Parts Categories

Loading ...

Loading ...

Search in: Parts Category

Material: Plastic, Color/Finish: Chrome Plated Universal Chrome Plated Left Hand Plastic Trip Lever, Special ABS arm can be shaped to fit a variety of toilet tank trim configurations, Front Mount, Includes locknut
E0022.jpg #1- Bubbler Assembly With Lock Nut
Locke Part #: E0022 MFG Part #: 92715C Compare
Innovative design utilizes a pliable polyester elastomer to prevent accidental mouth injuries. Flexes on impact, then returns to original position. Strong, abrasion-resistant, anti-sweat. Keyed in location to prevent rotation.
M1022.jpg #7 - 1" Dual Check Backflow Preventer
Locke Part #: M1023 MFG Part #: 0072205 Compare
M1022.jpg #7 - 3/4" Dual Check Backflow Preventer
Locke Part #: M1022 MFG Part #: 0072204 Compare
E0021.jpg (#4) Regulator Cartridge
Locke Part #: E0021 MFG Part #: 61313C Compare
E0021.jpg (#4A) Regulator Cart. For E0005 & E0012
Locke Part #: E0031 MFG Part #: 61314C Compare
E0021.jpg (#6) Regulator Holder
Locke Part #: E0023 MFG Part #: 92450C Compare
Product Image Not Available 0 Flat Bibb Washers 100 Pack
Locke Part #: M1618 MFG Part #: W231A Compare
Size: 0.57” ID X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 18” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 24” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Size: 0.57” ID X 24” connector with 3/4” M.I.P x 7/8” OD Compression end fittings, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: water pressures up to 125 psi maximum Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braining, significantly increasing the flexibility of the connector, No kinking, No crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Won t work harden even with repeated bending, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, 100% compliant to California and Vermont low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply., Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F.
Product Image Not Available 00 Beveled Faucet 100 Pack
Locke Part #: M1610 MFG Part #: W230 Compare
Product Image Not Available 00 Flat Bibb 100 pack
Locke Part #: M1617 MFG Part #: W230A Compare
E0599.jpg 1" 150lb. 3" Long Shank Relief Valve
Locke Part #: E0599 MFG Part #: FVMX-3LS 150# Compare
1" 150lb. Long shank. AGA certified 500,000 btu/hr, ASME rated 2,155,000 btu/hr@150lb. For commercial hot water storage tanks.
M0931.jpg 1" C x C Brass Ball Valve
Locke Part #: M0933 MFG Part #: 94ALF20501A Compare
M15.jpg 1" Chrome Plated Escutcheon
Locke Part #: M0018 MFG Part #: 163 Compare
M4565.jpg 1" Coupling CTS x MIP
Locke Part #: M4566 MFG Part #: 74130-103 Compare
M4531.jpg 1" CTS Meter Setter
Locke Part #: M4567 MFG Part #: 721-410WXTT 44 1" Compare
T Comp. or 3T Comp. - bottom inlet/outlet, Angle Ball Valve - top inlet, Meter Nut top outlet
M1010.jpg 1" Double Check
Locke Part #: M1011 MFG Part #: 0063232 Compare
Size: 1", Weight: 3 lbs, Body: Bronze, Maximum Working Pressure: 400psi (27.6 bar), Temperature Range: 33˚F – 180˚F (0.5˚C – 82˚C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM, Valve Disc: Elastomer, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
BLF9101.jpg 1" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1164 MFG Part #: 77FLF10501 1" Compare
Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
M1517.jpg 1" FIP x 1" FIP Check Valve
Locke Part #: M1518 MFG Part #: CVNL100 Compare
M1426.jpg 1" IP Tee Handle Ball Valve
Locke Part #: M1427 MFG Part #: 759T05TSLF Compare
M0925.jpg 1" IPS Brass Ball Valve
Locke Part #: M0927 MFG Part #: 94ALF10501A Compare
Size: 1", Weight: 4.8 lbs, Body: Lead Free cast copper silicon alloy, Maximum Working Pressure: 150psi (10.3 bar), End Connection: Female NPT, Temperature Range: 33°F – 180°F (0.5°C – 83°C), Springs: Stainless steel, Bonnet: PPO, Vent Disc: EPDM, Disc Holder: PPO, Check Disc: Silicone rubber
Size: 1", Weight: 6.5 lbs, Body: Lead Free copper silicon alloy, Maximum Working Pressure: 300psi (20.7 bar), Temperature Range: 33°F – 160°F (0.5°C – 71°C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM with PTFE wetted surface, Valve Disc: EPDM, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
M4505.jpg 1" Leather Washers
Locke Part #: M4506 MFG Part #: 4124058 Compare
C0187.jpg 1" or larger supply
Locke Part #: C0188 MFG Part #: 45-1411 Compare
Genuine renewal parts
M1015.jpg 1" Pressure Breaker
Locke Part #: M1016 MFG Part #: 0792012 Compare
M1708.jpg 1" Pressure Vacuum Breaker Assembly
Locke Part #: M1710 MFG Part #: 720A 1" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg 1" Reduced Pressure Backflow Preventer
Locke Part #: M1001 MFG Part #: 0065373 Compare
M4505.jpg 1" Rubber Gaskets / Washers
Locke Part #: M4511 MFG Part #: 4124051 Compare
BLF9102.jpg 1" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1174 MFG Part #: 77FLF20501 1" Compare
Item: M1174, Size (in): 1, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M1700.jpg 1" Spill Resistant Pressure Vacuum Breaker Assembly
Locke Part #: M1700 MFG Part #: 460 XL 1 INCH SPILL PROO Compare
Maximum working water, Pressure : 150 PSI, Maximum working water, Temperature: 180 F, Hydrostatic test pressure: 300 PSI Threaded connections: ANSI B1.20.1, Replaceable thermoplastic modular cartridge. Spill resistant feature for indoor use.
100RS-100.jpg 1" Straight Valve-Rising Swivel-Red Brass
Locke Part #: M1512 MFG Part #: 100RS-100Y Compare
E1134.jpg 1" Sweat
Locke Part #: E1135 MFG Part #: 50614W Compare
Eliminating leak paths in the system, Shortening installation times, Fight the increasing costs of raw materials with step and time saving innovation methods
M0514.jpg 1" Swing Check Valve IPS
Locke Part #: M0516 MFG Part #: M516 Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
Size: 1", Capacity: 750000 BTU/hr, Temperature: 210°F, Pressure Set Point: 150 psi, Stem: 4-3/4", Thread Type: Female
WaterFlowMeter.jpg 1" Water Meter Lead Free
Locke Part #: M4547 MFG Part #: WM-100 1" Compare
Dimension: 1", Weight (lbs): 12.2, Flow Rating (gpm): 50, Continuous Flow (gpm): 25, Normal Flow Range (gpm): 3-50, Low Flow (gpm @ > 97%): 3/4, Extended Low Flow (gpm @ > 95%): 1/2, Maximum Working Pressure (psi): 150, Maximum Working Temperature (°F): 105, Specific Displacement (revs/gallon): 15.3/.96, Headloss at Maximum Flow Rate (psi): 7.9, Length (A ): 10.75", Width (B ): 6-13/16", Height Standard Register with lid (C ): 5.75", Height Bottom to Center Line (D): 2 5/8", Packed To Carton: 4, Carton Weight (lbs): 53.8 Hermetically sealed dry dial protected from the elements, won't discolor or fade, Proven multi-jet water meter design, Connections are external non-tapered meter threading (comes with Male NPT thread adapters), Integral strainer in measuring chamber protects measuring components from foreign debris., Tempered glass lens for continued readability., Hinged lens cover to protect lens and register from damage. Magnetic drive to eliminate potential leak point., Easy to read register display with large clear digits., Odometer measures in gallons up to 9,999,999(99,999,999 for WM150/200).
M0546.jpg 1" Water Press. Reduc. Valve
Locke Part #: M0548 MFG Part #: 0009490 Compare
Set at 45 lb. Reduces water pressure in service lines.
M1692.jpg 1" Water Pressure Reducing Valve
Locke Part #: M1694 MFG Part #: 70 1" PRV Compare
M1030.jpg 1" Wye Strainer Kit with Nipple
Locke Part #: M1032 MFG Part #: 0379113 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
C0239.jpg 1" x 1-1/8" x 10-1/2"
Locke Part #: C0240 MFG Part #: 110 Compare
C0239.jpg 1" x 10-1/2"
Locke Part #: C0239 MFG Part #: 109 Compare
F0790.jpg 1" x 3" I.P. 1 Bolt Style
Locke Part #: F0792 MFG Part #: 330-053 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
Product Image Not Available 1" x 3/4" Flanged Spud Washer
Locke Part #: M3490 MFG Part #: W363 Compare
M4562.jpg 1" x 3/4" Tee Connection CTS x CTS x CTS
Locke Part #: M4562 MFG Part #: 74760-22 Compare
M0931.jpg 1/2" C x C Brass Ball Valve
Locke Part #: M0931 MFG Part #: 94ALF20301A Compare
M15.jpg 1/2" Chrome Plated Escutcheon
Locke Part #: M0016 MFG Part #: M16-2000PCS Compare
E0304.jpg 1/2" Combination Fill Valve And Backflow Preventer
Locke Part #: E0304 MFG Part #: 0386463 Compare
Pressure-Temperature, Maximum Temperature: 212 degrees F (100 degrees C), Maximum Working Pressure: 100 psi (6.9 bars), Adjustment, Range, : 10-25 psi (68.7 - 172.4 kPa) set at 15 psi (103.4 kPa)
M0495.jpg 1/2" Comp. Stop CxC, 125#
Locke Part #: M0495 MFG Part #: M495 Compare
For use with water, oil or air. Brass body.
M663.jpg 1/2" Cone Washers
Locke Part #: M0663 MFG Part #: W430T THREADED Compare
M0027.jpg 1/2" CWT F&C Plate
Locke Part #: M0029 MFG Part #: 280 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
Size: 1/2" A necessity where drains are infrequently used. It should be installed a min. of 6" above grid of floor drain or flood level rim of equipment served.
R1634a.jpg 1/2" F1807 Dishwasher/Toilet Outlet Box For Crimp Pex
Locke Part #: M1178 MFG Part #: 696-G1001XF Compare
Strong installation, mounting on stud, Integral nail holes offer quick installation, Bracket track allows for adjustment between studs, Durable ABS stands up to job site abuse, Flip box for top supply, High-quality quarter-turn ball valve(s), 3/8" O.D. Compression outlet connection(s)
R1634a.jpg 1/2" F1960 Dishwasher/Toilet Outlet Box For Wirsbo Pex
Locke Part #: R1634 MFG Part #: 696-G1001WF Compare
Strong installation, mounting on stud, Integral nail holes offer quick installation, Bracket track allows for adjustment between studs, Durable ABS stands up to job site abuse, Flip box for top supply, High-quality quarter-turn ball valve(s), 3/8" O.D. Compression outlet connection(s)
BLF9101.jpg 1/2" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1162 MFG Part #: 77FLF10301 1/2" Compare
Item: M1162, Size (in): 1/2, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
A0335.jpg 1/2" FIP/Sweat Ell
Locke Part #: A0335 MFG Part #: 56CC Compare
For fiberglass & acrylic showers. Locknuts secure Ell. Female threads for arm & 1/2 male solder fitting for water supply. Brass with 2 locknuts.
E0048.jpg 1/2" FIP Anti-Scald
Locke Part #: E0048 MFG Part #: 0559116 Compare
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
tempera-pressure-balancing-valve.jpg 1/2" FIP Inlet & Discharge
Locke Part #: M0565 MFG Part #: TRB-2 Compare
Automatic pressure compensating, preventing thermal shock, Can be used with single or tow handle mixing valve assemblies, Meets A.S.S.E. STANDARD 1066 individual in-line pressure balancing valves, Holds a selected water temperature to within +- 3 F degree regardless of pressure change, Fully ported valve with minimal pressure drop, Safe and positive because it is a pressure balancing valve, not a thermostatic mixing valve, Construction Details:, External:, Red-Bronze cast body containing over 85% ingot copper. ASTM # B584 Alloy# C84400., Internal:, Stainless steel (# 303) is used in the piston and sleeve.
C182.jpg 1/2" FIP x 1/2" FIP, Self-Closing Urinal Valve
Locke Part #: C0182 MFG Part #: 184-12 Compare
Inlet Size: 1/2" FIP x 1/2" FIP Spring Loaded, Self-Closing Operation., For drinking fountains or other fixtures requiring manual valves., Heavy Casted Brass Body. Tamper resistant cross handle., Slip-stop prevents breakage. Tested for Quality & Dependability.
M675.jpg 1/2" Flanged Dishwasher Tailpiece Washer
Locke Part #: M0675 MFG Part #: 991-6 Compare
Inlet: 1/2" FNPT, Outlet: 3/8" FNPT It is efficient, dependable, quiet and versatile, It operates equally well at high or low pressures, Automatic metering design and balanced cartridge assembly, The push button operation resists damage and vandalism, The 190 features a casted brass body with triple chrome plating for long lasting finish, Each valve is water tested to assure proper operation once installed
Finish: Chrome Plated, Connection: 1/2" FPT, Qty: 24, Catalog Sequence: 1, Wt: 36 Lbs Heavy cast brass valve body. 3-Way design allows for multiple installation options., Includes one 1/2 brass plug to block off unused opening, Polished brass or chrome plated escutcheon., Shipped with Hearth Key. Available with Stem Extender., Natural Gas BTU Ratings: C-64 Gas Valve: 70,840 BTUH at 7 W.C. Inlet.
M0925.jpg 1/2" IPS Brass Ball Valve
Locke Part #: M0925 MFG Part #: 94ALF10301A Compare
M0027.jpg 1/2" IPS F&C Plate
Locke Part #: M0027 MFG Part #: 1237I Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
Size: 1/2", Weight: 4.5 lbs, Maximum Working Pressure: 175psi (12.1 bar)., Temperature Range: 33°F – 180°F (0.5°C – 82°C).
Short 90 Elbow Kit (Sold By The Pair)
E0260.jpg 1/2" NPT Union Thermostatic Mixing Valve
Locke Part #: E0260 MFG Part #: 34ALF 213T Compare
Dual purpose mixing or diverting valves, Constant water temperature under changing operating conditionsReliable at minimum flow of 0.5 gpm, Nickel-plated brass construction, EPDM O-rings, Straight through design (hot and cold at the same level), Max pressure 150 psi (1034 kPa), Max temperature 212 F (100 C), Tamper resistant design, Valve trapping not required, ASSE, CSA and IAPMO listed
M1730.jpg 1/2" PEX Crimp Tee ASTM F 1807
Locke Part #: M1930 MFG Part #: 660-GTX2B Compare
M1727.jpg 1/2" PEX Crimp Water Hammer Arrester, Commercial
Locke Part #: M1727 MFG Part #: 652-AX Compare
ANSI/ ASSE 1010-2004, Factory tested to withstand 500,000 cycles (654-C tested), Allows for installation in 2 4 wall cavity,, Installs at any angle, ASSE 1010 certified as a water hammer arrester that is designed to provide Continuous protection, without aintenance allowing the Hydra-Rester to be installed without access panels
M1168.jpg 1/2" PEX F 1807 Lavatory Box
Locke Part #: M1168 MFG Part #: 696-G2001XF Compare
ABS boxes mount securely to stud, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High-quality quarter-turn ball valves with 3/8" O.D. compression outlet connections
M1168.jpg 1/2" PEX F 1960 Lavatory Box
Locke Part #: R1633 MFG Part #: 696-G2001WF Compare
ABS boxes mount securely to stud, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High-quality quarter-turn ball valves with 3/8" O.D. compression outlet connections
B0374.jpg 1/2" PEX x 3/8" OD Comp 1/4 Turn Angle Stop
Locke Part #: B0374 MFG Part #: 114-609NL Compare
B0374.jpg 1/2" PEX x 3/8" OD Comp 1/4 Turn Straight Stop
Locke Part #: B0375 MFG Part #: 114-709NL Compare
B0343.jpg 1/2" PEX x Dual 3/8" OD Compression
Locke Part #: B0343 MFG Part #: 114-406NL Compare
E0320.jpg 1/2" Pressure Reducing Backflow Preventer
Locke Part #: E0320 MFG Part #: BFAC 1/2/ 23029-0014 Compare
M1708.jpg 1/2" Pressure Vacuum Breaker Assembly
Locke Part #: M1708 MFG Part #: 720A 1/2" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg 1/2" Reduced Pressure Backflow Preventer
Locke Part #: M0999 MFG Part #: 0391002 Compare
M1120.jpg 1/2" Reduced Pressure Backflow Preventer
Locke Part #: M1120 MFG Part #: 0792024 LF008PCQT Compare
BLF9102.jpg 1/2" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1172 MFG Part #: 77FLF20301 1/2" Compare
Item: M1172, Size (in): 1/2, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M1514.jpg 1/2" Swing Check Valve C x C
Locke Part #: M1514 MFG Part #: 521C03LF Compare
200 lb. pressure for water, oil or air. Cast Brass. Main use is to prevent backflow of fluids. C x C
M0514.jpg 1/2" Swing Check Valve IPS
Locke Part #: M0514 MFG Part #: M514 LF Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
E0050.jpg 1/2" Tempering Valve
Locke Part #: E0050 MFG Part #: 0559132 Compare
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
d0358.jpg 1/2" Vacuum Breaker
Locke Part #: D0358 MFG Part #: B-0969 Compare
To Replace/Repair Vacuum Breaker On D0307 & D0308
M1692.jpg 1/2" Water Pressure Reducing Valve
Locke Part #: M1692 MFG Part #: 1/2 NR3XL Compare
M1030.jpg 1/2" Wye Strainer Kit with Nipple
Locke Part #: M1030 MFG Part #: 0379111 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
F0790.jpg 1/2" x 3" I.P. 1 Bolt Style
Locke Part #: F0790 MFG Part #: 330-033 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
F0790.jpg 1/2" x 6" I.P. 2 Bolt Style
Locke Part #: F0825 MFG Part #: 330-036 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
KTBRPX19X C_STD.jpg 1/2"NOM BRB X 3/8"OD ANGVA
Locke Part #: B0329 MFG Part #: KTBRPX19X C Compare
Size: 1/2” Nom crimp barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance O-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability, and long-lasting performance, Brass stem is assembled from the inside out with two O-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents O-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance, and a sleek appearance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, 100% leak tested, 100% Compliant product available, For use in potable water distribution systems
KTBRPX14X C_EXP.jpg 1/2"NOM BRB X 3/8"OD STRVAL
Locke Part #: B0330 MFG Part #: KTBRPX14X C Compare
Size: Straight 1/2" Nom Barb x 3/8" OD Comp, Finish: Chrome, Quantity: 60, Weight (LBS): 13.2
BRPX19X C_STD.jpg 1/2"NOM BRBX 3/8 OD ANGVLV PX TBING
Locke Part #: B0303 MFG Part #: BRPX19X C Compare
Size: 1/2” nom crimp barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, Knurled oval handle provides a secure grip and smooth on/off operation,, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
BRPX14X C_STD.jpg 1/2 NOM BRBX 3/8"OD STRVLV PX TBING
Locke Part #: B0304 MFG Part #: BRPX14X C Compare
Size: 1/2” Nom. Barb (for PEX) x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, No Lead, PEX end designed to ASTM F1807, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems using ASTM F1807, and/or F2098 connection methods, Knurled oval handle provides a secure grip and smooth on/off operation,, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
CR1900DVSX R_STD.jpg 1/2 NOM COMP X 3/8 OD X 1/4 OD OFFSET 180 RGH
Locke Part #: B0448 MFG Part #: CR1900DVSX R Compare
Size: 1/2" Nom compression x 3/8” OD compression x 1/4” OD compression, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Independent flow control. Dual outlet, dual shut-off operation permits you to shut-off water flow to one fixture while maintaining water flow to another fixture, Code approved replacement where separate shut-offs are required for two lines, Knurled oval handle provides a secure grip and smooth on/off operation, Straight inlet to outlet design (same-side outlets) is great for installations in tight spaces, Machined one-piece brass body provides strength, durability, and long-lasting performance, For use with water in accessible locations only., Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% compliant product available,, Not intended for recirculating systems that produce continuous use temperatures above 115 F.
G2PS19X C.jpg 1/2 NOM PUSH CONNECT X 3/8 OD CON X 3/8CMP CHR
Locke Part #: B0372 MFG Part #: G2PS19X C Compare
Size: 1/2” Nom push connect x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Compatible with PEX, copper, and CPVC., Compact machined one-piece body design, Pre-inserted tube stiffener is installation ready for a faster connection, Fast, reliable, secure, Smooth 1/4 turn operation, 100% leak tested, 100% Compliant, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
Product Image Not Available 1/2 NOM PUSH CONNECT X 3/8 OD CON X 3/8CMP CHR
Locke Part #: B0373 MFG Part #: G2PS14X C Compare
Size: 1/2” Nom push connect x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum Compatible with PEX, copper, and CPVC., Compact machined one-piece body design, Pre-inserted tube stiffener is installation ready for a faster connection, Fast, reliable, secure, Smooth 1/4 turn operation, 100% leak tested, 100% Compliant, For use with water in accessible locations only., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
M0998.jpg 1/4" - 1/2" 009, 3/4" 009 M2
Locke Part #: M0998 MFG Part #: 0881399 Compare
Product Image Not Available 1/4" Beveled Faucet 100 Pack
Locke Part #: M1611 MFG Part #: W232 Compare
BLF9101.jpg 1/4" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1160 MFG Part #: 77FLF10101 1/4" Compare
Item: M1160, Size (in): 1/4, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Product Image Not Available 1/4" Flat Bibb Washers 100 Pack
Locke Part #: M1619 MFG Part #: W232A Compare
Product Image Not Available 1/4" Flat Bibb Washers 100 Pack
Locke Part #: M1620 MFG Part #: W233A Compare
C0227.jpg 1/4" Head Nut
Locke Part #: C0227 MFG Part #: 60 Compare
Product Image Not Available 1/4" L Beveled Faucet 100 Pack
Locke Part #: M1612 MFG Part #: W233 Compare
E0378.jpg 1/4" Pilot Assembly Lighter
Locke Part #: E0423 MFG Part #: 233-40248-08 Compare
C0237.jpg 1/4" x 12" Brass Float Rod
Locke Part #: C0237 MFG Part #: 103 Compare
C0219.jpg 1/4" x 2-1/2" Closet Screws
Locke Part #: C0219 MFG Part #: C219 Compare
C0222.jpg 1/4" x 2-1/4" Bolts
Locke Part #: C0222 MFG Part #: C02001B Compare
C0222.jpg 1/4" x 3-1/2" Bolts
Locke Part #: C0223 MFG Part #: 21SNWRW-TP Compare
C0219.jpg 1/4" x 3-1/2" Closet Screws
Locke Part #: C0220 MFG Part #: C220 Compare
G0262.jpg 1/4" x 4" Flat Head Bolt
Locke Part #: G0262 MFG Part #: 1649 Compare
Size: 1/4" x 4" Flat head machine screw. Plated.
M0449.jpg 1/4"- 4" OD Pipe Roof Flashing
Locke Part #: M0449 MFG Part #: 025-40 Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
M0449.jpg 1/4"-4" Red HI-Temp Flashing
Locke Part #: M2449 MFG Part #: #3 SILICONE RED Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
G2CEPX19X C_STD.jpg 1/4 TRN ANG VLV 1/2 NOM X 3/8 CMP
Locke Part #: B0266 MFG Part #: G2CR19X C Compare
Size: 1/2” Nom Compression x 3/8” OD Compression, Chrome Plated, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% Leak tested, No Lead, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), Not intended for recirculating water systems that produce continuous use temperatures above 115 F., For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems.
G2R17X C_STD.jpg 1/4 TURN ANG VLV 1/2 FIP X 3/8 CMP CP
Locke Part #: B0268 MFG Part #: G2R17X C Compare
Size: 1/2” F.I.P. x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-Piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut-off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% leak tested, Machined one-piece brass body provides strength, durability and long-lasting performance, Easy-to-remove handle with screw attachment protects accidental operation during rough-ins, Compliant G2 Stops available for California and Vermont no-lead Requirements, For use in potable water distribution systems., Not intended for recirculating systems that produce continuous use temperatures above 115 F.
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, Two high-performance O-rings withstand high temperatures and corrosion from harsh water environments, Machined, extruded brass body provides strength, durability, and long-lasting performance, Blow-out-proof brass stem is assembled from the inside out with two O-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Exclusive, chrome-plated metal handle is designed for durability, corrosion resistance, & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, 100% leak tested, 100% compliant product available, For use with water in accessible locations only.
Size: 1/2” Nom Compression x 1/4” OD Compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, 100% Leak tested, No Lead, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, For use with ASTM F876 PEX tubing, in ASTM F877 water distribution systems (parts containing PX and PXX only), Not intended for recirculating water systems that produce continuous use temperatures above 115 F., For use in ASTM F877 water distribution systems as noted in Appendixes (parts containing PX and PXX only), For use in potable water distribution systems.
Size: 1/2” nom CPVC x 3/8” OD compression, Finish: Chrome One-piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut-off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, 100% leak tested, 100% Compliant product available, For use with water in accessible locations only., Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
G2CR14X C_STD.jpg 1/4 TURN STR VLV 1/2 NOM X 3/8 CMP CP
Locke Part #: B0267 MFG Part #: G2CR14X C Compare
Size: 1/2” Nom compression x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 140° F, Pressure: 125 psi maximum One-Piece shut-off mechanism provides smooth on-off operation without freeze ups even after long periods of non-use, Positive 1/4 turn shut off, Full-flow operation with no waterway obstructions, Corrosion-resistant handle is plated in an attractive chrome finish, Machined one-piece brass body provides strength, durability, and long-lasting performance, Easy-to-remove handle with screw attachment helps protect against accidental operation during rough-ins, 100% Leak tested, No Lead, For use in potable water distribution systems. Not intended for recirculating water systems that produce continuous use temperatures above 115 F.
Size: 1/2” F.I.P x 3/8” OD Compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, TWO high-performance o-rings withstand high temperatures and corrosion from harsh water environments, 100% leak tested, Machined one-piece brass body provides strength, durability and long-lasting performance, Blow-out proof brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Patented, chrome plated metal handle is designed for durability, corrosion resistance & a sleek appearance, Easy-to-remove handle with screw attachment protects accidental stop operation during rough-ins, Compliant KT Stops available for California and Vermont low-lead requirements, For use in potable water distribution systems
Size: 1/2” Nom compression x 3/8” OD compression, Finish: Chrome, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum Precision-machined brass ball is specially engineered and mated with PTFE seats to provide smooth operation without freeze ups even after long periods of non-use, Two high-performance o-rings withstand high temperatures and corrosion from harsh water environments, Machined one-piece brass body provides strength, durability, and long-lasting performance, Brass stem is assembled from the inside out with two o-rings to ensure safe, reliable performance, Plated stem provides corrosion resistance and prevents o-ring damage after long periods of non-use, Exclusive, plated metal handle is designed for durability, corrosion resistance, and a sleek appearance, Easy-to-remove handle with screw attachment helps protect against accidental stop operation during rough-ins, 100% Leak tested. No Lead, For use with water in accessible locations only.
60PT-4_STD.jpg 1/4-in OD Tube Sleeves for Plastic Tube
Locke Part #: M0035 MFG Part #: 60PT-4 Compare
Size: 1/4” OD Tube, Operating Temperature: 40°- 180° F, Pressure: 125 psi maximum For use with PEX, vinyl and polyethylene tubing in potable water distribution systems, Not intended for use with steel, copper or aluminum tubing
E0378.jpg 1/8" Natural Gas Pilot Assembly
Locke Part #: E0435 MFG Part #: 233-40248-05 Compare
Length: 18", Inside Diameter: 1", End Connection Size: 1" FIP x 1" FIP, Temperature Rating: 40 - 250°F 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
C0230.jpg 1 Pair 5/16" x 3-1/4" of Bolts
Locke Part #: C0230 MFG Part #: C230 Compare
A0310.jpg 1 Pair of handles only. Less inserts
Locke Part #: A0310 MFG Part #: 98-0400 Compare
C0252.jpg 1 Pair White Caps
Locke Part #: C0252 MFG Part #: 917-PR Compare
D0425.jpg 1-1/2", 17 Gauge "P" Trap, With Brass Nuts
Locke Part #: D0436 MFG Part #: 105B Compare
Size: 1-1/2"
D0425.jpg 1-1/2", 20 Gauge "P" Trap, With Brass Nuts
Locke Part #: D0431 MFG Part #: 104B Compare
Size: 1-1/2"
D0425.jpg 1-1/2", 22 Gauge "P" Trap, Less Clean-Outs
Locke Part #: D0425 MFG Part #: 104X Compare
Size: 1-1/2"
M1402.jpg 1-1/2", White Plastic
Locke Part #: M1409 MFG Part #: 7949W Compare
D0427.jpg 1-1/2" 20 Gauge Repair P-Trap
Locke Part #: D0427 MFG Part #: 109 Compare
Size: 1-1/2"
D0428.jpg 1-1/2" 22 Gauge
Locke Part #: D0428 MFG Part #: 120X Compare
Size: 1-1/2" Satin Chrome
D0432.jpg 1-1/2" 22 Gauge J Bend
Locke Part #: D0432 MFG Part #: 131X Compare
Size: 1-1/2"
D0499.jpg 1-1/2" 45° Slip Joint Ell
Locke Part #: D0499 MFG Part #: 453 Compare
Size: 1-1/2"
D0498.jpg 1-1/2" 90 Degree Satin Chrome
Locke Part #: D0498 MFG Part #: 451 Compare
Size: 1-1/2"
M0098.jpg 1-1/2" Auto. Plumbing Vent
Locke Part #: M0098 MFG Part #: PV140BB Compare
D0501.jpg 1-1/2" Baffled Tee
Locke Part #: D0501 MFG Part #: 829T Compare
Size: 1-1/2" Satin Chrome
C0248.jpg 1-1/2" Brass Closet Spud
Locke Part #: C0248 MFG Part #: 959 Compare
M0931.jpg 1-1/2" C x C Brass Ball Valve
Locke Part #: M0935 MFG Part #: 94ALF20701A Compare
M15.jpg 1-1/2" Chrome Plated Escutcheon
Locke Part #: M0020 MFG Part #: 165 Compare
M674.jpg 1-1/2" Cloth Insert Washer
Locke Part #: M0674 MFG Part #: 302B Compare
M670.jpg 1-1/2" Cut Slip-Joint Washer
Locke Part #: M0671 MFG Part #: W310 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
290-20313.jpg 1-1/2" Drip-Free Slip Joint Washer
Locke Part #: M0695 MFG Part #: 290-20310 Compare
M696.jpg 1-1/2" Drip-Free Tailpiece Washer
Locke Part #: M0696 MFG Part #: 290-20380 Compare
25 per bag
R0909.jpg 1-1/2" DWV Slip Joint P-Trap
Locke Part #: R0909 MFG Part #: 4892 1 1/2" Compare
LA pattern,1-1/2" with slip joint nut & union, SJ x Hub.
D4027.jpg 1-1/2" Elbow
Locke Part #: D4027 MFG Part #: 521YPVC Compare
Used To Extend A Sink Trap Installation. Includes Reducing Adapter From 1-1/2" To 1-1/4".
BLF9101.jpg 1-1/2" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1166 MFG Part #: 77FLF10701 1 1/2" Compare
Item: M1166, Size (in): 1-1/2, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Size: with PVC adapter, Quantity: 12, Interleaved: 10021449974056, Dimensions (in): 13 x 10 x 6, Cubic Feet: 0.45 The Micro Size Magic Vent AAV has a 1 1/2 inch female threaded connection; however the valve is rated for 1 1/4 inch to 2 inch individual or branch vent pipes., Eliminates roof penetrations, When used in combination with the Magic Trap fitting, it is the quickest way to install a venting system, Great design flexibility, Permitted for use in accordance with: IPC 2012, Sec 917; IRC 2012; Manufactured Housing Construction and Safety Standard 2001, When used in combination with the Magic Trap fitting, it is the quickest way to install a venting system., Magic Vent Micro is also available with ABS or PVC adapter for easy installation in a wall cavity., U.S. Patent No. D427, 286.
Product Image Not Available 1-1/2" Flanged Spud Washer
Locke Part #: M0705 MFG Part #: W365 Compare
M0925.jpg 1-1/2" IPS Brass Ball Valve
Locke Part #: M0929 MFG Part #: 94ALF10701A Compare
M0027.jpg 1-1/2" IPS F&C Plate
Locke Part #: M0031 MFG Part #: 277 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M1402.jpg 1-1/2" IPS x 1-3/4" Deep, Chrome
Locke Part #: M1404 MFG Part #: 218 Compare
D4029.jpg 1-1/2" Joint Nut
Locke Part #: D4029 MFG Part #: 201YPVC Compare
PVC Slip Nuts Are Used To Secure Joints & Prevent Leaking. Simply Tighten To Secure.
M0435.jpg 1-1/2" Lead Boot Flashing
Locke Part #: M0435 MFG Part #: ECONOMY 1-1/2" Compare
97402.jpg 1-1/2" Magic Trap with Threaded Tee
Locke Part #: D0531 MFG Part #: 97402 Compare
Quantity: 12, Interleaved: 10021449974025, Dimensions (in): 12 x 12 x 12, Cubic Feet: 1.00 A 1-1/2 inch tubular polypropylene fitting., The Magic Trap fitting replaces any standard 1 1/2 inch tubular trap., The Micro size Magic Vent AAV screws directly onto the tee connection of the Magic Trap fitting., It automatically places the Magic Vent at the required 4 inch height above the drain pipe to which it is connected., The installation time for the vent system is approximately 25 seconds., Saves time and money.
M25.jpg 1-1/2" OD Escutcheons
Locke Part #: M0026 MFG Part #: 213 Compare
M1015.jpg 1-1/2" Pressure Breaker
Locke Part #: M1028 MFG Part #: 0792014 Compare
M1708.jpg 1-1/2" Pressure Vacuum Breaker Assembly
Locke Part #: M1712 MFG Part #: 720A 1-1/2" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
D0535.jpg 1-1/2" PVC Disposer Waste With Baffle Tee
Locke Part #: D0535 MFG Part #: 600PPVCBG Compare
Size: 1-1/2"
D0533.jpg 1-1/2" PVC P-Trap
Locke Part #: D0533 MFG Part #: 837PVCBG Compare
Size: 1-1/2" Bayonet locking system takes one 1/4 turn to guarantee a secure, no leak tubular connection
M0999.jpg 1-1/2" Reduced Pressure Backflow Preventer
Locke Part #: M1003 MFG Part #: 0065375 Compare
D0433.jpg 1-1/2" Slip Joint Repair Coupling
Locke Part #: D0433 MFG Part #: 449 Compare
Size: 1-1/2"
BLF9102.jpg 1-1/2" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1176 MFG Part #: 77FLF20701 1 1/2" Compare
Item: M1176, Size (in): 1-1/2, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M709.jpg 1-1/2" Stopper
Locke Part #: M0709 MFG Part #: S104 Compare
M0514.jpg 1-1/2" Swing Check Valve IPS
Locke Part #: M0518 MFG Part #: M518 LF Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
D0558.jpg 1-1/2" Trap
Locke Part #: D0558 MFG Part #: P9046A Compare
Size: 1-1/2"
M1025.jpg 1-1/2" Water Press. Reduc. Valve
Locke Part #: M1026 MFG Part #: 0009431 Compare
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1030.jpg 1-1/2" Wye Strainer Kit with Nipple
Locke Part #: M1034 MFG Part #: 0379115 LF777SI Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
D0438.jpg 1-1/2" x 1-1/2"
Locke Part #: D0438 MFG Part #: 105CO Compare
Size: 1-1/2" x 1-1/2" Chrome plated with clean-out.
M0008.jpg 1-1/2" x 1-1/2" Slip Joint Nut
Locke Part #: M0009 MFG Part #: 310-C Compare
M670.jpg 1-1/2" x 1-1/4" Cut Slip-Joint Washer
Locke Part #: M0664 MFG Part #: W312 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
D0536.jpg 1-1/2" x 1-1/4" PVC Plastic "P" Trap
Locke Part #: D0536 MFG Part #: 802NPVCBG Compare
Size: 1-1/2" x 1-1/4" With 1-1/4" slip joint washer. Adapts to Schedule 40 pipe out of the wall.
D0537.jpg 1-1/2" x 1-1/4" S Trap
Locke Part #: D0537 MFG Part #: 816PVCBG Compare
Size: 1-1/2" x 1-1/4"
M0008.jpg 1-1/2" x 1-1/4 Slip Joint Nut
Locke Part #: M0011 MFG Part #: 312-C Compare
D0455.jpg 1-1/2" x 12"
Locke Part #: D0458 MFG Part #: 428 Compare
Size: 1-1/2" x 12" For Sink Strainers Regular, satin chrome.
M0002.jpg 1-1/2" x 12" 16 Gauge 4 Hole
Locke Part #: M0003 MFG Part #: PS 1216 Compare
Extra long protection of mechanical runs., Heavy steel
D0544.jpg 1-1/2" x 12" PVC
Locke Part #: D0545 MFG Part #: 918PVC Compare
Size: 1-1/2" x 12"
D0465.jpg 1-1/2" x 12" Satin Chrome
Locke Part #: D0468 MFG Part #: 444-12 Compare
Size: 1-1/2" x 12"
D0541.jpg 1-1/2" x 12" Tailpiece
Locke Part #: D0541 MFG Part #: 903PVC Compare
Size: 1-1/2" x 12" Poly washers are supplied for kitchen or lavatory installation.
D0471.jpg 1-1/2" x 12" Tube
Locke Part #: D0471 MFG Part #: 817 Compare
Size: 1-1/2" Satin Chrome. Threaded at both ends.
D4039.jpg 1-1/2" x 12 White PVC
Locke Part #: D4039 MFG Part #: 912PVC Compare
Size: 1-1/2" x 12 Solvent weld type, one end.
D0542.jpg 1-1/2" x 15" Waste Arm
Locke Part #: D0542 MFG Part #: 5134YPVC Compare
Size: 1-1/2"x15"
D0443.jpg 1-1/2" x 16" C/O Hi-Line Continuous Waste
Locke Part #: D0443 MFG Part #: 820 Compare
Size: 1-1/2" X 16" Satin Chrome. Direct Hookup To Strainer.
D0442.jpg 1-1/2" x 16" C/O Regular Continous Waste
Locke Part #: D0442 MFG Part #: 2823 Compare
Size: 1-1/2" X 16" Satin chrome. Slip Joint
D0441.jpg 1-1/2" x 16" E/O Hi-Line Continuous Waste
Locke Part #: D0441 MFG Part #: 826 Compare
Size: 1-1/2" X 16" Satin Chrome. Direct Hookup To Strainer.
D0440.jpg 1-1/2" x 16" E/O Regular Continuous Waste
Locke Part #: D0440 MFG Part #: 829 Compare
Size: 1-1/2" X 16" Satin chrome. Slip Joint
D0546.jpg 1-1/2" x 16" PVC Double Flanged
Locke Part #: D0546 MFG Part #: 904PVC Compare
Size: 1-1/2" x 16"
D0534.jpg 1-1/2" x 16" White PVC With Nuts
Locke Part #: D0534 MFG Part #: 919PVC Compare
Size: 1-1/2" x 16"
D0538.jpg 1-1/2" x 16 Center Outlet
Locke Part #: D0540 MFG Part #: TW516UPVCBG Compare
Size: 1-1/2" x 16 Adapts to either high-line or regular connections.
D0538.jpg 1-1/2" x 16 End Outlet
Locke Part #: D0538 MFG Part #: T540YUPVCBG Compare
Size: 1-1/2" x 16 Adapts to either high-line or regular connections.
M0002.jpg 1-1/2" x 18" 16 Gauge 4 Hole
Locke Part #: M0004 MFG Part #: PS 1816 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg 1-1/2" x 18" 16 Gauge 8 Hole
Locke Part #: M0013 MFG Part #: PS 1816 8 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0001.jpg 1-1/2" x 24" Stud Guard, 18 Gauge
Locke Part #: M0012 MFG Part #: SP 2418 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
M0001.jpg 1-1/2" x 3" Stud Guard, 16 Gauge
Locke Part #: M1303 MFG Part #: SP316100 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
D0455.jpg 1-1/2" x 4"
Locke Part #: D0455 MFG Part #: 424 Compare
Size: 1-1/2" x 4" For Sink Strainers Regular, satin chrome.
M0001.jpg 1-1/2" x 5" Stud Guard, 16 Gauge
Locke Part #: M0001 MFG Part #: SP 516100 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
D0455.jpg 1-1/2" x 6"
Locke Part #: D0456 MFG Part #: 425 Compare
Size: 1-1/2" x 6" For Sink Strainers Regular, satin chrome.
M0002.jpg 1-1/2" x 6" 16 Gauge 3 Hole
Locke Part #: M5076 MFG Part #: PS0616-3 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
D0465.jpg 1-1/2" x 6" Satin Chrome
Locke Part #: D0465 MFG Part #: 444-6 Compare
Size: 1-1/2" x 6"
D0455.jpg 1-1/2" x 8"
Locke Part #: D0457 MFG Part #: 426 Compare
Size: 1-1/2" x 8" For Sink Strainers Regular, satin chrome.
Size: 1-1/2" X 8" Gravity feed, no mechanical parts, Replenishes water in floor drain traps to prevent the escape of sewer gases
D0508.jpg 1-1/2" x 8" Dish. Tip
Locke Part #: D0508 MFG Part #: 925 Compare
Size: 1-1/2" x 8" Satin Chrome
D0544.jpg 1-1/2" x 8" PVC
Locke Part #: D0544 MFG Part #: 917PVC Compare
Size: 1-1/2" x 8"
Size: 1-1/2" x 8"
Size: 1-1/2" x 8"
Size: 1-1/2" x 8"
D0465.jpg 1-1/2" x 8" Satin Chrome
Locke Part #: D0466 MFG Part #: 444-8 Compare
Size: 1-1/2" x 8"
M0002.jpg 1-1/2" x 9" 16 Gauge 4 Hole
Locke Part #: M0002 MFG Part #: PS 0916 Compare
Extra long protection of mechanical runs., Heavy steel
M0001.jpg 1-1/2" x 9" Stud Guard, 18 Gauge
Locke Part #: M0006 MFG Part #: SP 0918 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
P-1610.jpg 1-1/2” J-Hook with Nail
Locke Part #: M1440 MFG Part #: 33740 Compare
Case Quantity: 125, Item: M1440, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
M1405.jpg 1-1/2 IPS Flange Trim- Tite Escutcheon
Locke Part #: M1407 MFG Part #: 921-6W Compare
White Plastic, Shallow.
M1402.jpg 1-1/4", Chrome
Locke Part #: M1403 MFG Part #: 216 Compare
D4013.jpg 1-1/4" & 1-1/2" P Trap
Locke Part #: D4013 MFG Part #: 805PVCBG Compare
Replaces Conventional Metal P Trap With Non-Corrosive PVC Plastic.
D4017.jpg 1-1/4" & 1-1/2"J Bend
Locke Part #: D4017 MFG Part #: 810PVCBG Compare
PVC Noncorrosive Replacement "J" Bend. Can Be Used With The Conventional Metal Tubular Products.
Round Gasket.jpg 1-1/4" - 1-1/2" Flange Replacement Gasket
Locke Part #: E1173 MFG Part #: 91130185 Compare
M0998.jpg 1-1/4" - 2" 009M1, or 1" - 3" 009/909, Air Gap
Locke Part #: M0996 MFG Part #: 0881576 Compare
C0248.jpg 1-1/4" Brass Closet Spud
Locke Part #: C0245 MFG Part #: 57-0515 Compare
M0931.jpg 1-1/4" C x C Brass Ball Valve
Locke Part #: M0934 MFG Part #: 94ALF20601A Compare
M15.jpg 1-1/4" Chrome Plated Escutcheon
Locke Part #: M0019 MFG Part #: 164 Compare
M670.jpg 1-1/4" Cut Slip-Joint Washer
Locke Part #: M0670 MFG Part #: W309 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
290-20313.jpg 1-1/4" Drip-Free Slip Joint Washer
Locke Part #: M0694 MFG Part #: 290-20300 Compare
BLF9101.jpg 1-1/4" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1165 MFG Part #: 77FLF10601 1 1/4" Compare
Item: M1165, Size (in): 1-1/4, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
M1517.jpg 1-1/4" FIP x 1-1/4" FIP Check Valve
Locke Part #: M1519 MFG Part #: CVNL125 Compare
Model: W364, Size: 1-1/4"
M0702.jpg 1-1/4" ID, 2" OD Gasket
Locke Part #: M0702 MFG Part #: G12 Compare
M0925.jpg 1-1/4" IPS Brass Ball Valve
Locke Part #: M0928 MFG Part #: 94ALF10601A Compare
M0027.jpg 1-1/4" IPS F&C Plate
Locke Part #: M0030 MFG Part #: 1237L Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M1402.jpg 1-1/4" IPS x 1-1/2" Deep, Chrome
Locke Part #: M1402 MFG Part #: 215 Compare
M25.jpg 1-1/4" OD Escutcheons
Locke Part #: M0025 MFG Part #: 212 Compare
M1015.jpg 1-1/4" Pressure Breaker
Locke Part #: M1024 MFG Part #: 0792013 Compare
M0999.jpg 1-1/4" Reduced Pressure Backflow Preventer
Locke Part #: M1002 MFG Part #: 0065374 Compare
BLF9102.jpg 1-1/4" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1175 MFG Part #: 77FLF20601 1 1/4" Compare
Item: M1175, Size (in): 1-1/4, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
E1130.jpg 1-1/4" Sweat
Locke Part #: E1132 MFG Part #: 50415W Compare
Eliminating leak paths in the system, Shortening installation times, Exclusive purge & drain feature, 600 WOG 150 WSP, Prevents electrolysis and eliminates galvanic corrosion, Includes mounting bolts, nuts and an additional wing style T handle, Allows virtually no air into the system upon pump replacement, Fits most circulator pumps, Adjustable packing gland for lifetime protection, Threaded ends comply with ANSI B1.20.1, Solder ends comply with ANSI B16.18, Hose threads comply with B1.20.7, Quick quarter turn ball valve
E1134.jpg 1-1/4" Sweat
Locke Part #: E1136 MFG Part #: 50615W Compare
Eliminating leak paths in the system, Shortening installation times, Fight the increasing costs of raw materials with step and time saving innovation methods
M0514.jpg 1-1/4" Swing Check Valve IPS
Locke Part #: M0517 MFG Part #: M517 Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
M1025.jpg 1-1/4" Water Press. Reduc. Valve
Locke Part #: M1025 MFG Part #: 0009392 Compare
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1030.jpg 1-1/4" Wye Strainer Kit with Nipple
Locke Part #: M1033 MFG Part #: 0379114 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M0008.jpg 1-1/4" x 1-1/4" Slip Joint Nut
Locke Part #: M0008 MFG Part #: 309-C Compare
F0790.jpg 1-1/4" x 3" I.P. 1 Bolt Style
Locke Part #: F0793 MFG Part #: 330-063 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
Size: 1-1/4" X 6" Gravity feed, no mechanical parts, Replenishes water in floor drain traps to prevent the escape of sewer gases
B0288.jpg 1-1/4" x 6" Fine Thread
Locke Part #: B0288 MFG Part #: 213-067 Compare
D0544.jpg 1-1/4" x 6" PVC
Locke Part #: B0359 MFG Part #: 9164PVC Compare
Size: 1-1/4" x 6"
M1278.jpg 1-1/4"-2" Air Gap
Locke Part #: M1278 MFG Part #: 0881378 Compare
A2430.jpg 1-15/16" Cold
Locke Part #: A2433 MFG Part #: 11-3114C Compare
A2430.jpg 1-15/16" Hot
Locke Part #: A2432 MFG Part #: 11-3114H Compare
A2430.jpg 1-15/16" Hot
Locke Part #: A2436 MFG Part #: 11-3410H Compare
A2430.jpg 1-3/4" Cold
Locke Part #: A2431 MFG Part #: 11-3113C Compare
A2430.jpg 1-3/4" Hot
Locke Part #: A2430 MFG Part #: 11-3113H Compare
M73.jpg 1.25" - 2" dia. Sure-Vent™
Locke Part #: M0073 MFG Part #: 39220 Compare
The Sure-Vent is a new air admittance valve certified to vent individual/multiple fixtures easily & reliably. It can withstand positive pressures up to 30 feet of- head.
Aluminum.jpg 1.5"-2"-3" Aluminum Roof Flashings
Locke Part #: M0412 MFG Part #: AN123 Compare
Warranty: 20 year limited warranty, Color: Mill finish, Type: Aluminum with Premium elastomeric collar Will work on high pitch roof up to 60 .
M0402.jpg 1.5"-3" Pipe Flashing
Locke Part #: M0402 MFG Part #: 11930 Compare
C0030.jpg 1.6 Fill Valve For T8 & HP Western Closets
Locke Part #: C0030 MFG Part #: WP16FILLVALVE Compare
For T8 & HP Western Closets
68-9104.jpg 10" Anti-Siphon Hoover Ballcock
Locke Part #: C0275 MFG Part #: 68-9104 Compare
Ballcock Size: 10"
Size: 10" Fits some Mansfield toilets, For use in 3.5 & 1.6 Gpf toilets, Replaces 08ULF-10 And 88-10, Adjustable water level, Snap action shut-off, Unified, non-electrolytic and non-corrosive construction, Efficient operation at low or high water pressures, Easy to install, Includes 7-1/2" float rod, 7" refill tube, acetal locknut and coupling nut
R1002.jpg 10" Rectangular Lid Only
Locke Part #: R2124 MFG Part #: 10124001 Compare
Comes with leak proof, snap-in green cover. 10" x 12" x 10" deep with 4" x 4" pipe slot
R1002.jpg 10" Rectangular Valve Box With Lid
Locke Part #: R1002 MFG Part #: 10121002 Compare
Comes with leak proof, snap-in green cover. 10" x 12" x 10" deep with 4" x 4" pipe slot
PVB10RND_Green-Lid.jpg 10" Round Lid Only
Locke Part #: R2123 MFG Part #: A12520L Compare
Light & durable construction, Side ridges for additional side wall support, Pre-molded pipe slots, Bottom flanges to help prevent sinking, Overlapping lid with bolt hole and twist lock, Skid-resistant lid texture, Body built with double ridges for additional sidewall support
M688.jpg 100 Assort. Ballcock Screw
Locke Part #: M0688 MFG Part #: S-1 14501 Compare
Assortment consists of 100 pieces packed in screw top can. Solid brass faucet screws, nickel-plated eccentric and handle screws, brass thumb screws, and plated cotter pins for ballocks.
M690.jpg 100 Assorted O Rings of the Most Popular Sizes
Locke Part #: M0690 MFG Part #: R60AP Compare
Size: 11-1/2" Fits some Mansfield toilets including tank model 035, 125, 160, 161, 160RH, 165, 170, 171, 175, 180, 181, 190, Profit1, Profit2 and Profit3, For use in 3.5 & 1.6 Gpf toilets, 11-1/2" with, adjustable water level, Snap action shut-off, Easy to install, Unified, non-electrolytic and non-corrosive construction, Efficient operation at low or high water pressures, Includes 7-1/2" float rod, 7" refill tube, acetal locknut and coupling nut
123-0216.jpg 11-1/2" Float Assembly For Models 210, Pack of 50
Locke Part #: C0289 MFG Part #: 123-0216-50 Compare
Size: 11-1/2" Converts a Mansfield brand 1.6 gpf to a 2.2 gpf toilet, making it flush twice per trip, For Model 210 Flush Valve - 3.5 GPF
Size: 11-3/4", Material: Plastic, Shipping Weight: Approx. 12 Lb, Water Consumption: 3.5 gpf Replaces most types of flush valves, Includes spud gasket and spud locknut, Fits Mansfield tank models 011, 021, 026, & 035, Fits virtually any tank-type toilet, Also fits the Kilgore 201-WS toilet, Provides a 3.5 gpf, 11-3/4" overall, 10-1/8" from toilet tank to top of valve, Fits model 3.5 gpf tanks, Won't hang up or stick open, Seals tight every time, Accommodates all trip levers (direct connect or chain connect), Installation instructions included, Replacement seals, are available separately, Made in USA
68-9102.jpg 12" Anti-Siphon Hoover Ballcock
Locke Part #: C0274 MFG Part #: 68-9102 Compare
Ballcock Size: 12"
OCR19B120DLXC.jpg 12" Braided Connector 1/2" Nom Compression x 7/8" Ballcock
Locke Part #: C0202 MFG Part #: OCR19B120DLX C Compare
Size: 1/2" Nom Compression x 7/8" Ballcock, Length (in): 12, Quantity: 50, Weight (LBS): 18.5
Size: 12", Material: Plastic, Water Consumption: 1.6 Gpf/6.0 Lpf Won't hang up or stick open, Includes spud gasket and locknut, #211 looks similar to the #210 but is calibrated at 1.6gpf and can be used with chain, Installation instructions included, Fits models 125, 159, 160, 161, 165, 170, 171, 175, 180, 181, 190, Profit1, Profit2 and Profit3, 12" overall, 10-1/8" from toilet tank to top of valve, Seals tight every time, Provides 1.6 Gpf/6.0 Lpf water consumption, Accommodates all trip levers (direct connect or chain connect), Replacement seals, are available separately,, Made in USA
universal-gas-valve-key-18-polished-chrome.jpg 12" Polished Chrome Gas Fireplace Key.
Locke Part #: M1473 MFG Part #: NKY.12 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 12" Length, Use With: 1/4" or 5/16" Gas Valve Stems, Polish: Chrome
R2122.jpg 12" Rectangular Lid Only
Locke Part #: R2122 MFG Part #: DS12001L Compare
Standard 12" rectangular box with leak proof, Snap-in green cover, 12" deep
PB1001.jpg 12 Piece Valley Repair Kit
Locke Part #: D0553 MFG Part #: PB 1001 Compare
Packaging: 12 Piece
A2182.jpg 120pc Bibb seal kit
Locke Part #: A2182 MFG Part #: AB555-1120 Compare
Transformer.jpg 120V Transformer for CC & CR Series
Locke Part #: E1403 MFG Part #: BH1205006A Compare
D0482.jpg 13/16" Male Aerator
Locke Part #: D0482 MFG Part #: 464FR Compare
13/16"-27" outside threads, for use on small faucet with inside threads.
d600e-ext_3.jpg 14" x 19" x 6" AMR Meter Box Extension
Locke Part #: F0048 MFG Part #: D600E EXT Compare
Color: Black
Color: Black, Weight: 2.6
Color: Black
Item: B0654 PUSHON, over existing ferrule., Designed to be pushed onto copper and CPVC pipe with or without a brass compression ferrule., Tested to 1,000 psi., Easy Pull/Push ON/OFF Handle., Original one-piece factory attached connector, Removable and Reusable., 100% non-metallic water contact., NSF certified, Clean look., 1/2 nom. with attached PVC or Braided High Performance connector, x 1/2 reinforced polymer IPS nut with escutcheon.
D0481.jpg 15/16" Male Aerator
Locke Part #: D0481 MFG Part #: 462FR Compare
15/16"-17" outside threads, for use on regular faucet with inside threads.
M1650.jpg 150 Assorted Washers With Six 10-24 Screws
Locke Part #: M1650 MFG Part #: 291-30125 Compare
SBR (synthetic blended rubber)
291-30125.jpg 150 Assorted Washers With Six 10-24 Screws
Locke Part #: M1652 MFG Part #: 291-30225 Compare
SBR (synthetic blended rubber)
E0105.jpg 1500W 120V
Locke Part #: E0105 MFG Part #: 265-42540-02 Compare
For Flanged Elements:
E0113.jpg 1500W 120V
Locke Part #: E0113 MFG Part #: 265-42541-02 Compare
Sand and Lime Fighter Element For Flanged Elements:
E0114.jpg 1500W 120V
Locke Part #: E0114 MFG Part #: 265-42540-03 Compare
For Flanged Elements:
Type: Ultra LWD, Qty: 12, Watts @ 120v: 1500w, Nominal Voltage: 120v, Min Tank Diameter: 9" Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
E0113.jpg 1500W 240V
Locke Part #: E0055 MFG Part #: 265-42545-13 Compare
Sand and Lime Fighter Element For Flanged Elements:
A2181.jpg 150pc O-ring kit
Locke Part #: A2181 MFG Part #: 540-0151 Compare
Color: Silver, Material: Metal, Dimension (L x W): 16” x 3-1/4”, Weight (lbs): 0.85
M418.jpg 16 oz. Shower Pan Liner Cement for M0415, M0417
Locke Part #: M0418 MFG Part #: 30812 Compare
291-30125.jpg 170 Washers With Snap-In Chrome Wire Holders
Locke Part #: M1653 MFG Part #: 291-30226 Compare
SBR (synthetic blended rubber)
universal-gas-valve-key-18-polished-chrome.jpg 18" Polished Chrome Gas Fireplace Key.
Locke Part #: M1474 MFG Part #: NKY.18 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 18" Length, Use With: 1/4" or 5/16" Gas Valve Stems & Fire Pits, Polish: Chrome
F0045.jpg 18" x 24" Round Plastic Water Meter Can With Lid
Locke Part #: F0045 MFG Part #: 22001006 Compare
Plastic valve boxes and lids are structurally molded of noncorrosive Polyethylene, using a patented process.
A0426.jpg 2" Adjust. Chrome head
Locke Part #: A0427 MFG Part #: F-15 Compare
C0249.jpg 2" Brass Closet Spud
Locke Part #: C0249 MFG Part #: C249 Compare
p54200.jpg 2" Brass Plug For Extension Cover 2-3/8" OD
Locke Part #: G0263 MFG Part #: P54-200 Compare
Size: 2", Outer Dimension: 2-5/16" Countersunk plug tapped 1/4-20, Stainless Steel
M0931.jpg 2" C x C Brass Ball Valve
Locke Part #: M0936 MFG Part #: 94ALF20801A Compare
M15.jpg 2" Chrome Plated Escutcheon
Locke Part #: M0021 MFG Part #: 166 Compare
A0426.jpg 2" Chrome plated water saver
Locke Part #: A0426 MFG Part #: A426 Compare
T1500a.jpg 2" Clean Seal Plug
Locke Part #: T1500 MFG Part #: 271705 Compare
M670.jpg 2" Cut Slip-Joint Washer
Locke Part #: M0672 MFG Part #: W313 Compare
Grey rubber. All packed 100 per box. Heavy wall. 3/16" thick.
M1276.jpg 2" Double Check Valve Assembly
Locke Part #: M1276 MFG Part #: 0063235 Compare
BLF9101.jpg 2" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1167 MFG Part #: 77FLF10801 2" Compare
Item: M1167, Size (in): 2, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Product Image Not Available 2" Flanged Spud Washer
Locke Part #: M0706 MFG Part #: W366 Compare
C0247.jpg 2" Flush Valve
Locke Part #: C0247 MFG Part #: C247 Compare
M0925.jpg 2" IPS Brass Ball Valve
Locke Part #: M0930 MFG Part #: 94ALF10801A Compare
M0027.jpg 2" IPS F&C Plate
Locke Part #: M0032 MFG Part #: 278 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M0435.jpg 2" Lead Boot Flashing
Locke Part #: M0436 MFG Part #: ECONOMY 2" Compare
M547.jpg 2" Plastic Backwater Valve
Locke Part #: M0547 MFG Part #: 802-7 Compare
Usually used in floor drains. Prevents backflow or flooding if drain lines get stopped up. 2" MIP.
M1015.jpg 2" Pressure Breaker
Locke Part #: M1029 MFG Part #: 0792015 Compare
M1708.jpg 2" Pressure Vacuum Breaker Assembly
Locke Part #: M1713 MFG Part #: 720A 2" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg 2" Reduced Pressure Backflow Preventer
Locke Part #: M1004 MFG Part #: 0065376 Compare
BLF9102.jpg 2" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1177 MFG Part #: 77FLF20801 2" Compare
Item: M1177, Size (in): 2, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
M0514.jpg 2" Swing Check Valve IPS
Locke Part #: M0519 MFG Part #: M519 Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
M1025.jpg 2" Water Press. Reduc. Valve
Locke Part #: M1027 MFG Part #: 0009465 Compare
Set at 50 psi. Initial pressure up to 300 psi. NPT thread female union in x NPT fem. out.
M1030.jpg 2" Wye Strainer Kit with Nipple
Locke Part #: M1035 MFG Part #: 0379116 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M0008.jpg 2" x 2" Slip Joint Nut
Locke Part #: M0010 MFG Part #: 313-C Compare
R2131.jpg 2" x 3" Drain with Strainer
Locke Part #: R2131 MFG Part #: 841-2P Compare
PVC Multi-purpose floor drain. Custom fit your own P-trap or areaway drain. 2" x 3" Schedule 40.
R2131.jpg 2" x 3" threaded drain, 2" FIP
Locke Part #: R2132 MFG Part #: 841-2PH Compare
PVC Multi-purpose floor drain. Custom fit your own P-trap or areaway drain. 2" x 3" Schedule 40.
P-1610.jpg 2” J-Hook with Nail
Locke Part #: M1441 MFG Part #: 33741 Compare
Case Quantity: 125, Item: M1441, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
C0211.jpg 2 x 5" x 7" Chrome
Locke Part #: C0211 MFG Part #: 34514 Compare
E0044.jpg 2-1/2" Brass Valve
Locke Part #: E0042 MFG Part #: 265-42351-04 Compare
C0226.jpg 2-1/4" Closet Bolts; 1 pair
Locke Part #: C0226 MFG Part #: 425-PB Compare
A2430.jpg 2-1/4" Cold
Locke Part #: A2435 MFG Part #: 11-3210C Compare
A2430.jpg 2-1/4" Hot
Locke Part #: A2434 MFG Part #: 11-3210H Compare
M700.jpg 2-1/4" ID Flush Valve Washer
Locke Part #: M0700 MFG Part #: W326 Compare
630-7984.jpg 2-1/8" Dia. Ballcock Service Kit, Pack of 10
Locke Part #: C0203 MFG Part #: 630-7984-10 Compare
Dimensions: 2-1/8" Diameter 2-1/8" diameter, Fill valve repair kit for all 08 & 88 fill valves, Includes one (1) upper and one (1) lower diaphragm
A1099.jpg 2-1/8" Diverter for D0549
Locke Part #: A1099 MFG Part #: A66G391 Compare
Size: 2-3/4"
M0704.jpg 2-3/8" Waste & Overflow Washer
Locke Part #: M0704 MFG Part #: W513 Compare
Case Quantity: 50, Item: M1308, UOM: EA Post-stamping copper plating for a uniform copper coat., Copper plated for soldering to copper pipe., 20 and 26 Length (Reference table), 16 gauge AISI 1000-Series steel, UPC Certified
Case Quantity: 50, Item: M1283, UOM: EA Angled brackets are designed with ribs for strength,, 14 guage AISI 1000-Series steel, Sturdy, galvanized steel brackets with 1 3/8"keyed holes accommodate grommets for all pipe types, IAPMO, UPC Certified
P-1054.jpg 20" Galvanized One-Hole Flat PipeSecure Bracket
Locke Part #: M1286 MFG Part #: P-1054 Compare
Case Quantity: 50, Item: M1286, UOM: EA Angled brackets are designed with ribs for strength,, 14 guage AISI 1000-Series steel, Sturdy, galvanized steel brackets with 1 3/8"keyed holes accommodate grommets for all pipe types, IAPMO, UPC Certified
M684.jpg 20 Piece Washers & Screws
Locke Part #: M0684 MFG Part #: W292BF Compare
Neoprene washer and screw assortment. Contains 20 assorted flat neoprene washers and 4 solid brass screws in a plastic box.
M0676.jpg 200 Beveled washers
Locke Part #: M0676 MFG Part #: W197B Compare
Made of specially compounded neoprene for resistance to hot or cold water. Packed in plastic boxes.
M0676.jpg 200 Flat Washers
Locke Part #: M0685 MFG Part #: W197A Compare
Made of specially compounded neoprene for resistance to hot or cold water. Packed in plastic boxes.
universal-gas-valve-key-18-polished-chrome.jpg 24" Polished Chrome Gas Fireplace Key.
Locke Part #: M1475 MFG Part #: NKY.24 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 24" Length, Use With: 1/4" or 5/16" Gas Valve Stems & Fire Pits, Polish: Chrome
Sold 100 in a pack.
M0400.jpg 25 Lb. Bar of Ingot Lead
Locke Part #: M0400 MFG Part #: INGOT LEAD Compare
25 Lb. bar only.
M0523.jpg 258 Straight Fireplace Valve
Locke Part #: M0523 MFG Part #: 258 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
M0523.jpg 259 Angle Fireplace Valve
Locke Part #: M0595 MFG Part #: 259 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
M1650.jpg 270 Washers With Snap-In Chrome Wire Holders
Locke Part #: M1651 MFG Part #: 291-30126 Compare
SBR (synthetic blended rubber)
Sold 100 in a pack.
M0449.jpg 3" - 6" OD Pipe Roof Flashing
Locke Part #: M0439 MFG Part #: 300-60 Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
p54200.jpg 3" Brass Plug For Extension Cover 3-3/8" OD
Locke Part #: G0264 MFG Part #: P54300 Compare
Size: 3", Outer Dimension: 3-7/16" Countersunk plug tapped 1/4-20, Stainless Steel
T1500a.jpg 3" Clean Seal Plug
Locke Part #: T1501 MFG Part #: 271713 Compare
C0257.jpg 3" Closet Spacer
Locke Part #: C0258 MFG Part #: R383300 Compare
For floor & wall closet bowls. Eliminates the need to chip concrete. Break out for coupling adjustments on off-the-floor closet bowls.
243-45787-00.jpg 3" Draft Hood
Locke Part #: E0535 MFG Part #: 243-45787-00 Compare
Size: 3"
C0032.jpg 3" Flapper for Western Closets
Locke Part #: C0032 MFG Part #: WP3FLAPPER Compare
C0034.jpg 3" Flush valve for Western Closets
Locke Part #: C0034 MFG Part #: WP3FLUSHVALVE Compare
M0435.jpg 3" Lead Boot Flashing
Locke Part #: M0437 MFG Part #: ECONOMY 3" Compare
universal-gas-valve-key-3-polished-chrome.jpg 3" Polished Chrome Gas Fireplace Key.
Locke Part #: M0477 MFG Part #: BF.KY.01 Compare
Warranty: 1-Year limited warranty, Color: Polished Chrome, Type: Zinc, Size: 3" Length Removable key insures you that the valve will not be turned on accidentally.
C0036.jpg 3" Tank Gasket
Locke Part #: C0036 MFG Part #: WP3TTBGASKET Compare
C0198.jpg 3" Universal Flapper
Locke Part #: C0198 MFG Part #: 5403 Compare
The first and only 3 inch universal Flapper. 2 simple adjustments. Silicone seal.
M0002.jpg 3" x 12" 16 Gauge FHA Nail Plate Strap
Locke Part #: M1320 MFG Part #: PS1216-3 6 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg 3" x 18" 16 Gauge 6 Hole
Locke Part #: M0007 MFG Part #: PS 1816-3 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg 3" x 24" 16 Gauge 6 Hole
Locke Part #: M1323 MFG Part #: PS 2416-3 6 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0001.jpg 3" x 5", 16 Gauge
Locke Part #: M1321 MFG Part #: SP516100-3 Compare
Protects water piping, plastic DWV, electrical wire, phone line, etc. from nails or screws, Self nailing
M0002.jpg 3" x 6" 16 Gauge 12 Hole
Locke Part #: M5070 MFG Part #: PS0616-3 Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg 3" x 9" 16 Gauge 12 Hole
Locke Part #: M5071 MFG Part #: PS0916-3 Compare
Extra long protection of mechanical runs., Heavy steel
Aluminum.jpg 3"-4" Aluminum Roof Flashings
Locke Part #: M0413 MFG Part #: AN340 Compare
Warranty: 20 year limited warranty, Color: Mill finish, Type: Aluminum with Premium elastomeric collar Will work on high pitch roof up to 60 .
M0449.jpg 3"-6" Red HI-Temp Flashing
Locke Part #: M2439 MFG Part #: #4 SILICONE RED Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
M0998.jpg 3/4" - 1-1/2" 009/9091" - 1-1/2" 009M2, Air Gap
Locke Part #: M0997 MFG Part #: 0881577 Compare
C0248.jpg 3/4" Brass Closet Spud
Locke Part #: C0254 MFG Part #: 57-0510 Compare
M0931.jpg 3/4" C x C Brass Ball Valve
Locke Part #: M0932 MFG Part #: 94ALF20401A Compare
E0305.jpg 3/4" C x C Expansion Relief Valve
Locke Part #: E0305 MFG Part #: 78RV226125 Compare
3/4" Brass water heater ball valves with 125 Lb. P.S.I. Thermo expansion Relief Valve. Combination 1/2" Copper, sweat & 1/2" threaded outlet fitting on relief valve.
M15.jpg 3/4" Chrome Plated Escutcheon
Locke Part #: M0017 MFG Part #: 162 Compare
M4565.jpg 3/4" Coupling CTS x MIP
Locke Part #: M4565 MFG Part #: 74130-102 Compare
M0027.jpg 3/4" CWT F&C Plate
Locke Part #: M0023 MFG Part #: 281 Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
M1010.jpg 3/4" Double Check
Locke Part #: M1010 MFG Part #: 0063231 Compare
Size: 3/4", Weight: 2 lbs, Body: Bronze, Maximum Working Pressure: 400psi (27.6 bar), Temperature Range: 33˚F – 180˚F (0.5˚C – 82˚C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM, Valve Disc: Elastomer, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa)
BLF9101.jpg 3/4" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1163 MFG Part #: 77FLF10401 3/4" Compare
Item: M1163, Size (in): 3/4, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
E0048.jpg 3/4" FIP Anti-Scald
Locke Part #: E0049 MFG Part #: 0559119 Compare
E0375.jpg 3/4" FIP x 3/4" Female Sweat Straight Fitting. 12"
Locke Part #: E0375 MFG Part #: 633-312 Compare
Brass FIP swivel nut includes EPDM gasket
M1517.jpg 3/4" FIP x 3/4" FIP Check Valve
Locke Part #: M1517 MFG Part #: CVNL75 Compare
E0305.jpg 3/4" FIP x FIP Expansion Relief Valve
Locke Part #: E0306 MFG Part #: 78RV116125 Compare
3/4" Brass water heater ball valves with 125 Lb. P.S.I. Thermo expansion Relief Valve. Combination 1/2" Copper, sweat & 1/2" threaded outlet fitting on relief valve.
Size: 3/4" FIP x 3/4" Uponor PEX-Barb x 18", Connections: FIP x PEX Barb, Inside Diameter: 3/4"
Size: 3/4" FIP x 3/4" Uponor PEX-Barb x 24", Connections: FIP x PEX Barb, Inside Diameter: 3/4"
M1426.jpg 3/4" IP Tee Handle Ball Valve
Locke Part #: M1426 MFG Part #: 759T04TSLF Compare
M0925.jpg 3/4" IPS Brass Ball Valve
Locke Part #: M0926 MFG Part #: 94ALF10401A Compare
M0027.jpg 3/4" IPS F&C Plate
Locke Part #: M0028 MFG Part #: 1237J Compare
Heavy pattern. 2 holes. Polished chrome plate finish.
Size: 3/4", Weight: 3.5 lbs, Body: Lead Free copper silicon alloy, Maximum Working Pressure: 300psi (20.7 bar), Temperature Range: 33°F – 160°F (0.5°C – 71°C), Integral Strainer: Stainless steel, Diaphragm: Reinforced EPDM with PTFE wetted surface, Valve Disc: EPDM, Adjustable Reduced Pressure Range: 25–75psi (172 – 517 kPa), Standard Reduced Pressure Setting: 50psi (345 kPa), High Pressure Range: 75–125psi
M4505.jpg 3/4" Leather Gaskets
Locke Part #: M4505 MFG Part #: 4124057 Compare
Overall Length: 6-7/8, Temperature Range: -40°F to +212°F(-4.4°C to +100°C), Size (NPT): 3/4" Male X Female Swivel Hose, Normal Operating Pressure: 35 to 125 PSIG, Max Spike Pressure: 250 PSIG 3/4" Male x Female Swivel Hose, Only One Moving Part, Maintenance FREE, Construction:, Cap:, Machined of free turning brass, attached to barrel with 95-5 solder, Piston:, Machined of C 96300 Low Lead Brass, Seals:, EPDM, Seal Lubricant:, Dow-Corning Silicone Compound #111, FDA listed for use in potable water systems, Nickel Plated:, For Salt Water Application
E0260.jpg 3/4" NPT Union Thermostatic Mixing Valve
Locke Part #: E0261 MFG Part #: 34A214T Compare
Dual purpose mixing or diverting valves, Constant water temperature under changing operating conditionsReliable at minimum flow of 0.5 gpm, Nickel-plated brass construction, EPDM O-rings, Straight through design (hot and cold at the same level), Max pressure 150 psi (1034 kPa), Max temperature 212 F (100 C), Tamper resistant design, Valve trapping not required, ASSE, CSA and IAPMO listed
C0187.jpg 3/4" or smaller supply
Locke Part #: C0187 MFG Part #: 45-1412 Compare
Genuine renewal parts
E0260.jpg 3/4" PEX Union Thermostatic Mixing Valve
Locke Part #: E0262 MFG Part #: 34BLF214X Compare
Dual purpose mixing or diverting valves, Constant water temperature under changing operating conditionsReliable at minimum flow of 0.5 gpm, Nickel-plated brass construction, EPDM O-rings, Straight through design (hot and cold at the same level), Max pressure 150 psi (1034 kPa), Max temperature 212 F (100 C), Tamper resistant design, Valve trapping not required, ASSE, CSA and IAPMO listed
E0375.jpg 3/4" PEX x 3/4" FIP Swivel. 18"
Locke Part #: E1699 MFG Part #: 633x18 Compare
Brass FIP swivel nut includes EPDM gasket
E1168.jpg 3/4" Pex x Pex Ball Valve / Relief Valve
Locke Part #: E1168 MFG Part #: 78RV996125 / N55601 Compare
Pressure Rated: 400psi. Relief Valve, Pressure Settings: 75, 80, 100 or 125psi.
M1015.jpg 3/4" Pressure Breaker
Locke Part #: M1015 MFG Part #: 0792011 Compare
M1708.jpg 3/4" Pressure Vacuum Breaker Assembly
Locke Part #: M1709 MFG Part #: 720A 3/4" Compare
Designed for installation on potable water lines to protect against backsiphonage of contaminated water into the potable water supply. Assembly shall provide protection where a potential health hazard exists.
M0999.jpg 3/4" Reduced Pressure Backflow Preventer
Locke Part #: M1000 MFG Part #: 0065372 Compare
E0579.jpg 3/4" Relief valve,150 lb.
Locke Part #: E0579 MFG Part #: 14737-0150 Compare
Can be used on Rinnai & other tankless water heaters. ASME rated, design certified by AGA; CGA listed. NPT male inlet x NPT female (drain) outlet. Pressure range: 150 psi. Standard setting.
M4505.jpg 3/4" Rubber Gaskets / Washers
Locke Part #: M4510 MFG Part #: 4124050 Compare
E0102.jpg 3/4" Shank T&P Valve
Locke Part #: E0102 MFG Part #: 19783-0150 Compare
Thermostat has a thermobonded protective coating. This feature retards the accumulation of mineral deposits. A.S.M.E. rated, self-closing T&P relief valves for water heaters up to 100,000 BTU/hr.
BLF9102.jpg 3/4" Solder Joint Lead Free Forged Brass Ball Valve
Locke Part #: M1173 MFG Part #: 77FLF20401 3/4" Compare
Item: M1173, Size (in): 3/4, Ratings: 600 WOG, End Connections: Solder Joint Assembled from domestic and foreign parts, A forged lead free brass quarter turn ball valve, rated 600 WOG, Solder joint end connections, Two-Piece, full port, Conforms to and is CSA certified to ASME A112.18.1
E0047.jpg 3/4" Sweat
Locke Part #: E0047 MFG Part #: 24502-000 Compare
E1130.jpg 3/4" Sweat
Locke Part #: E1130 MFG Part #: 50413W Compare
Eliminating leak paths in the system, Shortening installation times, Exclusive purge & drain feature, 600 WOG 150 WSP, Prevents electrolysis and eliminates galvanic corrosion, Includes mounting bolts, nuts and an additional wing style T handle, Allows virtually no air into the system upon pump replacement, Fits most circulator pumps, Adjustable packing gland for lifetime protection, Threaded ends comply with ANSI B1.20.1, Solder ends comply with ANSI B16.18, Hose threads comply with B1.20.7, Quick quarter turn ball valve
M1514.jpg 3/4" Swing Check Valve C x C
Locke Part #: M1515 MFG Part #: 521C04LF Compare
200 lb. pressure for water, oil or air. Cast Brass. Main use is to prevent backflow of fluids. C x C
M0514.jpg 3/4" Swing Check Valve IPS
Locke Part #: M0515 MFG Part #: M515 LF Compare
Pipe thread - 125 lb. pressure for water, oil or air, up to 210 F. Brass main use is to prevent backflow of fluids.
E0096.jpg 3/4" T&P Valve
Locke Part #: E0096 MFG Part #: 16935-0150 Compare
E0100.jpg 3/4" T&P Valve With 3" Probe,125 psi; Schools & Gov.
Locke Part #: E0101 MFG Part #: 15914-0125 Compare
E0100.jpg 3/4" T&P Valve With 3/4" Probe, 150 psi
Locke Part #: E0103 MFG Part #: 16372-0150 Compare
E0100.jpg 3/4" T&P Valve With 4" Probe, 150 psi Resident.
Locke Part #: E0100 MFG Part #: 15836-0150 Compare
Product Image Not Available 3/4" T & P Nipple Extender, 2" Total Long
Locke Part #: E0485 MFG Part #: 229-19100-00 Compare
Size: 3/4", Length: 2"
Size: 3/4", Capacity: 105000 BTU/hr, Temperature: 210°F, Pressure Set Point: 150 psi, Stem: 4", Thread Type: Female
E0050.jpg 3/4" Tempering Valve
Locke Part #: E0051 MFG Part #: 0559136 Compare
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable.
E0047.jpg 3/4" Threaded
Locke Part #: E0097 MFG Part #: 24511-0000 Compare
M0999.jpg 3/4" Total rubber parts kit for M1000
Locke Part #: M1132 MFG Part #: 0887787 Compare
E0083.jpg 3/4" Vacuum relief
Locke Part #: E0083 MFG Part #: 0556031 Compare
M0546.jpg 3/4" Water Press. Reduc. Valve
Locke Part #: M0546 MFG Part #: 0009478 Compare
Set at 45 lb. Reduces water pressure in service lines.
M1692.jpg 3/4" Water Pressure Reducing Valve
Locke Part #: M1693 MFG Part #: 70 XL 3/4" Compare
M1030.jpg 3/4" Wye Strainer Kit with Nipple
Locke Part #: M1031 MFG Part #: 0379112 Compare
Protects backflow preventers from foreign debris. Includes wye strainer & nipple.
M4565.jpg 3/4" x 1" Coupling CTS x MIP
Locke Part #: M4564 MFG Part #: 74141-195 Compare
F0580.jpg 3/4" x 3" Dielectric Nipple
Locke Part #: F0580 MFG Part #: 1995C Compare
F0790.jpg 3/4" x 3" I.P. 1 Bolt Style
Locke Part #: F0791 MFG Part #: 330-043 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
F0790.jpg 3/4" x 6" I.P. 2 Bolt Style
Locke Part #: F0826 MFG Part #: 330-046 Compare
Stainless steel bands, neoprene gaskets, plated steel bolts & nuts.
Length (in): 12, Item: E0371, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 15, Item: E0372, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 18, Item: E0373, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 24, Item: E0374, End Connection Size: 3/4” FIP x 3/4” FIP, Temperature Rating: 40° - 250° F, ID (in): 0.72, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 18, Item: E0376, End Connection Size: 3/4” FIP x 7/8” Copper Sweat, Temperature Rating: 35° - 250° F, ID (in): 3/4, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length (in): 24, Item: E0377, End Connection Size: 3/4” FIP x 7/8” Copper Sweat, Temperature Rating: 35° - 250° F, ID (in): 3/4, Working Pressure: 200 Psi, Burst Pressure (Psi): 1850 (Approx.) 304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts
Length: 18", Connections: 1″ FIP x 7/8″ O.D
Literature_HeaderImage-1-2000x550_c.jpg 3/4 EVAPORATIVE COOLER VALVE
Locke Part #: M0485 MFG Part #: 102-194 Compare
3/4" hose thread inlet & outlet. 1/8" female pipe thread side tap to A/C.
M1405.jpg 3/4 IPS White Escutcheon
Locke Part #: M1438 MFG Part #: 921-3W Compare
White Plastic, Shallow.
M1405.jpg 3/4 Nominal White Escutcheon
Locke Part #: M1432 MFG Part #: 920-3W Compare
White Plastic, Shallow.
WB00-12N.jpg 3/4FIP X 3/4FIP X12 COPPER WHC
Locke Part #: L0958 MFG Part #: WB00-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P x 3/4” F.I.P end fittings, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only)
WB07-18.jpg 3/4FIP X 3/4PEX X18 COPPER WHC
Locke Part #: L0008 MFG Part #: WB07-18 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 18, Quantity: 25, Weight (LBS): 20.1 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection
WB07-24_STD.jpg 3/4FIP X 3/4PEX X24 COPPER WHC
Locke Part #: L0006 MFG Part #: WB07-24 Compare
Size: 3/4" F.I.P x 3/4" PEX Barb (brass, pre-torqued), Length (in): 24, Quantity: 25, Weight (LBS): 16.5 Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection
WB034-12N.jpg 3/4FIP X3/4NOM M/FSWT X12 CPR
Locke Part #: L0009 MFG Part #: WB034-12N Compare
Size: 7/8” OD X 12” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
WB034-18N.jpg 3/4FIP X3/4NOM M/FSWT X18 CPR
Locke Part #: L0011 MFG Part #: WB034-18N Compare
Size: 7/8” OD X 18” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
WB034-24N.jpg 3/4FIP X3/4NOM M/FSWT X24 CPR
Locke Part #: L0012 MFG Part #: WB034-24N Compare
Size: 7/8” OD X 24” connector with 3/4” F.I.P fitting x 3/4” Nom. Male/Female Sweat, Operating Temperature: 40° - 180° F (NSF61 maximum 82° C), Pressure: water pressures up to 125 psi maximum Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply
M15.jpg 3/8" Chrome Plated Escutcheon
Locke Part #: M0015 MFG Part #: M15-2000PCS Compare
M660.jpg 3/8" Closet Supply
Locke Part #: M0661 MFG Part #: W442 Compare
Step design cone washer for 3/8" lavatory & sink supply.
S1-12DW F_STD.jpg 3/8" COMP X 3/8" COMP 12" DWSH
Locke Part #: B0209 MFG Part #: S1-12DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only
S1-16DL F_STD.jpg 3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0289 MFG Part #: S1-16DL F Compare
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, 100% No Lead, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, For use in potable water distribution systems in accessible locations only, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections
B0323.jpg 3/8" comp. x 3/8" FIP.
Locke Part #: B0323 MFG Part #: 114-102NL Compare
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
No. 9D is for protection against backflow of carbon dioxide gas & carbonated water into the water supply system to vending machines thus eliminating the hazardous reaction of carbon dioxide with copper tubing.
BLF9101.jpg 3/8" Female NPT Lead Free Forged Brass Ball Valve
Locke Part #: M1161 MFG Part #: 77FLF10201 3/8" Compare
Item: M1161, Size (in): 3/8, Ratings: 600 WOG/150 SWP, End Connections: Female NPT Assembled from domestic and foreign parts, A forged brass quarter turn valve, 600 WOG/150SWP rated, Female NPT end connections, Two-Piece, full port, CSA certified to be lead free, and conform to CGA3.16 and ASME B16.33 for gas service
Product Image Not Available 3/8" L Beveled Faucet 100 Pack
Locke Part #: M1615 MFG Part #: W236 Compare
M660.jpg 3/8" Sink & Lavatory
Locke Part #: M0660 MFG Part #: W443 Compare
Step design cone washer for 3/8" lavatory & sink supply.
B0253.jpg 3/8" x 20" Chrome Plated
Locke Part #: B0254 MFG Part #: 283-S04120C00 Compare
Lavatory & basin riser with nosepiece.
B0250.jpg 3/8" x 20" Supply Tube
Locke Part #: B0250 MFG Part #: 283-T25120C00 Compare
Rubber cone. Chrome Plated
B0253.jpg 3/8" x 30" Chrome Plated
Locke Part #: B0257 MFG Part #: 283-S04130C50 Compare
Lavatory & basin riser with nosepiece.
d0352.jpg 3/8” x 24" Riser
Locke Part #: D0352 MFG Part #: 000372-40 Compare
For D0312 & D0313
S1-16DW F_STD.jpg 3/8 CMP X 3/8 CMP X 16" DISH
Locke Part #: B0210 MFG Part #: S1-16DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only
S1-20DW F_STD.jpg 3/8 CMP X 3/8 CMP X 20" DISH
Locke Part #: B0211 MFG Part #: S1-20DW F Compare
Size: 3/8” Compression x 3/8” Compression, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 100% No Lead, For use in potable water distribution systems in accessible locations only
Size: 3/8" Large, Packaging: 100 per box, Outside Diameter: 11/16”
M1730.jpg 3/8 OD Female Comp Tee Lead Free
Locke Part #: M1731 MFG Part #: 660-GTR1B Compare
Size: 3/8” O.D. Female Captive Nut x 3/8” O.D. Compression x 1/4” O.D. Compression, Operating Temperature: 40°- 180°F at Maximum Operating Pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, For use with instrumentation, hydraulic and pneumatic systems., Compliant to California, Vermont and Maryland low-lead requirements, Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing,, Compliant product CSA approved to California Health & Safety Code 116875,Vermont Bill S.152 and Maryland House Bill 372 (Project # 234795)
Size: 3/8” O.D. Female Captive Nut x 3/8” O.D. Compression x 3/8” O.D. Compression, Operating Temperature: 40°- 180°F at Maximum Operating Pressures, Vibration: Fair vibration resistance Little to no tube preparation. Compression fittings do not require flaring, soldering or other types of tube preparation, For use with instrumentation, hydraulic and pneumatic systems., Compliant to California, Vermont and Maryland low-lead requirements, Designed for use with aluminum, copper and plastic tubing. Not intended for use with steel tubing,, Compliant product CSA approved to California Health & Safety Code 116875,Vermont Bill S.152 and Maryland House Bill 372 (Project # 234795)
T119.jpg 3’ Extension Hose, Fits T0113
Locke Part #: T0121 MFG Part #: 274038 Compare
P-1610.jpg 3” J-Hook with Nail
Locke Part #: M1442 MFG Part #: 33742 Compare
Case Quantity: 100, Item: M1442, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
p54200.jpg 3-1/2" Brass Plug For Extension Cover 3-7/8" OD
Locke Part #: G0265 MFG Part #: P54-350 Compare
Size: 3-1/2", Outer Dimension: 3-7/8" Countersunk plug tapped 1/4-20, Stainless Steel
C0226.jpg 3-1/2" Closet Bolts; 1 pair
Locke Part #: C0228 MFG Part #: 427-PB Compare
These Waste Valves Are Used On Scullery Type Sinks. They Eliminate Getting Your Hands In The Water To Drain The Sink Bowls. This Provides Safety From Burns And Chemicals.
d0298.jpg 3-1/2" x 2" Outlet Twist Lever Sink Waste Valve
Locke Part #: D0299 MFG Part #: B-3952 Compare
These Waste Valves Are Used On Scullery Type Sinks. They Eliminate Getting Your Hands In The Water To Drain The Sink Bowls. This Provides Safety From Burns And Chemicals.
M674.jpg 3-1/4" x 2-1/4" Solid Tank-to-Bowl Gasket
Locke Part #: M0703 MFG Part #: 2096 Compare
Description Ext.: F/ PUSH ON SPRAY HOSE, Pricing Category: ADPT, Stock or OAN: s, DELTA FAUCET Model Number: RP13938, DELTA FAUCET Description: Delta: O-Ring, Case Quantity: 1, Series: Other
M0002.jpg 3.5" x 18" 16 Gauge 16 Hole
Locke Part #: M1299 MFG Part #: PS1816-3.5 Compare
Extra long protection of mechanical runs., Heavy steel
D138.jpg 32" x 21" For Cast Iron Sinks
Locke Part #: D0145 MFG Part #: 1S4P2132 Compare
1-1/2" Radius.
D138.jpg 32" x 21" For Steel Sinks
Locke Part #: D0140 MFG Part #: 1S42132 Compare
1-1/2" Radius.
E0105.jpg 3500W 240V
Locke Part #: E0112 MFG Part #: 265-42545-12 Compare
For Flanged Elements:
E0807.jpg 37C72U-706 LPG 1-3/8"
Locke Part #: E0809 MFG Part #: 265-46182-01 Compare
E0807.jpg 37C73U-704 NG 1-3/8"
Locke Part #: E0807 MFG Part #: 265-46181-01 Compare
p54200.jpg 4" Brass Plug For Extension Cover 4-1/2" OD
Locke Part #: G0266 MFG Part #: P54400 Compare
Size: 4", Outer Dimension: 4-1/2" Countersunk plug tapped 1/4-20, Stainless Steel
T1500a.jpg 4" Clean Seal Plug
Locke Part #: T1502 MFG Part #: 271721 Compare
C0257.jpg 4" Closet Spacer
Locke Part #: C0257 MFG Part #: R383400 Compare
For floor & wall closet bowls. Eliminates the need to chip concrete. Break out for coupling adjustments on off-the-floor closet bowls.
M0435.jpg 4" Lead Boot Flashing
Locke Part #: M0438 MFG Part #: ECONOMY 4" Compare
C0237.jpg 4" x 5" Copper Float Ball
Locke Part #: C0246 MFG Part #: 142 Compare
M718.jpg 4’ Washing Machine Hose
Locke Part #: M0717 MFG Part #: 464 Compare
M0407.jpg 4’ x 4’ Reddi-But Lead Pans
Locke Part #: M0407 MFG Part #: 4# 4' X 4' Compare
4 lbs. per square ft.
M0407.jpg 4’ x 6’ Reddi-But Lead Pans
Locke Part #: M0409 MFG Part #: 4# 4' X 6' Compare
4 lbs. per square ft.
P-1610.jpg 4” J-Hook with Nail
Locke Part #: M1443 MFG Part #: 33743 Compare
Case Quantity: 75, Item: M1443, UOM: EA Strong and rigid I-Beam design., Supports drain-waste and vent piping from joists and rafters., Two captive nails and nail holes on all four sides, Made of corrosion-proof, high-impact ABS
G0060.jpg 4-3/8" x 1-1/4" Prime-Rite Trap Primer Valve
Locke Part #: G0060 MFG Part #: 695-01 Compare
Dimensions: 4-3/8" x 1-1/4", Inlet: 1/2" NPT Male, Outlet: 1/2" NPT Female, Operating Range: 20 to 80 PSIG No Adjustment Required, Automatically Maintains a Constant Water Seal in Floor Drain Traps., Best for Use with Low Flow Fixtures, One Model for One to Four Drain Traps, Contains: No Springs, Diaphgrams, or plastic parts and uses #60 Mesh Stainless Steel Screen.
52102-MB.jpg 4-Setting Shower Head, Chrome, 6/Case
Locke Part #: A0294 MFG Part #: 52102-MB Compare
Finish: Chrome, Flow Rate: 2.50 gpm @ 80 psi, 9.5 L/min @ 550 kPa, Description Ext.: CHROME, Pricing Category: ALU2, Stock or OAN: s, DELTA FAUCET Model Number: 52102-MB, DELTA FAUCET Description: Delta: 4-Setting Shower Head, Case Quantity: 6, Series: Universal Showering Components Touch-Clean Spray Holes, Metal ball connector, 3 diameter spray face, Spray Settings - Full Body Spray, Fast Massage, Full Spray w/ Massage, Pause, Warranty:, Lifetime faucet and finish warranty
229-39625-25.jpg 43-1/2" Dip Tube with 3" Nipple, Polypropylene
Locke Part #: E0874 MFG Part #: 229-51230-21 Compare
Length: 43-1/2", Nipple Size: 3"
224-47776-06.jpg 44" Magnesium Anode Rod with 2" Nipple
Locke Part #: E0409 MFG Part #: 224-47776-06 Compare
Material: Magnesium, Length: 44"
M0523.jpg 44 Chrome Flange for M0595
Locke Part #: M0895 MFG Part #: 44 Compare
1/2" FIP gas log lighter valves. Chrome flange with 2-1/4" key. Designed to hold pressure test. Competitive price.
E0113.jpg 4500W 240V
Locke Part #: E0056 MFG Part #: 265-51328-07 Compare
Sand and Lime Fighter Element For Flanged Elements:
E0114.jpg 4500W 240V
Locke Part #: E0115 MFG Part #: 265-51333-09 Compare
For Flanged Elements:
Type: Ultra LWD, Qty: 6, Nominal Voltage: 240v, Min Tank Diameter: 15", Watts @ 240v: 4500w, Watts @ 208v: 3500w Features, :, Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty
Features, :, 1-3/8" thread screw-in style, For the State Industries manufactured Duron tank water heaters, Also used in Sears Duron tank water heaters
This 47mm faucet valve cartridge is a direct replacement for the American Standard Reliant + or Ceramix one handle faucets., This durable ceramic disc valve cartridge by American Standard, has 3 holes to accommodate volume and temperature mixing for a single control faucet.
M0449.jpg 5" - 9" OD Pipe Roof Flashing
Locke Part #: M0450 MFG Part #: 500-90 Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
M715.jpg 5" Force Cup Plunger
Locke Part #: M0715 MFG Part #: 57-0100 Compare
G0260.jpg 5" Wall C.O. Cover
Locke Part #: G0260 MFG Part #: 1842-C Compare
Size: 5" A = Pipe Size, 1-1/4", 1-1/2", 2", 5", 2-1/2", 3", 3-1/2", 4", 7", 5", Extension cover puts the finishing touches to wall clean-outs, and can be painted or papered to match wall. Wall mount - 24 gauge, stainless steel.
M0002.jpg 5" x 18" 16 Gauge 8 Hole
Locke Part #: M1322 MFG Part #: PS1816-5 8 HOLE Compare
Extra long protection of mechanical runs., Heavy steel
M0002.jpg 5" x 8" 16 Gauge Boca 6 Hole
Locke Part #: M0005 MFG Part #: PS 5816 Compare
Extra long protection of mechanical runs., Heavy steel
M0449.jpg 5"-9" Red HI-Temp Flashing
Locke Part #: M2450 MFG Part #: #6 SILICONE RED Compare
Ideal for corrugated metal roofs. Pipe diameter markings.
C0219.jpg 5/16" x 2-1/2" Closet Screws
Locke Part #: C0221 MFG Part #: C221 Compare
C0222.jpg 5/16" x 2-1/4" Bolts
Locke Part #: C0224 MFG Part #: C224 Compare
C4010.jpg 5/16" x 2-1/4" Bolts
Locke Part #: C4010 MFG Part #: 73065 Compare
Toes on underside of the foot prevent movement after installation.
C4010.jpg 5/16" x 3-1/2" Bolts
Locke Part #: C4011 MFG Part #: 73070 Compare
Toes on underside of the foot prevent movement after installation.
M0719.jpg 5/8" ID x 50’ Black Hose
Locke Part #: M0719 MFG Part #: A220 Compare
M15.jpg 5/8" OD for 1/2" Copper
Locke Part #: M0022 MFG Part #: 168 Compare
M4531.jpg 5/8" x 3/4", 7" High Meter Setter With Mac Pak 3/4" CTS Tube Compression
Locke Part #: M4531 MFG Part #: 22-207WX22 33 5/8 X3/4 Compare
M4531.jpg 5/8" x 3/4" Meter,7" Height Basic Setter
Locke Part #: M4563 MFG Part #: 74134-120 Compare
T Comp. or 3T Comp. - bottom inlet/outlet, Angle Ball Valve - top inlet, Meter Nut top outlet
WaterFlowMeter.jpg 5/8" x 3/4" Water Meter Lead Free
Locke Part #: M4545 MFG Part #: WM-75 5/8" X 3/4" Compare
Dimension: 5/8"x3/4", Weight (lbs): 4.25, Flow Rating (gpm): 20, Continuous Flow (gpm): 10, Normal Flow Range (gpm): 1-20, Low Flow (gpm @ > 97%): 1/4, Extended Low Flow (gpm @ > 95%): 1/8, Maximum Working Pressure (psi): 150, Maximum Working Temperature (°F): 105, Specific Displacement (revs/gallon): 56.4/1, Headloss at Maximum Flow Rate (psi): 6.5, Length (A ): 7.5", Width (B ): 3-13/16", Height Standard Register with lid (C ): 5-3/8", Height Bottom to Center Line (D): 1-5/8", Packed To Carton: 6, Carton Weight (lbs): 30 Hermetically sealed dry dial protected from the elements, won't discolor or fade, Proven multi-jet water meter design, Connections are external non-tapered meter threading (comes with Male NPT thread adapters), Integral strainer in measuring chamber protects measuring components from foreign debris., Tempered glass lens for continued readability., Hinged lens cover to protect lens and register from damage. Magnetic drive to eliminate potential leak point., Easy to read register display with large clear digits., Odometer measures in gallons up to 9,999,999(99,999,999 for WM150/200).
M720A.jpg 5’ Universal Drain Hose
Locke Part #: M0720 MFG Part #: J04016 Compare
Can be cut at any section to fit 3/4", 7/8" or 1" drain.
M718.jpg 5’ Washing Machine Hose
Locke Part #: M0718 MFG Part #: 465 Compare
M415.jpg 5’ x 40’ Polyeth. Shower Liner
Locke Part #: M0417 MFG Part #: 41626 Compare
Used for shower pans, floor drain flashings and concealed waterproofing. Accepted by FHA and HUD.
M0416.jpg 5 Lb. Box of Lead Wool
Locke Part #: M0416 MFG Part #: 5#BAG LEAD WOOL Compare
M0419.jpg 5 Lb. Box of Oakum Rope
Locke Part #: M0419 MFG Part #: 2898 Compare
27" cut lengths.
C0232.jpg 5-1/2" lower lift wire
Locke Part #: C0233 MFG Part #: 96 Compare