The Caseta Wireless in-wall dimmer provides dimming of multiple load types and allows remote control and occupancy / vacancy sensing when paired with wireless transmitting devices.
Lutron patented Clear Connect RF Technology works through walls and floors.
Includes Front Accessible Service Switch (FASST) for safe lamp replacement.
Two-wire dimmer ideal for retrofit applications. No neutral required.
Power failure memory: If power is interrupted, the control will return to its previously set level prior to interruption.
Works with dimmable LEDs and CFLs as well as incandescent and halogen light bulbs.
Key Design Features:
Tested to withstand electrostatic discharge without damage or memory loss, in accordance with IEC 61000-4-2.
Tested to withstand surge voltages without damage or loss of operation, in accordance with IEEE C62.41-1991 Recommended Practice on Surge Voltages in Low-Voltage AC Power Circuits.
Dimmers always operate locally and do not require system control.
Power failure memory: should power be interrupted, the control will return to its previously set level prior to the interruption when power is restored.
Uses Lutron Claro wallplates or designer-style wallplates from other manufacturers. Wallplates are sold separately.
Lutron Claro wallplates snap on with no visible means of attachment.
Requires a 1-gang U.S. wallbox. 31/2 in (89 mm) deep recommended, 21/4 in (57 mm) deep minimum.
Green LEDs indicate load status. System Communications and Capacity
The Caseta Wireless in-wall dimmer communicates with the Pico remote controls and Radio Powr Savr sensors through radio frequency (RF).
The Caseta Wireless in-wall dimmer must be located within 60 ft (18 m) line-of-sight or 30 ft (9 m) through walls, of Pico remote controls and Radio Powr Savr sensors.
Up to ten transmitting devices may be associated to each in-wall dimmer.
Approvals:
cULus Listed
NOM certified
FCC Approved. Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules