Loading ...

Search in: hole saws Category

1-1/2" Carbide Grit Hole Saw
Locke Part #: T1139 MFG Part #: 625.2416
MAG-BIT
1-1/2" Carbide Tipped Hole Cutter
Locke Part #: T1127 MFG Part #: 626.2416
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
1-1/4" Carbide Tipped Hole Cutter
Locke Part #: T1125 MFG Part #: 626.2016
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1-1/8" Carbide Grit Hole Saws 1-3/8" Depth
Locke Part #: T1137 MFG Part #: 625-1816
Diameters 3/4" through 4-1/8", Works in rotary and SDS Hammer mode, Works forward and reverse, Use standard or SDS shank arbors, Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster., Concrete pavers., Drill a hole through cement takes less than 7 seconds. MAG-BIT
1-1/8" Carbide Tipped Hole Cutter
Locke Part #: T1124 MFG Part #: 626-1816
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
1-3/16" - 6-3/8" Hole Saw
Locke Part #: T3113 MFG Part #: EL5000
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
1-3/4" Carbide Grit Hole Saw
Locke Part #: T1140 MFG Part #: 625.2816
MAG-BIT
1-3/4" Carbide Tipped Hole Cutter
Locke Part #: T1128 MFG Part #: 626.2816
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1-3/8" Carbide Grit Hole Saw
Locke Part #: T1138 MFG Part #: 625.2216
MAG-BIT
1-3/8" Carbide Tipped Hole Cutter
Locke Part #: T1126 MFG Part #: 626-2216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
1/4" Carbide Tipped Pilot Bit
Locke Part #: T0929 MFG Part #: 626.9015B
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
2" - 8-1/4" Hole Saw
Locke Part #: T3115 MFG Part #: EL6000
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
2" Carbide Grit Hole Saw
Locke Part #: T1141 MFG Part #: 625.3216
MAG-BIT
2" Carbide Tipped Hole Cutter
Locke Part #: T1129 MFG Part #: 626.3216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
2-1/2" Carbide Grit Hole Saw
Locke Part #: T1143 MFG Part #: 625.4016
MAG-BIT
2-1/2" Carbide Tipped Hole Cutter
Locke Part #: T1131 MFG Part #: 626.4016
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
2-1/4" Carbide Grit Hole Saws 1-3/8" Depth
Locke Part #: T1142 MFG Part #: 625.3616
Diameters 3/4" through 4-1/8", Works in rotary and SDS Hammer mode, Works forward and reverse, Use standard or SDS shank arbors, Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster., Concrete pavers., Drill a hole through cement takes less than 7 seconds. MAG-BIT
2-5/8" Carbide Tipped Hole Cutter
Locke Part #: T1132 MFG Part #: 626.4216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
3" Carbide Grit Hole Saw
Locke Part #: T1144 MFG Part #: 625.4816
MAG-BIT
3" Carbide Tipped Hole Cutter
Locke Part #: T1133 MFG Part #: 626.4816
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
3-5/8" Carbide Grit Hole Saw
Locke Part #: T1145 MFG Part #: 625.5816
MAG-BIT
3/4" Carbide Grit Hole Saws 1-3/8" Depth
Locke Part #: T1135 MFG Part #: 625.1216
Diameters 3/4" through 4-1/8", Works in rotary and SDS Hammer mode, Works forward and reverse, Use standard or SDS shank arbors, Cuts brick, concrete block, fiber cement siding & backer board, stucco, old plaster., Concrete pavers., Drill a hole through cement takes less than 7 seconds. MAG-BIT
3/4" Carbide Tipped Hole Cutter
Locke Part #: T1122 MFG Part #: 626.1216
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
Bi-Metal,Tough 3/16" Thick Back Plate, 1-3/4" Depth cuts through 2" x 4" in one easy pass, For improved chip removal., 4/6 Variable Pitch Tooth combination, reduces vibration, Increases productivity Deep Gullet design MAG-BIT
5-1/4" Bi-Metal Hole Saw
Locke Part #: T1148 MFG Part #: 624.8416
MAG-BIT
625 Carbide Grit Hole Saws Plumber's Kit
Locke Part #: T1147 MFG Part #: 625.9308
Contains, 1 each: 3/4", 7/8", 1-1/8", 1-1/2", 1-3/4", 2-1/4", Arbors:, 1/4" hex, 7/16" quick change, 1/4" pilot bit MAG-BIT
7/8" Carbide Tipped Hole Cutter
Locke Part #: T1123 MFG Part #: 626-1416
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. MAG-BIT
High carbide tipped steel, Fish eye hole for pulling wire, Packaged / Bulk program available Carbide tipped masonry drills., Drills for boring masonry fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling MAG-BIT
High carbide tipped steel, Fish eye hole for pulling wire, Packaged / Bulk program available Carbide tipped masonry drills., Drills for boring masonry fishing wires. Fish eye hole provided near tip of flutes to aid pulling wire after completion of drilling MAG-BIT
Carbide Tipped Hole Cutter Kit
Locke Part #: T1134 MFG Part #: 626.KIT1
Cuts sheet metal, stainless steel, iron, cast iron, copper, abrasive materials such as high density resin and metal plate. Cuts up to 3/16" deep. Over 300 holes in stainless steel plate. Auto ejecting slug. Contains 1 each: 7/8",, 1-1/8", 1-3/8", TCT hole cutter spare pilot bit, ejector spring and hex wrench. Cutters in the kit provide conduit entry for 1/2", 3/4" and 1" conduit. MAG-BIT
Electricians Carbide Grit Hole Saw Kit
Locke Part #: T1146 MFG Part #: 625.9108
Contains 1 each: 7/8", 1-1/8", 1-3/8", 1-3/4", 2", 2-1/2". Arbors: 7/16" hex, 7/16" quick change, 1/4" pilot bit. MAG-BIT
Pilot Drill Bit
Locke Part #: T3126 MFG Part #: EL5001
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
Plumbers Kit
Locke Part #: T1370 MFG Part #: D180001 V
Includes:, 3/4", 7/8", 1-1/8", 1-1/2",, 1-3/4", 2-1/4", Optimized tooth design for superior performance while cutting metal, M3 steel provides longer life than the M2 steel of the industry standard product, Hardened backing plates prevent warping thus allowing for easier removal from the mandrel, Versatility of Deep Cut style allows users to cut either wood or metal DEWALT
Ruler Axle for T3113
Locke Part #: T3114 MFG Part #: EL5003
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING
Ruler Axle for T3115
Locke Part #: T3119 MFG Part #: EL6003
Can cut drywall, plywood, plaster & acrylic sheeting up to, 7/8", thick (1-3/4" thick if opposite side can also be drilled.), For cutting aluminum, brass and metal sheets up to 1/16 thick., Transparent cowl prevents chips from injuring user., Can work with either variable speed hand drill or drill press. ELCO LIGHTING