Loading ...

Search in: Fittings & Nipples Category

1 1/2 X 1/2 CXCXC TEE
Locke Part #: H0103 MFG Part #: W 04088
Mueller
1 1/4 X 1/2 CXCXC TEE
Locke Part #: H0089 MFG Part #: W 04071
Mueller
1 1/4 X 3/4 FITTING XC REDUCER
Locke Part #: H0246 MFG Part #: W 01345
Mueller
1 lb. Anode
Locke Part #: F0904 MFG Part #: KH1-1 1#H1
For grounding wrapped steel gas lines., Use with clamps below. Check local code for weight of Anode to be used. MESA PRODUCTS
1" "T" INC FNPT Swivel x Comp.
Locke Part #: M4507 MFG Part #: 74783ST 1"
AY McDonald
1" Angle Meter Stop
Locke Part #: M4501 MFG Part #: 74602T 1"
AY McDonald
1" AWWA x Mac Pak CTS Comp.
Locke Part #: M4516 MFG Part #: 74701-22 1"
AY McDonald
1" Coupler
Locke Part #: R1803 MFG Part #: PEI0436
John Guest
1" Coupling CTS x FIP
Locke Part #: M4543 MFG Part #: 5141-135
AY McDonald
1" CTS Compression
Locke Part #: M4524 MFG Part #: 74758-22 1"
AY McDonald
1" CTS Compression x 1" PVC Compression
Locke Part #: M4528 MFG Part #: 74758-22-44 1"
AY McDonald
1" CTS Curb Stop x FIP
Locke Part #: M4527 MFG Part #: 76102-22 1"
AY McDonald
1" CTS Elbow
Locke Part #: R1823 MFG Part #: PEI0336
John Guest
1" CTS End Cap
Locke Part #: R1862 MFG Part #: PSEI4636
John Guest
1" CTS Union Tee
Locke Part #: R1835 MFG Part #: PEI0236
John Guest
1" CTS x 1" NTP
Locke Part #: R1817 MFG Part #: PSEI013628
John Guest
1" CTS x 3/4" FIP Coupling
Locke Part #: M4544 MFG Part #: 74754-22 3/4 x 1
AY McDonald
1" CTS x MIP Adapter
Locke Part #: M4519 MFG Part #: 74753-22 1"
AY McDonald
1" Insulated Union
Locke Part #: F0816 MFG Part #: 100 5102
Black., For insulating gas lines. GF Central Plastics
1" IPS Coupling
Locke Part #: R1171 MFG Part #: 3259-52-1014-00
Continental Industries
1" IPS Normac Flex-Riser For Gas Supply
Locke Part #: R1151 MFG Part #: XR-21J-16-36-ZDC
ANODELESS design requires no additional corrosion protection, Securely joins polyethylene pipe to above ground metal piping, FLEXIBLE steel casing protects polyethylene pipe from external damage, Eliminates underground joints, Installed using just two pipe wrenches, 125 psig, Simple, quick, reliable WESTWAY SALES
1" IPS Tees
Locke Part #: R1181 MFG Part #: 3259-50-1014-00
Continental Industries
1" IPS x NPT Transition
Locke Part #: R1161 MFG Part #: 4646-00-1914-25
Continental Industries
1" Mac Pak x 3/4" MIP
Locke Part #: M4520 MFG Part #: 74753-22 1X 3/4
AY McDonald
1" Oetiker clamp
Locke Part #: R1757 MFG Part #: 1" X 2300SSC
AY McDonald
1" R&L Coupling
Locke Part #: F1502 MFG Part #: ZMBRLC05
For Texas unions. One side has a right handed thread and one side has a left handed thread. Matco-Norca
1" Stab Lok Riser
Locke Part #: R1131 MFG Part #: 1453-91-4614-25
These are required in most cities in Texas. Continental Industries
1" Stainless Steel Crimp Ring
Locke Part #: R1756 MFG Part #: 47014 16700042
Flair-It Fittings
1" Swivel x MIP Coupling
Locke Part #: M4537 MFG Part #: 74621 1"
AY McDonald
1" Swivel x MIP Coupling
Locke Part #: M4540 MFG Part #: 74624 1"
AY McDonald
1-1/2" Insulated Union
Locke Part #: F0822 MFG Part #: 100 5108
Black., For insulating gas lines. GF Central Plastics
1-1/4" Insulated Union
Locke Part #: F0817 MFG Part #: 100 5104
Black., For insulating gas lines. GF Central Plastics
1-1/4" IPS Normac Flex-Riser For Gas Supply
Locke Part #: R1152 MFG Part #: XR-27G-20-36-ZDC
ANODELESS design requires no additional corrosion protection, Securely joins polyethylene pipe to above ground metal piping, FLEXIBLE steel casing protects polyethylene pipe from external damage, Eliminates underground joints, Installed using just two pipe wrenches, 125 psig, Simple, quick, reliable WESTWAY SALES
1-1/4" Stab Lok Riser
Locke Part #: R1132 MFG Part #: 9953-996-0503-25
These are required in most cities in Texas. Continental Industries
1/2 FIP X 1/2 MIP ADAPTER
Locke Part #: H0665 MFG Part #: 120-8X
BrassCraft 26613146249
1/2 Lb. Magnesium Drive-in Anode No-clamp
Locke Part #: F0906 MFG Part #: KMAG-1/2#DRVN
For grounding wrapped steel gas lines., Use with clamps below. Check local code for weight of Anode to be used. MESA PRODUCTS
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613135380
1/2" Coupler
Locke Part #: R1800 MFG Part #: PEI0420
John Guest
1/2" CTS Elbow
Locke Part #: R1820 MFG Part #: PEI0320
John Guest
1/2" CTS End Cap
Locke Part #: R1860 MFG Part #: PSEI4620
John Guest
1/2" CTS Union Tee
Locke Part #: R1830 MFG Part #: PEI0220
John Guest
1/2" CTS x 1/2" NPS
Locke Part #: R1809 MFG Part #: PEIBTC2034
John Guest
1/2" CTS x 1/2" NPS
Locke Part #: R1810 MFG Part #: PEISTC2034
John Guest
1/2" CTS x 1/2" NPTF
Locke Part #: R1850 MFG Part #: MWI012024 LF
John Guest
1/2" CTS x 1/2" NTP
Locke Part #: R1815 MFG Part #: PSEI012024
John Guest
1/2" CTS x 3/4" NTP
Locke Part #: R1818 MFG Part #: PSEI012026
John Guest
1/2" CTS x 7/8"- 15/16"
Locke Part #: R1812 MFG Part #: PEISTC20C75
John Guest
1/2" Flair-It Pex Coupling
Locke Part #: R1626 MFG Part #: 06840
Couplings with Flair-It conn on both ends. Flair-It Fittings
1/2" Flair-It x 1/2" FPT Pex Adapter
Locke Part #: R1635 MFG Part #: 06841
With female threads and a Flair-It conn. Flair-It Fittings
1/2" Flair-It x 3/4" FPT Pex Adapter
Locke Part #: R1637 MFG Part #: 06858
With female threads and a Flair-It conn. Flair-It Fittings
Used to convert the flare outlet of a water stop to a compression connection, May also be used with instrumentation, hydraulic, and pneumatic systems., Designed for use with aluminum, copper, and plastic tubing. Not intended for use with steel tubing. GENE RICH
1/2" Insert x 1/2" FPT Brass Swivel
Locke Part #: R1453 MFG Part #: 41196
Flair-It Fittings
1/2" Insert x FPT Drop 2 Ear
Locke Part #: R1462 MFG Part #: LF6225908089800
JMF Company
1/2" Insulated Union
Locke Part #: F0814 MFG Part #: 10003374
Black., For insulating gas lines. GF Central Plastics
1/2" Oetiker clamp
Locke Part #: R1751 MFG Part #: 1/2 2300SSC
AY McDonald
1/2" Pex Barb x PB Barb With Rings
Locke Part #: R1401 MFG Part #: LF6217908089900
JMF Company
1/2" Pex Flair-It Straight Stop Valve
Locke Part #: R1686 MFG Part #: 06880
An in-line valve with Flair-It connections on both ends. Flair-It Fittings
1/2" PEX X 1/2" FIP Female Non Swivel Adapter
Locke Part #: R1402 MFG Part #: LF6217912129800
JMF Company
1/2" Pex x 1/2" FPT Female Elbow
Locke Part #: R1605 MFG Part #: 06802
Elbow with pipe thread and a Flair-It connection. Flair-It Fittings
A faucet connection to a Flair-It connection. Flair-It Fittings
1/2" Pex x 1/2" FPT Swivel
Locke Part #: R1767 MFG Part #: LF6227408089800
JMF Company
1/2" Pex x 1/2" FPT Swivel 90° Elbow
Locke Part #: R1608 MFG Part #: 06816
Faucet connection to Flair-It connection. Flair-It Fittings
With male threads & a Flair-It connection. Flair-It Fittings
1/2" Pex x 1/2" MPT Male Elbow
Locke Part #: R1604 MFG Part #: 06803
Elbow with pipe thread and a Flair-It connection. Flair-It Fittings
1/2" Pex x 1/2" Pex 90° Elbow
Locke Part #: R1600 MFG Part #: 06800
Elbows with Flair-It connections on both ends. Flair-It Fittings
Used to connect washing machine hose to Pex or polybutylene tubing. Flair-It Fittings
Flair-It Fittings
With male threads & a Flair-It connection. Flair-It Fittings
1/2" Plug
Locke Part #: R1678 MFG Part #: 06863
Flair-It Fittings
1/2" Speedfit Male x 1/2" NPFT
Locke Part #: H0906 MFG Part #: PP011624W
John Guest
1/2" Speedfit Male x 3/8" NPFT
Locke Part #: H0905 MFG Part #: PP011623W
John Guest
1/2" Speedfit Union Connect
Locke Part #: H0972 MFG Part #: PP0416W
John Guest
1/2" Speedfit Union Elbow
Locke Part #: H0932 MFG Part #: PP0316W
John Guest
1/2" Speedfit Union Tee
Locke Part #: H0912 MFG Part #: PP0216W
John Guest
Product Image Not Available 1/2" Washer for F0778 & F0775
Locke Part #: F1775 MFG Part #: P-450T-03G
Matco-Norca
1/2" x 1/2" x 1/2" Pex Tee
Locke Part #: R1611 MFG Part #: 06820
Tees, with 3 Flair-It connections. Flair-It Fittings
1/2" x 1/2" x 3/8" Pex Tee
Locke Part #: R1617 MFG Part #: 06830
Tees, with 3 Flair-It connections. Flair-It Fittings
1/2" x 3/8" Flair-It Pex Coupling
Locke Part #: R1628 MFG Part #: 06853
Couplings with Flair-It conn on both ends. Flair-It Fittings
1/2" x 3/8" Reducing Elbow
Locke Part #: H0942 MFG Part #: PP211612W
John Guest
1/2" x 3/8" Reducing Union
Locke Part #: H0983 MFG Part #: PP201612W
John Guest
1/2" x 5/16" Reducing Union
Locke Part #: H0982 MFG Part #: PI201610S
John Guest
1/2-in Flare Nut
Locke Part #: H0508 MFG Part #: 141S-8
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. BrassCraft 26613005744
1/2-in OD Flare x 1/2-in FIP Adaptor
Locke Part #: H0518 MFG Part #: 46-8-8
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005270
1/2-in OD Flare x 1/2-in MIP Adaptor
Locke Part #: H0538 MFG Part #: 48-8-8
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005430
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005041
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005140
1/2-in OD Flare x 3/4-in FIP Adaptor
Locke Part #: H0519 MFG Part #: 46-8-12
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005287
1/2-in OD Flare x 3/4-in MIP Adaptor
Locke Part #: H0539 MFG Part #: 48-8-12
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005447
1/2-in OD Short Flare Nut
Locke Part #: H0502 MFG Part #: 41S-8
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613004990
1/2-in OD Tube Sleeves
Locke Part #: H0577 MFG Part #: 60-8
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. BrassCraft 26613005966
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613135533
One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, 100% Leak tested, No Lead, Corrosion-resistant handle is plated in an attractive chrome finish, Positive 1/4 turn shut off, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, PEX end designed to ASTM F1960, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F. BrassCraft
1/4 X 3/16 CXC RED 3/8X5/16 OD
Locke Part #: H0270 MFG Part #: W 01004
Mueller
1/4 x 3/8 x 3/8 Angle Stop Valve
Locke Part #: H1052 MFG Part #: ASVPP1LF
John Guest
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
1/4" OD x 1/4" FFL Brass Speedfit
Locke Part #: H0968 MFG Part #: MI4508F4SLF
John Guest
1/4" Speedfit End Stop Cap
Locke Part #: H0960 MFG Part #: PI4608S
John Guest
1/4" Speedfit Locking Clip
Locke Part #: H1055 MFG Part #: PIC1808R
John Guest
1/4" Speedfit Male x 1/4" NPFT
Locke Part #: H0901 MFG Part #: PP010822W
John Guest
1/4" Speedfit Male x 3/8" NPFT
Locke Part #: H0913 MFG Part #: PP010823W
John Guest
1/4" Speedfit Straight Valve
Locke Part #: H1050 MFG Part #: PPSV040808W
John Guest
1/4" Speedfit Union Connect.
Locke Part #: H0970 MFG Part #: PP0408W
John Guest
1/4" Speedfit Union Elbow
Locke Part #: H0930 MFG Part #: PP0308W
John Guest
1/4" Speedfit Union Tee
Locke Part #: H0910 MFG Part #: PP0208W
John Guest
1/4" Speedfit x 1/2" Faucet Shank Connector
Locke Part #: H1010 MFG Part #: CI320814S
John Guest
1/4" Speedfit x 1/4" NPFT Elbow
Locke Part #: H0953 MFG Part #: PP480822W
John Guest
1/4-in Compression Cap
Locke Part #: H0574 MFG Part #: 61CP-4X
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613154411
1/4-in Compression Sleeves
Locke Part #: H0575 MFG Part #: 60-4
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. BrassCraft 26613005928
1/4-in Flare Nut
Locke Part #: H0506 MFG Part #: 141S-4
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. BrassCraft 26613005720
1/4-in OD Flare Cap
Locke Part #: H0490 MFG Part #: 40-4
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines, Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613004914
1/4-in OD Flare x 1/4-in MIP Adaptor
Locke Part #: H0528 MFG Part #: 48-4-4
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005348
BrassCraft 26613005010
1/4-in OD Short Flare Nut
Locke Part #: H0500 MFG Part #: 41S-4
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613004952
1/4-in OD Tube Compression Union
Locke Part #: H0620 MFG Part #: 62-4X
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613135403
1/4-in OD Tube Nut
Locke Part #: H0570 MFG Part #: 61-4
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613006055
GPK PRODUCTS
12 diameter full grate, 54 square inch flow, 1 thick, Will fit any size deep sump floor sink, Available in plastic and cast metal, Plastic also available in half, and three-quarter grate patterns, Screws included Diverse Corporate Technologies
12 diameter full grate, 54 square inch flow, 1 thick, Will fit any size deep sump floor sink, Available in plastic and cast metal, Plastic also available in half, and three-quarter grate patterns, Screws included Diverse Corporate Technologies
2 X 1 FITTING X C REDUCER
Locke Part #: H0253 MFG Part #: W 01370
Mueller
2" Insert Plug
Locke Part #: R0809 MFG Part #: 85005
DWV plastic insert plugs used to close off drains for pressure test. IPS Corporation
2" Insulated Union
Locke Part #: F0818 MFG Part #: 100 5106
Black., For insulating gas lines. GF Central Plastics
2" IPS Coupling
Locke Part #: R1173 MFG Part #: 3259-52-1017-00
Continental Industries
2" IPS Normac Flex-Riser For Gas Supply
Locke Part #: R1153 MFG Part #: XR-38M-32-36-ZDC
ANODELESS design requires no additional corrosion protection, Securely joins polyethylene pipe to above ground metal piping, FLEXIBLE steel casing protects polyethylene pipe from external damage, Eliminates underground joints, Installed using just two pipe wrenches, 125 psig, Simple, quick, reliable WESTWAY SALES
2" IPS Tees
Locke Part #: R1183 MFG Part #: 3259-50-1017-00
Continental Industries
2" Stab Lok Riser
Locke Part #: R1145 MFG Part #: 1752-91-4617-25
These are required in most cities in Texas. Continental Industries
2190M 1/2 Quick Connect Elbow x MIP
Locke Part #: H0376 MFG Part #: 4426-010
Mueller
Product Image Not Available 2x3x3 DOWNSPOUT ADPTR SDR-35
Locke Part #: R0233 MFG Part #: P1903
STAN ROBERTS
Product Image Not Available 2x3x4 DOWNSPOUT ADPTR SDR-35
Locke Part #: R0234 MFG Part #: P1904
STAN ROBERTS
Product Image Not Available 3" 1/16 BEND SDR-35 S/W
Locke Part #: R0232 MFG Part #: P1703
22-1/2 (1/16) bend STAN ROBERTS
Product Image Not Available 3" 1/4 BEND LONG SDR-35 S/W
Locke Part #: R0215 MFG Part #: P255
STAN ROBERTS
Product Image Not Available 3" 1/8 BEND SDR-35 S/W
Locke Part #: R0214 MFG Part #: P502
45 (1/8) bend STAN ROBERTS
Product Image Not Available 3" CAP SDR-35 S/W
Locke Part #: R0231 MFG Part #: P1603
STAN ROBERTS
Product Image Not Available 3" COUPLING SDR-35 S/W
Locke Part #: R0218 MFG Part #: P602
STAN ROBERTS
Product Image Not Available 3" FITTING CLEANOUT SDR-35
Locke Part #: R0230 MFG Part #: P1503
Less Plug STAN ROBERTS
14 x 14 square top, 54 square flow area., 12 diameter grate available in full plastic, aluminium, brass or nickel, and 1/2 and 3/4 plastic., Aluminium beehive secondary strainer., 5.5 deep sump area, Made of corrosive resistant plastic, Fits over 3 Schedule 40 DWV pipe., Interior surfaces are smooth and sloped for maximum flow (no corners or flat areas)., Threaded metal inserts for attaching grate. Diverse Corporate Technologies
Product Image Not Available 3" SAN TEE SDR-35 S/W
Locke Part #: R0216 MFG Part #: P155
STAN ROBERTS
Product Image Not Available 3" TEE SDR-35 S/W
Locke Part #: R0828 MFG Part #: P102
STAN ROBERTS
Product Image Not Available 3" WYE SDR-35 S/W
Locke Part #: R0217 MFG Part #: P302
45 High PVC STAN ROBERTS
3/16 CXC COUPLING 5/16 OD
Locke Part #: H0265 MFG Part #: W 01001
Mueller
3/4 X 1/2 FITTING X C REDUCER
Locke Part #: H0240 MFG Part #: WB01326
Mueller
3/4" "22" CTS Comp. Meter Elbow
Locke Part #: M4542 MFG Part #: 74783S-22 3/4
AY McDonald
3/4" AWWA x 3/4" Flare Corporation Stop
Locke Part #: M4556 MFG Part #: 74701 3/4
AY McDonald
3/4" Brass Relief Valve, 180°F Max. Temperature
Locke Part #: M4558 MFG Part #: 6214 3/4" 30#
AY McDonald
3/4" Coupler
Locke Part #: R1801 MFG Part #: PEI0428
John Guest
3/4" Coupling CTS x FIP
Locke Part #: M4529 MFG Part #: 74754-22 3/4
AY McDonald
3/4" CTS Compression
Locke Part #: M4522 MFG Part #: 74758-22 3/4
AY McDonald
3/4" CTS Compression x 1" CTS Compression
Locke Part #: M4535 MFG Part #: 74578-22 3/4 X 1
AY McDonald
3/4" CTS Curb Stop x FIP
Locke Part #: M4526 MFG Part #: 76102-22 3/4
AY McDonald
3/4" CTS Elbow
Locke Part #: R1821 MFG Part #: PEI0328
John Guest
3/4" CTS End Cap
Locke Part #: R1861 MFG Part #: PSEI4628
John Guest
3/4" CTS Union Tee
Locke Part #: R1831 MFG Part #: PEI0228
John Guest
3/4" CTS x 1" IPS Coupling
Locke Part #: M4525 MFG Part #: 74758-22 44 3/4 X 1
AY McDonald
3/4" CTS x 3/4" IPS Coupling
Locke Part #: M4523 MFG Part #: 4142160
AY McDonald
3/4" CTS x 3/4" NPTF
Locke Part #: R1852 MFG Part #: MWI012826 LF
John Guest
3/4" CTS x 3/4" NTP
Locke Part #: R1816 MFG Part #: PSEI012826
John Guest
3/4" Flair-It Pex Coupling
Locke Part #: R1627 MFG Part #: 06846
Couplings with Flair-It conn on both ends. Flair-It Fittings
3/4" Flair-It x 3/4" FPT Pex Adapter
Locke Part #: R1636 MFG Part #: 06847
With female threads and a Flair-It conn. Flair-It Fittings
3/4" Insert x 1/2" MPT Brass
Locke Part #: R1444 MFG Part #: PXMA0403
Matco-Norca
3/4" Insert x 3/4" Sweat
Locke Part #: R1432 MFG Part #: PXMAS040LF
Matco-Norca
3/4" Insulated Union
Locke Part #: F0815 MFG Part #: 100 5100
Black., For insulating gas lines. GF Central Plastics
3/4" IPS Coupling
Locke Part #: R1170 MFG Part #: 3259-52-1013-00
Continental Industries
3/4" IPS Normac Flex-Riser For Gas Supply
Locke Part #: R1150 MFG Part #: XR-17C-12-36-ZDC
ANODELESS design requires no additional corrosion protection, Securely joins polyethylene pipe to above ground metal piping, FLEXIBLE steel casing protects polyethylene pipe from external damage, Eliminates underground joints, Installed using just two pipe wrenches, 125 psig, Simple, quick, reliable WESTWAY SALES
3/4" IPS Tees
Locke Part #: R1180 MFG Part #: 3259-50-1013-00
Continental Industries
3/4" IPS x NPT Transition
Locke Part #: R1160 MFG Part #: 4646-00-1913-25
Continental Industries
3/4" MIP x Mac Pak
Locke Part #: M4517 MFG Part #: 74753-22 3/4
AY McDonald
3/4" Oetiker clamp
Locke Part #: R1754 MFG Part #: 3/4 2300SSC
AY McDonald
3/4" Pex Barb x PB Barb With Rings
Locke Part #: R1403 MFG Part #: 41251
Flair-It Fittings
3/4" PEX X 1/2" FIP Female Non-Swivel Adapter
Locke Part #: R1429 MFG Part #: LF6210512089800
JMF Company
With male threads & a Flair-It connection. Flair-It Fittings
3/4" Pex x 3/4" Pex 90° Elbow
Locke Part #: R1601 MFG Part #: 06806
Elbows with Flair-It connections on both ends. Flair-It Fittings
3/4" Pex x 3/4" Polybutylene Adapter
Locke Part #: R1630 MFG Part #: 26790
Pex to polybutylene transition. 3 PER PACKAGE. Flair-It Fittings
3/4" Stab Lok Riser
Locke Part #: R1130 MFG Part #: 1353-91-4613-25
These are required in most cities in Texas. Continental Industries
3/4" Swivel x MIP Coupling
Locke Part #: M4536 MFG Part #: 74621 3/4
AY McDonald
3/4" Swivel x MIP Coupling
Locke Part #: M4539 MFG Part #: 74624 3/4
AY McDonald
Product Image Not Available 3/4" Washer for F0779 & F0776
Locke Part #: F1776 MFG Part #: P-450T04G
Matco-Norca
3/4" x 1" Mac Pak x MIP
Locke Part #: M4518 MFG Part #: 74753-22 3/4 X 1
AY McDonald
3/4" x 1/2" Coupler
Locke Part #: R1802 MFG Part #: PEI202820
John Guest
3/4" x 1/2" x 1/2" Pex Tee
Locke Part #: R1614 MFG Part #: 06824
Tees, with 3 Flair-It connections. Flair-It Fittings
3/4" x 3/4" x 1/2" CTS
Locke Part #: R1832 MFG Part #: PEI3028A
John Guest
3/4" x 3/4" x 1/2" Pex Tee
Locke Part #: R1616 MFG Part #: 06826
Tees, with 3 Flair-It connections. Flair-It Fittings
3/4" x 3/4" x 3/4" Pex Tee
Locke Part #: R1612 MFG Part #: 06827
Tees, with 3 Flair-It connections. Flair-It Fittings
3/8 OD Fine Thread Flare Caps
Locke Part #: H0636 MFG Part #: FC-6
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613059037
BrassCraft 26613004808
BrassCraft 26613006772
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613136615
BrassCraft 26613004778
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613135526
3/8 OD x 3/8 MIP Compression Male Elbows
Locke Part #: H0634 MFG Part #: 69-6-6X
BrassCraft 26613136325
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613136646
3/8 x 3/8 x 3/8 Angle Stop Valve
Locke Part #: H1053 MFG Part #: ASVPP2LF
John Guest
3/8" Flair-It Pex Coupling
Locke Part #: R1625 MFG Part #: 06855
Couplings with Flair-It conn on both ends. Flair-It Fittings
Used to convert the flare outlet of a water stop to a compression connection, May also be used with instrumentation, hydraulic, and pneumatic systems., Designed for use with aluminum, copper, and plastic tubing. Not intended for use with steel tubing. GENE RICH
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
3/8" OD Tube x 1/2" F.I.P Reducing Elbow
Locke Part #: H0661 MFG Part #: 70-6-8 X
BrassCraft 026613148809
3/8" OD x 1/4" FFL Brass Speedfit
Locke Part #: H0969 MFG Part #: MI4512F4SLF
John Guest
3/8" OD x 3/8" FFL Brass Speedfit
Locke Part #: H0967 MFG Part #: MI4512F6SLF
John Guest
3/8" Oetiker clamp
Locke Part #: R1750 MFG Part #: 41117
Flair-It Fittings
3/8" Pex Flair-It Straight Stop Valve
Locke Part #: R1685 MFG Part #: 06879
An in-line valve with Flair-It connections on both ends. Flair-It Fittings
A faucet connection to a Flair-It connection. Flair-It Fittings
3/8" Speedfit 2-Way Divider
Locke Part #: H1020 MFG Part #: PI2312S
John Guest
3/8" Speedfit 4-Way Cross
Locke Part #: H1030 MFG Part #: PI4712S
John Guest
Product Image Not Available 3/8" Speedfit Check Valve
Locke Part #: H1040 MFG Part #: 3/8 SCV
John Guest
3/8" Speedfit End Stop Cap
Locke Part #: H0961 MFG Part #: PI4612S
John Guest
3/8" Speedfit Locking Clip
Locke Part #: H1056 MFG Part #: PIC1812R
John Guest
3/8" Speedfit Male x 1/2" NPFT
Locke Part #: H0904 MFG Part #: PP011224W
John Guest
3/8" Speedfit Male x 1/4" NPFT
Locke Part #: H0902 MFG Part #: PP011222W
John Guest
3/8" Speedfit Male x 3/8" NPFT
Locke Part #: H0903 MFG Part #: PP011223W
John Guest
3/8" Speedfit Plug
Locke Part #: H0964 MFG Part #: PP0812W
John Guest
3/8" Speedfit Straight Valve
Locke Part #: H1051 MFG Part #: PPSV041212W
John Guest
3/8" Speedfit Union Connect.
Locke Part #: H0971 MFG Part #: PP0412W
John Guest
3/8" Speedfit Union Elbow
Locke Part #: H0931 MFG Part #: PP0312W
John Guest
3/8" Speedfit Union Tee
Locke Part #: H0911 MFG Part #: PP0212
John Guest
3/8" Speedfit x 1/2" Faucet Shank Connector
Locke Part #: H1011 MFG Part #: CI321214S
John Guest
3/8" Speedfit x 3/8" NPFT Elbow
Locke Part #: H0954 MFG Part #: PP481223W
John Guest
3/8" Stem O.D. x 1/4" O.D.
Locke Part #: H0990 MFG Part #: PP061208W
John Guest
3/8" Stem O.D. x 1/4" Tube O.D.
Locke Part #: H0991 MFG Part #: PP221208W
John Guest
3/8" Stem O.D. x 3/8" Tube O.D.
Locke Part #: H0989 MFG Part #: PI221212S
John Guest
Product Image Not Available 3/8" Washer for F0777 & F0774
Locke Part #: F1774 MFG Part #: P-450T02G
Matco-Norca
3/8" x 1/4" Reducing Elbow
Locke Part #: H0940 MFG Part #: PP211208W
John Guest
3/8" x 1/4" Reducing Union
Locke Part #: H0980 MFG Part #: PP201208W
John Guest
3/8" x 3/8" x 1/4" Reducing Tee
Locke Part #: H0920 MFG Part #: PP30121208W
John Guest
3/8" x 3/8" x 3/8" Pex Tee
Locke Part #: R1610 MFG Part #: 06831
Tees, with 3 Flair-It connections. Flair-It Fittings
3/8" x 5/16" Reducing Union
Locke Part #: H0981 MFG Part #: PI201210S
John Guest
3/8" x 7/16" UNS Faucet Conn.
Locke Part #: H1014 MFG Part #: PP3212U7W
Convert Compression to the Push on Fittings John Guest
3/8-in Compression Sleeves
Locke Part #: H0576 MFG Part #: 60-6
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. BrassCraft 26613005942
3/8-in Flare Nut
Locke Part #: H0507 MFG Part #: 141S-6
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. BrassCraft 26613005737
3/8-in OD Flare Cap
Locke Part #: H0491 MFG Part #: 40-6
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines, Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613004921
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005232
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005393
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005379
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005249
3/8-in OD Flare x 3/4-in MIP Adaptor
Locke Part #: H0534 MFG Part #: 48-6-12
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005409
3/8-in OD Flare x 3/8-in MIP Adaptor
Locke Part #: H0532 MFG Part #: 48-6-6
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005386
Recommended for higher pressures than those covered by compression fittings,Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005522
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005034
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005133
3/8-in OD Short Flare Nut
Locke Part #: H0501 MFG Part #: 41S-6X
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613058900
3/8-in OD Tube Compression Union
Locke Part #: H0621 MFG Part #: 62-6X
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613136899
3/8-in OD Tube Nut
Locke Part #: H0571 MFG Part #: 61-6
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613006079
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613135427
Product Image Not Available 3x4x4 DOWNSPOUT ADPTR SDR-35
Locke Part #: R0249 MFG Part #: P1906
STAN ROBERTS
Product Image Not Available 4 CROSS SDR-35 S/W
Locke Part #: R0198 MFG Part #: P179
STAN ROBERTS
Product Image Not Available 4 FEMALE ADAPTER SDR-35
Locke Part #: R0235 MFG Part #: P1404
STAN ROBERTS
Product Image Not Available 4 FITTING CLEANOUT SDR-35
Locke Part #: R0196 MFG Part #: P1504
Less Plug STAN ROBERTS
Product Image Not Available 4" 1/16 BEND SDR-35 S/W
Locke Part #: R0213 MFG Part #: P1704
22-1/2 (1/16) bend STAN ROBERTS
Product Image Not Available 4" 1/4 BEND LONG SDR-35 S/W
Locke Part #: R0202 MFG Part #: P256
STAN ROBERTS
Product Image Not Available 4" 1/8 BEND SDR-35 S/W
Locke Part #: R0201 MFG Part #: P504
45 (1/8) bend STAN ROBERTS
Product Image Not Available 4" 2-WAY CLEANOUT SDR-35 SW
Locke Part #: R0205 MFG Part #: P1004
STAN ROBERTS
4" 90° DWV Street Elbow
Locke Part #: R0898 MFG Part #: 05883
Mueller
Product Image Not Available 4" CAP SDR-35 S/W
Locke Part #: R0197 MFG Part #: P1604
STAN ROBERTS
Product Image Not Available 4" COUPLING SDR-35 S/W
Locke Part #: R0200 MFG Part #: P604
STAN ROBERTS
Product Image Not Available 4" DRAIN GRATE SDR-35
Locke Part #: R0640 MFG Part #: P911
STAN ROBERTS
4" on 10" Gasketed Saddle Tee
Locke Part #: R0806 MFG Part #: L2110-4
Gasketed inlet, gasketed skirt. Includes 2 stainless steel clamps STAN ROBERTS
4" on 6" Gasketed Saddle Tee
Locke Part #: R0804 MFG Part #: L2106-4
Gasketed inlet, gasketed skirt. Includes 2 stainless steel clamps STAN ROBERTS
4" on 8" Gasketed Saddle Tee
Locke Part #: R0805 MFG Part #: L2108-4
Gasketed inlet, gasketed skirt. Includes 2 stainless steel clamps STAN ROBERTS
4" on 8" Saddle Wye
Locke Part #: R0821 MFG Part #: P2308-4
Solvent weld, with clamps STAN ROBERTS
4" On 8" Solvent Weld Saddle Tee
Locke Part #: R0820 MFG Part #: P2108-4
With 2 stainless steel clamps STAN ROBERTS
4" On 8" Tee With Locating Ring
Locke Part #: R0819 MFG Part #: P4108-04
With locating ring STAN ROBERTS
Dallas Specialty Manufacturing
Product Image Not Available 4" SAN TEE SDR-35 S/W
Locke Part #: R0204 MFG Part #: P156
STAN ROBERTS
Product Image Not Available 4" SDR X 4" DWV BUSHING
Locke Part #: R0194 MFG Part #: P1208
4" S&D x 4" PVC DWV. Connects PVC sewer spigot to DWV hub. STAN ROBERTS
Product Image Not Available 4" STREET 1/8 BEND SDR-35 S/W
Locke Part #: R0219 MFG Part #: P404
STAN ROBERTS
Predco Industrial
Product Image Not Available 4" TEE SDR-35 S/W
Locke Part #: R0829 MFG Part #: P104
STAN ROBERTS
Product Image Not Available 4" THREADED PLUG SDR-35
Locke Part #: R0195 MFG Part #: P1154
STAN ROBERTS
Product Image Not Available 4" WYE SDR-35 S/W
Locke Part #: R0203 MFG Part #: P304
STAN ROBERTS
4" x 6" Eccentric Flexible Coupling
Locke Part #: G0489 MFG Part #: 56-E64
NDS Inc
Product Image Not Available 4"ST 1/4 BEND SHORT SDR-35 S/W
Locke Part #: R0207 MFG Part #: P224
STAN ROBERTS
CPVC-CTS female adapter is made of polypropylene, designed for use with CPVC-CTS systems, CPVC will not rust, pit, scale or corrode, CPVC fittings are easy to install and joined by solvent cementing or threading, Certifications:, ASTM, ASTM D, NSF U.P, Certified, NSF/ANSI, Warranty:, 5-year limited warranty NIBCO 039923107206
CPVC-CTS female adapter is made of polypropylene, designed for use with CPVC-CTS systems, CPVC will not rust, pit, scale or corrode, CPVC fittings are easy to install and joined by solvent cementing or threading, Certifications:, ASTM, ASTM D, NSF U.P, Certified, NSF/ANSI, Warranty:, 5-year limited warranty NIBCO 039923107220
Made of polypropylene, designed for use with CPVC-CTS systems, Conveniently snaps on to hang and support CPVC-CTS piping, CPVC will not rust, pit, scale or corrode, CPVC fittings are easy to install and joined by solvent cementing or threading, Certifications:, ASTM, ASTM D, NSF U.P. Certified, NSF/ANSI, Warranty:, 5-year limited warranty NIBCO 039923108401
Product Image Not Available 4x3 RED COUPLING SDR-35 S/W
Locke Part #: R0199 MFG Part #: P654
STAN ROBERTS
5 lb. Anode
Locke Part #: F0905 MFG Part #: KH1-5 5#H1
For grounding wrapped steel gas lines., Use with clamps below. Check local code for weight of Anode to be used. MESA PRODUCTS
5/16" Speedfit Union Connect.
Locke Part #: H0973 MFG Part #: PM0408S
John Guest
5/8 OD Compression Tee
Locke Part #: H0633 MFG Part #: 64-10X
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613135311
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
5/8" Speedfit x 1/2" NPFT Elbow
Locke Part #: H0955 MFG Part #: PI482024S
John Guest
5/8-in Compression Sleeves
Locke Part #: H0578 MFG Part #: 60-10
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing. BrassCraft 26613005973
5/8-in Flare Nut
Locke Part #: H0509 MFG Part #: 141S-10
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. BrassCraft 26613005751
5/8-in OD Flare Cap
Locke Part #: H0493 MFG Part #: 40-10
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines, Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613004945
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005300
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005461
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005317
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005478
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005058
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005157
5/8-in OD Short Flare Nut
Locke Part #: H0503 MFG Part #: 41S-10
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005003
5/8-in OD Tube Compression Union
Locke Part #: H0623 MFG Part #: 62-10X
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613136783
Product Image Not Available 6 FITTING CLEANOUT SDR-35
Locke Part #: R0227 MFG Part #: P1506
Less Plug STAN ROBERTS
Product Image Not Available 6" 1/4 BEND LONG SDR-35 S/W
Locke Part #: R0209 MFG Part #: P257
STAN ROBERTS
Product Image Not Available 6" 1/8 BEND SDR-35 S/W
Locke Part #: R0212 MFG Part #: P506
45 (1/8) bend STAN ROBERTS
Product Image Not Available 6" CAP SDR-35 S/W
Locke Part #: R0229 MFG Part #: P1606
STAN ROBERTS
Product Image Not Available 6" COUPLING SDR-35 S/W
Locke Part #: R0193 MFG Part #: P606
STAN ROBERTS
6" On 8" Solvent Weld Saddle Tee
Locke Part #: R0831 MFG Part #: P2108-6
With 2 stainless steel clamps STAN ROBERTS
Product Image Not Available 6" SAN TEE SDR-35 S/W
Locke Part #: R0830 MFG Part #: P-157
STAN ROBERTS
Product Image Not Available 6" TEE SDR-35 S/W
Locke Part #: R0211 MFG Part #: P106
STAN ROBERTS
6" Test Caps for SDR35& Sch40
Locke Part #: R0833 MFG Part #: 4841
For testing or capping for clean-outs. Pasco Specialty & Manufacturing
Product Image Not Available 6" THREADED PLUG SDR-35
Locke Part #: R0228 MFG Part #: P1156
STAN ROBERTS
Product Image Not Available 6" WYE SDR-35 S/W
Locke Part #: R0208 MFG Part #: P306
45 High PVC STAN ROBERTS
6" x 1" AWWA Double Strap Saddle
Locke Part #: M4551 MFG Part #: 73825 6X1
AY McDonald
6" x 3/4" AWWA Double Strap Saddle
Locke Part #: M4550 MFG Part #: 73825 6X3/4
AY McDonald
Product Image Not Available 6X4 BUSHING SWR X SWR SDR-35
Locke Part #: R0210 MFG Part #: P1216
STAN ROBERTS
Product Image Not Available 6X6 SEWER X DWV SDR-35
Locke Part #: R1042 MFG Part #: P659
3" DWV. 4" S&D Pipe Adapter. STAN ROBERTS
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements., For use with instrumentation, hydraulic and pneumatic systems. Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613148144
7/8" OD Flare x 3/4" F.I.P Adapter
Locke Part #: H0524 MFG Part #: 46-14-12 X
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
7/8-in OD Flare x 3/4-in MIP Adaptor
Locke Part #: H0546 MFG Part #: 48-14-12
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft 26613005485
7/8-in OD Tube Compression Union
Locke Part #: H0626 MFG Part #: 62-14X
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613136806
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation. Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft 26613135366
GPK PRODUCTS
Large wrench flats provided for proper installation, Insert stiffeners required on all flexible plastic connections, Service fittings are rated to withstand the same pressures as the tubing they are designed to fit, Designed and tested for cold potable water only, EPDM rubber gaskets are used in compression fittings, Manufactured in compliance with ANSI/AWWA C800 (latest revision), Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latest revision), and identified with "NL", Certified to NSF/ANSI 61 and NSF/ANSI 372, Brass components not in contact with potable water conform to ASTM B62 and ASTM B584,, UNS C83600 -85-5-5-5 (latest revision) AY McDonald
Large wrench flats provided for proper installation, Insert stiffeners required on all flexible plastic connections, Service fittings are rated to withstand the same pressures as the tubing they are designed to fit, Designed and tested for cold potable water only, EPDM rubber gaskets are used in compression fittings, Manufactured in compliance with ANSI/AWWA C800 (latest revision), Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latest revision), and identified with "NL", Certified to NSF/ANSI 61 and NSF/ANSI 372, Brass components not in contact with potable water conform to ASTM B62 and ASTM B584,, UNS C83600 -85-5-5-5 (latest revision) AY McDonald
PVC roof drain with cast iron dome IPS Corporation 12181861059
Fits over 3" & inside 4" schedule 40 pipe & 6" diameter access cover, PVC. 3" IPS tailpiece adjusts to desired finish level. IPS Corporation 767580026751
AB&A Nickel Bronze Drain Strainer
Locke Part #: R1196 MFG Part #: 69208
IPS Corporation 767580029448
Flair-It Fittings
Pressure Rating: 150, Temperature Rating: 73, Application: Cold Water Applications on Galvanized or Plastic Pipe With pipe thread outlet B&K
B&K
B&K 510-702 3/8 inch Galvanized Union
Locke Part #: F0157 MFG Part #: 510-702
B&K
B&K 510-703 1/2 inch Galvanized Union
Locke Part #: F0158 MFG Part #: 510-703
B&K
B&K 510-704 3/4 inch Galvanized Union
Locke Part #: F0159 MFG Part #: 510-704
B&K
B&K 510-705 1-inch Galvanized Union
Locke Part #: F0160 MFG Part #: 510-705
B&K
Viega 691514412436
CMP TO CMP STR NDL VAL 1/4 OD
Locke Part #: H0654 MFG Part #: NV105-4X
Positive sealing & flow adjustment up to the capacity of the valve, Metal-to-metal seats with a fine thread engagement, Compliant needle valve options available for, California and Vermont low-lead requirements, Use with automotive & industrial applications for instrumentation, hydraulic and pneumatic systems., Not intended for use with natural gas, LPG (liquefied petroleum gas or propane), nuclear or avionic (aircraft) applications, 115 F maximum continuous use temperature BrassCraft 26613137490
CMP TO CMP STR NDL VAL 3/8 OD
Locke Part #: H0655 MFG Part #: NV105-6X
Positive sealing & flow adjustment up to the capacity of the valve, Metal-to-metal seats with a fine thread engagement, Compliant needle valve options available for, California and Vermont low-lead requirements, Use with automotive & industrial applications for instrumentation, hydraulic and pneumatic systems., Not intended for use with natural gas, LPG (liquefied petroleum gas or propane), nuclear or avionic (aircraft) applications, 115 F maximum continuous use temperature BrassCraft 26613137483
Compression Cap 3/8" OD Tube
Locke Part #: H0579 MFG Part #: 61CP-6 X
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Compression Cap 5/8" OD Tube
Locke Part #: H0580 MFG Part #: 61CP-10
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Compression Nut 1/2" OD Tube
Locke Part #: H0572 MFG Part #: 61-8
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Compression Nut 5/8" OD Tube
Locke Part #: H0573 MFG Part #: 61-10
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems., Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, Available in a broad range of sizes, Compliant fitting options available for California and Vermont low-lead requirements, For use with instrumentation, hydraulic and pneumatic systems.Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing BrassCraft
Drop Ear90 Elbow, Slip, 1/2 Inch
Locke Part #: R0723 MFG Part #: 4724 3/4
Made of polypropylene, designed for use with CPVC-CTS systems, Conveniently snaps on to hang and support CPVC-CTS piping, CPVC will not rust, pit, scale or corrode, CPVC fittings are easy to install and joined by solvent cementing or threading, Certifications:, ASTM, ASTM D, NSF U.P. Certified, NSF/ANSI, Warranty:, 5-year limited warranty NIBCO 25528787370
Predco Industrial
BrassCraft
BrassCraft 026613004761
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines. Designed for use with aluminum, copper, brass and welded steel tubing that can be flared BrassCraft
FL F UN BR 5/8 OD TB X 1/2
Locke Part #: H0659 MFG Part #: MAU1-10-8S
BrassCraft 26613088570
FL M UN BR 5/8 OD TB X 1/2
Locke Part #: H0658 MFG Part #: MAU2-10-8S
BrassCraft 26613082684
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. BrassCraft
Recommended for higher pressures than those covered by compression fittings, Resist mechanical pull out, Available in a broad range of sizes, For use with fuel, oil, liquefied petroleum (LP) and natural gas lines., Designed for use with aluminum, copper, brass and welded steel tubing that can be flared. BrassCraft
Flexible Coupling
Locke Part #: G0488 MFG Part #: 56-E43
NDS Inc 52063049564
Flexible sewer couplings that connect similar and dissimilar pipe materials and sizes., Flexibility, Sleeve is manufactured of molded natural and synthetic rubber, Leak proof Seal -, Inside surfaces of transitional size couplings are stepped to conform better to different pipe sizes, Tight Fitting -, 300 Series Stainless Steel worm drive clamps hold pipe ends securely, Corrosion Resistant -, Stainless steel clams are highly effective in many environments, Versatile -, Rubber blend permits a high degree of distortion without change in basic physical or chemical resistance NDS Inc 52063048390
Flexible Saddle Tees with Clamps, 4"
Locke Part #: G0451 MFG Part #: 4T/C
One saddle fits pipe 4" to 12" diameters. Has stainless steel clamps. NDS Inc 52063048970
Flexible Saddle Tees with Clamps, 6"
Locke Part #: G0452 MFG Part #: 6T/C
One saddle fits pipe 4" to 12" diameters. Has stainless steel clamps. NDS Inc 52063049700
Flo-Lock Female Adapter, 1" FPT x 1" TS
Locke Part #: R3659 MFG Part #: 731-10
NDS Inc 670686731101
NDS Inc 670686731712
NDS Inc 670686731071
Flo-Lock Male Adapter, 1" MPT x 1" TS
Locke Part #: R3652 MFG Part #: 730-10
NDS Inc 670686730104
Flo-Lock Male Adapter, 3/4" MPT x 1" TS
Locke Part #: R3651 MFG Part #: 730-71
NDS Inc 670686730715
NDS Inc 670686730074
Gravity Backwater Valve 3" PVC
Locke Part #: R0970 MFG Part #: 375P
NDS Inc 52063333755
NDS Inc 52063343754
Gravity Backwater Valve 4" PVC
Locke Part #: R0971 MFG Part #: 475P
NDS Inc 52063447537
NDS Inc 52063447544
Gravity Backwater Valve 6" PVC
Locke Part #: R1974 MFG Part #: 675P
NDS Inc 52063666754
Hose Grip Washer Connector
Locke Part #: G0250 MFG Part #: 5930
Now you can securely connect any washing machine drain hose to standard laundry stand pipe drains. Pasco Specialty & Manufacturing
Suitable for Irrigation, Swimming Pool, and other water applications., Thermoplastic design eliminates process and atmospheric corrosion., Pressure rated up to 150 psi, non-shock water at 73 F., Socket & Thread dimensions meet ASTM requirements D- 2467, D-2464. Bi-directional: can be installed in either direction., Individually Bar-coded. LASCO Fittings
Separates copper pipe from steel pipe to prevent electrolysis. Recommended for use when water flows from copper pipe into galvanized pipe. Piping lasts longer. Legend Valve
BrassCraft
Murray Stainless Steel PEX Clamp 1"
Locke Part #: R1765 MFG Part #: 46120
Flair-It Fittings
NEV2-C1 CMP TO MIP ANG NDL
Locke Part #: H0643 MFG Part #: NV104-4-2
Positive sealing & flow adjustment up to the capacity of the valve, Metal-to-metal seats with a fine thread engagement, For use with automotive & industrial applications for instrumentation, hydraulic and pneumatic systems., Not intended for use with natural gas, LPG (liquefied petroleum gas or propane), nuclear or avionic (aircraft) applications BrassCraft 26613078465
Large wrench flats provided for proper installation, Insert stiffeners required on all flexible plastic connections, Service fittings are rated to withstand the same pressures as the tubing they are designed to fit, Designed and tested for cold potable water only, EPDM rubber gaskets are used in compression fittings, Manufactured in compliance with ANSI/AWWA C800 (latest revision), Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latest revision), and identified with "NL", Certified to NSF/ANSI 61 and NSF/ANSI 372, Brass components not in contact with potable water conform to ASTM B62 and ASTM B584,, UNS C83600 -85-5-5-5 (latest revision) AY McDonald
Large wrench flats provided for proper installation, Insert stiffeners required on all flexible plastic connections, Service fittings are rated to withstand the same pressures as the tubing they are designed to fit, Designed and tested for cold potable water only, EPDM rubber gaskets are used in compression fittings, Manufactured in compliance with ANSI/AWWA C800 (latest revision), Brass components in contact with potable water conform to ASTM B584, UNS C89833 (latest revision), and identified with "NL", Certified to NSF/ANSI 61 and NSF/ANSI 372, Brass components not in contact with potable water conform to ASTM B62 and ASTM B584,, UNS C83600 -85-5-5-5 (latest revision) AY McDonald
NP11 1/2" x 1/2" x 3/8" PEX DZR Brass Insert Tee
Locke Part #: R1475 MFG Part #: LF6246008080600
JMF Company 039923322968
NP18P 1" Poly Pex Test Plug
Locke Part #: R1387 MFG Part #: 039923321350
Made of PPSU (polyphenylsulfone), Lightweight, easy to install and maintenance-free, Requires fewer fittings than traditional rigid plumbing systems, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321350
NP18P 1/2" Poly Pex Test Plug
Locke Part #: R1383 MFG Part #: 039923368423
Made of PPSU (polyphenylsulfone), Lightweight, easy to install and maintenance-free, Requires fewer fittings than traditional rigid plumbing systems, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923232649
NP18P 3/4" Poly Pex Test Plug
Locke Part #: R1385 MFG Part #: 039923321343
Made of PPSU (polyphenylsulfone), Lightweight, easy to install and maintenance-free, Requires fewer fittings than traditional rigid plumbing systems, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321343
NP18P 3/8" Poly Pex Test Plug
Locke Part #: R1381 MFG Part #: 039923335302
Made of PPSU (polyphenylsulfone), Lightweight, easy to install and maintenance-free, Requires fewer fittings than traditional rigid plumbing systems, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923335302
NP28-LF 3/4" PEX x 3/4" FIP Drop Ear Elbow
Locke Part #: R1465 MFG Part #: LF6225912129900
Made of lead-free silicon bronze alloy, PEX x female iron pipe connection and wings with holes, Lightweight, easy to install and maintenance-free, Maximum service temperature 200 F, Lead-free, Dezincification resistant, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F, 1807, CSA B137.5, Warranty, Nibco inc. Limited warranty JMF Company 039923326218
NP29 1" PEX x PB Transition Fitting
Locke Part #: R1404 MFG Part #: LF6217916169800
JMF Company 039923267214
NP50 1 Stainless Steel PEX Sleeve
Locke Part #: R2533 MFG Part #: 039923234858
Maximum service temperature 200 F, Third party certified to NSF-pw, Complies with ASTM F877, Size range 1/2" to 1" NIBCO
NP50 1/2" Stainless Steel PEX Sleeve
Locke Part #: R2531 MFG Part #: 039923007766
Maximum service temperature 200 F, Third party certified to NSF-pw, Complies with ASTM F877, Size range 1/2" to 1" NIBCO 039923007766
NP50 3/4" Stainless Steel PEX Sleeve
Locke Part #: R2532 MFG Part #: 039923234841
Maximum service temperature 200 F, Third party certified to NSF-pw, Complies with ASTM F877, Size range 1/2" to 1" NIBCO 039923234841
NPD01 1" Poly Insert Coupling
Locke Part #: R2427 MFG Part #: 039923320995
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923320995
NPD01 1/2" Poly Insert Coupling
Locke Part #: R2419 MFG Part #: 039923320933
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923320933
NPD01 3/4" Poly Insert Coupling
Locke Part #: R2423 MFG Part #: 039923320971
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923320971
NPD01R 1" x 3/4" Poly Insert Coupling
Locke Part #: R2425 MFG Part #: 039923320988
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923320988
NPD01R 3/4" x 1/2" Poly Insert Coupling
Locke Part #: R2421 MFG Part #: 039923320957
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923320957
NPD07 1" Poly Insert Elbow
Locke Part #: R2507 MFG Part #: 039923321053
Made of PPSU polyphenylsulfone, PEX end connections and a 90 bend to change direction, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321053
NPD07 1/2" Poly Insert Elbow
Locke Part #: R2501 MFG Part #: 039923321008
Made of PPSU polyphenylsulfone, PEX end connections and a 90 bend to change direction, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321008
NPD07 3/4" Poly Insert Elbow
Locke Part #: R2505 MFG Part #: 039923321039/PX00608G
Made of PPSU polyphenylsulfone, PEX end connections and a 90 bend to change direction, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321039
NPD07R 3/4" x 1/2" Poly Insert Elbow
Locke Part #: R2502 MFG Part #: 039923321015
Made of PPSU polyphenylsulfone, PEX end connections and a 90 bend to change direction, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321015
NPD11 1" Poly Insert Tee
Locke Part #: R2497 MFG Part #: 039923321237
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321237
NPD11 1/2" Poly Insert Tee
Locke Part #: R2477 MFG Part #: 039923321077
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321077
NPD11 3/4" Poly Insert Tee
Locke Part #: R2487 MFG Part #: 039923321152
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321152
NPD11R 1" x 1" x 1/2" Poly Insert Tee
Locke Part #: R2493 MFG Part #: 039923321213
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321213
NPD11R 1" x 1" x 3/4" Poly Insert Tee
Locke Part #: R2495 MFG Part #: 039923321220
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321220
NPD11R 1/2" x 1/2" x 3/4" Poly Insert Tee
Locke Part #: R2479 MFG Part #: 039923321091
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321091
NPD11R 3/4" x 1/2" x 1/2" Poly Insert Tee
Locke Part #: R2481 MFG Part #: 039923321114
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321114
NPD11R 3/4" x 1/2" x 3/4" Poly Insert Tee
Locke Part #: R2483 MFG Part #: 039923321121
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321121
NPD11R 3/4" x 3/4" x 1" Poly Insert Tee
Locke Part #: R2488 MFG Part #: 039923336347
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923336347
NPD11R 3/4" x 3/4" x 1/2" Poly Insert Tee
Locke Part #: R2485 MFG Part #: 039923321138
Made of PPSU polyphenylsulfone, PEX end connections, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321138
NIBCO
NIBCO
NPD22 1" x 1" MIP Poly Adapter
Locke Part #: R2444 MFG Part #: 039923336354
Made of PPSU polyphenylsulfone, PEX x male iron pipe connection, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923336354
NPD22 1/2" PEX x 1/2" MIP Poly Adapter
Locke Part #: R2440 MFG Part #: 039923321244
Made of PPSU polyphenylsulfone, PEX x male iron pipe connection, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321244
NPD22 1/2" x 3/4" MIP Poly Adapter
Locke Part #: R2441 MFG Part #: 039923336361
Made of PPSU polyphenylsulfone, PEX x male iron pipe connection, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923336361
NPD22 3/4" PEX x 3/4" MIP Poly Adapter
Locke Part #: R2443 MFG Part #: 039923321251
Made of PPSU polyphenylsulfone, PEX x male iron pipe connection, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321251
NPD22 3/4" x 1/2" MIP Poly Adapter
Locke Part #: R2442 MFG Part #: 039923336378
Made of PPSU polyphenylsulfone, PEX x male iron pipe connection, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923336378
NPD25BE 1/2" x 1/2" MIP Poly Adapter Elbow
Locke Part #: R2447 MFG Part #: 039923336392
NIBCO 039923336392
NPD25BE 1/2" x 3/8" MIP Poly Adapter Elbow
Locke Part #: R2445 MFG Part #: 039923335197
NIBCO 039923335197
NPD26 1/2" PEX x 1/2" NPSM Poly Swivel Adapter
Locke Part #: R2508 MFG Part #: 039923321312
Made of PPSU polyphenylsulfone, PEX x straight pipe thread end connection, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321312
NPD26E 1/2" PEX x 1/2" NPSM Poly Swivel Elbow
Locke Part #: R2512 MFG Part #: 039923321374
Made of PPSU polyphenylsulfone, PEX x straight pipe thread end connection and 90-degree bend to change direction, Lightweight, easy to install and maintenance-free, Joining can be accomplished with Nibco copper crimp ring, copper sleeves, stainless steel sleeves, or stainless steel clamps, Maximum service temperature 200 F, Certifications:, Third party certified to NSF-pw, Complies with ASTM F877, Complies with ASTM F2159, CSA B137.5, Warranty, Nibco inc. Limited warranty NIBCO 039923321374
PEX Black Crimp Ring NP19, Size 1"
Locke Part #: R1415 MFG Part #: 039923267344
NIBCO 039923267344
PEX Black Crimp Ring NP19, Size 1/2"
Locke Part #: R1411 MFG Part #: 039923267320
NIBCO 039923267320
PEX Black Crimp Ring NP19, Size 3/4"
Locke Part #: R1413 MFG Part #: 039923267337
NIBCO 039923267337
Viega 691514503035
Press connection, female pipe thread, Fast and easy to use, Flameless, Permanent connections, Less equipment required, Large selection of fittings from 1/2" to 4", Consistent professional appearance,, Environmentally friendly connection system, Versatility of fittings and tools for variety of applications, Components:, EPDM sealing elements, Applications:, Potable water, Chilled water, Non-medical gases (140 PSI maximum), Fire sprinkler (175 PSI maximum), Hydronic heating (with Glycol),, Approved for installations in both above-and below-ground applications, Compressed air (200 PSI max.), Listings and Certificates:, NSF 61G, IAPMO PS117,, UL 213, FM Class 1920, ICC-ES PMG 1037m,, CSA MSE-13, ABS Kessler Industries 691514791906
Press connection, female pipe thread, Fast and easy to use, Flameless, Permanent connections, Less equipment required, Large selection of fittings from 1/2" to 4", Consistent professional appearance,, Environmentally friendly connection system, Versatility of fittings and tools for variety of applications, Components:, EPDM sealing elements, Applications:, Potable water, Chilled water, Non-medical gases (140 PSI maximum), Fire sprinkler (175 PSI maximum), Hydronic heating (with Glycol),, Approved for installations in both above-and below-ground applications, Compressed air (200 PSI max.), Listings and Certificates:, NSF 61G, IAPMO PS117,, UL 213, FM Class 1920, ICC-ES PMG 1037m,, CSA MSE-13, ABS Kessler Industries 691514791951