Loading ...

Loading ...

Search in: Parts Category

Material: Plastic, Color/Finish: Chrome Plated Universal Chrome Plated Left Hand Plastic Trip Lever, Special ABS arm can be shaped to fit a variety of toilet tank trim configurations, Front Mount, Includes locknut
E0022.jpg#1- Bubbler Assembly With Lock Nut
Locke Part #: E0022MFG Part #: 92715C Compare
Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong, abrasion-resistant, anti-sweat. Keyed in location to prevent rotation.
M1022.jpg#7 - 1" Dual Check Backflow Preventer
Locke Part #: M1023MFG Part #: 0072205 Compare
M1022.jpg#7 - 3/4" Dual Check Backflow Preventer
Locke Part #: M1022MFG Part #: 0072204 Compare
E0021.jpg(#4) Regulator Cartridge
Locke Part #: E0021MFG Part #: 61313C Compare
E0021.jpg(#4A) Regulator Cart. For E0005 & E0012
Locke Part #: E0031MFG Part #: 61314C Compare
E0021.jpg(#6) Regulator Holder
Locke Part #: E0023MFG Part #: 92450C Compare
Product Image Not Available0 Flat Bibb Washers 100 Pack
Locke Part #: M1618MFG Part #: W231A Compare
Size: 0.57” ID X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 18” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 24” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 24” connector with 3/4” M.I.P x 7/8” OD Compression end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braining, significantly increasing the flexibility of the connector, No kinking, No crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Won t work harden even with repeated bending, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, 100% compliant to California and Vermont low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply., Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Product Image Not Available00 Beveled Faucet 100 Pack
Locke Part #: M1610MFG Part #: W230 Compare
Product Image Not Available00 Flat Bibb 100 pack
Locke Part #: M1617MFG Part #: W230A Compare
E0599.jpg1" 150lb. 3" Long Shank Relief Valve
Locke Part #: E0599MFG Part #: FVMX-3LS 150# Compare
1" 150lb. Long shank. AGA certified 500,000 btu/hr, ASME rated 2,155,000 btu/hr@150lb. For commercial hot water storage tanks.
M0931.jpg1" C x C Brass Ball Valve
Locke Part #: M0933MFG Part #: 94ALF20501A Compare
M15.jpg1" Chrome Plated Escutcheon
Locke Part #: M0018MFG Part #: 163 Compare
M4565.jpg1" Coupling CTS x MIP
Locke Part #: M4566MFG Part #: 74130-103 Compare
M4531.jpg1" CTS Meter Setter
Locke Part #: M4567MFG Part #: 721-410WXTT 44 1" Compare
T Comp. or 3T Comp. - bottom inlet/outlet, Angle Ball Valve - top inlet, Meter Nut top outlet
M1010.jpg1" Double Check
Locke Part #: M1011MFG Part #: 0063232 Compare
Size: 1", Weight: 3 lbs, Body: Bronze, Maximum Working Pressure: 400psi (27.6 bar), Temperature Range: 33˚F – 180˚F (0.5˚C – 82˚C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM, Valve Disc: Elastomer, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
BLF9101.jpg1" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1164MFG Part #: 77FLF10501 1" Compare
Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
M1517.jpg1" FIP x 1" FIP Check Valve
Locke Part #: M1518MFG Part #: CVNL100 Compare
M1426.jpg1" IP Tee Handle Ball Valve
Locke Part #: M1427MFG Part #: 759T05TSLF Compare
M0925.jpg1" IPS Brass Ball Valve
Locke Part #: M0927MFG Part #: 94ALF10501A Compare
Size: 1", Weight: 4.8 lbs, Body: Lead Free cast copper silicon alloy, Maximum Working Pressure: 150psi (10.3 bar), End Connection: Female NPT, Temperature Range: 33°F – 180°F (0.5°C – 83°C), Springs: Stainless steel, Bonnet: PPO, Vent Disc: EPDM, Disc Holder: PPO, Check Disc: Silicone rubber
Size: 1", Weight: 6.5 lbs, Body: Lead Free copper silicon alloy, Maximum Working Pressure: 300psi (20.7 bar), Temperature Range: 33°F – 160°F (0.5°C – 71°C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM with PTFE wetted surface, Valve Disc: EPDM, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
M4505.jpg1" Leather Washers
Locke Part #: M4506MFG Part #: 4124058 Compare
C0187.jpg1" or larger supply
Locke Part #: C0188MFG Part #: 45-1411 Compare
Genuine renewal parts
M1015.jpg1" Pressure Breaker
Locke Part #: M1016MFG Part #: 0792012 Compare
M1708.jpg1" Pressure Vacuum Breaker Assembly
Locke Part #: M1710MFG Part #: 720A 1" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg1" Reduced Pressure Backflow Preventer
Locke Part #: M1001MFG Part #: 0065373 Compare
M4505.jpg1" Rubber Gaskets / Washers
Locke Part #: M4511MFG Part #: 4124051 Compare
BLF9102.jpg1" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1174MFG Part #: 77FLF20501 1" Compare
Item: M1174, Size (in): 1, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M1700.jpg1" Spill Resistant Pressure Vacuum Breaker Assembly
Locke Part #: M1700MFG Part #: 460 XL 1 INCH SPILL PROO Compare
Maximum working water, Pressure : 150 PSI, Maximum working water, Temperature: 180 F, Hydrostatic test pressure: 300 PSI Threaded connections: ANSI B1.20.1, Replaceable thermoplastic modular cartridge. Spill resistant feature for indoor use.
100RS-100.jpg1" Straight Valve-Rising Swivel-Red Brass
Locke Part #: M1512MFG Part #: 100RS-100Y Compare
E1134.jpg1" Sweat
Locke Part #: E1135MFG Part #: 50614W Compare
Eliminating leak paths in the system, Shortening installation times, Fight the increasing costs of raw materials with step and time saving innovation methods
M0514.jpg1" Swing Check Valve IPS
Locke Part #: M0516MFG Part #: M516 Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
Size: 1", Capacity: 750000 BTU/hr, Temperature: 210°F, Pressure Set Point: 150 psi, Stem: 4-3/4", Thread Type: Female
WaterFlowMeter.jpg1" Water Meter Lead Free
Locke Part #: M4547MFG Part #: WM-100 1" Compare
Dimension: 1", Weight (lbs): 12.2, Flow Rating (gpm): 50, Continuous Flow (gpm): 25, Normal Flow Range (gpm): 3-50, Low Flow (gpm @ > 97%): 3/4, Extended Low Flow (gpm @ > 95%): 1/2, Maximum Working Pressure (psi): 150, Maximum Working Temperature (°F): 105, Specific Displacement (revs/gallon): 15.3/.96, Headloss at Maximum Flow Rate (psi): 7.9, Length (A ): 10.75", Width (B ): 6-13/16", Height Standard Register with lid (C ): 5.75", Height Bottom to Center Line (D): 2 5/8", Packed To Carton: 4, Carton Weight (lbs): 53.8 Hermetically sealed dry dial protected from the elements, won't discolor or fade, Proven multi-jet water meter design, Connections are external non-tapered meter threading (comes with Male NPT thread adapters), Integral strainer in measuring chamber protects measuring components from foreign debris., Tempered glass lens for continued readability., Hinged lens cover to protect lens and register from damage. Magnetic drive to eliminate potential leak point., Easy to read register display with large clear digits., Odometer measures in gallons up to 9,999,999(99,999,999 for WM150/200).
M0546.jpg1" Water Press. Reduc. Valve
Locke Part #: M0548MFG Part #: 0009490 Compare
Set at 45 lb. Reduces water pressure in service lines.
M1692.jpg1" Water Pressure Reducing Valve
Locke Part #: M1694MFG Part #: 70 1" PRV Compare
M1030.jpg1" Wye Strainer Kit with Nipple
Locke Part #: M1032MFG Part #: 0379113 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
C0239.jpg1" x 1-1/8" x 10-1/2"
Locke Part #: C0240MFG Part #: 110 Compare
C0239.jpg1" x 10-1/2"
Locke Part #: C0239MFG Part #: 109 Compare
F0790.jpg1" x 3" I.P. 1 Bolt Style
Locke Part #: F0792MFG Part #: 330-053 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
Product Image Not Available1" x 3/4" Flanged Spud Washer
Locke Part #: M3490MFG Part #: W363 Compare
M4562.jpg1" x 3/4" Tee Connection CTS x CTS x CTS
Locke Part #: M4562MFG Part #: 74760-22 Compare
M0931.jpg1/2" C x C Brass Ball Valve
Locke Part #: M0931MFG Part #: 94ALF20301A Compare
M15.jpg1/2" Chrome Plated Escutcheon
Locke Part #: M0016MFG Part #: M16-2000PCS Compare
Pressure-Temperature, Maximum Temperature: 212 degrees F (100 degrees C), Maximum Working Pressure: 100 psi (6.9 bars), Adjustment, Range, : 10-25 psi (68.7 - 172.4 kPa) set at 15 psi (103.4 kPa)
M0495.jpg1/2" Comp. Stop CxC, 125#
Locke Part #: M0495MFG Part #: M495 Compare
For use with water, oil or air. Brass body.
M663.jpg1/2" Cone Washers
Locke Part #: M0663MFG Part #: W430T THREADED Compare
M0027.jpg1/2" CWT F&C Plate
Locke Part #: M0029MFG Part #: 280 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
Size: 1/2" A necessity where drains are infrequently used. It should be installed a min. of 6" above grid of floor drain or flood level rim of equipment served.
R1634a.jpg1/2" F1807 Dishwasher/Toilet Outlet Box For Crimp Pex
Locke Part #: M1178MFG Part #: 696-G1001XF Compare
Strong installation, mounting on stud, Integral nail holes offer quick installation, Bracket track allows for adjustment between studs, Durable ABS stands up to job site abuse, Flip box for top supply, High-quality quarter-turn ball valve(s), 3/8" O.D. Compression outlet connection(s)
R1634a.jpg1/2" F1960 Dishwasher/Toilet Outlet Box For Wirsbo Pex
Locke Part #: R1634MFG Part #: 696-G1001WF Compare
Strong installation, mounting on stud, Integral nail holes offer quick installation, Bracket track allows for adjustment between studs, Durable ABS stands up to job site abuse, Flip box for top supply, High-quality quarter-turn ball valve(s), 3/8" O.D. Compression outlet connection(s)
BLF9101.jpg1/2" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1162MFG Part #: 77FLF10301 1/2" Compare
Item: M1162, Size (in): 1/2, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
A0335.jpg1/2" FIP/Sweat Ell
Locke Part #: A0335MFG Part #: 56CC Compare
For fiberglass & acrylic showers. Locknuts secure Ell. Female threads for arm & 1/2 male solder fitting for water supply. Brass with 2 locknuts.
E0048.jpg1/2" FIP Anti-Scald
Locke Part #: E0048MFG Part #: 0559116 Compare
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
tempera-pressure-balancing-valve.jpg1/2" FIP Inlet & Discharge
Locke Part #: M0565MFG Part #: TRB-2 Compare
Automatic pressure compensating, preventing thermal shock, Can be used with single or tow handle mixing valve assemblies, Meets A.S.S.E. STANDARD 1066 individual in-line pressure balancing valves, Holds a selected water temperature to within +- 3 F degree regardless of pressure change, Fully ported valve with minimal pressure drop, Safe and positive because it is a pressure balancing valve, not a thermostatic mixing valve, Construction Details:, External:, Red-Bronze cast body containing over 85% ingot copper. ASTM # B584 Alloy# C84400., Internal:, Stainless steel (# 303) is used in the piston and sleeve.
C182.jpg1/2" FIP x 1/2" FIP, Self-Closing Urinal Valve
Locke Part #: C0182MFG Part #: 184-12 Compare
Inlet Size: 1/2" FIP x 1/2" FIP Spring Loaded, Self-Closing Operation., For drinking fountains or other fixtures requiring manual valves., Heavy Casted Brass Body. Tamper resistant cross handle., Slip-stop prevents breakage. Tested for Quality & Dependability.
M675.jpg1/2" Flanged Dishwasher Tailpiece Washer
Locke Part #: M0675MFG Part #: 991-6 Compare
Inlet: 1/2" FNPT, Outlet: 3/8" FNPT It is efficient, dependable, quiet and versatile, It operates equally well at high or low pressures, Automatic metering design and balanced cartridge assembly, The push button operation resists damage and vandalism, The 190 features a casted brass body with triple chrome plating for long lasting finish, Each valve is water tested to assure proper operation once installed
Finish: Chrome Plated, Connection: 1/2" FPT, Qty: 24, Catalog Sequence: 1, Wt: 36 Lbs Heavy cast brass valve body. 3-Way design allows for multiple installation options., Includes one 1/2 brass plug to block off unused opening, Polished brass or chrome plated escutcheon., Shipped with Hearth Key. Available with Stem Extender., Natural Gas BTU Ratings: C-64 Gas Valve: 70,840 BTUH at 7 W.C. Inlet.
M0925.jpg1/2" IPS Brass Ball Valve
Locke Part #: M0925MFG Part #: 94ALF10301A Compare
M0027.jpg1/2" IPS F&C Plate
Locke Part #: M0027MFG Part #: 1237I Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
Size: 1/2", Weight: 4.5 lbs, Maximum Working Pressure: 175psi (12.1 bar)., Temperature Range: 33°F – 180°F (0.5°C – 82°C).
Short 90 Elbow Kit (Sold By The Pair)
E0260.jpg1/2" NPT Union Thermostatic Mixing Valve
Locke Part #: E0260MFG Part #: 34ALF 213T Compare
Dual purpose mixing or diverting valves, Constant water temperature under changing operating conditionsReliable at minimum flow of 0.5 gpm, Nickel-plated brass construction, EPDM O-rings, Straight through design (hot and cold at the same level), Max pressure 150 psi (1034 kPa), Max temperature 212 F (100 C), Tamper resistant design, Valve trapping not required, ASSE, CSA and IAPMO listed
M1730.jpg1/2" PEX Crimp Tee ASTM F 1807
Locke Part #: M1930MFG Part #: 660-GTX2B Compare
ANSI/ ASSE 1010-2004, Factory tested to withstand 500,000 cycles (654-C tested), Allows for installation in 2 4 wall cavity,, Installs at any angle, ASSE 1010 certified as a water hammer arrester that is designed to provide Continuous protection, without aintenance allowing the Hydra-Rester to be installed without access panels
M1168.jpg1/2" PEX F 1807 Lavatory Box
Locke Part #: M1168MFG Part #: 696-G2001XF Compare
ABS boxes mount securely to stud, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High-quality quarter-turn ball valves with 3/8" O.D. compression outlet connections
M1168.jpg1/2" PEX F 1960 Lavatory Box
Locke Part #: R1633MFG Part #: 696-G2001WF Compare
ABS boxes mount securely to stud, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High-quality quarter-turn ball valves with 3/8" O.D. compression outlet connections
B0374.jpg1/2" PEX x 3/8" OD Comp 1/4 Turn Angle Stop
Locke Part #: B0374MFG Part #: 114-609NL Compare
B0374.jpg1/2" PEX x 3/8" OD Comp 1/4 Turn Straight Stop
Locke Part #: B0375MFG Part #: 114-709NL Compare
B0343.jpg1/2" PEX x Dual 3/8" OD Compression
Locke Part #: B0343MFG Part #: 114-406NL Compare
E0320.jpg1/2" Pressure Reducing Backflow Preventer
Locke Part #: E0320MFG Part #: BFAC 1/2/ 23029-0014 Compare
M1708.jpg1/2" Pressure Vacuum Breaker Assembly
Locke Part #: M1708MFG Part #: 720A 1/2" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg1/2" Reduced Pressure Backflow Preventer
Locke Part #: M0999MFG Part #: 0391002 Compare
M1120.jpg1/2" Reduced Pressure Backflow Preventer
Locke Part #: M1120MFG Part #: 0792024 LF008PCQT Compare
BLF9102.jpg1/2" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1172MFG Part #: 77FLF20301 1/2" Compare
Item: M1172, Size (in): 1/2, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M1514.jpg1/2" Swing Check Valve C x C
Locke Part #: M1514MFG Part #: 521C03LF Compare
200 lb. pressure for water, oil or air. Cast Brass. Main use is to prevent backflow of fluids. C x C
M0514.jpg1/2" Swing Check Valve IPS
Locke Part #: M0514MFG Part #: M514 LF Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
E0050.jpg1/2" Tempering Valve
Locke Part #: E0050MFG Part #: 0559132 Compare
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
d0358.jpg1/2" Vacuum Breaker
Locke Part #: D0358MFG Part #: B-0969 Compare
To Replace/Repair Vacuum Breaker On D0307 & D0308
M1692.jpg1/2" Water Pressure Reducing Valve
Locke Part #: M1692MFG Part #: 1/2 NR3XL Compare
M1030.jpg1/2" Wye Strainer Kit with Nipple
Locke Part #: M1030MFG Part #: 0379111 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
F0790.jpg1/2" x 3" I.P. 1 Bolt Style
Locke Part #: F0790MFG Part #: 330-033 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
F0790.jpg1/2" x 6" I.P. 2 Bolt Style
Locke Part #: F0825MFG Part #: 330-036 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
KTBRPX19X C_STD.jpg1/2"NOM BRB X 3/8"OD ANGVA
Locke Part #: B0329MFG Part #: KTBRPX19X C Compare
Size: 1/2” Nom crimp barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance O-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability, and long-lasting performance, Brass stem is assembled from the inside out with two O-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents O-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance, and a sleek appearance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, 100% leak tested, 100% Compliant product available, For use in potable water distribution systems
KTBRPX14X C_EXP.jpg1/2"NOM BRB X 3/8"OD STRVAL
Locke Part #: B0330MFG Part #: KTBRPX14X C Compare
Size: Straight 1/2" Nom Barb x 3/8" OD Comp, Finish: Chrome, Quantity: 60, Weight (LBS): 13.2
BRPX19X C_STD.jpg1/2"NOM BRBX 3/8 OD ANGVLV PX TBING
Locke Part #: B0303MFG Part #: BRPX19X C Compare
Size: 1/2” nom crimp barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, Knurled oval handle provides a secure grip and smooth on/off operation,, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
BRPX14X C_STD.jpg1/2 NOM BRBX 3/8"OD STRVLV PX TBING
Locke Part #: B0304MFG Part #: BRPX14X C Compare
Size: 1/2” Nom. Barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, Knurled oval handle provides a secure grip and smooth on/off operation,, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
CR1900DVSX R_STD.jpg1/2 NOM COMP X 3/8 OD X 1/4 OD OFFSET 180 RGH
Locke Part #: B0448MFG Part #: CR1900DVSX R Compare
Size: 1/2" Nom compression x 3/8” OD compression x 1/4” OD compression, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Independent flow control. Dual outlet, dual shut-off operation permits you to shut-off water flow to one fixture while maintaining water flow to another fixture, Code approved replacement where separate shut-offs are required for two lines, Knurled oval handle provides a secure grip and smooth on/off operation, Straight inlet to outlet design (same-side outlets) is great for installations in tight spaces, Machined one-piece brass body provides strength, durability, and long-lasting performance, For use with water in accessible locations only., Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% compliant product available,, Not intended for recirculating systems that produce continuous use temperatures above 115 F.
G2PS19X C.jpg1/2 NOM PUSH CONNECT X 3/8 OD CON X 3/8CMP CHR
Locke Part #: B0372MFG Part #: G2PS19X C Compare
Size: 1/2” Nom push connect x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Compatible with PEX, copper, and CPVC., Compact machined one-piece body design, Pre-inserted tube stiffener is installation ready for a faster connection, Fast, reliable, secure, Smooth 1/4 turn operation, 100% leak tested, 100% Compliant, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
Product Image Not Available1/2 NOM PUSH CONNECT X 3/8 OD CON X 3/8CMP CHR
Locke Part #: B0373MFG Part #: G2PS14X C Compare
Size: 1/2” Nom push connect x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Compatible with PEX, copper, and CPVC., Compact machined one-piece body design, Pre-inserted tube stiffener is installation ready for a faster connection, Fast, reliable, secure, Smooth 1/4 turn operation, 100% leak tested, 100% Compliant, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
M0998.jpg1/4" - 1/2" 009, 3/4" 009 M2
Locke Part #: M0998MFG Part #: 0881399 Compare
Product Image Not Available1/4" Beveled Faucet 100 Pack
Locke Part #: M1611MFG Part #: W232 Compare
BLF9101.jpg1/4" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1160MFG Part #: 77FLF10101 1/4" Compare
Item: M1160, Size (in): 1/4, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Product Image Not Available1/4" Flat Bibb Washers 100 Pack
Locke Part #: M1619MFG Part #: W232A Compare
Product Image Not Available1/4" Flat Bibb Washers 100 Pack
Locke Part #: M1620MFG Part #: W233A Compare
C0227.jpg1/4" Head Nut
Locke Part #: C0227MFG Part #: 60 Compare
Product Image Not Available1/4" L Beveled Faucet 100 Pack
Locke Part #: M1612MFG Part #: W233 Compare
E0378.jpg1/4" Pilot Assembly Lighter
Locke Part #: E0423MFG Part #: 233-40248-08 Compare
C0237.jpg1/4" x 12" Brass Float Rod
Locke Part #: C0237MFG Part #: 103 Compare
C0219.jpg1/4" x 2-1/2" Closet Screws
Locke Part #: C0219MFG Part #: C219 Compare
C0222.jpg1/4" x 2-1/4" Bolts
Locke Part #: C0222MFG Part #: C02001B Compare
C0222.jpg1/4" x 3-1/2" Bolts
Locke Part #: C0223MFG Part #: 21SNWRW-TP Compare
C0219.jpg1/4" x 3-1/2" Closet Screws
Locke Part #: C0220MFG Part #: C220 Compare
G0262.jpg1/4" x 4" Flat Head Bolt
Locke Part #: G0262MFG Part #: 1649 Compare
Size: 1/4" x 4" Flat head machine screw. Plated.
M0449.jpg1/4"- 4" OD Pipe Roof Flashing
Locke Part #: M0449MFG Part #: 025-40 Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
M0449.jpg1/4"-4" Red HI-Temp Flashing
Locke Part #: M2449MFG Part #: #3 SILICONE RED Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
G2CEPX19X C_STD.jpg1/4 TRN ANG VLV 1/2 NOM X 3/8 CMP
Locke Part #: B0266MFG Part #: G2CR19X C Compare
Size: 1/2” Nom Compression x 3/8” OD Compression, Chrome Plated, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% Leak tested, No Lead, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), Not intended for recirculating water systems that produce continuous use temperatures above 115 F., For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems.
G2R17X C_STD.jpg1/4 TURN ANG VLV 1/2 FIP X 3/8 CMP CP
Locke Part #: B0268MFG Part #: G2R17X C Compare
Size: 1/2” F.I.P. x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-Piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut-off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% leak tested, Machined one-piece brass body provides strength, durability and long-lasting performance, Easy-to-remove handle with screw attachment protects accidental operation during rough-ins, Compliant G2 Stops available for California and Vermont no-lead Requirements, For use in potable water distribution systems., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, Two high-performance O-rings withstand high temperatures and corrosion from harsh water environments, Machined, extruded brass body provides strength, durability, and long-lasting performance, Blow-out-proof brass stem is assembled from the inside out with two O-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Exclusive, chrome-plated metal handle is designed for durability, corrosion resistance, & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% leak tested, 100% compliant product available, For use with water in accessible locations only.
Size: 1/2” Nom Compression x 1/4” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% Leak tested, No Lead, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), Not intended for recirculating water systems that produce continuous use temperatures above 115 F., For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems.
Size: 1/2” nom CPVC x 3/8” OD compression, Finish: Chrome One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut-off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, 100% leak tested, 100% Compliant product available, For use with water in accessible locations only., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
G2CR14X C_STD.jpg1/4 TURN STR VLV 1/2 NOM X 3/8 CMP CP
Locke Part #: B0267MFG Part #: G2CR14X C Compare
Size: 1/2” Nom compression x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-Piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, 100% Leak tested, No Lead, For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance o-rings withstand high temperatures and corrosion from harsh water environments, 100% leak tested, Machined one-piece brass body provides strength, durability and long-lasting performance, Blow-out proof brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, Compliant KT Stops available for California and Vermont low-lead requirements, For use in potable water distribution systems
Size: 1/2” Nom compression x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, Two high-performance o-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability, and long-lasting performance, Brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Exclusive, plated metal handle is designed for durability, corrosion resistance, and a sleek appearance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, 100% Leak tested. No Lead, For use with water in accessible locations only.
60PT-4_STD.jpg1/4-in OD Tube Sleeves for Plastic Tube
Locke Part #: M0035MFG Part #: 60PT-4 Compare
Size: 1/4” OD Tube, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum For use with PEX, vinyl and polyethylene tubing in potable water distribution systems, Not intended for use with steel, copper or aluminum tubing
E0378.jpg1/8" Natural Gas Pilot Assembly
Locke Part #: E0435MFG Part #: 233-40248-05 Compare
Length: 18", Inside Diameter: 1", End Connection Size: 1" FIP x 1" FIP, Temperature Rating: 40 - 250°F 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
C0230.jpg1 Pair 5/16" x 3-1/4" of Bolts
Locke Part #: C0230MFG Part #: C230 Compare
A0310.jpg1 Pair of handles only. Less inserts
Locke Part #: A0310MFG Part #: 98-0400 Compare
C0252.jpg1 Pair White Caps
Locke Part #: C0252MFG Part #: 917-PR Compare
D0425.jpg1-1/2", 17 Gauge "P" Trap, With Brass Nuts
Locke Part #: D0436MFG Part #: 105B Compare
Size: 1-1/2"
D0425.jpg1-1/2", 20 Gauge "P" Trap, With Brass Nuts
Locke Part #: D0431MFG Part #: 104B Compare
Size: 1-1/2"
D0425.jpg1-1/2", 22 Gauge "P" Trap, Less Clean-Outs
Locke Part #: D0425MFG Part #: 104X Compare
Size: 1-1/2"
M1402.jpg1-1/2", White Plastic
Locke Part #: M1409MFG Part #: 7949W Compare
D0427.jpg1-1/2" 20 Gauge Repair P-Trap
Locke Part #: D0427MFG Part #: 109 Compare
Size: 1-1/2"
D0428.jpg1-1/2" 22 Gauge
Locke Part #: D0428MFG Part #: 120X Compare
Size: 1-1/2" Satin Chrome
D0432.jpg1-1/2" 22 Gauge J Bend
Locke Part #: D0432MFG Part #: 131X Compare
Size: 1-1/2"
D0499.jpg1-1/2" 45° Slip Joint Ell
Locke Part #: D0499MFG Part #: 453 Compare
Size: 1-1/2"
D0498.jpg1-1/2" 90 Degree Satin Chrome
Locke Part #: D0498MFG Part #: 451 Compare
Size: 1-1/2"
M0098.jpg1-1/2" Auto. Plumbing Vent
Locke Part #: M0098MFG Part #: PV140BB Compare
D0501.jpg1-1/2" Baffled Tee
Locke Part #: D0501MFG Part #: 829T Compare
Size: 1-1/2" Satin Chrome
C0248.jpg1-1/2" Brass Closet Spud
Locke Part #: C0248MFG Part #: 959 Compare
M0931.jpg1-1/2" C x C Brass Ball Valve
Locke Part #: M0935MFG Part #: 94ALF20701A Compare
M15.jpg1-1/2" Chrome Plated Escutcheon
Locke Part #: M0020MFG Part #: 165 Compare
M674.jpg1-1/2" Cloth Insert Washer
Locke Part #: M0674MFG Part #: 302B Compare
M670.jpg1-1/2" Cut Slip-Joint Washer
Locke Part #: M0671MFG Part #: W310 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
290-20313.jpg1-1/2" Drip-Free Slip Joint Washer
Locke Part #: M0695MFG Part #: 290-20310 Compare
M696.jpg1-1/2" Drip-Free Tailpiece Washer
Locke Part #: M0696MFG Part #: 290-20380 Compare
25 per bag
R0909.jpg1-1/2" DWV Slip Joint P-Trap
Locke Part #: R0909MFG Part #: 4892 1 1/2" Compare
LA pattern,1-1/2" with slip joint nut & union, SJ x Hub.
D4027.jpg1-1/2" Elbow
Locke Part #: D4027MFG Part #: 521YPVC Compare
Used To Extend A Sink Trap Installation. Includes Reducing Adapter From 1-1/2" To 1-1/4".
BLF9101.jpg1-1/2" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1166MFG Part #: 77FLF10701 1 1/2" Compare
Item: M1166, Size (in): 1-1/2, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Size: with PVC adapter, Quantity: 12, Interleaved: 10021449974056, Dimensions (in): 13 x 10 x 6, Cubic Feet: 0.45 The Micro Size Magic Vent AAV has a 1 1/2 inch female threaded connection; however the valve is rated for 1 1/4 inch to 2 inch individual or branch vent pipes., Eliminates roof penetrations, When used in combination with the Magic Trap fitting, it is the quickest way to install a venting system, Great design flexibility, Permitted for use in accordance with: IPC 2012, Sec 917; IRC 2012; Manufactured Housing Construction and Safety Standard 2001, When used in combination with the Magic Trap fitting, it is the quickest way to install a venting system., Magic Vent Micro is also available with ABS or PVC adapter for easy installation in a wall cavity., U.S. Patent No. D427, 286.
Product Image Not Available1-1/2" Flanged Spud Washer
Locke Part #: M0705MFG Part #: W365 Compare
M0925.jpg1-1/2" IPS Brass Ball Valve
Locke Part #: M0929MFG Part #: 94ALF10701A Compare
M0027.jpg1-1/2" IPS F&C Plate
Locke Part #: M0031MFG Part #: 277 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M1402.jpg1-1/2" IPS x 1-3/4" Deep, Chrome
Locke Part #: M1404MFG Part #: 218 Compare
D4029.jpg1-1/2" Joint Nut
Locke Part #: D4029MFG Part #: 201YPVC Compare
PVC Slip Nuts Are Used To Secure Joints & Prevent Leaking. Simply Tighten To Secure.
M0435.jpg1-1/2" Lead Boot Flashing
Locke Part #: M0435MFG Part #: ECONOMY 1-1/2" Compare
97402.jpg1-1/2" Magic Trap with Threaded Tee
Locke Part #: D0531MFG Part #: 97402 Compare
Quantity: 12, Interleaved: 10021449974025, Dimensions (in): 12 x 12 x 12, Cubic Feet: 1.00 A 1-1/2 inch tubular polypropylene fitting., The Magic Trap fitting replaces any standard 1 1/2 inch tubular trap., The Micro size Magic Vent AAV screws directly onto the tee connection of the Magic Trap fitting., It automatically places the Magic Vent at the required 4 inch height above the drain pipe to which it is connected., The installation time for the vent system is approximately 25 seconds., Saves time and money.
M25.jpg1-1/2" OD Escutcheons
Locke Part #: M0026MFG Part #: 213 Compare
M1015.jpg1-1/2" Pressure Breaker
Locke Part #: M1028MFG Part #: 0792014 Compare
M1708.jpg1-1/2" Pressure Vacuum Breaker Assembly
Locke Part #: M1712MFG Part #: 720A 1-1/2" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
D0535.jpg1-1/2" PVC Disposer Waste With Baffle Tee
Locke Part #: D0535MFG Part #: 600PPVCBG Compare
Size: 1-1/2"
D0533.jpg1-1/2" PVC P-Trap
Locke Part #: D0533MFG Part #: 837PVCBG Compare
Size: 1-1/2" Bayonet locking system takes one 1/4 turn to guarantee a secure, no leak tubular connection
M0999.jpg1-1/2" Reduced Pressure Backflow Preventer
Locke Part #: M1003MFG Part #: 0065375 Compare
D0433.jpg1-1/2" Slip Joint Repair Coupling
Locke Part #: D0433MFG Part #: 449 Compare
Size: 1-1/2"
BLF9102.jpg1-1/2" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1176MFG Part #: 77FLF20701 1 1/2" Compare
Item: M1176, Size (in): 1-1/2, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M709.jpg1-1/2" Stopper
Locke Part #: M0709MFG Part #: S104 Compare
M0514.jpg1-1/2" Swing Check Valve IPS
Locke Part #: M0518MFG Part #: M518 LF Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
D0558.jpg1-1/2" Trap
Locke Part #: D0558MFG Part #: P9046A Compare
Size: 1-1/2"
M1025.jpg1-1/2" Water Press. Reduc. Valve
Locke Part #: M1026MFG Part #: 0009431 Compare
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1030.jpg1-1/2" Wye Strainer Kit with Nipple
Locke Part #: M1034MFG Part #: 0379115 LF777SI Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
D0438.jpg1-1/2" x 1-1/2"
Locke Part #: D0438MFG Part #: 105CO Compare
Size: 1-1/2" x 1-1/2" Chrome plated with clean-out.
M0008.jpg1-1/2" x 1-1/2" Slip Joint Nut
Locke Part #: M0009MFG Part #: 310-C Compare
M670.jpg1-1/2" x 1-1/4" Cut Slip-Joint Washer
Locke Part #: M0664MFG Part #: W312 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
D0536.jpg1-1/2" x 1-1/4" PVC Plastic "P" Trap
Locke Part #: D0536MFG Part #: 802NPVCBG Compare
Size: 1-1/2" x 1-1/4" With 1-1/4" slip joint washer. Adapts to Schedule 40 pipe out of the wall.
D0537.jpg1-1/2" x 1-1/4" S Trap
Locke Part #: D0537MFG Part #: 816PVCBG Compare
Size: 1-1/2" x 1-1/4"
M0008.jpg1-1/2" x 1-1/4 Slip Joint Nut
Locke Part #: M0011MFG Part #: 312-C Compare
D0455.jpg1-1/2" x 12"
Locke Part #: D0458MFG Part #: 428 Compare
Size: 1-1/2" x 12" For Sink Strainers Regular, satin chrome.
M0002.jpg1-1/2" x 12" 16 Gauge 4 Hole
Locke Part #: M0003MFG Part #: PS 1216 Compare
Extra long protection of mechanical runs., Heavy steel
D0544.jpg1-1/2" x 12" PVC
Locke Part #: D0545MFG Part #: 918PVC Compare
Size: 1-1/2" x 12"
D0465.jpg1-1/2" x 12" Satin Chrome
Locke Part #: D0468MFG Part #: 444-12 Compare
Size: 1-1/2" x 12"
D0541.jpg1-1/2" x 12" Tailpiece
Locke Part #: D0541MFG Part #: 903PVC Compare
Size: 1-1/2" x 12" Poly washers are supplied for kitchen or lavatory installation.
D0471.jpg1-1/2" x 12" Tube
Locke Part #: D0471MFG Part #: 817 Compare
Size: 1-1/2" Satin Chrome. Threaded at both ends.
D4039.jpg1-1/2" x 12 White PVC
Locke Part #: D4039MFG Part #: 912PVC Compare
Size: 1-1/2" x 12 Solvent weld type, one end.
D0542.jpg1-1/2" x 15" Waste Arm
Locke Part #: D0542MFG Part #: 5134YPVC Compare
Size: 1-1/2"x15"
D0443.jpg1-1/2" x 16" C/O Hi-Line Continuous Waste
Locke Part #: D0443MFG Part #: 820 Compare
Size: 1-1/2" X 16" Satin Chrome. Direct Hookup To Strainer.
D0442.jpg1-1/2" x 16" C/O Regular Continous Waste
Locke Part #: D0442MFG Part #: 2823 Compare
Size: 1-1/2" X 16" Satin chrome. Slip Joint
D0441.jpg1-1/2" x 16" E/O Hi-Line Continuous Waste
Locke Part #: D0441MFG Part #: 826 Compare
Size: 1-1/2" X 16" Satin Chrome. Direct Hookup To Strainer.
D0440.jpg1-1/2" x 16" E/O Regular Continuous Waste
Locke Part #: D0440MFG Part #: 829 Compare
Size: 1-1/2" X 16" Satin chrome. Slip Joint
D0546.jpg1-1/2" x 16" PVC Double Flanged
Locke Part #: D0546MFG Part #: 904PVC Compare
Size: 1-1/2" x 16"
D0534.jpg1-1/2" x 16" White PVC With Nuts
Locke Part #: D0534MFG Part #: 919PVC Compare
Size: 1-1/2" x 16"
D0538.jpg1-1/2" x 16 Center Outlet
Locke Part #: D0540MFG Part #: TW516UPVCBG Compare
Size: 1-1/2" x 16 Adapts to either high-line or regular connections.
D0538.jpg1-1/2" x 16 End Outlet
Locke Part #: D0538MFG Part #: T540YUPVCBG Compare
Size: 1-1/2" x 16 Adapts to either high-line or regular connections.
M0002.jpg1-1/2" x 18" 16 Gauge 4 Hole
Locke Part #: M0004MFG Part #: PS 1816 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg1-1/2" x 18" 16 Gauge 8 Hole
Locke Part #: M0013MFG Part #: PS 1816 8 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0001.jpg1-1/2" x 24" Stud Guard, 18 Gauge
Locke Part #: M0012MFG Part #: SP 2418 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
M0001.jpg1-1/2" x 3" Stud Guard, 16 Gauge
Locke Part #: M1303MFG Part #: SP316100 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
D0455.jpg1-1/2" x 4"
Locke Part #: D0455MFG Part #: 424 Compare
Size: 1-1/2" x 4" For Sink Strainers Regular, satin chrome.
M0001.jpg1-1/2" x 5" Stud Guard, 16 Gauge
Locke Part #: M0001MFG Part #: SP 516100 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
D0455.jpg1-1/2" x 6"
Locke Part #: D0456MFG Part #: 425 Compare
Size: 1-1/2" x 6" For Sink Strainers Regular, satin chrome.
M0002.jpg1-1/2" x 6" 16 Gauge 3 Hole
Locke Part #: M5076MFG Part #: PS0616-3 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
D0465.jpg1-1/2" x 6" Satin Chrome
Locke Part #: D0465MFG Part #: 444-6 Compare
Size: 1-1/2" x 6"
D0455.jpg1-1/2" x 8"
Locke Part #: D0457MFG Part #: 426 Compare
Size: 1-1/2" x 8" For Sink Strainers Regular, satin chrome.
Size: 1-1/2" X 8" Gravity feed, no mechanical parts, Replenishes water in floor drain traps to prevent the escape of sewer gases
D0508.jpg1-1/2" x 8" Dish. Tip
Locke Part #: D0508MFG Part #: 925 Compare
Size: 1-1/2" x 8" Satin Chrome
D0544.jpg1-1/2" x 8" PVC
Locke Part #: D0544MFG Part #: 917PVC Compare
Size: 1-1/2" x 8"
Size: 1-1/2" x 8"
Size: 1-1/2" x 8"
Size: 1-1/2" x 8"
D0465.jpg1-1/2" x 8" Satin Chrome
Locke Part #: D0466MFG Part #: 444-8 Compare
Size: 1-1/2" x 8"
M0002.jpg1-1/2" x 9" 16 Gauge 4 Hole
Locke Part #: M0002MFG Part #: PS 0916 Compare
Extra long protection of mechanical runs., Heavy steel
M0001.jpg1-1/2" x 9" Stud Guard, 18 Gauge
Locke Part #: M0006MFG Part #: SP 0918 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
P-1610.jpg1-1/2” J-Hook with Nail
Locke Part #: M1440MFG Part #: 33740 Compare
Case Quantity: 125, Item: M1440, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
M1405.jpg1-1/2 IPS Flange Trim- Tite Escutcheon
Locke Part #: M1407MFG Part #: 921-6W Compare
White Plastic, Shallow.
M1402.jpg1-1/4", Chrome
Locke Part #: M1403MFG Part #: 216 Compare
D4013.jpg1-1/4" & 1-1/2" P Trap
Locke Part #: D4013MFG Part #: 805PVCBG Compare
Replaces Conventional Metal P Trap With Non-Corrosive PVC Plastic.
D4017.jpg1-1/4" & 1-1/2"J Bend
Locke Part #: D4017MFG Part #: 810PVCBG Compare
PVC Noncorrosive Replacement "J" Bend. Can Be Used With The Conventional Metal Tubular Products.
Round Gasket.jpg1-1/4" - 1-1/2" Flange Replacement Gasket
Locke Part #: E1173MFG Part #: 91130185 Compare
M0998.jpg1-1/4" - 2" 009M1, or 1" - 3" 009/909, Air Gap
Locke Part #: M0996MFG Part #: 0881576 Compare
C0248.jpg1-1/4" Brass Closet Spud
Locke Part #: C0245MFG Part #: 57-0515 Compare
M0931.jpg1-1/4" C x C Brass Ball Valve
Locke Part #: M0934MFG Part #: 94ALF20601A Compare
M15.jpg1-1/4" Chrome Plated Escutcheon
Locke Part #: M0019MFG Part #: 164 Compare
M670.jpg1-1/4" Cut Slip-Joint Washer
Locke Part #: M0670MFG Part #: W309 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
290-20313.jpg1-1/4" Drip-Free Slip Joint Washer
Locke Part #: M0694MFG Part #: 290-20300 Compare
BLF9101.jpg1-1/4" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1165MFG Part #: 77FLF10601 1 1/4" Compare
Item: M1165, Size (in): 1-1/4, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
M1517.jpg1-1/4" FIP x 1-1/4" FIP Check Valve
Locke Part #: M1519MFG Part #: CVNL125 Compare
Model: W364, Size: 1-1/4"
M0702.jpg1-1/4" ID, 2" OD Gasket
Locke Part #: M0702MFG Part #: G12 Compare
M0925.jpg1-1/4" IPS Brass Ball Valve
Locke Part #: M0928MFG Part #: 94ALF10601A Compare
M0027.jpg1-1/4" IPS F&C Plate
Locke Part #: M0030MFG Part #: 1237L Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M1402.jpg1-1/4" IPS x 1-1/2" Deep, Chrome
Locke Part #: M1402MFG Part #: 215 Compare
M25.jpg1-1/4" OD Escutcheons
Locke Part #: M0025MFG Part #: 212 Compare
M1015.jpg1-1/4" Pressure Breaker
Locke Part #: M1024MFG Part #: 0792013 Compare
M0999.jpg1-1/4" Reduced Pressure Backflow Preventer
Locke Part #: M1002MFG Part #: 0065374 Compare
BLF9102.jpg1-1/4" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1175MFG Part #: 77FLF20601 1 1/4" Compare
Item: M1175, Size (in): 1-1/4, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
E1130.jpg1-1/4" Sweat
Locke Part #: E1132MFG Part #: 50415W Compare
Eliminating leak paths in the system, Shortening installation times, Exclusive purge & drain feature, 600 WOG 150 WSP, Prevents electrolysis and eliminates galvanic corrosion, Includes mounting bolts, nuts and an additional wing style T handle, Allows virtually no air into the system upon pump replacement, Fits most circulator pumps, Adjustable packing gland for lifetime protection, Threaded ends comply with ANSI B1.20.1, Solder ends comply with ANSI B16.18, Hose threads comply with B1.20.7, Quick quarter turn ball valve
E1134.jpg1-1/4" Sweat
Locke Part #: E1136MFG Part #: 50615W Compare
Eliminating leak paths in the system, Shortening installation times, Fight the increasing costs of raw materials with step and time saving innovation methods
M0514.jpg1-1/4" Swing Check Valve IPS
Locke Part #: M0517MFG Part #: M517 Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
M1025.jpg1-1/4" Water Press. Reduc. Valve
Locke Part #: M1025MFG Part #: 0009392 Compare
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1030.jpg1-1/4" Wye Strainer Kit with Nipple
Locke Part #: M1033MFG Part #: 0379114 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M0008.jpg1-1/4" x 1-1/4" Slip Joint Nut
Locke Part #: M0008MFG Part #: 309-C Compare
F0790.jpg1-1/4" x 3" I.P. 1 Bolt Style
Locke Part #: F0793MFG Part #: 330-063 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
Size: 1-1/4" X 6" Gravity feed, no mechanical parts, Replenishes water in floor drain traps to prevent the escape of sewer gases
B0288.jpg1-1/4" x 6" Fine Thread
Locke Part #: B0288MFG Part #: 213-067 Compare
D0544.jpg1-1/4" x 6" PVC
Locke Part #: B0359MFG Part #: 9164PVC Compare
Size: 1-1/4" x 6"
M1278.jpg1-1/4"-2" Air Gap
Locke Part #: M1278MFG Part #: 0881378 Compare
A2430.jpg1-15/16" Cold
Locke Part #: A2433MFG Part #: 11-3114C Compare
A2430.jpg1-15/16" Hot
Locke Part #: A2432MFG Part #: 11-3114H Compare
A2430.jpg1-15/16" Hot
Locke Part #: A2436MFG Part #: 11-3410H Compare
A2430.jpg1-3/4" Cold
Locke Part #: A2431MFG Part #: 11-3113C Compare
A2430.jpg1-3/4" Hot
Locke Part #: A2430MFG Part #: 11-3113H Compare
M73.jpg1.25" - 2" dia. Sure-Vent™
Locke Part #: M0073MFG Part #: 39220 Compare
The Sure-Vent is a new air admittance valve certified to vent individual/multiple fixtures easily & reliably. It can withstand positive pressures up to 30 feet of- head.
Aluminum.jpg1.5"-2"-3" Aluminum Roof Flashings
Locke Part #: M0412MFG Part #: AN123 Compare
Warranty: 20 year limited warranty, Color: Mill finish, Type: Aluminum with Premium elastomeric collar Will work on high pitch roof up to 60 .
M0402.jpg1.5"-3" Pipe Flashing
Locke Part #: M0402MFG Part #: 11930 Compare
C0030.jpg1.6 Fill Valve For T8 & HP Western Closets
Locke Part #: C0030MFG Part #: WP16FILLVALVE Compare
For T8 & HP Western Closets
68-9104.jpg10" Anti-Siphon Hoover Ballcock
Locke Part #: C0275MFG Part #: 68-9104 Compare
Ballcock Size: 10"
Size: 10" Fits some Mansfield toilets, For use in 3.5 & 1.6 Gpf toilets, Replaces 08ULF-10 And 88-10, Adjustable water level, Snap action shut-off, Unified, non-electrolytic and non-corrosive construction, Efficient operation at low or high water pressures, Easy to install, Includes 7-1/2" float rod, 7" refill tube, acetal locknut and coupling nut
R1002.jpg10" Rectangular Lid Only
Locke Part #: R2124MFG Part #: 10124001 Compare
Comes with leak proof, snap-in green cover. 10" x 12" x 10" deep with 4" x 4" pipe slot
R1002.jpg10" Rectangular Valve Box With Lid
Locke Part #: R1002MFG Part #: 10121002 Compare
Comes with leak proof, snap-in green cover. 10" x 12" x 10" deep with 4" x 4" pipe slot
PVB10RND_Green-Lid.jpg10" Round Lid Only
Locke Part #: R2123MFG Part #: A12520L Compare
Light & durable construction, Side ridges for additional side wall support, Pre-molded pipe slots, Bottom flanges to help prevent sinking, Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support
M688.jpg100 Assort. Ballcock Screw
Locke Part #: M0688MFG Part #: S-1 14501 Compare
Assortment consists of 100 pieces packed in screw top can. Solid brass faucet screws, nickel-plated eccentric and handle screws, brass thumb screws, and plated cotter pins for ballocks.
M690.jpg100 Assorted O Rings of the Most Popular Sizes
Locke Part #: M0690MFG Part #: R60AP Compare
Size: 11-1/2" Fits some Mansfield toilets including tank model 035, 125, 160, 161, 160RH, 165, 170, 171, 175, 180, 181, 190, Profit1, Profit2 and Profit3, For use in 3.5 & 1.6 Gpf toilets, 11-1/2" with, adjustable water level, Snap action shut-off, Easy to install, Unified, non-electrolytic and non-corrosive construction, Efficient operation at low or high water pressures, Includes 7-1/2" float rod, 7" refill tube, acetal locknut and coupling nut
123-0216.jpg11-1/2" Float Assembly For Models 210, Pack of 50
Locke Part #: C0289MFG Part #: 123-0216-50 Compare
Size: 11-1/2" Converts a Mansfield brand 1.6 gpf to a 2.2 gpf toilet, making it flush twice per trip, For Model 210 Flush Valve - 3.5 GPF
Size: 11-3/4", Material: Plastic, Shipping Weight: Approx. 12 Lb, Water Consumption: 3.5 gpf Replaces most types of flush valves, Includes spud gasket and spud locknut, Fits Mansfield tank models 011, 021, 026, & 035, Fits virtually any tank-type toilet, Also fits the Kilgore 201-WS toilet, Provides a 3.5 gpf, 11-3/4" overall, 10-1/8" from toilet tank to top of valve, Fits model 3.5 gpf tanks, Won't hang up or stick open, Seals tight every time, Accommodates all trip levers (direct connect or chain connect), Installation instructions included, Replacement seals, are available separately, Made in USA
68-9102.jpg12" Anti-Siphon Hoover Ballcock
Locke Part #: C0274MFG Part #: 68-9102 Compare
Ballcock Size: 12"
OCR19B120DLXC.jpg12" Braided Connector 1/2" Nom Compression x 7/8" Ballcock
Locke Part #: C0202MFG Part #: OCR19B120DLX C Compare
Size: 1/2" Nom Compression x 7/8" Ballcock, Length (in): 12, Quantity: 50, Weight (LBS): 18.5
Size: 12", Material: Plastic, Water Consumption: 1.6 Gpf/6.0 Lpf Won't hang up or stick open, Includes spud gasket and locknut, #211 looks similar to the #210 but is calibrated at 1.6gpf and can be used with chain, Installation instructions included, Fits models 125, 159, 160, 161, 165, 170, 171, 175, 180, 181, 190, Profit1, Profit2 and Profit3, 12" overall, 10-1/8" from toilet tank to top of valve, Seals tight every time, Provides 1.6 Gpf/6.0 Lpf water consumption, Accommodates all trip levers (direct connect or chain connect), Replacement seals, are available separately,, Made in USA
universal-gas-valve-key-18-polished-chrome.jpg12" Polished Chrome Gas Fireplace Key.
Locke Part #: M1473MFG Part #: NKY.12 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 12" Length, Use With: 1/4" or 5/16" Gas Valve Stems, Polish: Chrome
R2122.jpg12" Rectangular Lid Only
Locke Part #: R2122MFG Part #: DS12001L Compare
Standard 12" rectangular box with leak proof, Snap-in green cover, 12" deep
PB1001.jpg12 Piece Valley Repair Kit
Locke Part #: D0553MFG Part #: PB 1001 Compare
Packaging: 12 Piece
A2182.jpg120pc Bibb seal kit
Locke Part #: A2182MFG Part #: AB555-1120 Compare
Transformer.jpg120V Transformer for CC & CR Series
Locke Part #: E1403MFG Part #: BH1205006A Compare
D0482.jpg13/16" Male Aerator
Locke Part #: D0482MFG Part #: 464FR Compare
13/16"-27" outside threads, for use on small faucet with inside threads.
d600e-ext_3.jpg14" x 19" x 6" AMR Meter Box Extension
Locke Part #: F0048MFG Part #: D600E EXT Compare
Color: Black
Color: Black, Weight: 2.6
Color: Black
Item: B0654 PUSHON, over existing ferrule., Designed to be pushed onto copper and CPVC pipe with or without a brass compression ferrule., Tested to 1,000 psi., Easy Pull/Push ON/OFF Handle., Original one-piece factory attached connector, Removable and Reusable., 100% non-metallic water contact., NSF certified, Clean look., 1/2 nom. with attached PVC or Braided High Performance connector, x 1/2 reinforced polymer IPS nut with escutcheon.
D0481.jpg15/16" Male Aerator
Locke Part #: D0481MFG Part #: 462FR Compare
15/16"-17" outside threads, for use on regular faucet with inside threads.
M1650.jpg150 Assorted Washers With Six 10-24 Screws
Locke Part #: M1650MFG Part #: 291-30125 Compare
SBR (synthetic blended rubber)
291-30125.jpg150 Assorted Washers With Six 10-24 Screws
Locke Part #: M1652MFG Part #: 291-30225 Compare
SBR (synthetic blended rubber)
E0105.jpg1500W 120V
Locke Part #: E0105MFG Part #: 265-42540-02 Compare
For Flanged Elements:
E0113.jpg1500W 120V
Locke Part #: E0113MFG Part #: 265-42541-02 Compare
Sand and Lime Fighter Element For Flanged Elements:
E0114.jpg1500W 120V
Locke Part #: E0114MFG Part #: 265-42540-03 Compare
For Flanged Elements:
Type: Ultra LWD, Qty: 12, Watts @ 120v: 1500w, Nominal Voltage: 120v, Min Tank Diameter: 9" Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
E0113.jpg1500W 240V
Locke Part #: E0055MFG Part #: 265-42545-13 Compare
Sand and Lime Fighter Element For Flanged Elements:
A2181.jpg150pc O-ring kit
Locke Part #: A2181MFG Part #: 540-0151 Compare
Color: Silver, Material: Metal, Dimension (L x W): 16” x 3-1/4”, Weight (lbs): 0.85
291-30125.jpg170 Washers With Snap-In Chrome Wire Holders
Locke Part #: M1653MFG Part #: 291-30226 Compare
SBR (synthetic blended rubber)
universal-gas-valve-key-18-polished-chrome.jpg18" Polished Chrome Gas Fireplace Key.
Locke Part #: M1474MFG Part #: NKY.18 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 18" Length, Use With: 1/4" or 5/16" Gas Valve Stems & Fire Pits, Polish: Chrome
F0045.jpg18" x 24" Round Plastic Water Meter Can With Lid
Locke Part #: F0045MFG Part #: 22001006 Compare
Plastic valve boxes and lids are structurally molded of noncorrosive Polyethylene, using a patented process.
A0426.jpg2" Adjust. Chrome head
Locke Part #: A0427MFG Part #: F-15 Compare
C0249.jpg2" Brass Closet Spud
Locke Part #: C0249MFG Part #: C249 Compare
p54200.jpg2" Brass Plug For Extension Cover 2-3/8" OD
Locke Part #: G0263MFG Part #: P54-200 Compare
Size: 2", Outer Dimension: 2-5/16" Countersunk plug tapped 1/4-20, Stainless Steel
M0931.jpg2" C x C Brass Ball Valve
Locke Part #: M0936MFG Part #: 94ALF20801A Compare
M15.jpg2" Chrome Plated Escutcheon
Locke Part #: M0021MFG Part #: 166 Compare
A0426.jpg2" Chrome plated water saver
Locke Part #: A0426MFG Part #: A426 Compare
T1500a.jpg2" Clean Seal Plug
Locke Part #: T1500MFG Part #: 271705 Compare
M670.jpg2" Cut Slip-Joint Washer
Locke Part #: M0672MFG Part #: W313 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
M1276.jpg2" Double Check Valve Assembly
Locke Part #: M1276MFG Part #: 0063235 Compare
BLF9101.jpg2" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1167MFG Part #: 77FLF10801 2" Compare
Item: M1167, Size (in): 2, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Product Image Not Available2" Flanged Spud Washer
Locke Part #: M0706MFG Part #: W366 Compare
C0247.jpg2" Flush Valve
Locke Part #: C0247MFG Part #: C247 Compare
M0925.jpg2" IPS Brass Ball Valve
Locke Part #: M0930MFG Part #: 94ALF10801A Compare
M0027.jpg2" IPS F&C Plate
Locke Part #: M0032MFG Part #: 278 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M0435.jpg2" Lead Boot Flashing
Locke Part #: M0436MFG Part #: ECONOMY 2" Compare
M547.jpg2" Plastic Backwater Valve
Locke Part #: M0547MFG Part #: 802-7 Compare
Usually used in floor drains. Prevents backflow or flooding if drain lines get stopped up. 2" MIP.
M1015.jpg2" Pressure Breaker
Locke Part #: M1029MFG Part #: 0792015 Compare
M1708.jpg2" Pressure Vacuum Breaker Assembly
Locke Part #: M1713MFG Part #: 720A 2" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg2" Reduced Pressure Backflow Preventer
Locke Part #: M1004MFG Part #: 0065376 Compare
BLF9102.jpg2" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1177MFG Part #: 77FLF20801 2" Compare
Item: M1177, Size (in): 2, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M0514.jpg2" Swing Check Valve IPS
Locke Part #: M0519MFG Part #: M519 Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
M1025.jpg2" Water Press. Reduc. Valve
Locke Part #: M1027MFG Part #: 0009465 Compare
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1030.jpg2" Wye Strainer Kit with Nipple
Locke Part #: M1035MFG Part #: 0379116 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M0008.jpg2" x 2" Slip Joint Nut
Locke Part #: M0010MFG Part #: 313-C Compare
R2131.jpg2" x 3" Drain with Strainer
Locke Part #: R2131MFG Part #: 841-2P Compare
PVC Multi-purpose floor drain. Custom fit your own P-trap or areaway drain. 2" x 3" Schedule 40.
R2131.jpg2" x 3" threaded drain, 2" FIP
Locke Part #: R2132MFG Part #: 841-2PH Compare
PVC Multi-purpose floor drain. Custom fit your own P-trap or areaway drain. 2" x 3" Schedule 40.
P-1610.jpg2” J-Hook with Nail
Locke Part #: M1441MFG Part #: 33741 Compare
Case Quantity: 125, Item: M1441, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
C0211.jpg2 x 5" x 7" Chrome
Locke Part #: C0211MFG Part #: 34514 Compare
E0044.jpg2-1/2" Brass Valve
Locke Part #: E0042MFG Part #: 265-42351-04 Compare
C0226.jpg2-1/4" Closet Bolts; 1 pair
Locke Part #: C0226MFG Part #: 425-PB Compare
A2430.jpg2-1/4" Cold
Locke Part #: A2435MFG Part #: 11-3210C Compare
A2430.jpg2-1/4" Hot
Locke Part #: A2434MFG Part #: 11-3210H Compare
M700.jpg2-1/4" ID Flush Valve Washer
Locke Part #: M0700MFG Part #: W326 Compare
630-7984.jpg2-1/8" Dia. Ballcock Service Kit, Pack of 10
Locke Part #: C0203MFG Part #: 630-7984-10 Compare
Dimensions: 2-1/8" Diameter 2-1/8" diameter, Fill valve repair kit for all 08 & 88 fill valves, Includes one (1) upper and one (1) lower diaphragm
A1099.jpg2-1/8" Diverter for D0549
Locke Part #: A1099MFG Part #: A66G391 Compare
Size: 2-3/4"
M0704.jpg2-3/8" Waste & Overflow Washer
Locke Part #: M0704MFG Part #: W513 Compare
Case Quantity: 50, Item: M1308, UOM: EA Post-stamping copper plating for a uniform copper coat., Copper plated for soldering to copper pipe., 20 and 26 Length (Reference table), 16 gauge AISI 1000-Series steel, UPC Certified
Case Quantity: 50, Item: M1283, UOM: EA Angled brackets are designed with ribs for strength,, 14 guage AISI 1000-Series steel, Sturdy, galvanized steel brackets with 1 3/8"keyed holes accommodate grommets for all pipe types, IAPMO, UPC Certified
P-1054.jpg20" Galvanized One-Hole Flat PipeSecure Bracket
Locke Part #: M1286MFG Part #: P-1054 Compare
Case Quantity: 50, Item: M1286, UOM: EA Angled brackets are designed with ribs for strength,, 14 guage AISI 1000-Series steel, Sturdy, galvanized steel brackets with 1 3/8"keyed holes accommodate grommets for all pipe types, IAPMO, UPC Certified
M684.jpg20 Piece Washers & Screws
Locke Part #: M0684MFG Part #: W292BF Compare
Neoprene washer and screw assortment. Contains 20 assorted flat neoprene washers and 4 solid brass screws in a plastic box.
M0676.jpg200 Beveled washers
Locke Part #: M0676MFG Part #: W197B Compare
Made of specially compounded neoprene for resistance to hot or cold water. Packed in plastic boxes.
M0676.jpg200 Flat Washers
Locke Part #: M0685MFG Part #: W197A Compare
Made of specially compounded neoprene for resistance to hot or cold water. Packed in plastic boxes.
universal-gas-valve-key-18-polished-chrome.jpg24" Polished Chrome Gas Fireplace Key.
Locke Part #: M1475MFG Part #: NKY.24 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 24" Length, Use With: 1/4" or 5/16" Gas Valve Stems & Fire Pits, Polish: Chrome
Sold 100 in a pack.
M0400.jpg25 Lb. Bar of Ingot Lead
Locke Part #: M0400MFG Part #: INGOT LEAD Compare
25 Lb. bar only.
M0523.jpg258 Straight Fireplace Valve
Locke Part #: M0523MFG Part #: 258 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
M0523.jpg259 Angle Fireplace Valve
Locke Part #: M0595MFG Part #: 259 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
M1650.jpg270 Washers With Snap-In Chrome Wire Holders
Locke Part #: M1651MFG Part #: 291-30126 Compare
SBR (synthetic blended rubber)
Sold 100 in a pack.
M0449.jpg3" - 6" OD Pipe Roof Flashing
Locke Part #: M0439MFG Part #: 300-60 Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
p54200.jpg3" Brass Plug For Extension Cover 3-3/8" OD
Locke Part #: G0264MFG Part #: P54300 Compare
Size: 3", Outer Dimension: 3-7/16" Countersunk plug tapped 1/4-20, Stainless Steel
T1500a.jpg3" Clean Seal Plug
Locke Part #: T1501MFG Part #: 271713 Compare
C0257.jpg3" Closet Spacer
Locke Part #: C0258MFG Part #: R383300 Compare
For floor & wall closet bowls. Eliminates the need to chip concrete. Break out for coupling adjustments on off-the-floor closet bowls.
243-45787-00.jpg3" Draft Hood
Locke Part #: E0535MFG Part #: 243-45787-00 Compare
Size: 3"
C0032.jpg3" Flapper for Western Closets
Locke Part #: C0032MFG Part #: WP3FLAPPER Compare
C0034.jpg3" Flush valve for Western Closets
Locke Part #: C0034MFG Part #: WP3FLUSHVALVE Compare
M0435.jpg3" Lead Boot Flashing
Locke Part #: M0437MFG Part #: ECONOMY 3" Compare
universal-gas-valve-key-3-polished-chrome.jpg3" Polished Chrome Gas Fireplace Key.
Locke Part #: M0477MFG Part #: BF.KY.01 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 3" Length Removable key insures you that the valve will not be turned on accidentally.
C0036.jpg3" Tank Gasket
Locke Part #: C0036MFG Part #: WP3TTBGASKET Compare
C0198.jpg3" Universal Flapper
Locke Part #: C0198MFG Part #: 5403 Compare
The first and only 3 inch universal Flapper. 2 simple adjustments. Silicone seal.
M0002.jpg3" x 12" 16 Gauge FHA Nail Plate Strap
Locke Part #: M1320MFG Part #: PS1216-3 6 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg3" x 18" 16 Gauge 6 Hole
Locke Part #: M0007MFG Part #: PS 1816-3 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg3" x 24" 16 Gauge 6 Hole
Locke Part #: M1323MFG Part #: PS 2416-3 6 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0001.jpg3" x 5", 16 Gauge
Locke Part #: M1321MFG Part #: SP516100-3 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
M0002.jpg3" x 6" 16 Gauge 12 Hole
Locke Part #: M5070MFG Part #: PS0616-3 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg3" x 9" 16 Gauge 12 Hole
Locke Part #: M5071MFG Part #: PS0916-3 Compare
Extra long protection of mechanical runs., Heavy steel
Aluminum.jpg3"-4" Aluminum Roof Flashings
Locke Part #: M0413MFG Part #: AN340 Compare
Warranty: 20 year limited warranty, Color: Mill finish, Type: Aluminum with Premium elastomeric collar Will work on high pitch roof up to 60 .
M0449.jpg3"-6" Red HI-Temp Flashing
Locke Part #: M2439MFG Part #: #4 SILICONE RED Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
M0998.jpg3/4" - 1-1/2" 009/9091" - 1-1/2" 009M2, Air Gap
Locke Part #: M0997MFG Part #: 0881577 Compare
C0248.jpg3/4" Brass Closet Spud
Locke Part #: C0254MFG Part #: 57-0510 Compare
M0931.jpg3/4" C x C Brass Ball Valve
Locke Part #: M0932MFG Part #: 94ALF20401A Compare
E0305.jpg3/4" C x C Expansion Relief Valve
Locke Part #: E0305MFG Part #: 78RV226125 Compare
3/4" Brass water heater ball valves with 125 Lb. P.S.I. Thermo expansion Relief Valve. Combination 1/2" Copper, sweat & 1/2" threaded outlet fitting on relief valve.
M15.jpg3/4" Chrome Plated Escutcheon
Locke Part #: M0017MFG Part #: 162 Compare
M4565.jpg3/4" Coupling CTS x MIP
Locke Part #: M4565MFG Part #: 74130-102 Compare
M0027.jpg3/4" CWT F&C Plate
Locke Part #: M0023MFG Part #: 281 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M1010.jpg3/4" Double Check
Locke Part #: M1010MFG Part #: 0063231 Compare
Size: 3/4", Weight: 2 lbs, Body: Bronze, Maximum Working Pressure: 400psi (27.6 bar), Temperature Range: 33˚F – 180˚F (0.5˚C – 82˚C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM, Valve Disc: Elastomer, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
BLF9101.jpg3/4" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1163MFG Part #: 77FLF10401 3/4" Compare
Item: M1163, Size (in): 3/4, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
E0048.jpg3/4" FIP Anti-Scald
Locke Part #: E0049MFG Part #: 0559119 Compare
Brass FIP swivel nut includes EPDM gasket
M1517.jpg3/4" FIP x 3/4" FIP Check Valve
Locke Part #: M1517MFG Part #: CVNL75 Compare
E0305.jpg3/4" FIP x FIP Expansion Relief Valve
Locke Part #: E0306MFG Part #: 78RV116125 Compare
3/4" Brass water heater ball valves with 125 Lb. P.S.I. Thermo expansion Relief Valve. Combination 1/2" Copper, sweat & 1/2" threaded outlet fitting on relief valve.
Size: 3/4" FIP x 3/4" Uponor PEX-Barb x 18", Connections: FIP x PEX Barb, Inside Diameter: 3/4"
Size: 3/4" FIP x 3/4" Uponor PEX-Barb x 24", Connections: FIP x PEX Barb, Inside Diameter: 3/4"
M1426.jpg3/4" IP Tee Handle Ball Valve
Locke Part #: M1426MFG Part #: 759T04TSLF Compare
M0925.jpg3/4" IPS Brass Ball Valve
Locke Part #: M0926MFG Part #: 94ALF10401A Compare
M0027.jpg3/4" IPS F&C Plate
Locke Part #: M0028MFG Part #: 1237J Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
Size: 3/4", Weight: 3.5 lbs, Body: Lead Free copper silicon alloy, Maximum Working Pressure: 300psi (20.7 bar), Temperature Range: 33°F – 160°F (0.5°C – 71°C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM with PTFE wetted surface, Valve Disc: EPDM, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa), High Pressure Range: 75–125psi
M4505.jpg3/4" Leather Gaskets
Locke Part #: M4505MFG Part #: 4124057 Compare
Overall Length: 6-7/8, Temperature Range: -40°F to +212°F(-4.4°C to +100°C), Size (NPT): 3/4" Male X Female Swivel Hose, Normal Operating Pressure: 35 to 125 PSIG, Max Spike Pressure: 250 PSIG 3/4" Male x Female Swivel Hose, Only One Moving Part, Maintenance FREE, Construction:, Cap:, Machined of free turning brass, attached to barrel with 95-5 solder, Piston:, Machined of C 96300 Low Lead Brass, Seals:, EPDM, Seal Lubricant:, Dow-Corning Silicone Compound #111, FDA listed for use in potable water systems, Nickel Plated:, For Salt Water Application
E0260.jpg3/4" NPT Union Thermostatic Mixing Valve
Locke Part #: E0261MFG Part #: 34A214T Compare
Dual purpose mixing or diverting valves, Constant water temperature under changing operating conditionsReliable at minimum flow of 0.5 gpm, Nickel-plated brass construction, EPDM O-rings, Straight through design (hot and cold at the same level), Max pressure 150 psi (1034 kPa), Max temperature 212 F (100 C), Tamper resistant design, Valve trapping not required, ASSE, CSA and IAPMO listed
C0187.jpg3/4" or smaller supply
Locke Part #: C0187MFG Part #: 45-1412 Compare
Genuine renewal parts
E0260.jpg3/4" PEX Union Thermostatic Mixing Valve
Locke Part #: E0262MFG Part #: 34BLF214X Compare
Dual purpose mixing or diverting valves, Constant water temperature under changing operating conditionsReliable at minimum flow of 0.5 gpm, Nickel-plated brass construction, EPDM O-rings, Straight through design (hot and cold at the same level), Max pressure 150 psi (1034 kPa), Max temperature 212 F (100 C), Tamper resistant design, Valve trapping not required, ASSE, CSA and IAPMO listed
E0375.jpg3/4" PEX x 3/4" FIP Swivel. 18"
Locke Part #: E1699MFG Part #: 633x18 Compare
Brass FIP swivel nut includes EPDM gasket
E1168.jpg3/4" Pex x Pex Ball Valve / Relief Valve
Locke Part #: E1168MFG Part #: 78RV996125 / N55601 Compare
Pressure Rated: 400psi. Relief Valve, Pressure Settings: 75, 80, 100 or 125psi.
M1015.jpg3/4" Pressure Breaker
Locke Part #: M1015MFG Part #: 0792011 Compare
M1708.jpg3/4" Pressure Vacuum Breaker Assembly
Locke Part #: M1709MFG Part #: 720A 3/4" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg3/4" Reduced Pressure Backflow Preventer
Locke Part #: M1000MFG Part #: 0065372 Compare
E0579.jpg3/4" Relief valve,150 lb.
Locke Part #: E0579MFG Part #: 14737-0150 Compare
Can be used on Rinnai & other tankless water heaters. ASME rated, design certified by AGA; CGA listed. NPT male inlet x NPT female (drain) outlet. Pressure range: 150 psi. Standard setting.
M4505.jpg3/4" Rubber Gaskets / Washers
Locke Part #: M4510MFG Part #: 4124050 Compare
E0102.jpg3/4" Shank T&P Valve
Locke Part #: E0102MFG Part #: 19783-0150 Compare
Thermostat has a thermobonded protective coating. This feature retards the accumulation of mineral deposits. A.S.M.E. rated, self-closing T&P relief valves for water heaters up to 100,000 BTU/hr.
BLF9102.jpg3/4" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1173MFG Part #: 77FLF20401 3/4" Compare
Item: M1173, Size (in): 3/4, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
E0047.jpg3/4" Sweat
Locke Part #: E0047MFG Part #: 24502-000 Compare
E1130.jpg3/4" Sweat
Locke Part #: E1130MFG Part #: 50413W Compare
Eliminating leak paths in the system, Shortening installation times, Exclusive purge & drain feature, 600 WOG 150 WSP, Prevents electrolysis and eliminates galvanic corrosion, Includes mounting bolts, nuts and an additional wing style T handle, Allows virtually no air into the system upon pump replacement, Fits most circulator pumps, Adjustable packing gland for lifetime protection, Threaded ends comply with ANSI B1.20.1, Solder ends comply with ANSI B16.18, Hose threads comply with B1.20.7, Quick quarter turn ball valve
M1514.jpg3/4" Swing Check Valve C x C
Locke Part #: M1515MFG Part #: 521C04LF Compare
200 lb. pressure for water, oil or air. Cast Brass. Main use is to prevent backflow of fluids. C x C
M0514.jpg3/4" Swing Check Valve IPS
Locke Part #: M0515MFG Part #: M515 LF Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
E0096.jpg3/4" T&P Valve
Locke Part #: E0096MFG Part #: 16935-0150 Compare
E0100.jpg3/4" T&P Valve With 3" Probe,125 psi; Schools & Gov.
Locke Part #: E0101MFG Part #: 15914-0125 Compare
E0100.jpg3/4" T&P Valve With 3/4" Probe, 150 psi
Locke Part #: E0103MFG Part #: 16372-0150 Compare
E0100.jpg3/4" T&P Valve With 4" Probe, 150 psi Resident.
Locke Part #: E0100MFG Part #: 15836-0150 Compare
Product Image Not Available3/4" T & P Nipple Extender, 2" Total Long
Locke Part #: E0485MFG Part #: 229-19100-00 Compare
Size: 3/4", Length: 2"
Size: 3/4", Capacity: 105000 BTU/hr, Temperature: 210°F, Pressure Set Point: 150 psi, Stem: 4", Thread Type: Female
E0050.jpg3/4" Tempering Valve
Locke Part #: E0051MFG Part #: 0559136 Compare
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
E0047.jpg3/4" Threaded
Locke Part #: E0097MFG Part #: 24511-0000 Compare
M0999.jpg3/4" Total rubber parts kit for M1000
Locke Part #: M1132MFG Part #: 0887787 Compare
E0083.jpg3/4" Vacuum relief
Locke Part #: E0083MFG Part #: 0556031 Compare
M0546.jpg3/4" Water Press. Reduc. Valve
Locke Part #: M0546MFG Part #: 0009478 Compare
Set at 45 lb. Reduces water pressure in service lines.
M1692.jpg3/4" Water Pressure Reducing Valve
Locke Part #: M1693MFG Part #: 70 XL 3/4" Compare
M1030.jpg3/4" Wye Strainer Kit with Nipple
Locke Part #: M1031MFG Part #: 0379112 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M4565.jpg3/4" x 1" Coupling CTS x MIP
Locke Part #: M4564MFG Part #: 74141-195 Compare
F0580.jpg3/4" x 3" Dielectric Nipple
Locke Part #: F0580MFG Part #: 1995C Compare
F0790.jpg3/4" x 3" I.P. 1 Bolt Style
Locke Part #: F0791MFG Part #: 330-043 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
F0790.jpg3/4" x 6" I.P. 2 Bolt Style
Locke Part #: F0826MFG Part #: 330-046 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
Length (in): 12, Item: E0371, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 15, Item: E0372, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 18, Item: E0373, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 24, Item: E0374, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 18, Item: E0376, End Connection Size: 3/4” FIP x 7/8” Copper Sweat, Temperature Rating: 35° - 250° F, ID (in): 3/4, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 24, Item: E0377, End Connection Size: 3/4” FIP x 7/8” Copper Sweat, Temperature Rating: 35° - 250° F, ID (in): 3/4, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length: 18", Connections: 1″ FIP x 7/8″ O.D
Literature_HeaderImage-1-2000x550_c.jpg3/4 EVAPORATIVE COOLER VALVE
Locke Part #: M0485MFG Part #: 102-194 Compare
3/4" hose thread inlet & outlet. 1/8" female pipe thread side tap to A/C.
M1405.jpg3/4 IPS White Escutcheon
Locke Part #: M1438MFG Part #: 921-3W Compare
White Plastic, Shallow.
M1405.jpg3/4 Nominal White Escutcheon
Locke Part #: M1432MFG Part #: 920-3W Compare
White Plastic, Shallow.
WB00-12N.jpg3/4FIP X 3/4FIP X12 COPPER WHC
Locke Part #: L0958MFG Part #: WB00-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
WB07-18.jpg3/4FIP X 3/4PEX X18 COPPER WHC
Locke Part #: L0008MFG Part #: WB07-18 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 18, Quantity: 25, Weight (LBS): 20.1 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection
WB07-24_STD.jpg3/4FIP X 3/4PEX X24 COPPER WHC
Locke Part #: L0006MFG Part #: WB07-24 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 24, Quantity: 25, Weight (LBS): 16.5 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection
WB034-12N.jpg3/4FIP X3/4NOM M/FSWT X12 CPR
Locke Part #: L0009MFG Part #: WB034-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
WB034-18N.jpg3/4FIP X3/4NOM M/FSWT X18 CPR
Locke Part #: L0011MFG Part #: WB034-18N Compare
Size: 7/8” OD X 18” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
WB034-24N.jpg3/4FIP X3/4NOM M/FSWT X24 CPR
Locke Part #: L0012MFG Part #: WB034-24N Compare
Size: 7/8” OD X 24” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
M15.jpg3/8" Chrome Plated Escutcheon
Locke Part #: M0015MFG Part #: M15-2000PCS Compare
M660.jpg3/8" Closet Supply
Locke Part #: M0661MFG Part #: W442 Compare
Step design cone washer for 3/8" lavatory & sink supply.
S1-12DW F_STD.jpg3/8" COMP X 3/8" COMP 12" DWSH
Locke Part #: B0209MFG Part #: S1-12DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only
S1-16DL F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0289MFG Part #: S1-16DL F Compare
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, 100% No Lead, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, For use in potable water distribution systems in accessible locations only, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections
B0323.jpg3/8" comp. x 3/8" FIP.
Locke Part #: B0323MFG Part #: 114-102NL Compare
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
BLF9101.jpg3/8" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1161MFG Part #: 77FLF10201 3/8" Compare
Item: M1161, Size (in): 3/8, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Product Image Not Available3/8" L Beveled Faucet 100 Pack
Locke Part #: M1615MFG Part #: W236 Compare
M660.jpg3/8" Sink & Lavatory
Locke Part #: M0660MFG Part #: W443 Compare
Step design cone washer for 3/8" lavatory & sink supply.
B0253.jpg3/8" x 20" Chrome Plated
Locke Part #: B0254MFG Part #: 283-S04120C00 Compare
Lavatory & basin riser with nosepiece.
B0250.jpg3/8" x 20" Supply Tube
Locke Part #: B0250MFG Part #: 283-T25120C00 Compare
Rubber cone. Chrome Plated
B0253.jpg3/8" x 30" Chrome Plated
Locke Part #: B0257MFG Part #: 283-S04130C50 Compare
Lavatory & basin riser with nosepiece.
d0352.jpg3/8” x 24" Riser
Locke Part #: D0352MFG Part #: 000372-40 Compare
For D0312 & D0313
S1-16DW F_STD.jpg3/8 CMP X 3/8 CMP X 16" DISH
Locke Part #: B0210MFG Part #: S1-16DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only
S1-20DW F_STD.jpg3/8 CMP X 3/8 CMP X 20" DISH
Locke Part #: B0211MFG Part #: S1-20DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only
Size: 3/8" Large, Packaging: 100 per box, Outside Diameter: 11/16”
M1730.jpg3/8 OD Female Comp Tee Lead Free
Locke Part #: M1731MFG Part #: 660-GTR1B Compare
Size: 3/8” O.D. Female Captive Nut x 3/8” O.D. Compression x 1/4” O.D. Compression, Operating Temperature: 40°- 180°F at Maximum Operating Pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, For use with instrumentation, hydraulic and pneumatic systems., Compliant to California, Vermont and Maryland low-lead requirements, Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing,, Compliant product CSA approved to California Health & Safety Code 116875,Vermont Bill S.152 and Maryland House Bill 372 (Project # 234795)
Size: 3/8” O.D. Female Captive Nut x 3/8” O.D. Compression x 3/8” O.D. Compression, Operating Temperature: 40°- 180°F at Maximum Operating Pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, For use with instrumentation, hydraulic and pneumatic systems., Compliant to California, Vermont and Maryland low-lead requirements, Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing,, Compliant product CSA approved to California Health & Safety Code 116875,Vermont Bill S.152 and Maryland House Bill 372 (Project # 234795)
T119.jpg3’ Extension Hose, Fits T0113
Locke Part #: T0121MFG Part #: 274038 Compare
P-1610.jpg3” J-Hook with Nail
Locke Part #: M1442MFG Part #: 33742 Compare
Case Quantity: 100, Item: M1442, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
p54200.jpg3-1/2" Brass Plug For Extension Cover 3-7/8" OD
Locke Part #: G0265MFG Part #: P54-350 Compare
Size: 3-1/2", Outer Dimension: 3-7/8" Countersunk plug tapped 1/4-20, Stainless Steel
C0226.jpg3-1/2" Closet Bolts; 1 pair
Locke Part #: C0228MFG Part #: 427-PB Compare
These Waste Valves Are Used On Scullery Type Sinks. They Eliminate Getting Your Hands In The Water To Drain The Sink Bowls. This Provides Safety From Burns And Chemicals.
d0298.jpg3-1/2" x 2" Outlet Twist Lever Sink Waste Valve
Locke Part #: D0299MFG Part #: B-3952 Compare
These Waste Valves Are Used On Scullery Type Sinks. They Eliminate Getting Your Hands In The Water To Drain The Sink Bowls. This Provides Safety From Burns And Chemicals.
M674.jpg3-1/4" x 2-1/4" Solid Tank-to-Bowl Gasket
Locke Part #: M0703MFG Part #: 2096 Compare
Description Ext.: F/ PUSH ON SPRAY HOSE, Pricing Category: ADPT, Stock or OAN: s, DELTA FAUCET Model Number: RP13938, DELTA FAUCET Description: Delta: O-Ring, Case Quantity: 1, Series: Other
M0002.jpg3.5" x 18" 16 Gauge 16 Hole
Locke Part #: M1299MFG Part #: PS1816-3.5 Compare
Extra long protection of mechanical runs., Heavy steel
D138.jpg32" x 21" For Cast Iron Sinks
Locke Part #: D0145MFG Part #: 1S4P2132 Compare
1-1/2" Radius.
D138.jpg32" x 21" For Steel Sinks
Locke Part #: D0140MFG Part #: 1S42132 Compare
1-1/2" Radius.
E0105.jpg3500W 240V
Locke Part #: E0112MFG Part #: 265-42545-12 Compare
For Flanged Elements:
E0807.jpg37C72U-706 LPG 1-3/8"
Locke Part #: E0809MFG Part #: 265-46182-01 Compare
E0807.jpg37C73U-704 NG 1-3/8"
Locke Part #: E0807MFG Part #: 265-46181-01 Compare
p54200.jpg4" Brass Plug For Extension Cover 4-1/2" OD
Locke Part #: G0266MFG Part #: P54400 Compare
Size: 4", Outer Dimension: 4-1/2" Countersunk plug tapped 1/4-20, Stainless Steel
T1500a.jpg4" Clean Seal Plug
Locke Part #: T1502MFG Part #: 271721 Compare
C0257.jpg4" Closet Spacer
Locke Part #: C0257MFG Part #: R383400 Compare
For floor & wall closet bowls. Eliminates the need to chip concrete. Break out for coupling adjustments on off-the-floor closet bowls.
M0435.jpg4" Lead Boot Flashing
Locke Part #: M0438MFG Part #: ECONOMY 4" Compare
C0237.jpg4" x 5" Copper Float Ball
Locke Part #: C0246MFG Part #: 142 Compare
M718.jpg4’ Washing Machine Hose
Locke Part #: M0717MFG Part #: 464 Compare
M0407.jpg4’ x 4’ Reddi-But Lead Pans
Locke Part #: M0407MFG Part #: 4# 4' X 4' Compare
4 lbs. per square ft.
M0407.jpg4’ x 6’ Reddi-But Lead Pans
Locke Part #: M0409MFG Part #: 4# 4' X 6' Compare
4 lbs. per square ft.
P-1610.jpg4” J-Hook with Nail
Locke Part #: M1443MFG Part #: 33743 Compare
Case Quantity: 75, Item: M1443, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
G0060.jpg4-3/8" x 1-1/4" Prime-Rite Trap Primer Valve
Locke Part #: G0060MFG Part #: 695-01 Compare
Dimensions: 4-3/8" x 1-1/4", Inlet: 1/2" NPT Male, Outlet: 1/2" NPT Female, Operating Range: 20 to 80 PSIG No Adjustment Required, Automatically Maintains a Constant Water Seal in Floor Drain Traps., Best for Use with Low Flow Fixtures, One Model for One to Four Drain Traps, Contains: No Springs, Diaphgrams, or plastic parts and uses #60 Mesh Stainless Steel Screen.
52102-MB.jpg4-Setting Shower Head, Chrome, 6/Case
Locke Part #: A0294MFG Part #: 52102-MB Compare
Finish: Chrome, Flow Rate: 2.50 gpm @ 80 psi, 9.5 L/min @ 550 kPa, Description Ext.: CHROME, Pricing Category: ALU2, Stock or OAN: s, DELTA FAUCET Model Number: 52102-MB, DELTA FAUCET Description: Delta: 4-Setting Shower Head, Case Quantity: 6, Series: Universal Showering Components Touch-Clean Spray Holes, Metal ball connector, 3 diameter spray face, Spray Settings - Full Body Spray, Fast Massage, Full Spray w/ Massage, Pause, Warranty:, Lifetime faucet and finish warranty
229-39625-25.jpg43-1/2" Dip Tube with 3" Nipple, Polypropylene
Locke Part #: E0874MFG Part #: 229-51230-21 Compare
Length: 43-1/2", Nipple Size: 3"
224-47776-06.jpg44" Magnesium Anode Rod with 2" Nipple
Locke Part #: E0409MFG Part #: 224-47776-06 Compare
Material: Magnesium, Length: 44"
M0523.jpg44 Chrome Flange for M0595
Locke Part #: M0895MFG Part #: 44 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
E0113.jpg4500W 240V
Locke Part #: E0056MFG Part #: 265-51328-07 Compare
Sand and Lime Fighter Element For Flanged Elements:
E0114.jpg4500W 240V
Locke Part #: E0115MFG Part #: 265-51333-09 Compare
For Flanged Elements:
Type: Ultra LWD, Qty: 6, Nominal Voltage: 240v, Min Tank Diameter: 15", Watts @ 240v: 4500w, Watts @ 208v: 3500w Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
Features, :, 1-3/8" thread screw-in style, For the State Industries manufactured Duron tank water heaters, Also used in Sears Duron tank water heaters
This 47mm faucet valve cartridge is a direct replacement for the American Standard Reliant + or Ceramix one handle faucets., This durable ceramic disc valve cartridge by American Standard, has 3 holes to accommodate volume and temperature mixing for a single control faucet.
M0449.jpg5" - 9" OD Pipe Roof Flashing
Locke Part #: M0450MFG Part #: 500-90 Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
M715.jpg5" Force Cup Plunger
Locke Part #: M0715MFG Part #: 57-0100 Compare
G0260.jpg5" Wall C.O. Cover
Locke Part #: G0260MFG Part #: 1842-C Compare
Size: 5" A = Pipe Size, 1-1/4", 1-1/2", 2", 5", 2-1/2", 3", 3-1/2", 4", 7", 5", Extension cover puts the finishing touches to wall clean-outs, and can be painted or papered to match wall. Wall mount - 24 gauge, stainless steel.
M0002.jpg5" x 18" 16 Gauge 8 Hole
Locke Part #: M1322MFG Part #: PS1816-5 8 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg5" x 8" 16 Gauge Boca 6 Hole
Locke Part #: M0005MFG Part #: PS 5816 Compare
Extra long protection of mechanical runs., Heavy steel
M0449.jpg5"-9" Red HI-Temp Flashing
Locke Part #: M2450MFG Part #: #6 SILICONE RED Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
C0219.jpg5/16" x 2-1/2" Closet Screws
Locke Part #: C0221MFG Part #: C221 Compare
C0222.jpg5/16" x 2-1/4" Bolts
Locke Part #: C0224MFG Part #: C224 Compare
C4010.jpg5/16" x 2-1/4" Bolts
Locke Part #: C4010MFG Part #: 73065 Compare
Toes on underside of the foot prevent movement after installation.
C4010.jpg5/16" x 3-1/2" Bolts
Locke Part #: C4011MFG Part #: 73070 Compare
Toes on underside of the foot prevent movement after installation.
M0719.jpg5/8" ID x 50’ Black Hose
Locke Part #: M0719MFG Part #: A220 Compare
M15.jpg5/8" OD for 1/2" Copper
Locke Part #: M0022MFG Part #: 168 Compare
M4531.jpg5/8" x 3/4" Meter,7" Height Basic Setter
Locke Part #: M4563MFG Part #: 74134-120 Compare
T Comp. or 3T Comp. - bottom inlet/outlet, Angle Ball Valve - top inlet, Meter Nut top outlet
WaterFlowMeter.jpg5/8" x 3/4" Water Meter Lead Free
Locke Part #: M4545MFG Part #: WM-75 5/8" X 3/4" Compare
Dimension: 5/8"x3/4", Weight (lbs): 4.25, Flow Rating (gpm): 20, Continuous Flow (gpm): 10, Normal Flow Range (gpm): 1-20, Low Flow (gpm @ > 97%): 1/4, Extended Low Flow (gpm @ > 95%): 1/8, Maximum Working Pressure (psi): 150, Maximum Working Temperature (°F): 105, Specific Displacement (revs/gallon): 56.4/1, Headloss at Maximum Flow Rate (psi): 6.5, Length (A ): 7.5", Width (B ): 3-13/16", Height Standard Register with lid (C ): 5-3/8", Height Bottom to Center Line (D): 1-5/8", Packed To Carton: 6, Carton Weight (lbs): 30 Hermetically sealed dry dial protected from the elements, won't discolor or fade, Proven multi-jet water meter design, Connections are external non-tapered meter threading (comes with Male NPT thread adapters), Integral strainer in measuring chamber protects measuring components from foreign debris., Tempered glass lens for continued readability., Hinged lens cover to protect lens and register from damage. Magnetic drive to eliminate potential leak point., Easy to read register display with large clear digits., Odometer measures in gallons up to 9,999,999(99,999,999 for WM150/200).
M720A.jpg5’ Universal Drain Hose
Locke Part #: M0720MFG Part #: J04016 Compare
Can be cut at any section to fit 3/4", 7/8" or 1" drain.
M718.jpg5’ Washing Machine Hose
Locke Part #: M0718MFG Part #: 465 Compare
M415.jpg5’ x 40’ Polyeth. Shower Liner
Locke Part #: M0417MFG Part #: 41626 Compare
Used for shower pans, floor drain flashings and concealed waterproofing. Accepted by FHA and HUD.
M0416.jpg5 Lb. Box of Lead Wool
Locke Part #: M0416MFG Part #: 5#BAG LEAD WOOL Compare
M0419.jpg5 Lb. Box of Oakum Rope
Locke Part #: M0419MFG Part #: 2898 Compare
27" cut lengths.
C0232.jpg5-1/2" lower lift wire
Locke Part #: C0233MFG Part #: 96 Compare
52635-PK.jpg5-Setting Touch-Clean Shower Head, Chrome, 6/Case
Locke Part #: A0398MFG Part #: 52636-PK Compare
Finish: Chrome, Flow Rate: 2.50 gpm @ 80 psi, 9.5 L/min @ 550 kPa, Description Ext.: CHROME, Pricing Category: ALU2, Stock or OAN: s, DELTA FAUCET Model Number: 52635-PK, DELTA FAUCET Description: Delta: 5-Setting Touch-Clean(R) Shower Head, Case Quantity: 6, Series: Universal Showering Components, Shower Head Length: 4-1/2", Spray Face Diameter: 3-1/2" Five-setting showerhead, Full Body Spray, Full Spray w/Massage, Massage Spray, Soft Drench Spray, Soft Drench w/Full Spray,, Touch-Clean spray holes, Standard Specifications:, Standard 1/2" pipe fitting, Warranty:, Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects, in material and workmanship, 5 Year Limited Warranty for usage in all industrial, commercial and business applications, Complies With:, ASME A112.18.1 / CSA B125.1
M0523.jpg51 Replacement key for M0595
Locke Part #: M0596MFG Part #: 51 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
M0523.jpg52 9" Key for M0595
Locke Part #: M0600MFG Part #: 52 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
229-39625-25.jpg55" Diptube with Heat Trap, 2" Nipple, Polypropylene
Locke Part #: E0886MFG Part #: 229-45031-01 Compare
Size: 1", Length: 55", Nipple Size: 2-1/2"
D0480.jpg55/64" Female Aerator
Locke Part #: D0480MFG Part #: 460FR Compare
55/64"-27" inside threads, for use on regular faucet with outside threads.
E0105.jpg5500W 240V
Locke Part #: E0107MFG Part #: 265-42544-11 Compare
For Flanged Elements:
E0113.jpg5500W 240V
Locke Part #: E0108MFG Part #: 265-42545-09 Compare
Sand and Lime Fighter Element For Flanged Elements:
Type: Ultra LWD, Qty: 12, Nominal Voltage: 240v, Min Tank Diameter: 15", Watts @ 240v: 5500w, Watts @ 208v: 4125w Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
p54200.jpg6" Brass Plug For Extension Cover 6-1/2" OD
Locke Part #: G0268MFG Part #: P54 600 Compare
Size: 6", Outer Dimension: 6-1/2" Countersunk plug tapped 1/4-20, Stainless Steel
R2121.jpg6" Diameter Lid for M0785
Locke Part #: R2121MFG Part #: A12523L Compare
Size: 6", Use With: D100T199-3N
M716.jpg6" Free Flo Force Cup
Locke Part #: M0716MFG Part #: 57-1005 Compare
Size: 6", Weight: 0.66 lbs, Finish: Brushed Nickel, Material: Nickel/Stainless Steel, Dimensions LxWxH (in): 19.88 x 15.15 x 11.22
Size: 6", Weight: 0.66 lbs, Finish: Polished Chrome, Material: Stainless Steel, Dimensions LxWxH (in): 13.78 x 24.8 x 12.4
Size: 6", Weight: 1.25 lbs, Finish: Oil Rubbed Bronze, Material: Metal
M0002.jpg6" x 12" 16 Gauge 12 Hole
Locke Part #: M5074MFG Part #: FPS1216-6 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg6" x 18" 16 Gauge 12 Hole
Locke Part #: M5075MFG Part #: FPS1816-6 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg6" x 6" 16 Gauge 12 Hole
Locke Part #: M5072MFG Part #: FPS0616-8 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg6" x 9" 16 Gauge 12 Hole
Locke Part #: M5073MFG Part #: FPS0916-8 Compare
Extra long protection of mechanical runs., Heavy steel
M415.jpg6’ x 50’ Polyeth. Shower Liner
Locke Part #: M0415MFG Part #: 41619 Compare
Used for shower pans, floor drain flashings and concealed waterproofing. Accepted by FHA and HUD.
G0240.jpg6-1/4" Diameter Replacement Grate
Locke Part #: G0240MFG Part #: 801-A Compare
Size: 6-1/4" Black poly floor drain. For 2" floor drain; 5-1/2" Hole center.
E0113.jpg6000W 208V No Gasket Included Order E0706
Locke Part #: E0173MFG Part #: 220-42543-03 Compare
Sand and Lime Fighter Element For Flanged Elements:
Length: 14.81", Volts: 208, Watts: 6000W
U495S-69-PK.jpg69" Stainless Steel Hose, Chrome, 6/Case
Locke Part #: A0449MFG Part #: U495S-69-PK Compare
Finish: Chrome, Description Ext.: F/HANDSHOWER, Pricing Category: ALU2, Stock or OAN: s, DELTA FAUCET Model Number: U495S-69-PK, DELTA FAUCET Description: Delta: 69" Stainless Steel Hose, Case Quantity: 6, Series: Universal Showering Components, Hose Length: 40-69" 69" stainless steel hose, One conical and one hex all-brass nut, Standard Specifications:, Stainless steel material spiraled over a rubber inner liner, Warranty:, Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free, from defects in material and workmanship, 5 Year Limited Warranty for usage in all industrial, commercial and business applications, Complies With:, ASME A112.18.1/CSA B125.1
G0260.jpg7" Wall C.O. Cover
Locke Part #: G0261MFG Part #: 1844-C Compare
Size: 7" A = Pipe Size, 1-1/4", 1-1/2", 2", 5", 2-1/2", 3", 3-1/2", 4", 7", 5", Extension cover puts the finishing touches to wall clean-outs, and can be painted or papered to match wall. Wall mount - 24 gauge, stainless steel.
M0719.jpg7/8" ID x 50’ Black Hose
Locke Part #: M0876MFG Part #: A218 Compare
M15.jpg7/8" OD for 3/4" Copper
Locke Part #: M0024MFG Part #: 169 Compare
Size: 7/8” OD X 18” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
Size: 7/8” OD X 24” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
Finish: Clean White Finish, Connector Length: 72", For: PEX, Copper, CPVC
Weight: 2.76 lb, Flow Rate: 0.25 GPM min @ 60 psi; 2.25 GPM max @ 60 psi, Pressure: 20 - 125 psi, Box Dimensions: 14 x 9 x 4, Temperature: 40°F - 140°F
Product Image Not Available8" Flue Damper Assembly
Locke Part #: E0399MFG Part #: 265-42974-00 Compare
Size: 8"
stem-extender-8-carded.jpg8" Gas Valve Stem Extender.
Locke Part #: M0479MFG Part #: BF.EX.CM Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 8" Stem Allows up to 8" of adjustment of log lighter
universal-gas-valve-key-8-polished-chrome.jpg8" Polished Chrome Gas Fireplace Key.
Locke Part #: M0474MFG Part #: NKY.8.01 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 8" Length Removable key insures you that the valve will not be turned on accidentally.
C0232.jpg8-1/2" upper lift wire
Locke Part #: C0232MFG Part #: 91 Compare
P-2021.jpg90° PEX Elbow for 1/2” and 3/8” Pex, Blue
Locke Part #: M1285MFG Part #: P-2021 Compare
Color: Blue, Case Quantity: 500, Item: M1285, UOM: EA PEX 90 elbow combines strength and ease of installation. Simply bend pipe and clip elbow into any 1-3/8 keyed-hole bracket., Versatility allows multiple elbows to be stacked and nailed to studs., Works with all brands of PEX in both 1/2 and 3/8 ., Meets Zurn bend specification for PEX piping., Made in the USA.
E1521.jpgAccessory Module Package
Locke Part #: E1521MFG Part #: 239-47872-00 Compare
M1910.jpgActivated Carbon Filter
Locke Part #: M1910MFG Part #: JBSAYR-FILTER Compare
Activated carbon filter that eliminates offensive odors from building vents and septic systems. The filter is easy to install and requires no special tools, permits, or certifications., Installs easily on existing pipes, Filter cartridge lasts up to 2-yrs
M1910.jpgActivated Carbon Replacement Filter for M1910
Locke Part #: M1911MFG Part #: JBSAFC-6 Compare
Activated carbon filter that eliminates offensive odors from building vents and septic systems. The filter is easy to install and requires no special tools, permits, or certifications., Installs easily on existing pipes, Filter cartridge lasts up to 2-yrs
D0295.jpgAdapter
Locke Part #: D0295MFG Part #: EZ-K Compare
For D0315, D0316 & D0352 To New Style Easy Install Prerinse Units And Faucets.
BCT015-H.jpgAdjustable Anti-Siphon Toilet Tank Fill Valve
Locke Part #: C0312MFG Part #: BCT015-H Compare
Replaces most old style fill valves, Adjusts from 9 to 14 inches in height, Features 1/4-turn height adjustment, Includes metal S clip, plastic refill tube, plastic lock nut, plastic fill valve connector nut, rubber cone washer, and rubber shank washer boxed
C0191.jpgAdjustable flapper
Locke Part #: C0191MFG Part #: 555CRP8 Compare
Adjustable timing cup for most efficient flush, Five-Year Warranty
D0483.jpgAerator/Sprayer
Locke Part #: D0483MFG Part #: AB83-0036 Compare
Double swivel ball joint tilts to rinse the entire sink surface.
Description Ext.: THREAD AER, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP330MBS, DELTA FAUCET Description: Delta: Aerator, Case Quantity: 60, Series: Other
M1928.jpgAir Admittance Valve
Locke Part #: M1928MFG Part #: JBSA-4 MAX Compare
Air Pressure Sensor.jpgAir Pressure Sensor (APS) for NPE Models
Locke Part #: E1434MFG Part #: 30010238A Compare
Air Pressure Sensor.jpgAir Pressure Sensor (APS) KDN-APS-02-D
Locke Part #: E1428MFG Part #: NASS9EX00009 Compare
D0240.jpgAlmond Assembly
Locke Part #: D0243MFG Part #: JBX122E Compare
Opella makes it simple for you to create a bold, new look for your kitchen sink with an easy to install upgrade for your waste disposer. Just choose one of the brilliant euro design colors to match & enhance your kitchen designs.
d0230.jpgAlmond Strain.
Locke Part #: D0233MFG Part #: JBC104 Compare
Celcon colors more than skin deep. Easily removed for cleaning. 3-1/2"
Packaging: Blister, Carton Qty: 5 Replaces American Standard No. 7301111-0070A, Engineered materials resist chlorine, Fits newer American Standard Champion 4 & Eljer, Titan 4 flush valves, Proven longest lasting, 5 year warranty
A2500.jpgAmerican Standard Tank-to-Bowl Gasket Kit
Locke Part #: A2500MFG Part #: 47060-07 Compare
OCR09X C_STD.jpgANG VAL 1/2 CMP X 1/4 CMP RIS
Locke Part #: B0239MFG Part #: OCR09X C Compare
Size: 1/2” Nom Compression x 1/4” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
SCR19X C_STD.jpgANG VAL 1/2 CMP X 3/8 CMP
Locke Part #: B0332MFG Part #: SCR19X C Compare
Size: 1/2” Nom compression x 3/8” OD compression with loose key, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Large loose key handle provides a secure grip for trouble-free on/off operation, Removable loose key handle helps protect against accidental stop operation during rough-ins, No Lead, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems, Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
OR17X C_STD.jpgANG VAL 1/2 FIP X 3/8 CMP RIS
Locke Part #: B0225MFG Part #: OR17X C Compare
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, Compliant Stops available for California and Vermont low-lead requirements, For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
OCR19X C_STD.jpgANG VAL 1/2 NOM CMP X 3/8 CMP
Locke Part #: B0226MFG Part #: OCR19X C Compare
Size: 1/2” Nom Compression x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
R19X C_STD.jpgANG VAL 1/2 SWT X 3/8 CMP RIS
Locke Part #: B0231MFG Part #: R19X C Compare
Size: 1/2” Nom Sweat x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, No Lead, For use with water in accessible locations only., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
KTCR19X C1_STD.jpgANG VLV 1/2 NOM CMP X 3/8 OD
Locke Part #: B0237MFG Part #: KTCR19X C Compare
Size: 1/2” Nom. Compression x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance o-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability and long-lasting performance, Blow-out proof brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% leak tested, Compliant KT Stops available for California and Vermont low-lead requirements, For use in potable water distribution systems
B0325.jpgAngle Stop 3/8" OD Comp. x 5/8" OD Comp.
Locke Part #: B0331MFG Part #: 114-104NL Compare
B0325.jpgAngle stop 3/8" OD Compression x 1/2" IPS
Locke Part #: B0325MFG Part #: 114-103NL Compare
B0339.jpgAngle stop 3/8" OD Compression x 1/2" PEX
Locke Part #: B0339MFG Part #: 114-109NL Compare
B0325.jpgAngle Stop 5/8" OD Comp. x 3/8" OD Comp.
Locke Part #: B0379MFG Part #: 114-604NL Compare
224-47776-06.jpgAnode Rod with 3" x 3/4" Nipple, 39" Length
Locke Part #: E0864MFG Part #: 224-49560-08 Compare
Length: 39", Nipple Size: 3" x 3/4"
Style: WH9, Qty: 6, Application Voltage: 240/208/120 Features, :, Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed
Style: WH9, Qty: 6, Application Voltage: 240/208/120 Features, :, Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed
Style: WH10A, Qty: 6, Application Voltage: 240/208/120 Features, :, Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed
Product Image Not AvailableASME Commercial Electric Element Gasket
Locke Part #: E1128MFG Part #: 223-42016-00 Compare
233-41347-00.jpgAssembly Thermostat Board, for Use with D80, D100 Models
Locke Part #: E0402MFG Part #: 233-41347-00 Compare
Use With: D80, D100
M0861.jpgAssorted Beveled Washers
Locke Part #: M0861MFG Part #: W292B Compare
d0346.jpgB1100 Repair Kit
Locke Part #: D0346MFG Part #: B-20K Compare
Contains:, Spindle, Seat Screw, Bonnet Washer, S/S Bonnet Washer, Bonnet Washer, Swing Nozzle, Washer Seat, Dome Packing, RH 000800-25, LH 00801-25, 000933-45, 000986-45, 002726-45, 001047-45, 001074-45, 001092-45, 001099-45, (1), (4), (2), (2), (4), Application:, B1100 Series
d0345.jpgB1100 Spindle Kit
Locke Part #: D0345MFG Part #: B-12K Compare
Contains:, Spindle RH 000800-25 (1), Spindle LH 00801-25 (1), Screw 000933-45 (2), Washer Seat 001092-45 (2), Application:, B1100 Spindle
Color: Dark Green, Weight: 50 lb, Series: B42R, Standards: ASTM A-126, AISI C1010, Inlet Size: 1-1/4 inch, Maximum Pressure: 20 psig, Maximum Temperature: -20 to 150 Deg F, Pressure Adjustment Range: 6 to 16 inch WC, Body Material: High Tensile Strength Cast Iron, Outlet Pressure Range: 4 - 9" w.c., Orifice Size (inches): 1/2 x 9/16, K-Factor: 416, Maximum Allowable Operating Pressure (MAOP): 10 PSIG, Emergency Inlet Pressure (PSIG): 40, Emergency Outlet Pressure (PSIG) Containment++: 30, Emergency Outlet Pressure (PSIG) No Damage++: 60 The B42 is a spring loaded self-operated regulator with internal relief option, The B42 features a molded diaphragm, 6:1 lever ratio and one inch vent., Max BTU Capacity: 3,800 scfh, Available in 1/2 in. through 1-1/4 in. connection, Compact size, Plated steel diaphragm plate, Stainless steel lever pin, One piece molded Buna-N valve seat, Interchangeable aluminum orifice, Spring loaded internal relief valve, 12.6 sq. in. of diaphragm area
Color: Dark Green, Weight: 49 lb, Series: B42R, Standards: ASTM A-126, AISI C1010, Inlet Size: 1 inch, Maximum Pressure: 20 psig, Maximum Temperature: -20 to 150 Deg F, Pressure Adjustment Range: 6 to 16 inch WC, Body Material: High Tensile Strength Cast Iron, Outlet Pressure Range: 4 - 9" w.c., Orifice Size (inches): 1/2 x 9/16, K-Factor: 416, Maximum Allowable Operating Pressure (MAOP): 10 PSIG, Emergency Inlet Pressure (PSIG): 40, Emergency Outlet Pressure (PSIG) Containment++: 30, Emergency Outlet Pressure (PSIG) No Damage++: 60 The B42 is a spring loaded self-operated regulator with internal relief option, The B42 features a molded diaphragm, 6:1 lever ratio and one inch vent., Max BTU Capacity: 3,800 scfh, Available in 1/2 in. through 1-1/4 in. connection, Compact size, Plated steel diaphragm plate, Stainless steel lever pin, One piece molded Buna-N valve seat, Interchangeable aluminum orifice, Spring loaded internal relief valve, 12.6 sq. in. of diaphragm area
Color: Dark Green, Weight: 48 lb, Series: B42R, Standards: ASTM A-126, AISI C1010, Inlet Size: 3/4 inch, Maximum Pressure: 20 psig, Maximum Temperature: -20 to 150 Deg F, Pressure Adjustment Range: 6 to 16 inch WC, Body Material: High Tensile Strength Cast Iron, Outlet Pressure Range: 4 - 9" w.c., Orifice Size (inches): 1/2 x 9/16, K-Factor: 416, Maximum Allowable Operating Pressure (MAOP): 10 PSIG, Emergency Inlet Pressure (PSIG): 40, Emergency Outlet Pressure (PSIG) Containment++: 30, Emergency Outlet Pressure (PSIG) No Damage++: 60 The B42 is a spring loaded self-operated regulator with internal relief option, The B42 features a molded diaphragm, 6:1 lever ratio and one inch vent., Max BTU Capacity: 3,800 scfh, Available in 1/2 in. through 1-1/4 in. connection, Compact size, Plated steel diaphragm plate, Stainless steel lever pin, One piece molded Buna-N valve seat, Interchangeable aluminum orifice, Spring loaded internal relief valve, 12.6 sq. in. of diaphragm area
Description Ext.: HNDLE, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP212MBS, DELTA FAUCET Description: Delta: Ball Assembly - Stainless Steel - Knob Handle, Case Quantity: 60, Series: Other
Description Ext.: SNG L, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP70MBS, DELTA FAUCET Description: Delta: Ball Assembly - Stainless Steel - Lever Handle, Case Quantity: 60, Series: Other
A1083.jpgBall Assembly for A0530, A0531 & B0500
Locke Part #: A1083MFG Part #: 4004 Compare
C0286.jpgBallcock Repair Kit
Locke Part #: C0286MFG Part #: AMERIKIT Compare
Ceramic disc valving, Hot limit safety stop, Reliable performance, For use on American Standard shower faucets
Finish: Chrome, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: RP33805, DELTA FAUCET Description: Delta: Horizontal Rod, Case Quantity: 1, Series: Other, Length: 10-1/8"
D0240.jpgBiscuit Assembly
Locke Part #: D0245MFG Part #: JBX121E Compare
Opella makes it simple for you to create a bold, new look for your kitchen sink with an easy to install upgrade for your waste disposer. Just choose one of the brilliant euro design colors to match & enhance your kitchen designs.
d0230.jpgBiscuit Strain.
Locke Part #: D0234MFG Part #: JBC103 Compare
Celcon colors more than skin deep. Easily removed for cleaning. 3-1/2"
D0240.jpgBlack Assembly
Locke Part #: D0241MFG Part #: JBX120E Compare
Opella makes it simple for you to create a bold, new look for your kitchen sink with an easy to install upgrade for your waste disposer. Just choose one of the brilliant euro design colors to match & enhance your kitchen designs.
d0484.jpgBlack Hose Guide
Locke Part #: D0485MFG Part #: 242-20 Compare
D0199.jpgBlack Plastic Stopper
Locke Part #: D0199MFG Part #: STP-PL Compare
Economy style black-color stopper that can be used in any sink.
D0486.jpgBlack Spray Head, Less Hose
Locke Part #: D0486MFG Part #: 88-422 Compare
Improved rinsing spray. Attaches to existing hose to replace any automatic thumb control sink spray. Fits any ledge or deck mount faucet.
D0486.jpgBlack Spray Head with 48" Hose
Locke Part #: D0487MFG Part #: 88-422-4 Compare
Improved rinsing spray. Attaches to existing hose to replace any automatic thumb control sink spray. Fits any ledge or deck mount faucet.
d0230.jpgBlack Strainer
Locke Part #: D0231MFG Part #: JBC102 Compare
Celcon colors more than skin deep. Easily removed for cleaning. 3-1/2"
1520-18.jpgBlack Wtr Mtr, 2 MsHl FCvr Cast Iron Reader
Locke Part #: R1084MFG Part #: 15201011 Compare
Color: Black, Weight: 15.3, Depth: 18 The 1520-18 body is a conveniently sized meter enclosure for the water market, The rugged 1520-18 is designed for maximum performance on a lightweight meter enclosure, The 1520-18 accepts standard 1419 covers, Lid seat collar for increased load capacity, One piece (18 ) body. No extension required, Enhanced interior volume, Full range of flush and T covers
1520-18.jpgBody Black 2 MsHl
Locke Part #: R1083MFG Part #: 15202002 Compare
Color: Black, Weight: 11.7, Depth: 18 The 1520-18 body is a conveniently sized meter enclosure for the water market, The rugged 1520-18 is designed for maximum performance on a lightweight meter enclosure, The 1520-18 accepts standard 1419 covers, Lid seat collar for increased load capacity, One piece (18 ) body. No extension required, Enhanced interior volume, Full range of flush and T covers
M0086.jpgBone/Nat. Touchup- Bootz Porc.
Locke Part #: M0087MFG Part #: AS-07 BONE Compare
White, ideal touch-up for appliance surfaces. For use on white enameled or porcelain finishes. Water & weather resistant, won't yellow. Dry to touch in 5-10 minutes, overnight to dry hard.
A0372.jpgBradley/Cole/Kohler Repair Kit
Locke Part #: A0372MFG Part #: 46-0001 Compare
M0008.jpgBrass 1-1/2" x 1-1/2" Slip Joint Nut
Locke Part #: M0014MFG Part #: 330-C Compare
Dependable and Quiet., Low cost, high quality ballcock., Long-life nylon valve seat., Operates equally well at high or low pressuresn Heavy Red Brass Casting., Cup Seal prevents squirting., Seamless Copper riser pipe.
63PT-4X.jpgBrass Insert For 1/4” OD Plastic Tubing
Locke Part #: M0036MFG Part #: 63PT-4 X Compare
Size: 1/4” OD Tube, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Available in a broad range of sizes and styles, Fitting does not require any flaring, soldering, or other type of tubing preparation, No Lead, For use in potable water, instrumentation, hydraulic, and pneumatic systems., For use with plastic tubing in potable water distribution systems. Not intended for use with non-plastic tubing.
d0318.jpgBrass Spray Valve
Locke Part #: D0318MFG Part #: B-0107 Compare
This Valve Is The Same As Used On Most Models Of The Pre-Rinse And Connects Directly To The Flexible Stainless Steel Hose Assembly.
E0044.jpgBrass Valve
Locke Part #: E0044MFG Part #: 265-42351-02 Compare
d0350.jpgBrush attachment
Locke Part #: D0350MFG Part #: BR10 Compare
Slips Over D0318 Spray Nozzle
t01330.jpgBrushed Nickel Universal Tank Trip Lever
Locke Part #: C3201MFG Part #: T0133BN Compare
Finish: Brushed Nickel Can be used as a front mount or side mount, 8" Adjustable arm
Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP17446, DELTA FAUCET Description: Delta: Button - Single Handle Lavatory, Tub And Shower, Case Quantity: 12, Series: Other, Attribute: Carded Parts
RP18373.jpgButton Set for use with Two-Handle Knobs
Locke Part #: A0621MFG Part #: RP18373 Compare
Description Ext.: CHROME, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP18373, DELTA FAUCET Description: Delta: Button Set, Series: Other, Attribute: Carded Parts
C1824.jpgCadet 3 3" Flapper Assembly
Locke Part #: C1824MFG Part #: 738920-007A Compare
C1823.jpgCadet 3 White Trip Lever
Locke Part #: C1823MFG Part #: 738903-0200A Compare
RP188MBS.jpgCam Assembly - Knob Handle, 64/Case
Locke Part #: A0713MFG Part #: RP188MBS Compare
Description Ext.: SNG LEVR, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP188MBS, DELTA FAUCET Description: Delta: Cam Assembly - Knob Handle, Case Quantity: 64, Series: Other
RP61MBS.jpgCam Assembly - Lever Handle, 64/Case
Locke Part #: A0751MFG Part #: RP61MBS Compare
Description Ext.: NEW LEVER HNDL FCT., Pricing Category: ADPT, Stock or OAN: s, DELTA FAUCET Model Number: RP61MBS, DELTA FAUCET Description: Delta: Cam Assembly - Lever Handle, Case Quantity: 64, Series: Other
C0675.jpgCap assembly for PRO45 and PRO45B
Locke Part #: C0675MFG Part #: 0 3966145200 9 Compare
Ultra-quiet operation. Minimal water hammer. Code approved. 5 Year Warranty.
Finish: Chrome, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP50, DELTA FAUCET Description: Delta: Cap Assembly With Adjusting Ring, Case Quantity: 12, Series: Other, Attribute: Carded Parts
RP54269.jpgCap with O-Ring
Locke Part #: A0581MFG Part #: RP54269 Compare
Description Ext.: F/ NEW STYLE SPRAYER, Pricing Category: ADPT, Stock or OAN: s, DELTA FAUCET Model Number: RP54269, DELTA FAUCET Description: Delta: Cap With O-Ring, Series: Other
A2390.jpgCartridge
Locke Part #: A2390MFG Part #: PB-1745 Compare
RP32104.jpgCartridge Assembly - Monitor 17 Series, 3/Case
Locke Part #: A0316MFG Part #: RP32104 OEM DELTA Compare
Description Ext.: SERIES, Pricing Category: ADP1, Stock or OAN: s, DELTA FAUCET Model Number: RP32104, DELTA FAUCET Description: Delta: Cartridge Assembly - Monitor(R) 17 Series, Case Quantity: 3, Series: Other
Model - RP46074.jpgCartridge Assembly - MultiChoice 13/14 Series, 3/Case
Locke Part #: A1912MFG Part #: RPB46074/ SLD1327M Compare
Pricing Category: ADP1, Stock or OAN: s, DELTA FAUCET Model Number: RP46074, DELTA FAUCET Description: Delta: Cartridge Assembly - Multichoice(R) 13/14 Series, Case Quantity: 3, Series: Other
Model - RP46463.jpgCartridge Assembly - MultiChoice 17 Series, 3/Case
Locke Part #: A1913MFG Part #: RPB46463 Compare
Pricing Category: ADP1, Stock or OAN: s, DELTA FAUCET Model Number: RP46463, DELTA FAUCET Description: Delta: Cartridge Assembly - Multichoice(R) 17 Series, Case Quantity: 3, Series: Other
RP19804.jpgCartridge Assembly for 1300 / 1400 Series Faucets
Locke Part #: A0703MFG Part #: RP19804 OEM DELTA Compare
Description Ext.: SERIES, Pricing Category: ADP1, Stock or OAN: s, DELTA FAUCET Model Number: RP19804, DELTA FAUCET Description: Delta: Cartridge Assembly, Series: Other, Attribute: Carded Parts
A1084.jpgCartridge Kit for B0233 & B0234
Locke Part #: A1084MFG Part #: 50743N-30 Compare
A1084.jpgCartridge Kit for B1233, B1234 & B0245
Locke Part #: A1085MFG Part #: 50706N-30 Compare
LRP_CBBP-38_side.jpgCBBP,3/8",4C SER
Locke Part #: M1400MFG Part #: 4C10201 Compare
C1822.jpgChampion 4 Chrome Trip Lever
Locke Part #: C1822MFG Part #: 738995-0020A Compare
C1820.jpgChampion 4 flush valve seal kit
Locke Part #: C1820MFG Part #: 7301111-0070A Compare
Includes O-ring and gasket
B0391.jpgChrome
Locke Part #: B0389MFG Part #: 759PB-3 Compare
C0169.jpgChrome
Locke Part #: C0169MFG Part #: 60-7217 Compare
For ELJER Old Emblem Closets
C0170.jpgChrome
Locke Part #: C0170MFG Part #: 60-2704 Compare
For ELJER Old Emblem Closets
A0524.jpgChrome 6" shower head
Locke Part #: A0524MFG Part #: S1213600CP Compare
23.jpgChrome 6 setting shower-head
Locke Part #: A0442MFG Part #: 51261300CP Compare
A0438.jpgChrome Bath Supply
Locke Part #: A0438MFG Part #: B49021 Compare
For leg tubs. Chrome plated finish, 3/16" OD annealed tube, complete with nuts, washers & escutcheons., 3/16"
A0533.jpgChrome hand held 3 way
Locke Part #: A0533MFG Part #: S01023CP Compare
Finish: Chrome Plated, Qty: 12, Catalog Sequence: 2, Wt: 7 Lbs
40.jpgChrome Plated Left Hand Trip Lever
Locke Part #: C0209MFG Part #: 40CH-P-20 Compare
Material: Plastic, Color/Finish: Chrome Plated Left hand trip lever fits model 160, 161, 170, 171, 180, Profit1, Proft2 and Profit3, Front Mount, Right hand trip lever fits model right hand Alto tanks, Made in USA
Color/Finish: Chrome Plated Chrome Plated Left Hand Trip Lever, Fits model 51 Mansfield tanks, Front Mount, Includes locknut
C1150.jpgChrome Plated Lever
Locke Part #: C1150MFG Part #: 60-9404 Compare
40.jpgChrome Plated Right Hand Trip Lever
Locke Part #: C0205MFG Part #: 40RHCH Compare
Material: Plastic, Color/Finish: Chrome Plated Left hand trip lever fits model 160, 161, 170, 171, 180, Profit1, Proft2 and Profit3, Front Mount, Right hand trip lever fits model right hand Alto tanks, Made in USA
C0243.jpgChrome Plated Tank Lever
Locke Part #: C0243MFG Part #: C243 Compare
C0244.jpgChrome Plated Tank Lever, Zinc Spud & Nut
Locke Part #: C0244MFG Part #: 119 Compare
8" Brass Arm, Metal Spud and Nut
t01330.jpgChrome Plated Universal Tank Trip Lever
Locke Part #: C3200MFG Part #: T01330 Compare
Finish: Chrome Can be used as a front mount or side mount, 8" Adjustable arm
48.jpgChrome Push Button Trip Lever
Locke Part #: C0179MFG Part #: 48CH Compare
Color/Finish: Chrome Chrome Metal Push Button Actuator, Side Mount, Square Actuator, Durable, zinc die-cast construction, Includes locknut
A0437.jpgChrome Shower arm flange
Locke Part #: A0437MFG Part #: 695 Compare
Chrome plated with set screw. 1/2" Arm size.
A0526.jpgChrome shower head
Locke Part #: A0526MFG Part #: G01031CP Compare
C0540.jpgChrome Tank Lever
Locke Part #: C0541MFG Part #: 684 Compare
Designer finish handles. Fit most front, side or angle mount tanks. 3 year warranty. (Pictured: Oil Rubbed Bronze)
54435-PK.jpgClassic Shower Mount Hand Shower, Chrome, 6/Case
Locke Part #: A0394MFG Part #: 54434-20-PK Compare
Finish: Chrome, Flow Rate: 2.50 gpm @ 80 psi, 9.5 L/min @ 550 kPa, Description Ext.: CHROME, Pricing Category: ALU2, Stock or OAN: s, DELTA FAUCET Model Number: 54435-PK, DELTA FAUCET Description: Delta: Shower Mount Hand Shower, Case Quantity: 6, Series: Universal Showering Components Five-setting handshower, Touch-Clean spray holes, 28" Shower arm mount, Shower arm mount, Shower arm and flange NOT included, 60" UltraFlex hose, 60"-82" (1524 mm - 2083 mm) Stretchable Metal Hose w/Vacuum Breaker, Full Body Spray, Full Spray w/Massage, Fast Massage, Soft Drench Spray, Shampoo Rinsing Spray, Full Body Spray, Full Spray w/Massage, Fast Massage, Soft Drench Spray, Shampoo Rinsing Spray, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes: or, for commercial users, for 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase. No warranty is provided on batteries, Complies with:, ASME A112.18.1/CSA B125.1
B0377.jpgCold Button
Locke Part #: B0368MFG Part #: 99-5231 HOT Compare
For Sink, Lavatory, and Tub/Shower.
A1058.jpgCold button for A0551
Locke Part #: A1063MFG Part #: A0073CP Compare
011278-25.jpgCold Cartridge Assembly, Ceramic, Includes Bonnet
Locke Part #: D0218MFG Part #: 011279-25 Compare
Finish: Ceramic, Material: Ceramic, Overall Height: 3"
d0215.jpgCold Ceramic No Bonnet
Locke Part #: D0216MFG Part #: 011277-45 Compare
d0215.jpgCold Ceramic With Bonnet And Spring Check
Locke Part #: D0220MFG Part #: 012395-25 Compare
E0027.jpgCold Control
Locke Part #: E0027MFG Part #: 31513C Compare
This item will fit any, ELKAY, model water cooler stocked by Locke Supply Co.
A2230.jpgCold Stem with Barrel
Locke Part #: A2230MFG Part #: 22-1235C COLD Compare
A2364.jpgCold Stem with Seat
Locke Part #: A2364MFG Part #: AB11-4110C Compare
A2366.jpgCold Stem with Seat
Locke Part #: A2366MFG Part #: 11-4200C Compare
A2368.jpgCold Stem with Seat
Locke Part #: A2368MFG Part #: AB11-4300C Compare
ssppp.jpgCold Valve Unit
Locke Part #: A2233MFG Part #: AB11-0975 C Compare
Easy to operate lever handle, Durable metal construction, Easy to install, Check your repair parts information for compatibility Metal lever handle, One handle, For two and three handle bath and bath/shower faucets, Includes handle screw M918075, Polished chrome finish
C1831.jpgColony Trip Lever
Locke Part #: C1831MFG Part #: 7381004-0200A Compare
E1518.jpgCommercial Water Heater Temp Display
Locke Part #: E1518MFG Part #: 233-46557-00 Compare
C0323.jpgComplete Repair Kit
Locke Part #: C0323MFG Part #: 0 39961 45400 3 Compare
Fits most 2 and 3-bolt tanks., Contains: Flush Valve with Adjust-A-Flush Flapper, 400A Fill Valve, Sure-Fit Chrome Tank Lever, 3 Bolts and Gasket., 400A Fill Valve saves water, signals leaks., Sure-Fit Chrome Tank Lever trims/bends to fit; no pre-measuring needed, Flush Valve ends leaks at the tank drain., Adjust-A-Flush Flapper dials to adjust water volume for a custom flush.
RP20111.jpgConversion Ball, 1/Case
Locke Part #: A0313MFG Part #: RP20111 Compare
Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP20111, DELTA FAUCET Description: Delta: Conversion Ball, Case Quantity: 1, Series: Other
Size: 3/8” OD x 72” long slip tube, Finish: Chrome Plated, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece construction, 100% Compliant product, For use in potable water distribution in accessible locations only.
D0195.jpgCord Accessory Kit
Locke Part #: D0195MFG Part #: CRD-00 Compare
Size: 1/2” Nom. CPVC x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, No lead, For use in potable water distribution systems., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
Size: 1/2” Nom. CPVC x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability and long-lasting performance, Oval knurled handle provides a secure grip and smooth on/off operation, Compliant Multi-Turn Stops available for California, Vermont and Maryland low-lead Requirements, For use in potable water distribution systems., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
R1701LRXC1.jpgD/O VAL 1/2"IP ANG VAL 3/8"OD
Locke Part #: B0315MFG Part #: R1701LRX C1 Compare
Size: 1/2” F.I.P. x 3/8” OD Compression x 3/8" OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability and long-lasting performance, Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, Compliant Stops available for California and Vermont no-lead requirements., For use in potable water distribution systems., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
CR1900LX C1_EXP.jpgD/O VLV 1/2 NOM 3/8 OD COMP 1/4 OD COMP
Locke Part #: B0326MFG Part #: CR1900LX C1 Compare
Size: 1/2" Nom compression x 3/8” OD compression x 1/4” OD compression (left side), Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance., Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle helps protect against accidental stop operation during rough-ins, 100% Compliant, For use in potable water distribution systems, Not intended for recirculating water systems that produce continuous use temperatures above 115 F
CR1900LX C1_EXP.jpgD/O VLV 1/2 NOM 3/8 OD COMP 1/4 OD COMP
Locke Part #: B0327MFG Part #: CR1900RX C1 Compare
Size: 1/2" Nom compression x 3/8” OD compression x 1/4” OD compression (left side), Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance., Knurled oval handle provides a secure grip and smooth on/off operation, Easy-to-remove handle helps protect against accidental stop operation during rough-ins, 100% Compliant, For use in potable water distribution systems, Not intended for recirculating water systems that produce continuous use temperatures above 115 F
CR1901DVSX R_STD.jpgD/O VLV 1/2 NOM CMP X 3/8 CMP X 3/8 CMP
Locke Part #: B0248MFG Part #: CR1901DVSX R Compare
Size: 1/2" Nom compression x 3/8” OD compression x 3/8” OD compression, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Independent flow control. Dual outlet, dual shut-off operation permits you to shut-off water flow to one fixture while maintaining water flow to another fixture, Code approved replacement where separate shut-offs are required for two lines, Knurled oval handle provides a secure grip and smooth on/off operation, Straight inlet to outlet design (same-side outlets) is great for installations in tight spaces, Machined one-piece brass body provides strength, durability, and long-lasting performance, For use with water in accessible locations only., Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% compliant product available,, Not intended for recirculating systems that produce continuous use temperatures above 115 F.
D0197.jpgDeluxe Mounting Gasket
Locke Part #: D0197MFG Part #: DMG-00 Compare
Designed specifically for use on the In-Sink-Erator , 777SS , 555SS , Pro 77 , and Pro SS .
DS05C1055.jpgDialSet NPT Pressure Reducing Valve, 3/4" Pipe Size
Locke Part #: E0267MFG Part #: DS06-101-SUT-LF/U Compare
Dimensions: 5-1/4" H x 4-5/16" Long, Valve Type: Pressure Regulating Valve, Ambient Temperature Range: 33° F to 140° F, Calibrated Adjustment Dial: Yes, Dial Calibration: ±4 psi, Differential: 14 psi min (inlet to outlet), Max Inlet Pressure Rating: 400 psi, Operating Temperature Range: 180°F (Max.), Outlet Pressure Adjustment Range: 15-90 psi, Pipe Size: 3/4", Reduced Pressure Range: 5 to 75 psi, Reducing Ratio: 10:1 max., Strainer Screen Size: 0.032", Union Fittings: Single-Union Threaded Dial is calibrated in 10 psi increments to allow quick and accurate adjustment of outlet pressure., Flow capacity and accuracy make the DS05 suitable for potable water service and most irrigation applications., High pressure (400 psi) inlet rating., Non-corroding unitized cartridge contains all working parts and is easily replaceable., Bronze body with stainless steel and engineered thermoplastic internal parts., Balanced single seat for accurate pressure output under varying inlet pressures., Inlet and outlet are internally threaded female NPT, and externally threaded for use with union assemblies., Built-in strainer and thermal bypass., One model can be used in low, standard or high pressure applications., Connection Type:, Female NPT threaded inlet and outlet. Externally threaded for unions, Materials:, Bronze (body), Fabric reinforced diaphragm, Stainless steel and engineered thermoplastics, Approvals:, Canadian Standards Association (B356), ASSE (1003), IAPMO
Qty: 12, Catalog Sequence: 3, Wt: 1 Lbs
WRJ.jpgDIELECTRIC WASHER
Locke Part #: L0013MFG Part #: WRJ Compare
D0270.jpgDipperwell Faucet & Bowl
Locke Part #: D0270MFG Part #: B-2282-01 Compare
D0270.jpgDipperwell Faucet Only
Locke Part #: D0271MFG Part #: B-2282 Compare
M655.jpgDishwasher/Disposer connector
Locke Part #: M0655MFG Part #: M655 Compare
Literature_HeaderImage-1-2000x550_c.jpgDISHWASHER AIR-GAP CHROME
Locke Part #: D0190MFG Part #: 995-000 Compare
Size: 3/4” female hose thread, swivel x 3/8” OD compression, Finish: Rough, Operating Temperature: 40°- 140° F, intermittent to 180° F, Working Pressure: 125 PSI maximum One-piece brass body provides strength, durability, and longer-lasting performance, Swivel hose thread nut simplifies fitting alignment to make the water connector installation quick and easy, High-temperature resistant washer for a reliable, longer-lasting performance, No Lead, To connect Whirlpool, Maytag, Amana, Kitchen Aid, and Jenn-Air dishwashers manufactured after September 2009 to flexible water connector., All female hose thread connections require a rubber washer inserted prior to installation.
D0196.jpgDisposal Wrenchette
Locke Part #: D0196MFG Part #: WRN-00 Compare
A quick, effective tool to help free simple j. Works only on In-Sink-Erator manufactured disposers.
RP63136MBS.jpgDiverter Assembly - Kitchen, Chrome, 60/Case
Locke Part #: A0725MFG Part #: RP63136MBS Compare
Finish: Chrome, Description Ext.: LEVER, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP63136MBS, DELTA FAUCET Description: Delta: Diverter Assembly - Kitchen, Case Quantity: 60, Series: Other
Description Ext.: ASSEMBLY, Pricing Category: adpt, Stock or OAN: S, DELTA FAUCET Model Number: RP19653, DELTA FAUCET Description: Delta: Diverter Assembly, Series: Other
A1058.jpgDiverter button for A0551
Locke Part #: A1058MFG Part #: 20623M CAP/GRAP