|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
1-1/4" cable. 15 Ft. standard all purpose cable with 3/9" pitch. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
1-1/4" cable. 15 Ft. standard all purpose, cable with 1/2" pitch. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Used in drain lines 1-1/4" - 2". Drop head leads into down drain pipes, especially good for back-to-back mounted fixtures & severe bends. Resists kinking. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Used in drain lines 1-1/4" - 2-1/2" such as kitchen sinks, lavatory sinks, slop sinks, & disposal waste lines. Flexible, yet tough, 3/8, " cable most commonly used after traps have been removed. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Used in drain lines 1-1/4" - 2-1/2" such as kitchen sinks, lavatory sinks, slop sinks, & disposal waste lines. Flexible, yet tough, 3/8, " cable most commonly used after traps have been removed. |
RIDGID |
|
|
|
|
Used for 2" & 3" floor drains. Tight wind cable providing good rigidity in a hollow core cable. Not for tree roots. |
RIDGID |
|
|
|
|
Cleans 1-1/2" through 2" lines after P-traps have been removed. |
RIDGID |
|
|
|
|
New Features:, New Torque Limiter - Causes the drum to stop spinning when the blade becomes lodged in a blockage. Warns the operator when blockages are encountered., Contemporary Style Drum Design - Rugged, corrosion resistant, polyethylene drum is rust/dent proof & features larger access holes to drum interior. Positioned 90 to the floor for better cable control., New "Solid Core" Cable - Uses tough 3/8" or 1/2" Integral Wound (IW) solid core cable that is rugged & kink resistant. Each size comes in 50 or 75 lengths & utilizes a variety of the Ridgid quick connect cutter., Drum capacity is 100 of 3/8" or 75 of 1/2". 3/8" cable best for 1-1/2" to 3" lines up to 100 . 1/2" cable best for 2" to 4" lines up to 75 ., 3 HP motor spins cable at 190RPM, CSA approved., Approved to UL Standards (NRTLC). |
RIDGID |
|
|
|
|
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. |
RIDGID |
|
|
|
|
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. |
RIDGID |
|
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. |
RIDGID |
|
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
RIDGID |
|
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Most effective tool for sawing through heavy root stoppages. Used with all machines spinning 1-1/4 cable. Unique design permits backing out of badly damaged pipe without danger of locking. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. |
RIDGID |
|
|
|
|
Used for easy cleaning of lines with a number of elbows. 1-1/8" diameter. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
For cleaning back-to-back fixtures. Drop head leads into down drain pipe. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Designed to retrieve all cables with 3/4" pitch. |
RIDGID |
|
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
RIDGID |
|
|
|
|
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. |
RIDGID |
|
|
|
|
Adapts to 3/4" MPT, 2" gauge. |
BETTER ENTERPRISE CO LTD |
|
|
|
|
Adapts to 3/4" MPT, 2" gauge. |
BETTER ENTERPRISE CO LTD |
|
|
|
|
Used for testing gas leaks, can be used instead of a manometer. Complies with Section 319.0 of Uniform Plumbing Code. All parts are precision made & assembled with sealant. 3/4" FTP,2" Gauge. Assembled in USA. |
PASCO SPECIALTY & MFG INC |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Drop head dies. Head locks in or releases by pull of ratchet knob. Separate sets of alloy steel chaser dies, quickly removed or reversed for close-to-wall threads. Ratchet and handle complete. |
RIDGID |
|
|
|
|
|
Jones Stephen Cor |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
|
|
SEARGANT |
|
|
|
|
|
FLAIR-IT SALES |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Allows You To Meet Requirements Of D.O.T. 192.283, Economical:, Far less expensive than Electric tools. Affordable!, Quick Line Repairs:, Allows fast, convenient, quality fusion., Portable:, Weighs only 3-1/2 lbs. reinforced coating., Durable No Stick Coating:, Stainless Steel., Interchangeable stub & socket:, One tool capable of fusing sizes 3/4", 1", 1-1/4" & 2"., Easy To Read Thermometer:, Large dial recessed in handle., Also: 1/2, "-4" combination STUB OR SOCKET tool also available. |
GEORG FISCHER CENTRAL PLASTICS |
|
|
|
|
Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! |
IPS Corporation |
|
|
|
|
Composite handles make this tool lighter and easier to use!, Combo feature saves money and space!, Works with 1/2 and 3/4 copper crimp rings. |
SEARGANT |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
Size: Single 1/2, Weight: 0.40 lbs, Quantity: 6, Interleaved: 10021449972502, Dimensions (in): 1 x 1 x 4, Cubic Feet: 0.16 |
The world s only self-locking, reversible, internal wrench, Can remove the most stubborn nipples, Works on Corroded Pipe, No thread damage, Self-Locking and Reversible, For use with Schedule 40 Pipe, Made of Heat Tempered Steel, Fits Standard 3/8 and 1/2 Ratchets, Patent # 6,675,679B2. |
WILDE TOOL CO INC |
085432020772 |
|
|
|
|
FLAIR-IT SALES |
|
|
|
|
|
SEARGANT |
|
|
|
|
The flair-it pro installation tool is used to install flair-it pro rings within seconds. This tool is compact and easy to use in tight spaces. There is no other system as fast and easy as the flair-it pro system. |
FLAIR-IT SALES |
|
|
|
|
|
RIDGID |
|
|
|
|
Combination test plug and stub-out for drop eared ell, No thread seal required, Reusable - long lasting, No tools required - manual installation allows for no time wasted applying and removing thread tape after each use! Cost-effective, too!, Smooth at thread end for easy plastering, Time and labor savings |
Jones Stephen Cor |
|
|
|
|
|
RIDGID |
|
|
|
|
|
Jones Stephen Cor |
|
|
|
Weight: 23-1/10 Lb., Capacity: 1/2" to 2" Commercially-Available Schedule 5-40 Black Iron Pipe |
|
RIDGID |
|
|
|
Weight: 48-1/2 Lb., Capacity: 1/2" to 2" Commercially-Available Schedule 5-40 Black Iron Pipe |
|
RIDGID |
|
|
|
|
Quality, oil tempered, flat spring steel wire tape for cleaning all sizes of sewers & drains. Automatic grip handle helps force tapes back & forth easily. Tapes furnished with spear point on one end & roller ball point on the other. |
RIDGID |
|
|
|
|
|
PASCO SPECIALTY & MFG INC |
|
|
|
|
High tensile spring wire. Pistol grip handle, steel drum for fast clearing of clogged drains and waste lines. Spin action permits passage of wire through traps and around bends with ease. |
GENERAL WIRE SPRING |
|
|
|
|
Models 22 & 25 Bench Yoke Vises. Yoke & base are made of dependable, strong iron. Hardened alloy steel jaws & convenient pipe rest & bender. |
REED MFG. COMPANY |
|
|
|
|
Models 22 & 25 Bench Yoke Vises. Yoke & base are made of dependable, strong iron. Hardened alloy steel jaws & convenient pipe rest & bender. |
REED MFG. COMPANY |
|
|
|
|
|
Jones Stephen Cor |
|
|
|
Size: 1- 1/2", Quantity: 4, Interleaved: 10021449980408, Dimensions (in): 13-1/2 x 10 x 4-1/2 |
Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges |
Rectorseal |
021449980401 |
|
|
|
|
Uponor |
|
|
|
|
|
PASCO SPECIALTY & MFG INC |
|
|
|
|
|
BETTER ENTERPRISE CO LTD |
|
|
|
|
|
PASCO SPECIALTY & MFG INC |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
|
|
Uponor |
|
|
|
|
|
RIDGID |
|
|
|
|
|
PASCO SPECIALTY & MFG INC |
|
|
|
|
Allows You To Meet Requirements Of D.O.T. 192.283, Economical:, Far less expensive than Electric tools. Affordable!, Quick Line Repairs:, Allows fast, convenient, quality fusion., Portable:, Weighs only 3-1/2 lbs. reinforced coating., Durable No Stick Coating:, Stainless Steel., Interchangeable stub & socket:, One tool capable of fusing sizes 3/4", 1", 1-1/4" & 2"., Easy To Read Thermometer:, Large dial recessed in handle., Also: 1/2, "-4" combination STUB OR SOCKET tool also available. |
GEORG FISCHER CENTRAL PLASTICS |
|
|
|
|
|
Oatey SCS |
|
|
|
|
|
BETTER ENTERPRISE CO LTD |
|
|
|
|
Model K-60SP Machine with: Operator s Mit, Pin Key & Rear Guide Hose, Plus: Tool Kit & Cable Kit., A compact machine for institutional, commercial/residential cleaning. Also ideal for septic tank, vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages, 1/2 HP motor. CSA approved., K-60SP-SE Includes:, K-60SP Machine, A-1 Operator s Mit, A-60-12 Rear guide hose, A-8 Cable Carrier, 5 Sections of C-10 7/8" Cable (75 ), T-101, T102 & T-125 Augers, T107 & T150-1 Cutters, A-3 Tool Box, A-12 Pin Key |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
|
Drop head dies. Head locks in or releases by pull of ratchet knob. Separate sets of alloy steel chaser dies, quickly removed or reversed for close-to-wall threads. Ratchet and handle complete. |
REED MFG. COMPANY |
|
|
|
|
|
Jones Stephen Cor |
|
|
|
Size: 2", Quantity: 4, Interleaved: 10021449980415, Dimensions (in): 13-1/2 x 10 x 4-1/2 |
Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges |
Rectorseal |
021449980418 |
|
|
|
Allows You To Meet Requirements Of D.O.T. 192.283, Economical:, Far less expensive than Electric tools. Affordable!, Quick Line Repairs:, Allows fast, convenient, quality fusion., Portable:, Weighs only 3-1/2 lbs. reinforced coating., Durable No Stick Coating:, Stainless Steel., Interchangeable stub & socket:, One tool capable of fusing sizes 3/4", 1", 1-1/4" & 2"., Easy To Read Thermometer:, Large dial recessed in handle., Also: 1/2, "-4" combination STUB OR SOCKET tool also available. |
GEORG FISCHER CENTRAL PLASTICS |
|
|
|
|
|
BETTER ENTERPRISE CO LTD |
|
|
|
|
|
Oatey SCS |
|
|
|
|
12" maximum pipe capacity, 2500 Lb. Max. weight capacity. Model VJ-99 V-Head High Pipe Stand: heavy-duty adjustable pipe stand, suitable for use with threading machines, roll groovers, etc. |
REED MFG. COMPANY |
|
|
|
|
|
Jones Stephen Cor |
|
|
|
Size: 3", Quantity: 4, Interleaved: 10021449980422, Dimensions (in): 13-1/2 x 10 x 4-1/2 |
Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges |
Rectorseal |
021449980425 |
|
|
|
|
RIDGID |
|
|
|
|
|
BETTER ENTERPRISE CO LTD |
|
|
|
|
|
RIDGID |
|
|
|
|
|
Jones Stephen Cor |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
Size: Single 3/4, Weight: 0.48 lbs, Quantity: 6, Interleaved: 10021449972519, Dimensions (in): 1 x 1 x 4, Cubic Feet: 0.14 |
The world s only self-locking, reversible, internal wrench, Can remove the most stubborn nipples, Works on Corroded Pipe, No thread damage, Self-Locking and Reversible, For use with Schedule 40 Pipe, Made of Heat Tempered Steel, Fits Standard 3/8 and 1/2 Ratchets, Patent # 6,675,679B2. |
WILDE TOOL CO INC |
085432020024 |
|
|
|
|
SEARGANT |
|
|
|
|
|
FLAIR-IT SALES |
|
|
|
|
The flair-it pro installation tool is used to install flair-it pro rings within seconds. This tool is compact and easy to use in tight spaces. There is no other system as fast and easy as the flair-it pro system. |
FLAIR-IT SALES |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! |
IPS Corporation |
|
|
|
|
Quality, oil tempered, flat spring steel wire tape for cleaning all sizes of sewers & drains. Automatic grip handle helps force tapes back & forth easily. Tapes furnished with spear point on one end & roller ball point on the other. |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. |
RIDGID |
|
|
|
|
The only wrench capable of tightening the compression nut at the floor on a dishwasher. |
RIDGID |
|
|
|
|
Hi-tensil spring wire with handle., 3/8" x 50' spiral gimlet head. |
GENERAL WIRE SPRING |
|
|
|
|
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Plated wire. Features sturdy wood handle, vinyl bowl guard, 1 piece integral auger head. 3 ft. long. |
GENERAL WIRE SPRING |
|
|
|
|
|
GENERAL WIRE SPRING |
|
|
|
|
|
GENERAL WIRE SPRING |
|
|
|
Size: 3-1/2" |
Wrought steel |
Jones Stephen Cor |
|
|
|
|
|
Oatey SCS |
|
|
|
|
1/4" IPS, male thread 2-1/2" diameter |
BETTER ENTERPRISE CO LTD |
|
|
|
|
12" maximum pipe capacity, 2500 Lb. Max. weight capacity. Model RJ-99 V-Roller Head High Pipe Stand: heavy-duty adjustable pipe stand, suitable for use with threading machines, roll groovers, etc. |
REED MFG. COMPANY |
|
|
|
|
|
SEARGANT |
|
|
|
|
|
FLAIR-IT SALES |
|
|
|
Size: 4", Quantity: 4, Interleaved: 10021449980439, Dimensions (in): 13-1/2 x 10 x 4-1/2 |
Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges |
Rectorseal |
021449980432 |
|
|
|
|
Jones Stephen Cor |
|
|
|
|
|
BETTER ENTERPRISE CO LTD |
|
|
|
Size: 4-Way Key |
Plated steel, For valve, faucet and sillcock sizes 1/4", 9/32", 5/16" and 11/32", Carded |
Jones Stephen Cor |
|
|
|
|
|
Oatey SCS |
|
|
|
|
Standard funnel auger is the second tool fed into the line blocked with roots. |
RIDGID |
|
|
|
Size: 5/16" x 50’, Weight: 7 Lb. |
|
RIDGID |
|
|
|
|
Heavy duty die-cast aluminum dumbbell installs or removes tub drains & closet spuds without crossbars. Fits all 17 modern tub configurations. Doesn t scratch finishes. Made in U.S.A. |
PASCO SPECIALTY & MFG INC |
|
|
|
Size: 6’ |
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
Weight: 0.80 lbs, Overall Length: 9-3/4’’ (248 mm), Handle Color: Red, Crimps: 10-22 AWG |
Accommodates wire from No. 10 to 22 AWG., Specially hardened wire cutter in nose., Tapered nose design for working in confined spaces., Crimping die marked for insulated and non-insulated solderless terminals and connectors., Plastic-dipped, cushioned handles for comfort. |
Klein Tools Inc |
|
|
|
Weight: 0.85 lbs, Overall Length: 9-3/4’’ (248 mm), Handle Color: Black, Crimps: 10-22 AWG |
Designed for crimping non-insulated solderless terminals and connectors, Specially hardened wire cutter in nose., Tapered nose for working in confined spaces., Plastic-dipped cushioned handles for comfort. |
Klein Tools Inc |
|
|
|
|
|
RIDGID |
|
|
|
|
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter |
RIDGID |
|
|
|
|
Tough leather, heavily riveted for max. strength against rotating cable. |
RIDGID |
|
|
|
|
Tough leather, heavily riveted for max. strength against rotating cable. |
RIDGID |
|
|
|
|
|
ILSCO |
|
|
|
|
Basin BUddy, Includes 3/8" ratchet adapter |
WAL-RICH CORP |
|
|
|
|
|
RIDGID |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
|
Crank handle is anchored to base. Rugged cast-iron base has jaws of hardened alloy steel, handy pipe rest & bender. Capacities of 1/8"- 8". |
REED MFG. COMPANY |
|
|
|
|
Crank handle is anchored to base. Rugged cast-iron base has jaws of hardened alloy steel, handy pipe rest & bender. Capacities of 1/8"- 8". |
REED MFG. COMPANY |
|
|
|
|
Crank handle is anchored to base. Rugged cast-iron base has jaws of hardened alloy steel, handy pipe rest & bender. Capacities of 1/8"- 8". |
REED MFG. COMPANY |
|
|
|
|
|
Southwire Company |
|
|
|
Skid Quantity: 1152, Inner Quantity: 4, Master Quantity: 32 |
Combo key, Combination water meter box key and cut off, Used to open meter boxes and turn water off at meter, Retailer request to complete plumbing project |
B&K LLC |
032888510647 |
|
|
|
The fastest and easiest way to remove brass compression rings and ferrules when removing old, existing water shutoffs and angle stops. The Brass Compression Ring Remover simply splits the brass ring or ferrule. |
EBBCO / SAF-T-KUT |
|
|
|
|
|
Southwire Company |
|
|
|
|
Model K-60SP Machine with: Operator s Mit, Pin Key & Rear Guide Hose, Plus: Tool Kit & Cable Kit., A compact machine for institutional, commercial/residential cleaning. Also ideal for septic tank, vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages, 1/2 HP motor. CSA approved., K-60SP-SE Includes:, K-60SP Machine, A-1 Operator s Mit, A-60-12 Rear guide hose, A-8 Cable Carrier, 5 Sections of C-10 7/8" Cable (75 ), T-101, T102 & T-125 Augers, T107 & T150-1 Cutters, A-3 Tool Box, A-12 Pin Key |
RIDGID |
|
|
|
|
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
45 ft. - 6 lengths C-8 Open Wind Cable, A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 Grease "C" Cutter, A-13 Coupling Pin, A-14-6 Guide Hose |
RIDGID |
|
|
|
|
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable |
RIDGID |
|
|
|
|
|
B&K LLC |
|
|
|
|
|
B&K LLC |
|
|
|
|
It s rugged design and high tensile strength rubber lends itself to withstand higher pressures and to work effectively in larger pipes. |
Oatey SCS |
|
|
|
|
It s rugged design and high tensile strength rubber lends itself to withstand higher pressures and to work effectively in larger pipes. |
Oatey SCS |
|
|
|
Motor: 1/3 HP, 115V, 60Hz Induction Motor or 1/3 HP, 230V Induction Motor, Switch: Toggle On/Off, Copper and Stainless Steel Fittings Capacity: 1/2" - 2", Copper and Stainless Steel Tube Capacity: 1/2" - 2", Cutter Wheel: Model 2191 HD Wheel, Reamer: Single Flute Cone, RH, 1/2" to 2", Roller Speed: 450 RPM |
|
RIDGID |
|
|
|
|
|
SEARGANT |
|
|
|
|
|
RIDGID |
|
|
|
|
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter |
RIDGID |
|
|
|
|
It s unique expanding design allows The Drain Key to internally grip in a 360 pattern. The drain Key s aluminum shoes will not mar chrome or special finishes. Installs and removes tub drains, closet spuds and pipe nipples., Expands with a crescent wrench to unlock or install:, Bathtub drains, 1-1/4 or 1-1/2 Trap (dirty arm) nipples, 1-1/4 or 1-1/2 closet spuds, Jr. basket strainers, Jr. duo strainers, tray plug drains and duplex strainers, Made in U.S.A. |
PASCO SPECIALTY & MFG INC |
|
|
|
|
Tightens most fiberglass shower stall drain locknuts and die cast baskets., Fits brass locknuts or brass shower stall drains, Fits 3-1/2 plastic locknuts, Fits 3-3/8 die cast basket strainer locknuts |
PASCO SPECIALTY & MFG INC |
|
|
|
|
|
Elkay Mfg Co |
|
|
|
|
This unique tool fits either slotted or square countersunk cleanout plugs. Strong, malleable iron |
PASCO SPECIALTY & MFG INC |
|
|
|
|
Flares, sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
Extracts all non-accessible broken frost proof faucets to 14". No other tool can accomplish this task. Other uses include: extracts galvanized or steel nipples (1/4" - 1/2"), & extracts most faucet seats. Limited Lifetime warranty. |
FSC TOOL INC. |
|
|
|
|
2 in 1 Tool., A must for installing water fountain cartridges! Tightens or loosens cartridge retaining bushing. Prevents bushing thread damage which causes leaks. |
PASCO SPECIALTY & MFG INC |
|
|
|
|
Ideal for tough jobs up to 250 . Powerful, yet quiet universal motor & gearbox bear down as cutter engages tough obstructions., Specifications:, Powerful, yet quiet 4/10 HP, universal motor & gearbox, Cable spins at 200 RPM, CSA approved, Standard Accessories:, T-406 Spear Blade, T-407 Retrieving Auger, T-411 2" Double Cutter, T-413 3" Double Cutter, T408 Sawtooth Cutter, T403 3" P-Trap Cutter, T468 Flexible Leader, Leather Gloves, Tool Box & Hex Set, T-414B 4" Double Cutter (Blade only), T-416B 6" Double Cutter (Blade only) |
RIDGID |
|
|
|
Quantity: 3, Interleaved: 10021449972588, Dimensions (in): 10-1/4 x 5-1/4 x 6, Cubic Feet: 0.22 |
A unique tool that simplifies the removal of old tub drains even when cross arms are broken out or missing., Patented design utilizes a standard 3/8 drive ratchet to either extract or install tub drains quickly and easily., Use to install new tub drains, Built in bolt/screw remover, Universal size, Patent # 7,024,972., Patent # 7,024,972., Made of heat tempered steel, For extracting tub drains, Removes bolts/screws where the heads are broken off or just won t move |
Rectorseal |
021449972581 |
|
|
|
|
Milwaukee Electric |
|
|
|
|
Removes large and small handles Economical yet tough,, 1 piece forged drive bracket, 4" bracket width, 5" gripper fingers |
Jones Stephen Cor |
|
|
|
|
|
SEARGANT |
|
|
|
|
Includes:, Model SF3 Heater with high temp handle, Model SF3 Heater Muff, Clamp Bracket Assembly, 1-5/8" Capacity Ratchet Cutter, 3/4" IPS Socket Tooling Kit, 1-1/4" IPS plug and socket, 500 Temp-Stik, 525 Temp-Stik, Digital Countdown Timer, Wrench Hex Key 3/16", Wrench Hex Key Screwdriver 3/16", Professional Tool Box 26" Yellow and Black, Procedure Manual, Designed to provide you with the most coverage regardless of the job., The Intermediate Kit is designed to provide you with the most common sizes you need to make your installation quick and easy. |
GEORG FISCHER CENTRAL PLASTICS |
|
|
|
|
|
RIDGID |
|
|
|
Weight: 5 Lb., Pipe Capacity: 2-1/2" |
|
RIDGID |
|
|
|
|
5/16" or 35 of 3/8" |
RIDGID |
|
|
|
|
|
SEARGANT |
|
|
|
|
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) |
RIDGID |
|
|
|
|
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable |
RIDGID |
|
|
|
|
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable |
RIDGID |
|
|
|
|
Ideal for tough jobs up to 250 . Powerful, yet quiet universal motor & gearbox bear down as cutter engages tough obstructions., Specifications:, Powerful, yet quiet 4/10 HP, universal motor & gearbox, Cable spins at 200 RPM, CSA approved, Standard Accessories:, T-406 Spear Blade, T-407 Retrieving Auger, T-411 2" Double Cutter, T-413 3" Double Cutter, T408 Sawtooth Cutter, T403 3" P-Trap Cutter, T468 Flexible Leader, Leather Gloves, Tool Box & Hex Set, T-414B 4" Double Cutter (Blade only), T-416B 6" Double Cutter (Blade only) |
RIDGID |
|
|
|
|
Repair chips, cracks and small holes in fiberglass and acrylic showers and baths |
NORMAN MENAKER |
|
|
|
|
This sturdy socket tool removes all sizes of Oetiker stainless steel clamps with ease!, Just slide the ear into the opening and twist it off! |
SEARGANT |
|
|
|
Hose Length: 2,6 m ( 5,2 m span), Refrigerant: R-507, Capacity (Copper Tube): 1/2" x 2-1/2", Capacity (Steel Pipe): 1/2" x 2", Compressor: Rotary, 230V, 50 Hz, 2.4A, 505W, Dimensions LxWxH: 22-7/8" x 11" x 14-1/2" |
|
RIDGID |
|
|
|
|
Malleable iron, bright finish. Holds pinup plugs and basket strainers in position & keeps them from turning while installation is being made. |
Sioux Chief Mfg |
|
|
|
|
|
REED MFG. COMPANY |
|
|
|
|
The Uponor ProPEX 201 Corded Expander Tool meets the need for reliable, cost-effective solutions to commercial-sized 2" PEX installations., This 110-volt, electro-hydraulic tool makes fast, easy connections for 2" Uponor PEX tubing., The ProPEX 201 Corded Expander Tool uses the same 2" H-series expander heads currently in use with other Uponor tools., ProPEX 201 Corded Expander Tool Kit includes 2" head. |
Uponor |
|
|
|
|
|
Uponor |
|
|
|
|
|
RIDGID |
|
|
|
|
For All Types of Push-Lock Fittings, Fast and easy removal of push-lock fittings., Works on all types of 3/8", 1/2" and 3/4" pushlock fittings., Works on copper, PEX and CPVC materials., Heavy-Duty Design - Spring action., Ideal for hard to access areas. |
Mill Rose Company |
|
|
|
|
|
ZURN PEX. INC |
|
|
|
|
Flares, sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" |
RIDGID |
|
|
|
|
Remove shower and sink drains from the top or bottom with just one hand!, Eliminates the need for all other, Box End, wrenches, Fits most common styles of brass & plastic shower / sink drains, T handle rotates 180 for easy access and maximum leverage, Ideal for working in tight areas, Made of extremely durable, high impact polycarbonate polyester, Ideal for retrofits and new installations |
Mill Rose Company |
|
|
|
|
|
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
FLAIR-IT SALES |
|
|
|
|
The Remote Transmitter is an accessory for the KD-4510 (T0553) & KD-4550 (T0559) Pointer TM Line Locating Equipment. It can be attached to drain cleaning cables, jetter hoses, or other pushing devices. |
RIDGID |
|
|
|
|
|
Uponor |
|
|
|
|
|
RIDGID |
|
|
|
|
It s rugged design and high tensile strength rubber lends itself to withstand higher pressures and to work effectively in larger pipes. |
Oatey SCS |
|
|
|
Pricing Category: SR06, Stock or OAN: s, Description2: W/ BUBBLER LEVEL |
Combination holdup tool and bubble level makes proper rotor installation easier, Works with Rain Bird 5000 Series, 5500 Series, Falcon 6504, 7005 and 8005 Series Rotors |
RAIN BIRD CORP |
|
|
|
Pricing Category: SR06, Stock or OAN: s, Description2: W/ PULL UP FEATURE |
The universal Rain Bird rotor tool., Flat blade screwdriver and pull-up tool all in one. |
RAIN BIRD CORP |
|
|
|
|
Designed for soft soldering (50/50, 95/5 Alloys) 1/4" - 1-1/2" Copper Tube. Six feet of cable., Flameless soldering easy-to-use., Built-in handle and cord wrap., Specially designed for repair and renovation jobs., Approved by CSA to CSA and UL standards (115V only). |
RIDGID |
|
|
|
|
Soft solders 1/4" - 3" tube., Flameless soldering-easy-to-use., Twelve feet of cable., Fully contained in metal carrying case., Approved by CSA to CSA and UL standards (115V only). |
RIDGID |
|
|
|
|
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) |
RIDGID |
|
|
|
|
|
RIDGID |
|
|
|
|
|
SPECIALTY SALES & MFG CO INC |
|
|
|
|
Fits Sloan valve parts to service & repair valves without damaging the finish or value. |
Sloan Valve Co |
|
|
|
|
5 sockets with handle & holding pin |
BETTER ENTERPRISE CO LTD |
|
Square End
Locke Part #: A0466
MFG Part #: 08-0401
|
|
Tapered Angle Seat Wrench |
KISSLER & CO |
|
|
|
|
Removes Moen stems and Moen cartridges from faucets and shower valves. Removes brass cartridges. Removes brass stems. Removes plastic stems & cartridges. Precision made. High quality steel components. One piece construction. Easy to use. Made in U.S.A. |
PASCO SPECIALTY & MFG INC |
|
|
|
|
|
RIDGID |
|
|
|
|
Gets through urinals where other snakes can't. A specially designed spring has the toughness and flexibility to negotiate tight urinal bends. Telescoping Teletube model TU4 features a 48" spring for clearing stoppages beyond the urinal. |
GENERAL WIRE SPRING |
|
|
|
Model: 83764 |
|
IPS Corporation |
12181837641 |
|
|
Model: 83687 |
Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! |
IPS Corporation |
12181836873 |
|
|
Model: 83765 |
|
IPS Corporation |
12181837658 |
|
|
Model: FCRP3 |
Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! |
IPS Corporation |
12181836880 |
|
|
Model: 83766 |
|
IPS Corporation |
12181837665 |
|
|
Model: FCRP35 |
Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! |
IPS Corporation |
12181836897 |
|
|
Model: FCRP4 |
Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! |
IPS Corporation |
12181836903 |
|
|
Model: 83767 |
|
IPS Corporation |
12181837672 |
|
|
Model: MCO2 |
Designed for use in a cleanout to test up to 40 vertical feet of pipe. No tools or equipment are required for a quick installation. With its clear cap, water can be released without splashing out of the cleanout., Clear cap provides a window to monitor the test media as it drains, Expandable rubber gasket provides air and water tight seal, Durable design; plated steel parts will not rust, No tools, hoses, or gauges are required for installation, Hand tighten in seconds |
IPS Corporation |
12181836569 |
|
|
Model: MCO3 |
Designed for use in a cleanout to test up to 40 vertical feet of pipe. No tools or equipment are required for a quick installation. With its clear cap, water can be released without splashing out of the cleanout., Clear cap provides a window to monitor the test media as it drains, Expandable rubber gasket provides air and water tight seal, Durable design; plated steel parts will not rust, No tools, hoses, or gauges are required for installation, Hand tighten in seconds |
IPS Corporation |
12181836576 |
|
|
Model: MCO4 |
Designed for use in a cleanout to test up to 40 vertical feet of pipe. No tools or equipment are required for a quick installation. With its clear cap, water can be released without splashing out of the cleanout., Clear cap provides a window to monitor the test media as it drains, Expandable rubber gasket provides air and water tight seal, Durable design; plated steel parts will not rust, No tools, hoses, or gauges are required for installation, Hand tighten in seconds |
IPS Corporation |
12181836583 |
|
|
Model: 83785 |
Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! |
IPS Corporation |
12181837856 |
|
|
Model: 83791 |
Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! |
IPS Corporation |
12181837917 |
|
|
|
|
Uponor |
|
|
|
|
Repair chips, cracks and small holes in fiberglass and acrylic showers and baths |
NORMAN MENAKER |
|
