Plumbing Hardware Categories

Loading ...

Loading ...

Search in: Plumbing Hardware Category

2'' 25 GPM 50 Plastic Grease Trap
Locke Part #: D5053 MFG Part #: 3925XTA02
IPEX
Package Weight: 1.015, Mfg Standards/Approvals: ANSI Z21.24/CSA 6.10 - Indoor/Outdoor, ANSI Z21.69/CSA 6.16 - Commercial Food Services, ANSI Z21.75/CSA 6.27 - Manufactured Homes, MEA Approval (Code #: 170-08-E), State of Massachusetts Approval (Code: G3-0809-34), cUPC Listed, Application: Ranges, Tankless Water Heaters, Gas Fireplaces, Space Heaters, Furnaces, Manufactured Homes, Outdoor Grills, Dryers, Rooftop Units and Boilers, Nominal Size: 1/2, Outside Diameter: 1/2, Length: 36, End Style: MNPT, Material: Stainless Steel, Color: Yellow, Finish: Epoxy Powder Coated Quick and easy installation, Corrugated stainless steel design is flexible to accommodate changes in construction specs, Connectors can be manipulated by hand making it easy to maneuver in confined areas, Reduces the need for fittings, thus reducing possible joint leaks and is cost effective for material, time and labor, Approved for use with natural, manufactured, LP (propane), and LP air mixture gases with internal line pressure no greater than 1/2 lb/sq-in (psi) (3.5kPa), CSA design certified for indoor and outdoor use, Durable 304 stainless steel (ASTM A240), Neck free design for maximum bending flexibility, 100% leak tested for quality assurance, Yellow epoxy coated gas connectors are available for extra corrosion-resistance from harsh chemicals, High quality 45 deg flare fittings (SAE J512), Rated operating temperature: -40 deg F to 150 deg F B&K LLC 883882502042
Package Weight: 14.0, Mfg Standards/Approvals: CSA Certified, MASS Approved, Nominal Size: 2, Flow Rate: 7, Type: Canplas Compact, Dimensions: 14.544 in L x 17.447 in W x 16.305 in H 14 lb IPEX 662671055163
Mfg Standards/Approvals: MASS Approved, SA Listed, Nominal Size: 2, Capacity: 20, Flow Rate: 10, Dimensions: 14.551 x 17.444 x 3.606 x 12.7 x 16.306 x 11.835 x 14.835, Type: Compact, Connection Type: No Hub/MJ Coupling, Material: Polypropylene, Color: Gray Injection molded tank, lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications, Enhanced performance, smaller footprint and no ribs where tank meets floor easy to clean, Maximum service temperature rated at 220 deg F, Molded one piece tank eliminates seams and potential leaking, Weighs up to 60% less than directly equivalent metal competitors - offers ease of installation, transport and storage, Connected using mechanical joint couplings allowing for use of various piping materials, Canplas lids supports 440 pounds of pedestrian and light duty traffic, Flexibility of installation - can be installed in-floor, on-floor or semi-recessed, Recessed silicone seal prevents unpleasant odors from leaving the interceptor, Cover is provided with an easy open latch system IPEX
Mfg Standards/Approvals: MASS Approved, SA Listed, Nominal Size: 2, Capacity: 30, Flow Rate: 15, Dimensions: 14.555 x 17.446 x 3.606 x 12.71 x 16.316 x 11.838 x 14.839, Type: Compact, Connection Type: No Hub/MJ Coupling, Material: Polypropylene, Color: Gray Injection molded tank, lid and baffels in engineered thermoplastic, that will not corrode, chip or peel, even under the most severe applications, Enhanced performance, smaller footprint and no ribs where tank meets floor easy to clean, Maximum service temperature rated at 220 deg F, Molded one piece tank eliminates seams and potential leaking, Weighs up to 60% less than directly equivalent metal competitors - offers ease of installation, transport and storage, Connected using mechanical joint couplings allowing for use of various piping materials, Canplas lids supports 440 pounds of pedestrian and light duty traffic, Flexibility of installation - can be installed in-floor, on-floor or semi-recessed, Recessed silicone seal prevents unpleasant odors from leaving the interceptor, Cover is provided with an easy open latch system IPEX
Package Weight: 40.0, Mfg Standards/Approvals: CSA Certified, UPC Listed, Nominal Size: 2, Flow Rate: 20, Type: Canplas, Dimensions: 23.5 in L x 17.502 in W x 16.304 in H 40 lb IPEX 662671390158
Mfg Standards/Approvals: CSA Certified, Mass Approved, UPC Listed, Application: Plumbing Application, Nominal Size: 2, Inlet Connection: 12.96, Type: Low Profile, Connection Type: No Hub, Color: Gray, Dimensions: 31.063 in W x 23.5 in D x 10.94 in H 25 gpm flow rate, 50 lb capacity IPEX 662671390974
Package Weight: 100.0, Mfg Standards/Approvals: CSA Certified, UPC Listed, Nominal Size: 3, Flow Rate: 50, Type: Canplas, Color: Gray, Dimensions: 31 in L x 23-1/2 in W x 23-1/2 in H 100 lb IPEX 662671390110
Package Weight: 100.0, Mfg Standards/Approvals: CSA Certified, UPC Listed, Nominal Size: 4, Flow Rate: 50, Type: Canplas, Color: Gray, Dimensions: 31 in L x 23-1/2 in W x 23-1/2 in H 100 lb IPEX 662671390134
Package Weight: 0.35, Type: Pneumatic, Pipe Size: 2 in, Working Pressure: 13 psi, Material: Natural Rubber, Dimensions: 5.81 in L x 2.38 in D Plug holds back up to 13 psi or 30 ft of head pressure, Plug design keeps work area and plumber dry no backsplash, Seals both plastic and hard to seal cast iron threaded cleanouts, Easy to install, Removable snifter valve inflation fitting is replaceable, Made from long-lasting natural rubber, Seals both cast iron and plastic pipe Oatey 675115000000
Package Weight: 0.9, Type: Pneumatic, Pipe Size: 3 in, Working Pressure: 13 psi, Material: Natural Rubber, Dimensions: 7.38 in L x 3.50 in D Plug holds back up to 13 psi or 30 ft of head pressure, Plug design keeps work area and plumber dry no backsplash, Seals both plastic and hard to seal cast iron threaded cleanouts, Easy to install, Removable snifter valve inflation fitting is replaceable, Made from long-lasting natural rubber, Seals both cast iron and plastic pipe Oatey 675115000000
Package Weight: 1.45, Type: Pneumatic, Pipe Size: 4 in, Working Pressure: 13 psi, Material: Natural Rubber, Dimensions: 8.50 in L x 4.50 in D Plug holds back up to 13 psi or 30 ft of head pressure, Plug design keeps work area and plumber dry no backsplash, Seals both plastic and hard to seal cast iron threaded cleanouts, Easy to install, Removable snifter valve inflation fitting is replaceable, Made from long-lasting natural rubber, Seals both cast iron and plastic pipe Oatey 675115000000
Package Weight: 3.5, Type: Pneumatic, Pipe Size: 6 in, Length: 6.63 in, Material: Natural Rubber, Dimensions: 6-5/8 in Dia x 11 in L Plug design keeps work area and plumber dry no backsplash, Seals both plastic and hard to seal cast iron threaded cleanouts, Easy to install, Threads into test tee, eliminating water backsplash, Removable snifter valve inflation fitting is replaceable, Made from long-lasting natural rubber, High-impact ABS threads for maximum durability, Removable and field repairable inflation valve fitting, 30 ft head, 13 psi back pressure, 25 psi inflation pressure Oatey 675115000000
Type: Center to End, Nominal Size: 1-1/2 x 13 in, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated Available in 17, 20 or budget gauge brass Oatey 41193007261
Country of Origin: CN, Type: Semi-Cast, Nominal Size: 1-1/4 x 12 in, Gauge: 17 ga, Connection Type: Push to Connect, Material: Brass, Finish: Chrome Plated, Domestic/Import: Import Easy to install Oatey 41193123428
Type: Semi-Cast, Nominal Size: 1-1/2 x 12 in, Gauge: 17 ga, Connection Type: Push to Connect, Material: Brass, Finish: Chrome Plated Easy to install Oatey 41193123800
Package Weight: 0.01, Type: Top Hat, Nominal Size: 1-1/4 in, Inside Diameter: 1-5/16 in, Outside Diameter: 1-23/32 in Oatey 41193054814
Country of Origin: CN, Type: Cast Grid Drain Patent, Height: 2-3/4 in, Material: Brass, Finish: Chrome Plated, Domestic/Import: Import 2-1/5 in Dia Oatey 41193104113
Outside Diameter: 1-1/4 in, Length: 16 in, Material: Brass, Color: Chrome Oatey 4119312572
Package Weight: 0.288, Nominal Size: 1-1/2 x 2 in, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated Made of chrome-plated 20 gauge brass, Extends and completes a plumbing drain installation, Compatible with copper plumbing, Belled-end slip joint connections Oatey 41193012432
Package Weight: 0.054, Nominal Size: 1-1/4 x 1-1/4 in, Material: Die Cast, Finish: Chrome Plated Oatey 41193006332
Package Weight: 0.07, Nominal Size: 1-1/2 x 1-1/2 in, Material: Die Cast, Finish: Chrome Plated Oatey 41193006349
Outside Diameter: 1-1/4 in, Length: 12 in, Connection Type: Threaded, Material: Brass Oatey 41193005816
Outside Diameter: 1-1/2 in, Length: 12 in, Connection Type: Threaded, Material: Brass, Color: Chrome Plated Brass construction with a chrome plated finish, Maximum working pressure of 15 psi, Extends the waste connection from your lavatory sink to the drain connection, Threaded on both ends for quick installation Oatey 41193125897
Type: 3-Part, Nominal Size: 1-1/2 in, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated 24 in center to center Oatey 41193106841
Nominal Size: 1-1/2 in, Material: Brass, Finish: Chrome Plated 16 in center to center, Slip joint connection, Budget gauge brass Oatey 41193006073
Country of Origin: UKN, Outside Diameter: 1-1/4 in, Length: 6 in, Connection Type: Slip Joint, Material: Brass 20 gauge brass, Extends and completes a plumbing drain installation, Slip joint nut and washers offer fast and secure connection, Easy installation, Made of chrome-plated brass Oatey 41193125637
Outside Diameter: 1-1/4 in, Length: 8 in, Connection Type: Slip Joint, Material: Brass 20 gauge brass, Extends and completes a plumbing drain installation, Slip joint nut and washers offer fast and secure connection, Easy installation, Made of chrome-plated brass Oatey 41193125651
Outside Diameter: 1-1/4 in, Length: 12 in, Connection Type: Slip Joint, Material: Brass 20 gauge brass, Extends and completes a plumbing drain installation, Slip joint nut and washers offer fast and secure connection, Easy installation, Made of chrome-plated brass Oatey 41193125699
Outside Diameter: 1-1/2 in, Length: 8 in, Connection Type: Slip Joint, Material: Brass Extends and completes a plumbing drain installation, Slip joint nut and washers offer fast and secure connection, Easy to install, Chrome plated finish, 20 ga Oatey 41193125798
Outside Diameter: 1-1/2 in, Length: 12 in, Connection Type: Slip Joint, Material: Brass 20 gauge brass, Extends and completes a plumbing drain installation, Slip joint nut and washers offer fast and secure connection, Easy installation, Made of chrome-plated brass Oatey 41193125842
Type: Double, Nominal Size: 1-1/4 in, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated, Dimensions: 2 in L Extends and completes a plumbing drain installation, Belled-end slip joint connections Oatey 41193011794
Pipe Size: 1-1/2 in, Length: 6 in, Gauge: 20 ga, Connection: Flanged, Material: Brass, Finish: Chrome Plated Tubular flanged design, 100 deg F maximum working temperature Oatey 41193126023
Pipe Size: 1-1/2 in, Length: 8 in, Gauge: 20 ga, Connection: Flanged, Material: Brass, Finish: Chrome Plated Tubular flanged design, 100 deg F maximum working temperature Oatey 41193126191
Pipe Size: 1-1/2 in, Length: 12 in, Gauge: 20 ga, Connection: Flanged, Material: Brass, Finish: Chrome Plated Tubular flanged design, 100 deg F maximum working temperature Oatey 41193126276
Pipe Size: 1-1/2 in, Length: 16 in, Gauge: 20 ga, Connection: Flanged, Material: Brass, Finish: Chrome Plated Double flanged, Tubular flanged design, 100 deg F maximum working temperature Oatey 41193126337
Type: Tubular, Pipe Size: 1-1/2 in, Length: 8 in, Gauge: Budget, Connection: Compression, Material: Brass Oatey 41193049834
Nominal Size: 1-1/4 in, Angle: 45 deg, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated Slip joint connection Oatey 41193055675
Nominal Size: 1-1/2 in, Gauge: 20 ga, Specifications: 45 deg, Material: Brass, Finish: Chrome Plated Oatey 41193055682
Type: 3-Way, Nominal Size: 1-1/2 in, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated Oatey 41193055705
Nominal Size: 1-1/4 in, Angle: 90 deg, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated Slip joint connection Oatey 41193012470
Nominal Size: 1-1/2 in, Angle: 90 deg, Gauge: 20 ga, Material: Brass, Finish: Chrome Plated Slip joint connection Oatey 41193012487
Fast and easy to install, Easy to cut and size, Easily accommodate tes supply line offsets, Clean appearance and aesthetics Oatey 41193000897
Suitable For Use With: Lavatory Sink Fast and easy to install, Easy to cut and size, Easily accommodate tes supply line offsets, Clean appearance and aesthetics Oatey 41193000859
Suitable For Use With: Lavatory Sink Fast and easy to install, Easy to cut and size, Easily accommodate tes supply line offsets, Clean appearance and aesthetics Oatey 41193000866
Pipe Size: 1-1/2 in, Material: Plastic, Color: White Oatey 41193054593
Country of Origin: CN, Package Length: 8, Package Height: 3, Package Width: 3, Package Weight: 0.095, Mfg Standards/Approvals: ASME A112.18.2/CSA B125.2, Drain Material: Metal, Finish: Chrome Plated, Dimensions: 2-3/4 in W, Domestic/Import: Import Supply lines not included, For use with sinks without overflow, All metal construction push pop, Tailpiece chrome plated for all finishes DELTA 34449588201
Country of Origin: CN, Package Length: 8, Package Height: 3, Package Width: 3, Package Weight: 0.095, Mfg Standards/Approvals: ASME A112.18.2/CSA B125.2, Grid Material: Metal, Finish: Venetian Bronze, Dimensions: 2-3/4 in W, Domestic/Import: Import Supply lines not included, All metal construction push pop, Tailpiece chrome plated for all finishes, For use with sinks without overflow DELTA 34449588225
Country of Origin: CN, Package Length: 8, Package Height: 3, Package Width: 3, Package Weight: 0.985, Mfg Standards/Approvals: ASME A112.18.2/CSA B125.2, Grid Material: Metal, Finish: Brilliance Stainless, Dimensions: 2-3/4 in W, Domestic/Import: Import Supply lines not included, All metal construction push pop, Tailpiece chrome plated for all finishes, For use with sinks without overflow DELTA 34449588218
Pack Quantity: 1, Country of Origin: US, Package Length: 2.03, Package Height: 2, Package Width: 2.05, Package Weight: 0.0398, Domestic/Import: Domestic DELTA 34449527736
Pack Quantity: 1, Country of Origin: US, Package Length: 2.25, Package Height: 0.75, Package Width: 0.75, Package Weight: 0.023, Domestic/Import: Domestic DELTA 34449527743
Pack Quantity: 1, Country of Origin: CN, Package Length: 8, Package Height: 3.25, Package Width: 7.13, Package Weight: 0.96, Mfg Standards/Approvals: ASME A112.18.2/CSA B125.2, Type: Traditional, Overall Width: 2-1/8 in W, Overall Height: 8 in, Material: Plastic, Finish: Venetian Bronze, Domestic/Import: Import Finished grid strainer drain type, Supply lines not included, Leland collection DELTA 34449541251
Pack Quantity: 1, Country of Origin: CN, Package Length: 7.5, Package Height: 3.5, Package Width: 7.5, Package Weight: 0.945, Mfg Standards/Approvals: ASME A112.18.2/CSA B125.2, Type: Traditional, Overall Width: 2-1/8 in W, Overall Height: 8 in, Material: Plastic, Finish: Brilliance Stainless, Domestic/Import: Import Finished grid strainer drain type, Supply lines not included, Leland collection DELTA 34449541268
Country of Origin: US, Package Length: 12, Package Height: 3, Package Width: 5, Package Weight: 1.04, Drain Material: Brass, Finish: Chrome Plated, Domestic/Import: Domestic DELTA 34449056519
Pack Quantity: 1, Country of Origin: CN, Package Length: 7.95, Package Height: 3.25, Package Width: 7.5, Package Weight: 1.27, Drain Material: Metal, Finish: Brilliance Stainless, Domestic/Import: Import DELTA 34449525121
Country of Origin: CN, Package Length: 8, Package Height: 3, Package Width: 3, Package Weight: 0.095, Mfg Standards/Approvals: ASME A112.18.2/CSA B125.2, Series: Zura, Grid Material: Metal, Finish: Brilliance Champagne Bronze, Domestic/Import: Import Metal push pop-up drain type, Supply lines not included, All metal construction push pop, Tailpiece chrome plated for all finishes, For use with sinks without overflow DELTA 34449645997
Country of Origin: CN, Package Length: 8, Package Height: 3, Package Width: 3, Package Weight: 0.095, Mfg Standards/Approvals: ASME A112.18.2/CSA B125.2, Series: Zura, Grid Material: Metal, Finish: Brilliance Polished Nickel, Dimensions: 2-3/4 in W, Domestic/Import: Import Metal push pop-up drain type, Supply lines not included, All metal construction push pop, Tailpiece chrome plated for all finishes, For use with sinks without overflow DELTA 34449705073
Pack Quantity: 10, Weight: 27, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 1-1/4 in, End Style: MNPT, Length: 12 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000100
Pack Quantity: 10, Weight: 18, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 1-1/4 in, End Style: MNPT, Length: 6 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000124
Pack Quantity: 10, Weight: 16.9, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 1/2 in, End Style: MNPT, Length: 12 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000025
Pack Quantity: 10, Weight: 12.2, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 1/2 in, End Style: MNPT, Length: 6 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000049
Pack Quantity: 10, Weight: 24.1, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 1 in, End Style: MNPT, Length: 12 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000148
Pack Quantity: 10, Weight: 15.3, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 1 in, End Style: MNPT, Length: 6 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000162
Pack Quantity: 10, Weight: 22.9, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 3/4 in, End Style: MNPT, Length: 12 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000223
Pack Quantity: 10, Weight: 14.5, Mfg Standards/Approvals: ASTM A53, Type: Straight, Nominal Size: 3/4, End Style: MNPT, Length: 6, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000247
Pack Quantity: 10, Weight: 1.22, Mfg Standards/Approvals: CSA Certificate No 2728525, ICC-ES Report No PMG 1019, IAPMO File No C-3250, Nominal Size: 1/2 in, End Style: MNPT, Length: 4-1/2 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Black oxide coating after all threading, forming and welding, 72.5 deg angle FLASHSHIELD 840889000513
Pack Quantity: 20, Material: Sheet Metal, Finish: Galvanized Fits 3/8 to 1 in CSST, 16 ga FLASHSHIELD 840889004146
Pack Quantity: 10, Weight: 16, Material: Metal, Dimensions: 4-1/2 in W X 4 in H Fits 3-PORTMAN, 4-PORTMAN, 5-PORTMAN and 111596-08, MBRACE-1 mounting kit made of 16 ga galvanized sheet metal FLASHSHIELD 084088900418
Pack Quantity: 10, Weight: 16, Material: Metal, Dimensions: 4-3/4 in W X 4 in H Fits 5-PORTMAN-1 5-PORTMAN-2 5-PORTMAN-3 4-PORTMAN-2, MBRACE-3 mounting kit made of 14 ga galvanized sheet metal FLASHSHIELD 840889004559
FlashShield STUB-BRACE Stub Bracket, Steel
Locke Part #: F0887 MFG Part #: STUB-BRACE
Pack Quantity: 1, Mfg Standards/Approvals: ASTM A53, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Exterior plating - Black oxide coating after all threading, forming and welding FLASHSHIELD 840889000315
Pack Quantity: 10, Weight: 18.5, Mfg Standards/Approvals: ASTM A53, Nominal Size: 3/4 x 1/2 in, End Style: NPT, Length: 1-1/2 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Exterior plating - Black oxide coating after all threading, forming and welding FLASHSHIELD 840889021273
Pack Quantity: 10, Weight: 21.6, Mfg Standards/Approvals: ASTM A53, Nominal Size: 3/4 in, End Style: NPT, Length: 2-1/4 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation FLASHSHIELD 840889021303
Pack Quantity: 10, Weight: 19.9, Mfg Standards/Approvals: ASTM A53, Nominal Size: 3/4 x 1/2, End Style: NPT, Length: 2-1/4, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Exterior plating - Black oxide coating after all threading, forming and welding FLASHSHIELD 840889021280
Pack Quantity: 10, Weight: 13.3, Mfg Standards/Approvals: ASTM A53, Nominal Size: 1/2 in, End Style: NPT, Length: 2-1/4 in, Material: Steel, Finish: Black Oxide Reduces the number of joints in the system where contractors typically fabricate stub-outs from rigid pipe nipples, elbows and couplings, Provides a fixed-point termination for installations where the appliances are not yet installed, Creates a more polished look to the overall installation, Schedule 40 steel pipe complying with material standard ASTM A-53, Exterior plating - Black oxide coating after all threading, forming and welding FLASHSHIELD 840889021266
Pack Quantity: 24, Weight: 11.2, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 3/4 in, End Style: FNPT, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020849
Pack Quantity: 24, Weight: 11.2, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 3/4 x 1/2 in, End Style: FNPT, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020832
Pack Quantity: 24, Weight: 7.6, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 1/2 in, End Style: FNPT, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020825
Pack Quantity: 24, Weight: 9.7, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 3/4 x 1/2 in, End Style: NPT, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD
Pack Quantity: 12, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 1 x 3/4 in, End Style: NPT, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020863
Pack Quantity: 6, Weight: 7.6, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 3/4 x 3/4 x 1/2 in, End Style: Run x Run x Tee, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020917
Pack Quantity: 12, Weight: 16.5, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 3/4 in, End Style: Run x Run x Tee, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020887
Pack Quantity: 6, Weight: 7.3, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 3/4 x 1/2 x 1/2 in, End Style: Run x Run x Tee, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020900
Pack Quantity: 6, Weight: 13.4, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 1 in, End Style: Run x Run x Tee, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020894
Pack Quantity: 12, Weight: 10.8, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 1/2 in, End Style: Run x Run x Tee, Material: Brass Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable FLASHSHIELD 840889020870
Pack Quantity: 12, Mfg Standards/Approvals: CSA Certificate No 2728525, IAPMO File No C-3250 and Report No 0239, ICC-ES Report No PMG 1066 and PMG 1155, Nominal Size: 3/4, End Style: NPT For "Fixed-Point" termination on floor or wall, Approved for concealed use, Tool-less flare fitting design, Metal-to-metal seal, Self-guiding fitting assembly, Jacket Lock, Metal locking, Fully reusable fitting FLASHSHIELD 840889021099
Pack Quantity: 12, Weight: 6.1, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 3/4 in, End Style: NPT Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable, Straight fittings connect the flexible gas tubing to gas supply, distribution manifolds or gas appliances, Couplings allow for the splicing and additions to the flexible gas tubing, Tee fittings create a branch line on tubing runs, Termination fittings create a fixed point stub-out on a wall or floor surface, Termination bracket fittings provide a secure attachment point for key-valves and as an alternate termination point, 1 in flange thread, 1-9/16 in hex nut, 1-3/8 in hex fitting, 45 ft-lb assembled torque, 25 psi maximum approved operating pressure, -40 to 160 deg F operating temperature FLASHSHIELD 840889021143
Pack Quantity: 6, Weight: 10.8, Mfg Standards/Approvals: CSA Certificate No 2728525, IAPMO File No C-3250 and Report No 0239, ICC-ES Report No PMG 1066 and PMG 1155, Nominal Size: 1 in, End Style: NPT For "Fixed-Point" termination on floor or wall, Approved for concealed use, Tool-less flare fitting design, Metal-to-metal seal, Self-guiding fitting assembly, Jacket Lock, Metal locking, Fully reusable fitting FLASHSHIELD 840889021105
Pack Quantity: 12, Weight: 4.2, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 1/2 in, End Style: NPT Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable, Straight fittings connect the flexible gas tubing to gas supply, distribution manifolds or gas appliances, Couplings allow for the splicing and additions to the flexible gas tubing, Tee fittings create a branch line on tubing runs, Termination fittings create a fixed point stub-out on a wall or floor surface, Termination bracket fittings provide a secure attachment point for key-valves and as an alternate termination point, 3/4 in flange thread, 1-1/4 in hex nut, 1-1/8 in hex fitting, 35 ft-lb assembled torque, 25 psi maximum approved operating pressure, -40 to 160 deg F operating temperature FLASHSHIELD 840889021136
Pack Quantity: 6, Weight: 6.9, Mfg Standards/Approvals: ANSI LC 1, (CSA) ANSI LC 1 Fuel Gas Piping Systems Using Corrugated Stainless Steel Tubing, (IAPMO) International Association of Plumbing and Mechanical Officials File No C-3250, (ICC) International Code Council Evaluation Report No PMG 1019, Nominal Size: 1 in, End Style: NPT Metal lock for enhanced continuity, Tool-less flare design, no special tools are required, Metal-to-metal seal, with no split rings and O-rings or gaskets, Self-guiding assembly to ensure a perfectly even flare, Exclusive, patented Jacket-Lock fitting eliminates exposed stainless steel beyond the nut, All components are fully reusable, Straight fittings connect the flexible gas tubing to gas supply, distribution manifolds or gas appliances, Couplings allow for the splicing and additions to the flexible gas tubing, Tee fittings create a branch line on tubing runs, Termination fittings create a fixed point stub-out on a wall or floor surface, Termination bracket fittings provide a secure attachment point for key-valves and as an alternate termination point FLASHSHIELD 840889021211
Flexible Qwik Trap, PVC, Domestic
Locke Part #: G0243 MFG Part #: FT-150
Pack Quantity: 20, Country of Origin: US, Package Weight: 0.31, Domestic/Import: Domestic, Material: PVC, Suitable For Use With: 1-1/4 and 1-1/2 in Sink Drain, Type: Flexible, Warranty: Limited Fernco 018578016378
Pack Quantity: 1, Country of Origin: US, Package Weight: 0.74, Type: Snap-Ease, Length: 8 in, Width: 8 in, Material: ABS, Color: White, Domestic/Import: Domestic Constructed of high-impact white ABS, Can be painted or wallpapered, Easily installed to eliminate unsightly drywall repairs, Provides for future access to plumbing or wiring behind wall, 5/8 in depth, You need it we got it item Jones Stephens 717510050080
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.64, Type: Snap-Ease, Length: 14 in, Width: 14 in, Material: ABS, Color: White, Domestic/Import: Domestic Constructed of high-impact white ABS, Can be painted or wallpapered, Easily installed to eliminate unsightly drywall repairs, Provides for future access to plumbing or wiring behind wall, 5/8 in depth, You need it we got it item Jones Stephens 717510050141
Pack Quantity: 6, Type: Double Offset, Length: 21-7/8 in, Material: Steel, Finish: Chrome Plated 1/2 in supply tubes, Pair of double offset Jones Stephens 717510490213
Pack Quantity: 8, Package Weight: 3.46, Mfg Standards/Approvals: ASTM C564, UPC Certified, Type: No Caulk, Pipe Size: 3 in, Material: Cast Iron, Color: Blue Neoprene gasket meets ASTM C564, Ideal for both repair and new construction, Easy to install reduces installation time by 80%, Push over cast iron or plastic pipe, anchor to floor and tighten bolts, 2 in depth, You need it we got it item Jones Stephens 717510403206
Pack Quantity: 8, Package Weight: 3.51, Mfg Standards/Approvals: ASTM C564, UPC Certified, Type: No Caulk, Pipe Size: 4 in, Material: Cast Iron, Color: Blue Neoprene gasket meets ASTM C564, Ideal for both repair and new construction, Easy to install reduces installation time by 80%, Push over cast iron or plastic pipe, anchor to floor and tighten bolts, 2 in depth, You need it we got it item Jones Stephens 717510404203
Pack Quantity: 10, Package Weight: 2.23, Mfg Standards/Approvals: ASTM C564, Type: Inside Caulk, Pipe Size: 4 x 1-1/2 in, Material: Cast Iron Notched and slotted, Inside caulk connection Jones Stephens 717510414110
Pack Quantity: 8, Package Weight: 2.58, Mfg Standards/Approvals: ASTM C564, Type: Inside Caulk, Pipe Size: 4 x 2 in, Material: Cast Iron Notched and slotted, Inside caulk connection Jones Stephens 717510414202
Pack Quantity: 8, Package Weight: 3.27, Mfg Standards/Approvals: ASTM C564, Type: Inside Caulk, Pipe Size: 4 x 2-1/2 in, Material: Cast Iron Notched and slotted, Inside caulk connection Jones Stephens 717510414219
Pack Quantity: 4, Package Weight: 4.61, Mfg Standards/Approvals: ASTM C564, Type: Inside Caulk, Pipe Size: 4 in, Material: Cast Iron Notched and slotted, Inside caulk connection Jones Stephens 717510414400
Pack Quantity: 4, Package Weight: 3, Type: Inside Caulk Offset, Pipe Size: 4 x 4 x 2 in, Material: Cast Iron 2 in offset Jones Stephens 717510434408
Pack Quantity: 6, Country of Origin: US, Package Weight: 0.76, Mfg Standards/Approvals: ASTM C564, Type: 2-Finger, Pipe Size: 4 x 3 in, Material: PVC, Domestic/Import: Domestic Positive seal, Redesigned to fit oblong horns, Easy to push to install or adjust, Choice of closet bolt slots or slide positioning, Double lip seal gasket, Pushes easily into 3 in or 4 in cast iron or SCH 40 DWV PVC pipe, ASTM C-564 rubber gasket, No tear out or caulking required of existing pipe, Patent No 5,937,450, Can be used on PVC, ABS, or cast iron pipe and on old lead pipe that is in good condition, Flush fit, You need it we got it item Jones Stephens 717510047431
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.7, Pipe Size: 3 in, Material: PVC, Domestic/Import: Domestic 4 in long shank, Fits inside 3 in pipe SCH 40 DWV pipe, Adjustable swivel ring, 4 in barrel, Hub fit, Less knockout Jones Stephens 717510553062
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.27, Pipe Size: 3 x 4 in, Material: PVC, Domestic/Import: Domestic 6 in long shank, Can be cut to desired length, Swivel ring, Less knockout, Fits over 3 in or inside 4 in SCH 40 DWV pipe Jones Stephens 717510536003
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.14, Inside Diameter: 3-3/4 in, Outside Diameter: 7 in, Pipe Size: 3 x 4 in, Thickness: 3/8 in, Material: PVC, Domestic/Import: Domestic 6 in long shank, Can be cut to desired length, Swivel ring, 6 in spigot height, 1/4 in bolt hole, 6-1/8 in center to center bolt hole, Less knockout, Fits over 3 in or inside 4 in SCH 40 DWV pipe Jones Stephens 717510537000
Pack Quantity: 1, Country of Origin: US, Package Weight: 1.52, Type: Inside, Cleanout Size: 4 in, Cover Size: 4-1/2 in Dia, Cover Material: Nickel Bronze, Material: PVC, Domestic/Import: Domestic Installed after concrete is poured, No mess with protective tape, Save time with installation, 4-1/2 in nickel bronze round cover, You need it we got it item Jones Stephens 717510601701
Pack Quantity: 1, Country of Origin: US, Package Weight: 0.955, Type: Inside, Cleanout Size: 3 in, Cover Size: 3-1/2 in Dia, Cover Material: Nickel Bronze, Material: PVC, Domestic/Import: Domestic Installed after concrete is poured, No mess with protective tape, Save time with installation, 3-1/2 in nickel bronze round cover, You need it we got it item Jones Stephens 717510098822
Pack Quantity: 1, Country of Origin: US, Package Weight: 1.4, Mfg Standards/Approvals: NSF Approved, Nominal Size: 4 in, Drain Material: PVC, Finish: Nickel Bronze, Domestic/Import: Domestic Strainer is the same diameter as the pipe to provide full coverage every time, Installed after concrete is poured, No mess with protective tape, Save time with installation, With 4-1/2 in round strainer Jones Stephens 717510152746
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.06, Pipe Size: 1/2 in, Length: 5-1/4 in, Domestic/Import: Domestic Combination test plug and stub-out for drop eared ell, No tools required-manual installation allows for no time wasted applying and removing thread tape after each use, Cost-effective, No thread seal required, Reusable-long lasting, Smooth at thread end for easy plastering, Time and labor savings, You need it we got it item Jones Stephens 717510540505
Pack Quantity: 1, Country of Origin: US, Suitable For Use With: Fit-All Drain Hose for Washing Machine, Dimensions: 5 ft L, Domestic/Import: Domestic Industrial quality, 1/2 in ID EPDM rubber for hot and cold use, Polyester yarn reinforcement, -40 to 190 deg F temperature, Stamped brass ends and crimps, 200 psi working, 3/8 in ID rubber for hot or cold use, Standard female hose threads, Bursting pressure 800 lb/sq-in, Individually bagged Jones Stephens 717510046168
Pack Quantity: 1, Type: Lift and Lock Pop-Up, Nominal Size: 1-1/4 in, Drain Material: Brass, Finish: Chrome Plated, Dimensions: 9-1/8 in L Blister card packaging, Without overflow holes Jones Stephens 717510350302
Pack Quantity: 200, Country of Origin: US, Package Weight: 0.24, Suitable For Use With: Extension Cover, Specifications: 2 in, Material: Brass, Dimensions: 2-3/8 in OD, Domestic/Import: Domestic Countersunk plug tapped 1/4 - 20 in Jones Stephens 717510542004
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.42, Suitable For Use With: Extension Cover, Specifications: 3 in, Material: Brass, Dimensions: 3-3/8 in OD, Domestic/Import: Domestic Countersunk plug tapped 1/4 - 20 in Jones Stephens 717510543001
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.59, Suitable For Use With: Extension Cover, Specifications: 3-1/2 in, Material: Brass, Dimensions: 3-7/8 in OD, Domestic/Import: Domestic Countersunk plug tapped 1/4 - 20 in Jones Stephens 717510543506
Pack Quantity: 80, Country of Origin: US, Package Weight: 0.65, Suitable For Use With: Extension Cover, Specifications: 4 in, Material: Brass, Dimensions: 4-1/2 in OD, Domestic/Import: Domestic Countersunk plug tapped 1/4 - 20 in Jones Stephens 717510544404
Pack Quantity: 30, Country of Origin: US, Package Weight: 1.46, Suitable For Use With: Extension Cover, Specifications: 6 in, Material: Brass, Dimensions: 6-1/2 in OD, Domestic/Import: Domestic Countersunk plug tapped 1/4 - 20 in Jones Stephens 717510546002
Pack Quantity: 4, Country of Origin: US, Package Weight: 1.66, Type: Mechanical, Pipe Size: 6 in, Length: 2-1/8 in, Dimensions: 5-1/2 to 6-3/4 in Dia, Domestic/Import: Domestic Galvanized steel flanges, Fits cast iron and plastic pipe, Neoprene rubber gasket, Molded rubber gasket, You need it we got it item Jones Stephens 717510310061
Pack Quantity: 25, Country of Origin: US, Connection Type: Slip x Spigot, Domestic/Import: Domestic, Material: PVC, Nominal Size: 1/2 x 3/4 in, Warranty: Limited Lasco 25528772857
Pack Quantity: 100, Country of Origin: US, Package Length: 10.5, Package Width: 21, Package Weight: 0.04, Nominal Size: 1/2 in, Material: Plastic, Domestic/Import: Domestic Easy to install, Reduces wasted water, Increased energy savings, Delivers hot water fast, Greater temperature and pressure balance during multiple fixture use, Complete control of the plumbing system from a central location, 1-1/4 in internal reservoirs help maintain equal pressure during operation, Pls plastic (polysulfone) resist aggressive water and corrosion, 160 psi pressure, 180 deg C Viega 691514360034
Pack Quantity: 10, Material: Cast Brass, Specifications: 3/4 in MIP x 1/2 in FIP Matco-Norca 8264807747
Oatey 43519 Closet Flange Spacer, PVC
Locke Part #: R0932 MFG Part #: 43519
Nominal Size: 1/4 in, Material: PVC, Dimensions: 1/4 in Thk Oatey 38753435190
Package Weight: 1.05, Pipe Size: 4 in, Material: Plastic/PVC, Color: White PVC construction, Rubber compression gasket enables the flange to be used on many types of cast iron piping, 3 stainless steel bolts are tightened to compress the rubber gasket to secure the flange to the existing piping, Easy to use, Compression joint provides up to 3 in of adjustment to the riser, Use as a replacement flange for broken flanges Oatey 38753435398
Package Weight: 0.003, Type: Beveled, Inside Diameter: 1-1/4 in, Outside Diameter: 1-29/64 in, Material: Polyethylene, Dimensions: 7/64 in Thk Oatey 41193054821
Package Weight: 0.006, Type: Regular, Nominal Size: 1-1/4 in, Inside Diameter: 1-1/4 in, Outside Diameter: 1-7/16 in, Material: Rubber, Dimensions: 5/32 in Thk Oatey 41193054852
Package Weight: 1, Type: Regular, Nominal Size: 1-1/2 in, Inside Diameter: 1-1/2 in, Outside Diameter: 1-3/4 in, Material: Rubber, Dimensions: 3/16 in Thk Oatey 41193054869
Package Weight: 0.09, Diameter: 1-1/2 in, Working Pressure: 15 psi, Material: PVC, Color: White Oatey End-Cap test caps are a solvent weld test cap designed for hydrostatic pressure testing up to 17 psi or 40 ft head pressure, End cap test caps deep design provides extra sealing strength, End cap test caps can be used on SCH 40 ABS or PVC DWV piping Oatey 38753334684
Package Weight: 0.006, Diameter: 2 in, Working Pressure: 15 psi, Material: PVC, Color: White Oatey End-Cap test caps are a solvent weld test cap designed for hydrostatic pressure testing up to 17 psi or 40 ft head pressure, End cap test caps deep design provides extra sealing strength, End cap test caps can be used on SCH 40 ABS or PVC DWV piping Oatey 38753334707
Package Weight: 0.05, Diameter: 3 in, Working Pressure: 15 psi, Material: PVC, Color: White Oatey End-Cap test caps are a solvent weld test cap designed for hydrostatic pressure testing up to 17 psi or 40 ft head pressure, End cap test caps deep design provides extra sealing strength, End cap test caps can be used on SCH 40 ABS or PVC DWV piping Oatey 38753334721
Package Weight: 0.05, Diameter: 4 in, Working Pressure: 15 psi, Material: PVC, Color: White Oatey End-Cap test caps are a solvent weld test cap designed for hydrostatic pressure testing up to 17 psi or 40 ft head pressure, End cap test caps deep design provides extra sealing strength, End cap test caps can be used on SCH 40 ABS or PVC DWV piping Oatey 38753334745
Package Weight: 0.15, Type: Mechanical, Pipe Size: 2 in, Working Pressure: 17 psi, Material: ABS, Dimensions: 2.17 in Plug is rated for 17 psi or 40 ft of head pressure, Extra large zinc wing nut for ease of tightening, no wrench required, Natural rubber o-ring for excellent expansion and memory, ABS glass reinforced plates for added strength, Zinc-plated carriage bolt resists rust and corrosion Oatey 675115000000
Package Weight: 0.3, Type: Mechanical, Pipe Size: 3 in, Working Pressure: 17 psi, Material: ABS, Dimensions: 3 to 3.1 in Dia Plug is rated for 17 psi or 40 ft of head pressure, Extra large zinc wing nut for ease of tightening, no wrench required, Natural rubber o-ring for excellent expansion and memory, ABS glass reinforced plates for added strength, Zinc-plated carriage bolt resists rust and corrosion Oatey 675115000000
Package Weight: 0.5, Type: Mechanical, Pipe Size: 4 in, Working Pressure: 17 psi, Material: ABS, Dimensions: 4.06 in Plug is rated for 17 psi or 40 ft of head pressure, Extra large zinc wing nut for ease of tightening, no wrench required, Natural rubber o-ring for excellent expansion and memory, ABS glass reinforced plates for added strength, Zinc-plated carriage bolt resists rust and corrosion Oatey 675115000000
Package Weight: 0.9, Suitable For Use With: 1/4 Turn F1960 Low Lead Ball Valve, Material: Polystyrene, Dimensions: 3-1/4 in W x 4-1/2 in H x 2-3/8 in D Preloaded nails, Ridgid or left hand installation, Provides quick, safe water supply and shut-off for refrigerator ice maker and water dispenser, No support bracket needed, Snap-on faceplate frame, Box made of high impact polystyrene, 5 in width x 6 in H faceplate, Without hammer Oatey 38753391328
Package Weight: 0.8, Suitable For Use With: 1/4 Turn C Brass Ball Valve, Material: Polystyrene, Dimensions: 3-1/4 in W x 4-1/2 in H x 2-3/8 in D Preloaded nails, Ridgid or left hand installation, Provides quick, safe water supply and shut-off for refrigerator ice maker and water dispenser, No support bracket needed, Snap-on faceplate frame, Box made of high impact polystyrene, 5 in width x 6 in H faceplate, Without hammer Oatey 38753391342
Suitable For Use With: Quadtro Center and Offset Washing Machine Outlet Box, Material: Plastic, Dimensions: 11-3/4 in W x 10-1/8 in H Oatey 38753343105
Package Weight: 1.7, Series: Quadtro, Suitable For Use With: Washing Machine, Material: Polystyrene, Dimensions: 8-3/4 in W x 7-1/2 in H x 3-5/8 in D 2 in drain opening fits PVC or ABS SCH 40 DWV pipe, Easy to remove knockout, patent pending hammer valves, Snap-on faceplate frame accommodates up to 1 in drywall, Box made of high impact polystyrene, Top or bottom valve mount, 4 support brackets included for mounting, Easy installation lock and load valve mounting system for quick and easy positioning, Variety boxes available in various tailpiece configurations, giving you the specific product your customers need, including water hammer Arrestor SKUs, 11-3/4 in width x 10-1/8 in height faceplate Oatey 38753385334
Package Weight: 1.55, Type: Plain, Series: Quadtro, Suitable For Use With: Washing Machine, Material: Polystyrene, Dimensions: 8-3/4 in W x 7-1/2 in H x 3-5/8 in D 2 in drain opening fits PVC or ABS SCH 40 DWV pipe, Easy to remove knockout, patent pending hammer valves, Snap-on faceplate frame accommodates up to 1 in drywall, Box made of high impact polystyrene, Top or bottom valve mount, 4 support brackets included for mounting, Easy installation lock and load valve mounting system for quick and easy positioning, Variety boxes available in various tailpiece configurations, giving you the specific product your customers need, including water hammer Arrestor SKUs, 11-3/4 in width x 10-1/8 in height faceplate Oatey 38753385501
Package Weight: 4, Type: Flanged, Nominal Size: 3 in, Connection Type: Compression, Drain Material: PVC, Grid Size: 5 in Dia, Finish: Nickel Bronze, Dimensions: 8 in H x 8-1/2 in W Oatey 38753900322
Package Weight: 4, Type: Flanged, Nominal Size: 4 in, Connection Type: Compression, Drain Material: PVC, Grid Size: 5 in Dia, Finish: Nickel Bronze, Dimensions: 8 in H x 8-1/2 in W Oatey 38753900339
Nominal Size: 3 in, Connection Type: Solvent Weld x Hub, Drain Material: PVC Provides a level installation to the finished floor every time, Concrete tight protection, Interchangeable drain and cleanout, Height and pitch adjustments, 6 in round nickel bronze strainer with ring Oatey 38753900445
Nominal Size: 4 in, Connection Type: Solvent Weld x Hub, Drain Material: PVC Provides a level installation to the finished floor every time, Concrete tight protection, Interchangeable drain and cleanout, Height and pitch adjustments, 6 in round nickel bronze strainer with ring Oatey 38753900452
Suitable For Use With: True Set Commercial Drainage Oatey 38753901251
Nominal Size: 2 or 3 in, Connection Type: Solvent Weld, Drain Material: PVC, Finish: Nickel Bronze, Dimensions: 5.5 in W x 5.8 in H Fits over 2 in outside or 3 in inside pipe, Flanged base, Die cast nickel bronze strainer Oatey 38753900315
Type: Commercial Grade Flanged, Cleanout Size: 3 in, 4 in, Cover Material: Brass, Connection Type: Solvent, Material: PVC, Finish: Nickel Bronze Oatey 38753901046
Package Weight: 3.8, Type: On-Grade, Nominal Size: 4 x 3 in, Connection Type: Compression, Drain Material: PVC, Grid Size: 5 in Dia, Finish: Nickel Bronze, Dimensions: 6-1/2 in H Complete drain, complete line, complete solution, Easy leveling drain for a true set every time Oatey 38753902012
Nominal Size: 3 or 4 in, Connection Type: Solvent Weld, Drain Material: PVC, Finish: Brass Plated, Dimensions: 5-1/2 in W x 6-1/2 in H Die cast brass cover, Fits over 3 in outside or 4 in inside pipe, Barrel assembly adjustable up to 1-1/8 in above the poured floor to accommodate any finished floor surface, On-grade base Oatey 38753902838
Type: Commercial On-Grade, Cleanout Size: 3 in, 4 in, Cover Material: Brass, Connection Type: Solvent, Material: PVC, Finish: Nickel Bronze Oatey on-grade clean-out comes ready to install out of the carton, with a strainer protected under a concrete-tight, impact-resistant cover, Barrel assembly adjustable up to 1 to 1/8 in above the poured floor to accommodate any finished floor surface Oatey 38753902852
Type: Commercial Grade Flanged, Cleanout Size: 4 in, Cover Material: Brass, Connection Type: Solvent, Material: PVC, Finish: Nickel Bronze Oatey 38753901053
Nominal Size: 4 in, Connection Type: Solvent Weld, Drain Material: PVC, Finish: Nickel Bronze, Dimensions: 5.5 in W x 6.8 in H Die cast nickel bronze strainer, Easy leveling drain for a True Set every time, Fits over 4 in outside pipe, Complete versatility, Complete confidence/post pour leveling, Complete assembly, Complete safety/load capacity, On-grade base Oatey 38753902517
Type: Medium Duty Round, Cleanout Size: 4 in, Load Rating: 4999 lb, Cover Size: 5 in Dia, Cover Material: Brass, Connection Type: On-Grade, Material: PVC Easy leveling drain for a True Set every time, Ready for use right out of the box comes completely assembled no spare parts, Provides a level installation to the finished floor every time, Concrete tight protection, Largest adjustment range in the industry, Height and pitch adjustments, Barrel assembly adjustable up to 1-1/8 in (recesses 1/2 in) above the poured floor to accommodate any finished floor surface, 4 in outside fit hub connection, Safe live load between 2000 and 4999 lb Oatey 38753902951
Nominal Size: 4 in, Connection Type: Solvent Weld, Drain Material: PVC, Finish: Nickel Bronze, Dimensions: 5.5 in W x 6.8 in H Die cast nickel bronze cover, Fit over 4 in outside pipe, Barrel assembly adjustable up to 1-1/8 in above the poured floor to accommodate any finished floor surface, On-grade base Oatey 38753902975
Specifications: 5 in Socket Weld, Material: PVC Oatey 38753901220
Specifications: 6 in Socket Weld, Material: PVC Oatey 38753901244
Country of Origin: US, Package Length: 11.75, Package Height: 7, Package Width: 10, Package Volume: 0.48, Type: Waterless/In-Line, Drain Outlet Size: 2 in, Height: 1-1/4 in, Diaphragm Type: EPDM, Gasket Type: EPDM Soft Rubber, Housing Material: Plastic, Color: Black, Domestic/Import: Domestic Stops drain odors and bugs, Simple one-piece installation, 4 press fit models fit 2 in, 3 in, 3-1/2 and 4 in drains, Patented air relief valve, Economical, Saves water - eliminates need for trap primer, Standard waterless in-line floor drain trap sea, Easily press fits into a standard drain to seal out odor and bugs, New construction: Used as a trap primer replacement or in conjunction with a trap primer to provide protection against escaping sewer gases, eliminates the need to repair/replace trap primers when they fail, Retrofit: Used in situations where trap primers have failed or where trap primers were never installed Rectorseal 21449970419
Country of Origin: US, Package Length: 11.75, Package Height: 7, Package Width: 10, Package Volume: 0.48, Drain Outlet Size: 3 in, Height: 1-1/4 in, Diaphragm Type: EPDM, Gasket Type: EPDM Soft Rubber, Housing Material: Plastic, Color: Black, Domestic/Import: Domestic Stops drain odors and bugs, Simple one-piece installation, 4 press fit models fit 2 in, 3 in, 3-1/2 and 4 in drains, Patented air relief valve, Economical, Saves water - eliminates need for trap primer Rectorseal 21449970426
Country of Origin: US, Package Length: 11.75, Package Height: 6, Package Width: 8.75, Package Volume: 0.34, Type: Waterless/In-Line, Drain Outlet Size: 3-1/2 in, Height: 1-1/4 in, Diaphragm Type: EPDM, Gasket Type: EPDM Soft Rubber, Housing Material: Plastic, Color: Black, Domestic/Import: Domestic Stops drain odors and bugs, Simple one-piece installation, 4 press fit models fit 2 in, 3 in, 3-1/2 and 4 in drains, Patented air relief valve, Economical, Saves water - eliminates need for trap primer, Standard waterless in-line floor drain trap sea, Easily press fits into a standard drain to seal out odor and bugs, New construction: Used as a trap primer replacement or in conjunction with a trap primer to provide protection against escaping sewer gases, eliminates the need to repair/replace trap primers when they fail, Retrofit: Used in situations where trap primers have failed or where trap primers were never installed Rectorseal 21449970433
Country of Origin: US, Package Length: 11.75, Package Height: 7, Package Width: 10, Package Volume: 0.48, Drain Outlet Size: 4 in, Height: 1-1/4 in, Diaphragm Type: EPDM, Gasket Type: EPDM Soft Rubber, Housing Material: Plastic, Color: Black, Domestic/Import: Domestic Stops drain odors and bugs, Simple one-piece installation, 4 press fit models fit 2 in, 3 in, 3-1/2 and 4 in drains, Patented air relief valve, Economical, Saves water - eliminates need for trap primer Rectorseal 21449970440
Country of Origin: US, Package Length: 12, Package Height: 6, Package Width: 9, Package Weight: 0.25, Package Volume: 0.38, Type: Waterless In-Line, Drain Outlet Size: 2 in, Diaphragm Type: EPDM, Gasket Type: EPDM Soft Rubber, Housing Material: Plastic, Domestic/Import: Domestic SureSeal Plus can be used with 2 in, 3 in, and 4 in floor drains and 3-1/2 in and 4 in floor drain strainers to trap odors, SureSeal Plus can be easily retrofitted to older drains, Stops drain backup, drain odors and bugs, Stops up to 5 ft of head pressure, Simple one-piece installation, 4 press fit models fit all drains, Patented air relief valve, Economical and saves water - eliminates need for trap primer, Model: SS2009PLS Rectorseal 214499704572
Country of Origin: US, Package Length: 17, Package Height: 6, Package Width: 9, Package Weight: 0.35, Package Volume: 0.53, Type: Waterless In-Line, Drain Outlet Size: 3 in, Diaphragm Type: EPDM, Gasket Type: EPDM Soft Rubber, Housing Material: Plastic, Domestic/Import: Domestic Patented air relief valve, Economical and saves water - eliminates need for trap primer, SureSeal Plus can be used with 2 in, 3 in, and 4 in floor drains and 3-1/2 in and 4 in floor drain strainers to trap odors, SureSeal Plus can be easily retrofitted to older drains, Model: SS3009PLS, Stops drain backup, drain odors and bugs, Stops up to 5 ft of head pressure, Simple one-piece installation, 4 press fit models fit all drains Rectorseal 214499704640
Package Length: 7, Package Height: 6, Package Width: 8, Package Volume: 0.17, Suitable For Use With: SCH 40, SDR-35, Foam Core, Specifications: 2 in, Material: PVC Reduces installation cost, Simplifies rough-in, Threaded adapter cements inside the pipe, providing a flush-finished cleanout for DWV systems Rectorseal 21449974813
Package Length: 9, Package Height: 8, Package Width: 11, Package Volume: 0.4, Suitable For Use With: SCH 40, SDR-35, Foam Core Reduces installation cost, Simplifies rough-in, Threaded adapter cements inside the pipe, providing a flush-finished cleanout for DWV systems Rectorseal 21449974837
Package Length: 10, Package Height: 14, Package Width: 10, Package Volume: 0.73, Suitable For Use With: SCH 40, SDR-35, Foam Core, Specifications: 4 in, Material: PVC Reduces installation cost, Simplifies rough-in, Threaded adapter cements inside the pipe, providing a flush-finished cleanout for DWV systems Rectorseal 21449974851
Country of Origin: US, Suitable For Use With: RP293 Toe-Operated Bathtub Drain/RP393 Bath Waste Assembly, Finish: Champagne Bronze, Domestic/Import: Domestic No trip lever DELTA 034449646192
Pack Quantity: 1, Country of Origin: CN, Package Length: 7.95, Package Height: 3.25, Package Width: 7.5, Package Weight: 1.27, Drain Material: Metal, Finish: Venetian Bronze, Domestic/Import: Import DELTA 034449525114
Shower Drain Gasket, 2 in
Locke Part #: G0252 MFG Part #: SD-210
Pack Quantity: 20, Package Weight: 0.19, Dimensions: 1-1/4 in W, Specifications: 2 in, Warranty: Limited Fernco 018578016736
Pack Quantity: 20, Country of Origin: US, Package Weight: 0.13, Mfg Standards/Approvals: ASTM D5926, CSA B602, Dimensions: 2.29 in Dia x 1.25 in L, Domestic/Import: Domestic, Suitable For Use With: 2 in Drain Pipe, Warranty: Limited Fernco 018578016729
Pack Quantity: 3, Country of Origin: US, Package Weight: 14.56, Domestic/Import: Domestic, Includes: (3) Sticks of Grey Channel with Grate, (1) End Cap and (1) End Outlet, Material: Polypropylene, Warranty: Limited Fernco 018578004047
StormDrain End Cap, ABS, Domestic
Locke Part #: G0513 MFG Part #: FSDP-EC
Pack Quantity: 5, Country of Origin: US, Package Weight: 0.11, Dimensions: 4.58 in L x 4.68 in W x 0.14 in Thk, Domestic/Import: Domestic, Material: ABS, Warranty: Limited Fernco 018578004061
StormDrain End Outlet, ABS, Domestic
Locke Part #: G0514 MFG Part #: FSDP-EO
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.3, Dimensions: 4.96 in Dia x 5.28 in L, Domestic/Import: Domestic, Material: ABS, Warranty: Limited Fernco 018578004054
Pack Quantity: 9, Country of Origin: US, Package Weight: 4.77, Dimensions: 39.2 in L, Domestic/Import: Domestic, Finish/Color: Gray, Material: Polypropylene, Type: Single Piece, Warranty: Limited Fernco 018578004030
Mfg Standards/Approvals: ANSI Z21.41/CSA 6.9, BAA/ARRA Certification, NFPA 54, NSF 2, Warranty: 5 Years Limited, Nominal Size: 1/2, Outside Diameter: 1-1/8, Length: 3-3/8, End Style: FNPT 2 piece quick disconnect, Provides efficient, full gas flow, Quick disconnect socket acts as shut-off valve when the plug and socket are disconnected, 0.5 psi maximum pressure, 350 deg F maximum temperature with fusible link thermal shut-off, 1/2 in FNPT freespin inlet and outlet, 99,600 Btu/hr, Brass socket and plug T&S Brass 671262230162
Package Weight: 1.2, Mfg Standards/Approvals: ANSI Z21.41/CSA 6.9, BAA/ARRA Certification, NFPA 54, NSF 2, Warranty: 5 Years Limited, Nominal Size: 3/4, Length: 3-1/2, End Style: FNPT 2 piece quick disconnect, Provides efficient, full gas flow, Quick disconnect socket acts as shut-off valve when the plug and socket are disconnected, 0.5 psi maximum pressure, 350 deg F maximum temperature with fusible link thermal shut-off, 3/4 in FNPT freespin inlet and outlet, 212,000 Btu/hr min (tested at 1000 Btu/hr, SG=0.64, pressure drop=0.3 in water column) flow rate, Brass socket and plug T&S Brass 671262230179
Mfg Standards/Approvals: ANSI Z21.41/CSA 6.9, BAA/ARRA Certification, NFPA 54, NSF 2, Warranty: 5 Years Limited, Nominal Size: 1, Length: 3-1/2, Series: Saf-T-Link, End Style: FNPT 2 piece quick disconnect, Provides efficient, full gas flow, Quick disconnect socket acts as shut-off valve when the plug and socket are disconnected, 0.5 psi maximum pressure, 350 deg F maximum temperature with fusible link thermal shut-off, 3/4 in FNPT freespin inlet and outlet, 212,000 Btu/hr min (tested at 1000 Btu/hr, SG=0.64, pressure drop=0.3 in water column) flow rate, Brass socket and plug T&S Brass 671262230186
Mfg Standards/Approvals: NFPA 54, BAA/ARRA, Warranty: 5 Years Limited, Nominal Size: 3/4, Series: Saf-T-Link, End Style: NPT, Material: Brass & Stainless Steel Pressure: 0.5 psi max (0.03 bar), Temperature: 350 F max w/ Fusible Link Thermal Shut-off(176.67?), Provides a consistent, stress-free, torque-free swivel motion, Eliminated kinking, allowing entire connector length to be used, 3/4" NPT outlet and inlet, Allows for full gas flow, Material: Brass swivel & stainless steel nut T&S Brass 671262230216
Includes: 5 ft Adjustable Restraining Cable, (1) U-bolt, (1) Eye-bolt, (4) Wall anchors w/screws, (2) Flat washers, (2) Hex Nuts, (1) Wall Bracket, (2) End Clips, Warranty: 5 Years Limited, Series: Saf-T-Link, Material: Steel restraining cable Restraining cable kit with mounting hardware, Temperature: 350 F max w/ Fusible Link Thermal Shut-off(176.67?), Restraining cable adjusts out to maximum of 5', (1) U-bolt, (1) Eye-Bolt, (4) Wall anchors w/ screws, (2) Flat washers, (2) Hex nuts, (1) Wall bracket, (2) End clips, Optimum torsional relief improves safety, increases connector life, Material: Steel restraining cable T&S Brass 671262241427
Mfg Standards/Approvals: ASME A112.18.1, CSA B125.1, NSF 61 - Section 9, NSF 372 (Low Lead Content), Includes: Hose Washer, Warranty: 3 Years, Length: 44, Working Pressure: 20 to 125, Temperature Rating: 40 to 140, Type: Flexible, Nominal Size: 3/4-14, End Style: FNPT, Material: Stainless Steel, Finish: Gray 44 in flexible stainless steel hose with head resistant grab handle, Polyurethane inner tubing, Stainless steel hose, brass end fittings, thermoplastic handle material, Polished chrome plated brass end fittings, thermoplastic handle and stainless steel hose T&S Brass 671262000284
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.19, Pipe Size: 3/8 in, Length: 20 in, Finish: Chrome Plated, Domestic/Import: Domestic Sioux Chief Mfg 739236454577
Pack Quantity: 50, Country of Origin: US, Package Weight: 0.3, Pipe Size: 3/8 in, Length: 20 in, Finish: Chrome Plated, Domestic/Import: Domestic Sioux Chief Mfg 739236454591
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.19, Pipe Size: 3/8 in, Length: 20 in, Finish: Chrome Plated, Domestic/Import: Domestic Sioux Chief Mfg 739236454690
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.034, Package Volume: 0.05, Series: 290, Suitable For Use With: In Sink Erator Drain, Domestic/Import: Domestic Not made by original manufacturer, but manufactured to same specifications as original part Sioux Chief Mfg 739236501530
Pack Quantity: 12, Country of Origin: US, Package Weight: 0.181, Package Volume: 0.301, Series: 290, Material: Polypropylene, Dimensions: 7 in L, Domestic/Import: Domestic Not made by original manufacturer, but manufactured to same specifications as original part Sioux Chief Mfg 739236501554
Pack Quantity: 10, Package Weight: 1.332, Package Volume: 0.381, Type: Beveled, Series: 291, Material: Rubber Synthetic blended rubber Sioux Chief Mfg 739236502384
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.021, Package Volume: 0.381, Type: Beveled, Series: 291, Material: Rubber, Domestic/Import: Domestic Synthetic blended rubber Sioux Chief Mfg 739236502377
Tomahawk 291 Flat Bibb Washer Chest, Rubber
Locke Part #: M1651 MFG Part #: 291-30126
Pack Quantity: 10, Package Weight: 0.88, Package Volume: 0.381, Type: Flat, Series: 291, Material: Rubber Synthetic blended rubber Sioux Chief Mfg 739236502247
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.801, Package Volume: 0.381, Type: Flat, Series: 291, Material: Rubber, Domestic/Import: Domestic Synthetic blended rubber Sioux Chief Mfg 739236502230
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.329, Package Volume: 0.806, Series: 801, Suitable For Use With: WeldOne and QuadDrain Series Floor Drain, Material: Polypropylene, Finish/Color: Black, Dimensions: 6-3/4 in Dia x 3/8 in Thk, Domestic/Import: Domestic Sioux Chief Mfg 739236300096
Pack Quantity: 20, Country of Origin: US, Package Weight: 0.493, Package Volume: 0.583, Mfg Standards/Approvals: ASTM D2665, Type: General Purpose, Series: 840, Nominal Size: 2 x 3 in, Connection Type: Solvent Weld, Drain Material: PVC, Dimensions: 4-3/8 in Dia x 1-3/4 in H, Domestic/Import: Domestic Available with brass inserts for machine screws, or pilot holes for standard screws, 19 gauge 430 stainless steel strainer, 300 lb light duty, pedestrian traffic strainer load, 3.25 sq-in strainer free area Sioux Chief Mfg 739236300799
Pack Quantity: 10, Package Weight: 2.397, Package Volume: 1.574, Mfg Standards/Approvals: ASTM D2665, Type: Adjustable, Series: 842, Nominal Size: 3 in, Connection Type: Hub, Drain Material: PVC, Dimensions: 6-1/2 in Dia SCH 40 hub adapter available in ABS or PVC, Acme threads are stronger than pipe threads and prevent cross-threading, Pre-threaded trap primer port for knockout connection, Ductile iron head adapter available, Square ring is great for floor tile, For use in pedestrian traffic areas, 1000 lb light duty, pedestrian traffic strainer load, 11.75 sq-in strainer free area, Nickel-bronze round ring and strainer Sioux Chief Mfg 739236306685
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.067, Package Volume: 0.102, Series: 845, Nominal Size: 2 in, Drain Material: PVC, Color: White, Dimensions: 2-3/8 in Dia x 1 in H, Domestic/Import: Domestic Solvent welds inside pipe, flush to floor, Also great for direct vent furnaces and water heaters, or to cover any open ended pipe, 200 lb foot-traffic strainer load, 1.02 sq-in strainer free area, 2.21 gpm strainer flow capacity Sioux Chief Mfg 739236301307
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.128, Package Volume: 0.234, Series: 845, Nominal Size: 3 in, Drain Material: PVC, Color: White, Dimensions: 3-1/2 in Dia x 1-1/2 in H, Domestic/Import: Domestic Solvent welds inside pipe, flush to floor, Also great for direct vent furnaces and water heaters, or to cover any open ended pipe, 200 lb foot-traffic strainer load, 2.85 sq-in strainer free area, 6.16 gpm strainer flow capacity Sioux Chief Mfg 739236301345
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.343, Package Volume: 0.307, Series: 845, Nominal Size: 4 in, Drain Material: PVC, Color: White, Dimensions: 4-1/2 in Dia x 1-7/8 in H, Domestic/Import: Domestic Solvent welds inside pipe, flush to floor, Also great for direct vent furnaces and water heaters, or to cover any open ended pipe, 200 lb foot-traffic strainer load, 4.89 sq-in strainer free area, 10.58 gpm strainer flow capacity Sioux Chief Mfg 739236301383
Pack Quantity: 10, Country of Origin: US, Package Weight: 4.608, Package Volume: 1.244, Type: Arc, Series: 861, Material: Cast Iron, Dimensions: 8 in H x 12 in W, Domestic/Import: Domestic Available with flange and clamping collar for above-grade applications Sioux Chief Mfg 739236302793
Pack Quantity: 20, Country of Origin: US, Package Weight: 0.451, Package Volume: 0.436, Series: 861, Suitable For Use With: Floor Sink, Material: Aluminum, Domestic/Import: Domestic Acid resistant porcelain enamel coating (ARE), Perfect for high heat discharge applications, Available with flange and clamping collar for above-grade applications, Ring/strainer material: nickel-bronze, porcelain-coated cast iron, Drain body material: porcelain-coated cast iron, Cast aluminum clamping collar, No-hub Sioux Chief Mfg 739236302878
Pack Quantity: 10, Country of Origin: US, Package Weight: 4.159, Package Volume: 0.914, Series: 861, Material: Cast Iron, Dimensions: 8 in H x 12 in W, Domestic/Import: Domestic Available with flange and clamping collar for above-grade applications Sioux Chief Mfg 739236302779
Pack Quantity: 1, Country of Origin: US, Type: Full, Series: 861, Suitable For Use With: 8 in Floor Sink, Finish: Nickel Bronze, Domestic/Import: Domestic Acid-resistant porcelain enamel coating (are) Sioux Chief Mfg 739236314130
Pack Quantity: 1, Package Weight: 4.013, Type: Square, Series: 861, Material: Cast Iron, Dimensions: 8 x 8 in Acid resistant porcelain enamel coating (ARE), Perfect for high heat discharge applications Sioux Chief Mfg 739236309754
Pack Quantity: 1, Country of Origin: US, Package Weight: 5.015, Package Volume: 0.124, Type: Square, Series: 861, Material: Cast Iron, Dimensions: 12 x 12 in, Domestic/Import: Domestic Acid resistant porcelain enamel coating (ARE), Perfect for high heat discharge applications, Available with flange and clamping collar for above-grade applications Sioux Chief Mfg 739236302823
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.065, Package Volume: 0.11, Type: Slotted Countersunk, Series: 878, Suitable For Use With: 842-9 Series Fitting Socket Ring, Material: Polypropylene, Finish/Color: White, Dimensions: 2 in, Domestic/Import: Domestic Combine with FIP adapters to make your own cleanouts, 842-9 series fitting socket ring for an inexpensive threaded access hole cover, Threaded brass insert Sioux Chief Mfg 739236304544
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.114, Package Volume: 0.251, Type: Slotted Countersunk, Series: 878, Suitable For Use With: 842-9 Series Fitting Socket Ring, Material: Polypropylene, Finish/Color: White, Dimensions: 3 in, Domestic/Import: Domestic Combine with FIP adapters to make your own cleanouts, 842-9 series fitting socket ring for an inexpensive threaded access hole cover, Threaded brass insert Sioux Chief Mfg 739236304568
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.171, Package Volume: 0.381, Type: Slotted Countersunk, Series: 878, Suitable For Use With: 842-9 Series Fitting Socket Ring, Material: Polypropylene, Finish/Color: White, Dimensions: 4 in, Domestic/Import: Domestic Combine with FIP adapters to make your own cleanouts, 842-9 series fitting socket ring for an inexpensive threaded access hole cover, Threaded brass insert Sioux Chief Mfg 739236304582
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.14, Package Volume: 0.3, Type: Slotted Countersunk, Series: 878, Suitable For Use With: 842-9 Series Fitting Socket Ring, Material: Polypropylene, Finish/Color: White, Dimensions: 3-1/2 in, Domestic/Import: Domestic Combine with FIP adapters to make your own cleanouts, 842-9 series fitting socket ring for an inexpensive threaded access hole cover, Threaded brass insert Sioux Chief Mfg 739236304575
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.086, Package Volume: 0.165, Type: Slotted Countersunk, Series: 878, Suitable For Use With: 842-9 Series Fitting Socket Ring, Material: Polypropylene, Finish/Color: White, Dimensions: 2-1/2 in, Domestic/Import: Domestic Combine with FIP adapters to make your own cleanouts, 842-9 series fitting socket ring for an inexpensive threaded access hole cover, Threaded brass insert Sioux Chief Mfg 739236304551
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.047, Package Volume: 0.11, Type: Slotted Countersunk, Series: 878, Material: Polypropylene, Finish/Color: White, Dimensions: 1-1/2 in, Domestic/Import: Domestic Combine with FIP adapters to make your own cleanouts, Threaded brass insert Sioux Chief Mfg 739236304537
Pack Quantity: 8, Country of Origin: US, Package Weight: 0.41, Package Volume: 0.381, Type: Slotted Countersunk, Series: 878, Material: Polypropylene, Finish/Color: White, Dimensions: 6 in, Domestic/Import: Domestic Combine with FIP adapters to make your own cleanouts, Threaded brass insert Sioux Chief Mfg 739236304605
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.003, Series: 991, Nominal Size: 1-1/2 in, Domestic/Import: Domestic Sioux Chief Mfg 739236509383
Pack Quantity: 500, Country of Origin: US, Package Weight: 0.01, Package Volume: 0.562, Type: Reducing, Series: 290, Size: 1-1/2 x 1-1/4 in, Domestic/Import: Domestic Beveled design provides a better seal when used, Perfect washer for basket strainer installations Sioux Chief Mfg 739236501639
Pack Quantity: 300, Country of Origin: US, Package Weight: 0.007, Package Volume: 0.165, Series: 290, Size: 1-1/2 in, Color: Black, Domestic/Import: Domestic Beveled design provides a better seal when used, Perfect washer for basket strainer installations Sioux Chief Mfg 739236509581
Pack Quantity: 300, Package Weight: 0.007, Package Volume: 0.165, Series: 290, Size: 1-1/4 in, Color: White Beveled design provides a better seal when used, Perfect washer for basket strainer installations Sioux Chief Mfg 739236501585
Pack Quantity: 300, Country of Origin: US, Package Weight: 0.007, Package Volume: 0.165, Series: 290, Size: 1-1/2 in, Domestic/Import: Domestic Beveled design provides a better seal when used, Perfect washer for basket strainer installations Sioux Chief Mfg 739236501684
Pack Quantity: 1, Package Weight: 4.435, Package Volume: 0.399, Mfg Standards/Approvals: ASME A112.6.3-2001, Type: Adjustable, Series: 832, Nominal Size: 2 in, Connection Type: Hub, Drain Material: PVC, Dimensions: 6-1/2 in Dia Adjustable after the pour, ABS/PVC base adapter, ABS coring sleeve, head adapter and poly coring plug, For use in pedestrian traffic areas, 1000 lb light duty, heel-proof strainer load, 13.4 sq-in strainer free area, Nickel-bronze round ring and strainer Sioux Chief Mfg 739236376510
Pack Quantity: 1, Package Weight: 3.5, Package Volume: 0.399, Mfg Standards/Approvals: ASME A112.6.3-2001, Type: Adjustable, Series: 832, Nominal Size: 3 in, Connection Type: Hub, Drain Material: PVC, Dimensions: 6-1/2 in Dia Adjustable after the pour, ABS/PVC base adapter, ABS coring sleeve, head adapter and poly coring plug, For use in pedestrian traffic areas, 1000 lb light duty, heel-proof strainer load, 13.4 sq-in strainer free area, Nickel-bronze round ring and strainer Sioux Chief Mfg 739236374462
Pack Quantity: 1, Package Weight: 4.415, Package Volume: 0.399, Mfg Standards/Approvals: ASME A112.36.2M-2002, Type: Adjustable, Series: 834, Cleanout Size: 3 in, Load Rating: 4000 lb, Cover Size: 6-1/2 in Dia, Cover Material: Nickel Bronze, Material: PVC Adjustable after the pour, ABS/PVC base adapter with polypro cleanout plug, ABS coring sleeve and head adapter, For use in pedestrian traffic areas, Round nickel bronze cover Sioux Chief Mfg 739236374196
Pack Quantity: 1, Package Weight: 4.65, Package Volume: 0.399, Mfg Standards/Approvals: ASME A112.36.2M-2002, Type: Adjustable, Series: 834, Cleanout Size: 4 in, Load Rating: 4000 lb, Cover Size: 6-1/2 in Dia, Cover Material: Nickel Bronze, Material: PVC Adjustable after the pour, ABS/PVC base adapter with polypro cleanout plug, ABS coring sleeve and head adapter, For use in pedestrian traffic areas, Round nickel bronze cover Sioux Chief Mfg 739236365187
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.338, Package Volume: 0.381, Mfg Standards/Approvals: ASSE 1044, IAPMO Listed, UPC Certified, Type: Trap Primer, Series: 213, Pipe Size: 1-1/4 in, Length: 6 in, Gauge: 20 ga, Connection: Fine Thread, Material: Brass, Domestic/Import: Domestic Eliminates extension tailpiece, Branch is higher than standard tailpieces keeps drain line high and out-of sight, Improves looks and adds storage space, 3/4 in MIP branch connection Sioux Chief Mfg 739236500670
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.249, Package Volume: 0.582, Series: 696, Material: ABS, Finish: Painted, Domestic/Import: Domestic Frame textured and paintable ABS, Frame single frame for ice maker application, Frame double frame for washing machine application easily split for separated box installation Sioux Chief Mfg 739236109583
Pack Quantity: 10, Package Weight: 1.2, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, ASSE 1010, CSA B125.1-05, Series: 696, Size: 1/2 in Female C, Material: ABS, Dimensions: 1.616 in H x 1.658 in W Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Durable ABS stands up to jobsite abuse, Box mounts easily to stud for top or bottom supply, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 1/4 in OD compression outlet connection, The debris cover protects valves from drywall mud and paint during construction, 250 deg F max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, No-lead, dezincification-resistant 693, Rough-in pack (supply box, bracket, debris cover) Sioux Chief Mfg 739236100016
Pack Quantity: 10, Package Weight: 1.167, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, ASSE 1010, CSA B125.1-05, Series: 696, Size: 1/2 in PEX F1807 Crimp, Material: ABS, Dimensions: 1.616 in H x 1.658 in W Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Durable ABS stands up to jobsite abuse, Box mounts easily to stud for top or bottom supply, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 1/4 in OD compression outlet connection, The debris cover protects valves from drywall mud and paint during construction, 250 deg F max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, No-lead, dezincification-resistant 693, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100030
Pack Quantity: 10, Package Weight: 1.3, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, ASSE 1010, CSA B125.1-05, Series: 696, Size: 1/2 in PEX F1960 Grip, Material: ABS, Dimensions: 1.616 in H x 1.658 in W Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Durable ABS stands up to jobsite abuse, Box mounts easily to stud for top or bottom supply, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 1/4 in OD compression outlet connection, The debris cover protects valves from drywall mud and paint during construction, 250 deg F max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, No-lead, dezincification-resistant 693, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100023
Pack Quantity: 10, Package Weight: 1.392, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, ASSE 1010 Listed, IPC Certified, IAPMO Listed, UPC Certified, Series: 696, Size: 1/2 in PEX F1960 Grip, Material: ABS, Dimensions: 7-1/4 in H x 5-3/4 in W Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Durable ABS stands up to jobsite abuse, Box mounts easily to stud for top or bottom supply, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 1/4 in OD compression outlet connection, The debris cover protects valves from drywall mud and paint during construction, Standard pack (supply box, frame, bracket, debris cover), 250 deg F max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, ABS frame, galvanized steel bracket, stainless steel arrester body, piston made of polypropylene with two EPDM o-rings, piston lubrication made of dow-corning, 111 FDA approved silicone compound, chrome-plated forged brass valve body Sioux Chief Mfg 739236100115
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.821, Package Volume: 1.69, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, IAPMO Listed, UPC Certified, Series: 696, Inlet Size: 1/2 in, Outlet Size: 3/8 in, Inlet Type: PEX F1807 Crimp, Outlet Type: Compression, Pressure Rating: 250 psi, Temperature Rating: 250 deg F, Material: ABS, Dimensions: 7-1/4 in H x 5-3/4 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, ABS boxes mount securely to stud or over studs, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valves with 3/8 in OD compression outlet connections Sioux Chief Mfg 739236100207
Pack Quantity: 10, Package Weight: 1.823, Package Volume: 1.69, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, IAPMO Listed, UPC Certified, Series: 696, Inlet Size: 1/2 in, Outlet Size: 3/8 in, Inlet Type: PEX F1960 Grip, Outlet Type: Compression, Pressure Rating: 250 psi, Temperature Rating: 250 deg F, Material: ABS, Dimensions: 7-1/4 in H x 5-3/4 in W Patent No 7,360,553 and no 7,735,511, ABS boxes mount securely to stud or over studs, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valves with 3/8 in OD compression outlet connections Sioux Chief Mfg 739236100191
Pack Quantity: 10, Country of Origin: US, Package Weight: 2.414, Package Volume: 2.659, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, IAPMO Listed, UPC Certified, Series: 696, Size: 1/2 in Female C, Suitable For Use With: Washing Machine, Material: ABS, Dimensions: 7-1/4 in H x 11-1/2 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Separates supply and drainage systems into two stud bays, Separate boxes offer flexible layout, Durable ABS stands up to jobsite abuse, Drain knockout is easy to remove with pliers, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 3/4 in male hose thread outlet connections, No arrester, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100276
Pack Quantity: 10, Country of Origin: US, Package Weight: 2.408, Package Volume: 2.659, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, IAPMO Listed, UPC Certified, Series: 696, Size: 1/2 in PEX F1807 Crimp, Suitable For Use With: Washing Machine, Material: ABS, Dimensions: 7-1/4 in H x 11-1/2 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Separates supply and drainage systems into two stud bays, Separate boxes offer flexible layout, Durable ABS stands up to jobsite abuse, Drain knockout is easy to remove with pliers, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 3/4 in male hose thread outlet connections, No arrester, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100306
Pack Quantity: 10, Country of Origin: US, Package Weight: 2.5, Package Volume: 2.659, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, IAPMO Listed, UPC Certified, Series: 696, Size: 1/2 in PEX F1960 Grip, Suitable For Use With: Washing Machine, Material: ABS, Dimensions: 7-1/4 in H x 11-1/2 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Separates supply and drainage systems into two stud bays, Separate boxes offer flexible layout, Durable ABS stands up to jobsite abuse, Drain knockout is easy to remove with pliers, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 3/4 in male hose thread outlet connections, No arrester, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100290
Pack Quantity: 10, Country of Origin: US, Package Weight: 2.59, Package Volume: 2.659, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, IAPMO Listed, UPC Certified, Series: 696, Size: 1/2 in PEX F1807 Crimp, Suitable For Use With: Washing Machine, Material: ABS, Dimensions: 7-1/4 in H x 11-1/2 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Separates supply and drainage systems into two stud bays, Separate boxes offer flexible layout, Durable ABS stands up to jobsite abuse, Drain knockout is easy to remove with pliers, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 3/4 in male hose thread outlet connections, Standard pack (supply box, frame, bracket, debris cover), 250 deg F max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure Sioux Chief Mfg 739236109569
Pack Quantity: 10, Country of Origin: US, Package Weight: 2.8, Package Volume: 2.659, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, IAPMO Listed, UPC Certified, Series: 696, Size: 1/2 in PEX F1960 Grip, Suitable For Use With: Washing Machine, Material: ABS, Dimensions: 7-1/4 in H x 11-1/2 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, Boxes mount securely to stud or over studs, Separates supply and drainage systems into two stud bays, Separate boxes offer flexible layout, Durable ABS stands up to jobsite abuse, Drain knockout is easy to remove with pliers, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valve, 3/4 in male hose thread outlet connections, Standard pack (supply box, frame, bracket, debris cover), 250 deg F max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure Sioux Chief Mfg 739236100368
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.141, Package Volume: 0.381, Series: 696, Material: ABS, Finish: Painted, Domestic/Import: Domestic Frame textured and paintable ABS, Frame single frame for ice maker application, Frame double frame for washing machine application easily split for separated box installation Sioux Chief Mfg 739236109323
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.296, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, UPC/IAPMO Listed, Series: 696, Specifications: 1/2 in PEX F1807 Crimp, Material: ABS, Dimensions: 7-1/4 in H x 5-3/4 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, ABS boxes mount securely to stud or over studs, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valves with 3/8 in OD compression outlet connections, 250 deg F Max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, No-lead valves, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100078
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.426, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, UPC/IAPMO Listed, Series: 696, Specifications: 1/2 in PEX F1807 Crimp, Material: ABS, Dimensions: 7-1/4 in H x 5-3/4 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, ABS boxes mount securely to stud or over studs, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valves with 3/8 in OD compression outlet connections, 250 deg F Max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, No-lead valves, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100160
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.294, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, UPC/IAPMO Listed, Series: 696, Specifications: 1/2 in PEX F1960 Grip, Material: ABS, Dimensions: 7-1/4 in H x 5-3/4 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, ABS boxes mount securely to stud or over studs, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valves with 3/8 in OD compression outlet connections, 250 deg F Max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, No-lead valves, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100061
Pack Quantity: 10, Country of Origin: US, Package Weight: 1.501, Package Volume: 1.695, Mfg Standards/Approvals: ASME A112.18.1, IPC Certified, NSF-61, UPC/IAPMO Listed, Series: 696, Specifications: 1/2 in PEX F1960 Grip, Material: ABS, Dimensions: 7-1/4 in H x 5-3/4 in W, Domestic/Import: Domestic Patent No 7,360,553 and no 7,735,511, ABS boxes mount securely to stud or over studs, Allows for straight and secure supply stops recessed into the wall, Eliminates backbreaking labor of cleaning stub outs and installing supply stops, Debris covers included to protect boxes from drywall mud and paint, High quality quarter-turn ball valves with 3/8 in OD compression outlet connections, 250 deg F Max working temperature, 100 psi max testing air pressure, 250 psi max working/testing water pressure, No-lead valves, Standard pack (supply box, frame, bracket, debris cover) Sioux Chief Mfg 739236100153
Size: 1/2 in, Suitable For Use With: Ice Maker, Specifications: 1/4 in Compression, Material: ABS, Dimensions: 5-3/4 in W x 3-1/2 in D x 7-1/4 in H Boxes mount securely to stud or over studs, Durable ABS stands up to job site abuse, With MiniRester water hammer arrester, Box mounts easily to stud for top or bottom supply, Debris covers included to protect boxes from drywall mud and paint, High-quality quarter-turn ball valve, 1/4 in OD compression outlet connection, The debris cover protects valves from drywall mud and paint during construction Sioux Chief Mfg 739236100122
Pack Quantity: 250, Country of Origin: US, Package Weight: 0.042, Package Volume: 0.806, Series: 42 Series, Thread Type: ACME, Thread Size: 2-1/2 in, Thread Length: 1-15/16 to 2-15/16 in, Overall Length: 2-1/2 to 3-1/2 in, Material: Brass, Domestic/Import: Domestic Tensile strength exceeds 1,100 lb per bolt, Acme thread design provides increased strength and smoother, faster threading, 100% corrosion proof nylon bolts are available in convenient 2-1/2 in and 3-1/2 in length, Improved adaptability - open end nut now fits 1/2 in sockets and fits under most bolt caps, Bolt base loads into any flange, 40% glass-filled nylon bolt, 40% glass-filled nylon nut Sioux Chief Mfg 739236505262
Pack Quantity: 50, Country of Origin: US, Package Weight: 0.05, Package Volume: 0.165, Series: 42 Series, Thread Type: ACME, Thread Size: 3-1/2 in, Thread Length: 1-15/16 to 2-15/16 in, Overall Length: 2-1/2 to 3-1/2 in, Material: Brass, Domestic/Import: Domestic Tensile strength exceeds 1,100 lb per bolt, Acme thread design provides increased strength and smoother, faster threading, 100% corrosion proof nylon bolts are available in convenient 2-1/2 in and 3-1/2 in length, Improved adaptability - open end nut now fits 1/2 in sockets and fits under most bolt caps, Unique design allows for quick and hassle free installation, Pyramid base design keeps bolt upright and does not allow bolt to spin in flange, eliminating need to double nut bolt, Bolt base loads into any flange, 40% glass-filled nylon bolt, 40% glass-filled nylon nut Sioux Chief Mfg 739236510136
Pack Quantity: 16, Country of Origin: US, Package Weight: 0.463, Package Volume: 0.381, Series: 695-D, Connection: 1/2 in FNPT Swivel, Material: Copper, Dimensions: 7-3/8 in H, Domestic/Import: Domestic Available with two, three or four flexible copper branches, Evenly distributes water to each branch every time, Brass, copper and no-lead solder wye splitter body, brass wye splitter branches, brass, copper and no-lead distributor body, copper distributor branches and ABS distributor branch plug, 1/4 in male sweat x spin-closed branch, 1/2 in FIP captured nut Sioux Chief Mfg 739236109040
Pack Quantity: 6, Country of Origin: US, Package Weight: 3.452, Package Volume: 0.913, Mfg Standards/Approvals: ASME A112.6.3-2001, ASTM D2665/D2661, Series: 841, Nominal Size: 2 x 3 in, Connection Type: Hub, Drain Material: PVC, Grid Size: 6-1/2 in, Dimensions: 3-1/2 in H, Domestic/Import: Domestic Low profile design, Standard hub, or full slip connection available to fit 2 and 3 in sch 40 pipe, Full slip connection allow adjust to grade installation, full slip model are gray PVC, Nickel-bronze round ring/strainer, 1000 lb strainer load rating for nickel-bronze (light duty heel-proof), 13.4 sq in round strainer free areas Sioux Chief Mfg 739236351388
Package Weight: 1.31, Mfg Standards/Approvals: ASTM D2665, Nominal Size: 2 in, Connection Type: Hub, Drain Material: PVC/ABS, Grid Size: 6-1/2 in, Color: White, Dimensions: 3-1/2 in H Low profile design, Standard hub or full-slip connections available to fit 2 and 3 in SCH 40 pipe, Full-slip connections allow adjust-to-grade installations, Full-slip models are gray PVC, Nickel bronze and stainless steel strainers for use in pedestrian traffic areas, Ductile iron strainers for heavy duty applications, Square strainers are great for floor tile, PVC solvent weld outlet, 350 lb light duty heel proof load, 13.4 sq-in free area, SCH 40 hub connection Sioux Chief Mfg 739236300188
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.02, Package Volume: 0.096, Type: Raised Head, Series: 882, Pipe Size: 1-1/2 in, Dimensions: 1.78 in OD, Domestic/Import: Domestic Easy to install and remove, Tighten with a crescent wrench, No metal parts to rust Sioux Chief Mfg 739236357526
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.079, Package Volume: 0.064, Type: Raised Head, Series: 882, Pipe Size: 2 in, Dimensions: 2-1/4 in OD, Domestic/Import: Domestic Easy to install and remove, Tighten with a crescent wrench, No metal parts to rust Sioux Chief Mfg 739236357519
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.358, Package Volume: 2.519, Type: Raised Head, Series: 882, Pipe Size: 3 in, Dimensions: 3.378 in OD, Domestic/Import: Domestic Easy to install and remove, Tighten with a crescent wrench, No metal parts to rust Sioux Chief Mfg 739236357502
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.429, Package Volume: 2.519, Type: Raised Head, Series: 882, Pipe Size: 3-1/2 in, Dimensions: 3.85 in OD, Domestic/Import: Domestic Easy to install and remove, Tighten with a crescent wrench, No metal parts to rust Sioux Chief Mfg 739236357496
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.539, Package Volume: 2.519, Type: Raised Head, Series: 882, Pipe Size: 4 in, Dimensions: 4.366 in OD, Domestic/Import: Domestic Easy to install and remove, Tighten with a crescent wrench, No metal parts to rust Sioux Chief Mfg 739236357489
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.48, Package Volume: 0.806, Mfg Standards/Approvals: ASSE 1044, IAPMO Listed, UPC Certified, Type: Trap Primer, Series: 200, Pipe Size: 1-1/2 in, Length: 8 in, Connection: Direct, Material: Brass, Finish: Chrome Plated, Domestic/Import: Domestic Gravity feed, no mechanical parts, Replenishes water in floor drain traps to prevent the escape of sewer gases, 1/2 in nominal branch connection, Eco-friendly means of trap priming Sioux Chief Mfg 739236105011
Pack Quantity: 25, Country of Origin: US, Package Weight: 0.348, Package Volume: 0.562, Mfg Standards/Approvals: ASSE 1044, IAPMO Listed, UPC Certified, Type: Trap Primer, Series: 213, Pipe Size: 1-1/4 in, Length: 6 in, Connection: Fine Thread, Material: Brass, Finish: Chrome Plated, Domestic/Import: Domestic Gravity feed, no mechanical parts, Replenishes water in floor drain traps to prevent the escape of sewer gases, Eco-friendly means of trap priming, 1/2 in nominal branch connection Sioux Chief Mfg 739236105035
Pack Quantity: 12, Country of Origin: US, Package Weight: 2.711, Package Volume: 3.883, Mfg Standards/Approvals: ASTM D2665, Type: Integral Trap, Series: 800, Nominal Size: 2 in, Connection Type: Solvent Weld, Drain Material: PVC, Color: Gray, Dimensions: 6-1/2 in Dia x 11-1/2 in H x 12 in W, Domestic/Import: Domestic Proven performance, improved design, Drain body is sonic welded - not glued, Deeper outlet reduces slab cracks, Threaded, 1/2 in FIP knockout trap primer port, Outlet provides proper slope to connecting pipe, Gray polypro strainer, PVC or ABS solvent weld connection, 350 lb light duty, heel-proof strainer load, 14.25 sq-in strainer free area, SCH 40 hub Sioux Chief Mfg 739236300089
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.2, Mfg Standards/Approvals: ANSI 14/61, ASTM F877/F1960, CAN/CSA B137.5/B125, NSF 14/61, Type: Compression, Nominal Size: 1/2 in, End Style: PEX x NPT, Pressure Rating: 125 psi, Body Material: Brass, Temperature Rating: 140 deg F, Domestic/Import: Domestic The compression straight stop valve enables a direct connection and the compression angle stop valve enables a 90 deg turn, 2.65 in L handle Uponor 673372232289
Pack Quantity: 10, Country of Origin: US, Package Weight: 0.16, Mfg Standards/Approvals: ANSI 14/61 Annex G, ASME A112.18.1, ASTM F877/F1960, CSA B137.5/B125, NSF 14/61, U.P. Code, Type: Full Port, Nominal Size: 1/2 in, End Style: PEX, Pressure Rating: 125 psi, Body Material: Brass, Temperature Rating: 140 deg F, Dimensions: 2.02 in L x 1.32 in D, Domestic/Import: Domestic Made for point-of-use shut-off at the fixture Uponor 673372232609
Pack Quantity: 12, Package Weight: 1.95, Mfg Standards/Approvals: ASME A112.18.1, ASTM F1960, CSA B125-1, Suitable For Use With: Dual Drain Washing Machine, Material: Polystyrene, Dimensions: 9 in H ProPEX tool is required, ProPEX rings sold separately, High impact polystyrene, Lead free, Per NSF Annex G, lead free products contain not more than 0.25% weighted average lead content on wetted surfaces Uponor 673372232562
Mfg Standards/Approvals: ASTM F1960, ASME A112.18.1, ANSI/NSF 14/61, CSA B125-1, Size: 5.9 in L x 4.0 in W x 8.5 in H, Material: Polystyrene PEX Valve Uponor
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.031, Mfg Standards/Approvals: NSF 61, UL Listed, Series: PureFlow, Nominal Size: 1/4 in, End Style: CTS, Material: PEX, Domestic/Import: Domestic, Dimensions: 3/8 in OD, Fitting/Connector Type: Riser No glue, solder torches or lubricants needed, Can be installed in nearly any climate, Allows immediate testing without waiting for glue to dry, fittings to cool or plastic rings to contract, No assembly required, Suitable for new or retrofit applications in residential or light commercial projects, Resistant to corrosion and dezincification, 1/4 in CTS stop valve connections Viega 691514571126
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.05, Mfg Standards/Approvals: NSF 61, UL Listed, Series: PureFlow, Nominal Size: 1/4 in, End Style: CTS, Material: PEX, Domestic/Import: Domestic, Fitting/Connector Type: Riser, Dimensions: 3/8 in OD No glue, solder torches or lubricants needed, Can be installed in nearly any climate, Allows immediate testing without waiting for glue to dry, fittings to cool or plastic rings to contract, No assembly required, Suitable for new or retrofit applications in residential or light commercial projects, Resistant to corrosion and dezincification, 1/4 in CTS stop valve connections Viega 691514571201
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.046, Mfg Standards/Approvals: NSF 61, UL Listed, Series: PureFlow, Nominal Size: 1/4 in, End Style: CTS, Material: PEX, Domestic/Import: Domestic, Dimensions: 3/8 in OD, Fitting/Connector Type: Riser No glue, solder torches or lubricants needed, Can be installed in nearly any climate, Allows immediate testing without waiting for glue to dry, fittings to cool or plastic rings to contract, No assembly required, Suitable for new or retrofit applications in residential or light commercial projects, Resistant to corrosion and dezincification, 1/4 in CTS stop valve connections Viega 691514581200
Pack Quantity: 100, Country of Origin: US, Package Weight: 0.068, Mfg Standards/Approvals: NSF 61, UL Listed, Series: PureFlow, Nominal Size: 1/4 in, End Style: CTS, Material: PEX, Domestic/Import: Domestic, Fitting/Connector Type: Riser, Dimensions: 3/8 in OD No glue, solder torches or lubricants needed, Can be installed in nearly any climate, Allows immediate testing without waiting for glue to dry, fittings to cool or plastic rings to contract, No assembly required, Suitable for new or retrofit applications in residential or light commercial projects, Resistant to corrosion and dezincification, 1/4 in CTS stop valve connections Viega 691514581309
Wax-Free Toilet Seal, PVC, Domestic
Locke Part #: C0304 MFG Part #: FTS-3
Pack Quantity: 20, Country of Origin: US, Package Weight: 0.55, Mfg Standards/Approvals: ASTM A1045, UPC Certified, Dimensions: 2.38 in Dia x 3.25 in L, Domestic/Import: Domestic, Material: PVC, Type: Wax-Free, Warranty: Limited Fernco 018578006072
Wax-Free Toilet Seal, PVC, Domestic
Locke Part #: C0305 MFG Part #: FTS-4
Pack Quantity: 20, Country of Origin: US, Package Weight: 0.475, Mfg Standards/Approvals: ASTM A1045, UPC Certified, Dimensions: 3.37 in Dia x 3.25 in L, Domestic/Import: Domestic, Material: PVC, Type: Wax-Free, Warranty: Limited Fernco 018578006164
Pack Quantity: 24, Country of Origin: US, Package Weight: 0.119, Mfg Standards/Approvals: UPC Certified, Dimensions: 3-1/4 in Dia, Domestic/Import: Domestic, Material: PVC, Suitable For Use With: 2 in Drain Pipe, Type: Wax-Free, Warranty: Limited Fernco 018578014985