Loading ...

Search in: cody co duct work Category

Cody Company
Cody Company
10" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7027 MFG Part #: 1252610
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
10" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7015 MFG Part #: 1252810
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
10" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0127 MFG Part #: 12510
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
10" Inline Adjustable Damper
Locke Part #: L7037 MFG Part #: 32010
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request Cody Company
Cody Company
Cody Company
10" x 10" x 10" Furnace Tee
Locke Part #: L1207 MFG Part #: 825101010
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
10" x 10" x 10" Wye
Locke Part #: L0236 MFG Part #: 800101010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10" x 10" x 6" Wye
Locke Part #: L0233 MFG Part #: 80010106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10" x 10" x 7" Insulated Register Boot
Locke Part #: L0177 MFG Part #: 64510107
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
10" x 10" x 8" Hi Side Insulated Boot
Locke Part #: L7048 MFG Part #: 64810108
Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
10" x 10" x 8" Insulated Register Boot
Locke Part #: L0159 MFG Part #: 64510108
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
10" x 10" x 8" Wye
Locke Part #: L0235 MFG Part #: 80010108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Increase type with flange & damper Cody Company
10" x 4" x 4" Concrete Box
Locke Part #: L0259 MFG Part #: 2514104
Cody Company
Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Cody Company
10" x 4" x 6" Concrete Box
Locke Part #: L0265 MFG Part #: 2514106
Cody Company
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
10" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7006 MFG Part #: 1042610
Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall Cody Company
Cody Company
10" x 6" x 6" Wye
Locke Part #: L0240 MFG Part #: 8001066
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
10" x 8" x 6" Sealed Wye
Locke Part #: L7092 MFG Part #: 8011086
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10" x 8" x 6" Wye
Locke Part #: L0238 MFG Part #: 8001086
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10" x 8" x 7" Wye
Locke Part #: L0232 MFG Part #: 8001087
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Cody Company
10" x 8" x 8" Sealed Wye
Locke Part #: L7090 MFG Part #: 8011088
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10" x 8" x 8" Wye
Locke Part #: L0237 MFG Part #: 8001088
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
10" x 9" x 5" Wye
Locke Part #: L0234 MFG Part #: 8001095
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10" x 9" x 6" Wye
Locke Part #: L0241 MFG Part #: 8001096
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10" x 9" x 7" Wye
Locke Part #: L0239 MFG Part #: 8001097
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
10' "S" Cleat for Rectangular Duct
Locke Part #: L0073 MFG Part #: 03010
Cody Company
10' Drive Cleat for Rectangular Duct
Locke Part #: L0074 MFG Part #: 0352610
Cody Company
Cody Company
12" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7028 MFG Part #: 1252612
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
12" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0128 MFG Part #: 12512
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
12" Inline Adjustable Damper
Locke Part #: L7038 MFG Part #: 32012
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
12" x 10" x 10" Sealed Wye
Locke Part #: L7091 MFG Part #: 801121010
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
12" x 10" x 10" Wye
Locke Part #: L0244 MFG Part #: 800121010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
12" x 10" x 6" Wye
Locke Part #: L0247 MFG Part #: 80012106
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
12" x 10" x 8" Sealed Wye
Locke Part #: L7094 MFG Part #: 80112108
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
12" x 10" x 8" Wye
Locke Part #: L0246 MFG Part #: 80012108
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Cody Company
12" x 12" x 10" Insulated Register Boot
Locke Part #: L0182 MFG Part #: 645121210
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
12" x 12" x 12" Furnace Tee
Locke Part #: L1208 MFG Part #: 825121212
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
12" x 12" x 12" Wye
Locke Part #: L0243 MFG Part #: 800121212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
12" x 12" x 6" Wye
Locke Part #: L0242 MFG Part #: 80012126
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
12" x 12" x 8" Wye
Locke Part #: L0248 MFG Part #: 80012128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Cody Company
12" x 4" x 6" Concrete Box
Locke Part #: L0266 MFG Part #: 2514126
Cody Company
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Cody Company
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
12" x 4" x 8" Concrete Box
Locke Part #: L0267 MFG Part #: 2514146
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
12" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7007 MFG Part #: 1042612
Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Cody Company
12" x 8" x 8" Insulated Register Boot
Locke Part #: L0195 MFG Part #: 6458128
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
12" x 8" x 8" Sealed Wye
Locke Part #: L7093 MFG Part #: 8011288
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
12" x 8" x 8" Wye
Locke Part #: L0245 MFG Part #: 8001288
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
12" x 9" x 9" Wye
Locke Part #: L0263 MFG Part #: 8001299
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Cody Company
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength Cody Company
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
Product Image Not Available 14 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6150 MFG Part #: L6150
Cody Company
14" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7029 MFG Part #: 1252414
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
14" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L0129 MFG Part #: 12514
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
Cody Company
14" x 10" x 10" Wye
Locke Part #: L0208 MFG Part #: 800141010
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
14" x 12" x 10" Wye
Locke Part #: L0253 MFG Part #: 800141210
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
14" x 12" x 12" Wye
Locke Part #: L0252 MFG Part #: 800141212
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
14" x 12" x 8" Wye
Locke Part #: L0254 MFG Part #: 80014128
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
14" x 14" x 12" Insulated Register Boot
Locke Part #: L0175 MFG Part #: 645141412
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
14" x 14" x 12" Wye
Locke Part #: L0251 MFG Part #: 800141412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
14" x 14" x 14" Furnace Tee
Locke Part #: L1209 MFG Part #: 825141414
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Cody Company
14" x 4" x 6" Concrete Box
Locke Part #: L0270 MFG Part #: 2514128
Cody Company
Constructed of Standard 30 GA Galvanized Metal, 1/8 Hem on Collar & Register Openings, Flange for snap on rails Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Cody Company
14" x 4" x 8" Concrete Box
Locke Part #: L0271 MFG Part #: 2514148
Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
14" x 4' Furnace Pipe, 26 Gauge
Locke Part #: L7008 MFG Part #: 1042614
Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall Cody Company
Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Cody Company
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength Cody Company
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength Cody Company
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength Cody Company
Constructed of 28 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
16" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7030 MFG Part #: 1252416
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
16" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L0130 MFG Part #: 12516
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
16" x 14" x 12" Wye
Locke Part #: L0264 MFG Part #: 800161412
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
16" x 14" x 14" Wye
Locke Part #: L0256 MFG Part #: 800161414
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
16" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7009 MFG Part #: 1042416
Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
18" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L7031 MFG Part #: 1252418
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
18" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0131 MFG Part #: 12518
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
18" x 14" x 14" Wye
Locke Part #: L0255 MFG Part #: 800181414
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
18" x 18" x 16" Wye
Locke Part #: L0249 MFG Part #: 800181816
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
18" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7010 MFG Part #: 1042418
Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Product Image Not Available 20 X 10 ROUGH-IN RET AIR FRAME
Locke Part #: L6153 MFG Part #: L6153
Cody Company
1 Flange on All Four Sides for Easy Attachment, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Available Lined or Unlined- Must Specify the R Value of Liner, Standard Height 30 Unless Otherwise Specified Cody Company
20" Adjustable 90° Elbow, 24 Gauge
Locke Part #: L0132 MFG Part #: 12520
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
20" Long, 28 Gauge "W" Brace
Locke Part #: L0031 MFG Part #: 071320
Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
20" x 20" x 18" Wye
Locke Part #: L0250 MFG Part #: 800202018
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
20" x 4' Furnace Pipe, 24 Gauge
Locke Part #: L7011 MFG Part #: 1042420
Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
Constructed of 26 GA Galvanized Sheet Metal, Factory Assembled, Available with Collar, 1 Outside Flange, Available with Insulation (#045-R4.2 or R6), 19 tall at highest point, Stiffener Beads for added strength Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1/2 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
Product Image Not Available 225 10X6X6 END BOOT W/FLANGE
Locke Part #: L7482 MFG Part #: 2256106
Cody Company
Product Image Not Available 225 12X6X7 END BOOT W/FLANGE
Locke Part #: L7483 MFG Part #: 2256127
Cody Company
Product Image Not Available 225 14X6X8 END BOOT W/ FLANGE
Locke Part #: L7484 MFG Part #: 2256148
Cody Company
Product Image Not Available 225 14X8X9 END BOOT W/FLANGE
Locke Part #: L7485 MFG Part #: 2258149
Cody Company
Product Image Not Available 225 8X4X5 END BOOT W/FLANGE
Locke Part #: L7481 MFG Part #: 225485
Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
ASTM - A653 SCB Material, 28GA, 26GA-STD, 24GA Gauges, Snap Lock Seam Pittsburgh available upon request, 1 Lined,, Flange available upon request, Plenums up to 48 are 3PC boxed (L Shape) with one end cap Over 48 are 5pc strapped Cody Company
Product Image Not Available 235 10X6X6 90DEG BOOT W/FLANGE
Locke Part #: L7487 MFG Part #: 2356106
Cody Company
Product Image Not Available 235 12X6X7 90DEG BOOT W/F;ANGE
Locke Part #: L7488 MFG Part #: 325 12X6X7
Cody Company
Product Image Not Available 235 14X6X8 90DEG BOOT W/FLANGE
Locke Part #: L7489 MFG Part #: 235 14X6X8
Cody Company
Product Image Not Available 235 14X8X9 90DEG BOOT S/FLANGE
Locke Part #: L7490 MFG Part #: 235 14X8X9
Cody Company
Product Image Not Available 235 8X4X5 90 DEG BOO W/FLANGE
Locke Part #: L7486 MFG Part #: 235 8X4X5
Cody Company
Product Image Not Available 237 4X10X6 ANGLE BOOT W/BRACE
Locke Part #: L0140 MFG Part #: 2374106
Cody Company
Product Image Not Available 237 4X12X7 ANGLE BOOT W/BRACE
Locke Part #: L0141 MFG Part #: 2374127
Cody Company
Product Image Not Available 24 X 12 ROUGH-IN RET AIR FRAME
Locke Part #: L6152 MFG Part #: L6152
Cody Company
Product Image Not Available 25 X 16 ROUGH-IN RET AIR FRAME
Locke Part #: L6154 MFG Part #: L6154
Cody Company
26 GA Galvanized Metal Construction, Removable Track that Allows use of 1 , 4 , or 4.5 Filter, Starter Hole for Easy Cut Out, 24 GA Hinged Door with Foam Gasket for Better Seal Cody Company
Can be used on Register Boxes, Boots and Insulated boxes., Snaps to all fours sides so box can be Installed to run in either direction Cody Company
3" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0120 MFG Part #: 1253
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
3" x 10' RD Conductor Pipe, 28 Gauge
Locke Part #: L0463 MFG Part #: 1103
Plain round galvanized pipe, Constructed of 30 GA or 28 GA Galvanized Metal Cody Company
3" x 3" x 3" Furnace Tee
Locke Part #: L1200 MFG Part #: 825333
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Product Image Not Available 30 X 8 ROUGH-IN RET AIR FRAME
Locke Part #: L6151 MFG Part #: L6151
Cody Company
4" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7021 MFG Part #: 125264
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
4" Adjustable 90° Elbow, 28 Gauge
Locke Part #: L7012 MFG Part #: 125284
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
4" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0121 MFG Part #: 1254
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
4" Single Wall Cap
Locke Part #: L0015 MFG Part #: 9504
Galvanized Steel Formed Material, Options Available: Screen Cody Company
4" Single Wall Roof Cap
Locke Part #: L0023 MFG Part #: 9304
Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
4" x 10' RD Conductor Pipe, 28 Gauge
Locke Part #: L0464 MFG Part #: 1104
Plain round galvanized pipe, Constructed of 30 GA or 28 GA Galvanized Metal Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
4" x 4" x 4" Furnace Tee
Locke Part #: L1201 MFG Part #: 825444
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
4" x 8" x 5" Insulated Register Boot
Locke Part #: L0154 MFG Part #: 645485
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
48" Long, 28 Gauge "W" Brace
Locke Part #: L0026 MFG Part #: 071348
Cody Company
5" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0122 MFG Part #: 1255
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
5" Single Wall Cap
Locke Part #: L0016 MFG Part #: 9505
Galvanized Steel Formed Material, Options Available: Screen Cody Company
5" Single Wall Roof Cap
Locke Part #: L0024 MFG Part #: 9305
Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
5" x 4" x 4" Wye
Locke Part #: L0205 MFG Part #: 800544
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
5" x 5" x 5" Furnace Tee
Locke Part #: L1202 MFG Part #: 825555
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
6" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7023 MFG Part #: 125266
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
6" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0123 MFG Part #: 1256
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
6" Inline Adjustable Damper
Locke Part #: L7033 MFG Part #: 3206
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request Cody Company
Cody Company
6" Single Wall Cap
Locke Part #: L0017 MFG Part #: 9506
Galvanized Steel Formed Material, Options Available: Screen Cody Company
6" Single Wall Roof Cap
Locke Part #: L0025 MFG Part #: 9306
Cody Company
Cody Company
6" x 10" x 6" Hi Side Insulated Boot
Locke Part #: L7041 MFG Part #: 6486106
Cody Company
6" x 10" x 6" Insulated Register Boot
Locke Part #: L0157 MFG Part #: 6456106
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
6" x 12" x 7" Hi Side Insulated Boot
Locke Part #: L7042 MFG Part #: 6486127
Cody Company
6" x 12" x 7" Insulated Register Boot
Locke Part #: L0156 MFG Part #: 6456127
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
6" x 12" x 8" Insulated Register Boot
Locke Part #: L0049 MFG Part #: 6456128
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Cody Company
6" x 14" x 8" Hi Side Insulated Boot
Locke Part #: L7043 MFG Part #: 6486148
Cody Company
6" x 14" x 8" Insulated Register Boot
Locke Part #: L0155 MFG Part #: 6456148
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Standard 30 GA Galvanized Metal Construction, One Piece Boot Raw, Edge (Drives not included) Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
6" x 4" x 4" Wye
Locke Part #: L0210 MFG Part #: 800644
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
6" x 4' Furnace Pipe, 28 Gauge
Locke Part #: L7002 MFG Part #: 104266
Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
6" x 5" x 5" Wye
Locke Part #: L0212 MFG Part #: 800655
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
6" x 6" x 4" Insulated Register Boot
Locke Part #: L0151 MFG Part #: 645664
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Cody Company
6" x 6" x 4" Wye
Locke Part #: L0209 MFG Part #: 800664
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
6" x 6" x 5" Hi Side Insulated Boot
Locke Part #: L7040 MFG Part #: 648665
Cody Company
6" x 6" x 5" Insulated Register Boot
Locke Part #: L0193 MFG Part #: 645665
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
6" x 6" x 6" Furnace Tee
Locke Part #: L1203 MFG Part #: 825666
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
6" x 6" x 6" Insulated Register Boot
Locke Part #: L0176 MFG Part #: 645666
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Cody Company
6" x 6" x 6" Sealed Wye
Locke Part #: L7086 MFG Part #: 801666
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
6" x 6" x 6" Wye
Locke Part #: L0211 MFG Part #: 800666
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Increase type with flange & damper Cody Company
Product Image Not Available 641 6X12X6 INSUL BOOT
Locke Part #: L7454 MFG Part #: 6416126
Cody Company
Product Image Not Available 641 6X12X8 INSUL BOOT
Locke Part #: L7455 MFG Part #: 6416128
Cody Company
Cody Company
Cody Company
Cody Company
Cody Company
Cody Company
Product Image Not Available 651-R8 12X12X10 INSUL BX 28GA
Locke Part #: L7426 MFG Part #: 651R828121210
Cody Company
7" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0124 MFG Part #: 1257
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
7" Inline Adjustable Damper
Locke Part #: L7034 MFG Part #: 3207
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request Cody Company
7" x 4' Furnace Pipe, 28 Gauge
Locke Part #: L7003 MFG Part #: 104267
Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
7" x 5" x 5" Sealed Wye
Locke Part #: L7087 MFG Part #: 801755
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
7" x 5" x 5" Wye
Locke Part #: L0213 MFG Part #: 800755
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
7" x 6" x 4" Wye
Locke Part #: L0217 MFG Part #: 800764
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
7" x 6" x 5" Wye
Locke Part #: L0218 MFG Part #: 800765
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
7" x 6" x 6" Wye
Locke Part #: L0214 MFG Part #: 800766
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
7" x 7" x 6" Wye
Locke Part #: L0215 MFG Part #: 800776
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
7" x 7" x 7" Furnace Tee
Locke Part #: L1204 MFG Part #: 825777
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
7" x 7" x 7" Wye
Locke Part #: L0216 MFG Part #: 800777
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Product Image Not Available 786 10X6 UPPER COMBUST BOX W/ FLANGE
Locke Part #: L9010 MFG Part #: 786610
Cody Company
Product Image Not Available 786L 14 X 4 LOWER COMBU BOX
Locke Part #: L9011 MFG Part #: 786L
Cody Company
8" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7025 MFG Part #: 125268
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
8" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0125 MFG Part #: 1258
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
8" Air Duct Connector
Locke Part #: L0085 MFG Part #: 570-8"
Used as couplings between lengths of PVC warm air duct pipe. Cody Company
8" Inline Adjustable Damper
Locke Part #: L7035 MFG Part #: 3208
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request Cody Company
Cody Company
Increase type with flange & damper Cody Company
8" x 14" x 9" Insulated Register Boot
Locke Part #: L0153 MFG Part #: 6458149
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal., Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded., R6 & R8 is fabricated without flange for snap on rails, Body is 4 tall Cody Company
Cody Company
Cody Company
8" x 4' Furnace Pipe, 28 Gauge
Locke Part #: L7004 MFG Part #: 104268
Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
8" x 6" x 4" Wye
Locke Part #: L0258 MFG Part #: 800864
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
8" x 6" x 5" Wye
Locke Part #: L0219 MFG Part #: 800865
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
8" x 6" x 6" Sealed Wye
Locke Part #: L7088 MFG Part #: 801866
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
8" x 6" x 6" Wye
Locke Part #: L0224 MFG Part #: 800866
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
8" x 7" x 5" Wye
Locke Part #: L0225 MFG Part #: 800875
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
8" x 7" x 6" Wye
Locke Part #: L0223 MFG Part #: 800876
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Cody Company
Cody Company
8" x 8" x 4" Wye
Locke Part #: L0257 MFG Part #: 800884
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
8" x 8" x 6" Hi Side Insulated Boot
Locke Part #: L7045 MFG Part #: 648886
Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
Body, Top and Collar Constructed of 30GA Galvanized Metal, Body is 4 tall, Internally lined - Minimum R6 liner, 1.5 thickness, R8 liner is 2 Thickness, Register and collar size are embossed on top, Top of Collar Hemmed and Beaded, R6 & R8 is fabricated with 4 corner tabs Cody Company
8" x 8" x 6" Insulated Register Boot
Locke Part #: L0152 MFG Part #: 645886
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Cody Company
8" x 8" x 6" Wye
Locke Part #: L0220 MFG Part #: 800886
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
8" x 8" x 7" Hi Side Insulated Boot
Locke Part #: L7046 MFG Part #: 648887
Cody Company
8" x 8" x 7" Insulated Register Boot
Locke Part #: L0173 MFG Part #: 645887
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of 28 or 30GA Galvanized Sheet Metal, 45 Slant Top Design, Top of collar is hemmed and beaded, Register and collar size are embossed, Flange included for rails, Internally lined with R4.2 or R6 or R8 Cody Company
Constructed of Standard 30GA Galvanized Metal, Sheet Rock Flange, 1/8 Hem on Collar & Register Openings Cody Company
Cody Company
8" x 8" x 7" Wye
Locke Part #: L0221 MFG Part #: 800887
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
8" x 8" x 8" Furnace Tee
Locke Part #: L1205 MFG Part #: 825888
Constructed of Galvanized Metal, Crimped on 2 Branches, 90 leg, Sized as A x B x C, Crimp on B & C Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
Insulated Register Boot with R4.2, R6 or R8 liner and 45 Adjustable Elbow, , Internally lined R4.2 or R6 or R8, Body, Top and Collar Constructed of 30GA Galvanized Metal, 45 Adjustable Elbow with hem & bead, 4 Tall Body, Register and collar size embossed on product Cody Company
30 GA Galvanized Steel, 1 Flange for Rails Cody Company
Cody Company
8" x 8" x 8" Wye
Locke Part #: L0222 MFG Part #: 800888
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
9" Adjustable 90° Elbow, 26 Gauge
Locke Part #: L7026 MFG Part #: 125269
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
9" Adjustable 90° Elbow, 30 Gauge
Locke Part #: L0126 MFG Part #: 1259
Adjustable 90 Elbow,, Fully Adjustable, Constructed of Galvanized Metal, Hemmed Base 4 and up; Buttons on Crimped End for Sizes 4 to 14 Cody Company
9" Inline Adjustable Damper
Locke Part #: L7036 MFG Part #: 3209
Constructed of 30 GA Galvanized Metal (Smacna Available), Crimped on one end, Available in 4 to 22 diameters, Adjustable Damper, Standard Stand Off. Type A2 & B2 Stand Off s by request Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal., Standard and Smacna Gauge., Buttons on crimped ends of 30 & 28 gauge only, 4 through 18 STD GA pipe., Eliminates the need for sheet metal screws., Reinforcement beads are placed every 12 apart beginning 6 from the hemmed end., Snaplock seam technology is available in Standard Gauge 4 thru 18 . Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
9" x 7" x 5" Wye
Locke Part #: L0227 MFG Part #: 800975
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
9" x 7" x 6" Wye
Locke Part #: L0230 MFG Part #: 800976
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
9" x 7" x 7" Sealed Wye
Locke Part #: L7089 MFG Part #: 801977
Constructed of Galvanized Metal, Available in Standard and SMACNA Gauges, Base End A with Hem, Crimped End on B & C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
9" x 7" x 7" Wye
Locke Part #: L0228 MFG Part #: 800977
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Constructed of Galvanized Metal, Collars are Hemmed Cody Company
9" x 8" x 5" Wye
Locke Part #: L0226 MFG Part #: 800985
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
9" x 8" x 6" Wye
Locke Part #: L0229 MFG Part #: 800986
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
9" x 8" x 7" Wye
Locke Part #: L0231 MFG Part #: 800987
Constructed of Galvanized Metal, Available in Standard and SMACNA gauges, Crimped End on C Branch, Dimension A must be > B, Dimension B must be = or > C Cody Company
Product Image Not Available 950 3" SINGLE WALL CAP
Locke Part #: L0014 MFG Part #: 9503
Cody Company
Product Image Not Available 990 1"X100' NONPERF HNGER STRP
Locke Part #: L6144 MFG Part #: 990 1X100
Cody Company
Glastite Flexible Duct Connector
Locke Part #: L0500 MFG Part #: CNRG100
1-3/4" Metal, 3" Fabric, 1-3/4" Metal 28 Ga. Galvanized, "S LOC" SEAM Cain Manufacturing
Cody Company
Cody Company
Feedback