Water Heaters Categories

Loading ...

Loading ...

Search in: Water Heaters Category

.5gpm 2.9KW 115-120v 25A Heater
Locke Part #: E1450 MFG Part #: MINI 3 220816
Unlimited supply of hot water, Compact design saves space, Major energy savings, Proven reliability, The MiniTM heats water instantaneously STIEBEL ELTRON
.5gpm 3 KW 120V 25A Heater
Locke Part #: E1452 MFG Part #: DHC-3-1 074050
Unlimited supply of hot water, Sleek design saves space, Major energy savings, Proven reliability, DHC tankless water heaters are designed for installation at the point-of-use. The DHC heats water instantaneously as it flows through the unit. STIEBEL ELTRON
.5gpm 3.3 KW 240V/1PH 25A Heater
Locke Part #: E1453 MFG Part #: DHC-3-2 074052
Unlimited supply of hot water, Sleek design saves space, Major energy savings, Proven reliability, DHC tankless water heaters are designed for installation at the point-of-use. The DHC heats water instantaneously as it flows through the unit. STIEBEL ELTRON
.5gpm 3.8 KW 240V/1PH Heater 16A
Locke Part #: E1454 MFG Part #: DHC-4-2 074053
Unlimited supply of hot water, Sleek design saves space, Major energy savings, Proven reliability, DHC tankless water heaters are designed for installation at the point-of-use. The DHC heats water instantaneously as it flows through the unit. STIEBEL ELTRON
.75gpm 5.7KW 220/240v Heater 30A
Locke Part #: E1451 MFG Part #: MINI 6 220817
Unlimited supply of hot water, Compact design saves space, Major energy savings, Proven reliability, The MiniTM heats water instantaneously STIEBEL ELTRON
Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F. BrassCraft
Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F. BrassCraft
Superior corrosion resistance to harsh chemicals found in common household cleaning and plumbing repair products, Won t work harden even with repeated bending, Greater strength & flexibility. The patented polymer braid exhibits greater elasticity than stainless steel braiding, significantly increasing the flexibility of the connector, No kinking, no crimping. The polymer braided jacket is specially engineered to bend freely without kinking or crimping the connector, Available for PEX connections, No dielectric union needed with installation as the braiding and rubber are constructed of non-conductive materials, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and offer a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply. 100% Compliant, Not intended for use with recirculating water systems that produce continuous use temperatures above 115 F. BrassCraft
1" 150lb. 3" Long Shank Relief Valve
Locke Part #: E0599 MFG Part #: FVMX-3LS 150#
1" 150lb. Long shank. AGA certified 500,000 btu/hr, ASME rated 2,155,000 btu/hr@150lb. For commercial hot water storage tanks. SHARKBITE
304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts FALCON STAINLESS
Industrial-strength plastic filter housings with clear bowls. "B" models feature a pressure-release button for easy cartridge changing. NSF approved. 1" connections. 12-1/, " overall length. Watts Regulator
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
1"CPVC Drain Pan Fitting Kit
Locke Part #: E1071 MFG Part #: 11442
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
1-1/2" Bronze Flange for E0678
Locke Part #: E1145 MFG Part #: 539615
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
1-1/4" - 1-1/2" Flange Replacement Gasket
Locke Part #: E1173 MFG Part #: 91130185
Grundfos Pumps
1.5gpm 9.6 KW 240V 1PH 50A Heater
Locke Part #: E1456 MFG Part #: DHC-10-2 074056
Unlimited supply of hot water, Sleek design saves space, Major energy savings, Proven reliability, DHC tankless water heaters are designed for installation at the point-of-use. The DHC heats water instantaneously as it flows through the unit. STIEBEL ELTRON
Pressure-Temperature, Maximum Temperature: 212 degrees F (100 degrees C), Maximum Working Pressure: 100 psi (6.9 bars), Adjustment, Range, : 10-25 psi (68.7 - 172.4 kPa) set at 15 psi (103.4 kPa) Watts Regulator
1/2" FIP Anti-Scald
Locke Part #: E0048 MFG Part #: 0559116
Watts Regulator
With clip on mount, shielded wire, with PVC jacketed cable. Grundfos Pumps
With clip on mount, shielded wire, with PVC jacketed cable. Grundfos Pumps
1/2" MPT Thermometer
Locke Part #: E0671 MFG Part #: 1722014
Dual Scale: 40 -250 F, 0 -120 C, 5 Increments, 2-1/2" Face, Brass wells Wal-Rich Corporation
1/4" NPT Icemaker Water Filter
Locke Part #: E0024 MFG Part #: 7100454
For ice makers, coffee makers and tea makers. Filters out dirt, rust, scale, and removes taste and odor-causing contaminants. Produces clean, fresh water. Watts Regulator
Pipe Size 1 In, 60 Microns, Height 15 In, Dia 5 In, Flow Rate 35 GPM, Connection 1 In NPT, Max. Temp. 120 F, Max. Pressure 100 PSI NORTHSTAR WATER
11.5 KW 240V 47.9A Circulation Heater
Locke Part #: E0651 MFG Part #: 11.5HHL
Especially designed for the electric low-cost heating of Baptistry water by recirculation through the heater to provide evenly controlled temperature, Incoloy steel heating elements, Adjustable thermostat 47 -107 deg F, Well insulated with fiberglass, For use with 240V single phase power, Can be used with 208v, but heating is reduced 25%, Can be used with 120 Voltage, but heating is reduced 75%, Hi-Limit switch set at 118 F, 27" Height, 21" Bottom to Outlet, 5-1/2" Outlet to Top, 1" F.S.P.S. Inlet or Outlet, 7/8" Diameter Hole for B.X. Connector, Removable Terminal Cover, 25 Amps for 6 KW, 50 Amp for 11.5 KW Little Giant Manufacturing
115v 1/6hp Bronze Body 3 Speed Pump
Locke Part #: E0676 MFG Part #: 98961763SS
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
115v 1/6hp Cast Iron Body 3 Speed Pump
Locke Part #: E0672 MFG Part #: 52722512
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
115v 1/6hp Cast Iron Body 3 Speed Pump
Locke Part #: E0674 MFG Part #: 52722514
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
115V Brute 1 Speed Cast Iron 1/25 HP
Locke Part #: E1177 MFG Part #: 59896155
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
15/26 Flange Mount Cast Iron 3 Speed Pump
Locke Part #: E0314 MFG Part #: 59896341
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty Camco Manufacturing
1gpm 6 KW 240V 1PH 30A Heater
Locke Part #: E1455 MFG Part #: DHC-6-2 074424
Unlimited supply of hot water, Sleek design saves space, Major energy savings, Proven reliability, DHC tankless water heaters are designed for installation at the point-of-use. The DHC heats water instantaneously as it flows through the unit. STIEBEL ELTRON
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
For electric water heaters only, Durable plastic pans will not rust, corrode or crack, 1" drain fitting included (#11452), 2-1/2" high sides, Pre-cut side opening for drain fitting Camco Manufacturing
21" x 21" x 18", 50 Gallon Stand
Locke Part #: E0035 MFG Part #: GALV STAND
Holds up to a 50 gallon hot water heater., Complies with national fuel gas code & uniform plumbing code., Cross braced & locked legs prevent tipping. METAL-FAB
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
For electric water heaters only, Durable plastic pans will not rust, corrode or crack, 1" drain fitting included (#11452), 2-1/2" high sides, Pre-cut side opening for drain fitting Camco Manufacturing
230v 1/6hp Cast Iron Body 3 Speed Pump
Locke Part #: E0673 MFG Part #: 52722513
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
230v 1/6hp Cast Iron Body 3 Speed Pump
Locke Part #: E0675 MFG Part #: 52722515
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
For electric water heaters only, Durable plastic pans will not rust, corrode or crack, 1" drain fitting included (#11452), 2-1/2" high sides, Pre-cut side opening for drain fitting Camco Manufacturing
For gas or electric heaters, 1"/1.5" drain fitting included Camco Manufacturing
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
For electric water heaters only, Durable plastic pans will not rust, corrode or crack, 1" drain fitting included (#11452), 2-1/2" high sides, Pre-cut side opening for drain fitting Camco Manufacturing
29Plus 21.6kw @ 208v, 28.8kw @ 240v
Locke Part #: E1460 MFG Part #: TEMPRA 29 PLUS 223425
Unlimited supply of hot water, Sleek design saves space, Proven reliability, Digital Temperature Control STIEBEL ELTRON
3/4" FIP Anti-Scald
Locke Part #: E0049 MFG Part #: 0559119
Watts Regulator
304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts FALCON STAINLESS
304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts FALCON STAINLESS
304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts FALCON STAINLESS
304 Series Stainless Steel, Flows approx. 135% more than braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts FALCON STAINLESS
304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts FALCON STAINLESS
304 Series Stainless Steel, 3/4 ID SS Flex with 3/4 FIP x 7/8 Copper Sweat, Sweat Not available in braided type, Maintains optimum flow - no restriction, Kink and Crimp Free, Chrome plated brass nuts, Extremely Flexible, Will not corrode or rust, No Dielectric union required, Highest Quality EPDM washer, Resists work hardening, 100% Leak Tested, No Sweat Installation, Bright annealed, Lifetime Warrantee, Compliances/Listings:, ICC-ES PMG, ICC Listed, Tested & Certified, UPC, IPC, IMC, IRC (USA), Low Lead Compliant California Health & Safety Code 116875, ASME A112.18.6/CSA B125.6-2009 Compliant, NSF-61 (ICC-ES PMG Certified to ANSI/NSF section 9), State of Wisconsin, Commonwealth of Massachusetts FALCON STAINLESS
With clip on mount, shielded wire, with PVC jacketed cable. Grundfos Pumps
With clip on mount, shielded wire, with PVC jacketed cable. Grundfos Pumps
FALCON STAINLESS
FALCON STAINLESS
FALCON STAINLESS
For circulating chilled or hot water. 3 speed motor. Integral check valve. Grundfos Pumps
3/4" PEX x 3/4" FIP Swivel. 18"
Locke Part #: E1699 MFG Part #: 633x18
Brass FIP swivel nut includes EPDM gasket Sioux Chief
SHARKBITE
3/4" Tempering Valve
Locke Part #: E0051 MFG Part #: 0559136
Residential, . Mixes cold water & hot water. For automatic storage water heaters it increases draw capacity. Standard temp. range 100-130 F. max. temp. 210 F. Max. 150 psi. All bronze. Thermostat interchangeable. Watts Regulator
3/4" Vacuum relief
Locke Part #: E0083 MFG Part #: 0556031
Watts Regulator
3/4" x 3" Dielectric Nipple
Locke Part #: F0580 MFG Part #: 1995C
J B PRODUCTS/ALLEN DIVISION
3/4FIP X 3/4FIP X12 COPPER WHC
Locke Part #: L0958 MFG Part #: WB00-12N
Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only) BrassCraft 26613089287
3/4FIP X 3/4PEX X18 COPPER WHC
Locke Part #: L0008 MFG Part #: WB07-18
Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection BrassCraft 26613048871
3/4FIP X 3/4PEX X24 COPPER WHC
Locke Part #: L0006 MFG Part #: WB07-24
Patented Internal Dielectric Sleeve, No Dielectric Union Needed, Less Torque to Seal, Longer Connector Nuts, Available for PEX connection BrassCraft 26613100661
3/4FIP X3/4NOM M/FSWT X12 CPR
Locke Part #: L0009 MFG Part #: WB034-12N
Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply BrassCraft 26613089409
3/4FIP X3/4NOM M/FSWT X18 CPR
Locke Part #: L0011 MFG Part #: WB034-18N
Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply BrassCraft 26613089423
3/4FIP X3/4NOM M/FSWT X24 CPR
Locke Part #: L0012 MFG Part #: WB034-24N
Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable Nitrile rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, 100% compliant to California, Vermont and Maryland low-lead requirements, For use in exposed locations only to connect water heaters and other water connected devices to the water supply BrassCraft 26613093710
Insurance against water damage from gas water heater leaks. Meets SBCCI section 1213.7. Spun .032 aluminum construction. Pre-drilled with 1" drain connection., Recommended sizing to be 2" larger in diameter at the bottom of pan Camco Manufacturing
For electric water heaters only, Durable plastic pans will not rust, corrode or crack, 1" drain fitting included (#11452), 2-1/2" high sides, Pre-cut side opening for drain fitting Camco Manufacturing
36Plus 27kw @ 208v, 36kw @ 240v
Locke Part #: E1461 MFG Part #: TEMPR 36 PLUS 223426
Unlimited supply of hot water, Sleek design saves space, Proven reliability, Digital Temperature Control STIEBEL ELTRON
Enhanced product data is coming soon! Bradford White
Product Image Not Available 415-52909-01 BWC L P VAL RESID UNIV. RG1 MI M1
Locke Part #: E1564 MFG Part #: 415-52909-01
Enhanced product data is coming soon! Bradford White
Product Image Not Available 415-52909-02 BWC L P VAL RESID UNIV RG2 M4 M2
Locke Part #: E1565 MFG Part #: 415-52909-02
Enhanced product data is coming soon! Bradford White
Enhanced product data is coming soon! Bradford White
Product Image Not Available 415-53360-00 BWC L P VAL RESIDENTIAL 30-65 GAL
Locke Part #: E1563 MFG Part #: 415-53360-00
Enhanced product data is coming soon! Bradford White
Product Image Not Available 415-53361-03 BWC NAT VAL RESID UNIV RG275 RG2100
Locke Part #: E1562 MFG Part #: 415-53361-03
Enhanced product data is coming soon! Bradford White
Product Image Not Available 415-53361-04 BWC L P VAL RESID. UNIV MI100 RE275
Locke Part #: E1567 MFG Part #: 415-53361-04
Enhanced product data is coming soon! Bradford White
Product Image Not Available 415-53361-06 BWC L P VA LIGHT DUTY 75T80 100T88
Locke Part #: E1568 MFG Part #: 415-53361-06
Enhanced product data is coming soon! Bradford White
Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty Camco Manufacturing
1-3/8" thread screw-in style, For the State Industries manufactured Duron tank water heaters, Also used in Sears Duron tank water heaters Camco Manufacturing
5/8" x 3/4" Water Meter Lead Free
Locke Part #: M4545 MFG Part #: WM-75 5/8" X 3/4"
Hermetically sealed dry dial protected from the elements, won't discolor or fade, Proven multi-jet water meter design, Connections are external non-tapered meter threading (comes with Male NPT thread adapters), Integral strainer in measuring chamber protects measuring components from foreign debris., Tempered glass lens for continued readability., Hinged lens cover to protect lens and register from damage. Magnetic drive to eliminate potential leak point., Easy to read register display with large clear digits., Odometer measures in gallons up to 9,999,999(99,999,999 for WM150/200). Pepco Sales & Marketing
Bradford White
Made of highest grade Nickel and Chromium Alloy,Ultra low watt density, Resists dry firing, Recommended when water has high mineral content, Heats in lime and sand buildup that would burn out ordinary elements, Includes Gasket, UL listed for the USA and Canada, 5 year limited warranty Camco Manufacturing
6 KW 240V 25A Circulation Heater
Locke Part #: E0650 MFG Part #: 6-HHL
Especially designed for the electric low-cost heating of Baptistry water by recirculation through the heater to provide evenly controlled temperature., Incoloy steel heating elements., Adjustable thermostat 47 -107 F, Well insulated with fiberglass, For use with 240V single phase power, Can be used with 208v, but heating is reduced 25%, Can be used with 120 Voltage, but heating is reduced 75%, Hi-Limit switch set at 118 F, Specifications:, 27" Height, 21, " Bottom to Outlet, 5-1/2" Outlet to Top, 1" F.S.P.S. Inlet or Outlet, 7/8" Diameter Hole for B.X. Connector, Removable Terminal Cover, 25 Amps for 6 KW, 50 Amp for 11.5 KW Little Giant Manufacturing
Immersion section of unit made of Incoloy or Stainless Steel., All heat confined to the formed horizontal section for optimum heat efficiency., Cold riser extends to the top of container where control housing is located., 3-Conductor cord set with polarized plug included for easy installation and wiring at no extra charge., Adjustable vapor-proof thermostat control with temperature range off -55 F to 115 F., Hi-Limit cut out switch set at 125 F., Stainless Steel mounting bracket also supplied for easy mounting., Pilot light & on-off switch provided, indicates desired temp. when reached & breaks circuit when element is not in use. Saves electricity-saves money., UL listed Little Giant Manufacturing
Pipe Size 1 In, 60 Microns, Height 15 In, Dia 5 In, Flow Rate 35 GPM, Connection 1 In NPT, Max. Temp. 120 F, Max. Pressure 100 PSI NORTHSTAR WATER
Small to large homes, Works on COPPER, PVC, CPVC, PEX pipe, Moderately hard to very hard water area (up to 19 gpg), Indoor installation only, UL/CUL listed, Descaling Method:, Enclosure Specs:, made out of high-impact ABS moulded plastic., Signal Cable:, 18 gauge, single stranded wire, 46 feet long., Warranty:, 3 years with extended warranty available. Clearwater Enviro Technologies
Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only) BrassCraft
Superior galvanic corrosion resistance. Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion, No dielectric union needed with installation. Dielectric is built-in to the design of the connector, Less torque to seal against the pliable rubber washer, especially on rough nipple surfaces, Longer connector nuts allow a greater number of thread-to-thread contacts and a better seal, For use in exposed locations only to connect water heaters and other water connected devices to the water supply, 100% Compliant (WB00 only) BrassCraft
For electric water heaters only, Durable plastic pans will not rust, corrode or crack, 1" drain fitting included (#11452), 2-1/2" high sides, Pre-cut side opening for drain fitting IPS Corporation 12181883501
For gas or electric water heaters, Aluminum will not rust, corrode, or crack, Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2", Protect finished areas from water damage, Measures 21.72" Width x 14.17" Height x 11.62" Depth and weighs 2.3 pounds Camco Manufacturing
For gas or electric water heaters, Aluminum will not rust, corrode, or crack, Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2", Protect finished areas from water damage, Measures 21.72" Width x 14.17" Height x 11.62" Depth and weighs 2.3 pounds Camco Manufacturing
Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed Camco Manufacturing
Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed Camco Manufacturing
Energy efficient range setting, Built-in safety switch to prevent overheating, Carded thermostats are packed in convenient cut cases and come complete with detailed instructions and wiring diagrams for easy installation,, UL listed Camco Manufacturing
Pressure Rated: 400psi. Relief Valve, Pressure Settings: 75, 80, 100 or 125psi. Apollo Conbraco
This unit should be used with electric water heaters with up to 1 inlets., Also when treating well water with gas or electric, heaters, Maximum Pipe Diameter, - 1(can be installed on a 1-1/4softener loop), Flow Rate, - Flow rate is immaterial as far as Aqua-Rex is concerned., The greater the flow, the more effective the units tend to be, All external transformers are UL approved., Self-Diagnostic Guard Chip, Maintenance, - Once installed, the WK1 requires no maintenance., Lifecycle costs, - Running costs are less than $30.00 per annum., The design life is In excess of 25 years, 5-year manufacturer s warranty. AQUA-REX
An intermediate sized unit with external transformer, The extra pair of antennas can be used for treating a second pipe as well as reinforcing the signal applied to a single pipe, The WK2 is ideal for larger properties and treating especially hard water where a WK1 might be less effective., Maximum Pipe Diameter, 1-1/2, Flow Rate, - Flow rate is immaterial as far as Aqua-Rex is concerned., The greater the flow, the more effective the units tend to be., All external transformers are UL approved., Self-Diagnostic Guard Chip, Maintenance, - Once installed, the WK1 requires no maintenance., Lifecycle Costs, - Running costs are less than $30.00 per annum., The design life is In excess of 25 years, 5-year manufacturer s warranty. AQUA-REX
An easy to install unit with an external transformer., Suitable for most residential installations, especially gas water heaters on city water., All external transformers are UL approved., Self-Diagnostic Guard Chip, Maintenance: Once installed, the WK1 requires no maintenance., Lifecycle costs: Running costs are less than $30.00 per annum, The design life is In excess of 25 years., 5-year manufacturer s warranty. AQUA-REX
The same output as the WK1 but fully waterproof so it can be left outside exposed to the weather., It can be used to reduce scaling in swimming pools by attaching it to 2 re-circulation pipes between the pump and the water filter., It can be used on 1 supply pipes to externally mounted water heaters, It must not be used on 2 supply pipes., The transformer is rated for internal use only so it requires protection from the weather., Maximum Pipe Diameter -, 2 on re-circulating pool systems only, Flow Rate -, Flow rate is immaterial as far as Aqua-Rex is concerned., The greater the flow, the more effective the units tend to be., All external transformers are UL approved., Self-Diagnostic Guard Chip, Maintenance -, Once installed, the WK1 requires no maintenance., Lifecycle Costs, - Running costs are less than $30.00 per annum., The design life is In excess of 25 years, 5-year manufacturer s warranty. AQUA-REX
For commercial or home heating systems, 1/2" NPT, 20 -240 F temperature range, 3" dial in steel case, Back connection Wal-Rich Corporation
For commercial or home heating systems, 1/2" NPT, 20 -240 F temperature range, 3" dial in steel case, Bottom connection Wal-Rich Corporation
Application: Commercial, Suitable For Use With: Model CEHD50(A), CEHD80(A) and CEHD120(A) Water Heater Bradford White 671632161294
Bradford White 219-41375-00 Surface Thermostat
Locke Part #: E0703 MFG Part #: 219-41375-00
Application: Commercial, Temperature Rating: 180, Suitable For Use With: Model MII Surface Mounted Electric Water Heater Bradford White 671632278923
Temperature Rating: 180, Number of Poles: 1, Suitable For Use With: 59T Series Electric Water Heater Control SPST, Non-simultaneous, Double element, Dairy barn models Bradford White 671632637232
Temperature Rating: 180, Number of Poles: 1, Suitable For Use With: 89T33 Series Electric Water Heater Control SPDT, Non-simultaneous, Double element, Dairy barn models Bradford White 671632637249
Voltage Rating: 208, Wattage: 6000, Overall Length: 14.81, Watt Density: Very Low, Material: Incoloy For use with ASME series commercial electric energy saver water heater, For 18 in diameter tanks and above Bradford White 671632415205
Application: For commercial "A" ASME series water heaters, Voltage Rating: 240, Wattage: 4500, Material: Incoloy For 16 in Dia tanks and above Bradford White 671632415250
Voltage Rating: 208, Wattage: 6000, Overall Length: 13-1/4, Material: Incoloy For use with model E32 light duty three element water heater, 126 w/sq-in Bradford White 671632415694
Bradford White 222-40762-01 Natural Gas Valve
Locke Part #: E0445 MFG Part #: 222-40762-01
Color: White 1-1/4 in shank Bradford White 671632247370
Bradford White 222-80830-02 Natural Gas Valve
Locke Part #: E0386 MFG Part #: 222-80830-02
For model D38T155(E) (N,X) and D75T125(E) (N,X) gas water heater Bradford White 671632192199
Bradford White 222-80831-02 LP Gas Valve
Locke Part #: E1545 MFG Part #: 222-80831-02
Application: Commercial For model PDV80S150, PDV80S200, PDV80S250, PDV100S150, PDV100S200 and PDV100S250 water heater Bradford White 671632192304
Suitable For Use With: Model MII50(A), MII80(A) and MII120(A) Electric Water Heater Sand and Lime Fighter Element For Flanged Elements: Bradford White 671632162956
Application: Commercial, Suitable For Use With: Model 40A-kW-3, 50A-kW-3, 80A-kW-3 and 120A-kW-3 Water Heater For ASME common electric only Bradford White 671632417896
Length: 42, Suitable For Use With: Model LD40S and LD50S Water Heater, Material: Aluminum, Dimensions: 5/8 in Dia Bradford White 671632165971
Length: 43, Suitable For Use With: Model MI30TF (BN,CX,SX) and MI40TF (BN,CX,SX) Water Heater, Material: Aluminum, Dimensions: 5/8 in Dia Bradford White
Application: Residential, Length: 56-5/8, Thread Size: 1 in NPT, Suitable For Use With: Model M2120R Water Heater, Material: Aluminum, Dimensions: 3/4 in Dia Bradford White 671632563678
Length: 44, Suitable For Use With: Model MI404TF(BN, CX, SX) Water Heater, Material: Magnesium Bradford White 671632718771
Length: 44.13, Suitable For Use With: Model MI40TF (BN, CX, SX) and M440TF (BN, CX, SX) Water Heater, Material: Magnesium, Dimensions: 0.84 in Dia Bradford White 671632713080
Application: Residential, Length: 51.13, Thread Size: 3/4 in NPT, Suitable For Use With: Model M180R6DS, M180R, M2HE65R, M2HE65RDS, M2HE80R and M2HE80RDS Water Heater, Material: Magnesium, Dimensions: 0.84 in Dia Bradford White 671632715299
Length: 39-1/8, Suitable For Use With: Model MI30TF (BN,CX,SX) and MI30SF (BN,CX,SX) Water Heater, Material: Aluminum A420 hot water outlet Bradford White 671632758524
Suitable For Use With: Water Heater, Material: Brass Bradford White 671632840793
Application: Commercial Application, Suitable For Use With: Model D65T625(N, X)(A) and D80T725(N, X)(A) Gas Water Heater Bradford White 671632183555
Suitable For Use With: Model M2C504T(CX, EN)-12 and M2C75T(CX, CN)-12 Gas Water Heater, Specifications: 3/4 in NPT, Dimensions: 2 in L Bradford White 671632163120
Suitable For Use With: Model LD120R Electric Water Heater, Specifications: 1 in or 2-1/2 in Nipple, Material: Polypropylene, Dimensions: 55 in L Bradford White 671632563203
Suitable For Use With: Model RG240T(N, X)-500 and RG240T(N, X) Gas Water Heater Bradford White 671632817801
Nominal Size: 3/4, Pressure Rating: 150, Temperature Rating: 210, End Style: Female For use with model CF-70-3 BW506 water heater, 4-1/2 in stem, 205k Btus/hr Bradford White 671632163212
Nominal Size: 1, Pressure Rating: 150, Temperature Rating: 210, End Style: Female For use with model D80T250(E)(N,X)(A), D75T300(E)(N,X)(A) and D65T370(E)(N,X)(A) water heaters, 4-3/4 in stem, 750k Btus/hr Bradford White 671632177615
Suitable For Use With: Model RG155H(N, X) and LG155H80(N, X) Water Heater, Dimensions: 20 in L For natural gas burner assembly Bradford White 671632281718
Application: Commercial, Suitable For Use With: Model D65T625(N, X)(A) and D80T725(N, X)(A) Gas Water Heater Bradford White 671632279777
Type: Dual Stat, Suitable For Use With: Model D38T155(E)(N, X) and D75T(125, 150)(N, X) Water Heater Bradford White 671632279791
Application: Commercial, Suitable For Use With: Model TW450S65F(BN, CX, SX) Water Heater Bradford White 671632602247
Suitable For Use With: Bradford White Water Heater, Color: White Bradford White 671632640010
Suitable For Use With: Model DH50T50F(BN,CX, SX) and DH1504TF(BN,CX, SX) Water Heater For natural gas BN burner assembly Bradford White 671632648580
Bradford White 233-46558-02 Well Sensor
Locke Part #: E1554 MFG Part #: 233-46558-02
Application: Commercial, Suitable For Use With: Model D38T155(E)(N, X), D65T370(E)(N, X)(A), D65T399(E)N(A) and D75T125(E)(N, X) Water Heater, Dimensions: 2-1/4 in L Bradford White 671632691630
Suitable For Use With: Model D65T370(E)(N, X)(A) and D65T399(E)N(A) Water Heater Dual sensor Bradford White 671632690947
Application: Commercial, Suitable For Use With: Model U65L155EN(A), U65L199EN(A), U65L270EN(A), U100L199EN(A), U100L270EN(A), U100L300EN(A) and U100L399EN(A) Ultra Low NOx Water Heater Bradford White 671632717408
Suitable For Use With: Model SDW2504TF(BN, SX), SDW265TF(BN, SX) and SDW275S(BN, SX) Water Heater For natural gas BN burner assembly Bradford White 671632693078
Suitable For Use With: Model D38T155(E)(N, X) and D75T125(E)(N, X) Water Heater Single sensor Bradford White 671632690961
Suitable For Use With: Bradford White Water Heater Bradford White 671632707294
Suitable For Use With: Model 75T80(B, S)(N, X), M2XR75S(BN, SX) and MI75S(BN, SX) Water Heater For natural gas BN burner assembly Bradford White 671632712380
Application: Residential, Suitable For Use With: Model DS140SF(BN, CX, SX), DS140SF(BN, SX), DS150SF(BN, CX, SX) and DS150SF(BN, SX) Water Heater Bradford White 671632712472
Suitable For Use With: Model D65T370(E)(N, X)(A), D65T399(E)N(A), D75T125(E)(N, X) and D75T160(E)(N, X) Water Heater, Material: Aluminum, Dimensions: 30 in L Bradford White 671632209910
Suitable For Use With: Model PDV80S150(E)(N,X) and PDV80S250(E)(N,X)(A) Water Heater Bradford White 671632200719
Type: Level 1, Suitable For Use With: Water Heater Bradford White 671632309603
Type: Level 2, Suitable For Use With: Water Heater Bradford White 671632315819
Suitable For Use With: Model MIITW50T(LN,EN,CX)10 and MIITW65T(EN,CX)10 Gas Water Heater For natural gas BN burner assembly Bradford White 671632247783
Suitable For Use With: Model D38T155(E)(N, X), D65T370(E)(N, X)(A) and D65T399(E)N(A) Water Heater Bradford White 671632724871
Bradford White 239-43370-00 Spark Igniter Gasket
Locke Part #: E0855 MFG Part #: 239-43370-00
Application: Commercial, Suitable For Use With: Model UCG100H Water Heater Bradford White 671632804498
Temperature Rating: 240 For use with model MI30SF and MI40TF (BN,CX,SX) commercial water heaters Bradford White 671632732081
Temperature Rating: 270, Type: Resettable, Color: Yellow Bradford White 671632732098
Temperature Rating: 290, Type: Resettable, Color: Red Bradford White 671632731824
Suitable For Use With: Model DS140SF(BN,CX, SX) and DS150SF(BN,CX, SX) Gas Water Heater Bradford White 671632542383
Suitable For Use With: Model PE2XR504T(BN,SX), PE4403S(BN,SX) and PE440T(BN,SX) Water Heater Bradford White 671632627318
Bradford White 239-45613-01 Natural Gas Valve
Locke Part #: E0990 MFG Part #: 239-45613-01
For model M1TW40S F(BN,CX,SX) and M1TW50S F(BN,CX,SX) water heater Bradford White 671632636891
Suitable For Use With: Model D38T155(E)(N, X) and D80L399(E)(N, X)(A) Flue Damper Electronic Ignition Water Heater 11-1/4 LG Bradford White 671632691753
Suitable For Use With: Model D65T625(N, X)(A) and D80T725(N, X)(A) Gas Water Heater Bradford White 671632690862
Nominal Size: 1 For use with MI30T, MI303T and MI40T water heaters Bradford White 671632692712
For model M2XR75S (BN,SX,CX,CN) and MI100T (BN,CX,CN) water heater Bradford White 671632709205
For model DH50T50F (B N,C X, S X) and DH50T50F(B N, S X) (-ONLY,-FLEX,-SOLID) water heater Bradford White 671632709212
For model 50T65F(B,C,S) (N,X) and 65T65F(B,C,S) (N,X) Water heater Bradford White 671632709229
For model MI30T F(BN,CX,SX) and MI30S F(BN,CX,SX) water heater Bradford White 671632709236
For model M2XR504T F(BN,CX,SX) and M430T F(BN,CX,SX) water heater Bradford White 671632709243
For model DH50T50F (B N,C X, S X) and DH50T50F(B N, S X) (-ONLY,-FLEX,-SOLID) water heater Bradford White 671632692729
Bradford White 239-47466-02 LP Gas Control Valve
Locke Part #: E1505 MFG Part #: 239-47466-02
Application: Commercial For model CDW275T10 and CSW275T10 water heater, 2 in cavity Bradford White 671632692736
Temperature Rating: 160 For model DH1504TF (BN,CX, SX) and DH1504T F(BN,SX) (-ONLY,-FLEX,-SOLID) water heater Bradford White 671632692750
Temperature Rating: 160 For model DH1504TF (BN,CX, SX) and DH1504T F(BN,SX) (-ONLY,-FLEX,-SOLID) water heater, The Bradford White ICON System service kits are available for direct replacement, or for the replacement of Robertshaw or White-Rodgers gas valves on most older Bradford White models Bradford White 671632692750
Suitable For Use With: Model GX, U1, U2, U4, MIMH and MIMS Water Heater, Specifications: 160 deg F Bradford White 671632708369
Bradford White 239-47853-00 Valve Body
Locke Part #: E1511 MFG Part #: 239-47853-00
For model 222-47463-01 and 222-47463-02 water heater Bradford White 671632708376
Temperature Rating: 160 For model MI30T F(BN,CX,SX) and MI30S F(BN,CX,SX) water heater Bradford White 671632692767
Bradford White 239-47859-00 Valve Body
Locke Part #: E1512 MFG Part #: 239-47859-00
For model 222-47465-01 and 222-47465-02 water heater Bradford White 671632708420
Bradford White 239-47872-00 Accessory Module Kit
Locke Part #: E1521 MFG Part #: 239-47872-00
Bradford White 67163247872
Package Length: 11.6, Package Height: 2.8, Package Width: 12.8, Package Weight: 2.045, Warranty: 6 years parts Electronic Sensor That Attaches To Bottom Of Water Heater Or Drain Pan, Sounds AlarmTo Alert To Water Leak, Sensor Will Send Signal To Accessory Module To Interrupt Burner Operation In Event Of Prolonged Leak, Includes Rubber Dam If There Is No Drain Pan - Icon Accessory Module Required Bradford White
Application: Heating Accessory, Includes: Integrated Mixing Device, Energy Saving Programmable Control, Programmability: 7 Integrated Mixing Device - advanced thermostatic mixing valve allows for higher stored water temperature, Increases usable hot water by 50% or more, while still providing comfortable outlet temperatures, Energy Saving Programmable Control - Features 7-day, 4 period programming, Large LCD display, hot water capacity indicator, temperature setback, approximate temperature readout and a back-up battery Bradford White
Suitable For Use With: Water Heater Bradford White 671632708468
Bradford White 239-48795-01 Natural Gas Valve
Locke Part #: E1547 MFG Part #: 239-48795-01
For model PDX140S F(BN,SX) and PDX150S F(BN,SX) water heater Bradford White 671632774531
Bradford White 239-49391-00 Power On/Off Switch
Locke Part #: E1553 MFG Part #: 239-49391-00
Application: Commercial For use with flue damper electronic ignition water heater Bradford White 671632757220
Suitable For Use With: Model PDV80S150(E)(N,X), PDV80S200(E)(N,X) and PDV80S250(E)(N,X)(A) Water Heater Bradford White 671632200290
Suitable For Use With: Model PDV80S150(E)(N,X), PDV80S200(E)(N,X) and PDV80S250(E)(N,X)(A) Water Heater Bradford White 671632200306
Type: Interlock Ignition, Suitable For Use With: Model D80T1993N, D100T1993N and D100T199(E)(N, X) 199000 Btu/hr Water Heater Bradford White 671632181551
Suitable For Use With: Model RG230S(N,X)-500 and RG230T(N,X)-500 Water Heater Bradford White 671632733224
Application: Residential, Suitable For Use With: Model CDW2504T10F(BN, CX, SX) Water Heater, Color: Gray Bradford White 671632733286
Dimensions: 3, Suitable For Use With: Model RG130T(N,X) and RG140T(N,X) Water Heater Bradford White 671632605187
For model EF100T150(E) (N,X)(A)2 and EF100T199(E) (N,X)(A)2 water heater Bradford White 671632635795
Type: Interlock Ignition, Suitable For Use With: Model D80T250(E)N(A) 250000 Btu/hr Water Heater Bradford White 671632192502
Specifications: 1, Type: Class-T, Suitable For Use With: Model MII50(A), MII80(A) and MII120(A) Water Heater Bradford White 671632293612
Application: Commercial/Residential, Temperature Rating: 160 Bradford White 671632640737
Bradford White 265-42034-00 Thermostat
Locke Part #: E0433 MFG Part #: 265-42034-00
Suitable For Use With: Model MITW40LLN(CX)-10 Water Heater Bradford White 671632291595
Body Material: Brass For use with model DW240L, DW250L, DW280L and DW265L water heaters Bradford White 671632647750
Application: Commercial, Body Material: Brass For electric energy saver ASME series water heater Bradford White 671632647767
Application: For residential series, commercial light duty (LD) series, commercial medium duty (E32) series, commercial (MII) series water heaters, Voltage Rating: 120, Wattage: 1500, Material: Copper For 12 in Dia tanks and above Bradford White 671632292769
Voltage Rating: 120, Wattage: 1500, Overall Length: 8-1/4, Watt Density: Low, Material: Copper For use with residential upright/lowboy water heater, For 12 in diameter tanks and above, 99 w/sq-in Bradford White 671632294060
Voltage Rating: 120, Wattage: 1500, Overall Length: 11-1/4, Material: Incoloy For use with residential upright/lowboy water heater, 71 w/sq-in Bradford White 671632706808
Voltage Rating: 240, Wattage: 5500, Overall Length: 13-1/4, Material: Copper For use with residential upright/lowboy water heater, For 14 in diameter tanks and above, 160 w/sq-in Bradford White 671632292745
Voltage Rating: 208/240, Overall Length: 13.13, Wattage: 4000 W at 208 VAC/5500 W at 240 VAC, Material: Incoloy For use with residential upright/lowboy water heater, 116 and 160 w/sq-in Bradford White 671632293643
Voltage Rating: 208/240, Overall Length: 10-7/8, Wattage: 3000 W at 208 VAC/4000 W at 240 VAC, Material: Incoloy For use with residential upright/lowboy water heater, For 12 to 14 in diameter tanks and above, 106 and 77 w/sq-in Bradford White 671632804825
Voltage Rating: 240, Wattage: 1500, Overall Length: 8-1/2, Material: Incoloy For use with residential upright/lowboy water heater, For 12 in diameter tanks and above, 93 w/sq-in Bradford White 671632566303
Specifications: 6, Suitable For Use With: Model D38T155(E)(N, X), D80T180(E)(N, X) and D80T199(E)(N, X) Water Heater Bradford White 671632733316
Dimensions: 8, Suitable For Use With: Model D65T370(E)(N, X)(A) and D65T399(E)N(A) Gas Water Heater, Specifications: 8 in Bradford White 671632733323
Suitable For Use With: Model EFR160T120(EN, SX), EF100T150(E)(N, X)(A)2 and EF100T199(E)(N, X)(A)2 Water Heater Bradford White 671632801411
Suitable For Use With: Model EF60T125(E)(N, X)(A)2 and EF60T150(E)(N, X)(A)2 Water Heater Bradford White 671632576548
Suitable For Use With: Model M2TW50TF(BN, CX, SX) and M2TW65TF(BN, CX, SX) Gas Water Heater Bradford White 671632610037
Suitable For Use With: Model M1TW40SF(BN, CX, SX) and M1TW50SF(BN, CX, SX) Gas Water Heater Bradford White 671632610020
Suitable For Use With: Model EFR160T120(EN, SX) and EF100T150(E)(N, X)(A)2 Water Heater Bradford White 671632636242
Bradford White 265-46181-01 Natural Gas Valve
Locke Part #: E0807 MFG Part #: 265-46181-01
For use with MI30T, MI30S, MI303T, MI40T, MI403S, MI404T, MI503, MI50L, MI504S, MI60T, MIXR403S Bradford White 671632639625
For model DH1504TF(BN,CX, SX) and DH165TF (BN,CX, SX) water heater Bradford White 671632642168
Application: Commercial/Residential, Temperature Rating: 160, Type: Atmospheric Bradford White 671632639687
Bradford White 265-46182-01 LP Gas Valve
Locke Part #: E0809 MFG Part #: 265-46182-01
For model MI30T F(BN,CX,SX) and MI30S F(BN,CX,SX) water heater Bradford White 671632641048
Application: Commercial/Residential, Temperature Rating: 160 Bradford White 671632648573
Application: Commercial/Residential, Temperature Rating: 180 Bradford White 671632648597
Application: Commercial and SVC Application, Type: Light Duty, Suitable For Use With: Model LDWH-6U, LDWH-12U, LDWH-20L and LDWH-30L Water Heater, Specifications: 208 VAC at 4500/4500 W Bradford White 671632638598
Application: Commercial and SVC Application, Type: Light Duty, Suitable For Use With: Model LDWH-6U, LDWH-12U, LDWH-20L and LDWH-30L Water Heater, Specifications: 480 VAC at 4500/4500 W Bradford White 671632638857
Application: Commercial and SVC Application, Type: Light Duty, Suitable For Use With: Model LDWH-6U, LDWH-12U, LDWH-20L and LDWH-30L Water Heater, Specifications: 480 VAC at 6000/6000 W Bradford White 671632638871
Application: Commercial and SVC Application, Type: Light Duty, Suitable For Use With: Model LDWH-6U, LDWH-12U, LDWH-20L and LDWH-30L Water Heater, Specifications: 208 VAC at 6000 W Bradford White 671632645589
Suitable For Use With: Model EFR160T120(EN, SX) and EF100T150(E)(N, X)(A)2 Water Heater Bradford White 671632722457
Suitable For Use With: Models M1TW40SF(BN, CX, SX), M1TW50SF(BN, CX, SX) and M1TW60TF(BN, CX, SX) Gas Water Heater Bradford White 671632666775
Application: Commercial/Residential, Temperature Rating: 180 Bradford White 671632682805
Application: Commercial/Residential, Temperature Rating: 180 Bradford White 671632682812
Specifications: 120, Suitable For Use With: Model UCG100H2703N, UCG100H2703X, UCG80H2703N and UCG80H2703X Water Heater Bradford White 671632849789
Application: Residential, Temperature Rating: 150, Number of Poles: 1, Suitable For Use With: Model RE120L, RE230L, RE240L and RE250L Water Heater Bradford White 671632795666
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 480 VAC, 9 kW Bradford White 671632850600
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 480 VAC, 12 kW Bradford White 671632850617
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 480 VAC, 15 kW Bradford White 671632850631
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 480 VAC, 18 kW Bradford White 671632850648
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 480 VAC, 24 kW Bradford White 671632850655
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 480 VAC, 36 kW Bradford White 671632850693
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 480 VAC, 54 kW Bradford White 671632851614
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 240 VAC, 9 kW Bradford White 671632851294
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 240 VAC, 12 kW Bradford White 671632851300
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 240 VAC, 15 kW Bradford White 671632851324
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 240 VAC, 24 kW Bradford White 671632851348
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 208 VAC, 9 kW Bradford White 671632851416
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 208 VAC, 12 kW Bradford White 671632851423
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 208 VAC, 15 kW Bradford White 671632851447
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 208 VAC, 18 kW Bradford White 671632833139
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 208 VAC, 24 kW Bradford White 671632851454
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 208 VAC, 36 kW Bradford White 671632851485
Application: For SVC Applications, Suitable For Use With: ElectriFLEX HD CEHD Series Immersion Thermostat Commercial Electric Water Heater, Specifications: 208 VAC, 54 kW Bradford White 671632849666
Voltage Rating: 240, Suitable For Use With: Residential Electric Water Heater Bradford White 671632795734
Voltage Rating: 208, Wattage: 3500, Material: Incoloy 240V/4500W-208V/3500W INCOLOY (SVC) Bradford White 671632849796
Voltage Rating: 240, Wattage: 4500, Overall Length: 10-7/8, Watt Density: Very, Material: Copper For use with residential upright/lowboy water heater, For 14 in diameter tanks and above, 103 w/sq-in Bradford White 671632813896
Mounting: Wall, Control Knob: Off, Pilot, Low, Hot to Very Hot, Size: 1, Status Light: 3-color LED Replaces 239-47463-01, Advanced control system for accurate water temperatures, Exclusive software for enhanced operational performance, Intelligent diagnostics to assist in troubleshooting, Pilot-on indication, simple 1,2,3 lighting instructions, Millivolt-powered control requires no external electicity, Integrated Piezo igniter, Universal replacement… service kits available to replace previous ICON valves, Proven technology for dependable performance Bradford White
Size: 2, Mounting: Wall, Status Light: 3-color LED, Control Knob: Off, Pilot, Low, Hot to Very Hot Advanced control system for accurate water temperatures, Exclusive software for enhanced operational performance, Intelligent diagnostics to assist in troubleshooting, Pilot-on indication, simple 1,2,3 lighting instructions, Millivolt-powered control requires no external electicity, Integrated Piezo igniter, Universal replacement… service kits available to replace previous ICON valves, Proven technology for dependable performance Bradford White
For LP Model RG250H, Honeywell RG275H, and Honeywell RG2100H Bradford White
Control Knob: Off, Pilot, Low, Hot to Very Hot, Mounting: Wall, Size: Light Duty, Status Light: 3-color LED Advanced control system for accurate water temperatures, Exclusive software for enhanced operational performance, Intelligent diagnostics to assist in troubleshooting, Pilot-on indication, simple 1,2,3 lighting instructions, Millivolt-powered control requires no external electicity, Integrated Piezo igniter, Universal replacement… service kits available to replace previous ICON valves, Proven technology for dependable performance, For use with LG75 75T80 Bradford White
Mfg Standards/Approvals: ASHRAE, CEC, cETLus Listed, CSA Certified, NSF Approved, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Year Limited Tank and 1 Year Limited on Component Parts, Tank Capacity: 119, Water Connection: 1-1/2, Temperature Rating: 1600, Type: Heavy Duty, Series: ElectriFLEX HD CEHD, Electrical Rating: 208/240/277/380/415/480/600 V, Power Rating: 54 kW, Phase: 1/3, Heating Element: Magnesium Anode Rod, Recovery Rate: 248 gph at 90 deg F, Material: Steel, Finish: Vitraglas, Dimensions: 30-1/4 Inch Dia x 66-3/4 Inch H, Domestic/Import: Domestic ElectriFLEX Series field convertible commercial electric water heaters provide an incredible level of flexibility, Immersion thermostats - immersion type for accurate temperature control from up to 180 deg F (82 deg C) with manual reset high limit control, Conversion kits - design certified by ETL for field conversion, conversion kits are available to convert any one model to a variety of voltages, kW inputs and phase, 3 Inch (76mm) non-CFC foam insulation - covers the sides and top of tank, reducing the amount of heat loss which results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - cold water inlet sediment reducing device helps prevent sediment build up in the tank, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Water connections - factory installed true dielectric fittings extend water heater life and eases installation, Elements - screw in style low watt density incoloy sheathed elements standard, these elements resist burnout caused by dry fire or lime buildup, Two magnesium anode rods - provide added protection against corrosion for long trouble free service, Hand hole cleanout - allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - durable tamper proof design, Completely pre-wired - with pressure lug terminal block eliminating need for splicing or taping of wires, Internal fusing - standard on all models Bradford White
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 193.9, Energy Efficiency: 82, Water Connection: 1-1/2, Temperature Rating: 180, Series: D-100L-199-3N, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater Bradford White 671632688098
Nominal Liter Capacity: 379, kW Input: 58.6, LP kW Input: 58.6, Floor to Vent Connection: 1980, Jacket Diameter: 768, Vent Size: 152, Floor to T&P Connection: 1535, Floor to Gas Connection: 221, Floor to Top of Heater: 1751, Floor to Top Water Connection: 2057, Floor to Hot Water Connection: 1635, Floor to Cold Water Connection: 695, Depth: 876, Water Connection NPT: 38 (T&F), Gas Connection Size: 19 ICON HD™—Intelligent proven design combines temperature control, diagnostic codes, and system ignition functions into a single control board with a digital LCD display, Control panel cover tilts down for ease of wiring and service, Operation Mode—Two different digitally displayed operation modes have the capability of adjusting the temperature setting up to 180°F (82°C), and adjusting the degree setting (ºF to ºC, or ºC to ºF), Service Mode—Eight different digitally displayed service modes can be easily cycled through by pressing the select button, Electronic Ignition—High voltage, low current electricity is sent to the pilot electrode initiating a spark to ignite the pilot gas, Automatic Flue Damper—Reduces stand-by loss, saving gas consumption and improving overall efficiency, Factory Installed Hydrojet® Sediment Reduction System—Cold water inlet sediment reducing device helps prevent sediment build up in the tank, Vitraglas Lining—An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation System—Non-CFC foam covers the sides and top of the tank, reducing heat loss, Water Connections—1-12" (38mm) NPT factory-installed true dielectric fittings extend water heater life and simplify water line connections, Hand Hole Cleanout—Allows inspection of tank interior and facilitates the removal of sediment deposits, E.C.O.—An automatic reset Energy Cut Out (E.C.O.) shuts off all gas in event of an overheat condition, Protective Magnesium Anode Rods—Provide added protection against corrosion for long-term, trouble-free service, Sanitizing Capability—Temperature setting up to 180°F (82°C), Termal Efficiency 82% Bradford White
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), Low NOx Compliance, North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 193.9, Energy Efficiency: 82, Water Connection: 1-1/2, Temperature Rating: 180, Series: D-100L-199-E3N, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater Bradford White 671632688210
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 606, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve Bradford White 671632257553
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, ASME HLW, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Vent Size: 6, Recovery Rate: 242.4, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 75 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater, ASME construction Bradford White 671632257850
Country of Origin: US, Package Length: 35.5, Package Height: 82.0, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 300000, Gas Connection: 3/4, Tank Capacity: 75, Vent Size: 7, Recovery Rate: 727, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 74-3/4 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve Bradford White 671632262724
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 399999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 8, Recovery Rate: 387.9, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 71-1/2 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater Bradford White 671632263325
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, ASME Standard, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 399999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 8, Recovery Rate: 970, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 72-1/2 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve, ASME construction Bradford White 671632262823
Country of Origin: US, Package Length: 37.5, Package Height: 78.625, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, ASME HLW, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 505000, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 10, Recovery Rate: 489.7, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.5 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 30-1/4 in Dia x 69 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper lowboy gas water heater, ASME construction Bradford White 671632265633
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 193.9, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.7 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper gas water heater Bradford White 671632081899
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 485, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve, 485 gph recovery at 40 deg F rise, 194 gph recovery at 100 deg F rise, 139 gph recovery at 140 deg F rise Bradford White 671632081905
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, North Carolina Code Compliant, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 485, Water Connection: 1-1/2, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Electronic, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Electronic ignition, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Insulation system, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Protective magnesium anode rod, Sanitizing capability, Low restrictive brass drain valve, 485 gph recovery at 40 deg F rise, 194 gph recovery at 100 deg F rise, 139 gph recovery at 140 deg F rise Bradford White 671632285969
Country of Origin: US, Package Length: 35.5, Package Height: 77.125, Package Width: 30.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), North Carolina Code Compliant, NSF 372, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 80, Vent Size: 6, Recovery Rate: 242.4, Water Connection: 1-1/2, Temperature Rating: 180, Fuel Type: Natural, Ignition Type: Electronic, Pressure Rating: 4.7 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 28-1/4 in Dia x 71-7/8 in H, Domestic/Import: Domestic ICON HD, Operation mode, Service mode, Automatic flue damper, Factory installed Hydrojet sediment reduction system, Vitraglas lining, Non-CFC foam insulation, Water connections, Hand hole cleanout, An automatic re-set Energy Cut Off (E.C.O) shuts off all gas in event of an overheat condition, Magnesium anode rod, Sanitizing capability, Brass drain valve, Flue damper gas water heater Bradford White 671632262984
Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), HUD Certified, NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 or 10 Years Limited Tank and Component Parts, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 20 in D x 59-1/8 in H, Domestic/Import: Domestic Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapor burn inside of the combustion chamber or restricted air flow, Piezo igniter - Easy and quick lighting of the pilot burner by push button, Pedestal base - Rugged and durable base allows easy transport and positioning, while providing corrosion-resistant contact with floor, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Housing and urban development - This water heater is designed in accordance with H.U.D. and is certified for installation in a manufactured home (mobile home) only, Must order roof jack kit for new installations, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Fully automatic controls - Automatic temperature selection at your fingertips, Built-in energy cut-off switch prevents abnormally high water temperature for extra safety, built-in gas pressure regulation, Convertible gas control - Easily convertible control for use with either propane or natural gas, Insulation system - 2 in Non-CFC foam insulation covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies, and jacket rigidity, Water connections -3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Heat traps - Installed on hot water outlet to minimize heat loss through piping, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble-free service, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, Flue baffle - Maximizes the amount of heat absorbed by the tank and reduces heat loss during standby periods, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632794690
Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Side Temperature and Pressure Relief Valve, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0064, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803125
Country of Origin: US, Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), HUD Certified, NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Pressure Rating: 10 in WC, Ultra Low NOx: No, Material: Steel, Dimensions: 22 in D x 59-3/8 in H, Domestic/Import: Domestic Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Pedestal base, Maintenance free, Sight window, Roof jack kit, Vitraglas lining, Fully automatic controls, Convertible gas control, 2 in non-CFC foam insulation, Water connections, Heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Flue baffle, Low restriction brass drain valve, Home atmospheric vent gas water heater Bradford White 671632794706
Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), Energy Saver Certified, NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 or 10 Years Limited Tank Warranties/6 Years Limited on Component Parts, Heating Capacity: 85000, Gas Connection: 1/2, Tank Capacity: 100, Vent Size: 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Atmospheric, Recovery Rate: 92 gph at 90 deg F, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 28-1/4 in Dia x 68-11/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent Diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Factory installed Hydrojet 2 total performance system - Cold water inlet sediment reducing device helps prevent sediment build up in tank and increases first hour delivery of hot water, Vitraglas lining - Bradford White tanks are lined with an exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Side connections - 3/4 in NPT tapping's that allow easy connections for space heating applications (potable water only), Non-CFC foam insulation - Covers the sides and top of tank, reducing the amount of heat loss, this results in less energy consumption, improved operation efficiencies and jacket rigidity [M-I-75 has 1-1 /4 in and M-I-100T has 2 in, 75 gal pedestal base, Water connections - Factory installed true dielectric fittings extend water heater life and ease installation (M-I-75S has 1 in NPT and M-I-100T has 1-1/4" in NPT), Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Protective magnesium anode rod, 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White
Package Length: 16.375, Package Height: 57.125, Package Width: 20.875, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 27000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 29 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 19-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632824748
Package Length: 16.375, Package Height: 57.125, Package Width: 20.875, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 27000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 29 gph at 90 deg F, Energy Efficiency: 0.0063, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 19-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, WR controls Bradford White 671632854202
Package Length: 20.75, Package Height: 59.0, Package Width: 18.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 61-1/2 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632819010
Package Length: 20.75, Package Height: 59.0, Package Width: 18.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 61-1/2 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632824489
Package Length: 20.75, Package Height: 59.0, Package Width: 18.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 61-1/2 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, WR controls Bradford White 671632854219
Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632818907
Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632824496
Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 34000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 37 gph at 90 deg F, Energy Efficiency: 0.00006, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, WR controls Bradford White 671632850143
Package Length: 25.4375, Package Height: 57.25, Package Width: 20.625, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Pressure Rating: 150, Series: TTW, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0066, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 49 in D x 57-5/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632791897
Package Length: 25.4375, Package Height: 57.25, Package Width: 20.625, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 38000, Gas Connection: 1/2, Tank Capacity: 40, Pressure Rating: 150, Series: TTW, Fuel Type: Liquid Propane, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 41 gph at 90 deg F, Energy Efficiency: 0.0066, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 24-3/4 in D x 57-5/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632796182
Package Length: 27.0, Package Height: 58.0, Package Width: 22.125, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 50, Pressure Rating: 150, Series: TTW, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0065, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-3/4 in D x 58-1/4 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632794836
Package Length: 27.0, Package Height: 58.0, Package Width: 22.125, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 38000, Gas Connection: 1/2, Tank Capacity: 50, Pressure Rating: 150, Series: TTW, Fuel Type: Liquid Propane, Ignition Type: Pilot, Vent Type: Power, Vent Size: 2 in, 3 in, Recovery Rate: 41 gph at 90 deg F, Energy Efficiency: 0.0065, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-3/4 in D x 58-1/4 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632796199
Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 34 gph at 90 deg F, Energy Efficiency: 0.0064, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803125
Country of Origin: US, Package Length: 18.875, Package Height: 58.5, Package Width: 21.25, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 6 Years Limited Tank and Component Parts, Heating Capacity: 32000, Gas Connection: 1/2, Tank Capacity: 30, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Liquid Propane, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 33 gph at 90 deg F, Energy Efficiency: 0.0064, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 21-1/2 in D x 59-15/16 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with proven millivolt powered technology and built-in piezo igniter, a standard off the shelf thermopile converts heat energy from the pilot flame into electrical energy, Enhanced performance - Proprietary algorithms provide enhanced first hour rating and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green LED light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green LED provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Resettable thermal switch - Proven and reliable bimetallic switch prevents burner and pilot operation in case of ongoing flammable vapors burning inside of the combustion chamber or restricted air flow, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter - Allows either 3 or 4 in vent connections with inputs of 40000 Btu/hr or less, over 40000 Btu/hr has the 4 in "Snap Lock" draft diverter, Low restriction brass drain valve - Durable tamper proof design Bradford White 671632794621
Country of Origin: US, Package Length: 23.9375, Package Height: 49.25, Package Width: 22.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 25-1/2 in D x 51-3/4 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803149
Country of Origin: US, Package Length: 22.375, Package Height: 57.75, Package Width: 20.375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 23-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803163
Country of Origin: US, Package Length: 22.875, Package Height: 58.875, Package Width: 24.4375, Mfg Standards/Approvals: ANSI Z21.10.1, AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, Application: Residential Applications, Includes: TOP Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Piezo, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.000062, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 25-1/2 in D x 60-5/16 in H, Domestic/Import: Domestic Bradford White ICON System, Enhanced performance, Advanced temperature control system, Intelligent diagnostics, Pilot on indication, Separate immersed thermowell, Advanced ScreenLok technology flame arrestor design, Resettable thermal switch, Maintenance free, Sight window, Factory installed Hydrojet sediment reduction system and FVIR defender safety system, Vitraglas lining, Non-CFC foam insulation, Pedestal base, Water connections, Factory installed heat traps, Protective magnesium anode rod, 3 x 4 in snap lock draft diverter, Low restriction brass drain valve, Atmospheric vent gas water heater Bradford White 671632803248
Country of Origin: US, Package Length: 22.625, Package Height: 57.25, Package Width: 27.5, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372, Application: Residential Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 38000, Gas Connection: 1/2, Tank Capacity: 40, Vent Size: 3 x 4, Pressure Rating: 150, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Atmospheric, Recovery Rate: 41 gph at 90 deg F, Energy Efficiency: 0.0067, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-1/8 in D x 54-1/2 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Automatic flue damper - Reduces stand-by heat loss, resulting in less gas consumption, higher energy factor ratings, and improved overall efficiency, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter, Low restrictive brass drain valve - Durable tamper proof design Bradford White 671632790258
Country of Origin: US, Package Length: 27.0, Package Height: 66.8125, Package Width: 22.0125, Mfg Standards/Approvals: AHRI Certified, ANSI Z21.10.1, ASHRAE 90.1b, CEC Listed, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), NAECA Compliant, NSF 372, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Top Temperature and Pressure Relief Valve, Heating Capacity: 40000, Gas Connection: 1/2, Tank Capacity: 50, Vent Size: 3 x 4, Pressure Rating: 4, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Atmospheric, Recovery Rate: 43 gph at 90 deg F, Energy Efficiency: 0.0067, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-1/8 in D x 63-1/2 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Pilot on indication - Flashing green led provides positive indication that pilot is on, Separate immersed thermowell - High strength advanced polymer composite thermowell provides isolation between electric temperature sensor and surrounding water, no need to drain the tank when removing gas valve, Automatic flue damper - Reduces stand-by heat loss, resulting in less gas consumption, higher energy factor ratings, and improved overall efficiency, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Pedestal base, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod, 3 x 4 in "Snap Lock" draft diverter, Low restrictive brass drain valve - Durable tamper proof design Bradford White 671632790272
Country of Origin: US, Package Length: 27.0, Package Height: 66.8125, Package Width: 22.0125, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CSA LLC - Low Lead Compliant Certified, CSA International (Formerly AGA/CGA), ENERGY STAR Qualified, Application: Residential Applications, Includes: 10 ft 120 VAC Power Cord, Temperature and Pressure Relief Valve, Heating Capacity: 65000, Gas Connection: 1/2, Tank Capacity: 48, Pressure Rating: 150, Series: TTW, Fuel Type: Natural, Ignition Type: Pilot, Vent Type: Power, Vent Size: 3 in, 4 in, Recovery Rate: 70 gph at 90 deg F, Energy Efficiency: 0.007, Water Connection: 3/4 in NPT, Ultra Low NOx: No, Dimensions: 26-3/4 in D x 66-1/8 in H, Domestic/Import: Domestic Bradford White ICON System - Intelligent gas control with spark to pilot ignition system eliminates the constant burning pilot, this results in savings of pilot gas during stand-by periods (120 VAC), Enhanced performance - Proprietary algorithms provide enhanced first hour delivery ratings and tighter temperature differentials, Advanced temperature control system - Microprocessor constantly monitors and controls burner operation to maintain consistent and accurate water temperature levels, Intelligent diagnostics - An exclusive green led light prompts the installer during start-up and provides ten different diagnostic codes to assist in troubleshooting, Power vent water heater - Designed for installations where atmospheric units cannot be used, exhaust gases are vented under positive pressure directly out of the building through the roof or the wall, Powerful blower motor - Our significantly quiet design has greater resistance to outside winds and the power to vent in many difficult venting situations, Horizontal and vertical venting - PVC, ABS or CPVC, Advanced ScreenLok technology flame arrestor design - Flame arrestor is designed to prevent ignition of flammable vapor outside of the water heater, Flammable vapor sensor - Electronic sensor prevents burner operation if flammable vapors are detected, the sensor will also prevent operation if there is ongoing flammable vapors burn inside the combustion chamber, Maintenance free - No regular cleaning of air inlet openings or flame arrestor is required under normal conditions, Sight window - Offers a view into the combustion chamber to observe the operation of the pilot and burner, Factory installed Hydrojet total performance system - Sediment reducing device that also increases first hour delivery of hot water while minimizing temperature build up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Insulation system - Non-CFC foam covers the sides and top of the tank, reducing heat loss, this results in less energy consumption, improved efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Low restriction brass drain valve - Durable tamper proof design, Protective magnesium rod Bradford White 671632792573
Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 199999, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 597, Energy Efficiency: 98.5, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, Ultra high efficiency Bradford White
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), EnergyStar Certified, NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 293.9, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-100T-250E-3N eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater Bradford White 671632331802
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, ASME Standard, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 250000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 735, Energy Efficiency: 97, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, Ultra high efficiency, ASME construction Bradford White 671632332083
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 300000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 334.5, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-100T-300E-3N eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater Bradford White 671632331826
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, ASME HLW, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 300000, Gas Connection: 3/4, Tank Capacity: 100, Recovery Rate: 334.5, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-100T-300E-3NA eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater, ASME construction Bradford White 671632529377
Country of Origin: US, Package Length: 35.0, Package Height: 86.5, Package Width: 32.25, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, ASME Standard, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 399999, Gas Connection: 1, Tank Capacity: 100, Recovery Rate: 1127, Energy Efficiency: 94, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 77-5/8 in H, Domestic/Import: Domestic Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, Ultra high efficiency, ASME construction Bradford White 671632631834
Country of Origin: US, Mfg Standards/Approvals: ANSI Z-21.10.3, AHRI Certified, ASME HLW Standard, ASHRAE 90.1b, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), CEC Listed, NSF Approved, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Warranty: 3 or 5 Years Limited Tank Warranties/1 Year Limited on Component Parts, Heating Capacity: 125000, Gas Connection: 3/4, Tank Capacity: 60, Recovery Rate: 364, Energy Efficiency: 96, Water Connection: 1-1/2, Pressure Rating: 150, Series: eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 57 in H Thermal efficiency up to 99.1%, ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restrictive brass drain valve, 364 gph recovery at 40 deg F rise, 145 gph recovery at 100 deg F rise, 104 gph recovery at 140 deg F rise, Ultra high efficiency Bradford White
Country of Origin: US, Package Length: 35.0, Package Height: 65.5, Package Width: 32.25, Mfg Standards/Approvals: AHRI Certified, ANSI Z-21.10.3, ASHRAE 90.1b, CEC Listed, CSA LLC-Low Lead Content, CSA International (Formerly AGA/CGA), NSF 372, Ultra Low NOx Compliance, Application: Commercial Applications, Includes: Temperature and Pressure Relief Valve, Heating Capacity: 150000, Gas Connection: 3/4, Tank Capacity: 60, Recovery Rate: 169.1, Energy Efficiency: 99.1, Water Connection: 1-1/2, Temperature Rating: 180, Series: EF-60T-150E-3N eF Series, Fuel Type: Natural, Ignition Type: Direct Spark, Pressure Rating: -0.05 in WC, Ultra Low NOx: Yes, Material: Steel, Dimensions: 28-1/4 in Dia x 57 in H, Domestic/Import: Domestic ICON HD, Factory installed Hydrojet sediment reduction system, Direct spark ignition, Operation mode, Service mode, Premix power burner, Flexible venting, Ultra quiet operation, A single exhaust pressure switch, 1 in NPT side connections for space heating, Sanitizing capability, Complies with the latest ultra low NOx requirement (14 ng/J NOx limit), Low restriction brass drain valve, Vitraglas lining, Ultra high efficiency gas water heater Bradford White 671632318759
Country of Origin: US, Mfg Standards/Approvals: ASHRAE 90.1b, ASME HLW, CEC Listed, cETLus Listed, CSA Certified, NSF 372, UL 1453, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Tank Capacity: 119, Voltage Rating: 208, Power Rating: 24000, Pressure Rating: 150, Temperature Rating: 180, Type: Heavy Duty, Series: CEHD120 (kW)3*CF, Water Connection: 1-1/2 in NPT, Recovery Rate: 248 gph at 40 deg F Rise, ASME Yes/No: Yes, Material: Steel, Dimensions: 30-1/4 in Dia x 66-3/4 in H Immersion thermostat - Designed to provide outlet water at a thermostatically controlled temperature greater than 180 deg F, 3 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Water connection - 1-1/2 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Screw-in style low watt density Incoloy sheathed elements standard, Elements resist burnout caused by dry fire or lime buildup, Two protective magnesium anode rods - Provide added protection against corrosion for long trouble free service, Hand hole cleanout - Allows inspection of tank interior and facilitates the removal of sediment deposits, Low restriction brass drain valve - Durable tamper proof design, Completely pre-wired with pressure lug terminal block eliminating need for splicing or taping of wires, Internal fusing - Standard on all models, Heavy duty field convertible electric water heater Bradford White
Country of Origin: US, Package Length: 30.125, Package Height: 67.5625, Package Width: 28.875, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 119, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE2120T3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 28 in Dia x 64-1/4 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632813827
Country of Origin: US, Package Length: 22.375, Package Height: 51.5, Package Width: 22.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 50, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE250S3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Short, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 47-1/2 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632819393
Country of Origin: US, Package Length: 22.375, Package Height: 64.125, Package Width: 22.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 65, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE265T3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 22 in Dia x 60-1/4 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632826698
Country of Origin: US, Package Length: 24.375, Package Height: 64.125, Package Width: 24.375, Mfg Standards/Approvals: AHRI Certified, ASHRAE 90.1b, CEC Listed, CSA Certified, CSAE Certified, cETLus Listed, Application: Commercial, Includes: Temperature and Pressure Relief Valve, Warranty: 3 Years Limited Tank/1 Year Limited Parts, Tank Capacity: 80, Voltage Rating: 208/240, Phase: 3, Pressure Rating: 150, Type: Light Duty Upright, Series: LE280T3-3, Power Rating: 4000 W at 208 VAC/5500 W at 240 VAC, Water Connection: 3/4 in NPT, Heating Element: Screw-In Copper, Recovery Rate: 18 gph at 100 deg F Rise, Tall or Short: Tall, ASME Yes/No: No, Material: Steel, Dimensions: 24 in Dia x 59-1/4 in H, Domestic/Import: Domestic Fully automatic thermostat control - Fast acting surface-mount thermostat with high limit energy cut-off (manual reset) for safety, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water, Factory installed Hydrojet sediment reduction system - Sediment reducing device that also increases first hour rating of hot water while minimizing temperature build-up in tank, Vitraglas lining - An exclusively engineered enamel formula that provides superior tank protection from the highly corrosive effects of hot water, Vitraglas is fused to the steel surface by firing at a temperature of over 1600 deg F, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, Results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connection - 3/4 in NPT factory installed true dielectric fittings extend water heater life and eases installation, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium rod - Provides added protection against corrosion for long trouble free service, Steel tank - Heavy gauge steel automatically formed, rolled and welded, Field convertible - Units are shipped from factory standard 3 ph, non-simultaneous and can be converted to 1 ph and/or simultaneous operation in the field, Copper screw type immersion element Bradford White 671632817993
Country of Origin: US, Mfg Standards/Approvals: AHRI Certified, cULus Listed, ENERGY STAR Certified, NAECA, NSF/ANSI 372, UL Listed, Application: Residential Indoor Basement, Garage, Closet, Utility Room, Attic, Warranty: 10 Years Limited Tank and Component Parts, Tank Capacity: 50, Voltage Rating: 208/240, Amperage Rating: 30, Phase: 1, Water Connection: 3/4, Pressure Rating: 150, Temperature Rating: 35 to 120, Type: Electric Mode, Series: AeroTherm, Power Rating: 3500 W at 208 VAC/4500 W at 240 VAC, Mounting Type: Floor, Recovery Rate: 21 gph at 90 deg F Rise, ASME Yes/No: No, Material: Steel, Dimensions: 21-3/4 in Dia x 60-3/4 in H, Domestic/Import: Domestic The AeroTherm series control panel - Provides detailed diagnostic information including water heater fault codes, tank codes, need-to-assess codes and heat pump codes, Additional functions allow you to monitor the status of temperature sensing thermistors and heating components, User-friendly, easy to read display, LEDs clearly indicate the current operating mode, Display communicates current status, mode and set point and displays error messages when applicable, Electric mode - Operates like a standard electric water heater and eliminates the air flow and sound from the heat pump system when preferred (fastest recovery time, but least energy efficient), Quiet operation - Operating sound level of approximately 55 dBA, Can be laid down for easier transportation - Easy-to-open, protective packaging, Easily accessible top mounted washable air filter - User is automatically alerted when the air filter needs to be cleaned, Direct heat transfer with immersed element - Transfers heat directly and efficiently to the water screw-in style, Insulation system - 2 in non-CFC foam insulation - Covers the sides and top of the tank, reducing the amount of heat loss, This results in less energy consumption, improved operation efficiencies and jacket rigidity, Water connections - 3/4 in NPT factory installed true dielectric fittings extend water heater life and simplify water line connections, Factory installed heat traps - Design incorporates a flexible disk that reduces heat loss in piping and eliminates the potential for noise generation, Protective magnesium anode rod - Provides added protection against corrosion for long-term, trouble free service, Installed temperature and pressure relief valve, Low restrictive brass drain valve - Durable tamper proof design Bradford White 671632797233
Suitable For Use With: Hydrojet Total Performance System Water Heater, Specifications: 3/4 in NPT, 2-1/2 in Nipple, Material: Cross Linked Polyethylene, Dimensions: 43 in L Bradford White 671632826995