Products | Gene Rich - Faucet Parts & Repair

Filters

• Country of Originarrow_drop_down
  • US
• Domestic/Importarrow_drop_down
  • Domestic
• FDA & NSF OEM Approvedarrow_drop_down
  • Yes
• Finisharrow_drop_down
  • Polished Chrome
  • Chrome
• Flangearrow_drop_down
  • 3-1/2 in
  • 2-1/2 in OD
  • 2-3/4 in OD
  • 3-1/4 in OD
  • 3-1/2 in OD
  • 3-7/8 in OD
  • 5-7/8 in OD
  • 10 in OD
  • 2-3/8 in OD
  • 3 in OD
  • 4 in OD
  • 5-1/8 in OD
• Flange ODarrow_drop_down
  • 2-1/2”
  • 3”
• Flow Ratearrow_drop_down
  • 2.2 gpm
• Heightarrow_drop_down
  • 1-3/8"
  • 1-3/8 in
  • 3/8”
  • 1-1/2 in
• Holearrow_drop_down
  • 7/8 in ID
  • 1-1/8 in ID
  • 1-3/8 in ID
  • 1-3/4 in ID
  • 2-1/16 in ID
  • 3-9/16 in ID
  • 6-13/16 in ID
  • 5/8 in
  • 7/8 in
  • 1-1/8 in
  • 1-3/8 in
  • 1-5/8 in
  • 2-1/8 in
  • 3-1/8 in
• Hole IDarrow_drop_down
  • 1-1/16”
  • 1-11/16”
• I.Darrow_drop_down
  • 3/8”
• Includesarrow_drop_down
  • 40-00, 40-0, 40-1/4 in Standard, 30-1/4 in Large, 15-3/8 in Standard, 15-3/8 in Medium, 10-3/8 in Large, 10-1/2 in Standard Washer
  • (20) Neoprene Flat Washer, (4) Brass Bibb Screws
  • (35) R76A, (35) R74A, (25) R87A, (25) R80A, (15) R77A, (10) R73A, (10) R78A, (10) R81A, (10) R79A, (10) R82A, (8) R83A, (7) R86A O-Rings
  • (20) Neoprene Beveled Washer, (4) Brass Bibb Screws
• Inside Diameterarrow_drop_down
  • 3/8 in
  • 1-3/16 in
  • 29/64 in
  • 25/64 in
  • 1-7/16 in
  • 1-15/16 in
• Manufacturerarrow_drop_down
  • Gene Rich
• Materialarrow_drop_down
  • Die Cast Zinc
  • Solid Brass
  • Brass
  • Steel
  • Steel Escutcheon
  • Rubber
  • Nitrile rubber 70 Duro
  • Molded Neoprene
• Mfg Standards/Approvalsarrow_drop_down
  • ANSI A-112.18M
  • MIL-W-19016
• Nominal Sizearrow_drop_down
  • 1/2 x 7/16 in
  • 3/4 x 3/8 in
  • 3/8 in Large
  • #00 Standard
  • 44930 in
  • #0 Small
• O.D.arrow_drop_down
  • 23/32”
• Outside Diameterarrow_drop_down
  • 3/4 in
  • 13/16 in
  • 1-11/16 in
  • 21/32 in
  • 1-7/16 in
  • 2-3/16 in
  • 9/16 in
  • 11/16 in
  • 1/2 in
  • 45185 in
  • 17/32 in
  • 19/32 in
• Package Weightarrow_drop_down
  • 0.465 lb
  • 0.43875 lb
  • 0.0305 lb
  • 0.0335 lb
  • 0.029 lb
  • 0.0232 lb
  • 0.043 lb
  • 0.0332 lb
  • 0.04208 lb
  • 0.02 lb
  • 0.0524 lb
  • 0.04 lb
  • 0.055 lb
  • 0.075 lb
  • 0.0035 lb
  • 0.0061 lb
  • 0.0128 lb
  • 0.00175 lb
  • 0.00345 lb
  • 0.0078 lb
  • 0.007 lb
  • 0.00745 lb
  • 0.725 lb
  • 1.325 lb
  • 0.53 lb
  • 0.395 lb
  • 9.5E-4 lb
  • 1.455 lb
  • 0.00245 lb
  • 0.11 lb
  • 0.1182 lb
  • 0.1148 lb
  • 0.002 lb
  • 0.00185 lb
• Shapearrow_drop_down
  • Beveled
  • Flat
• Sizearrow_drop_down
  • 3 in
  • 44993 in
  • 3/4” IPS
  • 1 in IPS
  • 1-1/4” IPS
  • 1-1/2 in IPS
  • 2 in IPS
  • 3/4 in CWT
  • 7/8 in OD
  • 1-1/4” OD
  • 1-1/2 in OD
  • 1/2 in CWT
  • 1-1/4 in OD
  • 39448 in
  • 39450 in
  • 39452 in
  • 2 in OD
  • 1/2 in IPS
  • 3/4 in IPS
  • 1-1/4 in IPS
  • 3 in IPS
  • 4 in
  • 6 in IPS
  • 1 in CWT
  • 1-1/4 in CWT
  • 1-1/2 in CWT
  • 2 in CWT
  • 3 in CWT
• Specificationsarrow_drop_down
  • 3/4 x 1/2 in FNPT
• Stylearrow_drop_down
  • Shallow
  • Deep Bell
• Suitable For Use Witharrow_drop_down
  • Kitchen and Bath Toilet/Closet
  • Diverter Spout
  • Kitchen and Bath Faucet
  • Pipe Fitting and Valve
  • R35 Series Friction Ring
  • R34 Series Friction Ring
  • 1-1/2 x 1-1/4 in Slip Nut
  • W431, W432 and W434 Series Cone Slip Joint Washer
  • W441 Series Cone Slip Joint Washer
  • 1-1/4 in Slip Nut
  • 1-1/2 in Slip Nut
  • 2 in Slip Nut
• Thicknessarrow_drop_down
  • 3/16 in
  • 1/8 in
  • 3/32 in
• Thread Sizearrow_drop_down
  • 55/64-27
  • 15/16-27
  • 13/16-27
• Thread Typearrow_drop_down
  • Female
  • Male
• Typearrow_drop_down
  • Non-Slotted
  • Sure Grip
  • Beveled (Cone) slip joint Threaded washer
  • Square Cut
  • 200-Pieces
  • Escutcheon
  • With Springs
• Usagearrow_drop_down
  • 1/2” Nut, 3/8” Threaded for corrugated copper Lav supply line
• Use witharrow_drop_down
  • #R34 friction rings