-
Product Featuresarrow_drop_down
- 3-point roller design assists in anti-siphon protection
- Pump head requires no valves, allows for easy maintenance
- Self-priming against maximum working pressure, foot valve not required
- Pump does not lose prime or vapor lock
- Pumps off-gassing solutions and can run dry
- Output volume is not affected by back pressure
- Injection check valve included with models rated 100 psi (6.9 bar) maximum
- Easy to change pump tube; lubrication is not required
- Pump tubes and pump heads interchange between models
- Models (Santoprene only) tested by Water Quality Association to conform to ANSI/NSF STD 61
- Adjustable models (Santoprene only) tested by ETL to conform to ANSI/NSF STD 50
-
Specificationsarrow_drop_down
- Max. Flow (gpd): 14.00 gpd
- Flow Rate Output Control: Variable Pump
- RPM: 26
- Self-Priming: Yes
- Suction Lift: 25 ft
- Includes: (3) 1/4 in Connecting Nuts, (3) 1/4 in Ferrules, 1/4 in OD x 20 ft White Polyethylene Tubing, 1/4 in Weighted Suction Line Strainer, Injection Check Valve, Spare Peristaltic Pump Tube
- Flow Rate: 0.009 gpm/0.036Lpm
- Voltage: 115V AC cc/Min.: 36.74 cc/min
- Reproducibility: +/-5.0%
- Max. Viscosity: 100 cps
- Seals and O-Rings: Buna-N
- Tubing Material: Santoprene
- Head and Fitting Material: Polycarbonate/Polypropylene
- Body Material: Plastic
- Cord Length: 6 ft
- Type: Peristaltic
- Phase: 1
- Number of Feeds: 1
- Turn Down Ratio: 8:1
- Features: 3-Roller Design, Compact, Single
- Head Height: 5 1/2 in
- Width: 3 3/4 in
- HP: 1/40 hp
- RPM: 3,250 RPM
- Min. Flow Rate: 1.70 gpd
- Length: 6 in
- Hz: 60
- Max. Pressure: 80 psi
- Length (Straight Wireway): : 6 in
-
Resourcesarrow_drop_down
