Loading ...

Loading ...

Search in: Sprinklers Category

Voltage: 24 VAC, 50/60 Hz Solenoid, Material: Plastic, Valve Type: Anti-Siphon, Operating Pressure: 15 to 150 psi, Flow Range: 0.2 to 30 gpm, Operating Temperature (Ambient Temperature): 125°F, Operating Temperature (Minimum Water and Ambient Air Temperature: 40°F, Operating Temperature (Water Temperature): 110°F, Valve Inlet/Outlet Configuration: NPT Female x NPT Female Threaded, Valve Size: 1", Center of Inlet to Center of Outlet: 4.47", Dimensions LxWxDxH: 7.6" x 3" x3" x 6.1", Valve Series: JTV Anti-Siphon (above ground) mounting, 1 in. female threaded inlet and outlet (use 1 in. MPT threaded pipe adapters with Teflon tape), Jar-Top bonnet simplifies cleaning and maintenance, Flow control allows adjusting flow to the zone, optimizing sprinkler performance, 24 VAC, 50/60 Hz automatic operation or manual activation with bleed screw, Buna-N diaphragm offers superior performance in harsh water environments, External bleed to manually flush system of dirt and debris prior to installation and system start-up, Spray-free internal bleed for manual operation, Energy efficient, low power encapsulated solenoid with captured plunger for long lasting dependability, Heavy duty construction with stainless steel screws, Electrical Specifications:, Inrush - .30 amp, Holding - .19 amp
SB-TEE.jpg1/2" Barb x 1/2" Barb x 1/2" Barb Tee
Locke Part #: S0298MFG Part #: A46004 Compare
Pricing Category: SR07, Stock or OAN: s, Temperature: Up to 110° F, Operating Pressure: Up to 80 psi Fittings are made of robust acetal material to make connecting swing pipe fast and easy., Easy twist-in insertion - no glue or clamps needed for installation., Aggressive barb lip makes a secure connection that is less likely to leak., Broad range of shapes and sizes allow the contractor to choose the best fitting for the application., Extended length and aggressive barb lip prevent blow outs, reducing likelihood of contractor call backs.
XBS500P.jpg1/2" Tubing, 500 Foot Coil with Purple Striping
Locke Part #: S0398MFG Part #: X35412 Compare
Pricing Category: SR02, Stock or OAN: s, Length: 500’, Pressure: 0 to 60 psi, Outside Diameter: 0.705", Inside Diameter: 0.615", Wall Thickness: 0.045", Description2: PURPLE STRIPE TUBING High quality, flexible tubing for use in any low-volume irrigation system, 1/2" blank tubing extruded from polyethylene resin materials for consistent durability., UV-resistant for installations at or below grade., Available in green or purple stripe patterns to differentiate zones., Compatible with Easy Fit Compression Fittings or standard 700 series compression fittings., Compact coils for easy storage and shipping.
MBNL225.jpg1-1/4" No-Lead Brass Pitless Adapter 300#
Locke Part #: S0066MFG Part #: MBNL225 Compare
0 - 100 psi.
15-VAN.jpg10 to 12 feet Variable Arc Spray Nozzles
Locke Part #: S0444MFG Part #: P1001201 Compare
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: VARIABLE ARC NOZZLE, Radius: 10 to 12 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
1804-PRS.jpg12 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0406MFG Part #: A44305 Compare
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 16", Description2: ONLY 12" POP-UP HEIGHT, Spacing: 3 to 24 feet, Exposed Surface Diameter: 2-1/4" Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets
1804-PRS.jpg12 inch Pop-Up Spray Head with PRS
Locke Part #: S0417MFG Part #: A50405 Compare
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 16", Description2: ONLY W/PRS 12" POP-UP, Spacing: 2.5 to 24 feet, Exposed Surface Diameter: 2-1/4", Optional Feature: 30psi in-stem pressure regulation PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets.
Pricing Category: SR04, Stock or OAN: s, Pressure: 25 to 70 psi, Body: 16", Description2: ONLY W/SAM/PRS 12" POPU, Spacing: 3 to 20 feet, Exposed Surface Diameter: 2-1/4" PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money. Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.50 gpm (0.11 m3/h; 1.80 l/m) otherwise, Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Built-in Seal-A-Matic (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site., Even stronger retract spring to accommodate elevation changes up to 14 feet (4,2 m). One of the strongest springs in the industry., Co-molded, pressure-activated, multi-functional wiper seal assures positive seal without excess flow-by which enables more heads to be installed on the same valve., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life. Designed for use with all Rain Bird spray head nozzles., Designed for use with all Rain Bird plastic spray head nozzles., 1/2 (15/21) female threaded inlet
15-VAN.jpg12 to 15 feet Variable Arc Spray Nozzles
Locke Part #: S0450MFG Part #: P1001501 Compare
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: VARIABLE ARC NOZZLE, Radius: 12 to 15 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Pricing Category: SR03, Stock or OAN: s, Height: 1", Pressure: 10 to 60 psi, Inlet: 1/2-inch female threaded, Flow: 1.0 to 2.3 gpm, Spacing: 1 to 3 feet, Top Diameter: 1" UL Listed for direct burial in earth and concrete, it can be used with rebar, water pipe, copper tubing and ground rods up to 2 inch in diameter.
15-VAN.jpg14 to 18 feet Variable Arc Spray Nozzles
Locke Part #: S0452MFG Part #: P10018 Compare
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: VARIABLE ARC NOZZLE, Radius: 14 to 18 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Adjustable Arc, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Quarter Circle, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi (1 to 2,1 bar), Description2: CIRCLE NOZZLE, Spacing: 5 to 15 feet (1,8 to 4,6), Optimum Pressure: 30 psi (2,1 bar) Additional orifice for close-in watering. Minimizes dry spots around spray heads, Low scheduling coefficient for efficient watering, Fine mesh screen protects bottom orifice from debris, Stainless steel adjustment screw to adjust flow and radius, Five year trade warranty, Fits all Rain Bird sprinklers and shrub adapters
S0245.jpg17 ft. Shrub Nozzle - Center Strip Pattern
Locke Part #: S0249MFG Part #: A17-CST Compare
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Specialty, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Full Circle, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Specifications: 1/2" Female Pipe Connection, Nozzle Pattern: Half Circle, Nozzle Type: Fixed Spray, Nozzle Radius: 15 ft, Nozzle Size: A17 Adjustment screw regulates distance of throw for spacing from 6 to 15 feet apart, Matched Flow Rate nozzle assures uniform watering when different patterns are mixed on the same zone, Mounts above ground on a riser tall enough to clear shrubs and tall plantings, Seven assembled patterns: Full, Half, Quarter, End Strip, Center Strip, Side Strip and Adjustable Pattern, The shrubbery Spray Head with the Patented Adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. - no tools needed, Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles
Sprinkler Cable.jpg18/8 Sprinkler Cable, 1000’ Spool
Locke Part #: P2234MFG Part #: 18-08SOL Irrigation Compare
Voltage: 30, Length (ft): 1000, Conductors: 8, Gauge (AWG): 18
Pop-Up Height: 2-1/2", Dimensions (Body Height): 4-1/2", Nozzle Pattern: Full Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series, Spray Distance: 8’-15’ 2 1/2 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed full-circle pattern (360 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
Pop-Up Height: 2-1/2", Dimensions (Body Height): 4-1/2", Nozzle Pattern: Half Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series, Spray Distance: 8’-15’ 2 1/2 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed half-circle pattern (180 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
Pop-Up Height: 2-1/2", Dimensions (Body Height): 4-1/2", Nozzle Pattern: Square, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series, Spray Distance: 14’ x 14’ - 23’ x 23’
Color: Blue, Pricing Category: SR06, Stock or OAN: s, Overall Height: 9-3/10”, Pressure: 25 to 60 psi, Description2: SPRINKLER/2045A08NP, Nozzle Size: 08, Flow: 1.5 to 8.4 gpm, Spacing: 22 to 50 feet, Top Diameter: 5”, LA Nozzles: 07LA, 10LA, Precipitation Rate: 0.18 to 0.79 inches per hour (5 to 20 mm/h), Radius: 22 to 45 feet Proven impact drive., Straight-through flow for superior performance in dirty water. Five interchangeable, color-coded MPR nozzles with standard trajectory., Two interchangeable low angle (LA) nozzles., Easy to adjust, easy to service., No tools required to change nozzles., Heavy-duty plastic case with sturdy, reinforced ribbed design. Double-weighted arm for slower rotation and increased distance of throw., Self-flushing inner trip with improved inner trip lever. Powerful reverse action., Adjustable arm spring for low-pressure and low-gallonage operation., Energy efficient, low pressure and low-gallonage operation. 360 Full-circle OR arc adjustable from 20 to 340 ., Precision Jet tube (PJ ) minimizes side splash.Hooded bearing for longer life., Distance control diffuser pin., Multi-function, pressure-activated wiper seal., Inlet filter screen and pressure-activated wiper seal protect internal assembly from debris to ensure positive pop-up and retraction., Combination 1/2" (15/21) or 3/4" (20/27) bottom inlet.Heavy-duty, stainless steel retract spring assures positive sprinkler pop-down., FP trip for full- or part-circle operation., Side or combination bottom inlet for design flexibility. Side inlet installation is not recommended in freezing climates., Serviceable through the top of the case., Optional internal Seal-A-Matic (SAM) prevents puddling and erosion caused by low head drainage and saves water., Optional nonpotable cover., Combination 1/2 (15/2 1) or 3/4 (20/2 7) female bottom inlet, 1/2 (15/21) female side inlet, Nozzle outlet trajectory is 23, LA nozzle outlet trajectory is 11, Side inlet installation is not recommended in freezing climates, Optional SAM feature holds back up to 10 feet (3,1 m) of elevation change
33DK.jpg3/4" NPT Double Lug Valve Key
Locke Part #: S0421MFG Part #: B11801 Compare
Size: 3/4", Pricing Category: SR09, Stock or OAN: s, Description2: LUG Key threads into top of quick-coupling valve to provide water access. Available with 3/4double lug assembly with NPT threads.
Size: 3/4", Pricing Category: SR09, Stock or OAN: s, Description2: VALVE RUBBER COVER Industrial-strength brass quick-coupling valves for convenient water access., Strong corrosion-resistant stainless steel spring prevents leakage., Thermoplastic cover for durability., Red brass construction for long life and rugged performance. One-piece body design
100.jpg3/4" Straight Valve, Rising Swivel, Red Brass
Locke Part #: M1513MFG Part #: 100RS-075Y Compare
15-VAN.jpg3 to 4 feet Variable Arc Spray Nozzles
Locke Part #: S0453MFG Part #: P10004 Compare
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: ARC NOZZLE, Radius: 3 to 4 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
pumps-2.jpg30" Sprinkler Control Valve Key
Locke Part #: T0223MFG Part #: 30-30 Compare
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Center Strip, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed center strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
S0229.jpg4" Sure-Pop Spray Head - End Strip Pattern Nozzle
Locke Part #: S0229MFG Part #: SP40-EST Compare
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: End Strip, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed end strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Full Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed full-circle pattern (360 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Half Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed half-circle pattern (180 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Quarter Circle, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in pop-up sprinkler head helps to clear obstacles for watering, Pre-installed quarter-circle pattern (90 Degree) nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
S0231.jpg4" Sure-Pop Spray Head - Side Strip Pattern Nozzle
Locke Part #: S0231MFG Part #: SP40-SST Compare
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Side Strip, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed side strip pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
S0228.jpg4" Sure-Pop Spray Head - Square Pattern Nozzle
Locke Part #: S0228MFG Part #: SP40-SQ Compare
Pop-Up Height: 4", Dimensions (Body Height): 6", Nozzle Pattern: Square, Nozzle Type: Fixed Spray, Spray Head Series: SurePop Series 4 in. pop-up sprinkler head helps to clear obstacles for watering, Pre-installed square pattern nozzle, Directional adjustment feature allows you to aim the spray pattern by hand, Covers up to 450 sq. ft. Low-pressure operation, Heavy-duty stainless-steel spring helps to ensure flush retraction, Plastic base material, Retracts into the lawn when not in operation, Stem seal helps keep debris out and helps prevent pressure loss, Pressure-activated, co-molded wiper seal helps prevent water leakage
1804-PRS.jpg4 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0451MFG Part #: A44120 Compare
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 6", Description2: ONLY 4" POP-UP HEIGHT, Spacing: 3 to 24 feet, Exposed Surface Diameter: 2-1/4" Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets
1804-PRS.jpg4 inch Pop-Up Spray Head with PRS
Locke Part #: S0412MFG Part #: A50205 Compare
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 6", Description2: ONLY W/PRS 4" POP-UP, Spacing: 2.5 to 24 feet, Exposed Surface Diameter: 2-1/4", Optional Feature: 30psi in-stem pressure regulation PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets.
Pricing Category: SR04, Stock or OAN: s, Pressure: 25 to 70 psi, Body: 6", Description2: ONLY W/SAM/PRS 4" POPUP, Spacing: 3 to 20 feet, Exposed Surface Diameter: 2-1/4" PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money. Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.50 gpm (0.11 m3/h; 1.80 l/m) otherwise, Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Built-in Seal-A-Matic (SAM) check valve. Eliminates the need for under-the-head check valves. No parts to be installed at the site., Even stronger retract spring to accommodate elevation changes up to 14 feet (4,2 m). One of the strongest springs in the industry., Co-molded, pressure-activated, multi-functional wiper seal assures positive seal without excess flow-by which enables more heads to be installed on the same valve., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life. Designed for use with all Rain Bird spray head nozzles., Designed for use with all Rain Bird plastic spray head nozzles., 1/2 (15/21) female threaded inlet
15-VAN.jpg4 to 6 feet Variable Arc Spray Nozzles
Locke Part #: S0459MFG Part #: P10006 Compare
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: ARC NOZZLE, Radius: 4 to 6 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
5004FC.jpg5004 Non-Reversing Full Circle Rotor, 4" Pop-Up
Locke Part #: S0454MFG Part #: Y54017 Compare
Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “FC” for 360 degree only, Description2: ROTOR POP-UP SPRINKLER, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “PC” for 40-360 degrees, Description2: FULL CIRCLE ROTOR POPUP, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
Model: Plus, Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “PC” for 40-360 degrees, Description2: FULL CIRCLE ROTOR POPUP, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
Model: Plus, Pricing Category: SR06, Stock or OAN: s, Pressure: 25-65 psi, Body: 7-3/8", Rotation: “PC” for 40-360 degrees, Description2: ROTOR, Flow: 0.73 to 9.63 gpm, Precipitation Rate: 0.20 to 1.01 inches per hour, Radius: 25 to 50 feet, Exposed Surface Diameter: 1-5/8" Rain Curtain Nozzles standard on all 5000 Series Rotors, Large water droplets for greater wind resistance, Effective close-in watering, Even distribution over the entire radius, Tree of nozzles including four low angle (angle of trajectory 10 ) and eight standard angle Rain Curtain Nozzles (angle of trajectory 25 ) provides 25' to 50' (7.6m to 15.2m) distance of throw, Self-aligning nozzles, Slip clutch mechanism for quick adjustment on installation, Faster maintenance with a new self-cleaning arc adjustment screw, The 5000 Plus features a flow shut-off device to stop the flow of water to a particular head while the system is still in operation, Top-adjust arc adjustment requiring only a flathead screwdriver, Radius adjustment screw allows up to 25% radius reduction without changing nozzles, 5000 in 4", 6" and 12" available in shrub or in stainless steel, 5000 Series 4" and 6" models available in stainless steel, Award-winning MPR nozzle set simplifies design and installation by providing matched precipitation from 25' to 35' (7.6 to 10.7m), Standard rubber cover for extra protection. 5000 Plus Series features a green cover while the 5000 Series features a black cover, 40-360 arc rotation and reversing full-circle rotation in one. (A non-reversing full-circle only unit is also available), True 4" (10 cm), 6" (15.2 cm) and 12" (30.5 cm) pop-up (measured from the cover to the nozzle, Heavy-duty cover assembly for extra durability in residential or commercial applications, Heavy-duty retract spring assures positive pop-down, Pressure-activated multi-function wiper seal protects internals from debris and assures positive pop-up and retraction, Additional O-rings and seals for extra protection in "gritty" water, Radius may be reduced up to 25% with radius reduction screw, 3/4" (20/27) NPT female bottom threaded inlet, Reversing full and part circle adjustment 40 360, Full circle only adjustment 360
pumps-2.jpg54"n Sprinkler Control Valve Key
Locke Part #: T0224MFG Part #: 30-54 Compare
1804-PRS.jpg6 inch Pop-Up Spray Head Sprinklers
Locke Part #: S0405MFG Part #: A44205 Compare
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 9-3/8", Description2: ONLY 6" POP-UP HEIGHT, Spacing: 3 to 24 feet, Exposed Surface Diameter: 2-1/4" Strong stainless steel spring provides reliable stem retraction., Two piece ratchet mechanism on all models allows easy nozzle pattern alignment without tools and provides added durability.., Pre-installed orange 1800 Pop-Top flush plug blocks debris from entering after flushing. Allows for easy nozzle installation., Constructed of time-proven UV-resistant plastic and corrosion resistant stainless steel parts, assuring long product life., All sprinkler components are removable from the top without special tools, providing for quick and easy flushing and maintenance of the sprinkler. Installation: side or bottom inlet., Side and bottom inlets featured on 1806 and 1812 models. 1806 units do not have a side inlet. Side inlet installation not recommended in freezing climates., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.10 gpm (0.02 m3/h; 0.36 l/m otherwise., 1/2" (15/21) NPT female threaded inlets
1804-PRS.jpg6 inch Pop-Up Spray Head with PRS
Locke Part #: S0415MFG Part #: A50305 Compare
Pricing Category: SR04, Stock or OAN: s, Pressure: 15 to 70 psi, Body: 9-3/8", Description2: ONLY W/PRS 6" POP-UP, Spacing: 2.5 to 24 feet, Exposed Surface Diameter: 2-1/4", Optional Feature: 30psi in-stem pressure regulation PATENTED PRS pressure regulator built into the stem. No parts to be installed at the site. Saves time and money., Maintains constant outlet pressure at 30psi (2.1 bar). Spray nozzles perform best at 30psi. Ensures maximum nozzle performance, even with varying inlet pressures. Maintains constant pressure regardless of nozzles used., Restricts water loss by up to 70% if nozzle is removed or damaged. Saves water and money. Reduces possibility of accidents and property damage. Recommended for vandal-prone areas., Ensures consistent performance throughout zone if nozzle is removed or damaged. Keeps plant life covered by other spray heads properly irrigated., Ends misting and fogging caused by high pressure. Stops water waste. Ensures necessary watering occurs in high pressure or wind conditions., Designed for use with all Rain Bird plastic spray head nozzles., PRS stamped on cap for easy identification and maintenance., Five-year trade warranty., Regulates nozzle pressure to an average 30 psi (2.1 bar) with inlet pressures of up to 70 psi (4.8 bar)., Flow-by: 0 at 8 psi (0.6 bar) or greater; 0.1 gpm (0.02 m3/h; 0.006 l/s) otherwise., Installation: side or bottom inlet., Side inlet installation not recommended in freezing climates., 1/2" (15/21) female threaded inlets.
15-VAN.jpg6 to 8 feet Variable Arc Spray Nozzles
Locke Part #: S0463MFG Part #: P10008 Compare
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: ARC NOZZLE, Radius: 6 to 8 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
1800EXT.jpg6-1/2" Plastic Extension for Spray Head Models
Locke Part #: S0411MFG Part #: A44500 Compare
Size: 6-1/2", Pricing Category: SR07, Stock or OAN: s, Description2: EXTENSION UV-resistant thermoplastic construction for long life., Fits all Rain Bird spray heads and nozzles. Exception: Cannot be used with bubblers., Easily installed without any tools., Can be reinstalled without damaging the threads if accidentally knocked off the riser or spray head., Maximum recommended number: two extensions per sprinkler.
15-VAN.jpg8 to 10 feet Variable Arc Spray Nozzles
Locke Part #: S0440MFG Part #: P1001001 Compare
Pricing Category: SR03, Stock or OAN: s, Pressure: 15 to 30 psi, Description2: NOZZLE, Radius: 8 to 10 feet, Optimum Pressure: 30 psi Easy arc adjustment from 0 to 360 for 10-, 12-, 15-, and 18-VAN; 0 to 330 for 4-, 6- and 8-VAN., The textured base and collar are easy to grip, even when wet., A physical left edge indicator makes it easier to feel the fixed left edge., No special tools required. A small twist of the center collar increases or decreases arc setting., Stainless steel adjustment screw to adjust flow and radius., "Captured" screw slot prevents screwdriver slippage during adjustment., Ideal for watering odd-shaped areas., Blue filter screen (.02" x .02") (shipped with nozzles) maintains precise radius adjustment and prevents clogging., 12, 15, and 18-VAN have matched precipitation rates with Rain Bird MPR nozzles., Quickly identify radius with Top Color-coded nozzles. Top Color-coding makes it easy to verify proper nozzle installation, even when system is not operating., Fits all Rain Bird sprinklers and shrub adapters.
61235 Dryconn Black Gray.jpgBlack/Gray- Outdoor/Irrigation
Locke Part #: S0305MFG Part #: 61241 Compare
Outdoor Unit
61135 Dryconn black white.jpgBlack/White- Outdoor/Irrigation
Locke Part #: S0304MFG Part #: 61135 Compare
S0217.jpgBrass Impact Sprinkler, 1/2" Male Inlet
Locke Part #: S0217MFG Part #: 25PJDA-C Compare
Material: Brass, Inlet: 1/2" Male, Specifications: Spacing up to 50 feet Apart--High Gallonage Output, Coverage Arc: Full/Part Circle, Coverage Radius: 20-41 ft, Features: ADJ Distance Control Diffuser Pin, PJ Precision Jet Tube Traditional favorite with classic impact sound, Straight through water flow design for superior dirty water performance, Easy to install and adjust, Brass, bronze, and stainless steel construction lasts longer than competitors' zinc sprinklers, Adjustable deflector flap adjusts stream length from 20-foot (6 m) to 41-foot (12.5 m) radius, Diffuser screw breaks water into smaller water droplets for uniform watering, Die-cast, white bronze PJ spray arm controls stream, prevents side splash onto buildings and walkways
This specially designed Concealed, Sprinkler Wrench quickly and easily, allows access to service Flat Plate, (RFC) Concealed Sprinklers
K-Factor: 4.9 The Recessed Pendent Sprinkler, threads onto Uponor s Fire Sprinkler, Adapter Fitting. Sprinklers are NSFand, UL-approved for combined, plumbing and fire sprinkler systems., Sprinklers designated LF are also NSF, Annex G compliant.
K-Factor: 4.3 The Concealed Sprinkler Assembly, comes with the sprinkler threaded onto, Uponor s stainless-steel multi-port, fitting with ProPEX outlets. All, assemblies come complete with a, plastic protective cap and cup., Sprinkler assemblies are NSF- and, UL-approved for combined plumbing, and fire sprinkler systems.
10600 King 6 blue.jpgKing 6 Blue Direct Bury
Locke Part #: S0303MFG Part #: 10666 Compare
LF74971FW.jpgLF RC-RES (162°F) Flat Concealed Sprinkler
Locke Part #: R1791MFG Part #: LF4970FC Compare
The Flat Concealed Sprinkler threads, onto Uponor s Fire Sprinkler Adapter, Fitting. All sprinklers come complete, with a plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems. Sprinklers, designated LF are also NSF Annex G, compliant.
Pricing Category: SR03, Stock or OAN: s, Height: 1", Pressure: 20 to 90 psi, Description2: COMPENSATING BUBBLER, Flow: 0.50 gpm, Spacing: 1 to 3 feet, Top Diameter: 1" Low flow rates allow water to be absorbed as needed., Reduces runoff., Flow will not fluctuate at pressures between 20 and 90 psi., Maintains even flow., Flow is not adjustable for increased vandal resistance., No adjustment required., Corrosion-proof plastic and rubber construction for long life., Shipped with special SR-050 1/2" (15/21) bubbler filter screen for easy installation and resistance to debris., 1/2" (15/21) female threaded inlet
Pricing Category: SR03, Stock or OAN: s, Height: 1", Pressure: 20 to 90 psi, Description2: COMPENSATING BUBBLER, Flow: 1.00 gpm, Spacing: 1 to 3 feet, Top Diameter: 1" Low flow rates allow water to be absorbed as needed., Reduces runoff., Flow will not fluctuate at pressures between 20 and 90 psi., Maintains even flow., Flow is not adjustable for increased vandal resistance., No adjustment required., Corrosion-proof plastic and rubber construction for long life., Shipped with special SR-050 1/2" (15/21) bubbler filter screen for easy installation and resistance to debris., 1/2" (15/21) female threaded inlet
Q7500200.jpgRecessed Sprinkler Wrench
Locke Part #: R1991MFG Part #: Q7500200 Compare
These specially designed Recessed, Sprinkler Wrenches quickly and easily, allow access to service Recessed, Pendent and LF Horizontal Sidewall, Sprinklers.
lf74300br.jpgRFC43 (165°F) Flat Concealed Sprinkler
Locke Part #: R1984MFG Part #: Q74300BR Compare
K-Factor: 4.3 The Concealed Sprinkler threads onto, Uponor s Fire Sprinkler Adapter Fitting., All sprinklers come complete with a, plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems.
lf74300br.jpgRFC49 (165°F) Flat Concealed Sprinkler
Locke Part #: R1985MFG Part #: Q74900FC Compare
K-Factor: 4.9 The Concealed Sprinkler threads onto, Uponor s Fire Sprinkler Adapter Fitting., All sprinklers come complete with a, plastic protective cap and cup., Sprinklers are NSF- and UL-approved, for combined plumbing and fire, sprinkler systems.
20101 Tan Low Voltage.jpgTan Low Voltage
Locke Part #: S0302MFG Part #: 20111 Compare
The Test Orifice is used with the In-line, Flow Test Kit. Use the appropriate, orifice, as sprinklers vary in orifice, size.
S0399.jpgXF Dripline - 0.6 GPH, 18" Spacing, 500’ Coil
Locke Part #: S0399MFG Part #: X44012 Compare
Flow Rate: 0.6 gph, Length: 500 ft., Application: On Surface, Tubing Diameter: 1/2", Outside Diameter: 0.634", Inside Diameter: 0.536", Operating Pressure: 8.5 to 60 psi, Wall Thickness: 0.049", Features: Extra Flexible, Emitter Spacing: 18", Operating Range Required Filtration: 120 mesh, Operating Range Temperature (Ambient): 125°F, Operating Range Temperature (Water): 100°F XF Dripline - 0.6 GPH, 18 in. Spacing, 500 ft. Coil, Unique material offers significantly greater flexibility, allowing tighter turns with fewer elbows for easier installation, Choice of flow rates, spacing and coil lengths provides design flexibility for a variety of non-turfgrass applications, Accepts Rain Bird Easy Fit Compression Fittings, XF Dripline Insert Fittings and 17mm insert fittings, Use an Air/Vacuum Relief Valve Kit when installation is below soil, The pressure-compensating emitter design provides a consistent flow over the entire lateral length ensuring higher uniformity for increased reliability in the pressure range of 8.5 to 60 psi, Dual-layered tubing (brown over black) provides unmatched resistance to chemicals, algae growth and UV damage