Loading ...

Loading ...

Search in: Pumps, Tanks & Sprinklers Category

S0050.jpg .3HP Sump Pump
Locke Part #: S0050 MFG Part #: 506158
LITTLE GIANT
S0181.jpg 0-100# Pressure Gauge, 3-1/2" face
Locke Part #: S0181 MFG Part #: 1753
1/4 " MPT. PASCO SPECIALTY & MFG INC
Voltage: 24 VAC, 50/60 Hz Solenoid, Material: Plastic, Valve Type: Anti-Siphon, Operating Pressure: 15 to 150 psi, Flow Range: 0.2 to 30 gpm, Operating Temperature (Ambient Temperature): 125°F, Operating Temperature (Minimum Water and Ambient Air Temperature: 40°F, Operating Temperature (Water Temperature): 110°F, Valve Inlet/Outlet Configuration: NPT Female x NPT Female Threaded, Valve Size: 1", Center of Inlet to Center of Outlet: 4.47", Dimensions LxWxDxH: 7.6" x 3" x3" x 6.1", Valve Series: JTV Anti-Siphon (above ground) mounting, 1 in. female threaded inlet and outlet (use 1 in. MPT threaded pipe adapters with Teflon tape), Jar-Top bonnet simplifies cleaning and maintenance, Flow control allows adjusting flow to the zone, optimizing sprinkler performance, 24 VAC, 50/60 Hz automatic operation or manual activation with bleed screw, Buna-N diaphragm offers superior performance in harsh water environments, External bleed to manually flush system of dirt and debris prior to installation and system start-up, Spray-free internal bleed for manual operation, Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability, Heavy duty construction with stainless steel screws, Electrical Specifications:, Inrush - .30 amp, Holding - .19 amp RAIN BIRD CORP
Size: 1", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
Voltage: 24 VAC, 50/60 Hz Solenoid, Material: Plastic, Valve Type: Inline, Operating Pressure: 15 to 150 psi, Dimensions HxWxD: 5" x 4.75" x 3.37", Flow Range: 0.2 to 40 gpm, Operating Temperature (Ambient Temperature): 125°F, Operating Temperature (Minimum Water and Ambient Air Temperature: 40°F, Operating Temperature (Water Temperature): 110°F, Valve Inlet/Outlet Configuration: NPT Female x NPT Female Threaded, Valve Size: 1" 1 in. female pipe thread inlet and outlet inline irrigation valve, Buna-N diaphragm offers superior performance in harsh water environments, Reliable, non-clogging design, Reverse Flow design reduces stress on diaphragm for dependable operation, In-line design minimizes pressure loss of dirt and debris during installation and system start-up, Operates automatically or manually with manual bleed screw, Works with any standard sprinkler timer, Designed for below-ground installation, out of sight and away from playful hands, Energy efficient, low power encapsulated solenoid with captured plunger, Inrush: .30 amp, Holding: .19 amp RAIN BIRD CORP
MBNL200.jpg 1" No-Lead Brass Pitless Adapter 400#
Locke Part #: S0065 MFG Part #: MBNL200
0 - 100 psi. MERRILL MFG 642367123888
Solid brass construction. Short lets tapped with 2-1/4" taps. Top of crosstapped 1/2" FIP, 11". 3/4" FIP x 1" MIP. MERRILL MFG 642367417482
CVMNL100.jpg 1" No-Lead Bronze Submersible Check Valve
Locke Part #: S0075 MFG Part #: CVMNL100
For Submersible Pumps. MERRILL MFG 642367089412
Pricing Category: SR01, Stock or OAN: s, Width: 3-1/4", Height: 7-1/4", Length: 5-1/2", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: GLOBE ANGLE CONFIGURAT, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 150 GPM, Flow without PRS-D option: 2 to 150 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
Model: Remote Control Valve, Pricing Category: SR01, Stock or OAN: s, Width: 3-1/3", Height: 4-1/2", Length: 4-3/8", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: REMOTE CONTROL SL X SL, Coil Resistance: 42-55 Ohms, Holding Current: 0.19 A at 60 Hz, Inrush Current: 0.30 A at 60 Hz, Ambient Air Temperature: Up to 125°, Optional Configuration: Slip x Slip Double-filtered pilot-flow design for maximum reliability., Balanced-pressure diaphragm for long life., External bleed to manually flush system of dirt and debris during installation and system start-up., Internal bleed for spray-free manual operation., Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter., Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring., Operates in low-flow and Xerigation applications when the RBY filter is installed upstream., 1.25" (3,2 cm) stainless steel phillips head screws., Accepts latching solenoid for use with Rain Bird battery-operated controllers., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current, Solenoid coil resistance: 38 Ohms, Available as 1 (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations RAIN BIRD CORP
Model: Remote Control Valve, Pricing Category: SR01, Stock or OAN: s, Width: 3-1/3", Height: 5-3/5", Length: 4-3/8", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: REMOTE CONTROL SL X SL, Coil Resistance: 42-55 Ohms, Holding Current: 0.19 A at 60 Hz, Inrush Current: 0.30 A at 60 Hz, Optional Feature: Flow Control, Ambient Air Temperature: Up to 125°, Optional Configuration: Slip x Slip Double-filtered pilot-flow design for maximum reliability., Balanced-pressure diaphragm for long life., External bleed to manually flush system of dirt and debris during installation and system start-up., Internal bleed for spray-free manual operation., Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter., Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring., Operates in low-flow and Xerigation applications when the RBY filter is installed upstream., 1.25" (3,2 cm) stainless steel phillips head screws., Accepts latching solenoid for use with Rain Bird battery-operated controllers., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current, Solenoid coil resistance: 38 Ohms, Incorporates all features of DV Series valves, Unique, easy-to-turn pressure-assisted flow control mechanism, Available as 1 (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations RAIN BIRD CORP
RBHTNL7510.jpg 1" x 1" x 3/4" No-Lead Bronze Hydrant Tee
Locke Part #: R0596 MFG Part #: RBHTNL7510
MERRILL MFG 642367125349
S75.jpg 1"FIP x 1-1/4"MIP Check Valve
Locke Part #: S0074 MFG Part #: CVMNL125
For Submersible Pumps. MERRILL MFG
SB-CPLG.jpg 1/2" Barb x 1/2" Barb Coupling
Locke Part #: S0291 MFG Part #: A46006
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: COUPLING RAIN BIRD CORP
SB-TEE.jpg 1/2" Barb x 1/2" Barb x 1/2" Barb Tee
Locke Part #: S0298 MFG Part #: A46004
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi Fittings are made of robust acetal material to make connecting swing pipe fast and easy., Easy twist-in insertion - no glue or clamps needed for installation., Aggressive barb lip makes a secure connection that is less likely to leak., Broad range of shapes and sizes allow the contractor to choose the best fitting for the application., Extended length and aggressive barb lip prevent blow outs, reducing likelihood of contractor call backs. RAIN BIRD CORP
SBFE-050.jpg 1/2" F NPT x 1/2" Barb Elbow
Locke Part #: S0297 MFG Part #: A46015
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ELBOW RAIN BIRD CORP
SBA-050.jpg 1/2" M NPT x 1/2" Barb Adapter
Locke Part #: S0296 MFG Part #: A46003
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ADAPTER RAIN BIRD CORP
SBE-050.jpg 1/2" M NPT x 1/2" Barb Elbow
Locke Part #: S0292 MFG Part #: A46010
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ELBOW RAIN BIRD CORP
Pricing Category: SR02, Stock or OAN: s, Length: 500’, Pressure: 0 to 60 psi, Outside Diameter: 0.705", Inside Diameter: 0.615", Wall Thickness: 0.045", Description2: PURPLE STRIPE TUBING High quality, flexible tubing for use in any low-volume irrigation system, 1/2" blank tubing extruded from polyethylene resin materials for consistent durability., UV-resistant for installations at or below grade., Available in green or purple stripe patterns to differentiate zones., Compatible with Easy Fit Compression Fittings or standard 700 series compression fittings., Compact coils for easy storage and shipping. RAIN BIRD CORP
37114.jpg 1/2" x 3/4" x 6" Cut-Off Riser
Locke Part #: S0295 MFG Part #: RISERCO075
Size: 1/2" x 3/4"x 6" Flexible plastic composition allows constant bending without breaking, Durable polyethylene construction, Cut riser to desired length, Connect underground pipe to sprinkler heads, Not for use under continuous pressure, For outdoor use with cold water only RAIN BIRD CORP
37069.jpg 1/2" x 6" Cut-Off Riser
Locke Part #: S0294 MFG Part #: RISERCO6
Size: 1/2" x 6" Flexible plastic composition allows constant bending without breaking, Cut riser to desired length, Connect underground pipe to sprinkler heads, Not for use under continuous pressure, For outdoor use with cold water only RAIN BIRD CORP
S0164.jpg 1/2 H.P. Jet Pump
Locke Part #: S0164 MFG Part #: 8650
MCDONALD, A.Y.
S189.jpg 1/2 HP, 115 Volt
Locke Part #: S0144 MFG Part #: 6618-118
For Submersible Pumps MCDONALD, A.Y.
S189.jpg 1/2 HP, 230 Volt
Locke Part #: S0189 MFG Part #: 6618-119
For Submersible Pumps MCDONALD, A.Y.
S0320.jpg 1/2 HP Booster Pump
Locke Part #: S0320 MFG Part #: 17035R020PC1
MCDONALD, A.Y.
S166.jpg 1/2 HP Capacitor
Locke Part #: S0166 MFG Part #: 6617-381
230 Volts MCDONALD, A.Y.
S0147.jpg 1/2 HP Ejector Package
Locke Part #: S0147 MFG Part #: 651JP
Ejector package includes: Ejector, Nozzle, Venturi, Gasket, Bolts, Washers and Cast Iron Casting. MCDONALD, A.Y.
S0148.jpg 1/2 HP Ejector Package
Locke Part #: S0148 MFG Part #: 7508JP
Ejector package includes: Ejector, Nozzle, Venturi, Gasket, Bolts, Washers, Foot Valve & Cast Iron Casting. MCDONALD, A.Y.
S140.jpg 1/2 HP SUB PUMP 115V 3WIRE PLA
Locke Part #: S0143 MFG Part #: 22050K3A
Volts: 115, HP: 1/2, Phase: 1Ph, 3wire, Stages: 8, Discharge: 1-1/4" A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
S140.jpg 1/2 HP SUB PUMP THERMOPLASTIC
Locke Part #: S0140 MFG Part #: 22050K3
Volts: 230, HP: 1/2, Phase: 1Ph, 3wire, Stages: 8, Discharge: 1-1/4" A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available 1/2 HP SUB PUMP W/CONTROL BX
Locke Part #: S0175 MFG Part #: 21050K3
Volts: 230, HP: 1/2, Phase: 1Ph, 3wire, Stages: 9, Discharge: 1-1/4" A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available 1/2 HP SUBMERSIBLE PUMP 2 WIRE
Locke Part #: S0159 MFG Part #: 21050K2
Volts: 230, HP: 1/2, Phase: 1Ph, 3wire, Stages: 9, Discharge: 1-1/4" A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
S0071.jpg 1/3 HP Sump Pump
Locke Part #: S0071 MFG Part #: 5033CVSP
5033CVSP PERFORMANCE CHART, Total Dynamic Head (Ft), 10, 15, 20, 25, Gallons Per Minute, 40, 34, 28, 22, 12 MCDONALD, A.Y.
S199.jpg 1/4" Snifter Valve
Locke Part #: S0199 MFG Part #: SVNL250
MERRILL MFG
S0049.jpg 1/6 HP Pump
Locke Part #: S0049 MFG Part #: 505000
LITTLE GIANT
E1146.jpg 1” Sweat isolation Flange
Locke Part #: E1156 MFG Part #: 0068096
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG. Watts Regulator
E1146.jpg 1” Threaded isolation Flange
Locke Part #: E1154 MFG Part #: 0068091
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG. Watts Regulator
S189.jpg 1 HP,230 Volt
Locke Part #: S0191 MFG Part #: 6617-111
For Submersible Pumps MCDONALD, A.Y.
S140.jpg 1 HP SUB PUMP THERMOPLASTIC
Locke Part #: S0142 MFG Part #: 22100K3
Volts: 230, HP: 1, Phase: 1Ph, 3wire, Stages: 14, Discharge: 1-1/4" A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available 1 HP SUB PUMP W/CONTROL BX
Locke Part #: S0184 MFG Part #: 21100K3
Volts: 230, HP: 1, Phase: 1Ph, 3wire, Stages: 15, Discharge: 1-1/4" A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available 1 HP SUBMERSIBLE PUMP 2 WIRE
Locke Part #: S0161 MFG Part #: 21100K2
Volts: 230, HP: 1, Phase: 1Ph, 3wire, Stages: 15, Discharge: 1-1/4" A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Size: 1-1/2", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
S0197.jpg 1-1/2" Check Valve
Locke Part #: S0197 MFG Part #: SPCV150
1-1/2" MPT inlet x Barb discharge. Durable thermoplastic body. Eliminates back flow. Sonic welded. Stainless Steel Clamps. MERRILL MFG
Size: 1-1/2", Weight: 2.5 lbs, Maximum Working Pressure: 600psi (41.4 bar) WOG, End Connection: 1/4 NPT Threaded, Maximum Temperature: 406°F (208°C) at 100psi (6.9 bar) Watts Regulator
Pricing Category: SR01, Stock or OAN: s, Width: 3-1/2", Height: 8", Length: 6-3/4", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: GLOBE ANGLE CONFIGURAT, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 150 GPM, Flow without PRS-D option: 2 to 150 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
E1146.jpg 1-1/2” Sweat isolation Flange
Locke Part #: E1148 MFG Part #: 0068098
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG. Watts Regulator
S189.jpg 1-1/2 HP,230 Volt
Locke Part #: S0193 MFG Part #: 6617- 428
For Submersible Pumps MCDONALD, A.Y.
Size: 1-1/4", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
S0062.jpg 1-1/4" Discharge Kit
Locke Part #: S0062 MFG Part #: 599303
24' Hose LITTLE GIANT
0 - 100 psi. MERRILL MFG 642367124458
S57.jpg 1-1/4" or 1-1/2" Sewage Pump Valve
Locke Part #: S0057 MFG Part #: 2063 1 1/4" - 1 1 /2"
Sump Pump Check Valve (1-1/4 x 1-1/2) Pipe Hose Connection, Sewage Pump Check Valve (2 x 2) Pipe Hose Connection, Sewage Pump Basin (18 x 30) With (2 x 2) Split Cover MCDONALD, A.Y.
S75.jpg 1-1/4"FIP x 1-1/4"MIP Check Valve
Locke Part #: S0078 MFG Part #: CVMNL1252
For Submersible Pumps. MERRILL MFG
E1146.jpg 1-1/4” Sweat isolation Flange
Locke Part #: E1149 MFG Part #: 0068097
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG. Watts Regulator
E1146.jpg 1-1/4” Threaded isolation Flange
Locke Part #: E1146 MFG Part #: 0068092
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG. Watts Regulator
S0206.jpg 10/3 PVC Pump Cable
Locke Part #: S0206 MFG Part #: 44011603005
KALAS MFG INC
Color: Blue, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Blue, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Blue, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
15-VAN.jpg 10 to 12 feet Variable Arc Spray Nozzles
Locke Part #: S0444 MFG Part #: P1001201
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: VARIABLE ARC NOZZLE, Radius: 10 to 12 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters. RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
S0181.jpg 100# Pressure Gauge, 2" Face
Locke Part #: S0180 MFG Part #: PGNL100
1/4 " MPT. MERRILL MFG
Size: 100’ coil, Pricing Category: SR02, Stock or OAN: s, Inside Diameter: 0.49", Description2: PIPE Superior flexibility allows pipe to be efficiently routed around hardscape, terraces, and uneven terrain to turn landscape design into reality., Textured surface makes product easier to handle, contributing to labor efficiency, especially under wet conditions., Up to 30% more flexible than competitors., Enhanced kink resistance., Quick and easy installation lowers material and labor costs, Installs quickly leaving time for additional system installations and incremental revenue opportunities., Operating pressure up to 80 psi (5, 5 bar) and 110 F (43 C). RAIN BIRD CORP
Pricing Category: SR01, Stock or OAN: s, Width: 4", Height: 6-1/2", Length: 4", Pressure: 20 to 200 psi, Temperature: Up to 150° F, Description2: VALVE 24V, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 200 GPM, Flow without PRS-D option: 0.25 to 200 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
MERRILL MFG 642367027360
S0040.jpg 115 Volt 3-1/2 gal. Compact Drainosaur
Locke Part #: S0042 MFG Part #: 506065
LITTLE GIANT
S0040.jpg 115 Volt 5 gallon Drainosaur
Locke Part #: S0040 MFG Part #: 506055
LITTLE GIANT
E0294.jpg 115V, 1/12HP, Brass 1 Speed Pump 26gpm
Locke Part #: E0316 MFG Part #: 98961756
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
E0294.jpg 115V, 1/6HP, Brass 1 Speed Pump 26gpm
Locke Part #: E0317 MFG Part #: 98961762
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
LITTLE GIANT
E0294.jpg 115V 3 Speed Stainless Steel, 1/12 HP
Locke Part #: E0295 MFG Part #: 59896781
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
E0294.jpg 115V Stainless, 1/25HP, 12 GPM
Locke Part #: E0307 MFG Part #: 59896775
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
S0171b.jpg 12/3 1000' Spool of PVC Cable
Locke Part #: S0171 MFG Part #: 44001403999
KALAS MFG INC
S0206.jpg 12/3 PVC Pump Cable
Locke Part #: S0207 MFG Part #: 44011403005
KALAS MFG INC
1804-PRS.jpg 12 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0406 MFG Part #: A44305
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 16", Description2: ONLY 12" POP-UP HEIGHT, Spacing: 3 to 24 feet, Exposed Surface Diameter: 2-1/4" Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets RAIN BIRD CORP
1804-PRS.jpg 12 inch Pop-Up Spray Head with PRS
Locke Part #: S0417 MFG Part #: A50405
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 16", Description2: ONLY W/PRS 12" POP-UP, Spacing: 2.5 to 24 feet, Exposed Surface Diameter: 2-1/4", Optional Feature: 30psi in-stem pressure regulation PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets. RAIN BIRD CORP
Pricing Category: SR04, Stock or OAN: s, Pressure: 25 to 70 psi, Body: 16", Description2: ONLY W/SAM/PRS 12" POPU, Spacing: 3 to 20 feet, Exposed Surface Diameter: 2-1/4" PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money. Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.50 gpm (0.11 m3/h; 1.80 l/m) otherwise, Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Built-in Seal-A-Matic (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site., Even stronger retract spring to accommodate elevation changes up to 14 feet (4,2 m). One of the strongest springs in the industry., Co-molded, pressure-activated, multi-functional wiper seal assures positive seal without excess flow-by which enables more heads to be installed on the same valve., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life. Designed for use with all Rain Bird spray head nozzles., Designed for use with all Rain Bird plastic spray head nozzles., 1/2 (15/21) female threaded inlet RAIN BIRD CORP
Color: Brown, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Brown, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Brown, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
15-VAN.jpg 12 to 15 feet Variable Arc Spray Nozzles
Locke Part #: S0450 MFG Part #: P1001501
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: VARIABLE ARC NOZZLE, Radius: 12 to 15 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters. RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
ESP4ME.jpg 120V 4 Station Base Indoor Controller
Locke Part #: S0466 MFG Part #: F55100
Pricing Category: SR08, Stock or OAN: s, Width: 10.7 in., Depth: 4.4 in., Height: 7.7 in., Operating Voltage: 24VAC 50/60Hz, Output: 25.5 VAC 1A, Description2: UNIT INDOOR MOUNT, Max Operating Temperature: 149°F, Max Coil Holding: 5VA, Max Coil Inrush: 11VA, Station Timing: 1 minute to 6 hours Tailored Watering Schedules:, Extra Simple Programming makes it easy for the crew to meet each landscape s unique needs. With the controller up and running faster than ever before, you ll get more jobs done in less time., Single-Controller Simplicity:, Delay Watering:, Is Mother Nature doing the watering for you Are you having a party and want to make sure the landscape is dry Easily postpone irrigation for up to 14 days. Normal irrigation will resume automatically., Bypass Rain Sensor by Station:, Got a landscaped area under an eave or deck Bypass the rain sensor for that station(s) or for the entire landscape., Seasonal Adjust by Program:, When the seasons change, change with them. Reduce watering down to as little as 5 percent of your scheduled program times or increase it up to 200 percent. Apply to all programs or to each program individually., Total Run Time Calculator by Program:, Calculate the specific amount of time the controller is scheduled to run for a given program. Use it to ensure morning watering is finished before the family wakes up, or reduce your run time to comply with water restrictions., Short Detect/Programming Errors:, The ESP-Me visually notifies you of electrical and programming issues with a bright red LED and scrolling messages across the LCD display., One-Touch Watering:, Need an easy way to turn on the system The ESP-Me offers one-touch watering. With the dial in the AUTO position, just press and hold the right teardrop arrow button., Contractor Default:, Prevent callbacks with Contractor Default. Simply save your programs after setup. If the original watering schedule is overwritten in error, easily restore it in just two steps., User-Friendly Rain Bird Design:, Featuring vibrant colors, an intuitive dial and a bright LCD display, the new ESP-Me is easy on the eyes. And with legendary Extra Simple Programming and the Rain Bird reliability you trust, it s the same easy setup, just better., Input required: 120VAC 10%, 60Hz (International models: 230/240VAC 10%, 50/60Hz), Idle/Off power draw 0.06 amps at 120VAC, Power back-up not required. Nonvolatile memory permanently saves the current programming and a 10 year life lithium battery maintains the controllers time and date during power outages, Seasonal Adjust; 5% to 200%, UL, cUL, CE, CSA, C-Tick, FCC Part 15b, WEEE, S-Mark, IP24 Certifications. RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Height: 1", Pressure: 10 to 60 psi, Inlet: 1/2-inch female threaded, Flow: 1.0 to 2.3 gpm, Spacing: 1 to 3 feet, Top Diameter: 1" UL Listed for direct burial in earth and concrete, it can be used with rebar, water pipe, copper tubing and ground rods up to 2 inch in diameter. RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: VARIABLE ARC NOZZLE, Radius: 14 to 18 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters. RAIN BIRD CORP
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Adjustable Arc, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles RAIN BIRD CORP
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Quarter Circle, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: STRIP 9’ X 18’ NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: STRIP NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: STRIP NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters RAIN BIRD CORP
Pricing Category: SR01, Stock or OAN: s, Width: 6", Height: 8", Length: 6", Pressure: 20 to 200 psi, Temperature: Up to 150° F, Description2: VALVE 24V, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 200 GPM, Flow without PRS-D option: 0.25 to 200 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Specialty, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles RAIN BIRD CORP
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Full Circle, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles RAIN BIRD CORP
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Half Circle, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles RAIN BIRD CORP
Product Image Not Available 18" x 30" Sewage Pump Basin
Locke Part #: S0030 MFG Part #: M324001D8E+C18TSF-O155S
Sump Pump Check Valve (1-1/4 x 1-1/2) Pipe Hose Connection, Sewage Pump Check Valve (2 x 2) Pipe Hose Connection, Sewage Pump Basin (18 x 30) With (2 x 2) Split Cover TOPP INDUSTRIES, INC
Sprinkler Cable.jpg 18/8 Sprinkler Cable, 1000’ Spool
Locke Part #: P2234 MFG Part #: 18-08SOL Irrigation
Voltage: 30, Length (ft): 1000, Conductors: 8, Gauge (AWG): 18 PRIORITY WIRE & CABLE INC
Size: 2", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
Pricing Category: SR01, Stock or OAN: s, Width: 5", Height: 10", Length: 7-3/4", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: GLOBE ANGLE CONFIGURAT, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 150 GPM, Flow without PRS-D option: 2 to 150 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
S57.jpg 2" Sump Pump Check Valve
Locke Part #: S0059 MFG Part #: 2063 2"
Sump Pump Check Valve (1-1/4 x 1-1/2) Pipe Hose Connection, Sewage Pump Check Valve (2 x 2) Pipe Hose Connection, Sewage Pump Basin (18 x 30) With (2 x 2) Split Cover MCDONALD, A.Y.
Product Image Not Available 2 Wire with Ground
Locke Part #: S0169 MFG Part #: 6617-136
MCDONALD, A.Y.
Pop-Up Height: 2-1/2", Dimensions (Body Height): 4-1/2", Nozzle Pattern: Full Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series, Spray Distance: 8’-15’ 2 1/2 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed full-circle pattern (360 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 2-1/2", Dimensions (Body Height): 4-1/2", Nozzle Pattern: Half Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series, Spray Distance: 8’-15’ 2 1/2 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed half-circle pattern (180 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 2-1/2", Dimensions (Body Height): 4-1/2", Nozzle Pattern: Square, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series, Spray Distance: 14’ x 14’ - 23’ x 23’ RAIN BIRD CORP
NORWESCO INC
S0181.jpg 200# Pressure Gauge, 2" face
Locke Part #: S0183 MFG Part #: PGNL200
1/4 " MPT. MERRILL MFG
Pricing Category: SR01, Stock or OAN: s, Width: 6", Height: 8", Length: 6", Pressure: 20 to 200 psi, Temperature: Up to 150° F, Description2: 24V, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 200 GPM, Flow without PRS-D option: 0.25 to 200 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
Color: Blue, Pricing Category: SR06, Stock or OAN: s, Overall Height: 9-3/10”, Pressure: 25 to 60 psi, Description2: SPRINKLER/2045A08NP, Nozzle Size: 08, Flow: 1.5 to 8.4 gpm, Spacing: 22 to 50 feet, Top Diameter: 5”, LA Nozzles: 07LA, 10LA, Precipitation Rate: 0.18 to 0.79 inches per hour (5 to 20 mm/h), Radius: 22 to 45 feet Proven impact drive., Straight-through flow for superior performance in dirty water. Five interchangeable, color-coded MPR nozzles with standard trajectory., Two interchangeable low angle (LA) nozzles., Easy to adjust, easy to service., No tools required to change nozzles., Heavy-duty plastic case with sturdy, reinforced ribbed design. Double-weighted arm for slower rotation and increased distance of throw., Self-flushing inner trip with improved inner trip lever. Powerful reverse action., Adjustable arm spring for low-pressure and low-gallonage operation., Energy efficient, low pressure and low-gallonage operation. 360 Full-circle OR arc adjustable from 20 to 340 ., Precision Jet tube (PJ ) minimizes side splash.Hooded bearing for longer life., Distance control diffuser pin., Multi-function, pressure-activated wiper seal., Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction., Combination 1/2" (15/21) or 3/4" (20/27) bottom inlet.Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down., FP trip for full- or part-circle operation., Side or combination bottom inlet for design flexibility. Side inlet installation is not recommended in freezing climates., Serviceable through the top of the case., Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water., Optional nonpotable cover., Combination 1/2 (15/2 1) or 3/4 (20/2 7) female bottom inlet, 1/2 (15/21) female side inlet, Nozzle outlet trajectory is 23, LA nozzle outlet trajectory is 11, Side inlet installation is not recommended in freezing climates, Optional SAM feature holds back up to 10 feet (3,1 m) of elevation change RAIN BIRD CORP
Volts: 230, HP: 1/2, A: 16.33", B: 9.53", Stages: 11, WT: 28 230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy MCDONALD, A.Y.
Product Image Not Available 21100V3 1 HP 230V 3 WIRE 7 GPM SUB PUMP
Locke Part #: S0201 MFG Part #: 21100V3
Volts: 230, HP: 1, A: 21.77, B: 11.75", Stages: 18, WT: 37 230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy MCDONALD, A.Y.
Product Image Not Available 21150M3 1 1/2 HP 230V SUB PUMP
Locke Part #: S0185 MFG Part #: 21150M3
Volts: 230, HP: 1-1/2HP, A: 19.21", B: 13.62", Stages: 11, WT: 40 1-1/2 HP 230V 3 WIRE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1-1/2 HP, PSI, 50, 100, 150, 200, 250, 300, 400, 500, 550, 600, 650, 700, 750, 800, 850., 900, 37.2, 32.7, 27.8, 20.6, 10.8, 30, 30.8, 25.1, 16.9, 50, 25.6, 17.7, 7.0 MCDONALD, A.Y.
Volts: 230, HP: 1-1/2, A: 27.90, B: 13.62", Stages: 24, WT: 43 230V 3 WIRE** SINGLE PHASE, 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., OUTPUT IN GALLONS PER MINUTE, DEPTH TO WATER, 1/2, HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 12.7, 12.2, 11.5, 11.0, 10.0, 9.3, 8.5, 7.5, 6.0, 5.2, 3.2, 30, 11.1, 10.2, 9.4, 8.6, 7.7, 6.1, 5.3, 3.5, 2.0, 50, 9.7, 8.7, 7.7, 6.2, 5.3, 3.8, 2.1, 1 HP, PSI, 25', 50', 75', 100', 125', 150', 175', 200', 225', 250', 275', 300', 325', 350', 375', 400', 425', 450', 475', 13.0, 12.7, 12.3, 12.0, 11.5, 11.3, 11.0, 10.5, 9.8, 9.5, 9.0, 8.5, 7.7, 7.0, 6.5, 5.5, 4.5, 4.0, 2.2, 30, 12.2, 11.7, 11.5, 11.2, 10.7, 10.0, 9.7, 9.2, 8.7, 7.8, 7.2, 6.7, 5.7, 4.6, 4.1, 3.3, 1.9, 50, 11.7, 11.3, 10.8, 10.1, 9.8, 9.3, 8.8, 7.9, 7.3, 6.8, 5.7, 4.8, 4.3, 3.4, 2.0, 1-1/2, HP, PSI, 50', 100', 150', 200', 250', 300', 350', 400', 450', 500', 550', 600', 650', 13.2, 12.3, 11.7, 11.3, 10.7, 10.0, 9.3, 8.5, 7.5, 6.7, 5.5, 4.2, 3.2, 30, 12.2, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 3.9, 3.0, 50, 11.5, 11.2, 10.5, 9.8, 9.2, 8.3, 7.3, 6.5, 5.3, 4.0, 1.1, yy MCDONALD, A.Y.
E0294.jpg 230V, 1/12HP, Brass 1 Speed Pump 33gpm
Locke Part #: E0318 MFG Part #: 98961739
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
E0294.jpg 230V, 1/6HP, Brass 1 Speed Pump 33gpm
Locke Part #: E0319 MFG Part #: 52722346
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
LITTLE GIANT
LITTLE GIANT
LITTLE GIANT
Depth: 20", Overall Height: 24" NORWESCO INC
602.jpg 24"L × 24"H Green Insulated Pouch
Locke Part #: M1289 MFG Part #: 6 56803 06021 7
Color: Green, Dimensions: 24"L × 24"H, Item: M1289 DEKORRA PRODUCTS
Pricing Category: SR02, Stock or OAN: s, Pressure: 8.5 to 60 psi, Outside Diameter: 0.634", Temperature: Up to 100° F, Inside Diameter: 0.536", Wall Thickness: 0.049", Coil Length: 250 ft., Description2: EMMITER 12" SPACING 250’, Flow: 0.90 GPH, Spacing: 12", Ambient Air Temperature: Up to 125°F, Coil Color: Brown, Required Filtration: 120 Mesh Unique material offers significantly greater flexibility and kink-resis-tance for fast, easy installation., The bend radius for XFD dripline is 3 no matter which way you bend the tube. Other driplines will bend 4 if bending with the natural curve of the coil and only 7 if bending against the natural curve of the coil., Greater flexibility assures design capability of tight curves and spaces., Accepts Rain Bird Easy Fit Compression Fittings, 17mm insert fittings and LOC fittings., Variety of flow rates, spacing and coil lengths provides design flexibility for a number of non- turfgrass applications., The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi., Dual-layered tubing (brown over black or purple over black) provides unmatched resistance to chemicals, algae growthand UV damage. RAIN BIRD CORP
S0070.jpg 3/10 HP Sump Pump
Locke Part #: S0070 MFG Part #: 5030CVSP
5030CVSP PERFORMANCE CHART, Total Dynamic Head (Ft), 10, 15, 20, 25, Gallons Per Minute, 46, 36, 30, 25, 12 MCDONALD, A.Y.
E0294.jpg 3/4" Bronze Union (Compression)
Locke Part #: E0299 MFG Part #: 519851
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
E0294.jpg 3/4" Bronze Union (Threaded)
Locke Part #: E0296 MFG Part #: 519852
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
1/4 " MPT. PASCO SPECIALTY & MFG INC
Voltage: 24 VAC, 50/60 Hz Solenoid, Material: Plastic, Valve Type: Inline, Operating Pressure: 15 to 150 psi, Dimensions HxWxD: 5" x 4.75" x 3.37", Flow Range: 0.2 to 22 gpm, Operating Temperature (Ambient Temperature): 125°F, Operating Temperature (Minimum Water and Ambient Air Temperature: 40°F, Operating Temperature (Water Temperature): 110°F, Valve Inlet/Outlet Configuration: NPT Female x NPT Female Threaded, Valve Size: 3/4" 3/4 in. female pipe thread inlet and outlet inline irrigation valve, Buna-N diaphragm offers superior performance in harsh water environments, Reliable, non-clogging design, Reverse Flow design reduces stress on diaphragm for dependable operation, In-line design minimizes pressure loss of dirt and debris during installation and system start-up, Operates automatically or manually with manual bleed screw, Works with any standard sprinkler timer, Designed for below-ground installation, out of sight and away from playful hands, Energy efficient, low power encapsulated solenoid with captured plunger, Inrush: .30 amp, Holding: .19 amp RAIN BIRD CORP
SBE-075.jpg 3/4" M NPT x 1/2" Barb Elbow
Locke Part #: S0293 MFG Part #: A46011
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ELBOW RAIN BIRD CORP
33DK.jpg 3/4" NPT Double Lug Valve Key
Locke Part #: S0421 MFG Part #: B11801
Size: 3/4", Pricing Category: SR09, Stock or OAN: s, Description2: LUG Key threads into top of quick-coupling valve to provide water access. Available with 3/4double lug assembly with NPT threads. RAIN BIRD CORP
Size: 3/4", Pricing Category: SR09, Stock or OAN: s, Description2: VALVE RUBBER COVER Industrial-strength brass quick-coupling valves for convenient water access., Strong corrosion-resistant stainless steel spring prevents leakage., Thermoplastic cover for durability., Red brass construction for long life and rugged performance. One-piece body design RAIN BIRD CORP
100.jpg 3/4" Straight Valve, Rising Swivel, Red Brass
Locke Part #: M1513 MFG Part #: 100RS-075Y
Arrowhead Brass
E1146.jpg 3/4" Sweat isolation Flange
Locke Part #: E1155 MFG Part #: 0068095
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG. Watts Regulator
E1146.jpg 3/4” Threaded isolation Flange
Locke Part #: E1153 MFG Part #: 0068090
Designed to isolate circulator pumps to facilitate circulator pump replacement or repairs. Feature brass bodies and flanges with bottom loaded blowout proof stem, chrome plated ball and advanced double O-ring stem seal technology. 600psi WOG. Watts Regulator
S100.jpg 3/4 - 1-1/2 Plastic Foot Valve
Locke Part #: S0100 MFG Part #: FVU75150
4 for 1 Foot Valve. Positive Sealing. Corrosion-proof. Strong -withstands pressure of over 200 psi. Self-cleaning. Full flow MERRILL MFG
S0164.jpg 3/4 H.P. Jet Pump
Locke Part #: S0163 MFG Part #: 8670
MCDONALD, A.Y.
S189.jpg 3/4 HP,230 Volt
Locke Part #: S0190 MFG Part #: 6617-110
For Submersible Pumps MCDONALD, A.Y.
S0320.jpg 3/4 HP Booster Pump
Locke Part #: S0321 MFG Part #: 17052R020PC1
MCDONALD, A.Y.
S166.jpg 3/4 HP Capacitor
Locke Part #: S0167 MFG Part #: 6617-264
230 Volts MCDONALD, A.Y.
S0148.jpg 3/4 HP Ejector Package
Locke Part #: S0149 MFG Part #: 7906JP
Ejector package includes: Ejector, Nozzle, Venturi, Gasket, Bolts, Washers, Foot Valve & Cast Iron Casting. MCDONALD, A.Y.
S0147.jpg 3/4 HP Ejector Package
Locke Part #: S0154 MFG Part #: 652JP
Ejector package includes: Ejector, Nozzle, Venturi, Gasket, Bolts, Washers and Cast Iron Casting. MCDONALD, A.Y.
S140.jpg 3/4 HP SUB PUMP THERMOPLASTIC
Locke Part #: S0141 MFG Part #: 22075K3
Volts: 230, HP: 3/4, Phase: 1Ph, 3wire, Stages: 11, Discharge: 1-1/4" A.Y. McDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., COST LESS!! THESE THERMOPLASTIC SUBMERSIBLE PUMPS HAVE MUCH LOWER PRICES THAN THE ALL-METAL PUMPS!, 3 Wire Models, Sizes 1/2, 3/4" And 1 HP, Acetal Impellers, Injection Molded Glass Filled Noryl Motor, Stainless Steel Pump Shell, Polycarbonate Diffusers, Stainless Steel Pump Shaft, Glass Filled Noryl Check Valve Standard, Powered by NEMA approved stainless steel motors with built-in lightning protection, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available 3/4 HP SUB PUMP W/CONTROL BX
Locke Part #: S0176 MFG Part #: 21075K3
Volts: 230, HP: 3/4, Phase: 1Ph, 3wire, Stages: 12, Discharge: 1-1/4" A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
Product Image Not Available 3/4 HP SUBMERSIBLE PUMP 2 WIRE
Locke Part #: S0160 MFG Part #: 21075K2
Volts: 230, HP: 3/4, Phase: 1Ph, 3wire, Stages: 12, Discharge: 1-1/4" A.Y. MCDonald offers a full line of 4" submersibles ranging from 3hp through 15hp. Our submersibles offer peak capacity performance in 5, 7, 10, 13, 18, 25, 35, 50, 75 & 90 GPM throughout the range of low to high leads., All 4" submersibles are supplied w/ grounded leads meeting the National Electrical Code (NEC) specifications., 3 Wire single phase models include pump, motor, 48" leads, control box and check valve., 2 Wire single phase models include pump, motor, 48" leads, and check valve., 3 Wire three phase models include pump, motor, 48" leads, magnetic starter, heaters and check valve., Sizes 3hp to 3hp, 1 piece replacement cartridge and completely field serviceable, easier to service for minimal down-time, Powered by NEMA approved stainless steel motors with built-in lightning protection, 2 wire models up to 1-1/2hp; 3 wire models up to 3 HP, Rubber bearing - maximum abrasion resistance while maintaining shaft alignment, Tough, lightweight acetal impellers; stainless steel coupling; Silicon bronze motor bracket & external check, valve, non corrosive screen and cable guard, Available in 50 or 60 Hz., All K Series pumps have 1" discharge in external check valve, OUTPUT IN GALLONS PER HOUR - 1/2, 3/4, 1 HP;, Depth, 25, 50, 75, 100, 125, 150, 175, 200, 225, 250, 275, 300, 325, 350, 375, 400, 425, Discharge Pressure 0 P.S.I., 1/2 HP, 995, 950, 865, 790, 720, 635, 540, 445, 325, 160, 3/4 HP, 1005, 960, 900, 850, 800, 760, 700, 635, 560, 490, 410, 325, 205, 1 HP, 1020, 975, 940, 895, 860, 820, 775, 725, 680, 640, 590, 535, 475, 420, 325, 240, 120, Discharge Pressure 30 P.S.I., 1/2 HP, 815, 730, 670, 550, 470, 360, 3/4 HP, 875, 815, 755, 705, 660, 590, 505, 420, 360, 240, 1 HP, 910, 865, 820, 780, 745, 695, 650, 600, 555, 480, 420, 335, 275, Discharge Pressure 50 P.S.I., 1/2 HP, 670, 585, 480, 360, 240, 3/4 HP, 770, 720, 660, 585, 515, 445, 360, 250, 120, 1 HP, 835, 790, 745, 695, 660, 610, 550, 490, 430, 365, 275, 170 MCDONALD, A.Y.
15-VAN.jpg 3 to 4 feet Variable Arc Spray Nozzles
Locke Part #: S0453 MFG Part #: P10004
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: ARC NOZZLE, Radius: 3 to 4 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters. RAIN BIRD CORP
Product Image Not Available 3 Wire with Ground
Locke Part #: S0168 MFG Part #: 6617-135
MCDONALD, A.Y.
Pricing Category: SR08, Stock or OAN: s Easily expand the Rain Bird ESP-Modular, ESP-Me, ESP-SMT or ESP-SMTe Series Controller with this 3 station hot-swappable module, which can be added without powering down the controller. Modules can be installed in any available slot. RAIN BIRD CORP
pumps-2.jpg 30" Sprinkler Control Valve Key
Locke Part #: T0223 MFG Part #: 30-30
Arrowhead Brass
S0192.jpg 300# Pressure Gauge
Locke Part #: S0192 MFG Part #: 1428
Regular pressure hand (shown at zero pushes LAZY hand (shown at 240 mIbs.) to peak operating or surge pressure point PASCO SPECIALTY & MFG INC
S0051.jpg 360K Pump
Locke Part #: S0051 MFG Part #: 555111
LITTLE GIANT
S25.jpg 3HP Pedestal Pump
Locke Part #: S0025 MFG Part #: 547151
Has automatic overload protector with automatic reset. 1-1/4" Discharge pipe. Float activated switch. 2,820 GPH with 5' lift pipe. 115V, 60 Hz, 5.8 amps. Polypropylene base & strainer. LITTLE GIANT
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Center Strip, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed center strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: End Strip, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed end strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Full Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed full-circle pattern (360 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Half Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed half-circle pattern (180 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Quarter Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in pop-up sprinkler head helps to clear obstacles for watering, Pre-installed quarter-circle pattern (90 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Side Strip, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed side strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Square, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed square pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage RAIN BIRD CORP
1804-PRS.jpg 4 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0451 MFG Part #: A44120
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 6", Description2: ONLY 4" POP-UP HEIGHT, Spacing: 3 to 24 feet, Exposed Surface Diameter: 2-1/4" Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets RAIN BIRD CORP
1804-PRS.jpg 4 inch Pop-Up Spray Head with PRS
Locke Part #: S0412 MFG Part #: A50205
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 6", Description2: ONLY W/PRS 4" POP-UP, Spacing: 2.5 to 24 feet, Exposed Surface Diameter: 2-1/4", Optional Feature: 30psi in-stem pressure regulation PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets. RAIN BIRD CORP
Pricing Category: SR04, Stock or OAN: s, Pressure: 25 to 70 psi, Body: 6", Description2: ONLY W/SAM/PRS 4" POPUP, Spacing: 3 to 20 feet, Exposed Surface Diameter: 2-1/4" PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money. Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.50 gpm (0.11 m3/h; 1.80 l/m) otherwise, Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Built-in Seal-A-Matic (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site., Even stronger retract spring to accommodate elevation changes up to 14 feet (4,2 m). One of the strongest springs in the industry., Co-molded, pressure-activated, multi-functional wiper seal assures positive seal without excess flow-by which enables more heads to be installed on the same valve., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life. Designed for use with all Rain Bird spray head nozzles., Designed for use with all Rain Bird plastic spray head nozzles., 1/2 (15/21) female threaded inlet RAIN BIRD CORP
15-VAN.jpg 4 to 6 feet Variable Arc Spray Nozzles
Locke Part #: S0459 MFG Part #: P10006
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: ARC NOZZLE, Radius: 4 to 6 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters. RAIN BIRD CORP
501S.jpg 5" x 1" Extra Sanitary Well Seal
Locke Part #: S0076 MFG Part #: WS500100
Weight (Lbs): 2, Carton Quantity: 10, MFG#: 501S, Size (in): 5, Fits Casing ID: 4-7/8 - 5-1/4", Drop Pipe IPS: 1", Vent Tap IPS: 1/2", Conduit Tap IPS: 3/4" Molded from HI IMPACT ABS for "EXTRA" strength and endurance., The packer is "Extra" thick and its exclusive design enables the sanitary sealing of an extra wide range of casing sizes., These sanitary well seals have a proven track record of over 2 decades in both warm and cold climates. MERRILL MFG
S0081.jpg 5" x 1" Well Seal
Locke Part #: S0081 MFG Part #: WS500100
For shallow-well application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG
S83.jpg 5" x 1-1/4" x 1" Well Seal
Locke Part #: S0083 MFG Part #: WS522510
For Deep-Well Application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG
Color: Red, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Red, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “FC” for 360 degree only, Description2: ROTOR POP-UP SPRINKLER, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360 RAIN BIRD CORP
Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “PC” for 40-360 degrees, Description2: FULL CIRCLE ROTOR POPUP, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360 RAIN BIRD CORP
Model: Plus, Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “PC” for 40-360 degrees, Description2: FULL CIRCLE ROTOR POPUP, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360 RAIN BIRD CORP
Model: Plus, Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “PC” for 40-360 degrees, Description2: ROTOR, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360 RAIN BIRD CORP
S61.jpg 5025PVSP 1/4 HP SUMP PUMP
Locke Part #: S0060 MFG Part #: 5025PVSP
Voltage: 115, Weight: 7.0, Amps: 4.4, HP: 1/2, Phase: 1, vendor2: 102511SP, (RPM): 3450, Discharge: 1-1/2, Cable Length: 10 ft. Rustproof construction, Clog proof vortex impeller, Includes check valve and hose adapter, High torque capacitor-start motors, Easy to install. Easy to service., Available in 1/4, 1/3 and 1/2 HP models., Multipurpose replaceable piggyback float saves installation time, Automatic or manual operation, Float can be used attached to the pump, the discharge pipe or to the basin wall, Float chamber easily opened for cleaning, Adjustable pump down range, UL Listed, CSA approved, Max. Fluid Temperature:, 125 F (50 C) Continuous, MATERIALS OF CONSTRUCTION:, Lower motor casing ........Aluminum, Upper motor casing, & pump jacket .................Reinforced, ........................................ Polypropylene, Shaft ...............................Stainless Steel, Shaft Seal...................... Lip seal, Buna N, Bearings .........................Heavy Duty Ball, Lower motor casing ........Polypropylene, O-Rings.......................... Buna N, Handle & Strainer ...........Polypropylene, Float (1-1/2 HP) ..............Polypropylene, Cable ..............................Neoprene MCDONALD, A.Y.
pumps-2.jpg 54"n Sprinkler Control Valve Key
Locke Part #: T0224 MFG Part #: 30-54
Arrowhead Brass
S0068.jpg 6" Cast Aluminum Cap
Locke Part #: S0068 MFG Part #: VC600
MERRILL MFG
501S.jpg 6" x 1" Extra Sanitary Well Seal
Locke Part #: S0077 MFG Part #: WS600100
Weight (Lbs): 3, Carton Quantity: 10, MFG#: 601S, Size (in): 6, Fits Casing ID: 5-7/8 - 6-1/4", Drop Pipe IPS: 1", Vent Tap IPS: 1/2", Conduit Tap IPS: 3/4" Molded from HI IMPACT ABS for "EXTRA" strength and endurance., The packer is "Extra" thick and its exclusive design enables the sanitary sealing of an extra wide range of casing sizes., These sanitary well seals have a proven track record of over 2 decades in both warm and cold climates. MERRILL MFG
S0081.jpg 6" x 1" Well Seal
Locke Part #: S0082 MFG Part #: WS600100
For shallow-well application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG
For Deep-Well Application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG 642367029531
1804-PRS.jpg 6 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0405 MFG Part #: A44205
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 9-3/8", Description2: ONLY 6" POP-UP HEIGHT, Spacing: 3 to 24 feet, Exposed Surface Diameter: 2-1/4" Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets RAIN BIRD CORP
1804-PRS.jpg 6 inch Pop-Up Spray Head with PRS
Locke Part #: S0415 MFG Part #: A50305
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 9-3/8", Description2: ONLY W/PRS 6" POP-UP, Spacing: 2.5 to 24 feet, Exposed Surface Diameter: 2-1/4", Optional Feature: 30psi in-stem pressure regulation PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets. RAIN BIRD CORP
15-VAN.jpg 6 to 8 feet Variable Arc Spray Nozzles
Locke Part #: S0463 MFG Part #: P10008
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: ARC NOZZLE, Radius: 6 to 8 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters. RAIN BIRD CORP
Size: 6-1/2", Pricing Category: SR07, Stock or OAN: s, Description2: EXTENSION UV-resistant thermoplastic construction for long life., Fits all Rain Bird spray heads and nozzles. Exception: Cannot be used with bubblers., Easily installed without any tools., Can be reinstalled without damaging the threads if accidentally knocked off the riser or spray head., Maximum recommended number: two extensions per sprinkler. RAIN BIRD CORP
Pricing Category: SR08, Stock or OAN: s, Description2: F/ESP4ME CONTROLLER ONLY RAIN BIRD CORP
S0068.jpg 8" Cast Aluminum Cap
Locke Part #: S0069 MFG Part #: VC800
MERRILL MFG
Color: Green, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Green, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Green, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
15-VAN.jpg 8 to 10 feet Variable Arc Spray Nozzles
Locke Part #: S0440 MFG Part #: P1001001
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Radius: 8 to 10 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters. RAIN BIRD CORP
This device provides instant hot water with a touch of a button., Push button operation overrides the timer operation and continues until the desired temperature is met at the valve.Acting in its secondary function, the signal repeater extends the range of data transmission between the pump and valve., Can be plugged into any standard electrical outlet in the house, Wireless push button start, For use with Laing ACT-4 recirculators LAING
Pricing Category: SR08, Stock or OAN: s, Description2: OUTPUT MODULE Expand the ESP-LXM to eight stations by using SM8 station modules., This easy-to-install module snaps into one of four bays on the controller chassis., Dynamic Station Numbering eliminates numbering gaps between stations for easy, confusion-free programming. RAIN BIRD CORP
S48.jpg Auto Switch for S0049
Locke Part #: S0048 MFG Part #: 599008
Converts any manual pump up through 1/2 HP, to automatic operation. Attaches easily to the back of the Little Giant Water Wizard. 115V, 10 amp switch has 10' power cord with 3-prong molded plug. "On" level:, 7-3/8" (+/-3/8"), "Off: level: 3/4", (+/-3/8")., UL Listed. LITTLE GIANT
Model: ACT E10, Weight: 6.50 lb, Power Consumption: 60 W, Control Mode: Temperature and Timer Industry s first RETROFIT hot water recirculation pump, Designed specifically for tankless water heater applications,, Controlled by a timer and thermostat., No return line required, Compact spherical motor design, Energy efficient ECM motor, Silent operation, Built-in temperature control, Built-in 24 hour timer with multiple on/off settings, Suitable for tankless water heater, 6 foot power cord LAING
61235 Dryconn Black Gray.jpg Black/Gray- Outdoor/Irrigation
Locke Part #: S0305 MFG Part #: 61241
Outdoor Unit KING INNOVATION 719362612416
61135 Dryconn black white.jpg Black/White- Outdoor/Irrigation
Locke Part #: S0304 MFG Part #: 61135
KING INNOVATION 719362611358
S0217.jpg Brass Impact Sprinkler, 1/2" Male Inlet
Locke Part #: S0217 MFG Part #: 25PJDA-C
Material: Brass, Inlet: 1/2" Male, Specifications: Spacing up to 50 feet Apart--High Gallonage Output, Coverage Arc: Full/Part Circle, Coverage Radius: 20-41 ft, Features: ADJ Distance Control Diffuser Pin, PJ Precision Jet Tube Traditional favorite with classic impact sound, Straight through water flow design for superior dirty water performance, Easy to install and adjust, Brass, bronze, and stainless steel construction lasts longer than competitors' zinc sprinklers, Adjustable deflector flap adjusts stream length from 20-foot (6 m) to 41-foot (12.5 m) radius, Diffuser screw breaks water into smaller water droplets for uniform watering, Die-cast, white bronze PJ spray arm controls stream, prevents side splash onto buildings and walkways RAIN BIRD CORP
S165.jpg Chrome Relay
Locke Part #: S0165 MFG Part #: 6617-269
MCDONALD, A.Y.
The Flat Concealed Sprinkler threads, onto Uponor s Fire Sprinkler Adapter, Fitting. All sprinklers come complete, with a plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems. Sprinklers, designated LF are also NSF Annex G, compliant. Uponor
This specially designed Concealed, Sprinkler Wrench quickly and easily, allows access to service Flat Plate, (RFC) Concealed Sprinklers Uponor
RPKDIAPHRE.jpg Diaphragm Repair Kit for DV and DVF Valves
Locke Part #: S0281 MFG Part #: DRKCP/CPF
Pricing Category: SR01, Stock or OAN: s, Description2: 1" DV DIAPH REPAIR KIT Diaphragm Repair Kit includes a new black rubber diaphragm assembly with preinstalled diaphragm filter, 1 new solenoid filter, 6 screws, and a spare diaphragm spring., Primary Application: Residential Installation RAIN BIRD CORP
Material: Lead-Free Brass, Product Series: E3-BCTVNN1W-11, Size‎: 1/2", Connection Sizes: Thread, Power Supply: 10 watts Saves 68% electricity compared to a standard circulating pump, Highly efficient ECM Technology, Long lasting, silent operation, Resistant to scale build up, Maintenance free without blockage, extended service life, Single bearing design, Shaftless and sealless. LAING
S0148.jpg Ejector Package
Locke Part #: S0155 MFG Part #: 7509JP
Ejector package includes: Ejector, Nozzle, Venturi, Gasket, Bolts, Washers, Foot Valve & Cast Iron Casting. MCDONALD, A.Y.
Pricing Category: SR08, Stock or OAN: s, Width: 14.32", Depth: 5.50", Height: 12.69", Output: 26.5 VAC 1.9A, Description2: OUTDOOR 120V, Input Required: 120 VAC ± 10%, 60Hz Controller Features:, Large LCD display with easy to navigate softkey user interface, Hot-swappable modules, no need to power down the controller to add/remove modules, Dynamic station numbering eliminates station numbering gaps, Weather Sensor input with override switch, Master valve/pump start circuit, 6 user-selectable languages, Non-Volatile (100- year) program memory, Standard 10kV surge protection, Front panel is removable and programmable under battery power, Compatible with Rain Bird Landscape Irrigation and Maintenance Remote, Water Management Features:, Optional Flow Smart Module with Learn Flow utility and flow usage totalizer, FloWatch protection for high and low flow conditions with user defined reactions, FloManager manages hydraulic demand, making full use of available water to shorten total watering time, SimulStations are programmable to allow up to 5 stations to operate at the same time, Water Windows by program plus Manual MV Water Window, Cycle+Soak by station, Rain Delay, 365-Day Calendar Day Off, Programmable Station Delay by program, Normally Open or Closed Master Valve programmable by station, Weather Sensor programmable by station to prevent or pause watering, Program Seasonal Adjust, Global Monthly Seasonal Adjust, Diagnostic Features:, Alarm light with external case lens, Electronic diagnostic circuit breaker, Variable test program, RASTER station wiring test, Controller Hardware:, Plastic, locking, UV resistant, wall-mount case, Optional Metal Case & Pedestal, Flow Smart Module factory installed or field upgradable, Operating Specifications:, Seasonal Adjust; 0% to 300% (16 hrs maximum station run time), 4 independent programs (ABCD), ABCD programs can overlap, 8 start times per program, Program Day Cycles include Custom days of the week, Odd, Odd31, Even, & Cyclical dates, Manual station, program, test program, Power back-up: Lithium coin-cell battery maintains time and date while nonvolatile memory maintains the programming, Multi-valve capacity: Maximum five 24 VAC, 7VA solenoid valves simultaneous operation including the master valve, maximum two solenoid valves per station, Certifications:, UL, CUL, CE, CSA, C-Tick, FCC Part 15 RAIN BIRD CORP
K-Factor: 4.9 The Recessed Pendent Sprinkler, threads onto Uponor s Fire Sprinkler, Adapter Fitting. Sprinklers are NSFand, UL-approved for combined, plumbing and fire sprinkler systems., Sprinklers designated LF are also NSF, Annex G compliant. Uponor
K-Factor: 4.3 The Concealed Sprinkler Assembly, comes with the sprinkler threaded onto, Uponor s stainless-steel multi-port, fitting with ProPEX outlets. All, assemblies come complete with a, plastic protective cap and cup., Sprinkler assemblies are NSF- and, UL-approved for combined plumbing, and fire sprinkler systems. Uponor
S56.jpg Float Switch with 10’ Cord for S55
Locke Part #: S0056 MFG Part #: 599118
LITTLE GIANT
Inlet: 3/4", Coverage Arc: 40° - 360° Reversing Full and Part-Circle, Coverage Radius: 26-38 ft, Pop-Up Height: 4", Rotor Series: 42SA, Features: Gear Drive, Rain Curtain Nozzles Easy arc adjustment from the top requiring only a flat- bladed screwdriver, Pre-installed 3.0 Rain Curtain nozzle, Professional gear-drive, water-lubricated design for durable and reliable operation, Reversing full and part circle rotation from 40 to 360 arc adjustment, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, Thick rubber cover that resists debris and offers the ultimate in safety, Quick check Arc/Fast Forward allows wet or dry arc adjustment, Pressure-activated multifunction wiper seal protects internals from debris and assures positive pop-up retraction, Reinforced flow path for additional side load strength, Additional o-rings and seals for extra protection in "gritty" water, Heavy-duty stainless steel retract spring assures positive pop-down, Self-adjusting stator does not require replacement when changing nozzles RAIN BIRD CORP
Model: E1-BCSVNN1W-06, Material: Lead-Free Brass, Connection Size: 1/2”, Connection Type: Sweat, Bronze Housing: Standard Easy installation, Single bearing design, Programmable timer and built-in thermostat available to further reduce energy consumption., Adjustable Set Point range from 68 F to 158 F (20 C to 70 C), No shaft, no seal, No shaft, no seal, Saves 68% electricity compared to a standard circulating pump, Long lasting, silent operation, Resistant to scale build up, Maintenance free without blockage LAING
Model: E1-BCTVNN1W-06, Material: Lead-Free Brass, Connection Size: 1/2”, Connection Type: Thread, Bronze Housing: Standard Easy installation, Single bearing design, Programmable timer and built-in thermostat available to further reduce energy consumption., Adjustable Set Point range from 68 F to 158 F (20 C to 70 C), No shaft, no seal, No shaft, no seal, Saves 68% electricity compared to a standard circulating pump, Long lasting, silent operation, Resistant to scale build up, Maintenance free without blockage LAING
Model: E1-BCUVNN1W-06, Material: Lead-Free Brass, Connection Size: 1/2”, Connection Type: Union, Bronze Housing: UltraCirc Easy installation, Programmable timer and built-in thermostat available to further reduce energy consumption., Available with integrated check and ball valves for quick isolation during service., Saves 68% electricity compared to a standard circulating pump, Highly efficient ECM technology, Long lasting, silent operation, Resistant to scale build up, No shaft, no seal, Maintenance free without blockage, Single bearing design LAING
S0051.jpg HRK-360S Repair Kit for S0051 Pump
Locke Part #: S0063 MFG Part #: 555702
LITTLE GIANT
Float switch with 15' cable. Alarm has red LED light, horn with silence switch & test button. 115V plug. LITTLE GIANT
S54.jpg Indoor Hi-Water Alarm With 6’Cord
Locke Part #: S0054 MFG Part #: 513288
Float switch with 15' cable. Alarm has red LED light, horn with silence switch & test button. 115V plug. LITTLE GIANT
10600 King 6 blue.jpg King 6 Blue Direct Bury
Locke Part #: S0303 MFG Part #: 10666
KING INNOVATION 719362106663
A. Self-cleaning Dirt Arrestor Screen, The raised screen prevents clogging ofdrain due to sediment and/or contaminants., B. Patented Pressure Sensitive Valve, Releases water slowly at root level., C. Patented Backflow Check, Eliminates potential freeze damage andbackflow contamination by preventing waterfrom re-entering system., D. Ergonomic, Non-Corrosive Housing, Injection molded with high impact polymerto ensure lifetime protection., E. Broad Dispersing Pad, Keeps roots and soil from penetrating,minimizing the need for sumps. KING INNOVATION 719362221632
Model: E1-BCANRT1W-06, Weight: 4 lbs., Motor Design: Shaft-less spherical motor, Input: 14 Watts, Maximum Fluid Temperature: 203°F / 95°C, Maximum Line Pressure: 145 PSI, Compatible Fluids: Potable water Silent during operation, Requires only one pump and one installation for all fixtures on the hot water plumbing line, Does not require a return line, Saves the average family of four thousands of gallons of water annually, Saves money and pays for itself in a short period of time, Built-in 24-hour timer which allows the selection of system operating periods to suit family usage, Built-in fixed thermostat or an optional, adjustable ON thermostat, Comes complete with a 6 ft. long power cord LAING
Model: E1-BCANCT1W-06, Weight: 4 lbs., Motor Design: Shaft-less spherical motor, Input: 14 Watts, Maximum Fluid Temperature: 203°F / 95°C, Maximum Line Pressure: 145 PSI, Compatible Fluids: Potable water Silent during operation, Requires only one pump and one installation for all fixtures on the hot water plumbing line, Does not require a return line, Saves the average family of four thousands of gallons of water annually, Saves money and pays for itself in a short period of time, Built-in 24-hour timer which allows the selection of system operating periods to suit family usage, Built-in fixed thermostat or an optional, adjustable ON thermostat, Comes complete with a 6 ft. long power cord LAING
The Flat Concealed Sprinkler threads, onto Uponor s Fire Sprinkler Adapter, Fitting. All sprinklers come complete, with a plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems. Sprinklers, designated LF are also NSF Annex G, compliant. Uponor
Inlet: 1/2", Coverage Arc: 360° Full Circle or 20° - 340° Part Circle, Coverage Radius: 20-41 ft, Dimensions HxWxD: 6" x 4" x 4", Pop-Up Height: 3", Rotor Series: Maxi-Paw / Mini-Paw Low & meduim gallonage pop-up impact rotor sprinklers, Rain Bird's #1 selling pop-up impact sprinkler, Water Saver brass weighted PJ spray guide arm controls stream, prevents side splash onto buildings and walkways, Patented, pressure-activated wiper seal assures reliable pop-up and retraction, Diffuser screw breaks water into smaller droplets for uniform watering, Rugged, high-impact case dimensions: 4 1/8" diameter, 8 5/8" high, Spacing from 26 to 41 feet apart (7,9 to 12,5 m) RAIN BIRD CORP
Controls two pumps running one or the other to prevent overheating. Visual and audible alarm. LITTLE GIANT
102.jpg Non-Insulated Class III Backflow Rock Enclosure
Locke Part #: M1288 MFG Part #: 6 56803 01021 2
Color: Fieldstone Grey, Weight: 8 lbs, Dimensions: 27"L × 21"W × 25"H, Item: M1288, Backflow Pipe Size: 3/4"– 1/2", Possible RP Dimensions: 19"L × 23"H, Possible PVB Dimensions: 14"L × 24"H Commercial-grade construction stands up to the elements, Durable polyethylene construction., Color and texture is part of the material, not painted on., They won t fade in sun or crack in cold weather., Anyone can easily install them, Small Pump Systems., Taller profile for vertical applications., Realistic and natural rock appearance., Lightweight, single piece liftoff design., Well/Septic up to 24 Tall., Backflow Assemblies, Reduced Pressure Assemblies, Pressure Vacuum Breaker Assemblies., Reduced Pressure Assemblies, Pressure Vacuum Breaker Assemblies., Soft grey with a rich combination of natural tones and multicolor highlights, , Utility Pedestals up to 24 Tall., New RealRock material provides the most realistic rock enclosure available anywhere., Class III Non-freeze protection. Dekorra Rock Enclosures Class III and III-V are designed and constructed to provide system security for components when freezing temperatures are not a consideration. DEKORRA PRODUCTS
S0179.jpg On 20, Off 40
Locke Part #: S0194 MFG Part #: MPS2040
Captive nut on cover. Pressure switch pipe connection 1/4" NPT. Adjustment instructions are inside top cover. Contact points open on cut-out pressure. Points close on cut-in or pressure drop. MERRILL MFG
S0179.jpg On 30, Off 50
Locke Part #: S0179 MFG Part #: MPS3050
Captive nut on cover. Pressure switch pipe connection 1/4" NPT. Adjustment instructions are inside top cover. Contact points open on cut-out pressure. Points close on cut-in or pressure drop. MERRILL MFG
S0195.jpg On 30, Off 50
Locke Part #: S0195 MFG Part #: MPSM43050
Shuts off at approximately 10 psi below cut-in pressure Auto start manual start or off lever MERRILL MFG
S0179.jpg On 40, Off 60
Locke Part #: S0196 MFG Part #: MPS4060
Captive nut on cover. Pressure switch pipe connection 1/4" NPT. Adjustment instructions are inside top cover. Contact points open on cut-out pressure. Points close on cut-in or pressure drop. MERRILL MFG
Pricing Category: SR03, Stock or OAN: s, Description2: ADAPTER Plastic model which attaches nozzle to riser to irrigate ground cover and shrub areas., Adapts Rain Bird nozzles for use with 1/2" (15/21) MPT threaded risers, 1/2" (15/21) female inlet threads, Accepts protective, non-clogging 1800 Series filter screen (shipped with nozzle) and PCS Series screens., Durable, non-corrosive plastic construction., Fine top threads accept all Rain Bird nozzles RAIN BIRD CORP
Power Supply: Internally powered by the E Series circulating pump, Minimum Switch Interval: 30 minutes Can be installed on all E1/E3 Series pumps., The timer is easily installed by removing the motor end cap, plugging in the timer and setting the timer schedule without any wiring, The timer can be used in 3-different selections: ON, OFF and TIMER., The ON selection operates the pump continuously, the OFF selection turns the pump OFF and the TIMER selection (depicted by a clock on the timer) turns the pump on when programmed. LAING
Tank volume ( Gallons): 119, Height (In): 62, Diameter (In): 26, System Connection(NPTF) in: 1-1/4, Maximum Operating Temperature: 200°F, Maximum Working Pressure: 100 Psig, Factory Pre-Charge: 38 Psig, Max Accept Volume (Gallons): 46.4, Shipping Weight (lbs): 166 Features, :, Multi-Dome Construction, Heavy-Duty Butyl/EPDM Diaphragm, 100% Polypropylene Liner, Hoop Ring & Groove Design, Welded Air Stem Amtrol Inc
Tank volume ( Gallons): 20, Height (In): 32, Diameter (In): 15, System Connection(NPTF) in: 1, Maximum Operating Temperature: 200°F, Maximum Working Pressure: 100 Psig, Factory Pre-Charge: 38 Psig, Max Accept Volume (Gallons): 11.4, Shipping Weight (lbs): 33 Features, :, Multi-Dome Construction, Heavy-Duty Butyl/EPDM Diaphragm, 100% Polypropylene Liner, Hoop Ring & Groove Design, Welded Air Stem Amtrol Inc
Tank volume ( Gallons): 32, Height (In): 47, Diameter (In): 15, System Connection(NPTF) in: 1, Maximum Operating Temperature: 200°F, Maximum Working Pressure: 100 Psig, Factory Pre-Charge: 38 Psig, Max Accept Volume (Gallons): 11.2, Shipping Weight (lbs): 43 Features, :, Multi-Dome Construction, Heavy-Duty Butyl/EPDM Diaphragm, 100% Polypropylene Liner, Hoop Ring & Groove Design, Welded Air Stem Amtrol Inc
Tank volume ( Gallons): 44, Height (In): 36, Diameter (In): 22, System Connection(NPTF) in: 1-1/4, Maximum Operating Temperature: 200°F, Maximum Working Pressure: 100 Psig, Factory Pre-Charge: 38 Psig, Max Accept Volume (Gallons): 33.9, Shipping Weight (lbs): 69 Features, :, Multi-Dome Construction, Heavy-Duty Butyl/EPDM Diaphragm, 100% Polypropylene Liner, Hoop Ring & Groove Design, Welded Air Stem Amtrol Inc
Tank volume ( Gallons): 62, Height (In): 47, Diameter (In): 22, System Connection(NPTF) in: 1-1/4, Maximum Operating Temperature: 200°F, Maximum Working Pressure: 100 Psig, Factory Pre-Charge: 38 Psig, Max Accept Volume (Gallons): 34.1, Shipping Weight (lbs): 92 Features, :, Multi-Dome Construction, Heavy-Duty Butyl/EPDM Diaphragm, 100% Polypropylene Liner, Hoop Ring & Groove Design, Welded Air Stem Amtrol Inc
Tank volume ( Gallons): 86, Height (In): 47, Diameter (In): 26, System Connection(NPTF) in: 1-1/4, Maximum Operating Temperature: 200°F, Maximum Working Pressure: 100 Psig, Factory Pre-Charge: 38 Psig, Max Accept Volume (Gallons): 46.4, Shipping Weight (lbs): 123 Features, :, Multi-Dome Construction, Heavy-Duty Butyl/EPDM Diaphragm, 100% Polypropylene Liner, Hoop Ring & Groove Design, Welded Air Stem Amtrol Inc
Pricing Category: SR03, Stock or OAN: s, Height: 1", Pressure: 20 to 90 psi, Description2: COMPENSATING BUBBLER, Flow: 0.50 gpm, Spacing: 1 to 3 feet, Top Diameter: 1" Low flow rates allow water to be absorbed as needed., Reduces runoff., Flow will not fluctuate at pressures between 20 and 90 psi., Maintains even flow., Flow is not adjustable for increased vandal resistance., No adjustment required., Corrosion-proof plastic and rubber construction for long life., Shipped with special SR-050 1/2" (15/21) bubbler filter screen for easy installation and resistance to debris., 1/2" (15/21) female threaded inlet RAIN BIRD CORP
Pricing Category: SR03, Stock or OAN: s, Height: 1", Pressure: 20 to 90 psi, Description2: COMPENSATING BUBBLER, Flow: 1.00 gpm, Spacing: 1 to 3 feet, Top Diameter: 1" Low flow rates allow water to be absorbed as needed., Reduces runoff., Flow will not fluctuate at pressures between 20 and 90 psi., Maintains even flow., Flow is not adjustable for increased vandal resistance., No adjustment required., Corrosion-proof plastic and rubber construction for long life., Shipped with special SR-050 1/2" (15/21) bubbler filter screen for easy installation and resistance to debris., 1/2" (15/21) female threaded inlet RAIN BIRD CORP
Inlet: 1-1⁄4" NPTF, Tank volume ( Gallons): 14, Height (In): 30, Diameter (In): 17, Maximum Working Pressure: 40 PSI, Factory Pre-Charge: 38 psi, Shipping Weight (lbs): 50, Motor HP: 1/2, Minimum Inlet Flow (GPM): 10, outlet: 1" NPTF, Minimum Inlet Pressure: 10 psi, Minimum Cut out Pressure: 80 psi, Minimum Water Main Meter Size (In): 3/4 Features, :, Powerful 1/2 hp motor designed for quiet, efficient operation. Tank is NSF International Standard 61 listed, Stainless steel pump housing and connections for corrosion resistance and extra long life., Specially trimmed impeller to maximize performance., Pre-wired to 115 VAC. Can be rewired to 230 VAC, Guardian CP Digital Control Allows accurate pressure settings up to 80 psi., Digital Control Maintains 10 psi differential for steady, consistent pressure. Digital Control Protects the pump with built-in diagnostics., Heavy-duty diaphragm style storage tank, Specifically designed for city water boosting applications, Polypropylene liner provides 100% corrosion resistant, non-metallic water reservoir. Amtrol Inc
Inlet: 1-1⁄4" NPTF, Tank volume ( Gallons): 20, Height (In): 38, Diameter (In): 17, Maximum Working Pressure: 45 PSI, Factory Pre-Charge: 38 psi, Shipping Weight (lbs): 55, Motor HP: 1/2, Minimum Inlet Flow (GPM): 11, outlet: 1" NPTF, Minimum Inlet Pressure: 10 psi, Minimum Cut out Pressure: 80 psi, Minimum Water Main Meter Size (In): 1 Features, :, Powerful 1/2 hp motor designed for quiet, efficient operation. Tank is NSF International Standard 61 listed, Stainless steel pump housing and connections for corrosion resistance and extra long life., Specially trimmed impeller to maximize performance., Pre-wired to 115 VAC. Can be rewired to 230 VAC, Guardian CP Digital Control Allows accurate pressure settings up to 80 psi., Digital Control Maintains 10 psi differential for steady, consistent pressure. Digital Control Protects the pump with built-in diagnostics., Heavy-duty diaphragm style storage tank, Specifically designed for city water boosting applications, Polypropylene liner provides 100% corrosion resistant, non-metallic water reservoir. Amtrol Inc
Inlet: 1-1⁄4" NPTF, Tank volume ( Gallons): 34, Height (In): 39, Diameter (In): 23, Maximum Working Pressure: 50 PSI, Factory Pre-Charge: 38 psi, Shipping Weight (lbs): 90, Motor HP: 1/2, Minimum Inlet Flow (GPM): 12, outlet: 1" NPTF, Minimum Inlet Pressure: 10 psi, Minimum Cut out Pressure: 80 psi, Minimum Water Main Meter Size (In): 1-1/4 Features, :, Powerful 1/2 hp motor designed for quiet, efficient operation. Tank is NSF International Standard 61 listed, Stainless steel pump housing and connections for corrosion resistance and extra long life., Specially trimmed impeller to maximize performance., Pre-wired to 115 VAC. Can be rewired to 230 VAC, Guardian CP Digital Control Allows accurate pressure settings up to 80 psi., Digital Control Maintains 10 psi differential for steady, consistent pressure. Digital Control Protects the pump with built-in diagnostics., Heavy-duty diaphragm style storage tank, Specifically designed for city water boosting applications, Polypropylene liner provides 100% corrosion resistant, non-metallic water reservoir. Amtrol Inc
Material: Plastic, Inlet: 1/2" Male, Coverage Arc: Full/Part Circle, Features: PJ Precision Jet Tube Durable high-impact polymer and stainless steel construction, Full circle (360 degree) or part circle (20 to 340 degree) coverage, with infinite pattern adjustment, Water-Saving PJ spray-guiding arm controls water stream and prevents side splash onto buildings and walkways, Weighted arm for slower rotation and better watering coverage, Straight through flow for superior performance in dirty water conditions, Spacing from 24 to 45 feet, Removable bayonet nozzle for easy cleaning RAIN BIRD CORP
E1174.jpg Pump
Locke Part #: E1174 MFG Part #: 59896879
Stainless flange with terminal box., Flow Range: 0 to 21 GPM, Watts: 5-45W, Amps: 0.65A, Head Range: 0 to 19 Feet, Motor: 115V, Min. Fluid Temperature: 36 F, Max. Fluid Temperature: 230 F, Max. Working Pressure: 150 PSI GRUNDFOS PUMPS CORP
Q7500200.jpg Recessed Sprinkler Wrench
Locke Part #: R1991 MFG Part #: Q7500200
These specially designed Recessed, Sprinkler Wrenches quickly and easily, allow access to service Recessed, Pendent and LF Horizontal Sidewall, Sprinklers. Uponor
S57.jpg Replacement Cover only for S0030 Topp Only
Locke Part #: S0027 MFG Part #: C18TSF-0155P
Sump Pump Check Valve (1-1/4 x 1-1/2) Pipe Hose Connection, Sewage Pump Check Valve (2 x 2) Pipe Hose Connection, Sewage Pump Basin (18 x 30) With (2 x 2) Split Cover TOPP INDUSTRIES, INC
Pricing Category: SR09, Stock or OAN: s, Height: 4", Inlet: 1⁄2" female-threaded, Flow: 0.50 to 4.00 gpm; 30 to 240 gph, Inlet Pressure: 15 to 70 psi Provides convenient 30 psi (2.1 bar) pressure regulation at the riser for any 1/2" FPT emission device or compression adapter., Can be installed above or below grade., Can be used with Xeri-Bird 8 Multi-Outlet Emission Device. RAIN BIRD CORP
lf74300br.jpg RFC43 (165°F) Flat Concealed Sprinkler
Locke Part #: R1984 MFG Part #: Q74300BR
K-Factor: 4.3 The Concealed Sprinkler threads onto, Uponor s Fire Sprinkler Adapter Fitting., All sprinklers come complete with a, plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems. Uponor
lf74300br.jpg RFC49 (165°F) Flat Concealed Sprinkler
Locke Part #: R1985 MFG Part #: Q74900FC
K-Factor: 4.9 The Concealed Sprinkler threads onto, Uponor s Fire Sprinkler Adapter Fitting., All sprinklers come complete with a, plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems. Uponor
F0049.jpg SDR35 or Schedule 40 Gasket Kit (2 Each)
Locke Part #: F0049 MFG Part #: 61765 GASKET KIT
NORWESCO INC
S56.jpg Sewage Pump only, 1/2 HP 2" Discharge
Locke Part #: S0055 MFG Part #: 511323
LITTLE GIANT
Inlet: 1/2", Coverage Arc: 40° - 360° Reversing Full and Part-Circle, Coverage Radius: 19 - 32 ft., Pop-Up Height: 4", Rotor Series: 32SA, Features: Gear Drive, Rain Curtain Nozzles Top-adjust arc adjustment requiring only a flat-bladed screwdriver, This rotor comes with a pre-installed 3.0 Rain Curtain nozzle, Rain Curtain, Nozzle removal feature and easily removable filter screen makes maintenance very simple, Water-lubricated gear-driven design for durable, reliable operation, 40 - 360 Part-circle arc rotation and reversing full-circle rotation in one, Radius adjustment screw allows up to 35% radius reduction without changing nozzles, True 4" (10,2cm) pop-up (measured from center of nozzle), Quick Check Arc/Fast Forward, Dual action, positive stop wiper seal protects internals from debris and assures positive pop-up and retraction, Self-adjusting stator does not require replacement when changing nozzles, Easily removable filter screen, Nozzle removal feature, Arc setting factory preset at 180 for installation convenience RAIN BIRD CORP
115 Volt, Sewage ejector pump 15' cord, 80 GPM @5'., 18" x 30" polyethylene basin with structural foam 1-piece cover., Handles liquids & solid waste materials., Cover can be used as: 2" vent/ 3" discharge, 3" vent/ 2" discharge, or 2" vent/ 2" discharge., Sturdy roll-top design., .4 HP Automatic Sewage Ejector or Effluent pump., Full flow PVC check valve. LITTLE GIANT
Pricing Category: SR01, Stock or OAN: s, Description2: DV SOLENOID REPAIR KIT, Fits On: 075-DAS, 100-DAS, 075-ASVF, 100-ASVF, all DV, DVF, and all JTV valves RAIN BIRD CORP
Overall Height: 54", Gallon Capacity: 300, Diameter: 54", Height to Inlet: 44", Height to Outlet: 42", Manhole Diameter: 1-20" Designed to be used as a holding tank or pump tank, This tank may remain in the ground when empty, It is furnished with a watertight domed lid, It also includes a molded-in elevated pump stand on the bottom of the tank NORWESCO INC
Width: 60", Length: 102", Overall Height: 63", Gallon Capacity: 1000, Height to Inlet: 51", Height to Outlet: 48", Manhole Diameter: 2-20" Designed for durability and quick, easy installation., NORWESCO septic tanks are manufactured by means of the rotational molding process which produces a one-piece, seamless, watertight tank., Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode., Tanks are available as single compartment or double compartments, The rib design and rib placement provide superior structural integrity to the tank., These tanks come outfitted with a domed lid. NORWESCO INC
Width: 55", Length: 116", Overall Height: 70", Gallon Capacity: 1250, Height to Inlet: 59", Height to Outlet: 56", Manhole Diameter: 2-20" Designed for durability and quick, easy installation., NORWESCO septic tanks are manufactured by means of the rotational molding process which produces a one-piece, seamless, watertight tank., Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode., Tanks are available as single compartment or double compartments, The rib design and rib placement provide superior structural integrity to the tank., These tanks come outfitted with a domed lid. NORWESCO INC
Width: 55", Length: 135", Overall Height: 70", Gallon Capacity: 1500, Height to Inlet: 59", Height to Outlet: 56", Manhole Diameter: 2-20" Designed for durability and quick, easy installation., NORWESCO septic tanks are manufactured by means of the rotational molding process which produces a one-piece, seamless, watertight tank., Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode., Tanks are available as single compartment or double compartments, The rib design and rib placement provide superior structural integrity to the tank., These tanks come outfitted with a domed lid. NORWESCO INC
Width: 51", Length: 101", Overall Height: 47", Gallon Capacity: 500, Height to Inlet: 36", Height to Outlet: 33", Manhole Diameter: 1-20" Designed for durability and quick, easy installation., NORWESCO septic tanks are manufactured by means of the rotational molding process which produces a one-piece, seamless, watertight tank., Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode., Tanks are available as single compartment or double compartments, The rib design and rib placement provide superior structural integrity to the tank., These tanks come outfitted with a domed lid. NORWESCO INC
Width: 60", Length: 102", Overall Height: 63", Gallon Capacity: 1000, Height to Inlet: 51", Height to Outlet: 48", Manhole Diameter: 2-20" Designed for durability and quick, easy installation., NORWESCO septic tanks are manufactured by means of the rotational molding process which produces a one-piece, seamless, watertight tank., Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode., Tanks are available as single compartment or double compartments, The rib design and rib placement provide superior structural integrity to the tank., These tanks come outfitted with a domed lid. NORWESCO INC
Width: 55", Length: 135", Overall Height: 70", Gallon Capacity: 1500, Height to Inlet: 59", Height to Outlet: 56", Manhole Diameter: 2-20" Designed for durability and quick, easy installation., NORWESCO septic tanks are manufactured by means of the rotational molding process which produces a one-piece, seamless, watertight tank., Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode., Tanks are available as single compartment or double compartments, The rib design and rib placement provide superior structural integrity to the tank., These tanks come outfitted with a domed lid. NORWESCO INC
Width: 52", Length: 100", Overall Height: 59", Gallon Capacity: 750, Height to Inlet: 49", Height to Outlet: 46", Manhole Diameter: 2-20" Designed for durability and quick, easy installation., NORWESCO septic tanks are manufactured by means of the rotational molding process which produces a one-piece, seamless, watertight tank., Polyethylene is unaffected by soil chemicals and by the chemicals and gases present in sewage, so NORWESCO septic tanks will not rust or corrode., Tanks are available as single compartment or double compartments, The rib design and rib placement provide superior structural integrity to the tank., These tanks come outfitted with a domed lid. NORWESCO INC
S0290.jpg Swing Pipe, 2’ Coil
Locke Part #: S0290 MFG Part #: EZP-2
Size: 1/2", Length: 2 ft. Primary Application: Residential Installation, Minimizes system depth with large sprinklers, Allows for more accurate positioning of sprinklers, Allows circumvention of obstacles in tough terrain such as trees, rocks, and other barriers, Flexible tubing for easy installation of sprinklers RAIN BIRD CORP
S0056.jpg Switch for S0031 and S0032 Pumps
Locke Part #: S0033 MFG Part #: 599117
LITTLE GIANT
S0056.jpg Switch for S0037 and S0038 Pumps
Locke Part #: S0035 MFG Part #: 599211
LITTLE GIANT
LITTLE GIANT
S0056.jpg Switch for S0045 and S0039 Pumps
Locke Part #: S0044 MFG Part #: 599318
LITTLE GIANT
S0056.jpg Switch for S0055 Pump
Locke Part #: S0034 MFG Part #: 599210
LITTLE GIANT
S25.jpg Switch for S25
Locke Part #: S0046 MFG Part #: 950341
Has automatic overload protector with automatic reset. 1-1/4" Discharge pipe. Float activated switch. 2,820 GPH with 5' lift pipe. 115V, 60 Hz, 5.8 amps. Polypropylene base & strainer. LITTLE GIANT
S0050.jpg Switch for S50
Locke Part #: S0047 MFG Part #: 599300
LITTLE GIANT
S0050.jpg Switch for S50
Locke Part #: S0058 MFG Part #: 950323
LITTLE GIANT
20101 Tan Low Voltage.jpg Tan Low Voltage
Locke Part #: S0302 MFG Part #: 20111
KING INNOVATION 719362201115
The Test Orifice is used with the In-line, Flow Test Kit. Use the appropriate, orifice, as sprinklers vary in orifice, size. Uponor
115 Volt, Sewage ejector pump 15' cord, 80 GPM @5'., 18" x 30" polyethylene basin with structural foam 1-piece cover., Handles liquids & solid waste materials., Cover can be used as: 2" vent/ 3" discharge, 3" vent/ 2" discharge, or 2" vent/ 2" discharge., Sturdy roll-top design., .4 HP Automatic Sewage Ejector or Effluent pump., Full flow PVC check valve. LITTLE GIANT
E0294.jpg Union Set 3/4" CxC for E0307
Locke Part #: E0308 MFG Part #: 529911
For domestic hot water systems, so you will have instant hot water at any faucet. Also used in solar systems. Won't rust. GRUNDFOS PUMPS CORP
Overall Height: 91", Gallon Capacity: 2500, Diameter: 95", Fill Opening: 16", Outlet/Drain Specification: 2" These tanks are most frequently used for bulk storage and mobile nursing applications., It features tie-down slots, built-in graduated gallon indicators, an offset fill-opening and a self-vented, slosh-proof lid. NORWESCO INC
Overall Height: 152", Gallon Capacity: 5000, Diameter: 102", Fill Opening: 16", Bottom Fitting: 2", Top Fitting: 1-1/2" The black or dark green color limits light penetration which reduces the growth of water-borne algae., These tanks are rated at 8 pounds per gallon, which means that they are for water storage only!, They should not be used for chemicals, fertilizers or any other product., Where applicable, the tanks will carry the NSF approval. NORWESCO INC
Flow Rate: 0.6 gph, Length: 500 ft., Application: On Surface, Tubing Diameter: 1/2", Outside Diameter: 0.634", Inside Diameter: 0.536", Operating Pressure: 8.5 to 60 psi, Wall Thickness: 0.049", Features: Extra Flexible, Emitter Spacing: 18", Operating Range Required Filtration: 120 mesh, Operating Range Temperature (Ambient): 125°F, Operating Range Temperature (Water): 100°F XF Dripline - 0.6 GPH, 18 in. Spacing, 500 ft. Coil, Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation, Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications, Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings, Use an Air/Vacuum Relief Valve Kit when installation is below soil, The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi, Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage RAIN BIRD CORP