Loading ...

Loading ...

Search in: Parts Category

Size: 1", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
Voltage: 24 VAC, 50/60 Hz Solenoid, Material: Plastic, Valve Type: Inline, Operating Pressure: 15 to 150 psi, Dimensions HxWxD: 5" x 4.75" x 3.37", Flow Range: 0.2 to 40 gpm, Operating Temperature (Ambient Temperature): 125°F, Operating Temperature (Minimum Water and Ambient Air Temperature: 40°F, Operating Temperature (Water Temperature): 110°F, Valve Inlet/Outlet Configuration: NPT Female x NPT Female Threaded, Valve Size: 1" 1 in. female pipe thread inlet and outlet inline irrigation valve, Buna-N diaphragm offers superior performance in harsh water environments, Reliable, non-clogging design, Reverse Flow design reduces stress on diaphragm for dependable operation, In-line design minimizes pressure loss of dirt and debris during installation and system start-up, Operates automatically or manually with manual bleed screw, Works with any standard sprinkler timer, Designed for below-ground installation, out of sight and away from playful hands, Energy efficient, low power encapsulated solenoid with captured plunger, Inrush: .30 amp, Holding: .19 amp RAIN BIRD CORP
MBNL200.jpg1" No-Lead Brass Pitless Adapter 400#
Locke Part #: S0065MFG Part #: MBNL200 Compare
0 - 100 psi. MERRILL MFG 642367123888
BATNL1002.jpg1" No-Lead Brass Tank Tee 1/2" Drains 11" Long Cast
Locke Part #: S0198MFG Part #: BATNL1002 Compare
Solid brass construction. Short lets tapped with 2-1/4" taps. Top of crosstapped 1/2" FIP, 11". 3/4" FIP x 1" MIP. MERRILL MFG 642367417482
CVMNL100.jpg1" No-Lead Bronze Submersible Check Valve
Locke Part #: S0075MFG Part #: CVMNL100 Compare
For Submersible Pumps. MERRILL MFG 642367089412
Pricing Category: SR01, Stock or OAN: s, Width: 3-1/4", Height: 7-1/4", Length: 5-1/2", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: GLOBE ANGLE CONFIGURAT, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 150 GPM, Flow without PRS-D option: 2 to 150 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
Model: Remote Control Valve, Pricing Category: SR01, Stock or OAN: s, Width: 3-1/3", Height: 4-1/2", Length: 4-3/8", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: REMOTE CONTROL SL X SL, Coil Resistance: 42-55 Ohms, Holding Current: 0.19 A at 60 Hz, Inrush Current: 0.30 A at 60 Hz, Ambient Air Temperature: Up to 125°, Optional Configuration: Slip x Slip Double-filtered pilot-flow design for maximum reliability., Balanced-pressure diaphragm for long life., External bleed to manually flush system of dirt and debris during installation and system start-up., Internal bleed for spray-free manual operation., Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter., Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring., Operates in low-flow and Xerigation applications when the RBY filter is installed upstream., 1.25" (3,2 cm) stainless steel phillips head screws., Accepts latching solenoid for use with Rain Bird battery-operated controllers., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current, Solenoid coil resistance: 38 Ohms, Available as 1 (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations RAIN BIRD CORP
Model: Remote Control Valve, Pricing Category: SR01, Stock or OAN: s, Width: 3-1/3", Height: 5-3/5", Length: 4-3/8", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: REMOTE CONTROL SL X SL, Coil Resistance: 42-55 Ohms, Holding Current: 0.19 A at 60 Hz, Inrush Current: 0.30 A at 60 Hz, Optional Feature: Flow Control, Ambient Air Temperature: Up to 125°, Optional Configuration: Slip x Slip Double-filtered pilot-flow design for maximum reliability., Balanced-pressure diaphragm for long life., External bleed to manually flush system of dirt and debris during installation and system start-up., Internal bleed for spray-free manual operation., Energy-efficient, low-power encapsulated solenoid with captured plunger and 90-mesh (200 micron) solenoid filter., Buna-N diaphragm with self-cleaning 90 mesh (200 micron) pilot water filter and captive spring., Operates in low-flow and Xerigation applications when the RBY filter is installed upstream., 1.25" (3,2 cm) stainless steel phillips head screws., Accepts latching solenoid for use with Rain Bird battery-operated controllers., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.30 A (7.2 VA) inrush current; 0.23 A (5.5 VA) holding current, Solenoid coil resistance: 38 Ohms, Incorporates all features of DV Series valves, Unique, easy-to-turn pressure-assisted flow control mechanism, Available as 1 (26/34) Slip-by-Slip (SS) configuration for low cost, solvent-weld installations RAIN BIRD CORP
RBHTNL7510.jpg1" x 1" x 3/4" No-Lead Bronze Hydrant Tee
Locke Part #: R0596MFG Part #: RBHTNL7510 Compare
MERRILL MFG 642367125349
S75.jpg1"FIP x 1-1/4"MIP Check Valve
Locke Part #: S0074MFG Part #: CVMNL125 Compare
For Submersible Pumps. MERRILL MFG
SB-CPLG.jpg1/2" Barb x 1/2" Barb Coupling
Locke Part #: S0291MFG Part #: A46006 Compare
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: COUPLING RAIN BIRD CORP
SBFE-050.jpg1/2" F NPT x 1/2" Barb Elbow
Locke Part #: S0297MFG Part #: A46015 Compare
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ELBOW RAIN BIRD CORP
SBA-050.jpg1/2" M NPT x 1/2" Barb Adapter
Locke Part #: S0296MFG Part #: A46003 Compare
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ADAPTER RAIN BIRD CORP
SBE-050.jpg1/2" M NPT x 1/2" Barb Elbow
Locke Part #: S0292MFG Part #: A46010 Compare
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ELBOW RAIN BIRD CORP
37114.jpg1/2" x 3/4" x 6" Cut-Off Riser
Locke Part #: S0295MFG Part #: RISERCO075 Compare
Size: 1/2" x 3/4"x 6" Flexible plastic composition allows constant bending without breaking, Durable polyethylene construction, Cut riser to desired length, Connect underground pipe to sprinkler heads, Not for use under continuous pressure, For outdoor use with cold water only RAIN BIRD CORP
37069.jpg1/2" x 6" Cut-Off Riser
Locke Part #: S0294MFG Part #: RISERCO6 Compare
Size: 1/2" x 6" Flexible plastic composition allows constant bending without breaking, Cut riser to desired length, Connect underground pipe to sprinkler heads, Not for use under continuous pressure, For outdoor use with cold water only RAIN BIRD CORP
S199.jpg1/4" Snifter Valve
Locke Part #: S0199MFG Part #: SVNL250 Compare
MERRILL MFG
Size: 1-1/2", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
Pricing Category: SR01, Stock or OAN: s, Width: 3-1/2", Height: 8", Length: 6-3/4", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: GLOBE ANGLE CONFIGURAT, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 150 GPM, Flow without PRS-D option: 2 to 150 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
Size: 1-1/4", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
S75.jpg1-1/4"FIP x 1-1/4"MIP Check Valve
Locke Part #: S0078MFG Part #: CVMNL1252 Compare
For Submersible Pumps. MERRILL MFG
Color: Blue, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Blue, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Blue, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Size: 100’ coil, Pricing Category: SR02, Stock or OAN: s, Inside Diameter: 0.49", Description2: PIPE Superior flexibility allows pipe to be efficiently routed around hardscape, terraces, and uneven terrain to turn landscape design into reality., Textured surface makes product easier to handle, contributing to labor efficiency, especially under wet conditions., Up to 30% more flexible than competitors., Enhanced kink resistance., Quick and easy installation lowers material and labor costs, Installs quickly leaving time for additional system installations and incremental revenue opportunities., Operating pressure up to 80 psi (5, 5 bar) and 110 F (43 C). RAIN BIRD CORP
Pricing Category: SR01, Stock or OAN: s, Width: 4", Height: 6-1/2", Length: 4", Pressure: 20 to 200 psi, Temperature: Up to 150° F, Description2: VALVE 24V, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 200 GPM, Flow without PRS-D option: 0.25 to 200 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
STA48C.jpg11-3/4" Torque Arrestor with Stainless Clamps
Locke Part #: S0089MFG Part #: STA48C Compare
MERRILL MFG 642367027360
Color: Brown, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Brown, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Brown, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
ESP4ME.jpg120V 4 Station Base Indoor Controller
Locke Part #: S0466MFG Part #: F55100 Compare
Pricing Category: SR08, Stock or OAN: s, Width: 10.7 in., Depth: 4.4 in., Height: 7.7 in., Operating Voltage: 24VAC 50/60Hz, Output: 25.5 VAC 1A, Description2: UNIT INDOOR MOUNT, Max Operating Temperature: 149°F, Max Coil Holding: 5VA, Max Coil Inrush: 11VA, Station Timing: 1 minute to 6 hours Tailored Watering Schedules:, Extra Simple Programming makes it easy for the crew to meet each landscape s unique needs. With the controller up and running faster than ever before, you ll get more jobs done in less time., Single-Controller Simplicity:, Delay Watering:, Is Mother Nature doing the watering for you Are you having a party and want to make sure the landscape is dry Easily postpone irrigation for up to 14 days. Normal irrigation will resume automatically., Bypass Rain Sensor by Station:, Got a landscaped area under an eave or deck Bypass the rain sensor for that station(s) or for the entire landscape., Seasonal Adjust by Program:, When the seasons change, change with them. Reduce watering down to as little as 5 percent of your scheduled program times or increase it up to 200 percent. Apply to all programs or to each program individually., Total Run Time Calculator by Program:, Calculate the specific amount of time the controller is scheduled to run for a given program. Use it to ensure morning watering is finished before the family wakes up, or reduce your run time to comply with water restrictions., Short Detect/Programming Errors:, The ESP-Me visually notifies you of electrical and programming issues with a bright red LED and scrolling messages across the LCD display., One-Touch Watering:, Need an easy way to turn on the system The ESP-Me offers one-touch watering. With the dial in the AUTO position, just press and hold the right teardrop arrow button., Contractor Default:, Prevent callbacks with Contractor Default. Simply save your programs after setup. If the original watering schedule is overwritten in error, easily restore it in just two steps., User-Friendly Rain Bird Design:, Featuring vibrant colors, an intuitive dial and a bright LCD display, the new ESP-Me is easy on the eyes. And with legendary Extra Simple Programming and the Rain Bird reliability you trust, it s the same easy setup, just better., Input required: 120VAC 10%, 60Hz (International models: 230/240VAC 10%, 50/60Hz), Idle/Off power draw 0.06 amps at 120VAC, Power back-up not required. Nonvolatile memory permanently saves the current programming and a 10 year life lithium battery maintains the controllers time and date during power outages, Seasonal Adjust; 5% to 200%, UL, cUL, CE, CSA, C-Tick, FCC Part 15b, WEEE, S-Mark, IP24 Certifications. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: STRIP 9’ X 18’ NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: STRIP NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Black, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: STRIP NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Pricing Category: SR01, Stock or OAN: s, Width: 6", Height: 8", Length: 6", Pressure: 20 to 200 psi, Temperature: Up to 150° F, Description2: VALVE 24V, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 200 GPM, Flow without PRS-D option: 0.25 to 200 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
Size: 2", WOG: 200, SWP: 125 Lead Free Cast Brass, ISO-9002, 200 WOG, 125 SWP, Swing Type, Threaded Ends Comply with ANSI B2.1 3/8" - 4", Solder Ends Comply with ANSI B16.18 1/2" - 4", Valves are Tested in Accordance w/MSS-SP-82, Application:, Commercial, Light Industrial for Water, Oil, Gas or Steam Matco-Norca Inc
Pricing Category: SR01, Stock or OAN: s, Width: 5", Height: 10", Length: 7-3/4", Pressure: 15 to 150 psi, Temperature: Up to 110° F, Description2: GLOBE ANGLE CONFIGURAT, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 150 GPM, Flow without PRS-D option: 2 to 150 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Water-tight seal between the body and bonnet for maximum confidence, even in the most extreme conditions., Robust electrical design for quiet performance you can count on., Rugged PVC and glass-filled nylon construction for reliable operation., Normally closed, forward flow design., Filtered pilot flow to resist debris and clogging., Slow closing to prevent water hammer and subsequent system damage., Multi-drive screws (Phillips, flathead, hexagonal) for easy maintenance., Globe and angle configuration for flexibility in design and installation., Manual internal bleed operates the valve without allowing water into the valve box. This allows the pressure regulator to be adjusted without turning the valve on at the controller., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Non-rising flow control handle adjusts water flow as needed., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
Pricing Category: SR01, Stock or OAN: s, Width: 6", Height: 8", Length: 6", Pressure: 20 to 200 psi, Temperature: Up to 150° F, Description2: 24V, Coil Resistance: 30-39 Ohms, Flow with PRS-D option: 5 to 200 GPM, Flow without PRS-D option: 0.25 to 200 GPM, Holding Current: 0.28 A (6.72 VA) at 60 Hz, Inrush Current: 0.41 A (9.84 VA) at 60 Hz, Power (Cycles/Sec): 24 VAC 50/60 Hz solenoid Durable glass-filled nylon construction with fabric-reinforced rubber diaphragm for long life and reliable performance., Globe configuration., Normally closed, forward flow design., Slow closing to prevent water hammer and subsequent system damage., Low flow capability for a wide range of applications., One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service., Flow control handle adjusts water flows as needed., Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first., Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs., Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads., Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only)., 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:, 0.41 A (9.8 VA) inrush current, 0.28 A (6.7 VA) holding current RAIN BIRD CORP
XFD-09-12-250.jpg250’ Dripline, 12" Spacing and 0.90 GPH Flow
Locke Part #: S0470MFG Part #: X44031 Compare
Pricing Category: SR02, Stock or OAN: s, Pressure: 8.5 to 60 psi, Outside Diameter: 0.634", Temperature: Up to 100° F, Inside Diameter: 0.536", Wall Thickness: 0.049", Coil Length: 250 ft., Description2: EMMITER 12" SPACING 250’, Flow: 0.90 GPH, Spacing: 12", Ambient Air Temperature: Up to 125°F, Coil Color: Brown, Required Filtration: 120 Mesh Unique material offers significantly greater flexibility and kink-resis-tance for fast, easy installation., The bend radius for XFD dripline is 3 no matter which way you bend the tube. Other driplines will bend 4 if bending with the natural curve of the coil and only 7 if bending against the natural curve of the coil., Greater flexibility assures design capability of tight curves and spaces., Accepts Rain Bird Easy Fit Compression Fittings, 17mm insert fittings and LOC fittings., Variety of flow rates, spacing and coil lengths provides design flexibility for a number of non- turfgrass applications., The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi., Dual-layered tubing (brown over black or purple over black) provides unmatched resistance to chemicals, algae growthand UV damage. RAIN BIRD CORP
Voltage: 24 VAC, 50/60 Hz Solenoid, Material: Plastic, Valve Type: Inline, Operating Pressure: 15 to 150 psi, Dimensions HxWxD: 5" x 4.75" x 3.37", Flow Range: 0.2 to 22 gpm, Operating Temperature (Ambient Temperature): 125°F, Operating Temperature (Minimum Water and Ambient Air Temperature: 40°F, Operating Temperature (Water Temperature): 110°F, Valve Inlet/Outlet Configuration: NPT Female x NPT Female Threaded, Valve Size: 3/4" 3/4 in. female pipe thread inlet and outlet inline irrigation valve, Buna-N diaphragm offers superior performance in harsh water environments, Reliable, non-clogging design, Reverse Flow design reduces stress on diaphragm for dependable operation, In-line design minimizes pressure loss of dirt and debris during installation and system start-up, Operates automatically or manually with manual bleed screw, Works with any standard sprinkler timer, Designed for below-ground installation, out of sight and away from playful hands, Energy efficient, low power encapsulated solenoid with captured plunger, Inrush: .30 amp, Holding: .19 amp RAIN BIRD CORP
SBE-075.jpg3/4" M NPT x 1/2" Barb Elbow
Locke Part #: S0293MFG Part #: A46011 Compare
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi, Description2: BARB ELBOW RAIN BIRD CORP
S100.jpg3/4 - 1-1/2 Plastic Foot Valve
Locke Part #: S0100MFG Part #: FVU75150 Compare
4 for 1 Foot Valve. Positive Sealing. Corrosion-proof. Strong -withstands pressure of over 200 psi. Self-cleaning. Full flow MERRILL MFG
Pricing Category: SR08, Stock or OAN: s Easily expand the Rain Bird ESP-Modular, ESP-Me, ESP-SMT or ESP-SMTe Series Controller with this 3 station hot-swappable module, which can be added without powering down the controller. Modules can be installed in any available slot. RAIN BIRD CORP
501S.jpg5" x 1" Extra Sanitary Well Seal
Locke Part #: S0076MFG Part #: WS500100 Compare
Weight (Lbs): 2, Carton Quantity: 10, MFG#: 501S, Size (in): 5, Fits Casing ID: 4-7/8 - 5-1/4", Drop Pipe IPS: 1", Vent Tap IPS: 1/2", Conduit Tap IPS: 3/4" Molded from HI IMPACT ABS for "EXTRA" strength and endurance., The packer is "Extra" thick and its exclusive design enables the sanitary sealing of an extra wide range of casing sizes., These sanitary well seals have a proven track record of over 2 decades in both warm and cold climates. MERRILL MFG
S0081.jpg5" x 1" Well Seal
Locke Part #: S0081MFG Part #: WS500100 Compare
For shallow-well application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG
S83.jpg5" x 1-1/4" x 1" Well Seal
Locke Part #: S0083MFG Part #: WS522510 Compare
For Deep-Well Application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG
Color: Red, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Red, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
S0068.jpg6" Cast Aluminum Cap
Locke Part #: S0068MFG Part #: VC600 Compare
MERRILL MFG
501S.jpg6" x 1" Extra Sanitary Well Seal
Locke Part #: S0077MFG Part #: WS600100 Compare
Weight (Lbs): 3, Carton Quantity: 10, MFG#: 601S, Size (in): 6, Fits Casing ID: 5-7/8 - 6-1/4", Drop Pipe IPS: 1", Vent Tap IPS: 1/2", Conduit Tap IPS: 3/4" Molded from HI IMPACT ABS for "EXTRA" strength and endurance., The packer is "Extra" thick and its exclusive design enables the sanitary sealing of an extra wide range of casing sizes., These sanitary well seals have a proven track record of over 2 decades in both warm and cold climates. MERRILL MFG
S0081.jpg6" x 1" Well Seal
Locke Part #: S0082MFG Part #: WS600100 Compare
For shallow-well application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG
For Deep-Well Application. 2-piece cast iron construction. Rubber compression seal. MERRILL MFG 642367029531
Pricing Category: SR08, Stock or OAN: s, Description2: F/ESP4ME CONTROLLER ONLY RAIN BIRD CORP
S0068.jpg8" Cast Aluminum Cap
Locke Part #: S0069MFG Part #: VC800 Compare
MERRILL MFG
Color: Green, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Green, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Color: Green, Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet, Optimum Pressure: 30 psi Matched precipitation rates across sets and across patterns in new 5 Series, 8 Series, 10 Series, 12 Series and 15 Series for even water distribution and design flexibility., New 5 Series nozzles meet small-area shrub or turf requirements., New and improved 8 Series Nozzles now have a lower water flow which allow more spray heads per zone, 1800 Series white filter (0.35" x 0.45") screens (shipped with nozzles) maintain precise radius adjustment and prevent clogging. New and improved 5 and 8 Series Nozzles are shipped with blue fine-mesh (0.02" x 0.02") filter screens., Stainless steel adjustment screw to adjust flow and radius., Color-coded on the top to enhance your productivity., The nozzles shall have precipitation rates matched across sets and across patterns., The plastic MPR Nozzle shall be constructed of UV-resistant plastic. The radius adjustment screen shall be constructed of stainless steel., The nozzle shall accept the non-clogging 1800 Series filter screens to allow for radius adjustment and the MPR Plastic Nozzles shall also accept the pressure compensating screens (PCS Series)., The Plastic MPR Nozzles shall be manufactured by Rain Bird Corporation, Azusa, California. RAIN BIRD CORP
Pricing Category: SR08, Stock or OAN: s, Description2: OUTPUT MODULE Expand the ESP-LXM to eight stations by using SM8 station modules., This easy-to-install module snaps into one of four bays on the controller chassis., Dynamic Station Numbering eliminates numbering gaps between stations for easy, confusion-free programming. RAIN BIRD CORP
The Flat Concealed Sprinkler threads, onto Uponor s Fire Sprinkler Adapter, Fitting. All sprinklers come complete, with a plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems. Sprinklers, designated LF are also NSF Annex G, compliant. Uponor
RPKDIAPHRE.jpgDiaphragm Repair Kit for DV and DVF Valves
Locke Part #: S0281MFG Part #: DRKCP/CPF Compare
Pricing Category: SR01, Stock or OAN: s, Description2: 1" DV DIAPH REPAIR KIT Diaphragm Repair Kit includes a new black rubber diaphragm assembly with preinstalled diaphragm filter, 1 new solenoid filter, 6 screws, and a spare diaphragm spring., Primary Application: Residential Installation RAIN BIRD CORP
Pricing Category: SR08, Stock or OAN: s, Width: 14.32", Depth: 5.50", Height: 12.69", Output: 26.5 VAC 1.9A, Description2: OUTDOOR 120V, Input Required: 120 VAC ± 10%, 60Hz Controller Features:, Large LCD display with easy to navigate softkey user interface, Hot-swappable modules, no need to power down the controller to add/remove modules, Dynamic station numbering eliminates station numbering gaps, Weather Sensor input with override switch, Master valve/pump start circuit, 6 user-selectable languages, Non-Volatile (100- year) program memory, Standard 10kV surge protection, Front panel is removable and programmable under battery power, Compatible with Rain Bird Landscape Irrigation and Maintenance Remote, Water Management Features:, Optional Flow Smart Module with Learn Flow utility and flow usage totalizer, FloWatch protection for high and low flow conditions with user defined reactions, FloManager manages hydraulic demand, making full use of available water to shorten total watering time, SimulStations are programmable to allow up to 5 stations to operate at the same time, Water Windows by program plus Manual MV Water Window, Cycle+Soak by station, Rain Delay, 365-Day Calendar Day Off, Programmable Station Delay by program, Normally Open or Closed Master Valve programmable by station, Weather Sensor programmable by station to prevent or pause watering, Program Seasonal Adjust, Global Monthly Seasonal Adjust, Diagnostic Features:, Alarm light with external case lens, Electronic diagnostic circuit breaker, Variable test program, RASTER station wiring test, Controller Hardware:, Plastic, locking, UV resistant, wall-mount case, Optional Metal Case & Pedestal, Flow Smart Module factory installed or field upgradable, Operating Specifications:, Seasonal Adjust; 0% to 300% (16 hrs maximum station run time), 4 independent programs (ABCD), ABCD programs can overlap, 8 start times per program, Program Day Cycles include Custom days of the week, Odd, Odd31, Even, & Cyclical dates, Manual station, program, test program, Power back-up: Lithium coin-cell battery maintains time and date while nonvolatile memory maintains the programming, Multi-valve capacity: Maximum five 24 VAC, 7VA solenoid valves simultaneous operation including the master valve, maximum two solenoid valves per station, Certifications:, UL, CUL, CE, CSA, C-Tick, FCC Part 15 RAIN BIRD CORP
Inlet: 3/4", Coverage Arc: 40° - 360° Reversing Full and Part-Circle, Coverage Radius: 26-38 ft, Pop-Up Height: 4", Rotor Series: 42SA, Features: Gear Drive, Rain Curtain Nozzles Easy arc adjustment from the top requiring only a flat- bladed screwdriver, Pre-installed 3.0 Rain Curtain nozzle, Professional gear-drive, water-lubricated design for durable and reliable operation, Reversing full and part circle rotation from 40 to 360 arc adjustment, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, Thick rubber cover that resists debris and offers the ultimate in safety, Quick check Arc/Fast Forward allows wet or dry arc adjustment, Pressure-activated multifunction wiper seal protects internals from debris and assures positive pop-up retraction, Reinforced flow path for additional side load strength, Additional o-rings and seals for extra protection in "gritty" water, Heavy-duty stainless steel retract spring assures positive pop-down, Self-adjusting stator does not require replacement when changing nozzles RAIN BIRD CORP
A. Self-cleaning Dirt Arrestor Screen, The raised screen prevents clogging ofdrain due to sediment and/or contaminants., B. Patented Pressure Sensitive Valve, Releases water slowly at root level., C. Patented Backflow Check, Eliminates potential freeze damage andbackflow contamination by preventing waterfrom re-entering system., D. Ergonomic, Non-Corrosive Housing, Injection molded with high impact polymerto ensure lifetime protection., E. Broad Dispersing Pad, Keeps roots and soil from penetrating,minimizing the need for sumps. KING INNOVATION 719362221632
Inlet: 1/2", Coverage Arc: 360° Full Circle or 20° - 340° Part Circle, Coverage Radius: 20-41 ft, Dimensions HxWxD: 6" x 4" x 4", Pop-Up Height: 3", Rotor Series: Maxi-Paw / Mini-Paw Low & meduim gallonage pop-up impact rotor sprinklers, Rain Bird's #1 selling pop-up impact sprinkler, Water Saver brass weighted PJ spray guide arm controls stream, prevents side splash onto buildings and walkways, Patented, pressure-activated wiper seal assures reliable pop-up and retraction, Diffuser screw breaks water into smaller droplets for uniform watering, Rugged, high-impact case dimensions: 4 1/8" diameter, 8 5/8" high, Spacing from 26 to 41 feet apart (7,9 to 12,5 m) RAIN BIRD CORP
S0179.jpgOn 20, Off 40
Locke Part #: S0194MFG Part #: MPS2040 Compare
Captive nut on cover. Pressure switch pipe connection 1/4" NPT. Adjustment instructions are inside top cover. Contact points open on cut-out pressure. Points close on cut-in or pressure drop. MERRILL MFG
S0195.jpgOn 30, Off 50
Locke Part #: S0195MFG Part #: MPSM43050 Compare
Shuts off at approximately 10 psi below cut-in pressure Auto start manual start or off lever MERRILL MFG
S0179.jpgOn 30, Off 50
Locke Part #: S0179MFG Part #: MPS3050 Compare
Captive nut on cover. Pressure switch pipe connection 1/4" NPT. Adjustment instructions are inside top cover. Contact points open on cut-out pressure. Points close on cut-in or pressure drop. MERRILL MFG
S0179.jpgOn 40, Off 60
Locke Part #: S0196MFG Part #: MPS4060 Compare
Captive nut on cover. Pressure switch pipe connection 1/4" NPT. Adjustment instructions are inside top cover. Contact points open on cut-out pressure. Points close on cut-in or pressure drop. MERRILL MFG
Pricing Category: SR03, Stock or OAN: s, Description2: ADAPTER Plastic model which attaches nozzle to riser to irrigate ground cover and shrub areas., Adapts Rain Bird nozzles for use with 1/2" (15/21) MPT threaded risers, 1/2" (15/21) female inlet threads, Accepts protective, non-clogging 1800 Series filter screen (shipped with nozzle) and PCS Series screens., Durable, non-corrosive plastic construction., Fine top threads accept all Rain Bird nozzles RAIN BIRD CORP
Material: Plastic, Inlet: 1/2" Male, Coverage Arc: Full/Part Circle, Features: PJ Precision Jet Tube Durable high-impact polymer and stainless steel construction, Full circle (360 degree) or part circle (20 to 340 degree) coverage, with infinite pattern adjustment, Water-Saving PJ spray-guiding arm controls water stream and prevents side splash onto buildings and walkways, Weighted arm for slower rotation and better watering coverage, Straight through flow for superior performance in dirty water conditions, Spacing from 24 to 45 feet, Removable bayonet nozzle for easy cleaning RAIN BIRD CORP
Pricing Category: SR09, Stock or OAN: s, Height: 4", Inlet: 1⁄2" female-threaded, Flow: 0.50 to 4.00 gpm; 30 to 240 gph, Inlet Pressure: 15 to 70 psi Provides convenient 30 psi (2.1 bar) pressure regulation at the riser for any 1/2" FPT emission device or compression adapter., Can be installed above or below grade., Can be used with Xeri-Bird 8 Multi-Outlet Emission Device. RAIN BIRD CORP
Inlet: 1/2", Coverage Arc: 40° - 360° Reversing Full and Part-Circle, Coverage Radius: 19 - 32 ft., Pop-Up Height: 4", Rotor Series: 32SA, Features: Gear Drive, Rain Curtain Nozzles Top-adjust arc adjustment requiring only a flat-bladed screwdriver, This rotor comes with a pre-installed 3.0 Rain Curtain nozzle, Rain Curtain, Nozzle removal feature and easily removable filter screen makes maintenance very simple, Water-lubricated gear-driven design for durable, reliable operation, 40 - 360 Part-circle arc rotation and reversing full-circle rotation in one, Radius adjustment screw allows up to 35% radius reduction without changing nozzles, True 4" (10,2cm) pop-up (measured from center of nozzle), Quick Check Arc/Fast Forward, Dual action, positive stop wiper seal protects internals from debris and assures positive pop-up and retraction, Self-adjusting stator does not require replacement when changing nozzles, Easily removable filter screen, Nozzle removal feature, Arc setting factory preset at 180 for installation convenience RAIN BIRD CORP
Pricing Category: SR01, Stock or OAN: s, Description2: DV SOLENOID REPAIR KIT, Fits On: 075-DAS, 100-DAS, 075-ASVF, 100-ASVF, all DV, DVF, and all JTV valves RAIN BIRD CORP
S0290.jpgSwing Pipe, 2’ Coil
Locke Part #: S0290MFG Part #: EZP-2 Compare
Size: 1/2", Length: 2 ft. Primary Application: Residential Installation, Minimizes system depth with large sprinklers, Allows for more accurate positioning of sprinklers, Allows circumvention of obstacles in tough terrain such as trees, rocks, and other barriers, Flexible tubing for easy installation of sprinklers RAIN BIRD CORP