Loading ...

Loading ...

Search in: Plumbing Tools Category

RIDGID
RIDGID
T0642.jpg (A-6583) 5/8" Female Coupling
Locke Part #: T0642 MFG Part #: 92810
RIDGID
T641.jpg (A-7571) 3/4" Repair Splicer
Locke Part #: T0517 MFG Part #: 31492
RIDGID
RIDGID
RIDGID
1-1/4" cable. 15 Ft. standard all purpose cable with 3/9" pitch. RIDGID
RIDGID
RIDGID
1-1/4" cable. 15 Ft. standard all purpose, cable with 1/2" pitch. RIDGID
RIDGID
RIDGID
RIDGID
Used in drain lines 1-1/4" - 2". Drop head leads into down drain pipes, especially good for back-to-back mounted fixtures & severe bends. Resists kinking. RIDGID
RIDGID
RIDGID
T0380.jpg (C-32) 3/8" x 75’ Inner Core Cable
Locke Part #: T0380 MFG Part #: 37847
RIDGID
RIDGID
Used in drain lines 1-1/4" - 2-1/2" such as kitchen sinks, lavatory sinks, slop sinks, & disposal waste lines. Flexible, yet tough, 3/8, " cable most commonly used after traps have been removed. RIDGID
T0380.jpg (C-45) 1/2" x 75’ Inner Core Cable
Locke Part #: T0375 MFG Part #: 37862
RIDGID
RIDGID
RIDGID
Used in drain lines 1-1/4" - 2-1/2" such as kitchen sinks, lavatory sinks, slop sinks, & disposal waste lines. Flexible, yet tough, 3/8, " cable most commonly used after traps have been removed. RIDGID
Used for 2" & 3" floor drains. Tight wind cable providing good rigidity in a hollow core cable. Not for tree roots. RIDGID
Cleans 1-1/2" through 2" lines after P-traps have been removed. RIDGID
New Features:, New Torque Limiter - Causes the drum to stop spinning when the blade becomes lodged in a blockage. Warns the operator when blockages are encountered., Contemporary Style Drum Design - Rugged, corrosion resistant, polyethylene drum is rust/dent proof & features larger access holes to drum interior. Positioned 90 to the floor for better cable control., New "Solid Core" Cable - Uses tough 3/8" or 1/2" Integral Wound (IW) solid core cable that is rugged & kink resistant. Each size comes in 50 or 75 lengths & utilizes a variety of the Ridgid quick connect cutter., Drum capacity is 100 of 3/8" or 75 of 1/2". 3/8" cable best for 1-1/2" to 3" lines up to 100 . 1/2" cable best for 2" to 4" lines up to 75 ., 3 HP motor spins cable at 190RPM, CSA approved., Approved to UL Standards (NRTLC). RIDGID
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. RIDGID
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. RIDGID
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. RIDGID
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. RIDGID
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
Most effective tool for sawing through heavy root stoppages. Used with all machines spinning 1-1/4 cable. Unique design permits backing out of badly damaged pipe without danger of locking. RIDGID
RIDGID
For picking up or boring through, rag stoppages. Always first tool feed into the line to explore stoppage, return with sample to surface, and determine proper tool to use for its removal. RIDGID
Used for easy cleaning of lines with a number of elbows. 1-1/8" diameter. RIDGID
RIDGID
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
For cleaning back-to-back fixtures. Drop head leads into down drain pipe. RIDGID
RIDGID
RIDGID
Standard funnel auger is the second tool fed into the line blocked with roots. For KM-1500. RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
RIDGID
Designed to retrieve all cables with 3/4" pitch. RIDGID
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. RIDGID
Recommended as first follow-up tool to cut through any stoppage after augers have been used. 2-1/2" wide. RIDGID
T275.jpg 0 to 100 lbs. psi
Locke Part #: T0278 MFG Part #: T278
Adapts to 3/4" MPT, 2" gauge. BETTER ENTERPRISE CO LTD
T275.jpg 0 to 30 lbs. psi
Locke Part #: T0275 MFG Part #: T275
Adapts to 3/4" MPT, 2" gauge. BETTER ENTERPRISE CO LTD
Used for testing gas leaks, can be used instead of a manometer. Complies with Section 319.0 of Uniform Plumbing Code. All parts are precision made & assembled with sealant. 3/4" FTP,2" Gauge. Assembled in USA. PASCO SPECIALTY & MFG INC
Product Image Not Available 00-R 1" Head With Die
Locke Part #: T0324 MFG Part #: 36900
RIDGID
Product Image Not Available 00-R 1/2" Head With Die
Locke Part #: T0322 MFG Part #: 36890
RIDGID
Product Image Not Available 00-R 3/4" Head With Die
Locke Part #: T0323 MFG Part #: 36895
RIDGID
T316.jpg 00-R Ratchet Threader
Locke Part #: T0316 MFG Part #: 38540
Drop head dies. Head locks in or releases by pull of ratchet knob. Separate sets of alloy steel chaser dies, quickly removed or reversed for close-to-wall threads. Ratchet and handle complete. RIDGID
T1032.jpg 1" Class 200, Sch.40 & 80
Locke Part #: T1034 MFG Part #: J44100
Jones Stephen Cor
T344.jpg 1" Die Only
Locke Part #: T0346 MFG Part #: 05610
REED MFG. COMPANY
T0943.jpg 1" Hand Crimper
Locke Part #: T0943 MFG Part #: ROS9204STM
SEARGANT
T0947.jpg 1" Hand Crimper
Locke Part #: T2489 MFG Part #: 18049
FLAIR-IT SALES
T1223.jpg 1" Jaw for Pex
Locke Part #: T1285 MFG Part #: 22973
RIDGID
T1223.jpg 1" Propress Jaw
Locke Part #: T1225 MFG Part #: 76662
RIDGID
T0791.jpg 1" Stub Socket Adapter
Locke Part #: T0788 MFG Part #: 555SP2010000
Allows You To Meet Requirements Of D.O.T. 192.283, Economical:, Far less expensive than Electric tools. Affordable!, Quick Line Repairs:, Allows fast, convenient, quality fusion., Portable:, Weighs only 3-1/2 lbs. reinforced coating., Durable No Stick Coating:, Stainless Steel., Interchangeable stub & socket:, One tool capable of fusing sizes 3/4", 1", 1-1/4" & 2"., Easy To Read Thermometer:, Large dial recessed in handle., Also: 1/2, "-4" combination STUB OR SOCKET tool also available. GEORG FISCHER CENTRAL PLASTICS
T2458.jpg 1" Twist ‘N Seal Tool
Locke Part #: T2457 MFG Part #: 83784
Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! IPS Corporation
T2514.jpg 1/2" & 3/4" Crimp Tool
Locke Part #: T2514 MFG Part #: ROS9306STCDP
Composite handles make this tool lighter and easier to use!, Combo feature saves money and space!, Works with 1/2 and 3/4 copper crimp rings. SEARGANT
T344.jpg 1/2" Die Only
Locke Part #: T0344 MFG Part #: 05606
REED MFG. COMPANY
Size: Single 1/2, Weight: 0.40 lbs, Quantity: 6, Interleaved: 10021449972502, Dimensions (in): 1 x 1 x 4, Cubic Feet: 0.16 The world s only self-locking, reversible, internal wrench, Can remove the most stubborn nipples, Works on Corroded Pipe, No thread damage, Self-Locking and Reversible, For use with Schedule 40 Pipe, Made of Heat Tempered Steel, Fits Standard 3/8 and 1/2 Ratchets, Patent # 6,675,679B2. WILDE TOOL CO INC 085432020772
T0947.jpg 1/2" Hand Crimper
Locke Part #: T0947 MFG Part #: 18028
FLAIR-IT SALES
T0943.jpg 1/2" Hand Crimper
Locke Part #: T0949 MFG Part #: ROS9202STS
SEARGANT
T4961.jpg 1/2" Installation Tool
Locke Part #: T4961 MFG Part #: 18150
The flair-it pro installation tool is used to install flair-it pro rings within seconds. This tool is compact and easy to use in tight spaces. There is no other system as fast and easy as the flair-it pro system. FLAIR-IT SALES
RIDGID
h54050.jpg 1/2" MIP PlumBest Handi-Plug
Locke Part #: M1219 MFG Part #: H54050
Combination test plug and stub-out for drop eared ell, No thread seal required, Reusable - long lasting, No tools required - manual installation allows for no time wasted applying and removing thread tape after each use! Cost-effective, too!, Smooth at thread end for easy plastering, Time and labor savings Jones Stephen Cor
T429.jpg 1/2" Pipe Extractor
Locke Part #: T0429 MFG Part #: 35610
RIDGID
T1032.jpg 1/2" Sch. 40 & 80
Locke Part #: T1032 MFG Part #: J44050
Jones Stephen Cor
Weight: 23-1/10 Lb., Capacity: 1/2" to 2" Commercially-Available Schedule 5-40 Black Iron Pipe RIDGID
Weight: 48-1/2 Lb., Capacity: 1/2" to 2" Commercially-Available Schedule 5-40 Black Iron Pipe RIDGID
T490.jpg 1/2" x 50’ Sewer Tape
Locke Part #: T0490 MFG Part #: 62535
Quality, oil tempered, flat spring steel wire tape for cleaning all sizes of sewers & drains. Automatic grip handle helps force tapes back & forth easily. Tapes furnished with spear point on one end & roller ball point on the other. RIDGID
PASCO SPECIALTY & MFG INC
T265.jpg 1/4" x 25’ EZ Kleen Auger
Locke Part #: T0265 MFG Part #: 630030
High tensile spring wire. Pistol grip handle, steel drum for fast clearing of clogged drains and waste lines. Spin action permits passage of wire through traps and around bends with ease. GENERAL WIRE SPRING
Models 22 & 25 Bench Yoke Vises. Yoke & base are made of dependable, strong iron. Hardened alloy steel jaws & convenient pipe rest & bender. REED MFG. COMPANY
Models 22 & 25 Bench Yoke Vises. Yoke & base are made of dependable, strong iron. Hardened alloy steel jaws & convenient pipe rest & bender. REED MFG. COMPANY
T1032.jpg 1-1/2" Class 200, Sch.40 & 80
Locke Part #: T1036 MFG Part #: J44150
Jones Stephen Cor
98040.jpg 1-1/2" Golden Pipe Shredder
Locke Part #: T2447 MFG Part #: 98040
Size: 1- 1/2", Quantity: 4, Interleaved: 10021449980408, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges Rectorseal 021449980401
Product Image Not Available 1-1/2" H-Series Expander Head
Locke Part #: R1508 MFG Part #: Q6381500
Uponor
T1480.jpg 1-1/2" Quick Sweat Tool.
Locke Part #: T1485 MFG Part #: 51150
PASCO SPECIALTY & MFG INC
T40.jpg 1-1/2" Wing Nut Test Plug
Locke Part #: T0040 MFG Part #: T40
BETTER ENTERPRISE CO LTD
T1032.jpg 1-1/4" Class 200, Sch.40 & 80
Locke Part #: T1035 MFG Part #: 3242
PASCO SPECIALTY & MFG INC
T344.jpg 1-1/4" Die Only
Locke Part #: T0347 MFG Part #: 05612
REED MFG. COMPANY
Product Image Not Available 1-1/4" H-Series Expander Head
Locke Part #: R1507 MFG Part #: Q6381250
Uponor
T1223.jpg 1-1/4" Propress Jaw
Locke Part #: T1226 MFG Part #: 76667
RIDGID
T1480.jpg 1-1/4" Quick Sweat Tool.
Locke Part #: T1484 MFG Part #: 51125
PASCO SPECIALTY & MFG INC
T0791.jpg 1-1/4" Stub Socket Adapter
Locke Part #: T0789 MFG Part #: 555SP2120000
Allows You To Meet Requirements Of D.O.T. 192.283, Economical:, Far less expensive than Electric tools. Affordable!, Quick Line Repairs:, Allows fast, convenient, quality fusion., Portable:, Weighs only 3-1/2 lbs. reinforced coating., Durable No Stick Coating:, Stainless Steel., Interchangeable stub & socket:, One tool capable of fusing sizes 3/4", 1", 1-1/4" & 2"., Easy To Read Thermometer:, Large dial recessed in handle., Also: 1/2, "-4" combination STUB OR SOCKET tool also available. GEORG FISCHER CENTRAL PLASTICS
T115.jpg 1.50" Single-Size Test Ball
Locke Part #: T0115 MFG Part #: 270016
Oatey SCS
T1020.jpg 10" Garbage Disposal Unlock Wrench
Locke Part #: T1020 MFG Part #: T1020
BETTER ENTERPRISE CO LTD
Model K-60SP Machine with: Operator s Mit, Pin Key & Rear Guide Hose, Plus: Tool Kit & Cable Kit., A compact machine for institutional, commercial/residential cleaning. Also ideal for septic tank, vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages, 1/2 HP motor. CSA approved., K-60SP-SE Includes:, K-60SP Machine, A-1 Operator s Mit, A-60-12 Rear guide hose, A-8 Cable Carrier, 5 Sections of C-10 7/8" Cable (75 ), T-101, T102 & T-125 Augers, T107 & T150-1 Cutters, A-3 Tool Box, A-12 Pin Key RIDGID
T1223.jpg 12" Propress Jaw
Locke Part #: T1223 MFG Part #: 76652
RIDGID
T338.jpg 12-R 1-1/2" Head With Die
Locke Part #: T0339 MFG Part #: 05634
REED MFG. COMPANY
T338.jpg 12-R 1-1/4" Head With Die
Locke Part #: T0338 MFG Part #: 05632
REED MFG. COMPANY
T338.jpg 12-R 2" Head With Die
Locke Part #: T0340 MFG Part #: 05636
REED MFG. COMPANY
T316.jpg 12-R Ratchet Threader
Locke Part #: T0318 MFG Part #: 05638
Drop head dies. Head locks in or releases by pull of ratchet knob. Separate sets of alloy steel chaser dies, quickly removed or reversed for close-to-wall threads. Ratchet and handle complete. REED MFG. COMPANY
T1032.jpg 2" Class 200, Sch. 40
Locke Part #: T1037 MFG Part #: J44200
Jones Stephen Cor
98040.jpg 2" Golden Pipe Shredder
Locke Part #: T2448 MFG Part #: 98041
Size: 2", Quantity: 4, Interleaved: 10021449980415, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges Rectorseal 021449980418
Allows You To Meet Requirements Of D.O.T. 192.283, Economical:, Far less expensive than Electric tools. Affordable!, Quick Line Repairs:, Allows fast, convenient, quality fusion., Portable:, Weighs only 3-1/2 lbs. reinforced coating., Durable No Stick Coating:, Stainless Steel., Interchangeable stub & socket:, One tool capable of fusing sizes 3/4", 1", 1-1/4" & 2"., Easy To Read Thermometer:, Large dial recessed in handle., Also: 1/2, "-4" combination STUB OR SOCKET tool also available. GEORG FISCHER CENTRAL PLASTICS
T40.jpg 2" Wing Nut Test Plug
Locke Part #: T0041 MFG Part #: T41
BETTER ENTERPRISE CO LTD
T115.jpg 2.00" Single-Size Test Ball
Locke Part #: T0116 MFG Part #: 270024
Oatey SCS
T692.jpg 28"- 52" V-Head High Pipe Stand
Locke Part #: T0692 MFG Part #: 06350
12" maximum pipe capacity, 2500 Lb. Max. weight capacity. Model VJ-99 V-Head High Pipe Stand: heavy-duty adjustable pipe stand, suitable for use with threading machines, roll groovers, etc. REED MFG. COMPANY
T1032.jpg 3" Class 200, Sch. 40
Locke Part #: T1038 MFG Part #: J44300
Jones Stephen Cor
98040.jpg 3" Golden Pipe Shredder
Locke Part #: T2449 MFG Part #: 98042
Size: 3", Quantity: 4, Interleaved: 10021449980422, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges Rectorseal 021449980425
RIDGID
T40.jpg 3" Wing Nut Test Plug
Locke Part #: T0042 MFG Part #: T42
BETTER ENTERPRISE CO LTD
RIDGID
T1032.jpg 3/4" Class 200, Sch.40 & 80
Locke Part #: T1033 MFG Part #: J44075
Jones Stephen Cor
T344.jpg 3/4" Die Only
Locke Part #: T0345 MFG Part #: 05608
REED MFG. COMPANY
Size: Single 3/4, Weight: 0.48 lbs, Quantity: 6, Interleaved: 10021449972519, Dimensions (in): 1 x 1 x 4, Cubic Feet: 0.14 The world s only self-locking, reversible, internal wrench, Can remove the most stubborn nipples, Works on Corroded Pipe, No thread damage, Self-Locking and Reversible, For use with Schedule 40 Pipe, Made of Heat Tempered Steel, Fits Standard 3/8 and 1/2 Ratchets, Patent # 6,675,679B2. WILDE TOOL CO INC 085432020024
T0943.jpg 3/4" Hand Crimper
Locke Part #: T0948 MFG Part #: ROS9203STS
SEARGANT
T0947.jpg 3/4" Hand Crimper
Locke Part #: T2478 MFG Part #: 18029
FLAIR-IT SALES
T4961.jpg 3/4" Installation Tool
Locke Part #: T4962 MFG Part #: 18151
The flair-it pro installation tool is used to install flair-it pro rings within seconds. This tool is compact and easy to use in tight spaces. There is no other system as fast and easy as the flair-it pro system. FLAIR-IT SALES
T1223.jpg 3/4" Jaw for Pex
Locke Part #: T1284 MFG Part #: 22968
RIDGID
T1223.jpg 3/4" Propress Jaw
Locke Part #: T1224 MFG Part #: 76657
RIDGID
T2458.jpg 3/4" Twist ‘N Seal Tool
Locke Part #: T2456 MFG Part #: 83783
Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! IPS Corporation
T490.jpg 3/4" x 100’ Sewer Tape
Locke Part #: T0491 MFG Part #: 62565
Quality, oil tempered, flat spring steel wire tape for cleaning all sizes of sewers & drains. Automatic grip handle helps force tapes back & forth easily. Tapes furnished with spear point on one end & roller ball point on the other. RIDGID
RIDGID
T483.jpg 3/8" x 35 Ft. Cable & Bulb Auger
Locke Part #: T0484 MFG Part #: 59255
Standard funnel auger is the second tool fed into the line blocked with roots. RIDGID
The only wrench capable of tightening the compression nut at the floor on a dishwasher. RIDGID
T263.jpg 3/8" x 50’ Auger w/handle
Locke Part #: T0263 MFG Part #: 710440
Hi-tensil spring wire with handle., 3/8" x 50' spiral gimlet head. GENERAL WIRE SPRING
T0565.jpg 3’ Cable Extension
Locke Part #: T0566 MFG Part #: 31128
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) RIDGID
T251.jpg 3’ Closet Auger
Locke Part #: T0252 MFG Part #: 59787
RIDGID
T0250.jpg 3’ Handle Closet Auger
Locke Part #: T0250 MFG Part #: 720050
Plated wire. Features sturdy wood handle, vinyl bowl guard, 1 piece integral auger head. 3 ft. long. GENERAL WIRE SPRING
GENERAL WIRE SPRING
GENERAL WIRE SPRING
l42103.jpg 3-1/2" Lead Pouring Ladle
Locke Part #: T0243 MFG Part #: L42103
Size: 3-1/2" Wrought steel Jones Stephen Cor
T115.jpg 3.00" Single-Size Test Ball
Locke Part #: T0117 MFG Part #: 270032
Oatey SCS
T274.jpg 30 lb. Air Pressure Gauge
Locke Part #: T0274 MFG Part #: T274
1/4" IPS, male thread 2-1/2" diameter BETTER ENTERPRISE CO LTD
T693.jpg 32"-55" Roller Head High Pipe Stand
Locke Part #: T0693 MFG Part #: 06352
12" maximum pipe capacity, 2500 Lb. Max. weight capacity. Model RJ-99 V-Roller Head High Pipe Stand: heavy-duty adjustable pipe stand, suitable for use with threading machines, roll groovers, etc. REED MFG. COMPANY
T2510.jpg 3rd Handle Ratchet Tool
Locke Part #: T2510 MFG Part #: ROS9253SCPDP
SEARGANT
T2510.jpg 3rd Handle Ratchet Tool
Locke Part #: T2519 MFG Part #: 18041
FLAIR-IT SALES
98040.jpg 4" Golden Pipe Shredder
Locke Part #: T2450 MFG Part #: 98043
Size: 4", Quantity: 4, Interleaved: 10021449980439, Dimensions (in): 13-1/2 x 10 x 4-1/2 Reams out solvent welded plastic fittings quickly so they can be reused, Carbide cutting blades, Unique guiding system, Made of heat tempered steel, One piece body, Cuts stub outs to be flush or recessed with wall, Removes cracked water closet flanges Rectorseal 021449980432
T1032.jpg 4" Sch. 40
Locke Part #: T1039 MFG Part #: J44400
Jones Stephen Cor
T40.jpg 4" Wing Nut Test Plug
Locke Part #: T0043 MFG Part #: T43
BETTER ENTERPRISE CO LTD
Size: 4-Way Key Plated steel, For valve, faucet and sillcock sizes 1/4", 9/32", 5/16" and 11/32", Carded Jones Stephen Cor
T115.jpg 4.00" Single-Size Test Ball
Locke Part #: T0118 MFG Part #: 270040
Oatey SCS
T483.jpg 5/16" x 25 Ft. Cable & Bulb Auger
Locke Part #: T0483 MFG Part #: 59250
Standard funnel auger is the second tool fed into the line blocked with roots. RIDGID
Size: 5/16" x 50’, Weight: 7 Lb. RIDGID
T1018.jpg 6" Smart Dumbbell
Locke Part #: T1018 MFG Part #: 4554
Heavy duty die-cast aluminum dumbbell installs or removes tub drains & closet spuds without crossbars. Fits all 17 modern tub configurations. Doesn t scratch finishes. Made in U.S.A. PASCO SPECIALTY & MFG INC
T1259.jpg 6’ Cable Extension
Locke Part #: T1259 MFG Part #: 37113
Size: 6’ RIDGID
T251.jpg 6’ Closet Auger
Locke Part #: T0251 MFG Part #: 59797
RIDGID
T333.jpg 68 lb. Torque Wrench
Locke Part #: T0333 MFG Part #: 02298
REED MFG. COMPANY
Weight: 0.80 lbs, Overall Length: 9-3/4’’ (248 mm), Handle Color: Red, Crimps: 10-22 AWG Accommodates wire from No. 10 to 22 AWG., Specially hardened wire cutter in nose., Tapered nose design for working in confined spaces., Crimping die marked for insulated and non-insulated solderless terminals and connectors., Plastic-dipped, cushioned handles for comfort. Klein Tools Inc
Weight: 0.85 lbs, Overall Length: 9-3/4’’ (248 mm), Handle Color: Black, Crimps: 10-22 AWG Designed for crimping non-insulated solderless terminals and connectors, Specially hardened wire cutter in nose., Tapered nose for working in confined spaces., Plastic-dipped cushioned handles for comfort. Klein Tools Inc
RIDGID
T0479art.jpg A-369-X Jaw Assembly for 1-1/4" Cable
Locke Part #: T0488 MFG Part #: 59320
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter RIDGID
T378.jpg A1 Left Hand Operators Mitt
Locke Part #: T0378 MFG Part #: 59205
Tough leather, heavily riveted for max. strength against rotating cable. RIDGID
T378.jpg A2 Right Hand Operators Mitt
Locke Part #: T0524 MFG Part #: 59295
Tough leather, heavily riveted for max. strength against rotating cable. RIDGID
T3136a.jpg Adjustable Crimp Tool
Locke Part #: T3136 MFG Part #: MT-25
ILSCO
T2445.jpg Basin Buddy Wrench
Locke Part #: T2445 MFG Part #: 1890002
Basin BUddy, Includes 3/8" ratchet adapter WAL-RICH CORP
T0253.jpg Basin Nut Wrench
Locke Part #: T0253 MFG Part #: 66807
RIDGID
T0255.jpg Basin Wrench
Locke Part #: T0255 MFG Part #: 11601
REED MFG. COMPANY
T395.jpg BC210 Top Screw Bench Chain Vise
Locke Part #: T0395 MFG Part #: 02510
Crank handle is anchored to base. Rugged cast-iron base has jaws of hardened alloy steel, handy pipe rest & bender. Capacities of 1/8"- 8". REED MFG. COMPANY
T395.jpg BC410 Top Screw Bench Chain Vise
Locke Part #: T0397 MFG Part #: 02520
Crank handle is anchored to base. Rugged cast-iron base has jaws of hardened alloy steel, handy pipe rest & bender. Capacities of 1/8"- 8". REED MFG. COMPANY
T395.jpg BC610 Top Screw Bench Chain Vise
Locke Part #: T0398 MFG Part #: 02540
Crank handle is anchored to base. Rugged cast-iron base has jaws of hardened alloy steel, handy pipe rest & bender. Capacities of 1/8"- 8". REED MFG. COMPANY
T0997.jpg Blade for T0997
Locke Part #: T4009 MFG Part #: B107
Southwire Company
Literature_HeaderImage-1-2000x550_c.jpg BRASS ANGLE METER KEY W/ LID REMOVER
Locke Part #: T0228 MFG Part #: 151-064
Skid Quantity: 1152, Inner Quantity: 4, Master Quantity: 32 Combo key, Combination water meter box key and cut off, Used to open meter boxes and turn water off at meter, Retailer request to complete plumbing project B&K LLC 032888510647
T1806.jpg Brass Compression Ring Remover
Locke Part #: T1806 MFG Part #: EBCRR
The fastest and easiest way to remove brass compression rings and ferrules when removing old, existing water shutoffs and angle stops. The Brass Compression Ring Remover simply splits the brass ring or ferrule. EBBCO / SAF-T-KUT
T0997.jpg BX Cable Cutter
Locke Part #: T0997 MFG Part #: RS-101AL
Southwire Company
T552A.jpg C-10 7/8" x 15’ All-Purpose Cable
Locke Part #: T0662 MFG Part #: 62275
Model K-60SP Machine with: Operator s Mit, Pin Key & Rear Guide Hose, Plus: Tool Kit & Cable Kit., A compact machine for institutional, commercial/residential cleaning. Also ideal for septic tank, vacuum truck operators. Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages, 1/2 HP motor. CSA approved., K-60SP-SE Includes:, K-60SP Machine, A-1 Operator s Mit, A-60-12 Rear guide hose, A-8 Cable Carrier, 5 Sections of C-10 7/8" Cable (75 ), T-101, T102 & T-125 Augers, T107 & T150-1 Cutters, A-3 Tool Box, A-12 Pin Key RIDGID
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter RIDGID
RIDGID
RIDGID
45 ft. - 6 lengths C-8 Open Wind Cable, A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 Grease "C" Cutter, A-13 Coupling Pin, A-14-6 Guide Hose RIDGID
T0489.jpg Clutch Jaw Assembly for K-50
Locke Part #: T0487 MFG Part #: 59450
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable RIDGID
B&K LLC
B&K LLC
It s rugged design and high tensile strength rubber lends itself to withstand higher pressures and to work effectively in larger pipes. Oatey SCS
It s rugged design and high tensile strength rubber lends itself to withstand higher pressures and to work effectively in larger pipes. Oatey SCS
Motor: 1/3 HP, 115V, 60Hz Induction Motor or 1/3 HP, 230V Induction Motor, Switch: Toggle On/Off, Copper and Stainless Steel Fittings Capacity: 1/2" - 2", Copper and Stainless Steel Tube Capacity: 1/2" - 2", Cutter Wheel: Model 2191 HD Wheel, Reamer: Single Flute Cone, RH, 1/2" to 2", Roller Speed: 450 RPM RIDGID
T2462.jpg Cuts off 1/2" - 3/4" Rings
Locke Part #: T2462 MFG Part #: ROS7407ESDP
SEARGANT
T0564.jpg Drain Cleaning Machine
Locke Part #: T0564 MFG Part #: 23692
RIDGID
T0479art.jpg Drain Cleaning Machine & Equipment
Locke Part #: T0479 MFG Part #: 23717
Includes:, 105 C-11 All-purpose cable, A3516 1/4" Hex Key, A-8 Cable Carriers (2), T-1 Straight Auger, A-34-10 Guide Hose, T-3 Funnel Auger, A-1 Operator s Glove, T-6 Retrieving Auger, A-3 Tool Box, T-8 Spade Auger, A-12 Coupling Pin Key, T-13 Sawtooth Cutter, A2864 (3/16 ) Hex Key, T-20 Sharktooth Cutter RIDGID
T1023a.jpg Drain Key With Aluminum Shoes
Locke Part #: T1023 MFG Part #: 4500
It s unique expanding design allows The Drain Key to internally grip in a 360 pattern. The drain Key s aluminum shoes will not mar chrome or special finishes. Installs and removes tub drains, closet spuds and pipe nipples., Expands with a crescent wrench to unlock or install:, Bathtub drains, 1-1/4 or 1-1/2 Trap (dirty arm) nipples, 1-1/4 or 1-1/2 closet spuds, Jr. basket strainers, Jr. duo strainers, tray plug drains and duplex strainers, Made in U.S.A. PASCO SPECIALTY & MFG INC
T1021.jpg Drain Wrench
Locke Part #: T1021 MFG Part #: 7095
Tightens most fiberglass shower stall drain locknuts and die cast baskets., Fits brass locknuts or brass shower stall drains, Fits 3-1/2 plastic locknuts, Fits 3-3/8 die cast basket strainer locknuts PASCO SPECIALTY & MFG INC
Elkay Mfg Co
T1031.jpg Eureka Wrench
Locke Part #: T1031 MFG Part #: 4567
This unique tool fits either slotted or square countersunk cleanout plugs. Strong, malleable iron PASCO SPECIALTY & MFG INC
T262A.jpg Flaring Tool; 45° SAE
Locke Part #: T0262 MFG Part #: 23332
Flares, sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" RIDGID
RIDGID
T1022.jpg Fost-Free Sillcock Extractor
Locke Part #: T1022 MFG Part #: SILCOCK EXTRACTOR
Extracts all non-accessible broken frost proof faucets to 14". No other tool can accomplish this task. Other uses include: extracts galvanized or steel nipples (1/4" - 1/2"), & extracts most faucet seats. Limited Lifetime warranty. FSC TOOL INC.
T254.jpg Fountain Wrench
Locke Part #: T0254 MFG Part #: 7047
2 in 1 Tool., A must for installing water fountain cartridges! Tightens or loosens cartridge retaining bushing. Prevents bushing thread damage which causes leaks. PASCO SPECIALTY & MFG INC
T478B.jpg GFI 15 Amp, 125 Volt Line Cord
Locke Part #: T0523 MFG Part #: 50507
Ideal for tough jobs up to 250 . Powerful, yet quiet universal motor & gearbox bear down as cutter engages tough obstructions., Specifications:, Powerful, yet quiet 4/10 HP, universal motor & gearbox, Cable spins at 200 RPM, CSA approved, Standard Accessories:, T-406 Spear Blade, T-407 Retrieving Auger, T-411 2" Double Cutter, T-413 3" Double Cutter, T408 Sawtooth Cutter, T403 3" P-Trap Cutter, T468 Flexible Leader, Leather Gloves, Tool Box & Hex Set, T-414B 4" Double Cutter (Blade only), T-416B 6" Double Cutter (Blade only) RIDGID
97258.jpg Golden Extractor Tub Drain Tool
Locke Part #: T2468 MFG Part #: 97258
Quantity: 3, Interleaved: 10021449972588, Dimensions (in): 10-1/4 x 5-1/4 x 6, Cubic Feet: 0.22 A unique tool that simplifies the removal of old tub drains even when cross arms are broken out or missing., Patented design utilizes a standard 3/8 drive ratchet to either extract or install tub drains quickly and easily., Use to install new tub drains, Built in bolt/screw remover, Universal size, Patent # 7,024,972., Patent # 7,024,972., Made of heat tempered steel, For extracting tub drains, Removes bolts/screws where the heads are broken off or just won t move Rectorseal 021449972581
Product Image Not Available Graphite Grease for Expander Tools 2.8oz
Locke Part #: R1579 MFG Part #: 49-08-2400
Milwaukee Electric
T0249.jpg Handle Remover
Locke Part #: T0249 MFG Part #: J40012
Removes large and small handles Economical yet tough,, 1 piece forged drive bracket, 4" bracket width, 5" gripper fingers Jones Stephen Cor
T2510.jpg Installation Ratchet Tool
Locke Part #: T2460 MFG Part #: ROS9252SCPDP
SEARGANT
T0783.jpg Intermediate Kit
Locke Part #: T0783 MFG Part #: 10006132
Includes:, Model SF3 Heater with high temp handle, Model SF3 Heater Muff, Clamp Bracket Assembly, 1-5/8" Capacity Ratchet Cutter, 3/4" IPS Socket Tooling Kit, 1-1/4" IPS plug and socket, 500 Temp-Stik, 525 Temp-Stik, Digital Countdown Timer, Wrench Hex Key 3/16", Wrench Hex Key Screwdriver 3/16", Professional Tool Box 26" Yellow and Black, Procedure Manual, Designed to provide you with the most coverage regardless of the job., The Intermediate Kit is designed to provide you with the most common sizes you need to make your installation quick and easy. GEORG FISCHER CENTRAL PLASTICS
T332.jpg Internal Wrench
Locke Part #: T0332 MFG Part #: 31405
RIDGID
Weight: 5 Lb., Pipe Capacity: 2-1/2" RIDGID
T477A.jpg K-39-1 115 Volt Drain Gun
Locke Part #: T0477 MFG Part #: 36013
5/16" or 35 of 3/8" RIDGID
SEARGANT
T0565.jpg Mini Ball Guide 10pack
Locke Part #: T0623 MFG Part #: 88392
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) RIDGID
T0489.jpg Model K-50, Machine Only
Locke Part #: T0482 MFG Part #: 58920
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable RIDGID
T0489.jpg Model K-50-8 115V Machine and Kit
Locke Part #: T0489 MFG Part #: 59000
1-1/4" to 4" lines up to 100 . Equipped with A-17 Adapter, runs up to 50 of 5/16" or 35 of 3/8" continuous length cable. Equipped with 6 HP motor. CSA approved., K-50-8 includes:, K-50 Machine, A-30 Cable Kit:, 6 Sections C-8, 7-1/2' x 5/8" Cable (45feet), A-10 Cable Carrier, T-201 Straight Auger, T-202 Bulb Auger, T-205 "C" Cutter, T-211 Spade Cutter, A-13 Coupling Pin Key, A-14-6 Rear Guide Hose, A-1 Left-Hand Mit, A-17-A, adapter includes:, 5/16 x 25 C-1 Bulb Auger Cable, A-17-B, adapter includes:, 3/8" x 45 C-5 Bulb Auger Cable RIDGID
T478B.jpg Model K-7500 Power Feed Drain Cleaner
Locke Part #: T0478 MFG Part #: 60052
Ideal for tough jobs up to 250 . Powerful, yet quiet universal motor & gearbox bear down as cutter engages tough obstructions., Specifications:, Powerful, yet quiet 4/10 HP, universal motor & gearbox, Cable spins at 200 RPM, CSA approved, Standard Accessories:, T-406 Spear Blade, T-407 Retrieving Auger, T-411 2" Double Cutter, T-413 3" Double Cutter, T408 Sawtooth Cutter, T403 3" P-Trap Cutter, T468 Flexible Leader, Leather Gloves, Tool Box & Hex Set, T-414B 4" Double Cutter (Blade only), T-416B 6" Double Cutter (Blade only) RIDGID
Product Image Not Available Natural Fib-R-Fix Kit
Locke Part #: M0739 MFG Part #: 05-F2002
Repair chips, cracks and small holes in fiberglass and acrylic showers and baths NORMAN MENAKER
T2511.jpg Oetiker Clamp Buster
Locke Part #: T2511 MFG Part #: ROS9255PRT
This sturdy socket tool removes all sizes of Oetiker stainless steel clamps with ease!, Just slide the ear into the opening and twist it off! SEARGANT
Hose Length: 2,6 m ( 5,2 m span), Refrigerant: R-507, Capacity (Copper Tube): 1/2" x 2-1/2", Capacity (Steel Pipe): 1/2" x 2", Compressor: Rotary, 230V, 50 Hz, 2.4A, 505W, Dimensions LxWxH: 22-7/8" x 11" x 14-1/2" RIDGID
T0212.jpg Plug Wrench
Locke Part #: T0212 MFG Part #: 390-50198
Malleable iron, bright finish. Holds pinup plugs and basket strainers in position & keeps them from turning while installation is being made. Sioux Chief Mfg
T399A.jpg Portable Tri-Stand Chain Vise
Locke Part #: T0399 MFG Part #: 02306
REED MFG. COMPANY
The Uponor ProPEX 201 Corded Expander Tool meets the need for reliable, cost-effective solutions to commercial-sized 2" PEX installations., This 110-volt, electro-hydraulic tool makes fast, easy connections for 2" Uponor PEX tubing., The ProPEX 201 Corded Expander Tool uses the same 2" H-series expander heads currently in use with other Uponor tools., ProPEX 201 Corded Expander Tool Kit includes 2" head. Uponor
T0002.jpg ProPEX Expander
Locke Part #: T0002 MFG Part #: Q6295075
Uponor
Product Image Not Available Propress Tool
Locke Part #: T1220 MFG Part #: 43358
RIDGID
T2527.jpg Push Fitting Pliers
Locke Part #: T2527 MFG Part #: 77050
For All Types of Push-Lock Fittings, Fast and easy removal of push-lock fittings., Works on all types of 3/8", 1/2" and 3/4" pushlock fittings., Works on copper, PEX and CPVC materials., Heavy-Duty Design - Spring action., Ideal for hard to access areas. Mill Rose Company
T2517.jpg QickClamp Crimp Ring Tool
Locke Part #: T2517 MFG Part #: QCRTQCM
ZURN PEX. INC
T264A.jpg Ratchet Flare Tool; 45° SAE
Locke Part #: T0264 MFG Part #: 83037
Flares, sizes: 1/8", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" RIDGID
T2469.jpg Razorback Wrench
Locke Part #: T2469 MFG Part #: 73055
Remove shower and sink drains from the top or bottom with just one hand!, Eliminates the need for all other, Box End, wrenches, Fits most common styles of brass & plastic shower / sink drains, T handle rotates 180 for easy access and maximum leverage, Ideal for working in tight areas, Made of extremely durable, high impact polycarbonate polyester, Ideal for retrofits and new installations Mill Rose Company
RIDGID
RIDGID
T2510.jpg Refurbish Kit For T2460 & T2510
Locke Part #: T2454 MFG Part #: 40006
FLAIR-IT SALES
T555.jpg Remote Transmitter
Locke Part #: T0555 MFG Part #: 16728
The Remote Transmitter is an accessory for the KD-4510 (T0553) & KD-4550 (T0559) Pointer TM Line Locating Equipment. It can be attached to drain cleaning cables, jetter hoses, or other pushing devices. RIDGID
Uponor
T381.jpg Replacement Jawset for K-60SP
Locke Part #: T0381 MFG Part #: 65687
RIDGID
It s rugged design and high tensile strength rubber lends itself to withstand higher pressures and to work effectively in larger pipes. Oatey SCS
HOLDUPTOOL.jpg Rotor Hold-Up Tool With Bubble Level
Locke Part #: S0255 MFG Part #: HOLDUPTOOL
Pricing Category: SR06, Stock or OAN: s, Description2: W/ BUBBLER LEVEL Combination holdup tool and bubble level makes proper rotor installation easier, Works with Rain Bird 5000 Series, 5500 Series, Falcon 6504, 7005 and 8005 Series Rotors RAIN BIRD CORP
ROTORTOOL.jpg Rotor Screwdriver & Pull-Up Tool
Locke Part #: S0256 MFG Part #: ROTORTOOL
Pricing Category: SR06, Stock or OAN: s, Description2: W/ PULL UP FEATURE The universal Rain Bird rotor tool., Flat blade screwdriver and pull-up tool all in one. RAIN BIRD CORP
T0431.jpg RT-100 115V Mini-Pro Soldering Gun
Locke Part #: T0431 MFG Part #: 69762
Designed for soft soldering (50/50, 95/5 Alloys) 1/4" - 1-1/2" Copper Tube. Six feet of cable., Flameless soldering easy-to-use., Built-in handle and cord wrap., Specially designed for repair and renovation jobs., Approved by CSA to CSA and UL standards (115V only). RIDGID
T0336.jpg RT-175 115V Electric Soldering Gun
Locke Part #: T0336 MFG Part #: 62862
Soft solders 1/4" - 3" tube., Flameless soldering-easy-to-use., Twelve feet of cable., Fully contained in metal carrying case., Approved by CSA to CSA and UL standards (115V only). RIDGID
T0565.jpg SeeSnake® Micro™ Inspection Camera
Locke Part #: T0565 MFG Part #: 36848
Camera, Diameter:, 0.7" (17 mm), Lighting:, 2 Adjustable LEDs, Cable Reach:, 3' (expandable to 30' with optional extensions), Water, proof:, Camera & Cable to 10', ( when properly assembled), Power, Source:, 4 AA Batteries (3 hours of, continuous run-time), Mirror, Hook & Magnet, Weight:, 1.2 lbs (0.5 kg) RIDGID
RIDGID
T61.jpg Short Water Meter Lid Key
Locke Part #: T0061 MFG Part #: 111
SPECIALTY SALES & MFG CO INC
T999.jpg Sloan "Super Wrench"
Locke Part #: T0999 MFG Part #: 0301255
Fits Sloan valve parts to service & repair valves without damaging the finish or value. Sloan Valve Co
T0218.jpg Socket Wrench Set
Locke Part #: T0218 MFG Part #: T218
5 sockets with handle & holding pin BETTER ENTERPRISE CO LTD
A466.jpg Square End
Locke Part #: A0466 MFG Part #: 08-0401
Tapered Angle Seat Wrench KISSLER & CO
T1019.jpg Stem & Cartridge Puller
Locke Part #: T1019 MFG Part #: 7040
Removes Moen stems and Moen cartridges from faucets and shower valves. Removes brass cartridges. Removes brass stems. Removes plastic stems & cartridges. Precision made. High quality steel components. One piece construction. Easy to use. Made in U.S.A. PASCO SPECIALTY & MFG INC
RIDGID
T0217.jpg Telescoping Urinal Auger
Locke Part #: T0217 MFG Part #: 262020
Gets through urinals where other snakes can't. A specially designed spring has the toughness and flexibility to negotiate tight urinal bends. Telescoping Teletube model TU4 features a 48" spring for clearing stoppages beyond the urinal. GENERAL WIRE SPRING
Model: 83764 IPS Corporation 12181837641
Model: 83687 Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! IPS Corporation 12181836873
Model: 83765 IPS Corporation 12181837658
Model: FCRP3 Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! IPS Corporation 12181836880
Model: 83766 IPS Corporation 12181837665
Model: FCRP35 Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! IPS Corporation 12181836897
Model: FCRP4 Designed for use in cast iron fittings where threads have been damaged. The unique design of this product seals behind the threads to provide an air tight seal in all brands of fittings., Holds up to 50 feet of backpressure!, Seals air tight! (Does not rely on threads to seal.), Back pressure actually increases sealing ability!, Completely flush inside and out!, Cannot fall into the pipe!, Comes with wrench! IPS Corporation 12181836903
Model: 83767 IPS Corporation 12181837672
Model: MCO2 Designed for use in a cleanout to test up to 40 vertical feet of pipe. No tools or equipment are required for a quick installation. With its clear cap, water can be released without splashing out of the cleanout., Clear cap provides a window to monitor the test media as it drains, Expandable rubber gasket provides air and water tight seal, Durable design; plated steel parts will not rust, No tools, hoses, or gauges are required for installation, Hand tighten in seconds IPS Corporation 12181836569
Model: MCO3 Designed for use in a cleanout to test up to 40 vertical feet of pipe. No tools or equipment are required for a quick installation. With its clear cap, water can be released without splashing out of the cleanout., Clear cap provides a window to monitor the test media as it drains, Expandable rubber gasket provides air and water tight seal, Durable design; plated steel parts will not rust, No tools, hoses, or gauges are required for installation, Hand tighten in seconds IPS Corporation 12181836576
Model: MCO4 Designed for use in a cleanout to test up to 40 vertical feet of pipe. No tools or equipment are required for a quick installation. With its clear cap, water can be released without splashing out of the cleanout., Clear cap provides a window to monitor the test media as it drains, Expandable rubber gasket provides air and water tight seal, Durable design; plated steel parts will not rust, No tools, hoses, or gauges are required for installation, Hand tighten in seconds IPS Corporation 12181836583
Model: 83785 Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! IPS Corporation 12181837856
Model: 83791 Stop water flow while soldering or cementing pipe and fittings! Holds up to 60 psi. Quick and easy to use! Simple to change sizes - just unscrew rubber seal and replace., No Tools Required! IPS Corporation 12181837917
R1773.jpg Tube Cutter
Locke Part #: R1773 MFG Part #: E6081128
Uponor
Product Image Not Available White Fib-R-Fix Kit
Locke Part #: M0738 MFG Part #: 05-F2001 WHITE
Repair chips, cracks and small holes in fiberglass and acrylic showers and baths NORMAN MENAKER