Adhesives & Sealants Categories

Loading ...

Loading ...

Search in: Adhesives & Sealants Category

Country of Origin: US, Package Length: 2.5, Package Height: 8, Package Width: 2.5, Package Weight: 1.08, Container Type: Can, Container Size: 12 oz, Form: Aerosol, Color: Amber, Odor/Scent: Light/Petroleum Like, Flash Point: -155 deg F, VOC Content: 155 g/l, Flammability Rating: 4 -44 deg F boiling points, Yields 275 ft, 3/8 in bead DiversiTech Corp 95247094950
Country of Origin: US, Package Length: 12.25, Package Height: 12.25, Package Width: 8.5, Container Type: Cartridge, Container Size: 11 oz, Composition: Tetrachloroethylene and Aromatic Hydrocarbons, Form: Paste, Color: Clear, Odor/Scent: Hydrocarbon, VOC Content: <4%, Flammability Rating: 2 Exception bonding and sealing caulk for interior and exterior applications involving seams, joints, ductwork, flashing and any similar use, Excellent adhesion to virtually any surface (metals, fiberglass, wood, concrete, brick and most plastics) even if moisture is present, Resealable, paintable and flexible, Will not crack, chip or peel, Specially formulated for the HVACR industry, TSCA Regulatory - All ingredients of this product are listed or are excluded from listing under the US Toxic Substances Control Act (TSCA) Chemical Substance Inventory DiversiTech Corp 9524180014
Package Weight: 0.4, Type: High Performance, Container Type: Can, Container Size: 4 oz, Net Weight: 0.4 lb, Composition: Petroleum Based Lubricating Oil, Kaolin, Talc, Magnesium Carbonate, Poly (p-Phenylenediamine Terephthalamide), Titanium Dioxide, Silica, Amorphous, Fumed, Form: Liquid Paste, Color: Blue, Odor/Scent: Odorless, Temperature Rating: -50 to 400 deg F, Flash Point: >212 deg F, VOC Content: 4 g/L, Viscosity Rating: 30000 cP, Flammability Rating: 1, Applicable Materials: Aluminum, Black Iron, Brass, Copper, Glass, Monel, Fiberglass, Polyethylene, Nylon Plastic, PVC, CPVC, ABS, Stainless Steel and Galvanized Steel Odorless formula is non-separating, non-flammable and non-hazardous, Seals plastic and metal pipes and fittings, Performs over a range from -50 deg Fahrenheit to 400 deg Fahrenheit, Safe for drinking water lines, Wipes clean from hands and tools and washes out of clothes, Resists hardening and cracks, Hydraulic resistant to 12000 psi, Withstands gas pressure to 26 psi, Grit-free, Screw cap can with brush Oatey 32628158047
Package Weight: 0.8, Type: High Performance, Container Type: Can, Container Size: 8 oz, Net Weight: 0.8 lb, Composition: Petroleum Based Lubricating Oil, Kaolin, Talc, Magnesium Carbonate, Poly (p-Phenylenediamine Terephthalamide), Titanium Dioxide, Silica, Amorphous, Fumed, Form: Liquid Paste, Color: Blue, Odor/Scent: Odorless, Temperature Rating: -50 to 400 deg F, Flash Point: >212 deg F, VOC Content: 4 g/L, Viscosity Rating: 30000 cP, Flammability Rating: 1, Applicable Materials: Aluminum, Black Iron, Brass, Copper, Glass, Monel, Fiberglass, Polyethylene, Nylon Plastic, PVC, CPVC, ABS, Stainless Steel and Galvanized Steel Odorless formula is non-separating, non-flammable and non-hazardous, Seals plastic and metal pipes and fittings, Performs over a range from -50 deg Fahrenheit to 400 deg Fahrenheit, Safe for drinking water lines, In lid applicator, Sets soft with no cure time required, Wipes clean from hands and tools and washes out of clothes, Resists hardening and cracks, Hydraulic resistant to 12000 psi, Withstands gas pressure to 26 psi, Grit-free, Screw cap can with brush Oatey 32628158061
Package Weight: 1.48, Type: High Performance, Container Type: Can, Container Size: 16 oz, Net Weight: 1.48 lb, Composition: Petroleum Based Lubricating Oil, Kaolin, Talc, Magnesium Carbonate, Poly (p-Phenylenediamine Terephthalamide), Titanium Dioxide, Silica, Amorphous, Fumed, Form: Liquid Paste, Color: Blue, Odor/Scent: Odorless, Temperature Rating: -50 to 400 deg F, Flash Point: >212 deg F, VOC Content: 4 g/L, Viscosity Rating: 30000 cP, Flammability Rating: 1, Applicable Materials: Aluminum, Black Iron, Brass, Copper, Glass, Monel, Fiberglass, Polyethylene, Nylon Plastic, PVC, CPVC, ABS, Stainless Steel and Galvanized Steel Odorless formula is non-separating, non-flammable and non-hazardous, Seals plastic and metal pipes and fittings, Performs over a range from -50 deg Fahrenheit to 400 deg Fahrenheit, Safe for drinking water lines, In lid applicator, Sets soft with no cure time required, Wipes clean from hands and tools and washes out of clothes, Resists hardening and cracks, Hydraulic resistant to 12000 psi, Withstands gas pressure to 26 psi, Grit-free, Screw cap can with brush Oatey 32628158085
Package Weight: 0.95, Type: Heavy Duty, Container Type: Can, Container Size: 0.5 pt, Net Weight: 0.95 lb, Composition: Petroleum Distillate, Solvent-Refined Heavy Paraffin, Talc, Polyfluoroethylene, Titanium Dioxide, Castor Oil, Oxidized, Soybean Lecithin, Silica, Amorphous, Fumed, Form: Solid, Color: White, Odor/Scent: Odorless, Temperature Rating: -200 to 550 deg F, Specific Gravity: 1.56, VOC Content: 6 g/L, Viscosity Rating: 20000 to 50000 cP, Applicable Materials: Aluminum, Black Iron, Brass, Copper, Glass, Monel, Natural Rubber, Plastic, PVC, ABS, CPVC, Stainless Steel and Synthetic Rubber (Butyl, Neoprene) Formula is non-flammable and contains no heavy metals or volatile solvents, Contains a unique system of fine grain PTFE particles specifically designed to fill cracks and tiny thread imperfections, Use on all metals and on PVC, ABS, and CPVC plastics, Safe for drinking water lines, Resists strong acids, alkalis and ketones, Withstands temperatures from -200 deg Fahrenheit to 500 deg Fahrenheit, Holds tight against expansion and contraction, Forms leak free joints that can be used immediately, Will not run or drip from joints, Soft set with no cure time required, Screw cap can with brush Oatey 32628156203
Country of Origin: UKN, Type: Professional, Container Type: Bucket, Container Size: 14 oz, Net Weight: 0.94 lb, Composition: Limestone, Polyester Plasticizer, Polyethylene, Propylene Glycol, Quaternary Ammonium Compounds Bis(Hydrogenated Tallow Alkyl)Dimethyl, Salts with Bentonite, Form: Solid, Color: Off-White, Odor/Scent: Slight, Specific Gravity: 1.8, Flash Point: >212 deg F, VOC Content: 87 g/L, Viscosity Rating: >500000 cP, Applicable Materials: Marble, Granite, Natural, Synthetic Stone Products, Cultured Marble, Plastic, (No ABS) Rubber, Fiberglass, Ceramic, Enameled, Wood, Concrete, Grout, Elastomeric Materials and All Plumbing Metal Non-staining polymer sealant, Permanently soft, malleable, and flexible, Unique, professional grade, Not for use on ABS Oatey 32628251717
Container Size: 1 gal, Form: Liquid, Color: Clear, Odor/Scent: Ether-like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC, Specific Gravity: 0.9 /- 0.02 Regular viscosity Oatey 83675030312
Container Size: 16 oz, Form: Liquid, Color: Clear, Odor/Scent: Ether-like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Specific Gravity: 0.9 /- 0.02 Regular viscosity Oatey 83675030336
Container Size: 8 oz, Form: Liquid, Color: Clear, Odor/Scent: Ether-like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Specific Gravity: 0.9 /- 0.02 Regular viscosity Oatey 83675030343
Container Size: 4 oz, Form: Liquid, Color: Clear, Odor/Scent: Ether-like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Specific Gravity: 0.9 /- 0.02 Regular viscosity Oatey 83675030350
Country of Origin: UKN, Container Size: 32 oz, Net Weight: 2.18 lb, Suitable For Use With: PVC and CPVC Pipe and Fitting, Form: Translucent Liquid, Color: Purple, Odor/Scent: Solvent, VOC Content: 505 g/L, Flash Point: 14 to 23 deg F, Composition: Acetone, Cyclohexanone, Furan, Tetrahydro, Methyl Ethyl Ketone, Specific Gravity: 0.84 Lo-VOC primer meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Removes surface dirt, grease and grime as well as softens the pipe surface to allow a fast, secure solvent weld, For use in areas where plumbing code calls for verification that a primer has been used, 6.97 /- 0.2 lbs/gallon density Oatey 38753307589
Package Weight: 0.35, Type: Medium Fast, Container Size: 4 oz, Container Type: Can, Net Weight: 0.35 lb, Form: Translucent Liquid, Color: Green, Odor/Scent: Solvent, VOC Content: 398 g/L, Flash Point: -4 deg F, Composition: Furan, Tetrahydro, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.93, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied green colored cement for use in joining ABS to PVC in non-pressure transition joints up to 6 in diameter, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, 600 psi (72 hr) lap shear strength, Minimum 100 cps at 73 deg F /- 2 deg F viscosity, 7.74 /- 0.2 lbs/gallon density, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753309002
Package Weight: 1.15, Type: Medium Fast, Container Size: 16 oz, Container Type: Can, Net Weight: 1.15 lb, Form: Translucent Liquid, Color: Green, Odor/Scent: Solvent, VOC Content: 398 g/L, Flash Point: -4 deg F, Composition: Furan, Tetrahydro, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.93, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied green colored cement for use in joining ABS to PVC in non-pressure transition joints up to 6 in diameter, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, 600 psi (72 hr) lap shear strength, Minimum 100 cps at 73 deg F /- 2 deg F viscosity, 7.74 /- 0.2 lbs/gallon density, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753309255
Type: Low VOC, Container Size: 32 oz, Container Type: Can, Form: Translucent Liquid, Color: Green, Odor/Scent: Solvent, VOC Content: 398 g/L, Flash Point: -4 deg F, Composition: Furan, Tetrahydro, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.92, Setting Time: 1 to 2 min, Curing Time: 2 hr 1 to 2 min at 70 to 90 deg F setting time, Recommended application temperature 40 to 110 deg F Oatey 38753309262
Country of Origin: UKN, Type: Medium, Container Size: 32 oz, Net Weight: 2.291 lb, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 484 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Specific Gravity: 0.93, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.74 /- 0.2 lbs/gallon density, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753310206
Package Weight: 8.7, Type: Medium, Container Size: 1 gal, Net Weight: 8.7 lb, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 484 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Acetone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Fumed Silica, Specific Gravity: 0.93, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied clear cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.74 /- 0.2 lbs/gallon density, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753310213
Package Weight: 2.3, Type: Heavy Duty, Container Size: 32 oz, Net Weight: 2.3 lb, Suitable For Use With: Hot and Cold Water System, Form: Translucent Liquid, Color: Gray, Odor/Scent: Solvent, VOC Content: 467 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.97, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Heavy-bodied gray cement for use on all schedules and classes CPVC pipe and fittings up to 12 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Approved for Corzan CPVC piping systems, Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength, Minimum 1600 cps at 73 deg F /- 2 deg F viscosity, 8.05 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753310374
Package Weight: 1.2, Type: Heavy Duty, Container Size: 16 oz, Container Type: Can, Net Weight: 1.2 lb, Form: Translucent Liquid, Color: Gray, Odor/Scent: Solvent, VOC Content: 463 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.96, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Heavy duty gray cement for use on all schedules and classes PVC pipe and fitting up to 12 in diameter with interference fit, up to 18 in for non-pressure, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Thick formula fills gaps in large diameter pipe and loose fitting joints, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 1600 cps at 73 deg F /- 2 deg F viscosity, 7.86 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753310954
Country of Origin: UKN, Type: Heavy Duty, Container Size: 32 oz, Container Type: Can, Net Weight: 2.25 lb, Form: Translucent Liquid, Color: Gray, Odor/Scent: Solvent, VOC Content: 463 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.96, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Heavy duty gray cement for use on all schedules and classes PVC pipe and fitting up to 12 in diameter with interference fit, up to 18 in for non-pressure, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Thick formula fills gaps in large diameter pipe and loose fitting joints, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 1600 cps at 73 deg F /- 2 deg F viscosity, 7.86 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753311050
Package Weight: 9.05, Type: Heavy Duty, Container Size: 1 gal, Container Type: Can, Net Weight: 9.05 lb, Form: Translucent Liquid, Color: Gray, Odor/Scent: Solvent, VOC Content: 463 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.96, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Heavy duty gray cement for use on all schedules and classes PVC pipe and fitting up to 12 in diameter with interference fit, up to 18 in for non-pressure, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Thick formula fills gaps in large diameter pipe and loose fitting joints, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 1600 cps at 73 deg F /- 2 deg F viscosity, 7.86 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting, Wide mouth can Oatey 38753311180
Package Weight: 2.25, Type: Medium, Container Size: 32 oz, Net Weight: 2.25 lb, Suitable For Use With: Hot and Cold Water System, Form: Translucent Liquid, Color: Orange, Odor/Scent: Solvent, VOC Content: 470 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Chlorinated, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied orange cement for use on all schedules and classes of CPVC pipe and fittings up to 6 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Approved for Corzan CPVC piping systems, Corzan is a registered trademark of the Lubrizol Corporation, Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.99 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753311319
Package Weight: 0.15, Capacity: 12 in Oatey 38753312767
Package Weight: 2.25, Type: Regular Advanced, Container Size: 32 oz, Net Weight: 2.25 lb, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 488 g/L, Flash Point: -4 deg F, Composition: Methyl Ethyl Ketone, Cyclohexanone, Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Specific Gravity: 0.9, Setting Time: 6 to 7 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Regular-bodied clear cement for use on PVC pipe and fittings up to 4 in for DWV SCH 40 and up to 2 in for SCH 80, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 90 cps at 73 deg F /- 2 deg F viscosity, 7.47 /- 0.2 lbs/gallon density, 6 to 7 min (30 to 50 deg F)/4 to 5 min (50 to 70 deg F)/1 to 3 min (70 to 90 deg F) setting Oatey 38753319285
Country of Origin: UKN, Type: Medium Hot, Container Size: 32 oz, Net Weight: 2.417 lb, Form: Translucent Liquid, Color: Blue, Odor/Scent: Solvent, VOC Content: 454 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, Specific Gravity: 0.92, Setting Time: 4 to 5 min, Curing Time: 30 min, Temperature Rating: 40 to 110 deg F Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Very fast setting ""Hot"" cement formulated for wet conditions and/or quick pressurization and fast installation, No primer needed on non-pressure DWV, where local codes permit, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753321639
Package Weight: 0.329, Type: Multi-Purpose, Container Type: Tube, Container Size: 4 oz, Net Weight: 0.329 lb, Composition: Bisphenol-A-(Epichlorhydrin), Epoxy Resin 2,4,6-Trisdimethylaminomethyl )Phenol, CrystalLine Silica Non-Respirable, Form: Solid, Color: White/Beige, Odor/Scent: Sulfurous, Temperature Rating: 95 deg F, Specific Gravity: 1.95, VOC Content: <0.1%, Applicable Materials: PVC, CPVC, ABS, Wood, Metal, Tensile Strength: 880 psi, Shear Strength: 766 psi Underwater Convenient multi-purpose sealing, patching and mending compound, Steel-filled material, mixes in your hand and hardens in minutes, May be drilled, tapped, filed, sanded, sealed and painted when hardened, Non-toxic material contains no solvents and will not shrink, 250 deg F dry/125 deg F wet resistance, 84 Shore D at 60 min cured hardness, 300 volts/mils dielectric strength, 28.1 dielectric constant, 12000 psi compressive strength, 7 psi at 15 in modulus of elasticity, 428 psi flexural strength, 1 min mixing time, 2 to 3 min working time, 88 psi dry tensile strength Oatey 38753312705
Country of Origin: UKN, Type: 1-Step, Container Size: 4 oz, Container Type: Can, Net Weight: 0.3 lb, Suitable For Use With: Hot and Cold Water System, Form: Translucent Liquid, Color: Yellow, Odor/Scent: Solvent, VOC Content: 470 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 1 or 6 hr, Temperature Rating: 0 to 110 deg F For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in diameter interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, May be used with out primer where local coders permit, FlowGuard gold is a registered trademark of the Lubrizol Corporation, Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.98 /- 0.2 lbs/gallon density, 1 hr Cold/6 hr hot water above 60 deg F curing, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753319100
Package Weight: 0.67, Type: 1-Step, Container Size: 8 oz, Container Type: Can, Net Weight: 0.67 lb, Suitable For Use With: Hot and Cold Water System, Form: Translucent Liquid, Color: Yellow, Odor/Scent: Solvent, VOC Content: 470 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 1 or 6 hr, Temperature Rating: 0 to 110 deg F For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in diameter interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, May be used with out primer where local coders permit, FlowGuard gold is a registered trademark of the Lubrizol Corporation, Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.98 /- 0.2 lbs/gallon density, 1 hr Cold/6 hr hot water above 60 deg F curing, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753319117
Package Weight: 1.229, Type: 1-Step, Container Size: 16 oz, Net Weight: 1.229 lb, Suitable For Use With: Hot and Cold Water System, Form: Translucent Liquid, Color: Yellow, Odor/Scent: Solvent, VOC Content: 470 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 1 or 6 hr, Temperature Rating: 0 to 110 deg F For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in diameter interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, May be used with out primer where local coders permit, FlowGuard gold is a registered trademark of the Lubrizol Corporation, Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.98 /- 0.2 lbs/gallon density, 1 hr Cold/6 hr hot water above 60 deg F curing, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753319124
Package Weight: 2.4, Type: 1-Step, Container Size: 32 oz, Net Weight: 2.4 lb, Suitable For Use With: Hot and Cold Water System, Form: Translucent Liquid, Color: Yellow, Odor/Scent: Solvent, VOC Content: 470 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Ethene, Chloro-, Homopolymer, Acetone, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 1 or 6 hr, Temperature Rating: 0 to 110 deg F For copper tube size (CTS) CPVC hot and cold potable water pipe and fittings up to 2 in diameter interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, May be used with out primer where local coders permit, FlowGuard gold is a registered trademark of the Lubrizol Corporation, Min 400 psi (2 hr at 73 deg F) hydrostatic burst strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.98 /- 0.2 lbs/gallon density, 1 hr Cold/6 hr hot water above 60 deg F curing, 4 to 5 min (30 to 50 deg F)/2 to 3 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753319131
Container Type: Can, Container Size: 4 fl-oz, Composition: Calcium Carbonate, Distillate (Petroleum), Hydrotreated Heavy Naphthenic, Polyfluoroethylene, Titanium Dioxide, CrystalLine Silica, Form: Liquid Paste, Drying Time: 4 hr, Color: White, Odor/Scent: Odorless, Specific Gravity: 1.5, Flash Point: >212 deg F, VOC Content: 3 g/L Withstands up to 3000 psi on gases from -50 to 400 deg F and 10000 psi on liquids from -50 to 500 deg F, For use with water, steam, caustics or dilute acid lines of PVC, CPVC, ABS, cycolac, polypropylene, iron, steel or copper, Lubricates and seals all threaded joints, White, non-hardening, non-separating, non-toxic paste, Can be used with plastic and metal threads, Approved for use on flowguard gold, blazemaster and corzan piping systems Oatey 38753312309
Package Weight: 0.85, Container Size: 8 oz, Net Weight: 0.85 lb, Composition: Calcium Carbonate, Distillate (Petroleum), Hydrotreated Heavy Naphthenic, Polyfluoroethylene, Titanium Dioxide, CrystalLine Silica (Quartz), Form: Liquid Paste, Color: White, Odor/Scent: Odorless, Specific Gravity: 1.7, Flash Point: >212 deg F, VOC Content: 3 g/L, Viscosity Rating: 25000 cP Lubricates and seals all threaded joints, White, non-hardening, non-separating, non-toxic paste, Withstands up to 3000 psi on gases from -50 to 400 deg F, and 10000 psi on liquids from -50 to 500 deg F, For use with water, steam, caustics or dilute acid lines of PVC, CPVC, ABS, cycolac, polypropylene, iron, steel or copper, Approved for use on FlowGuard Gold, Blazemaster and Corzan piping systems Oatey 38753312316
Package Weight: 1.73, Container Size: 16 oz, Net Weight: 1.73 lb, Composition: Calcium Carbonate, Distillate (Petroleum), Hydrotreated Heavy Naphthenic, Polyfluoroethylene, Titanium Dioxide, CrystalLine Silica (Quartz), Form: Liquid Paste, Color: White, Odor/Scent: Odorless, Specific Gravity: 1.7, Flash Point: >212 deg F, VOC Content: 3 g/L, Viscosity Rating: 25000 cP Lubricates and seals all threaded joints, White, non-hardening, non-separating, non-toxic paste, Withstands up to 3000 psi on gases from -50 to 400 deg F, and 10000 psi on liquids from -50 to 500 deg F, For use with water, steam, caustics or dilute acid lines of PVC, CPVC, ABS, cycolac, polypropylene, iron, steel or copper, Approved for use on FlowGuard Gold, Blazemaster and Corzan piping systems Oatey 38753312323
Package Weight: 1.15, Type: Medium Hot, Series: 2000, Container Size: 16 oz, Net Weight: 1.15 lb, Form: Liquid, Color: Blue, Odor/Scent: Ether Like, VOC Content: 510 g/L, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Methyl Ethyl Ketone, Silica, Amorphous, Fumed, CrystalLine-Free, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 30 min, Temperature Rating: 40 to 110 deg F Medium-bodied blue colored cement for use on all schedules and classes of flexible and rigid PVC pipe and fittings up to 6"" with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, No primer needed on non-pressure DWV, where local codes permit, Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675020467
Package Weight: 2.2, Type: Medium Hot, Series: 2000, Container Size: 32 oz, Net Weight: 2.2 lb, Form: Liquid, Color: Blue, Odor/Scent: Ether Like, VOC Content: 510 g/L, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Methyl Ethyl Ketone, Silica, Amorphous, Fumed, CrystalLine-Free, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 30 min, Temperature Rating: 40 to 110 deg F Medium-bodied blue colored cement for use on all schedules and classes of flexible and rigid PVC pipe and fittings up to 6"" with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, No primer needed on non-pressure DWV, where local codes permit, Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675020368
Package Weight: 0.375, Type: Medium Hot, Series: 2000, Container Size: 4 oz, Net Weight: 0.375 lb, Form: Liquid, Color: Blue, Odor/Scent: Ether Like, VOC Content: 510 g/L, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Methyl Ethyl Ketone, Silica, Amorphous, Fumed, CrystalLine-Free, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 30 min, Temperature Rating: 40 to 110 deg F Medium-bodied blue colored cement for use on all schedules and classes of flexible and rigid PVC pipe and fittings up to 6"" with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, No primer needed on non-pressure DWV, where local codes permit, Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675020665
Package Weight: 0.6, Type: Medium Hot, Series: 2000, Container Size: 8 oz, Net Weight: 0.6 lb, Form: Liquid, Color: Blue, Odor/Scent: Ether Like, VOC Content: 510 g/L, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Methyl Ethyl Ketone, Silica, Amorphous, Fumed, CrystalLine-Free, Specific Gravity: 0.94, Setting Time: 4 to 5 min, Curing Time: 30 min, Temperature Rating: 40 to 110 deg F Medium-bodied blue colored cement for use on all schedules and classes of flexible and rigid PVC pipe and fittings up to 6"" with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, No primer needed on non-pressure DWV, where local codes permit, Very fast setting cement formulated for wet conditions and/or quick pressurization and fast installation, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675020566
Country of Origin: UKN, Type: Medium, Container Size: 4 oz, Container Type: Can, Net Weight: 0.36 lb, Form: Translucent Liquid, Color: Blue, Odor/Scent: Solvent, VOC Content: 443 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, Specific Gravity: 0.92, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, LO-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Very fast setting ""Hot"" cement formulated for wet conditions and/or quick pressurization and fast installation, No primer needed on non-pressure DWV, up through 6 in diameter where local codes permit, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.83 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753308906
Country of Origin: UKN, Type: Medium, Container Size: 8 oz, Container Type: Can, Net Weight: 0.64 lb, Form: Translucent Liquid, Color: Blue, Odor/Scent: Solvent, VOC Content: 443 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, Specific Gravity: 0.92, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, LO-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Very fast setting ""Hot"" cement formulated for wet conditions and/or quick pressurization and fast installation, No primer needed on non-pressure DWV, up through 6 in diameter where local codes permit, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.83 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753308913
Country of Origin: UKN, Type: Medium, Container Size: 16 oz, Container Type: Can, Net Weight: 1.21 lb, Form: Translucent Liquid, Color: Blue, Odor/Scent: Solvent, VOC Content: 443 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, Specific Gravity: 0.92, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, LO-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Very fast setting ""Hot"" cement formulated for wet conditions and/or quick pressurization and fast installation, No primer needed on non-pressure DWV, up through 6 in diameter where local codes permit, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.83 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753308937
Country of Origin: UKN, Type: Medium, Container Size: 32 oz, Container Type: Can, Net Weight: 2.226 lb, Form: Translucent Liquid, Color: Blue, Odor/Scent: Solvent, VOC Content: 443 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, Specific Gravity: 0.92, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, LO-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Very fast setting ""Hot"" cement formulated for wet conditions and/or quick pressurization and fast installation, No primer needed on non-pressure DWV, up through 6 in diameter where local codes permit, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.83 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753308944
Package Weight: 8.85, Type: Medium, Container Size: 1 gal, Net Weight: 8.85 lb, Form: Translucent Liquid, Color: Blue, Odor/Scent: Solvent, VOC Content: 443 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Polyvinyl Chloride, Acetone, Cyclohexanone, Methyl Ethyl Ketone, Silica, Amorphous, Fumed, Specific Gravity: 0.92, Setting Time: 4 to 5 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Medium-bodied blue cement for use on all schedules and classes of PVC pipe and fittings up to 6 in diameter with interference fit, LO-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Very fast setting ""Hot"" cement formulated for wet conditions and/or quick pressurization and fast installation, No primer needed on non-pressure DWV, up through 6 in diameter where local codes permit, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 500 cps at 73 deg F /- 2 deg F viscosity, 7.83 /- 0.2 lbs/gallon density, 4 to 5 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 38753308951
Package Weight: 1.125, Type: Regular, Series: 6200, Container Size: 16 oz, Net Weight: 1.125 lb, Form: Liquid, Color: Clear, Odor/Scent: Ether Like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Specific Gravity: 0.9, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Regular-bodied clear cement for use on all schedules and classes of PVC, CPVC, ABS pipe and fittings up to 2 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Consult Oatey technical service before using, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 90 cps at 73 deg F /- 2 deg F viscosity, 7.79 /- 0.2 lbs/gallon density, Note: this product is not for use in a system using or being tested by compressed air or gases, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675062467
Package Weight: 2.167, Type: Regular, Series: 6200, Container Size: 32 oz, Net Weight: 2.167 lb, Form: Liquid, Color: Clear, Odor/Scent: Ether Like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Specific Gravity: 0.9, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Regular-bodied clear cement for use on all schedules and classes of PVC, CPVC, ABS pipe and fittings up to 2 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Consult Oatey technical service before using, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 90 cps at 73 deg F /- 2 deg F viscosity, 7.79 /- 0.2 lbs/gallon density, Note: this product is not for use in a system using or being tested by compressed air or gases, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675062368
Package Weight: 0.354, Type: Regular, Series: 6200, Container Size: 4 oz, Net Weight: 0.354 lb, Form: Liquid, Color: Clear, Odor/Scent: Ether Like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Specific Gravity: 0.9, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Regular-bodied clear cement for use on all schedules and classes of PVC, CPVC, ABS pipe and fittings up to 2 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Consult Oatey technical service before using, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 90 cps at 73 deg F /- 2 deg F viscosity, 7.79 /- 0.2 lbs/gallon density, Note: this product is not for use in a system using or being tested by compressed air or gases, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675062665
Package Weight: 0.667, Type: Regular, Series: 6200, Container Size: 8 oz, Net Weight: 0.667 lb, Form: Liquid, Color: Clear, Odor/Scent: Ether Like, VOC Content: 84 to 88%, Flash Point: 14 to 23 deg F, Composition: Tetrahydrofuran, Methyl Ethyl Ketone, Cyclohexanone, Acetone, PVC (Chloroethylene, Polymer), Specific Gravity: 0.9, Setting Time: 5 to 6 min, Curing Time: 2 hr, Temperature Rating: 40 to 110 deg F Regular-bodied clear cement for use on all schedules and classes of PVC, CPVC, ABS pipe and fittings up to 2 in diameter with interference fit, Lo-VOC solvent cement meets California South Coast air quality Management District (SCAQMD) 1168/316A or BAAQMD method 40 and various environmental requirements, Consult Oatey technical service before using, 250 psi (2 hr)/500 psi (16 hr)/900 psi (72 hr) lap shear strength, Minimum 90 cps at 73 deg F /- 2 deg F viscosity, 7.79 /- 0.2 lbs/gallon density, Note: this product is not for use in a system using or being tested by compressed air or gases, 5 to 6 min (30 to 50 deg F)/3 to 4 min (50 to 70 deg F)/1 to 2 min (70 to 90 deg F) setting Oatey 83675062566
Package Weight: 1.25, Container Type: Can, Container Size: 16 oz, Net Weight: 1.25 lb, Composition: Tetrahydrofuran, Acetone, Linear Saturated Polyester Resin, Form: Liquid, Color: Clear, Odor/Scent: Ether Like, Temperature Rating: 40 to 110 deg F, Specific Gravity: 0.9, Flash Point: 14 to 23 deg F, VOC Content: <510 g/L, Flammability Rating: 3 Formulated with a mixture of solvents and resins, Designed for use with PVC flexible-liner membranes, Not for use on PVC pipe and fittings, Do not use with chlorinated polyethylene (CPE) flexible-liner membrane, Medium body viscosity Oatey 38753308128
Package Length: 18, Package Height: 6, Package Width: 13, Package Weight: 34, Package Volume: 0.78, Type: Non-Setting, Container Type: Brush Top Can, Container Size: 1 qt, Form: Paste, Color: Blue, Odor/Scent: Slight, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.32, Flash Point: >300 deg F, VOC Content: 0 g/L, Flammability Rating: 1, Applicable Materials: Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Aluminum, Polyethylene, Reinforced Fiberglass, PVC, ABS, CPVC PTFE enriched, Allows immediate pressurization, For use with potable water (hot or cold), Non-setting and will not dry out in the can, Formulated for plastic and metal pipe, Smooth easy application, Non-flammable, Non-separating, Lubricates and protects threads, Lead free and contains no other metals, For pressure up to 10000 psi (liquids) and 2000 psi (gases), Multipurpose, 2 years minimum shelf life, Wt/gal at 77 deg F: 9.3 /- 0.5 lb/gal Rectorseal 21449313032
Package Length: 13.5, Package Height: 4.5, Package Width: 10, Package Weight: 19, Package Volume: 0.43, Type: Non-Setting, Container Type: Brush Top Can, Container Size: 1 pt, Form: Paste, Color: Blue, Odor/Scent: Slight, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.32, Flash Point: >300 deg F, VOC Content: 0 g/L, Flammability Rating: 1, Applicable Materials: Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Aluminum, Polyethylene, Reinforced Fiberglass, PVC, ABS, CPVC PTFE enriched, Allows immediate pressurization, For use with potable water (hot or cold), Non-setting and will not dry out in the can, Formulated for plastic and metal pipe, Smooth easy application, Non-flammable, Non-separating, Lubricates and protects threads, Lead free and contains no other metals, For pressure up to 10000 psi (liquids) and 2000 psi (gases), Multipurpose, 2 years minimum shelf life, Wt/gal at 77 deg F: 9.3 /- 0.5 lb/gal Rectorseal 21449314336
Package Height: 8, Package Volume: 0.76, Type: Non-Setting, Container Type: Can, Container Size: 0.5 pt, Net Weight: 21 lb, Base Type: Resinous, Form: Paste, Coverage: 0.76 cu-ft, Color: Blue, Odor/Scent: Slight, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.32, Flash Point: >300 deg F, Flammability Rating: 1, Applicable Materials: Metal, Plastic Pipe Low odor, Allows immediate pressurization, For use with potable water (hot or cold), Non-setting and will not dry out in the can, Formulated for plastic and metal pipe, Smooth easy application, Non-flammable, Non-separating, Lubricates and protects threads, Lead free and contains no other metals, For pressures up to 1, psi (liquids) and 2, psi (gases), Multipurpose Rectorseal 21449315531
Country of Origin: US, Package Length: 13.25, Package Height: 4.0625, Package Width: 9, Package Weight: 0.42, Package Volume: 0.23, Type: Non Setting, Container Type: Can, Container Size: 0.25 pt, Base Type: Resinous, Form: Paste, Color: Blue, Odor/Scent: Slight, Specific Gravity: 1.32, Flash Point: >300 deg F, VOC Content: 0 g/L, Flammability Rating: 1 PTFE enriched, non-flammable, Allows immediate pressurization, for pressures up to 10000 psi (liquids), Lead free and contains no other metals and not recommended for oxygen, Non-setting and will not dry out in the can, Formulated for plastic and metal pipe, for use with potable water (hot or cold), 2 years shelf life Rectorseal 214493163306
Country of Origin: US, Package Volume: 0.53, Type: Premium, Container Type: Can, Container Size: 1 pt, Base Type: Oleoresinous, Composition: Diacetone Alcohol, Form: Paste, Coverage: 0.53 cu-ft, Color: Yellow, Odor/Scent: Mild, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.38, Flash Point: 150 deg F, VOC Content: 317 g/L, Flammability Rating: 2, Applicable Materials: Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, Fiberglass Reinforced, PVC Pipe For use with potable water (hot or cold), Lead free and contains no other metals, Soft setting, slow drying, Brushable from 20 deg F to 140 deg F, Will not dry out in the can, Multipurpose wide range of service uses, Immediate pressurization on pipe up to 2 in and 100 psi, For pressure up to 12,000 psi (liquids) and 2,600 psi (gases), Smooth easy application, Permits easy break out with no damage to threads, Economical requires only a small amount, Reduces friction to allow tighter joint makeup, Lubricates and protects threads Rectorseal 21449254311
Country of Origin: US, Package Height: 8, Package Volume: 0.44, Type: Premium, Container Type: Can, Container Size: 0.5 pt, Base Type: Oleoresinous, Composition: Diacetone Alcohol, Form: Paste, Coverage: 0.44 cu-ft, Color: Yellow, Odor/Scent: Mild, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.38, Flash Point: 150 deg F, VOC Content: 317 g/L, Flammability Rating: 2, Applicable Materials: Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, Fiberglass Reinforced, PVC Pipe For use with potable water (hot or cold), Lead free and contains no other metals, Soft setting, slow drying, Brushable from 20 deg F to 140 deg F, Will not dry out in the can, Multipurpose wide range of service uses, Immediate pressurization on pipe up to 2 in and 100 psi, For pressure up to 12,000 psi (liquids) and 2,600 psi (gases), Smooth easy application, Permits easy break out with no damage to threads, Economical requires only a small amount, Reduces friction to allow tighter joint makeup, Lubricates and protects threads Rectorseal 21449255516
Country of Origin: US, Package Length: 8, Package Height: 10, Package Width: 8, Package Volume: 0.37, Type: Premium, Container Type: Can, Container Size: 0.5 pt, Base Type: Oleoresinous, Composition: Diacetone Alcohol, Form: Paste, Coverage: 0.37 cu-ft, Color: Yellow, Odor/Scent: Mild, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.38, Flash Point: 150 deg F, VOC Content: 317 g/L, Flammability Rating: 2, Applicable Materials: Steel, Iron, Brass, Copper, Aluminum, Stainless Steel, Polyethylene, Fiberglass Reinforced, PVC Pipe For use with potable water (hot or cold), Lead free and contains no other metals, Soft setting, slow drying, Brushable from 20 deg F to 140 deg F, Will not dry out in the can, Multipurpose wide range of service uses, Immediate pressurization on pipe up to 2 in and 100 psi, For pressure up to 12,000 psi (liquids) and 2,600 psi (gases), Smooth easy application, Permits easy break out with no damage to threads, Economical requires only a small amount, Reduces friction to allow tighter joint makeup, Lubricates and protects threads Rectorseal 21449256315
Country of Origin: US, Package Width: 10, Package Volume: 0.53, Container Type: Can, Container Size: 1 pt, Net Weight: 19 lb, Base Type: Resinous, Form: Paste, Coverage: 0.53 cu-ft, Color: White, Odor/Scent: Slight, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.32, Flash Point: >300 deg F, Flammability Rating: 1, Applicable Materials: Metal, Plastic Piping, Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Aluminum, Polyethylene, Reinforced Fiberglass, PVC, ABS and CPVC For pressures up to 1, psi (liquids) and 2, psi (gases), Non-staining and non-separating, Allows immediate pressurization, Lubricates and protects threads, For use with potable water (hot or cold), Low odor, Non-setting and will not dry out in the can, Lead free and contains no other metals, Formulated for plastic and metal pipe, Smooth easy application, Multipurpose, Non-flammable Rectorseal 21449234313
Country of Origin: US, Package Height: 8, Package Volume: 0.76, Container Type: Can, Container Size: 0.5 pt, Net Weight: 21 lb, Base Type: Resinous, Form: Paste, Coverage: 0.76 cu-ft, Color: White, Odor/Scent: Slight, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.32, Flash Point: >300 deg F, Flammability Rating: 1, Applicable Materials: Metal, Plastic Piping, Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Aluminum, Polyethylene, Reinforced Fiberglass, PVC, ABS and CPVC For pressures up to 1, psi (liquids) and 2, psi (gases), Non-staining and non-separating, Allows immediate pressurization, Lubricates and protects threads, For use with potable water (hot or cold), Low odor, Non-setting and will not dry out in the can, Lead free and contains no other metals, Formulated for plastic and metal pipe, Smooth easy application, Multipurpose, Non-flammable Rectorseal 21449235518
Country of Origin: US, Package Length: 14, Package Height: 4, Package Width: 7, Package Volume: 0.23, Container Type: Can, Container Size: 0.25 pt, Net Weight: 12 lb, Base Type: Resinous, Form: Paste, Coverage: 0.23 cu-ft, Color: White, Odor/Scent: Slight, Temperature Rating: -40 to 125 deg F, Specific Gravity: 1.32, Flash Point: >300 deg F, Flammability Rating: 1, Applicable Materials: Metal, Plastic Piping, Iron, Galvanized Steel, Stainless Steel, Brass, Copper, Aluminum, Polyethylene, Reinforced Fiberglass, PVC, ABS and CPVC For pressures up to 1, psi (liquids) and 2, psi (gases), Non-staining and non-separating, Allows immediate pressurization, Lubricates and protects threads, For use with potable water (hot or cold), Low odor, Non-setting and will not dry out in the can, Lead free and contains no other metals, Formulated for plastic and metal pipe, Smooth easy application, Multipurpose, Non-flammable Rectorseal 21449236317
Country of Origin: US, Type: Vibration Resistant, Series: Tru-Blu, Container Type: Can, Container Size: 8 oz, Curing Time: 24 hr, Color: Blue, Temperature Rating: -20 to 140 deg F, Specific Gravity: 1.38, Flash Point: 144 deg F, Viscosity Rating: 45000 cPs Rectorseal 21449315517
Type: Low VOC, Series: 1600, Container Size: 32 oz, Form: Opaque Liquid, Color: Gray, Odor/Scent: Solvent, VOC Content: 484 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, 2-Propanone, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Colloidal Silicon Dioxide, Specific Gravity: 0.93 /- 0.02 Medium viscosity, Recommended application temperature 40 to 110 deg F Oatey 83675016361
Type: Low VOC, Series: 2200, Container Size: 1 gal, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 488 g/L, Flash Point: -4 deg F, Composition: Methyl Ethyl Ketone, Cyclohexanone, Furan, Tetrahydro, Acetone, Polyvinyl Chloride Regular viscosity, Recommended application temperature 40 to 110 deg F Oatey 83675022249
Type: Low VOC, Series: 2200, Container Size: 16 oz, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 488 g/L, Flash Point: -4 deg F, Composition: Methyl Ethyl Ketone, Cyclohexanone, Furan, Tetrahydro, Acetone, Polyvinyl Chloride Regular viscosity, Sets up quickly, Recommended application temperature 40 to 110 deg F Oatey 83675022461
Type: Low VOC, Series: 2200, Container Size: 32 oz, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 488 g/L, Flash Point: -4 deg F, Composition: Methyl Ethyl Ketone, Cyclohexanone, Furan, Tetrahydro, Acetone, Polyvinyl Chloride Regular viscosity, Sets up quickly, Recommended application temperature 40 to 110 deg F Oatey 83675022362
Type: Low VOC, Series: 2200, Container Size: 4 oz, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 488 g/L, Flash Point: -4 deg F, Composition: Methyl Ethyl Ketone, Cyclohexanone, Furan, Tetrahydro, Acetone, Polyvinyl Chloride Regular viscosity, Sets up quickly, Recommended application temperature 40 to 110 deg F Oatey 83675022669
Type: Low VOC, Series: 2200, Container Size: 8 oz, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 488 g/L, Flash Point: -4 deg F, Composition: Methyl Ethyl Ketone, Cyclohexanone, Furan, Tetrahydro, Acetone, Polyvinyl Chloride Regular viscosity, Sets up quickly, Recommended application temperature 40 to 110 deg F Oatey 83675022560
Series: 8700, Container Size: 1 gal, Form: Liquid, Color: Purple, Odor/Scent: Solvent, VOC Content: 505 g/L, Flash Point: 14 to 23 deg F, Composition: Acetone, Furan, Cyclohexanone, Tetrahydro, Methyl Ethyl Ketone, Specific Gravity: 0.84 /- 0.02 Removes surface dirt, grease and grime, as well as softens the pipe surface to allow a fast, secure solvent weld, Note: This product is not for use in a system using or being tested by compressed air or gases, For PVC and CPVC pipe and fittings Oatey 83675087248
Series: 8700, Container Size: 1 pt, Form: Liquid, Color: Purple, Odor/Scent: Solvent, VOC Content: 505 g/L, Flash Point: 14 to 23 deg F, Composition: Acetone, Cyclohexanone, Furan, Tetrahydro, Methyl Ethyl Ketone, Specific Gravity: 0.84 /- 0.02 Removes surface dirt, grease and grime, as well as softens the pipe surface to allow a fast, secure solvent weld, Note: This product is not for use in a system using or being tested by compressed air or gases, For PVC and CPVC pipe and fittings Oatey 83675087460
Series: 8700, Container Size: 0.25 pt, Form: Liquid, Color: Purple, Odor/Scent: Solvent, VOC Content: 505 g/L, Flash Point: 14 to 23 deg F, Composition: Acetone, Cyclohexanone, Furan, Tetrahydro, Methyl Ethyl Ketone, Specific Gravity: 0.84 /- 0.02 Removes surface dirt, grease and grime, as well as softens the pipe surface to allow a fast, secure solvent weld, Note: This product is not for use in a system using or being tested by compressed air or gases, For PVC and CPVC pipe and fittings Oatey 83675087668
Series: 8700, Container Size: 0.5 pt, Form: Liquid, Color: Purple, Odor/Scent: Solvent, VOC Content: 505 g/L, Flash Point: 14 to 23 deg F, Composition: Acetone, Cyclohexanone, Furan, Tetrahydro, Methyl Ethyl Ketone, Specific Gravity: 0.84 /- 0.02 Removes surface dirt, grease and grime, as well as softens the pipe surface to allow a fast, secure solvent weld, Note: This product is not for use in a system using or being tested by compressed air or gases, For PVC and CPVC pipe and fittings Oatey 83675087569
Type: Low VOC, Series: 2600, Container Size: 32 oz, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 423 g/L, Flash Point: -4 deg F, Composition: Furan, Tetrahydro, Acetone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.95 /- 0.02 Formulated for fast initial set-up at temperatures down to -15 to 110 deg F, No primer needed on non-pressure DWV, where local codes permit, All weather Oatey 83675026360
Type: Low VOC, Series: 2600, Container Size: 8 oz, Form: Translucent Liquid, Color: Clear, Odor/Scent: Solvent, VOC Content: 423 g/L, Flash Point: -4 deg F, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed No primer needed on non-pressure DWV, where local codes permit, Formulated for fast initial set-up at temperatures down to -15 to 110 deg F, All weather Oatey 83675026568
Type: Heavy Duty Hot Low VOC, Container Size: 32 oz, Net Weight: 26 lb, Form: Liquid, Color: Clear, VOC Content: 510 g/L, Composition: Acetone, Amorphous Silica, Cyclohexanone, Methyl Ethyl Ketone, PVC Resin Tetrahydrofuran Very fast setting, Recommended application temperature 40 to 110 deg F, No primer needed on non-pressure DWV, where local codes permit Oatey 83675243224
Type: Low VOC, Series: 1800, Container Size: 32 oz, Form: Opaque Liquid, Color: Gray, Odor/Scent: Solvent, VOC Content: 474 g/L, Flash Point: 14 to 23 deg F, Composition: Furan, Tetrahydro, Methyl Ethyl Ketone, Polyvinyl Chloride, Cyclohexanone, Silica, Amorphous, Fumed, Specific Gravity: 0.94 /- 0.02 Extra heavy body viscosity, Builds up for large Dia installation to fill gaps, Formulated for quick installation, Recommended application temperature 40 to 110 deg F Oatey 83675018365