Saturated mineral fillers and other inert ingredients
A gray, permanently soft, non-toxic, non-volatile compound that will adhere to most clean, dry surfaces
May be painted immediately after application and will not bleed through the dry paint film
Non-corrosive, will not corrode metal
Non-irritant to eyes or skin
Unlimited shelf life
Used primarily by the building and specifically by the electrical trade to seal around junction boxes, flashings and service mast entries
General purpose sealant for a variety of purposes
It can be shaped by hand to any form and reused if necessary
1.5.1 at 212 deg F/100 deg C, 0.4.8 x 109 Ohm-cm 1.5.2 after 96 hours at 239 deg F/115 deg C, 4.8 x 1010 Ohm-cm (ASME power test code of 1965, Section 40.5) resistivity
NEER duct seal may be painted immediately after application and will not bleed through the dry paint film
Non-corrosive will not corrode metal
Non-drying synthetic polymers and oils
Specificationsarrow_drop_down
Application: Refrigeration, Plumbing , Metal-Fabrication Fields, Seal Junction Boxes, Flashings, Service Masts, Heating and Cooling Applications