving elongated bowl fits in space of a round front, High Efficiency Toilet (HET), ultra-low consumption (4.8 Lpf/1.28 gpf), utilizes 20% less water, Meets EPA WaterSense criteria, Trade exclusive tank, PowerWash rim scrubs bowl with each flush, Metal trip lever, Robust metal trip lever & metal shank fill valve, Includes EZ-Install Tools w/color match bowl caps, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, 16-1/2" rim height for accessible applications, 14" (356mm) rough-in, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g Map Score at 1.28gpf, 5 year warranty, ADA Compliant, Compliance:, ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures, US EPA WaterSense Specification for HETs AMERICAN STANDARD
A2490.jpg Cartridge
Locke Part #: A2490 MFG Part #: PB-6804
KISSLER & CO
C2900.jpg Cartridge (Fits All Series Except 200)
Locke Part #: C2900 MFG Part #: C100500-K
FLUSHMATE
D0559.jpg Cartridge for 537-5450-00 Eljer Faucet
Locke Part #: D0559 MFG Part #: 46-6006
KISSLER & CO
KISSLER & CO
C0001.jpg Cashmere Elongated ADA 17-1/4" bowl rim height
Locke Part #: C0014 MFG Part #: B872 CASHMERE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
C0001.jpg Cashmere Elongated bowl
Locke Part #: C0013 MFG Part #: B832 CASHMERE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
C0001.jpg Cashmere Round Front Bowl
Locke Part #: C0009 MFG Part #: B822 CASHMERE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
C0001.jpg Cashmere Tank
Locke Part #: C0012 MFG Part #: T8ULF-HP CASHMERE
Exclusive Vortex-Jet flush action provides a Full Force Flush and exceptional bowl cleaning performance on 1.6 gal. per flush., Full size water surface and seal, Sani-Glazed trapway, Quik-Install tank to bowl fittings, 3" Flapper WESTERN POTTERY LLC
A1425.jpg Cavalcade 60 x 60 x 22 whirlpool tub
Locke Part #: A1425 MFG Part #: 3860621V-WH
7 Year Limited Warranty, 6, Jets. 3/4 HP Motor, 2 Silent Air Controls, Pneumatic On/Off Control, Advanced Safety Suction System, Color Matched Trim, Integral Armrests, Slip-, Resistant Bottom Aquatic Co
Praxis Companies
B2944.jpg Centerset Faucet Chrome
Locke Part #: B2945 MFG Part #: 7038.201.002
1/4 turn washerless ceramic disc valve cartridges, Brass spout, Durable cast brass waterways with 1/2" male inlet shanks, Water-conserving 1.5 gpm/5.7 L/min. pressure-compensating aerator, Metal lever handles, Metal Speed Connect pop-up drain AMERICAN STANDARD
Cast brass waterway, 47 mm ceramic disc valve cartridge with an adjustable hot limit safety stop, Water-conserving 1.5 gpm/5.7 L/min. pressure-compensating aerator, Metal lever handle, Braided flexible supply hoses with 3/8 compression connectors, Metal Speed Connect pop-up drain AMERICAN STANDARD
B2912.jpg Centerset Faucet Satin Nickel
Locke Part #: B2912 MFG Part #: 7385.000.295
Cast brass waterway, 47 mm ceramic disc valve cartridge with an adjustable hot limit safety stop, Water-conserving 1.5 gpm/5.7 L/min. pressure-compensating aerator, Metal lever handle, Braided flexible supply hoses with 3/8 compression connectors, Metal Speed Connect pop-up drain AMERICAN STANDARD
B2920.jpg Centerset Lavatory Faucet
Locke Part #: B2920 MFG Part #: 5500.170.002
Solid Brass Construction and Washerless Ceramic Disc Valve Cartridges, 1/2" Male Threaded Inlet Shanks with Brass Coupling Nuts, Water Conserving 1.5 GPM, Cast Brass Spout: 3-3/4" Reach, 1-3/4" Height to Outlet, Vandal Resistant Brass Handles, Less Drain, Meets the ADA Guidelines AMERICAN STANDARD
C1700.jpg Champion®4 Flush Valve Assembly
Locke Part #: C1711 MFG Part #: 3174.105.0070A
It achieves the highest bulk removal rating of 1,000 grams and will even flush a bucket of golf balls!, Permanent Everclean surface, 4 non-adjustable, piston action Accelerator flush valve, 16-1/2 ADA rim height available AMERICAN STANDARD
Solid plastic seat with cover, Slow close feature for user convenience, Easy lift off cleaning feature allows simple removal and reattachment without tools, Attractive design coordinates with popular bathroom decors, Fits all conventional elongated and round front toilets, Complete with bolts, nuts, and dual-faced adhesive washers AMERICAN STANDARD
Features Champion Flushing System, Vitreous china, High Efficiency Toilet (HET), ultra-low consumption (1.28 gpf/4.8 Lpf), utilizes 20% less water, Trade exclusive tank, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & metal shank fill valve, Includes EZ-Install tools w/color match bowl caps, EverClean Surface included, 4" piston-action Accelerator flush valve, Fully-glazed 2-3/8" trapway, 12" (305mm) rough-in, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.28gpf, 10 year warranty, ADA Compliant, Compliance:, ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures, US EPA WaterSense Specification for HETs AMERICAN STANDARD
Features Champion Flushing System, Vitreous china, Low consumption (1.6 gpf/6.0 Lpf) toilet, Trade exclusive tank, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & metal shank fill valve, Includes EZ-Install tools w/color match bowl caps, EverClean surface included, 4" piston-action Accelerator flush valve, Fully-glazed 2-3/8" trapway, 12" (305mm) rough-in, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6gpf, 10 year warranty, Compliance:, ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures AMERICAN STANDARD
Features Champion Flushing System, Vitreous china, Low consumption (1.6 gpf/6.0 Lpf) toilet, Trade exclusive tank, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & metal shank fill valve, Includes EZ-Install tools w/color match bowl caps, EverClean surface included, 4" piston-action Accelerator flush valve, Fully-glazed 2-3/8" trapway, 12" (305mm) rough-in, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6gpf, 10 year warranty, Compliance:, ASME A112.19.2-2008/CSA B45.1-08 for Vitreous China Fixtures AMERICAN STANDARD
3195A.101.jpg Champion PRO Right Height Elongated 1.28 gpf Toilet, Bowl, Linen
Locke Part #: C1724 MFG Part #: 3195A.101.222<