Bathroom Categories

Loading ...

Loading ...

Search in: Bathroom Category

C1807.jpg0.5 - 1.0 gpf Washout Top Spud Urinal
Locke Part #: C1807MFG Part #: 6581.001.020 MAYBROOK Compare
3/4" top inlet spud, outlet spud with 1-1/2" tubing tailpiece AMERICAN STANDARD
C1843.jpg0.5 GPF F/W Urinal
Locke Part #: C1843MFG Part #: 6042.005.020 Compare
3/4-Inch Top Spud Urinal 0.5 Gpf AMERICAN STANDARD
C1842.jpg0.5-1.0 GPF Urinal
Locke Part #: C1842MFG Part #: 6550.001.020 Compare
3/4" Top Spud White .125gpf - 1.0 Gpf AMERICAN STANDARD
Dimensions (Height x Width x Depth): 10-1/8" x 14-5/8" x 7-1/4", Discharge Pipe Diameter (in): 1", Discharge Rate at Max Height (gpm): 18, Electrical Supply (V): 115, Horizontal Discharge (ft): 150, Horsepower: 0.3, Maximum Temperature (°F): 140, Min Gravity Fall on Horizontal Run: 1/4" per foot, Motor Speed (RPM): 3600, Vertical Discharge (ft): 16 The perfect quiet solution to install a kitchen or sink anywhere you never thought possible., Ideal for heavy-duty residential and commercial applications, Pre-assembled system with low inlets and built-in check valves., Small enough to fit inside a kitchen cabinet with the capability to handle hot water and grease buildup., 1 Discharge, 1-1/2 Vent, Connect to shower, bathtub or sink SFA SANIFLO
Dimensions (Height x Width x Depth): 8-3/4" x 9" x 10-1/4", Discharge Pipe Diameter (in): 1", Discharge Rate at Max Height (gpm): 18, Electrical Supply (V): 115, Horizontal Discharge (ft): 140, Horsepower: 0.3, Maximum Temperature (°F): 140, Min Gravity Fall on Horizontal Run: 1/4" per foot, Motor Speed (RPM): 3600, Vertical Discharge (ft): 14 Comprises of a pressure switch and circuit board assembly, which starts and stops the unit, and the motor, which drives the pump., Moving parts are kept to an absolute minimum., The unit pumps the effluent upward to 14 feet and/or 140 feet horizontally (with gravity fall)., The waste water from other sanitary fixtures is discharged into the Saniswift via two 1-1/2 inch inlets., A vent connection on the lid., Highly recommended for the gray water pump to be connected to a Ground Fault Interrupter (GFI) circuit., A compact unit with attractive rounded contours that fits neatly into tight spaces., Certified to American and Canadian Standards. Electrical standard UL 788, CA: Electrical standard CSA C22.2,, The Saniswift comes with the pump case only. SFA SANIFLO
Dimensions (Height x Width x Depth): 15-3/4" x 14-1/2" x 18-1/4", Discharge Pipe Diameter (in): 1", Discharge Rate at Max Height (gpm): 13, Electrical Supply (V): 115, Horizontal Discharge (ft): 100, Horsepower: 0.3, Maximum Temperature (°F): 95, Min Gravity Fall on Horizontal Run: 1/4" per foot, Motor Speed (RPM): 3600, Vertical Discharge (ft): 9, Water Consumption (gallons): 1 A newly designed toilet with built-in macerator for green conscious users that want to save water., Standard dual flush version uses 1.28 gallons per flush (4.8 lpf) and 1 gallon per flush (3.8 lpf)., A toilet that s ideal for tight spots where conventional toilets can t fit and for people with physical limitations requiring easy access to a toilet., This toilet was created for situations where there is not enough space., As a toilet that uses a minimum amount of water., As a toilet for use with people that have physical limitations. 4 Litres (1.1 gallon) of water per flush., 1 Discharge, Connect to a sink SFA SANIFLO
C0484.jpg1"
Locke Part #: C0485MFG Part #: 3308853 Compare
KISSLER & CO
A1098.jpg1" Diverter for D0289
Locke Part #: A1098MFG Part #: A0011 Compare
LUXURY LINE FAUCETS & PARTS
C0165.jpg1" Kit
Locke Part #: C0167MFG Part #: 3308782 Compare
Sloan Valve Co
C0494.jpg1" Royal Stop Chrome Plated
Locke Part #: C0494MFG Part #: 3308386 Compare
Sloan Valve Co
C0491.jpg1" Royal Stop Nut Cap
Locke Part #: C0491MFG Part #: 3308840 Compare
Sloan Valve Co
C0498.jpg1" Valve Cap
Locke Part #: C0498MFG Part #: 3308772 Compare
Sloan Valve Co
M1115.jpg1" x 1429" PTFET Thread Tape
Locke Part #: M1117MFG Part #: 70887 Compare
A new, thicker, professional-grade, Monstrous roll (1429"), Seals threads in more applications, No need for pipe dope., Easier to use - no waste!, All purpose - use on iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. Mill Rose Company
C0165.jpg1" x 6" Kit
Locke Part #: C0165MFG Part #: 3308785 Compare
Sloan Valve Co
A0443.jpg1/2" Diverter Spout
Locke Part #: A0443MFG Part #: A100012CP Compare
1/2 female thread. 5-1/8 from wall. LUXURY LINE FAUCETS & PARTS
A0491.jpg1/2" FIP Swivel Ell
Locke Part #: A0491MFG Part #: 613-57X Compare
1/2" Swivel tub spout ell. No soldering. Designed for 1 piece tub/shower units. Sioux Chief Mfg
S8-12A F_STD.jpg1/2" FIP X 1/2" FIP 12" FAUCET
Locke Part #: B0212MFG Part #: S8-12A F Compare
Size: 1/2” F.I.P x 1/2" F.I.P, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008868
S8-16A F_STD.jpg1/2" FIP X 1/2" FIP 16" FAUCET
Locke Part #: B0213MFG Part #: S8-16A F Compare
Size: 1/2” F.I.P x 1/2" F.I.P, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008882
S8-20A F_STD.jpg1/2" FIP X 1/2" FIP 20" FAUCET
Locke Part #: B0214MFG Part #: S8-20A F Compare
Size: 1/2” F.I.P x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.450” ID (0.660” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection,, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, Reinforced PVC inner hose ensures durability, 100% No Lead For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008905
A0453.jpg1/2" FPT x 1/2" FPT Self Closing Shower Valve
Locke Part #: A0453MFG Part #: S05100 Compare
Jones Stephen Cor
A0491.jpg1/2" MIP Swivel Ell
Locke Part #: A0474MFG Part #: 613-57Y Compare
1/2" Swivel tub spout ell. No soldering. Designed for 1 piece tub/shower units. Sioux Chief Mfg
A0465.jpg1/2" Polished chrome spout
Locke Part #: A0465MFG Part #: 82-0014 Compare
KISSLER & CO
A0470.jpg1/2" sweat 90° Ell
Locke Part #: A0470MFG Part #: 613-57 Compare
Connect tub valve to spout nipple in one easy step, 1-1/4 Radius fits all valve rough-ins, Made from 1/2" Type L copper tube Sioux Chief Mfg
A0492.jpg1/2" sweat 90° Ell
Locke Part #: A0492MFG Part #: 612-87 Compare
5/8 OD copper. 8 riser, 5 extension. Furnished complete with throw away test plug and protective rough-in cover. Sioux Chief Mfg
A2185.jpg1/2" x 20
Locke Part #: A2185MFG Part #: 55-0203 Compare
KISSLER & CO
A0332.jpg1/2" x 24
Locke Part #: A0332MFG Part #: 755-0253 Compare
KISSLER & CO
M760.jpg1/2" x 260" Teflon Thread Tape
Locke Part #: M0760MFG Part #: 70190 Compare
Mill Rose Company
A2190.jpg1/2" x 27
Locke Part #: A2190MFG Part #: AB55-0303 Compare
KISSLER & CO
5-1/2" overall length, Adjustment up to 1" to accommodate various rough-ins. Jones Stephen Cor
B0340.jpg1/2" x 3/8" Nut
Locke Part #: B0340MFG Part #: 300-C Compare
GENE RICH
A0435.jpg1/2" x 6" Chrome Shower Arm
Locke Part #: A0435MFG Part #: A020002CP Compare
LUXURY LINE FAUCETS & PARTS
A0435.jpg1/2" x 8" Chrome Shower Arm
Locke Part #: A0436MFG Part #: A020004CP Compare
LUXURY LINE FAUCETS & PARTS
B0340.jpg1/2" x 9/16" Nut
Locke Part #: B0342MFG Part #: 303-C Compare
GENE RICH
Product Image Not Available1/2 Flare x 7/8 Ballcock Nut 12 in
Locke Part #: B0322MFG Part #: BF3-12DL F Compare
Size: 1/2" Flare x 7/8" Ballcock x 12” Length, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613966595
BF3-20A F_INL.jpg1/2 in Flare x 1/2 FIP 20 in
Locke Part #: B0321MFG Part #: BF3-20A F Compare
Size: 1/2” Flare x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, No Lead, For use in potable water distribution systems in accessible locations only. BrassCraft Mfg Co 26613966724
Size: 1/2” Compression x 7/8” Ballcock, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613966823
Oatey SCS
These flush valves also have a metal cover to protect from vandalism. Sloan Valve Co
C0528.jpg1 GPF Optima Hard Wire Closet Flush Valve
Locke Part #: C0528MFG Part #: 3772683 Compare
Requires, B0535, 24V transformer to operate. Sloan Valve Co
C0295.jpg1-1/2", 1.5 Gallon
Locke Part #: C0164MFG Part #: 3080053 Compare
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0295.jpg1-1/2", 3.5 Gallon
Locke Part #: C0295MFG Part #: 3080153 Compare
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0194.jpg1-1/2" ADA, 1.5 Gallon
Locke Part #: C0196MFG Part #: 3010000 Compare
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0194.jpg1-1/2" ADA, 3.5 Gallon
Locke Part #: C0194MFG Part #: 3010100 Compare
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0432.jpg1-1/2" Vac Breaker Spud Coupling
Locke Part #: C0434MFG Part #: 0306146 Compare
Sloan Valve Co
B0277.jpg1-1/4" "J" Bend
Locke Part #: B0277MFG Part #: 130X Compare
Gauge: 22GA Less clean out J B PRODUCTS/ALLEN DIVISION
B0262.jpg1-1/4" "P" Trap
Locke Part #: B0264MFG Part #: 100 Compare
Gauge: 20GA Chrome plated. J B PRODUCTS/ALLEN DIVISION
B0262.jpg1-1/4" "P" Trap
Locke Part #: B0270MFG Part #: 100X Compare
Gauge: 22GA Chrome plated. J B PRODUCTS/ALLEN DIVISION
B0262.jpg1-1/4" "P" Trap
Locke Part #: B0271MFG Part #: 101 Compare
Gauge: 17GA Chrome plated. J B PRODUCTS/ALLEN DIVISION
C0189.jpg1-1/4" ADA, 1.5 gpf
Locke Part #: C0189MFG Part #: 3012426 Compare
Flush Connection, Coupling for 1-1/4" Top Spud. With Flanges. Sloan Valve Co
B0357.jpg1-1/4" Chrome
Locke Part #: B0357MFG Part #: 448 Compare
J B PRODUCTS/ALLEN DIVISION
B0290.jpg1-1/4" PVC "P" Trap
Locke Part #: B0290MFG Part #: 813PVCBG Compare
J B PRODUCTS/ALLEN DIVISION
C0295.jpg1-1/4" Regal Flush Valve, 1.5 Gallon
Locke Part #: C0294MFG Part #: 3082442 Compare
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
B0275.jpg1-1/4" Repair "P" Trap
Locke Part #: B0275MFG Part #: 108 Compare
Gauge: 20GA J B PRODUCTS/ALLEN DIVISION
B0262.jpg1-1/4" Semi-Cast
Locke Part #: B0263MFG Part #: 150CO Compare
Gauge: 17GA Chrome plated. J B PRODUCTS/ALLEN DIVISION
C0432.jpg1-1/4" Vac Breaker Spud Coupling
Locke Part #: C0433MFG Part #: 0306140 Compare
Sloan Valve Co
B0262.jpg1-1/4" with Clean Out
Locke Part #: B0262MFG Part #: 101CO Compare
Gauge: 17GA Chrome plated. J B PRODUCTS/ALLEN DIVISION
B0354.jpg1-1/4" x 12" Chrome
Locke Part #: B0354MFG Part #: 813 Compare
J B PRODUCTS/ALLEN DIVISION
B0276.jpg1-1/4" x 20-1/2" "S" Trap
Locke Part #: B0276MFG Part #: 116X Compare
Gauge: 22GA J B PRODUCTS/ALLEN DIVISION
B0356.jpg1-1/4" x 45° Chrome
Locke Part #: B0356MFG Part #: 452 Compare
J B PRODUCTS/ALLEN DIVISION
C3604.jpg1.0 GPF Automatic Flush Valve
Locke Part #: C3604MFG Part #: 6063.101.002 Compare
Self-cleaning piston helps prevent clogging and reduces maintenance, Stadium Flush valve delivers short flush every 2 minutes during periods of high use, Safety Timer helps prevent vandalism by shutting the valve off if sensor is covered for more than 60 seconds, Fully Mechanical Manual Override - allows valve to flush during a power failure, Fail-Safe Operation - valve automatically closes on loss of power or water pressure, Automatically flushes after 24 hours of nonuse to maintain trap seal, ADA, compliant, For use with 3/4" top spud urinals, 11-1/2" Rough-In AMERICAN STANDARD
C3602.jpg1.28 GPF Auto Flush Valve
Locke Part #: C3602MFG Part #: 6065121.002 Compare
DC Powered (battery included) For use with wall or floor-mounted bowls with 1-1/2" top spud Includes inlet sweat solder kit 11-1/2" Rough-In AMERICAN STANDARD
C1713.jpg1.28 Gpf Linen Tank
Locke Part #: C1738MFG Part #: 4188A.104.222 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
Battery, powered closet flush valves have an over ride button to operate valve manually. These flush valves have a metal cover to protect from vandalism. Sloan Valve Co
C0526.jpg1.5 GPF Optima Hard Wire Closet Flush Valve
Locke Part #: C0527MFG Part #: 3450047 Compare
Requires, B535, 24V transformer to operate. Sloan Valve Co
Exclusive, Self Cleaning Piston-Operated Flush Valves w/ Proximity Operation and Mechanical Manual Override, DC (Battery) Powered (Battery Included), Water, Pressure Range, from 20 to 125 PSI, Recommended Working pressure Range from 25 PSI (Flowing) - 80 PSI (Static), Range Can Be Adjusted Manually, or with Optional Remote Control, All Flush Valves Include Sweat Holder Kit, 11-1/2" Rough-In, Battery, Included, Can be Installed Right or Left Handed, Meets the Americans with Disabilities Act Guidelines and ANSI A117.1 Requirements for Accessible and Usable Building Facilities AMERICAN STANDARD
C1713.jpg10" R/ 11.28 Tank White
Locke Part #: C1727MFG Part #: 4188B.104.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg10" R/i 1.28 Tank RH TR
Locke Part #: C1717MFG Part #: 4188B.105.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg10" R/I 1.6 Tank
Locke Part #: C1720MFG Part #: 4188B.004.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
Color: White, Size: 2", Weight: 0.833 lbs, Material: PVC Plastic Designed for use with preformed shower stall bases., Oatey Offset Shower Drains with Receptor Base are designed for use with preformed shower stall bases., The drain is solvent welded to 2 Schedule 40 DWV pipe and allows a 1.5 margin of error., Drain top accommodates 4-1/4 Universal Snap-Tite Strainers available in a variety of designer finishes., Made of PVC, Offset design allows for margin of error when roughing in a shower base., Sealing and friction gaskets allow for positive seal to the shower base. Oatey SCS 038753427874
C0672.jpg12" Braided Stainless Steel Faucet Connector
Locke Part #: C0672MFG Part #: 0 3996110012 2 Compare
3/8" Female Compression Thread x 1/2" I.P. Female Straight Thread Fluidmaster Inc
040711_clip.jpg12" Braided Stainless Steel Toilet Connector
Locke Part #: C0671MFG Part #: 0 39961 41186 0 Compare
Durable metal nut won t crack when tightening., Metal nut toiler connector provides durable, professional installation., Use with PRO45B brass shank fill valve for maximum durability, Braided stainless steel lengths Fluidmaster Inc
B0279.jpg12" Plug/One Piece
Locke Part #: B0280MFG Part #: 1042B Compare
J B PRODUCTS/ALLEN DIVISION
C1713.jpg12" R/I 1.28 Tank RH TR
Locke Part #: C1716MFG Part #: 4188A.105.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg12" R/I Tank 1.28
Locke Part #: C1714MFG Part #: 4188A.104.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg12" R/I Tank 1.6
Locke Part #: C1713MFG Part #: 4188A.004.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
B0347.jpg12" x 1-1/4" Extension
Locke Part #: B0350MFG Part #: 442-12 Compare
Chrome plated J B PRODUCTS/ALLEN DIVISION
Sloan Valve Co
Sloan Valve Co
M1898.jpg13" x 13" x 6" Tub box
Locke Part #: M1898MFG Part #: 34080 Compare
Quick, economical and clean. Manufactured from semi-flexible, very durable, plastic polymer. Built in cut-out for up to 2 Schedule 40 drain. Oatey SCS
Product Image Not Available15’ Tiling Flange
Locke Part #: A0185MFG Part #: 15' TILING FLNG Compare
AMERICAN ACRYLIC & INJECTION
Traditional style and durability., Full-length magnetic door latch, Minimum 3-1/2" width adjustability with in-line panel, For right-side or left-side opening STERLING PLUMBING GROUP, INC
Length: 16", Fitting Size: 3/8" Compression x 7/8" Ballcock, Case Dimension Inch: 5 x 8.25 x 16.75 Durable metal nut won t crack when tightening., Metal nut toiler connector provides durable, professional installation., Use with PRO45B brass shank fill valve for maximum durability, Braided stainless steel lengths Fluidmaster Inc 0 39961 41187 7
Color: Oak, Size: 16" x 5" x 20", Sell Pack: 1, Case Qty: 1, Pallet Qty: 16, Unit Weight: 12.4000 lbs North American oak - honey oak finish, Solid oak frames, Genuine oak veneer sides over plywood, Oak overlay interiors, Surface mount, Single door RSI HOME PRODUCTS SALES INC 8-02062-41914-7
Color: White, Size: 16" x 5.75" x 26", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 14.6000 lbs High gloss, snow white finish, Plywood side panels, Laminated interiors, Surface mount, Single door HARDWARE HOUSE 8-02062-41920-8
C1713.jpg16.5 Height ADA Bowl White
Locke Part #: C1744MFG Part #: 3517A. 101.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
C1713.jpg16.5 Height Round Front Bowl
Locke Part #: C1740MFG Part #: 3517B.101.020 Compare
The Cadet Flushing System, Vitreous china, PowerWash rim scrubs bowl with each flush, Robust metal trip lever & fill valve shank, EverClean surface included, Oversized 3" flush valve, Fully-glazed 2-1/8" trapway, Generous 9" x 8" water surface area, Chrome finish trip lever is supplied, 1,000g MaP Score at 1.6 gpf, 5 year warranty, Nominal Dimensions:, 30-1/8" x 17-3/8" x 28-7/8" AMERICAN STANDARD
030_EXTENNTION_PIPE.jpg18" Extension Pipe Between Toilet and Macerator, White
Locke Part #: C3013MFG Part #: 030 EXTENNTION PIPE Compare
Length: 18", Diameter of pipe (smaller end): 4", Diameter of bell housing (Large end): 5" Designed with the idea to reduce time when installing our macerators, Hide macerating pump behind the wall, Elegant and quiet installation option SFA SANIFLO
C0500.jpg18" S.S. Grab Bar
Locke Part #: C0500MFG Part #: RW2015SS Compare
BETTER ENTERPRISE CO LTD
41-9754.jpg18" x 16" 1 Door Aspen Vanity Cabinet, White
Locke Part #: B1165MFG Part #: C14118A Compare
Color: White, Size: 18" x 16" x 31.5", Sell Pack: 1, Case Qty: 1, Pallet Qty: 16, Unit Weight: 27.7000 lbs High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 1 door RSI HOME PRODUCTS SALES INC 8-02062-41975-8
41-9606.jpg18" x 16" 1 Door Heritage Vanity Cabinet, Oak
Locke Part #: B1170MFG Part #: C14018A Compare
Color: Oak, Size: 18" x 16" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 12, Unit Weight: 27.5000 lbs North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Self closing hinges, Oak overlay interiors, Cam lock construction - easy assembly, 1 door RSI HOME PRODUCTS SALES INC 8-02062-41960-4
B2806.jpg19" Bone Rondalyn Countertop Sink 4"
Locke Part #: B2807MFG Part #: 0491.019.021 RONDALYN 19 Compare
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 19-1/8" diameter AMERICAN STANDARD
B5030.jpg19" Drop-In Round Lav White China
Locke Part #: B5030MFG Part #: 006-622 Compare
COMPASS MANUFACTURING
B2806.jpg19" Linen Rondalyn Countertop Sink 4"
Locke Part #: B2808MFG Part #: 0491.019.222 RONDALYN 19 Compare
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 19-1/8" diameter AMERICAN STANDARD
Warranty: Vitreous China - Limited Lifetime, Dimensions: 19", Material: Vitreous China, Shipping Weight: 21.6 lbs, Color/Finish: White, Basin: 14-3/4" x 12-1/8", Faucet Hole: 4" 19" Round, self-rimming lavatory, Drop-in Lavatory, Complies with ADA requirements for accessibility, Available with single hole, 4" or 8" faucet centers, Faucet and faucet assembly not included, The Mansfield limited lifetime warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Concealed front overflow, Made in USA MANSFIELD PLUMBING PRODUCTS
B2806.jpg19" White Rondalyn Countertop Sink 4"
Locke Part #: B2806MFG Part #: 0491.019.020 RONDALYN 19 Compare
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 19-1/8" diameter AMERICAN STANDARD
Color: Solid White, Size: 19" x 31", Pallet Qty: 8, Unit Weight: 33.0000 lbs HARDWARE HOUSE 6-04300-04000-3
Color: Solid White, Size: 19" x 37", Pallet Qty: 8, Unit Weight: 42.0000 lbs HARDWARE HOUSE 6-04300-05000-2
Color: White/White, Size: 19" x 17", Pallet Qty: 16, Unit Weight: 20.0000 lbs HARDWARE HOUSE 6-04300-01002-0
217.jpg19-3/4" x 16" Oval, Under Counter Lavatory, Biscuit Color
Locke Part #: B0071MFG Part #: 217 BISCUIT USA Compare
Warranty: Vitreous China - Limited Lifetime, Material: Vitreous China, Shipping Weight: 18 lbs, Color/Finish: Biscuit, Basin: 17-5/16" x 14-1/8", Outside Dimensions: 19-3/4" x 16", Inside Dimensions: 17-5/16" x 14-1/8" Oval, under counter lavatory, Under counter installation, Complies with ADA requirements for accessibility, Concealed Front Overflow, Mansfield Limited Lifetime Warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards MANSFIELD PLUMBING PRODUCTS
Warranty: Vitreous China - Limited Lifetime, Material: Vitreous China, Shipping Weight: 18 lbs, Color/Finish: White, Basin: 17-5/16" x 14-1/8", Outside Dimensions: 19-3/4" x 16", Inside Dimensions: 17-5/16" x 14-1/8" Oval, under counter lavatory, Under counter installation, Complies with ADA requirements for accessibility, Concealed Front Overflow, Mansfield Limited Lifetime Warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards MANSFIELD PLUMBING PRODUCTS
A0482.jpg2" Caulk type drain
Locke Part #: A0482MFG Part #: 67040 Compare
For Fiberglass shower stall. 4-1/4 stainless steel strainer. 2" connection. IPS Corporation
A0484.jpg2" Chrome Self Seal Drain
Locke Part #: A0484MFG Part #: A484 Compare
For use on steel, fiberglass & plastic shower bases. Fits 2" schedule 40 pipe. PVC with Stainless Steel grid.a BETTER ENTERPRISE CO LTD
C0260.jpg2" Diameter For Urinals
Locke Part #: C0263MFG Part #: 90260 Compare
Oatey SCS
R2985.jpg2" Drain Gasket
Locke Part #: R2988MFG Part #: 2WSDG-1 Compare
With an extension of over 3-1/2" downward and 4" upward, you will rarely have to disturb the floor or plumbing. It's designed with all of, the classic problems in mind. WILLBURN SPECIALTY PRODUCTS EN
Size: 2” drain w/ SS strainer (101TPT2) Designed for prefab shower stalls, Snap in stainless steel strainer, 4-1/4" O.D. strainer, Fits 2 Schedule 40 plastic or cast iron pipe, Can be adapted to no-caulk with gasket Jones Stephen Cor
A0459.jpg2" PVC white shower drain
Locke Part #: A0459MFG Part #: A459 Compare
With above floor tightening gasket. AMERICAN ACRYLIC & INJECTION
d60102.jpg2" Shower and Floor Drain 2" FIP
Locke Part #: A0477MFG Part #: D60102 Compare
Size: 2" FIP, Pan: 6-1/5", Strainer: SS Tongue and groove cast iron bolt down clamping ring, Weep holes on both top and bottom for secondary drainage Jones Stephen Cor
Size: 2" Inside Caulk, Pan: 6-1/2", Strainer: SS Tongue and groove cast iron bolt down clamping ring, Weep holes on both top and bottom for secondary drainage, Can be used with gasket to make unit no-caulk Jones Stephen Cor
R2985.jpg2" Shower Drain Extension With Silver Screen
Locke Part #: R2986MFG Part #: 2SDE-1 Compare
With an extension of over 3-1/2" downward and 4" upward, you will rarely have to disturb the floor or plumbing. It's designed with all of, the classic problems in mind. WILLBURN SPECIALTY PRODUCTS EN
Finish: Stainless, Flow Rate: 2.50 gpm @ 80 psi, 9.5 L/min @ 550 kPa, Description Ext.: CLEAN RAINCAN STAINLESS, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: RP52382SS, DELTA FAUCET Description: Delta: Single-Setting Shower Head, Case Quantity: 1, Series: Universal Showering Components, Shower Head Length: 2″, Shower Head Diameter: 8-3/4″ Touch Clean Raincan Shower Head, Spray Settings-, Full Body Spray, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
Finish: Chrome, Flow Rate: 2.50 gpm @ 80 psi, 9.5 L/min @ 550 kPa, Description Ext.: CLEAN RAINCAN CHROME, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: RP52382, DELTA FAUCET Description: Delta: Single-Setting Shower Head, Case Quantity: 1, Series: Universal Showering Components, Shower Head Length: 2″, Shower Head Diameter: 8-3/4″ Touch Clean Raincan Shower Head, Spray Settings-, Full Body Spray, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
Finish: Venetian Bronze, Flow Rate: 2.50 gpm @ 80 psi, 9.5 L/min @ 550 kPa, Description Ext.: CLEAN RAINCAN VEN BRONZ, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: RP52382RB, DELTA FAUCET Description: Delta: Single-Setting Shower Head, Case Quantity: 1, Series: Universal Showering Components, Shower Head Length: 2″, Shower Head Diameter: 8-3/4″ Touch Clean Raincan Shower Head, Spray Settings-, Full Body Spray, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
A0481.jpg2"-3" PVC Chrome Grid
Locke Part #: A0481MFG Part #: 840-2P Compare
Fits over 2" or inside 3" schedule 40 pipe. 4-1/4 dia. SS strainer included. Sioux Chief Mfg
A2512.jpg2 Handle Lever T/S Chrome
Locke Part #: A2512MFG Part #: 3275.502.002 Compare
Diverter tub spout, Exclusive handle alignment system, Great for prolonged contact with water., Durable brass construction, Ceramic disc valving assures drip-free life performance AMERICAN STANDARD
A1255.jpg2 Piece White 36" Shower
Locke Part #: A1255MFG Part #: 13632P-WH Compare
2 piece molded sectional shower, BathLock front installation system, Designed to hide seam; Integral soap shelf, Slip resistant, textured bottom; Center drain Aquatic Co
A1258.jpg2 Piece White 48" Shower
Locke Part #: A1258MFG Part #: 14832P-WH Compare
2 piece molded sectional shower, BathLock front installation system, 2 comfort molded shower seats, Specifically designed to hide seam; Centerdrain, Slip resistant, textured bottom; Integralsoap shelf Aquatic Co
A0551.jpg2 Valve Chrome shower only
Locke Part #: A0552MFG Part #: TQ-F2010507CP Compare
Acrylic handles and water-saver shower head. 1/2" IPS connection. LUXURY LINE FAUCETS & PARTS
C0429.jpg2-1/16" Tail assembly
Locke Part #: C0429MFG Part #: 0308801 Compare
Sloan Valve Co
Warranty: Gelcoat - 3 Year Limited, Solid Surface - 10 Year Limited, Color: Biscuit, Finish  : Gelcoat, Load Factor   : 1, Standards: ANSI 124.2, UPC, Type  : 1-Piece, Dimension (W x H x D) : 48-1/4" x 75-3/4" x 37", Hardware Included   : Soap Dishes, Two Molded Seat, No of Seat     : 2, Wall Type: Smooth Praxis Companies
Color: Biscuit, Drain Option: Center, Finish  : Gelcoat, Load Factor   : 1, Standards: ANSI 124.1, UPC, Type  : 3-Piece, Residential, Dimension (W x H x D) : 48" x 73" x 36.125", Hardware Included   : Soap Dishes and Two Molded Seats, No of Seat     : 2, Wall Type: Smooth Praxis Companies
C0672.jpg20" Braided Stainless Steel Faucet Connector
Locke Part #: C0669MFG Part #: 0 39961 10020 7 Compare
3/8" Female Compression Thread x 1/2" I.P. Female Straight Thread Fluidmaster Inc
Length: 20", Fitting Size: 3/8" Compression x 7/8" Ballcock, Case Dimension Inch: 5 x 8.25 x 16.75 Durable metal nut won t crack when tightening., Metal nut toiler connector provides durable, professional installation., Use with PRO45B brass shank fill valve for maximum durability, Braided stainless steel lengths Fluidmaster Inc 0 39961 41188 4
B2800.jpg20" x 17" Bone Aqualyn Countertop Sink 4"
Locke Part #: B2801MFG Part #: 0476.028.021 AQUALYN OVA Compare
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
B5030.jpg20" x 17" Drop-In Oval White China
Locke Part #: B5020MFG Part #: 006-623 Compare
COMPASS MANUFACTURING
B2800.jpg20" x 17" Linen Aqualyn Countertop Sink 4"
Locke Part #: B2802MFG Part #: 0476.028.222 AQUALYN OVA Compare
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
Warranty: Vitreous China - Limited Lifetime, Dimensions: 20" x 17", Material: Vitreous China, Shipping Weight: 24.2 lbs, Color/Finish: White, Basin: 15-1/2" x 10-1/2", Faucet Hole: 4" Oval, self-rimming lavatory, Drop-In Lavatory, Complies with ADA requirements for accessibility, Concealed front overflow, Available in single hole, 4" or 8" faucet centers, The Mansfield limited lifetime warranty, Faucet and faucet assembly not included, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards MANSFIELD PLUMBING PRODUCTS
B2800.jpg20" x 17" White Aqualyn Countertop Sink 4"
Locke Part #: B2800MFG Part #: 0476.028.020 AQUALYN Compare
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
B2800.jpg20" x 17" White Aqualyn Countertop Sink 8"
Locke Part #: B2803MFG Part #: 0475.020.020 AQUALYN OVA Compare
Vitreous China, Tappered edges for style, Self-rimming oval countertop sink, Front overflow, Supplied with cut-out template, Nominal Dimensions: 20-3/8" x 17-3/8" AMERICAN STANDARD
Warranty: Vitreous China - Limited Lifetime, Dimensions: 20" x 27", Material: Vitreous China, Shipping Weight: 50 lbs, Color/Finish: White, Basin: 13-1/4" x 12-3/4", Faucet Hole: 4" Concaved front for wheelchair accessibility, Complies with ADA requirements for accessibility, Available in 4" or 8" faucet centers, also available in less overflow version L/O, Concealed front overflow, Complete with template and instructions, faucet and faucet assembly not included, Compatible Carriers Zurn Z-1251-79, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, The Mansfield limited lifetime warranty, Designed for concealed arm carriers, Made in USA MANSFIELD PLUMBING PRODUCTS
Warranty: Vitreous China - Limited Lifetime, Dimensions: 20" x 27", Material: Vitreous China, Shipping Weight: 50 lbs, Color/Finish: White, Basin: 13-1/4" x 12-3/4", Faucet Hole: 8" Concaved front for wheelchair accessibility, Complies with ADA requirements for accessibility, Available in 4" or 8" faucet centers, also available in less overflow version L/O, Concealed front overflow, Complete with template and instructions, faucet and faucet assembly not included, Compatible Carriers Zurn Z-1251-79, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, The Mansfield limited lifetime warranty, Designed for concealed arm carriers, Made in USA MANSFIELD PLUMBING PRODUCTS
Color: Oak, Size: 21" x 7" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 24.9000 lbs North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Self closing hinges, Oak overlay interiors, Cam lock construction - easy assembly, 2 door/ 1 shelf HARDWARE HOUSE 8-02062-41933-8
Warranty: Vitreous China - Limited Lifetime, Dimensions: 22" W x 18-1/8" D, Material: Vitreous China, Shipping Weight: 37 lbs, Color/Finish: White, Basin: 16" x 10-5/8", Faucet Hole: 4" Full 4" high backsplash, Concealed front overflow, Drilled for concealed arm carrier, Includes hanger, Designed for concealed arm installation, Available in single hole, 4" or 8" faucet centers, Complies with ADA requirements for accessibility, Compatible Carriers Zurn Z1231, Z1251 & Z1253 Series, The Mansfield limited lifetime warranty, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Made in USA MANSFIELD PLUMBING PRODUCTS
C0500.jpg24" S.S. Grab Bar
Locke Part #: C0501MFG Part #: RW2016SS Compare
BETTER ENTERPRISE CO LTD
Aspen_2Door.jpg24" x 18" 2 Door Aspen Vanity Cabinet, White
Locke Part #: B1166MFG Part #: C14124A Compare
Color: White, Size: 24" x 18" x 31.5", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 33.4000 lbs High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 2 door RSI HOME PRODUCTS SALES INC 8-02062-41976-5
Heritage_2Door.jpg24" x 18" 2 Door Heritage Vanity Cabinet, Oak
Locke Part #: B1171MFG Part #: C14024A Compare
Color: Oak, Size: 24" x 18" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 32.8000 lbs North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Self closing hinges, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Oak overlay interiors, Cam lock construction - easy assembly, 2 door RSI HOME PRODUCTS SALES INC 8-02062-41961-1
Color: White, Size: 24" x 5.75" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 25.8000 lbs High gloss, snow white finish, Plywood side panels, Laminated interiors, Surface mount, Double door HARDWARE HOUSE 8-02062-41921-5
Color: Oak, Size: 24" x 5" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 25.8000 lbs North American oak - honey oak finish, Solid oak frames, Genuine oak veneer sides over plywood, Oak overlay interiors, Surface mount, Double door HARDWARE HOUSE 8-02062-41915-4
Warranty: Vitreous China - Limited Lifetime, Material: Vitreous China, Color/Finish: White, Basin: 20-1/2" x 12-3/8", Faucet Hole: 4" 25" x 19" pedestal lavatory, 34-1/4" luxury height, Features a luxurious, deep basin for extra water volume, Available in single, 4" or 8" faucet centers, Order 292 sink, 293 pedestal, Concealed front overflow, Complete with hanger and instructions, Faucet and faucet assembly not included, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Mansfield limited lifetime warranty MANSFIELD PLUMBING PRODUCTS
Warranty: Vitreous China - Limited Lifetime, Material: Vitreous China, Color/Finish: White, Basin: 20-1/2" x 12-3/8", Faucet Hole: 8" 25" x 19" pedestal lavatory, 34-1/4" luxury height, Features a luxurious, deep basin for extra water volume, Available in single, 4" or 8" faucet centers, Order 292 sink, 293 pedestal, Concealed front overflow, Complete with hanger and instructions, Faucet and faucet assembly not included, Meets or exceeds ASME A112.19.2-2008/CSA B45.1-08 standards, Mansfield limited lifetime warranty MANSFIELD PLUMBING PRODUCTS
640X.jpg3" Chrome Plated Die Cast Zinc Spout Extension
Locke Part #: A0347MFG Part #: 640-X Compare
Size: 3" GENE RICH
Size: 3" or 4", Weight: 0.750 LB, Quantity: 24, Solubility in Water: Insoluble, Appearance & Color: Soft amber to brown color, Melting Point (°F): 140° to 170°F, Specific Gravity (H2O = 1): .82 to .86, Vapor Pressure (mm Hg): 0.01 Soft and flexible high-grade petroleum wax rings., Features clean-release tray., Available in a variety of sizes and combo packs., Meets Federal Specification TTP-1536A. Oatey SCS
R2985.jpg3" Shower Drain Extension Silver Pearl
Locke Part #: R2987MFG Part #: 3SDE-1 Compare
With an extension of over 3-1/2" downward and 4" upward, you will rarely have to disturb the floor or plumbing. It's designed with all of, the classic problems in mind. WILLBURN SPECIALTY PRODUCTS EN
IF333.jpg3" Street Adjustable Closet Flange PVC
Locke Part #: R0931MFG Part #: C50306 Compare
Ideal for repair or replacement in wood or concrete construction., Extended length to reach riser below existing floor height., Makes repair jobs faster and easier. Jones Stephen Cor
R0931.jpg3" x 4" Adjustable Closet Flange 4" Adjustment
Locke Part #: R2992MFG Part #: C53700 Compare
Ideal for repair or replacement in wood or concrete construction., Extended length to reach riser below existing floor height., Makes repair jobs faster and easier. Jones Stephen Cor
R0992.jpg3" x 4" Flush Fit Metal Swivel Flange
Locke Part #: R0993MFG Part #: 884-PTM Compare
Sioux Chief Mfg
R0992.jpg3" x 4" Flush Fit Standard Flange
Locke Part #: R0992MFG Part #: 883-PT Compare
Sioux Chief Mfg
C0266.jpg3"-4" Horn Kit
Locke Part #: C0269MFG Part #: 90234 Compare
Oatey SCS
C0266.jpg3"-4" Wax w/ Horn
Locke Part #: C0267MFG Part #: 90241 Compare
Oatey SCS
C0484.jpg3/4"
Locke Part #: C0484MFG Part #: 3308856 Compare
KISSLER & CO
C0194.jpg3/4" ADA, 1 Gallon
Locke Part #: C0199MFG Part #: 3012636 Compare
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0194.jpg3/4" ADA, 1.5 Gallon
Locke Part #: C0193MFG Part #: 3012600 Compare
Vacuum breaker flush connection, coupling for top spud. Wall and spud flanges., Dual filtered by-/pass, Protected by-pass orifice, Synthetic rubber diaphragm, High back pressure vacuum breaker, Triple seal handle, Vandal resistant free spinning stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0165.jpg3/4" Kit
Locke Part #: C0168MFG Part #: 3308788 H636-AA Compare
Sloan Valve Co
C0295.jpg3/4" Regal Flush Valve, 1.5 Gallon
Locke Part #: C0293MFG Part #: 3082653 Compare
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0295.jpg3/4" Regal Low Consumption, 1 Gal. Flush Cycle
Locke Part #: C0297MFG Part #: 3082675 Compare
Vacuum breaker flush connection, coupling for 1-1/2" top spud. Wall and spud flanges., Para-flo technology, Vandal resistant locking threaded stop cap, High copper-low zinc brass castings, Non-hold open handle, Fixed metering, By-pass orifice, No external volume adjustment, Ada, compliant handle Sloan Valve Co
C0494.jpg3/4" Royal Stop Chrome Plated
Locke Part #: C0495MFG Part #: 0388025 Compare
Sloan Valve Co
C0520.jpg3/4" Urinal Retro-Fit Kit
Locke Part #: C0522MFG Part #: 3325402 Compare
These flush valves also have a metal cover to protect from vandalism. Sloan Valve Co
C0432.jpg3/4" Vac Breaker Spud Coupling
Locke Part #: C0432MFG Part #: 0306125 Compare
Sloan Valve Co
M1115.jpg3/4" x 1429" PTFET Thread Tape
Locke Part #: M1116MFG Part #: 70886 Compare
A new, thicker, professional-grade, Monstrous roll (1429"), Seals threads in more applications, No need for pipe dope., Easier to use - no waste!, All purpose - use on iron, brass, copper, aluminum, stainless steel, galvanized steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more. Mill Rose Company
M760.jpg3/4" x 520" Teflon Thread Tape
Locke Part #: M0743MFG Part #: 70196 Compare
Mill Rose Company
Model - R11000.jpg3/6 Setting Diverter Rough-In, 6/Case
Locke Part #: A2114MFG Part #: R11000 Compare
Description Ext.: #NAME?, Pricing Category: ADEL, Stock or OAN: s, DELTA FAUCET Model Number: R11000, DELTA FAUCET Description: Delta: 3/6 Setting Diverter Rough, Case Quantity: 6, Series: Other 3-port, 6-setting diverter with 3 individual and 3 shared positions, 2-port, 3-setting diverter with 2 individual and 1 shared position, 1/2" universal inlets/outlets, Cartridge ships with trim, Standard Specifications:, Forged brass body, Can be tested with air (200 psi) or water (300 psi) using supplied test cap, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes: or, for commercial users, for 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1 Delta Faucet Co
S1-12DLM F_INL.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0282MFG Part #: S1-12DLM F Compare
BrassCraft Mfg Co 26613157023
S1-16DLM F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0283MFG Part #: S1-16DLM F Compare
BrassCraft Mfg Co 26613160276
S1-12DL F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0298MFG Part #: S1-12DL F Compare
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613009049
S1-20DL F_STD.jpg3/8" COMP X 7/8" BALLCOCK
Locke Part #: B0302MFG Part #: S1-20DL F Compare
Size: 3/8” Compression x 7/8” Ballcock, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or crimping, Reinforced PVC inner hose ensures durability, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Long wing nuts allow for quick connection and ensure dependable thread engagement, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613009063
S1-12A F_STD.jpg3/8" COMP X FIP, 12" FAUCET
Locke Part #: B0294MFG Part #: S1-12A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008806
S1-16A F_INL.jpg3/8" COMP X FIP, 16" FAUCET
Locke Part #: B0295MFG Part #: S1-16A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 16, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008820
S1-20A F_STD.jpg3/8" COMP X FIP, 20" FAUCET
Locke Part #: B0296MFG Part #: S1-20A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613008844
S1-30A F_STD.jpg3/8 CMP X 1/2 FIP X 30" FAUCET
Locke Part #: B0299MFG Part #: S1-30A F Compare
Size: 3/8” Compression x 1/2" F.I.P, Length (in): 30, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, Reinforced PVC inner hose ensures durability, 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections, 100% No Lead, For use in potable water distribution systems in accessible locations only BrassCraft Mfg Co 26613158730
Product Image Not Available3/8 Flare x 7/8 Ballcock Nut 12 in
Locke Part #: B0318MFG Part #: BF1-12DL F Compare
Size: 3/8" Flare x 7/8" Ballcock x 12” Length, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613966427
Size: 3/8” Flare x 1/2" F.I.P, Length (in): 20, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613966687
S1-20KC F_STD.jpg3/8CMPX3/8CMP 20" FCET KC NOSE
Locke Part #: B0305MFG Part #: S1-20KC F Compare
Size: 3/8” Compression x 3/8" OD Compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613158914
S1-12KC F_STD.jpg3/8CMPX3/8CMPX12" FCET KC NOSE
Locke Part #: B0297MFG Part #: S1-12KC F Compare
Size: 3/8” Compression x 3/8" OD Compression, Length (in): 12, Operating Temperature: 40°- 140° F, intermittent to 180° F, Pressure: 125 psi maximum, Tubing Diameter: 0.300” ID (0.550” OD) Engineered polymer braided fibers bend freely without kinking or Crimping, Reinforced PVC inner hose ensures durability, No Lead, Rubber washers provide a large pliable sealing surface and ensure a long lasting water-tight connection, For use in potable water distribution systems in accessible locations only., 8-sided pneumatic crimp provides greater dependability for realible nut-to-hose connections BrassCraft Mfg Co 26613158907
A1270.jpg3 Piece White 36" Acrylic Shower
Locke Part #: A1270MFG Part #: 36ACTRIO-WH Compare
MUST ORDER BOTH DOOR & JAM, 3 Piece Acrylic molded sectional, BathLock front installation system, Beautiful simulated ceramic tile; Center drain, Designed to hide seams; Integral toiletry shelves Aquatic Co
A1255.jpg3 Piece White 36" Shower
Locke Part #: A1256MFG Part #: 1363TRIO-WH Compare
2 piece molded sectional shower, BathLock front installation system, Designed to hide seam; Integral soap shelf, Slip resistant, textured bottom; Center drain Aquatic Co
A1259.jpg3 Piece White 48" Shower
Locke Part #: A1259MFG Part #: 1483NTRI-WH Compare
BathLock front installation system, Specifically designed to hide seam, 3 piece molded sectional shower; center drain, Slip resistant, textured bottom; integral soap shelf Aquatic Co
A1261.jpg3 Piece White 60" Sectional Shower
Locke Part #: A1261MFG Part #: 16033P-WH Compare
Smooth wall 3 piece molded sectional, BathLock front installation system, Integral soap shelf; Center drain, Designed to hide seams; Comfort corner seats Aquatic Co
A0551.jpg3 Valve Chrome tub/shower
Locke Part #: A0551MFG Part #: F3010505CP Compare
Acrylic handles and water-saver shower head. 1/2" IPS connection. LUXURY LINE FAUCETS & PARTS
C0429.jpg3-1/16" Tail assembly
Locke Part #: C0534MFG Part #: 0308803 Compare
Sloan Valve Co
RP17730.jpg3-Handle Bath Diverter Assembly New Style, 1/Case
Locke Part #: A0746MFG Part #: RP17730 Compare
Description Ext.: NEW STY, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP17730, DELTA FAUCET Description: Delta: Diverter Assembly, Case Quantity: 1, Series: Other Delta Faucet Co
RP10799.jpg3-Handle Bath Diverter Assembly Old Style, 1/Case
Locke Part #: A0742MFG Part #: RP10799 Compare
Description Ext.: OLD STY, Pricing Category: adpt, Stock or OAN: s, DELTA FAUCET Model Number: RP10799, DELTA FAUCET Description: Delta: Diverter Assembly, Case Quantity: 1, Series: Other Delta Faucet Co
Color: Biscuit, Drain Option: Center, Finish  : Gelcoat, Load Factor   : 1, Standards: ANSI Z124.1-2, UPC, Type  : 3-Piece, Residential, Dimension (W x H x D) : 48" x 74" x 35.5", Hardware Included   : Two Molded Soap Ledges, Wall Type: Smooth Praxis Companies
Finish: Stainless, Description Ext.: TRIM STAINLESS, Pricing Category: ADEL, Stock or OAN: s, DELTA FAUCET Model Number: T11800-SS, DELTA FAUCET Description: Delta: 3 Setting Diverter Trim, Case Quantity: 3, Series: Other, Handle: Single Handle Lever For use with R11000 diverter rough-in, Includes valve cartridge, Available in five finishes, ADA Compliant, Standard Specifications:, Three function diverter 2 individual positions, 1 shared position, 1/2" rough-in, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes; or, for commercial users, or 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1, Indicates compliance to ICC/ANSI A117.1 Delta Faucet Co
T11800.jpg3-Setting Diverter Valve Trim, Chrome, 3/Case
Locke Part #: A2115MFG Part #: T11800 Compare
Finish: Chrome, Description Ext.: TRIM CHROME, Pricing Category: ADEL, Stock or OAN: s, DELTA FAUCET Model Number: T11800, DELTA FAUCET Description: Delta: 3 Setting Diverter Trim, Case Quantity: 3, Series: Other, Handle: Single Handle Lever For use with R11000 diverter rough-in, Includes valve cartridge, Available in five finishes, ADA Compliant, Standard Specifications:, Three function diverter 2 individual positions, 1 shared position, 1/2" rough-in, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes; or, for commercial users, or 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1, Indicates compliance to ICC/ANSI A117.1 Delta Faucet Co
Finish: Venetian Bronze, Description Ext.: TRIM VEN BRONZE, Pricing Category: ADEL, Stock or OAN: s, DELTA FAUCET Model Number: T11800-RB, DELTA FAUCET Description: Delta: 3 Setting Diverter Trim, Case Quantity: 3, Series: Other, Handle: Single Handle Lever For use with R11000 diverter rough-in, Includes valve cartridge, Available in five finishes, ADA Compliant, Standard Specifications:, Three function diverter 2 individual positions, 1 shared position, 1/2" rough-in, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes; or, for commercial users, or 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1, Indicates compliance to ICC/ANSI A117.1 Delta Faucet Co
U4923-PK.jpg3-Way Shower Arm Diverter, Chrome, 6/Case
Locke Part #: A0457MFG Part #: U4923-PK Compare
Finish: Chrome, Description Ext.: PER SHWR 4923, Pricing Category: ALU2, Stock or OAN: s, DELTA FAUCET Model Number: U4923-PK, DELTA FAUCET Description: Delta: 3-Way Shower Arm Diverter, Case Quantity: 6, Series: Universal Showering Components Diverts water between hand shower and shower head, Brass construction, One inlet and two outlets, Warranty:, Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects in material and workmanship, 5 Year Limited Warranty for usage in all industrial, commercial and business applications, Complies With:, Indicates compliance to ICC/ANSI A117.1 Delta Faucet Co
Finish: Stainless, Description Ext.: DIVERTER STAINLESS, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: 50650-SS, DELTA FAUCET Description: Delta: 3-Way Shower Arm Diverter For Hand Shower, Case Quantity: 12, Series: Universal Showering Components The design was inspired by a strong presence in nature like that of tree with reaching branches., With a full suite of products including matching accessories, the Linden Bath Collection complements most any bath., Utilizes the MultiChoice Universal rough-in feature - order separately, Dual function Pressure Balance control - Handle adjusts volume - Dial adjusts temperature, Four-setting, In2ition integrated shower head and hand shower, Available in chrome, Venetian Bronze, Brilliance Stainless or Champagne Bronze, Lifetime Faucet and Finish Warranty Delta Faucet Co
Finish: Chrome, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: 50650, DELTA FAUCET Description: Delta: 3-Way Shower Arm Diverter For Hand Shower, Case Quantity: 12, Series: Universal Showering Components The design was inspired by a strong presence in nature like that of tree with reaching branches., With a full suite of products including matching accessories, the Linden Bath Collection complements most any bath., Utilizes the MultiChoice Universal rough-in feature - order separately, Dual function Pressure Balance control - Handle adjusts volume - Dial adjusts temperature, Four-setting, In2ition integrated shower head and hand shower, Available in chrome, Venetian Bronze, Brilliance Stainless or Champagne Bronze, Lifetime Faucet and Finish Warranty Delta Faucet Co
Finish: Venetian Bronze, Description Ext.: DIVERTER RUBBED BRONZE, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: 50650-RB, DELTA FAUCET Description: Delta: 3-Way Shower Arm Diverter For Hand Shower, Case Quantity: 12, Series: Universal Showering Components The design was inspired by a strong presence in nature like that of tree with reaching branches., With a full suite of products including matching accessories, the Linden Bath Collection complements most any bath., Utilizes the MultiChoice Universal rough-in feature - order separately, Dual function Pressure Balance control - Handle adjusts volume - Dial adjusts temperature, Four-setting, In2ition integrated shower head and hand shower, Available in chrome, Venetian Bronze, Brilliance Stainless or Champagne Bronze, Lifetime Faucet and Finish Warranty Delta Faucet Co
Battery, powered closet flush valves have an over ride button to operate valve manually. These flush valves have a metal cover to protect from vandalism. Sloan Valve Co
C0526.jpg3.5 GPF Optima Hard Wire Closet Flush Valve
Locke Part #: C0526MFG Part #: 340147 Compare
Requires, B535, 24V transformer to operate. Sloan Valve Co
Color: White, Size: 30" x 18" x 31.5", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 51.7000 lbs High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 1 door/ 2 drawer HARDWARE HOUSE 8-02062-41979-6
Color: Oak, Size: 30" x 18" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 50.8000 lbs North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Self closing hinges, Oak overlay interiors, Cam lock construction - easy assembly, 1 door/ 2 drawer HARDWARE HOUSE 8-02062-41964-2
Aspen_2Door.jpg30" x 18" 2 Door Aspen Vanity Cabinet, White
Locke Part #: B1167MFG Part #: 41-9788 Compare
Color: White, Size: 30" x 18" x 31.5", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 39.6000 lbs High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 2 door HARDWARE HOUSE 8-02062-41978-9
Heritage_2Door.jpg30" x 18" 2 Door Heritage Vanity Cabinet, Oak
Locke Part #: B1172MFG Part #: C14030A Compare
Color: Oak, Size: 30" x 18" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 38.0000 lbs North American oak & honey oak finish, Solid oak frames, doors & drawer fronts, Self closing hinges, Genuine oak veneer sides over plywood, Dual drawer guides for strength & glide, Solid brass hardware, Oak overlay interiors, Cam lock construction - easy assembly, 2 door RSI HOME PRODUCTS SALES INC 8-02062-41963-5
Color: White, Size: 30" x 21" x 31.5", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 53.9000 lbs High gloss, snow white finish, Ultra density fiberboard doors & drawer fronts, Plywood side panels, Dual drawer guides for strength & glide, Coordinating satin nickel hardware, Self closing hinges, Laminated interiors, Cam lock construction - easy assembly, 1 door/ 2 drawer HARDWARE HOUSE 8-02062-41986-4
Color: White, Size: 30" x 5.75" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 33.6600 lbs HARDWARE HOUSE 8-02062-41922-2
A0037.jpg30" x 60" x 16" Bathtub Left hand drain White
Locke Part #: A0040MFG Part #: BT-1 T6030L WHITE Compare
Veritek is SwanStone's affordable, compression-molded material with no, surface coating to chip or crack. This, non-porous material will not mold or, mildew, so it is perfect for your shower, floor., Natural Gloss surface for easy cleaaning., 16 height is deeper than a standard tub. E L MUSTEE & SONS
A0037.jpg30" x 60" x 16" Bathtub Right hand drain White
Locke Part #: A0037MFG Part #: BT-1 T6030R WHITE Compare
Veritek is SwanStone's affordable, compression-molded material with no, surface coating to chip or crack. This, non-porous material will not mold or, mildew, so it is perfect for your shower, floor., Natural Gloss surface for easy cleaaning., 16 height is deeper than a standard tub. E L MUSTEE & SONS
OVAL.jpg32" x 60" x 19" Oval less apron
Locke Part #: A0190MFG Part #: BR19 Compare
Color: White 3/4 H.P. pump motor, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
A0881.jpg32" x 60" x 72" Shower Walls Tahiti Desert
Locke Part #: A0889MFG Part #: SK326072 050 Compare
Authentic solid surface., A complete kit with everything you need to design your shower: side & back wall panels, corner molding strips, corner soap dishes, adhesive, caulk, and pressure sensitive tape, Wall panels are designed to fit most shower applications with no trimming required, Kit Includes:, Two Side panels, one back panel, two corner molding strips, two corner soap dishes, installation materials and complete installation instructions. SWANSTONE
Warranty: Limited One Year, Color: Biscuit, Water Capacity: 27 gal. (min.) / 45 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed blower, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 59-3/4" x 32" x 19-1/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 46, On/Off Control: Air Switch, Shipping Weight: 134 lbs Rectangular drop-in whirlpool. Replaces standard bathtubs, Variable speed blower produce powerful air streams for a better massage, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, A powerful heating element warms the air before it enters the bathing well., Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Warranty: Limited One Year, Color: White, Water Capacity: 27 gal. (min.) / 45 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed blower, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 59-3/4" x 32" x 19-1/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 46, On/Off Control: Air Switch, Shipping Weight: 134 lbs Rectangular drop-in whirlpool. Replaces standard bathtubs, Variable speed blower produce powerful air streams for a better massage, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, A powerful heating element warms the air before it enters the bathing well., Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Sloan Valve Co
Sloan Valve Co
A0881.jpg34" x 48" x 72" Shower Walls White
Locke Part #: A0884MFG Part #: SK344872 010 Compare
Authentic solid surface., A complete kit with everything you need to design your shower: side & back wall panels, corner molding strips, corner soap dishes, adhesive, caulk, and pressure sensitive tape, Wall panels are designed to fit most shower applications with no trimming required, Kit Includes:, Two Side panels, one back panel, two corner molding strips, two corner soap dishes, installation materials and complete installation instructions. SWANSTONE
Color: Biscuit, Weight: 93, Dimensions (Width x Depth x Height): 36" x 36" x 72", Drain: Center, Drain Diameter/Clearance: 3-1/4, 3/4, Drain Rough-In (from Back Wall): 15-3/4, Drain Rough-In (from Side Wall): 18, Enclosure Opening: 32, Material: Gelcoat, Seat: 1, Skirt Height: 6, Wall Finish: Smooth Aquatic Co
C0500.jpg36" S.S. Grab Bar
Locke Part #: C0502MFG Part #: RW2017SS Compare
BETTER ENTERPRISE CO LTD
Color: Oak, Size: 36" x 5" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 36.0000 lbs HARDWARE HOUSE 8-02062-41917-8
Color: Biscuit, Dimension A: 36", Dimension B: 36", Dimension C: 18", Dimension D: 18", Dimension E: 18", Weight (Lbs): 44, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Color: White, Dimension A: 36", Dimension B: 36", Dimension C: 18", Dimension D: 18", Dimension E: 18", Weight (Lbs): 44, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
A0963.jpg36" x 36" x 73" Natural Door opening: 33" x 65"
Locke Part #: A0964MFG Part #: S-612-18 Compare
Praxis Companies
Size: 36" x 36" x 77-3/4" Praxis Companies
A1271.jpg36" x 36" x 84" White Shower Module
Locke Part #: A1271MFG Part #: 36AC-WH Compare
Shower Module, Lustrous, durable acrylic, Integral dome, Clear acrylic grab bar, Molded toiletry shelves, Center drain location, Must install the pivot door with expander jam Aquatic Co
Color: White, Dimension A: 36", Dimension B: 42", Dimension C: 18", Dimension D: 18", Dimension E: 21", Weight (Lbs): 53, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
OVAL1.jpg36" x 60" x 19" Oval less apron
Locke Part #: A0125MFG Part #: BR-24 BISCUIT Compare
Color: Biscuit 3/4 H.P. pump motor, 6 Jets (4 Regular & 2 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL1.jpg36" x 60" x 19" Oval less apron
Locke Part #: A0192MFG Part #: BR24 Compare
Color: White 3/4 H.P. pump motor, 6 Jets (4 Regular & 2 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL TUB2.jpg36" x 72" Oval Tub
Locke Part #: A0183MFG Part #: BR-43 WHITE Compare
Color: White 68 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
Color: Biscuit, Size: 36" x 72", Capacity: 68 Gallons Rectangular Deck with Oval Bowl 36"x72", End Drain, 68 Gallons, Pre-leveled foam base AMERICAN ACRYLIC & INJECTION
Warranty: Limited One Year, Color: Biscuit, Water Capacity: 32 gal. (min.) / 45 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 5.8 Amp, Single Speed, Single Phase–Pre-mounted, Dimension: 59-3/4″ x 35-3/4″ x 21-1/4″ , Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 6, On/Off Control: Air Switch, Shipping Weight: 140 lbs. Rectangular whirlpool with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Warranty: Limited One Year, Color: White, Water Capacity: 32 gal. (min.) / 45 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 5.8 Amp, Single Speed, Single Phase–Pre-mounted, Dimension: 59-3/4″ x 35-3/4″ x 21-1/4″ , Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 6, On/Off Control: Air Switch, Shipping Weight: 140 lbs. Rectangular whirlpool with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 46 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
A1110.jpg38" Shower with LH grab bar RH Phenolic slat seat White
Locke Part #: A1112MFG Part #: 1363BFS W/RH SEAT & Bars Compare
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Aquatic Co
A1110.jpg38" Shower with LH grab bar White
Locke Part #: A1111MFG Part #: HS738W/LH BARS Compare
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Praxis Companies
A1110.jpg38" Shower with RH grab bar LH Phenolic slat seat White
Locke Part #: A1113MFG Part #: 1363BFS W/LH SEAT & Bars Compare
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Aquatic Co
A1110.jpg38" Shower with RH grab bar White
Locke Part #: A1110MFG Part #: HS738W/RH BARS Compare
With or without seat - Can be recessed for wheel chair roll-in Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for physically handicapped people., Standard unit has 1 " diameter stainless steel wraparound grab bar., Optional fold down seat, either left or right hand, Slip-resistant floor., 1-3/4" curb may be recessed for roll-in installation., May be special ordered in some colors. Praxis Companies
A1117.jpg3pc 60" x 32" Shower RH Drain ADA White
Locke Part #: A1118MFG Part #: HS766B RH WHITE Compare
Easy care gelcoat/fiberglass construction, Textured slip-resistant bottom, Five year warranty on, manufacturing defects,, Approved and accepted by IAPMO, UPC,FHA/HUD Praxis Companies
A1117.jpg3pc. 60" x 32" Shower LH Drain ADA White
Locke Part #: A1117MFG Part #: HS761B LH WHITE Compare
Easy care gelcoat/fiberglass construction, Textured slip-resistant bottom, Five year warranty on, manufacturing defects,, Approved and accepted by IAPMO, UPC,FHA/HUD Praxis Companies
Professional quality washer-less, chrome plated, color coded handles, all brass and copper waterways, NSF approved. LUXURY LINE FAUCETS & PARTS
3-3/4" From Inlet Of Faucet To Outlet, 4" (102mm) Centers, Aerator (B-0199-03), 1-7/16" Clearance Deck To Aerator T&S BRASS & BRONZE WORKS, INC
Up to 3" Adjustment to riser. Compression joint, slides inside 4" cast iron & PVC. Oatey SCS
Literature_HeaderImage-1-2000x550_c.jpg4" DEEP BRASS CLOSET FLANGE
Locke Part #: C0215MFG Part #: 152-001 Compare
Shallow or Deep B&K LLC
B0362.jpg4" Faucet, Chrome
Locke Part #: B0362MFG Part #: F4034201CP Compare
Water saving aerator, brass pop-up, & S.S. ball assembly. Easy install. LUXURY LINE FAUCETS & PARTS
B0501.jpg4" Faucet, Chrome (shown)
Locke Part #: B0501MFG Part #: F5038203CP Compare
LUXURY LINE FAUCETS & PARTS
B0362.jpg4" Faucet, Oil Rubbed Bronze
Locke Part #: B0371MFG Part #: F4034201RL-TBA1 Compare
Water saving aerator, brass pop-up, & S.S. ball assembly. Easy install. LUXURY LINE FAUCETS & PARTS
B0362.jpg4" Faucet, Satin Nickel
Locke Part #: B0370MFG Part #: F4034201NP Compare
Water saving aerator, brass pop-up, & S.S. ball assembly. Easy install. LUXURY LINE FAUCETS & PARTS
B0501.jpg4" Faucet, Satin Nickel
Locke Part #: B0502MFG Part #: F5038203NP Compare
LUXURY LINE FAUCETS & PARTS
B1234.jpg4" Lavatory Faucet Less Pop-Up
Locke Part #: B1233MFG Part #: F4024001CP Compare
Professional quality, washer-less cartridge design, chrome plated, color coded index on handles, all brass and copper waterways. NSF approved. LUXURY LINE FAUCETS & PARTS
B1234.jpg4" Lavatory Faucet With Pop-Up
Locke Part #: B1234MFG Part #: F4024201CP Compare
Professional quality, washer-less cartridge design, chrome plated, color coded index on handles, all brass and copper waterways. NSF approved. LUXURY LINE FAUCETS & PARTS
Literature_HeaderImage-1-2000x550_c.jpg4" SHALLOW BRASS CLOSET FLANGE
Locke Part #: C0214MFG Part #: 152-000 Compare
Shallow or Deep B&K LLC
Size: 4” x 1-1/2” Notched and slotted, Inside caulk connection Jones Stephen Cor
M1899.jpg4" x 16" x 16" Tub box
Locke Part #: M1899MFG Part #: 4X16X16 26 BOX Compare
Easy installation of tub drains. HENDREN PLASTICS
Size: 4” x 2” Notched and slotted, Inside caulk connection Jones Stephen Cor
Size: 4” x 2-1/2” Notched and slotted, Inside caulk connection Jones Stephen Cor
R0933.jpg4" x 3" Flange
Locke Part #: R0933MFG Part #: 4851-2A 4X3" Compare
With adjustable metal ring. Mueller Industries
R0980.jpg4" x 3" Offset Flange
Locke Part #: R0980MFG Part #: 4848-A 4 X 3" Compare
Mueller Industries
R0991.jpg4" x 3" Plastic Two Finger Closet Flange PVC
Locke Part #: R0991MFG Part #: C4743P Compare
Size: 3" x 3", Pipe Size: 3" Flush fit, Patent #: 5,937,450, Will fit oblong horns, Pushes easily into 3" or 4" cast iron or Schedule 40 DWV pipe, ASTM C-564 rubber gasket Jones Stephen Cor
R0933.jpg4" x 4" Flange
Locke Part #: R0934MFG Part #: 4851-2A 4X4" Compare
With adjustable metal ring. Mueller Industries
Size: 4” x 4” Notched and slotted, Inside caulk connection Jones Stephen Cor
G0217.jpg4" x 4" Offset 2" Closet Flange
Locke Part #: G0217MFG Part #: C43440 Compare
Size: 4” x 4” x 2” Inside Caulk Inside caulk connection Jones Stephen Cor
M1899.jpg4" x 8" x 12" Tub box
Locke Part #: M1900MFG Part #: 4X8X12 56 PR BX Compare
Easy installation of tub drains. HENDREN PLASTICS
C0260.jpg4"-Backoutlet Toilets
Locke Part #: C0260MFG Part #: 90270 Compare
Oatey SCS
C0429.jpg4-1/16" Tail assembly
Locke Part #: C0439MFG Part #: 0308805 Compare
Sloan Valve Co
A0484.jpg4-1/4" Pol. Brass Grid Only
Locke Part #: A0489MFG Part #: 69163 Compare
For use on steel, fiberglass & plastic shower bases. Fits 2" schedule 40 pipe. PVC with Stainless Steel grid.a IPS Corporation
M962920-0020A.jpg4-1/4" to 5-1/4" Adjustable Tailpiece, Polished Chrome
Locke Part #: C1862MFG Part #: M964945-0020A Compare
Size: 4-1/4" to 5-1/4", Colors & Finishes: Polished Chrome, Includes: Tailpiece, Nut AMERICAN STANDARD
A2450.jpg4-3/16" Cold Stem with Seat
Locke Part #: A2450MFG Part #: 23-3162C Compare
KISSLER & CO
A2452.jpg4-3/16" Diverter Stem with Seat
Locke Part #: A2452MFG Part #: 23-3314 Compare
KISSLER & CO
A2450.jpg4-3/16" Hot Stem with Seat
Locke Part #: A2451MFG Part #: 23-3162H Compare
KISSLER & CO
C0281.jpg4-3/8" x 2-7/8"
Locke Part #: C0288MFG Part #: G-18 14095 Compare
KIRKHILL MFG CO
A0176.jpg41" x 69" Oval Bowl Drop-In, 82 Gallons, Biscuit Color
Locke Part #: A0177MFG Part #: BR-40 BISCUIT W/P Compare
Color: Biscuit, Size: 41" x 69", Capacity: 82 Gallons Oval Bowl Drop-In (no deck) 41" x 69", End Drain, 82 Gallons, Pre-leveled foam base AMERICAN ACRYLIC & INJECTION
A0176.jpg41" x 69" Oval Bowl Drop-In, 82 Gallons, White Color
Locke Part #: A0176MFG Part #: BR-40 WHT. W/P Compare
Color: White, Size: 41" x 69", Capacity: 82 Gallons Oval Bowl Drop-In (no deck) 41" x 69", End Drain, 82 Gallons, Pre-leveled foam base AMERICAN ACRYLIC & INJECTION
C0500.jpg42" S.S. Grab Bar
Locke Part #: C0503MFG Part #: RW2019SS Compare
BETTER ENTERPRISE CO LTD
Color: Biscuit, Dimension A: 42", Dimension B: 34", Dimension C: 21", Dimension D: 21", Dimension E: 17", Weight (Lbs): 54, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Color: White, Dimension A: 42", Dimension B: 34", Dimension C: 21", Dimension D: 21", Dimension E: 17", Weight (Lbs): 54, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Color: Biscuit, Dimension A: 42", Dimension B: 42", Dimension C: 21", Dimension D: 21", Dimension E: 21", Weight (Lbs): 58, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Color: White, Dimension A: 42", Dimension B: 42", Dimension C: 21", Dimension D: 21", Dimension E: 21", Weight (Lbs): 58, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
RECTANGULAR.jpg42" x 60" x 20" Rectangular less apron
Locke Part #: A0121MFG Part #: BR-37 BISCUIT Compare
Color: Biscuit 1 H.P. pump motor, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
RECTANGULAR.jpg42" x 60" x 20" Rectangular less apron
Locke Part #: A0194MFG Part #: BR37 Compare
Color: White 1 H.P. pump motor, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
ARMREST TUB.jpg42" x 72" Double
Locke Part #: A0184MFG Part #: BRA-45 WHITE Compare
Color: White Armrest 82 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL TUB 1.jpg42" x 72" Oval Tub
Locke Part #: A0122MFG Part #: BR-32 BISCUIT Compare
Color: Biscuit 79 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
OVAL TUB 1.jpg42" x 72" Oval Tub
Locke Part #: A0182MFG Part #: BR-32 WHITE Compare
Color: White 79 Gallons, 8 Jets (4 Regular & 4 Whirley Jets) AMERICAN ACRYLIC & INJECTION
Warranty: Limited One Year, Color: Biscuit, Water Capacity: 42 gal. (min.) / 55 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed blower, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 60" x 42" x 20-1/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 47, On/Off Control: Air Switch, Shipping Weight: 148 lbs. Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 47 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
Warranty: Limited One Year, Color: White, Water Capacity: 42 gal. (min.) / 55 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed blower, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 60" x 42" x 20-1/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 47, On/Off Control: Air Switch, Shipping Weight: 148 lbs. Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 47 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
Warranty: Limited One Year, Color: Biscuit, Water Capacity: 55 gal. (min.) / 80 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed blower, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 71-1/2" x 42" x 19-3/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 54, On/Off Control: Air Switch, Shipping Weight: 130 lbs. Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 54 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Construction- Self-contained, pre-plumbed whirlpool bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
Warranty: Limited One Year, Color: White, Water Capacity: 55 gal. (min.) / 80 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed blower, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 71-1/2" x 42" x 19-3/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 54, On/Off Control: Air Switch, Shipping Weight: 130 lbs. Rectangular shaped whirlpool with oval bathing well, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 54 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Construction- Self-contained, pre-plumbed whirlpool bath, mounted on a pre-leveled base MANSFIELD PLUMBING PRODUCTS
R0910.jpg45° Outlet Closet Flange
Locke Part #: R0910MFG Part #: 889-45PM Compare
Keeps drain line tight to the sub-floor, Solvent welds inside 3" Schedule 40 fitting hub, PVC or ABS connection, Use a 3" 45 fitting for a 3" offset or a 3" street 45 and coupling for a 4" offset, Fits securely in a 4" hole. Drops 1" before angling to accommodate flooring. Sioux Chief Mfg
Color: Biscuit, Dimensions (Width x Depth x Height): 48" x 35" x 72", Drain: Center, Drain Diameter/Clearance: 3-1/4, 3/4, Drain Rough-In (from Back Wall): 15-3/4, Drain Rough-In (from Side Wall): 24, Enclosure Opening: 43-3/4, Material: Gelcoat, Seat: 2, Skirt Height: 6, Wall Finish: Smooth Aquatic Co
Color: White, Dimensions (Width x Depth x Height): 48" x 35" x 72", Drain: Center, Drain Diameter/Clearance: 3-1/4, 3/4, Drain Rough-In (from Back Wall): 15-3/4, Drain Rough-In (from Side Wall): 24, Enclosure Opening: 43-3/4, Material: Gelcoat, Seat: 2, Skirt Height: 6, Wall Finish: Smooth Aquatic Co
C0500.jpg48" S.S. Grab Bar
Locke Part #: C0504MFG Part #: RW2018SS Compare
BETTER ENTERPRISE CO LTD
A1125.jpg48" Shower with LH seat & bars
Locke Part #: A1126MFG Part #: HS771W/LH SEAT Compare
Molded in seat, Slip-resistant floor, One-piece seamless construction, 1-1/2" diameter safety grab bars, Colors available by special order White Praxis Companies
A1125.jpg48" Shower with RH seat & bars
Locke Part #: A1125MFG Part #: HS776W/RH SEAT Compare
Molded in seat, Slip-resistant floor, One-piece seamless construction, 1-1/2" diameter safety grab bars, Colors available by special order White Praxis Companies
Color: White, Size: 48" x 5.75" x 30", Sell Pack: 1, Case Qty: 1, Pallet Qty: 8, Unit Weight: 49.7200 lbs HARDWARE HOUSE 8-02062-41924-6
Color: Biscuit, Dimension A: 48", Dimension B: 32", Dimension C: 24", Dimension D: 24", Dimension E: 16", Weight (Lbs): 54, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Color: White, Dimension A: 48", Dimension B: 32", Dimension C: 24", Dimension D: 24", Dimension E: 16", Weight (Lbs): 54, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Color: Biscuit, Dimension A: 48", Dimension B: 34", Dimension C: 24", Dimension D: 24", Dimension E: 17", Weight (Lbs): 56, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
Color: White, Dimension A: 48", Dimension B: 34", Dimension C: 24", Dimension D: 24", Dimension E: 17", Weight (Lbs): 56, Edge Dimension: 3/8" w x 3/8" h One Piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., I.A.P.M.O., ANSI, HUD/FHA Standards. FLORESTONE PRODUCTS
A1274.jpg48" x 36" x 84" LH Seat, White Shower
Locke Part #: A1275MFG Part #: 48ACSL-WH Compare
Shower Module, Lustrous, durable acrylic, Integral dome, Molded seat, RH or LH, Clear acrylic grab bar, Center drain location Aquatic Co
A1274.jpg48" x 36" x 84" RH Seat, White Shower
Locke Part #: A1274MFG Part #: 48ACSR-WH Compare
Shower Module, Lustrous, durable acrylic, Integral dome, Molded seat, RH or LH, Clear acrylic grab bar, Center drain location Aquatic Co
B0279.jpg5" Plug/One Piece
Locke Part #: B0279MFG Part #: 1042E Compare
J B PRODUCTS/ALLEN DIVISION
B0279.jpg5" Plug/Two Piece
Locke Part #: B0285MFG Part #: 1042G Compare
J B PRODUCTS/ALLEN DIVISION
A2461.jpg5" Right Hand Stem
Locke Part #: A2461MFG Part #: 23-0316 Compare
KISSLER & CO
A0428.jpg5’ Shower Rod (60" x 1")
Locke Part #: A0428MFG Part #: 1274EO Compare
Chrome plated rod only, less flanges. J B PRODUCTS/ALLEN DIVISION
Color: White, Weight: 194 lbs, Drain Included : Yes, Drain Option: Left Hand, Material     : Thermal Formed Cast Acrylic, Standards: ANSI 124.1, NAHB, CSA, Type  : Universal, Capacity  : 49 gal, Cutout Dimensions: 58" x 40", Electrical Requirements    : 120V, 15A, GFCI Protected Dedicated Circuit, No of Jets: 5, Outside Dimension (LxWxD): 60" x 42" x 18-1/4", Pump     : 1.25 HP, Tub Installation Type: Drop-In Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Exclusive safety suction return fitting, Hydro-Massage System: 4 premium power-flow adjustable Jets and 1 lumbar ease-flow adjustable jets, Grip Sure textured bottom, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Color: White, Weight: 194 lbs, Drain Included : Yes, Drain Option: Right Hand, Material     : Thermal Formed Cast Acrylic, Standards: ANSI 124.1, NAHB, CSA, Type  : Universal, Capacity  : 49 gal, Cutout Dimensions: 58" x 40", Electrical Requirements    : 120V, 15A, GFCI Protected Dedicated Circuit, No of Jets: 5, Outside Dimension (LxWxD): 60" x 42" x 18-1/4", Pump     : 1.25 HP, Tub Installation Type: Drop-In Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Exclusive safety suction return fitting, Hydro-Massage System: 4 premium power-flow adjustable Jets and 1 lumbar ease-flow adjustable jets, Grip Sure textured bottom, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Size: 5-1/4" to 6-1/4", Colors & Finishes: Polished Chrome AMERICAN STANDARD
C0281.jpg5-3/8" x 3-1/2
Locke Part #: C0282MFG Part #: G-16 14090 Compare
KIRKHILL MFG CO
C0281.jpg5-3/8" x 3-1/8"
Locke Part #: C0281MFG Part #: G-8 21384 Compare
KIRKHILL MFG CO
Water Depth: 38", Material: Gelcoat, Overall Length: 52", Overall Width: 32", Overall Height: 42", Door Width: 20", Step Height: 5-1/4", Maximum Water Capacity: 60-gallons, Installation Type: Alcove, Bath Type: Combination - Air Bath / Whirlpool, Drain Location: Right, Capacity (Gallons): 60, Tub Shape: Rectangular, Pump Placement: Right, Blower Placement: Right Premium acrylic with fibreglass reinforcement, Outward opening door, Water tight door system, Quick Drain water removal system, Built-in chair height seat for easy wheelchair transfer, Textured tub floor, Free standing metal support frame, 26 air jets full surrounding the bathing well, Automatic purge with timer, Ozone sanitation, Grab bar, 12 hydro massage jets including 6 lumbar jets, Optional Components:, ADA compliant Slide Bar with Hand shower Holder, Chromatherapy Light System, In-Line Heater, Neck Rest, Acrylic Tub Extender, Tile Flange, For use with:, Walk-In Bath Universal Wall Surround, Ciencia solid surface wall set, Compliance Certifications - Meets or Exceeds the Following Specifications:, ANSI Z124.3, IAPMO - USPC, ANSI Z124.1.2 for Plastic Bathtubs, ASME A112.19.7 for Whirlpool Appliances ASME, A112.19.15 for Walk-In Bathtubs, CSA B-45.5 for Canadian Plumbing Fixtures AMERICAN STANDARD
Finish: Chrome, Flow Rate: 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa, Description Ext.: CHROME, Pricing Category: BDEL, Stock or OAN: s, DELTA FAUCET Model Number: 520-MPU-DST, DELTA FAUCET Description: Delta Classic: Single Handle Centerset Lavatory Faucet, Case Quantity: 3, Series: Core 520/522 Series, Handle: Single Handle Lever, Attribute: With Pop-Up, Valve Type: DIAMOND Seal Valve, Number of Handles: 1, Installation Type: Centerset, Drain Type: Metal pop-up, Aerator Type: Cache Sensible styling that complements any home, Classically styled faucets and accessories handle the toughest of tasks with ease, Single lever handle for ease of control, Fast, tool free installation and increase mounting depth to 2.5 , Fits standard 4 installation, A hidden cache aerator adds an aesthetic element to the enhanced design of the faucet, Holes/Width- 3-hole 4 installation, Single Handle Deck Mount, ADA Compliant, DIAMOND Seal Technology, Legislation Compliant, Water-Efficient Product meeting CALGreen standards, Standard Specifications:, Lever and knob handle. Control mechanism is the diamond embedded ceramic disc cartridge, Control handle shall return to neutral position when valve is turned off, 3/8 O.D. straight, staggered pex supply tubes - 35 (889 mm) and 36 (914 mm) long, Models with suffix MPU have metal drain with pop-up type fitting with plated flange and stopper, Models with no suffix have brass drain w/plastic tailpiece, Lever handles have red/blue button, Includes cartridge limit switch to allow a maximum hot water mix of 50%, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes: or, for commercial users, for 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1, ASME A112.18.2 / CSA B125.2, Indicates compliance to ICC/ANSI A117.1, Verified compliant with 0.25% weighted average Pb content regulations, EPA Water Sense Delta Faucet Co
Finish: Chrome, Flow Rate: 1.50 gpm @ 60 psi, 5.7 L/min @ 414 kPa, Description Ext.: CHROME, Pricing Category: BDEL, Stock or OAN: s, DELTA FAUCET Model Number: 522-MPU-DST, DELTA FAUCET Description: Delta Classic: Single Handle Centerset Lavatory Faucet, Case Quantity: 3, Series: Core 520/522 Series, Handle: Single Handle Knob, Attribute: With Pop-Up, Valve Type: DIAMOND Seal Valve, Number of Handles: 1, Installation Type: Centerset, Drain Type: Metal pop-up, Aerator Type: Cache Sensible styling that complements any home, Classically styled faucets and accessories handle the toughest of tasks with ease, Single lever handle for ease of control, Fast, tool free installation and increase mounting depth to 2.5, A hidden cache aerator adds an aesthetic element to the enhanced design of the faucet, Fits standard 4 installation, Holes/Width- 3-hole 4 installation, Single Handle Deck Mount, DIAMOND Seal Technology, Legislation Compliant, Water-Efficient Product meeting CALGreen standards, Standard Specifications:, Lever and knob handle. Control mechanism is the diamond embedded ceramic disc cartridge, Control handle shall return to neutral position when valve is turned off, Lever handles have red/blue button, 3/8 O.D. straight, staggered pex supply tubes 35 (889 mm) and 36 (914 mm) long, Models with suffix MPU have metal drain with pop-up type fitting with plated flange and stopper, Models with no suffix have brass drain w/plastic tailpiece, Warranty:, Lifetime Faucet and Finish Limited Warranty to the original consumer purchaser to be free from defects in material and workmanship, 5 Year Limited Warranty for usage in all industrial, Commercial and Business applications, Complies With:, ASME A112.18.1 / CSA B125.1, ASME A112.18.2 / CSA B125.2, Indicates compliance to ICC/ANSI A117.1, EPA Water Sense Delta Faucet Co
A0100.jpg54" x 30" x 15-11/16" LH White
Locke Part #: A0101MFG Part #: 011-2303-00 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg54" x 30" x 15-11/16" RH White
Locke Part #: A0100MFG Part #: 011-2302-00 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
Warranty: Limited One Year, Dimensions: 59-3/4" x 35-3/4" x 21-1/4", Water Capacity: 32 gal. (min.) / 45 gal. (max.), Material: Acrylic, fiberglass reinforced, Electrical Requirements: 120 volt, 15 AMP, GFCI Protected Circuit, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m²), Number of Jets: 6, On/Off Control: Air Switch, Shipping Weight: 140 lbs, Pump Motor: Single speed, 120 volt, 60 HZ, 5.8 amp, premounted, Color/Finish: Biscuit Rectangular whirlpool with integral armrests, Simple, reliable air-switch turns the unit on and off, Self-contained, pre-plumbed whirlpool bath mounted on a pre-leveled base, Optional removable apron provides easy access to the motor and plumbing, Six strategically positioned jets deliver a therapeutic massage: Four body jets and two foot jets, Two air controls adjust the volume of air through the jets - creating mild to vigorous whirlpool action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Durable single-speed pump, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Optional inline heater, trim upgrade, lift and turn drain kit, factory installed nail flange, field installed nail flange kit, Made in USA MANSFIELD PLUMBING PRODUCTS
Warranty: Limited One Year, Dimensions: 59-3/4" x 35-3/4" x 21-1/4", Water Capacity: 32 gal. (min.) / 45 gal. (max.), Material: Acrylic, fiberglass reinforced, Electrical Requirements: 120 volt, 15 AMP, GFCI Protected Circuit, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m²), Number of Jets: 6, On/Off Control: Air Switch, Shipping Weight: 140 lbs, Pump Motor: Single speed, 120 volt, 60 HZ, 5.8 amp, premounted, Color/Finish: White Rectangular whirlpool with integral armrests, Simple, reliable air-switch turns the unit on and off, Self-contained, pre-plumbed whirlpool bath mounted on a pre-leveled base, Optional removable apron provides easy access to the motor and plumbing, Six strategically positioned jets deliver a therapeutic massage: Four body jets and two foot jets, Two air controls adjust the volume of air through the jets - creating mild to vigorous whirlpool action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Optional cable operated drain in color-match, chrome, everbrass (PVD), brushed nickel or oil rubbed bronze, Durable single-speed pump, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings, Optional inline heater, trim upgrade, lift and turn drain kit, factory installed nail flange, field installed nail flange kit, Made in USA MANSFIELD PLUMBING PRODUCTS
Slip-resistant floor, soap dishes and towel rack. Ideal for use by the handicapped and the elderly. Less trim. Above floor rough-in. Praxis Companies
Size: 6" Can be cut to desired length, Swivel rings Jones Stephen Cor
Finish: Stainless, Description Ext.: SHOWER ARM STAINLESS, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: RP61058SS, DELTA FAUCET Description: Delta: Shower Arm - Ceiling Mount, Case Quantity: 1, Series: Other, Length: 6", Flange Diameter: 2-1/2" Sensible styling that complements any home, Classically styled faucets and accessories handle the toughest of tasks with ease, 1/2 IPS threads, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
Finish: Chrome, Description Ext.: SHOWER ARM CHROME, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: RP61058, DELTA FAUCET Description: Delta: Shower Arm - Ceiling Mount, Case Quantity: 1, Series: Other, Length: 6", Flange Diameter: 2-1/2" Sensible styling that complements any home, Classically styled faucets and accessories handle the toughest of tasks with ease, 1/2 IPS threads, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
Finish: Venetian Bronze, Description Ext.: SHOWER ARM VEN BRONZE, Pricing Category: ADA3, Stock or OAN: s, DELTA FAUCET Model Number: RP61058RB, DELTA FAUCET Description: Delta: Shower Arm - Ceiling Mount, Case Quantity: 1, Series: Other, Length: 6", Flange Diameter: 2-1/2" Sensible styling that complements any home, Classically styled faucets and accessories handle the toughest of tasks with ease, 1/2 IPS threads, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
Finish: Stainless, Description Ext.: STAINLESS ST. / DELTA, Pricing Category: ADPT, Stock or OAN: s, DELTA FAUCET Model Number: U4993-SS, DELTA FAUCET Description: Delta: 6 Shower Arm And Flange", Case Quantity: 4, Series: Universal Showering Components, Length: 6" 1/2 IPS male threads, 2-3/8 outside diameter, Includes flange, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
Finish: Chrome, Description Ext.: CHROME / DELTA, Pricing Category: ADPT, Stock or OAN: s, DELTA FAUCET Model Number: U4993-PK, DELTA FAUCET Description: Delta: 6 Shower Arm And Flange", Case Quantity: 6, Series: Universal Showering Components, Length: 6" 1/2 IPS male threads, 2-3/8 outside diameter, Includes flange, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
Finish: Venetian Bronze, Description Ext.: RUBBER BRONZE / DELTA, Pricing Category: ADPT, Stock or OAN: s, DELTA FAUCET Model Number: U4993-RB, DELTA FAUCET Description: Delta: 6 Shower Arm And Flange", Case Quantity: 4, Series: Universal Showering Components, Length: 6" 1/2 IPS male threads, 2-3/8 outside diameter, Includes flange, Warranty:, Lifetime faucet and finish warranty Delta Faucet Co
B0347.jpg6" x 1-1/4" Extension
Locke Part #: B0347MFG Part #: 442-6 Compare
Chrome plated J B PRODUCTS/ALLEN DIVISION
B0508.jpg6"-12" lavatory faucet Oil Rubbed Bronze
Locke Part #: B0508MFG Part #: FMOA410RW Compare
LUXURY LINE FAUCETS & PARTS
A0428.jpg6’ Shower Rod (72" x 1")
Locke Part #: A0429MFG Part #: 974-662303L04 Compare
Chrome plated rod only, less flanges. Sioux Chief Mfg
Color: Biscuit, Weight: 183 lb, Material     : Thermal Formed Cast Acrylic, Standards: ANSI 124.1, NAHB, CSA, Type  : Universal, Capacity  : 39 gal, Cutout Dimensions: 58" x 30", Electrical Requirements    : 120V, 15A, GFCI Protected Dedicated Circuit, No of Jets: 6, Outside Dimension (LxWxD): 60" x 32" x 20", Pump     : 1.25 HP, Tub Installation Type: Drop-In Tub bottoms are reinforced for no-flex strength, Mounted on pre-levelled feet for easy no-mudset installation, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Hydro-Massage System: 4 premium power-flow adjustable Jets and 2 lumbar ease-flow adjustable jets, Grip Sure textured bottom, Exclusive safety suction return fitting, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Size: 6-1/4" to 7-1/4", Colors & Finishes: Polished Chrome AMERICAN STANDARD
B0503.jpg6-12" Lavatory Faucet Chrome
Locke Part #: B0503MFG Part #: FW028200CP Compare
LUXURY LINE FAUCETS & PARTS
B0265.jpg6-12" Lavatory Faucet Satin Nickel
Locke Part #: B0265MFG Part #: FW025200NP Compare
Washer-less cartridge design all brass & copper waterways. NSF approved. LUXURY LINE FAUCETS & PARTS
B0503.jpg6-12" Lavatory Faucet Satin Nickel
Locke Part #: B0504MFG Part #: FW028200NP Compare
LUXURY LINE FAUCETS & PARTS
C0283.jpg6-3/4" x 3-1/2"
Locke Part #: C0283MFG Part #: G-16W 14092 Compare
KIRKHILL MFG CO
Finish: Stainless, Description Ext.: TRIM STAINLESS, Pricing Category: ADEL, Stock or OAN: s, DELTA FAUCET Model Number: T11900-SS, DELTA FAUCET Description: Delta: 6 Setting Diverter Trim, Case Quantity: 3, Series: Other, Handle: Single Handle Lever For use with R11000 diverter rough-in, Includes valve cartridge, Available in five finishes, ADA Compliant, Standard Specifications:, Six function diverter 3 individual positions, 3 shared positions, 1/2" rough-in, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes; or, for commercial users, or 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1, Indicates compliance to ICC/ANSI A117.1 Delta Faucet Co
T11900.jpg6-Setting Diverter Valve Trim, Chrome, 3/Case
Locke Part #: A2118MFG Part #: T11900 Compare
Finish: Chrome, Description Ext.: TRIM CHROME, Pricing Category: ADEL, Stock or OAN: s, DELTA FAUCET Model Number: T11900, DELTA FAUCET Description: Delta: 6 Setting Diverter Trim, Case Quantity: 3, Series: Other, Handle: Single Handle Lever For use with R11000 diverter rough-in, Includes valve cartridge, Available in five finishes, ADA Compliant, Standard Specifications:, Six function diverter 3 individual positions, 3 shared positions, 1/2" rough-in, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes; or, for commercial users, or 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1, Indicates compliance to ICC/ANSI A117.1 Delta Faucet Co
Finish: Venetian Bronze, Description Ext.: TRIM VEN BRONZE, Pricing Category: ADEL, Stock or OAN: s, DELTA FAUCET Model Number: T11900-RB, DELTA FAUCET Description: Delta: 6 Setting Diverter Trim, Case Quantity: 3, Series: Other, Handle: Single Handle Lever For use with R11000 diverter rough-in, Includes valve cartridge, Available in five finishes, ADA Compliant, Standard Specifications:, Six function diverter 3 individual positions, 3 shared positions, 1/2" rough-in, Warranty:, Lifetime limited warranty on parts (other than electronic parts and batteries) and finishes; or, for commercial users, or 5 years from date of purchase, 5 year limited warranty on electronic parts (other than batteries); or, for commercial users, for 1 year from the date of purchase, No warranty is provided on batteries, Complies With:, ASME A112.18.1 / CSA B125.1, Indicates compliance to ICC/ANSI A117.1 Delta Faucet Co
Color: White, Dimensions (Width x Depth x Height): 60" x 36" x 76", Drain: Center, Drain Diameter/Clearance: 3-1/4, 7/8, Drain Rough-In (from Back Wall): 15-3/4, Drain Rough-In (from Side Wall): 30, Enclosure Opening: 54, Material: Gelcoat, Seat: 1 LH, Skirt Height: 6, Wall Finish: Smooth Aquatic Co
Color: White, Dimensions (Width x Depth x Height): 60" x 36" x 76", Drain: Center, Drain Diameter/Clearance: 3-1/4, 7/8, Drain Rough-In (from Back Wall): 15-3/4, Drain Rough-In (from Side Wall): 30, Enclosure Opening: 54, Material: Gelcoat, Seat: 1 RH, Skirt Height: 6, Wall Finish: Smooth Aquatic Co
Color: Biscuit, Dimensions (Width x Depth x Height): 60" x 35" x 72", Drain: Center, Drain Diameter/Clearance: 3-1/4, 3/4, Drain Rough-In (from Back Wall): 15-3/4, Drain Rough-In (from Side Wall): 30, Enclosure Opening: 55-3/4, Material: Gelcoat, Seat: 2, Skirt Height: 6, Wall Finish: Smooth Aquatic Co
A1100.jpg60" LH T & S with Grab Bars White
Locke Part #: A1101MFG Part #: HTS731 W/BARS L Compare
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A1100.jpg60" LH T & S with RH phenolic seat, White
Locke Part #: A1106MFG Part #: HTS731W/RH SEAT Compare
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A0960.jpg60" Natural Garden Tub
Locke Part #: A0961MFG Part #: 1160410-BO Compare
This Garden Tub model features an exterior step with wainscot. Large deck area for mounting faucets. Sump Depth: 13" Aquatic Co
A1100.jpg60" RH T & S with Grab Bars White
Locke Part #: A1100MFG Part #: HTS736 W/BARS R Compare
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A1100.jpg60" RH T & S with LH phenolic seat White
Locke Part #: A1105MFG Part #: HTS736W/LH SEAT Compare
One piece seamless construction, Standard with four 1-1/2" diameter stainless steel grab bars, Slip-resistant floor, Choice of right or left hand outlet, Complies with ANSI 117.1.86, Note:, Seat Must Be Mounted On Unit Before Unit Is Set In Place. It Can Not Be Added Later. Praxis Companies
A1120.jpg60" Shower with fold-down seat on right White
Locke Part #: A1121MFG Part #: HS760W/RH SEAT Compare
5' Shower with or without seat., Can be recessed for wheelchair roll-in, Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for handicapped people., 1-1/2" diameter stainless steel grab bar., Slip-resistant floor., Drain is located in rear center of unit., Note: seat must be mounted before unit is set in place. It can not be added later. Praxis Companies
A1120.jpg60" Shower with wraparound grab-bar White
Locke Part #: A1120MFG Part #: HS760 60" W/ WRAP BAR Compare
5' Shower with or without seat., Can be recessed for wheelchair roll-in, Gel-coated Fiberglass, One piece seamless construction., Complies with ANSI 117.1.86 providing accessibility for handicapped people., 1-1/2" diameter stainless steel grab bar., Slip-resistant floor., Drain is located in rear center of unit., Note: seat must be mounted before unit is set in place. It can not be added later. Praxis Companies
COMPETITIVE ACRYLIC WHIRLPOOL.jpg60" White Acrylic Skirt for A0196 (Optional )
Locke Part #: A0197MFG Part #: SKIRT NO/ACCESS Compare
6 Jets 3/4 H.P. Standard Pump. Acrylic. On/Off Switch, Air control, Skirt sold separately. Sump Depth: 19" AMERICAN ACRYLIC & INJECTION
A0220.jpg60" White Drop-In Tub
Locke Part #: A0220MFG Part #: 3760620-WH Compare
Contoured comfort... featuring a sculptured look in a deep model with a contoured back and integral armrests., Sump Depth: 19 -1/2 Aquatic Co
A0966.jpg60" White Drop-In Tub
Locke Part #: A0966MFG Part #: 6524 WHITE Compare
Sump Depth: 17". This contemporary and slick design fits well into a 5' space. Designed for pleasure. Drop-In MANSFIELD PLUMBING PRODUCTS
A0960.jpg60" White Garden Tub
Locke Part #: A0960MFG Part #: TO-201-01 Compare
This Garden Tub model features an exterior step with wainscot. Large deck area for mounting faucets. Sump Depth: 13" Praxis Companies
A1263.jpg60" x 3 4" x 84" LH Drain, Bone Tub/Shower Unit
Locke Part #: A1268MFG Part #: 60ACTSL-BO Compare
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
A1263.jpg60" x 3 4" x 84" LH Drain, White Tub/Shower Unit
Locke Part #: A1264MFG Part #: 60ACTSL-WH Compare
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
A0100.jpg60" x 30" x 14-1/4" LH Biscuit
Locke Part #: A0115MFG Part #: 011-2365-96 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg60" x 30" x 14-1/4" LH Natural
Locke Part #: A0319MFG Part #: 011-2365D06 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg60" x 30" x 14-1/4" LH White
Locke Part #: A0103MFG Part #: 011-2365D00 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg60" x 30" x 14-1/4" RH Biscuit
Locke Part #: A0114MFG Part #: 011-2364-96 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg60" x 30" x 14-1/4" RH Natural
Locke Part #: A0318MFG Part #: 011-2364D06 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
A0100.jpg60" x 30" x 14-1/4" RH White
Locke Part #: A0102MFG Part #: 011-2364D00 Compare
Porcelain enameled steel one-piece bath. Slip-resistant bottom. BOOTZ MFG
Color: Biscuit, Dimension A: 60", Dimension B: 32", Dimension C: 30", Dimension D: 30", Dimension E: 16", Weight (Lbs): 76 One piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., Model shall conform to ANSI-Z124.1.2-2005 FLORESTONE PRODUCTS
Color: White, Dimension A: 60", Dimension B: 32", Dimension C: 30", Dimension D: 30", Dimension E: 16", Weight (Lbs): 76 One piece, single threshold model for recessed installation, 1" flange on three remaining sides., Integral drain with Wedge-Lok Seal., Model shall conform to ANSI-Z124.1.2-2005 FLORESTONE PRODUCTS
COMPETITIVE ACRYLIC WHIRLPOOL.jpg60" x 32" x 19" White Acrylic Whirlpool; Skirt not included
Locke Part #: A0196MFG Part #: 60X32 LEADR TUB Compare
6 Jets 3/4 H.P. Standard Pump. Acrylic. On/Off Switch, Air control, Skirt sold separately. Sump Depth: 19" AMERICAN ACRYLIC & INJECTION
A1263.jpg60" x 34" x 84" RH Drain, Bone Tub/Shower Unit
Locke Part #: A1267MFG Part #: 60ACTSR-BO Compare
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
A1263.jpg60" x 34" x 84" RH Drain, White Tub/Shower Unit
Locke Part #: A1263MFG Part #: 60ACTSR-WH Compare
Tub/Shower Module, Lustrous, durable acrylic, Integral toiletry shelves, Integral dome, Clear acrylic grab bar, LH or RH drain option Aquatic Co
A1288.jpg60" x 60" x 22" White corner whirlpool tub
Locke Part #: A1288MFG Part #: 2600CCWP-WH Compare
Standard Features:, 3/4 HP motor, 4 Adjust-a-flow jets, Beautiful white LASCOAT gelcoat finish, Integral 2-T Tiling Flange: Turned up edge on 2 sides, Center front drain location only., Advanced safety suction system, Corrugated Cap & Shrink Wrap, 1 Pneumatic on/off control, Electrical appliance plug, 1 Air control, Deep Bathing Well, Integral seat & armrests Aquatic Co
A1287.jpg60" x 60" x 23" White corner whirlpool tub
Locke Part #: A1287MFG Part #: 3860621-WH W/2T FLANGE Compare
Standard Features:, 3/4 HP motor, 6 Adjust-a-flow jets, 2" rolled down edge on 3 front sides, Integral 2-T Tiling Flange: Turned up edge on 2 sides, Center front drain location only., Advanced safety suction system, Comfort-sloped backrest, Pneumatic on/off control, 2 Lumbar Jets, 2 Air controls, Pre-leveled base, Electrical appliance plug, Integral seat & armrests Aquatic Co
Warranty: Limited One Year, Color: Biscuit, Water Capacity: 60 gal. (min.) / 85 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 59-3/4" x 59-3/4" x 21-1/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 58, On/Off Control: Air Switch, Shipping Weight: 167 lbs. Spacious, two-person corner model with integral armrests, Drop-in oval with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 58 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Material- Acrylic, fiberglass reinforced, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
Warranty: Limited One Year, Water Capacity: 60 gal. (min.) / 85 gal. (max.), Material: Acrylic, fiberglass reinforced, Blower Motor: 120V, 60HZ, 6.0 Amp, Single Speed, 200 Watt Heater, Single Phase–Pre-mounted, Dimension: 59-3/4" x 59-3/4" x 21-1/4", Electrical Requirements: 120V, 15 Amp, GFCI protected, Floor Loading Weight: 47 lbs. / sq. ft. (229 kg/m2), Number of Jets: 58, On/Off Control: Air Switch, Shipping Weight: 167 lbs. Spacious, two-person corner model with integral armrests, Drop-in oval with integral armrests, Variable speed blower produces powerful air streams for a better massage, A powerful heating element warms the air before it enters the bathing well, 58 strategically positioned perimeter air jets in the channel surround the bather with millions of soothing bubbles, 20 minutes after the bath is turned off the blower automatically engages to purge any remaining water out of the Quick Drain air channel, Simple on/off air switch adjusts the blower speed creating mild to vigorous action, Color-match trim, chrome and everbrass (PVD), brushed nickel and oil rubbed bronze upgrades available, Available in white, biscuit, bone and almond, Outstanding protection Mansfield Limited One Year Acrylic Warranty, Material- Acrylic, fiberglass reinforced, Construction- Self-contained, pre-plumbed air massage bath, mounted on a pre-leveled base, Meets or exceeds ANSI Z124.1.2 Plastic Bathtubs and Shower Units. ASME A112.19.7M Whirlpools, ASME A112.19.8M Suction Fittings MANSFIELD PLUMBING PRODUCTS
A0136.jpg62040100-0 White seated shower [use door A0218]
Locke Part #: A0136MFG Part #: 62040100-0 Compare
Constructed of exclusive Vikrell solid material, Advantage showers are available in a durable high-gloss finish which provides a smooth surface. STERLING PLUMBING GROUP, INC
Color: White, Weight: 210 lb, Material     : Thermal Formed Cast Acrylic, Standards: ANSI 124.1, NAHB, CSA, Type  : Universal, Capacity  : 71 gal, Cutout Dimensions: 70-1/2" x 40-1/2", Electrical Requirements    : 120V, 15A, GFCI Protected Dedicated Circuit, No of Jets: 7, Outside Dimension (LxWxD): 72" x 42" x 20-1/2", Pump     : 1.25 HP, Tub Installation Type: Drop-In Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Hydro-massage system: 4 premium power-flow adjustable jets, 1 lumbar ease-flow adjustable jets and 2 foot ease-flow adjustable jet, Grip Sure textured bottom, Exclusive safety suction return fitting, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Color: Biscuit, Weight: 210 lb, Material     : Thermal Formed Cast Acrylic, Standards: ANSI 124.1, NAHB, CSA, Type  : Universal, Capacity  : 71 gal, Cutout Dimensions: 70-1/2" x 40-1/2", Electrical Requirements    : 120V, 15A, GFCI Protected Dedicated Circuit, No of Jets: 7, Outside Dimension (LxWxD): 72" x 42" x 20-1/2", Pump     : 1.25 HP, Tub Installation Type: Drop-In Tub bottoms are reinforced for no-flex strength, Premium power-flow adjustable jets -adjustable flow rate and directional jets, Mounted on pre-levelled feet for easy no-mudset installation, Hydro-massage system: 4 premium power-flow adjustable jets, 1 lumbar ease-flow adjustable jets and 2 foot ease-flow adjustable jet, Grip Sure textured bottom, Exclusive safety suction return fitting, Ease-flow adjustable jets - feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Durable, easy to clean thermal formed cast acrylic, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire AMERICAN STANDARD
Size: 7-1/4" to 8-1/4", Colors & Finishes: Polished Chrome AMERICAN STANDARD
A0968.jpg72" White Drop-In Tub
Locke Part #: A0968MFG Part #: 6533 WHITE SOAKER Compare
Sump Depth: 23". Detailed sculptured beauty, built-in assistance bars, and soap dishes. Slip resistant bottoms. End drain, drop-in tub with. This oval tub can also be whirlpool adapted. Easy cleaning and durability. MANSFIELD PLUMBING PRODUCTS
A0971.jpg72" White Drop-In Tub
Locke Part #: A0971MFG Part #: 1572420-WH Compare
Sump Depth: 19-1/2 . Contoured comfort featuring a sculptured look in a deep model with a contoured back. Outstanding features are its armrests. Drop-In Aquatic Co
A1286.jpg72" x 36" x 21-3/4" White acrylic whirlpool tub
Locke Part #: A1286MFG Part #: 4272621-WH Compare
3/4 HP motor, 6 Adjust-a-flow jets, Standard island unit - 2" rolled down edge on 4 sides, Universal drain location (right or left hand):, Pneumatic on/off control, Comfort-sloped backrest, Electrical appliance plug, Pre-leveled base, 2 Air controls, Advanced safety suction system, Acrylic grab bars Aquatic Co
A1289.jpg72" x 42" x 23-7/8" White whirlpool tub
Locke Part #: A1289MFG Part #: 5772621-WH Compare
6 jets, 3/4 HP motor, Beautiful white LASCOAT gelcoat finish Aquatic Co
B2910.jpg7385.000.002 RELIANT 3 LAVA SPEED DRAIN CONNE
Locke Part #: B2910MFG Part #: 7385.000.002 Compare
Cast Brass Waterway, Braided Flexible Supply Hoses with 3/8" Compression Connectors, Metal Lever Handle, Metal Speed Connect Pop-Up Drain, 47mm Ceramic Disc Valve Cartridge with an Adjustable Hot Limit Safety Stop, All Metal Construction, Water Conserving 1.5GPM Pressure-Compensating Aerator, Meets the ADA Guidelines AMERICAN STANDARD
B0279.jpg8" Plug/Two Piece
Locke Part #: B0286MFG Part #: 1042A Compare
J B PRODUCTS/ALLEN DIVISION
B0347.jpg8" x 1-1/4" Extension
Locke Part #: B0348MFG Part #: 442-8 Compare
Chrome plated J B PRODUCTS/ALLEN DIVISION
Color: White, Weight: 210 lbs, Material     : Thermal Formed Cast Acrylic, Standards: ANSI 124.1, NAHB, CSA, Type  : Universal, Capacity  : 71 gal, Cutout Dimensions: 1" to ID Around Rim, Electrical Requirements    : 120V, 15A, GFCI Protected Dedicated Circuit, No of Jets: 8, Outside Dimension (LxWxD): 59-3/4" x 59-3/4" x 20-3/4", Pump     : 1.25 HP, Tub Installation Type: Corner Durable, easy to clean thermal formed cast acrylic, Tub bottoms are reinforced for no-flex strength, Mounted on pre-leveled feet for easy no-mudset installation, Grip Sure textured bottom, Exclusive safety suction return fitting, Premium Power-Flow Adjustable Jets -Adjustable flow rate and directional jets, Ease-Flow Adjustable Jets - Feature a reduced flow rate that delivers pinpoint directional flow to lumbar and lower extremity zones, Hydro-Massage System: 4 Premium Power-Flow Adjustable Jets, 3 Lumbar Ease-Flow Adjustable Jets & 1 Foot Ease-Flow Adjustable Jet, CA in-line heater has been specifically designed to enhance the enjoyment of your whirlpool bath. The in-line heater constantly maintains the warm relaxing temperature of the whirlpool bath for as long as you desire MANSFIELD PLUMBING PRODUCTS
Color: White, Water Capacity: 40-50 gallons, Material: Marine grade fiberglass, Dimension: 51-1/2″ x 30″ x 40″, Floor Loading Weight: 450 lbs, Includes: Wall brackets kits, end panel, front panel & cable drain. Nailing flange kit optional Most economical, Tall standard tub equipped with water tight door that allows you to enter effortlessly, Taller than standard tub with sculpted 17 high seat (ADA), allows the bather to remain in an upright position while being completely submerged in water, Water-tight, inward swinging door with Lifetime Guarantee on the seal gives users with limited mobility a safe and easy entry and exit, Easy door locking system, Rich, high gloss finish and slip resistant floor, Adjustable one-inch steel frame with adjustable feet, Replaces standard size tub with right or left hand drain and fits through a standard 32 bathroom doorway, Available in Soaker, Whirlpool, Air Bath and Combination Bath in both left and right-hand drain options, Cable waste and overflow standard on all configurations, Outstanding Protection 10 Year Warranty on shell, 5-Year labor warranty on all factory installed components, lifetime warranty on the door seal, Marine grade fiberglass., Outer finish is a double hand applied gel coat. Frame is one inch powder-coated steel. all hardware and door mechanisms are stainless steel., Water capacity 40-50 gallons with bather, Floor loading 450 lbs